A review on applications of liposomes in textile processing

Prioritization, Identification, and Quantification of Emerging Contaminants in Recycled Textiles Using Non-Targeted and Suspect Screening Workflows by LC-ESI-HRMS

Recycled textiles are becoming widely available to consumers as manufacturers adopt circular economy principles to reduce the negative impact of garment production. Still, the quality of the source material directly impacts the final product, where the presence of harmful chemicals is of utmost concern. Here, we develop a risk-based suspect and non-targeted screening workflow for the detection, identification, and prioritization of the chemicals present in consumer-based recycled textile products after manufacture and transport. We apply the workflow to characterize 13 recycled textile products from major retail outlets in Sweden. Samples were extracted and analyzed by liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS). In positive and negative ionization mode, 20,119 LC-HRMS features were detected and screened against persistent, mobile, and toxic (PMT) as well as other textile-related chemicals. Six substances were matched with PMT substances that are regulated in the European Union (EU) with a Level 2/3 confidence. Forty-three substances were confidently matched with textile-related chemicals reported for use in Sweden. For estimating the relative priority score, aquatic toxicity and concentrations were predicted for 7416 features with tandem mass spectra (MS2) and used to rank the non-targeted features. The top 10 substances were evaluated due to elevated environmental risk linked to the recycling process and potential release at end-of-life.

Self-organization in an Open Reaction Network for Developing High-function Organized Molecular Systems

Self-organized molecular systems such as liposomes and supramolecules have attracted considerable attention due to their characteristic properties. An open reaction network (ORN) is another interesting candidate for such systems; however, no stabilization mechanism has been clarified. This work reveals, by computer simulation and experiments, that a network of irreversible processes such as an ORN can be stabilized by self-organization through a full balance between all the involved irreversible processes, thus forming a steady state. The formation of a steady state indicates that a large spontaneous order is formed; specifically, self-organization occurs. Computer simulations also reveal that such a steady state characteristically evolves toward a high-efficiency state through the development of highly ordered structures. These findings indicate that ORN provides a new method for developing high-function organized molecular systems, such as an efficient catalytic system in a composite of ORN and equilibrium molecular structures such as supramolecules and polymers.

Sustainable Hues: Exploring the Molecular Palette of Biowaste Dyes through LC-MS Metabolomics

Underutilized biowaste materials are investigated for their potential as sustainable textile colorants through an approach based on mass spectrometry, bioinformatics, and chemometrics. In this study, colorful decoctions were prepared from the outer bark of Eucalyptus deglupta and fruit peels of Syzygium samarangense, Syzygium malaccense, Diospyros discolor, and Dillenia philippinensis. Textile dyeing was performed along with liquid chromatography-mass spectrometry (LC-MS)-based untargeted metabolomics to determine the small molecules responsible for the observed colors. Global Natural Products Social Molecular Networking (GNPS) guided the annotation of black-producing proanthocyanidins in D. philippinensis and E. deglupta through complexation with FeSO4 mordant. Flavonoids from the yellow-colored D. philippinensis extracts were found to be similar to those in Terminalia catappa, a known traditional dye source. A higher intensity of epicatechin in E. deglupta produced a red-brown color in the presence of Cu2+. Furthermore, Syzygium fruit peels have poor wash-fastness in cotton fibers, but bioactive chalcone unique to S. samarangense samples may be a potential nutritional food colorant. Unsupervised PCA and supervised OPLS-DA chemometrics distinguished chemical features that affect dyeing properties beyond the observed color. These findings, along with growing data on natural dyes, could guide future research on sustainable colorants.

Novel Delivery Systems of Polyphenols and Their Potential Health Benefits

Liposome-based delivery systems have been studied and used more frequently in recent years due to their advantages, such as low toxicity, specificity, and the ability to protect the encapsulated substance from environmental factors, which could otherwise degrade the active compound and reduce its effectiveness. Given these benefits, many researchers have encapsulated polyphenols in liposomes, thus increasing their bioavailability and stability. Similarly, polyphenols encapsulated in liposomes are known to produce more substantial effects on targeted cells than unencapsulated polyphenols, while having minimal cytotoxicity in healthy cells. Although polyphenols play a role in preventing many types of disease and generally have beneficial effects on health, we solely focused on their chemopreventive effects on cancer through liposomes in this review. Our goal was to summarize the applicability and efficacy of liposomes encapsulated with different classes of polyphenols on several types of cancer, thus opening the opportunity for future studies based on these drug delivery systems.

Ecological and cleaner process for dyeing bicomponent polyester filaments (PET/PTT) using ecological carriers: analysis of dyeing performance

Thanks to their excellent properties, bicomponent filaments, in particular, polyethylene terephthalate (PET)/polytrimethylene terephthalate (PTT) are more and more used in stretchable clothing. Despite the researchers' efforts, the dyeing of these filaments still presents several problems which should be resolved. Manufacturers must choose between dyeing polyester under pressure at high temperatures (close to 130 °C) to have less toxic and cheaper textile effluents and/or dyeing at low temperatures (not exceeding 100 °C) which needs the use of toxic carriers. This paper presents a new opportunity and the feasibility of dyeing bicomponent polyester filaments using an economic and clean process at a temperature equal to 100 °C and by replacing toxic carriers by ecological ones. Three kinds of ecological carriers, namely o-Vanillin, p-Vanillin and Coumarin, are used to improve the dyeing performance of bicomponent filaments with three disperse dyes having different molecular weights. They were compared to three conventional ones largely used in industry. The effect of each carrier on dyeing performance (dye bath exhaustion, color strength and CIELab coordinates) was then investigated. The obtained results prove that ecofriendly carriers constitute a good solution to replace the toxic ones and allow to obtain the same, or even better dyeing performance and fastness properties.

Comparative release kinetics of small drugs (ibuprofen and acetaminophen) from multifunctional mesoporous silica nanoparticles

Multifunctional mesoporous silica nanoparticles (MSNs) can confer dynamically varied release kinetics depending on the intermolecular interactions between model drugs and functional decorations on the MSNs. Herein, brush-like fluorescent conjugates were grafted on the pore walls of pristine MSNs for high drug loading and to impart fluorescence properties. The fluorescent MSNs (FMSNs) were further coated with polydopamine (PDA) and graphene oxide (GO) double layer, designated FMSNs@PDA and FMSNs@PDA@GO, respectively. The FMSNs@PDA@GO exhibited highly consistent drug release over one week (∼7 days) because of the consolidated PDA/GO double layer at neutral pH (7.4). However, the release rate of FMSN-Ibu@PDA@GO was increased at acidic pH (5.5) because the PDA/GO double layer was partially disrupted due to weakened π-π stacking and electrostatic interactions. The release kinetics of the FMSNs-based NPs (FMSNs, FMSNs@PDA, and FMSNs@PDA@GO) were systematically investigated using negatively charged hydrophobic ibuprofen and neutral hydrophilic acetaminophen at pH 7.4. In the FMSN-drug system, the release rate of acetaminophen was higher than that of ibuprofen because of the higher solubility of acetaminophen in aqueous solution. In addition, ibuprofen has a bulky molecular structure compared to acetaminophen, leading to its slower transmission through the porous channels of FMSNs. In the FMSNs-drug@PDA system, acetaminophen exhibited a slower release rate than ibuprofen, owing to the π-π stacking interactions in the transmission of neutral acetaminophen by the PDA coating layer. On the other hand, the FMSNs-drug@PDA@GO exhibited a slower ibuprofen release rate than acetaminophen, owing to the electrostatic repulsion effect of the negative GO layer. Our drug delivery system was demonstrated as an advanced delivery platform, in which the transmission rate is controlled by intermolecular interactions between the diffusing drugs and functional decorations on the nanocarrier.

Textile Materials Modified with Stimuli-Responsive Drug Carrier for Skin Topical and Transdermal Delivery

Textile materials, as a suitable matrix for different active substances facilitating their gradual release, can have an important role in skin topical or transdermal therapy. Characterized by compositional and structural variety, those materials readily meet the requirements for applications in specific therapies. Aromatherapy, antimicrobial substances and painkillers, hormone therapy, psoriasis treatment, atopic dermatitis, melanoma, etc., are some of the areas where textiles can be used as carriers. There are versatile optional methods for loading the biologically active substances onto textile materials. The oldest ones are by exhaustion, spraying, and a pad-dry-cure method. Another widespread method is the microencapsulation. The modification of textile materials with stimuli-responsive polymers is a perspective route to obtaining new textiles of improved multifunctional properties and intelligent response. In recent years, research has focused on new structures such as dendrimers, polymer micelles, liposomes, polymer nanoparticles, and hydrogels. Numerous functional groups and the ability to encapsulate different substances define dendrimer molecules as promising carriers for drug delivery. Hydrogels are also high molecular hydrophilic structures that can be used to modify textile material. They absorb a large amount of water or biological fluids and can support the delivery of medicines. These characteristics correspond to one of the current trends in the development of materials used in transdermal therapy, namely production of intelligent materials, i.e., such that allow controlled concentration and time delivery of the active substance and simultaneous visualization of the process, which can only be achieved with appropriate and purposeful modification of the textile material.

Liposomes: From Bangham to Supercritical Fluids

Liposomes are spherical vesicles made up of an aqueous core surrounded by phospholipids. These delivery systems (DS) are largely employed as drug carriers in several industrial fields, such as pharmaceutical and nutraceutical fields. The aim of this short review is to provide a fast overview on the main fundamentals of liposomes, thought as a compact guide for researchers and students that want to approach this topic for the first time. The mini-review will focus on the definitions, production methods and characterization protocols of the liposomes produced, making a critical comparison of the main conventional and supercritical based manufacturing methods available. The literature was analyzed deeply from the first works by Dr. Bangham in 1965 to the most recent supercritical fluid applications. The advantages and disadvantages of conventional and high-pressure processes will be described in terms of solvent elimination, production at the nanometric (50–300 nm) and micrometric level (1–100 μm) and encapsulation efficiency (20–90%). The first proposed methods were characterized by a low encapsulation efficiency (20–40%), resulting in drug loss, a high solvent residue and high operating cost. The repeatability of conventional processes was also low, due to the prevalent batch mode. Supercritical-assisted methods were developed in semi-continuous layouts, resulting in an easy process scale-up, better control of liposome dimensions (polydispersity index, PDI) and also higher encapsulation efficiencies (up to 90%).

Low-Temperature Biosurfactants from Polar Microbes

Surfactants, both synthetic and natural, are used in a wide range of industrial applications, including the degradation of petroleum hydrocarbons. Organisms from extreme environments are well-adapted to the harsh conditions and represent an exciting avenue of discovery of naturally occurring biosurfactants, yet microorganisms from cold environments have been largely overlooked for their biotechnological potential as biosurfactant producers. In this study, four cold-adapted bacterial isolates from Antarctica are investigated for their ability to produce biosurfactants. Here we report on the physical properties and chemical structure of biosurfactants from the genera Janthinobacterium, Psychrobacter, and Serratia. These organisms were able to grow on diesel, motor oil, and crude oil at 4 °C. Putative identification showed the presence of sophorolipids and rhamnolipids. Emulsion index test (E24) activity ranged from 36.4-66.7%. Oil displacement tests were comparable to 0.1-1.0% sodium dodecyl sulfate (SDS) solutions. Data presented herein are the first report of organisms of the genus Janthinobacterium to produce biosurfactants and their metabolic capabilities to degrade diverse petroleum hydrocarbons. The organisms' ability to produce biosurfactants and grow on different hydrocarbons as their sole carbon and energy source at low temperatures (4 °C) makes them suitable candidates for the exploration of hydrocarbon bioremediation in low-temperature environments.

A hybrid 3D-printed aspirin-laden liposome composite scaffold for bone tissue engineering

Bone defects are some of the most difficult injuries to treat in clinical medicine. Evidence from cellular and animal studies suggests that aspirin exhibits protective effects on bone by promoting both the survival of osteoblast precursor stem cells and osteoblast differentiation. However, acquired resistance to aspirin and its cytotoxicity significantly limit its therapeutic application. Controlled release systems have been confirmed to promote the efficacy of certain drugs for bone regeneration. Additionally, the controlled release of a high dose of drug allows for lower dosing over an extended period. In this way, nano-liposomal encapsulation of aspirin can be used to reduce the cytotoxicity of the overall dose. Using a series of osteogenic experiments, this study found that an aspirin-laden liposome delivery system (Asp@Lipo) obviously promoted osteogenesis and immunomodulation of human mesenchymal stem cells (hMSCs). We also studied the in vitro capacity of polycaprolactone (PCL)-based bioactive composite (PCL-Asp@Lipo) scaffolds to facilitate cell proliferation and osteoblast differentiation. Compared to a common scaffold, ALP assays, immunofluorescence and calcium mineralisation studies revealed that the PCL-Asp@Lipo scaffolds enhanced the osteogenic differentiation of hMSCs. Subsequently, along with the cells, PCL and PCL-Asp@Lipo scaffolds were both implanted subcutaneously into nude mice for estimation of osteo-inductivity after 6 weeks, the PCL-Asp@Lipo composite scaffold exhibited more osteogenic activity than the bare PCL scaffold. This approach has potential applications in bone tissue repair and regenerative medicine.

Nanoparticle vaccines against viral infections

Despite numerous efforts, we still do not have prophylactic vaccines for many clinically relevant viruses, such as HIV, hepatitis C virus, Zika virus, and respiratory syncytial virus. Several factors have contributed to the current lack of effective vaccines, including the high rate of viral mutation, low immunogenicity of recombinant viral antigens, instability of viral antigenic proteins administered in vivo, sophisticated mechanisms of viral immune evasion, and inefficient induction of mucosal immunity by vaccine models studied to date. Some of these obstacles could be partially overcome by the use of vaccine adjuvants. Nanoparticles have been intensively investigated as vaccine adjuvants because they possess chemical and structural properties that improve immunogenicity. The use of nanotechnology in the construction of immunization systems has developed into the field of viral nanovaccinology. The purpose of this paper is to review and correlate recent discoveries concerning nanoparticles and specific properties that contribute to the immunogenicity of viral nanoparticle vaccines, bio-nano interaction, design of nanoparticle vaccines for clinically relevant viruses, and future prospects for viral nanoparticle vaccination.

Bioactive polymeric formulations for wound healing

Ricinoleic acid (RA) has potential to promote wound healing because of its analgesic and anti-inflammatory properties. This study investigates the synthesis and characterization of RA liposomes infused in a hydrogel for topical application. Lecithin liposomes containing RA were prepared and incorporated into a chitosan solution and were subsequently cross-linked with dialdehyde β-cyclodextrin (Di-β-CD). Chitosan/Di-β-CD concentrations and reaction temperatures were varied to alter gelation time, water content, and mechanical properties of the hydrogel in an effort to obtain a wide range of RA release profiles. Hydrogel cross-linking was confirmed by spectroscopy, and liposome and carrier hydrogel morphology via microscopy. Chitosan, Di-β-CD, and liposome concentrations within the formulation affected the extent of matrix swelling, mechanical strength, and pore and overall morphology. Higher cross-linking density of the hydrogel led to lower water uptake and slower release rate of RA. Optimized formulations resulted in a burst release of RA followed by a steady release pattern accounting for 80% of the encapsulated RA over a period of 48 hours. However, RA concentrations above 0.1 mg/mL were found to be cytotoxic to fibroblast cultures in vitro because of the oily nature of RA. These formulations promoted wound healing when used to treat full thickness skin wounds (2 cm²) in Wister male rats. The wound contraction rates were significantly higher compared to a commercially available topical cream after a time period of 21 days. Histopathological analysis of the RA-liposomal chitosan hydrogel group showed that the epidermis, dermis, and subcutaneous skin layers displayed an accelerated yet normal healing compared to control group.

Pyrazole-based compounds in chitosan liposomal emulsion for antimicrobial cotton fabrics

The chemistry of pyrazoles has gained increasing attention due to its diverse pharmacological properties such as antiviral, antagonist, antimicrobial, anticancer, anti-inflammatory, analgesic, anti-prostate cancer, herbicidal, acaricidal and insecticidal activities. 1-Phenyl pyrazole-3, 5-diamine, 4-[2-(4-methylphenyl) diazenyl] and 1H- pyrazole-3 (1), 5-diamine, 4-[2-(4-methylphenyl) diazenyl] (2) were synthesized, characterized and encapsulated into liposomal chitosan emulsions for textile finishing. The chemical modifications of cotton fabrics were demonstrated by infrared analysis. Retention of the fabric mechanical properties was investigated by reporting the tensile strength values. Synthesized pyrazole-based compounds were screened for cytotoxicity against skin fibroblast cell line and showed very limited toxicity for both compounds. Antimicrobial potentials of the treated cotton fabrics were tested against bacterial strains E. coli ATCC 8379 and Staphylococcus aureus ATCC 25923.

Design and Characterization of a Therapeutic Non-phospholipid Liposomal Nanocarrier with Osteoinductive Characteristics To Promote Bone Formation

Sterosomes are recently developed types of non-phospholipid liposomes formed from single-chain amphiphiles and high content of sterols. Although sterosomes presented significantly increased stability compared to conventional phospholipid liposomes, current sterosome biomaterials are not truly bioactive and have no intrinsic therapeutic effects. The purpose of this study was to develop a sterosome formulation with osteoinductive properties by an effective selection of sterol, one of the sterosome components. Oxysterols are oxidized derivatives of cholesterol and are known to stimulate osteogenesis and bone formation. Thus, 20S-hydroxycholesterol (Oxy), one of the most potent oxysterols for bone regeneration, was examined as a promising candidate molecule to form fluid lamellar phases with a single-chain amphiphile, namely, stearylamine (SA). First, the optimal composition was identified by investigating the phase behavior of SA/Oxy mixtures. Next, the capacity of the optimized SA/Oxy sterosomes to promote osteogenic differentiation of bone marrow stromal cells was assessed in vitro in a hydrogel environment. Furthermore, we explored the effects of osteogenic oxysterol sterosomes in vivo with the mouse critical-sized calvarial defect model. Our results showed that SA/Oxy sterosomes induced osteogenic differentiation in vitro and enhanced calvarial healing without delivery of additional therapeutic agents, indicating their intrinsic bone-forming potential. This study suggests a promising non-phospholipid liposomal platform with osteoinductive properties for delivery of small molecular drugs and/or other therapeutic genes for enhanced bone formation.

A novel biocompatible antibacterial product: Nanoliposomes loaded with poly(hexamethylene biguanide chloride)

In this study, nanoliposome-loaded poly(hexamethylene biguanide) is introduced as a novel biocompatible antibacterial product with higher activity than microliposomes. Soy lecithin as a clean product was used to prepare various nanoliposomes through sonication, high-pressure homogenizer, and normal homogenizer and also microliposomes through two methods of lipid film hydration and incubation methods. The nanoliposomes were formed under sonication with the size of 50 nm. The prepared liposomes were then loaded with poly(hexamethylene biguanide chloride) and the inclusion percentage was measured. The release profile of liposomes in buffer showed a release of 92% for poly(hexamethylene biguanide) during 24 h. The loaded liposomes were characterized with particle size analyzer, nuclear magnetic resonance, X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The antibacterial properties of different micro and nanoliposomes were investigated against a Gram-negative ( Escherichia coli) and a Gram-positive ( Staphylococcus aureus) bacteria. The poly(hexamethylene biguanide)–loaded nanoliposomes indicated higher antibacterial activities than microliposomes. Nanoliposomes have the potential to entrap lower poly(hexamethylene biguanide) dosages while retaining optimum therapeutic efficacy in the target site having lower cytotoxicity with lower side effects. The cytotoxicity of poly(hexamethylene biguanide) entrapped in liposomes was studied in human dermal fibroblasts and compared with free poly(hexamethylene biguanide) and blank liposomes. The maximum cytotoxicity was observed for free poly(hexamethylene biguanide) that is substantially decreased through loading within liposomes structure. Overall, the encapsulation of poly(hexamethylene biguanide) in liposomes improved the biocompatibility and safety of the product introducing a useful biocompatible antibacterial polymer for treatments of infectious diseases.

Salicylic acid derivatives as potential anti asthmatic agents using disease responsive drug delivery system for prophylactic therapy of allergic asthma

Asthma is a multi-factorial and complicated lung disorder of the immune system which has expanded to a wider ambit unveiling its etiology to be omnipresent at both ends of the spectrum involving basic pharmacology and in-depth immunology. As asthma occurs through triggered activation of various immune cells due to different stimuli, it poses a great challenge to uncover specific targets for therapeutic interventions. Recent pharmacotherapeutic approaches for asthma have been focused on molecular targeting of transcription factors and their signaling pathways; mainly nucleus factor kappa B (NFκB) and its associated pathways which orchestrate the synthesis of pro-inflammatory cytokines (IL-1β, TNF-α, GM-CSF), chemokines (RANTES, MIP-1a, eotaxin), adhesion molecules (ICAM-1, VCAM-1) and inflammatory enzymes (cyclooxygenase-2 and iNOS). 5-aminosalicylic acid (5-ASA) and sodium salicylate are known to suppress NFκB activation by inhibiting inhibitor of kappa B kinase (IKκB). In order to target the transcription factor, a suitable carrier system for delivering the drug to the intracellular space is essential. 5-ASA and sodium salicylate loaded liposomes incorporated into PEG-4-acrylate and CCRGGC microgels (a polymer formed by crosslinking of trypsin sensitive peptide and PEG-4-acrylate) could probably suit the needs for developing a disease responsive drug delivery system which will serve as a prophylactic therapy for asthmatic patients.

Delivery of siRNA via cationic Sterosomes to enhance osteogenic differentiation of mesenchymal stem cells

Noggin is a specific antagonist of bone morphogenetic proteins (BMPs) that can prevent the interaction of BMPs with their receptors. RNA interfering molecules have been used to downregulate noggin expression and thereby stimulate BMP signaling and osteogenesis. Cationic liposomes are considered one of the most efficient non-viral systems for gene delivery. In the past decade, non-phospholipid liposomes (Sterosomes) formulated with single-chain amphiphiles and high content of sterols have been developed. In particular, Sterosomes composed of stearylamine (SA) and cholesterol (Chol) display distinct properties compared with traditional phospholipid liposomes, including increased positive surface charges and enhanced particle stability. Herein, we report SA/Chol Sterosome and small interfering RNA (siRNA) complexes that significantly enhanced cellular uptake and gene knockdown efficiencies in adipose derived mesenchymal stem cells with minimal cytotoxicity compared with commercially available lipofectamine 2000. Furthermore, we confirmed osteogenic efficacy of these Sterosomes loaded with noggin siRNA in in vitro two- and three-dimensional settings as well as in a mouse calvarial defect model. The delivery of siRNA via novel SA/Chol Sterosomes presents a powerful method for efficient gene knockdown. These distinct nanoparticles may present a promising alternative approach for gene delivery.

Spontaneous vesicle phase formation by pseudogemini surfactants in aqueous solutions

The phase behavior of a kind of pseudogemini surfactant in aqueous solutions, formed by the mixture of sodium dodecyl benzene sulfonate (SDBS) and butane-1,4-bis (methylimidazolium bromide) ([mim-C4-mim]Br2) or butane-1,4-bis(methylpyrrolidinium bromide) ([mpy-C4-mpy]Br2) in a molar ratio of 2 : 1, is reported in the present work. When [mim-C4-mim]Br2 or [mpy-C4-mpy]Br2 is mixed with SDBS in aqueous solutions, one cationic [mim-C4-mim]Br2 or [mpy-C4-mpy]Br2 molecule "bridges" two SDBS molecules by noncovalent interactions (e.g. electrostatic, π-π stacking, and σ-π interactions), behaving like a pseudogemini surfactant. Vesicles can be formed by this kind of pseudogemini surfactant, determined by freeze-fracture transmission electron microscopy (FF-TEM) or cryogenic-transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS). The mixed system of sodium dodecyl sulfate (SDS) with [mim-C4-mim]Br2 or [mpy-C4-mpy]Br2 was also constructed, and only micelles were observed. We infer that a pseudogemini surfactant is formed under the synergic effect of electrostatic, π-π stacking, and σ-π interactions in the SDBS/[mim-C4-mim]Br2/H2O system, while electrostatic attraction and hydrophobic interactions may provide the directional force for vesicle formation in the SDBS/[mpy-C4-mpy]Br2/H2O system.

Microfluidic fabrication of cell-derived nanovesicles as endogenous RNA carriers

Exosomes/microvesicles are known to shuttle biological signals between cells, possibly by transferring biological signal components such as encapsulated RNAs and proteins, plasma membrane proteins, or both. Therefore exosomes are being considered for use as RNA and protein delivery vehicles for various therapeutic applications. However, living cells in nature secrete only a small number of exosomes, and procedures to collect them are complex; these complications impede their use in mass delivery of components to targeted cells. We propose a novel and efficient method that forces cells through hydrophilic microchannels to generate artificial nanovesicles. These mimetic nanovesicles contain mRNAs, intracellular proteins and plasma membrane proteins, and are shaped like cell-secreted exosomes. When recipient cells are exposed to nanovesicles from embryonic stem cells, mRNAs of Oct 3/4 and Nanog are transferred from embryonic stem cells to the target cells. This result suggests that mimetic nanovesicles can be used as vehicles to deliver RNA. This nanovesicle formation method is expected to be used in exosome research and to have applications in drug and RNA-delivery systems.

Silica-based mesoporous nanoparticles for controlled drug delivery

Drug molecules with lack of specificity and solubility lead patients to take high doses of the drug to achieve sufficient therapeutic effects. This is a leading cause of adverse drug reactions, particularly for drugs with narrow therapeutic window or cytotoxic chemotherapeutics. To address these problems, there are various functional biocompatible drug carriers available in the market, which can deliver therapeutic agents to the target site in a controlled manner. Among the carriers developed thus far, mesoporous materials emerged as a promising candidate that can deliver a variety of drug molecules in a controllable and sustainable manner. In particular, mesoporous silica nanoparticles are widely used as a delivery reagent because silica possesses favourable chemical properties, thermal stability and biocompatibility. Currently, sol-gel-derived mesoporous silica nanoparticles in soft conditions are of main interest due to simplicity in production and modification and the capacity to maintain function of bioactive agents. The unique mesoporous structure of silica facilitates effective loading of drugs and their subsequent controlled release. The properties of mesopores, including pore size and porosity as well as the surface properties, can be altered depending on additives used to fabricate mesoporous silica nanoparticles. Active surface enables functionalisation to modify surface properties and link therapeutic molecules. The tuneable mesopore structure and modifiable surface of mesoporous silica nanoparticle allow incorporation of various classes of drug molecules and controlled delivery to the target sites. This review aims to present the state of knowledge of currently available drug delivery system and identify properties of an ideal drug carrier for specific application, focusing on mesoporous silica nanoparticles.

Formation of pH-sensitive cationic liposomes from a binary mixture of monoalkylated primary amine and cholesterol

It has been shown that mixtures of monoalkylated amphiphiles and sterols can form liquid-ordered (lo) lamellar phases. These bilayers can be extruded using conventional methods to obtain large unilamellar vesicles (LUVs) that have very low permeability and a specific response to a given stimulus. For example, pH variations can trigger the release from LUVs formed with palmitic acid and sterols. In the present work, the possibility to form non phospholipid liposomes with mixtures of stearylamine (SA) and cholesterol (Chol) was investigated. The phase behavior of these mixtures was characterized by differential scanning calorimetry, infrared, and (2)H NMR spectroscopy. It is found that this particular mixture can form a lo lamellar phase that is pH-sensitive as the system undergoes a transition from a lo phase to a solid state when pH is increased from 5.5 to 12. LUVs have been successfully extruded from equimolar SA/Chol mixtures. Release experiments as a function of time revealed the relatively low permeability of these systems. The fact that the stability of these liposomes is pH dependent implies that these LUVs display an interesting potential as new cationic carriers for pH-triggered release. This is the first report of non phospholipid liposomes with high sterol content combining an overall positive charge and pH-sensitivity.

Confocal Raman microscopy of pH-gradient-based 10 000-fold preconcentration of compounds within individual, optically trapped phospholipid vesicles

A stable pH gradient established across the membrane of phospholipid vesicle can induce the accumulation of ionizable compounds from bulk solution into the vesicle interior. This pH-gradient vesicle loading process has previously been utilized to encapsulate drugs in pharmaceutical liposomal formulations. In the present work, this process is exploited to preconcentrate dilute analytes from free solution into phospholipid vesicles, which are then detected by optically trapping individual vesicles and measuring their contents using confocal Raman microscopy. The theory of accumulation, based on the acid-base ionization equilibria of the analyte, is developed to account for depletion of the source phase and the finite buffering capacity of the vesicle interior. The model predicts that, under appropriate conditions, enrichment factors of more than 4 orders of magnitude can be realized. To test the concept, experiments were performed measuring the accumulation of benzyldimethylamine into 600-nm phospholipid vesicles. Manipulation of vesicles by optical trapping allows accumulation within an individual vesicle to be characterized while varying the external solution conditions. A more than 10 000-fold enrichment of the analyte concentration inside the vesicle relative to the source phase is reported. The results suggest that pH-gradient loading could be exploited as a powerful preconcentration scheme for trace analysis using either Raman microscopy or other microspectroscopy techniques.

Study of the release of a microencapsulated acid dye in polyamide dyeing using mixed cationic liposomes

The main objective of this work was to increase the retarding effect of the acid dye Telon(®) Blue RR (C.I. Acid Blue 62; DyStar, Frankfurt, Germany) release on polyamide fibres dyeing by encapsulation of the dye in liposomes as an alternative to synthetic auxiliaries, in order to reduce effluent pollution. The retarding effect achieved with the use of mixed cationic liposomes of dioctadecyldimethylammonium bromide (DODAB)/soybean lecithin (containing a 10% molar fraction of DODAB) was better in comparison with either pure soybean lecithin liposomes or synthetic auxiliaries. The retarding effect of liposomes on the dye release was analysed through changes in the absorption and fluorescence spectra of the acid dye at different conditions. The effect of temperature (in the range of 25 °C - 70 °C) on the spectroscopic behaviour of the dye in the absence and in presence of polyamide was also studied, in order to simulate the dyeing conditions. Exhaustion curves obtained in dyeing experiments showed that, below 45 °C, the retarding effect of the mixed liposomes (lecithin/DODAB (9:1)) was similar to that of the auxiliaries, but better than the one of pure lecithin liposomes. At higher temperatures (above 45 °C), the system lecithin/DODAB presents a better performance, achieving a higher final exhaustion level when compared with the commercial leveling agent without losing the smoothing effect of lecithin.

Stability and antimicrobial effect of amikacin-loaded solid lipid nanoparticles

Solid lipid nanoparticles (SLNs) of amikacin were designed in this study for pulmonary delivery to reduce the dose or its administration intervals leading to reduction of its toxicities especially in long term treatment. Nanoparticles of amikacin were prepared from cholesterol by solvent diffusion technique and homogenization. The size, zeta potential, loading efficiency, and release profile of the nanoparticles were studied. The conventional broth macrodilution tube method was used to determine the minimum inhibitory concentration (MIC) and minimum bacteriostatic concentration (MBC) of amikacin SLNs with respect to Pseudomonas aeruginosa in vitro. To guarantee the stability of desired SLNs, they were lyophilized using cryoprotectants. Results showed that considering the release profile of amikacin from the studied nanocarrier, MIC and MBC of amikacin could be about two times less in SLNs of amikacin compared to the free drug. Therefore, fewer doses of amikacin in SLNs can clear the infection with less adverse effects and more safety. Particle size enlargement after lyophilization of desired SLNs after two months storage was limited in comparison with non-lyophilized particles, 996 and 194 nm, respectively. Zeta potential of lyophilized particles was increased to +17 mV from +4 mV before lyophilization. Storage of particles in higher temperature caused accelerated drug release.

A review on the application of inorganic nano-structured materials in the modification of textiles: focus on anti-microbial properties

Textiles can provide a suitable substrate to grow micro-organisms especially at appropriate humidity and temperature in contact to human body. Recently, increasing public concern about hygiene has been driving many investigations for anti-microbial modification of textiles. However, using many anti-microbial agents has been avoided because of their possible harmful or toxic effects. Application of inorganic nano-particles and their nano-composites would be a good alternative. This review paper has focused on the properties and applications of inorganic nano-structured materials with good anti-microbial activity potential for textile modification. The discussed nano-structured anti-microbial agents include TiO(2) nano-particles, metallic and non-metallic TiO(2) nano-composites, titania nanotubes (TNTs), silver nano-particles, silver-based nano-structured materials, gold nano-particles, zinc oxide nano-particles and nano-rods, copper nano-particles, carbon nanotubes (CNTs), nano-clay and its modified forms, gallium, liposomes loaded nano-particles, metallic and inorganic dendrimers nano-composite, nano-capsules and cyclodextrins containing nano-particles. This review is also concerned with the application methods for the modification of textiles using nano-structured materials.

Synthesis of Ag-liposome nano composites

Silver nanoparticles were synthesized and stabilized by a simple, environment-friendly method in a liposomes structure. Liposomes were prepared by facing lecithin to the aqueous-phase solutions while stirring vigorously. The ratio of lecithin concentration to silver nitrate (K(Lec/Ag) = [Lecithin]/[AgNO(3)]) is the influencing factor in the synthesis of silver nanoparticles. The stability, size distribution, and antibacterial properties of synthesized silver nanoparticles were studied by ultraviolet (UV)-visible, dynamic light scattering, and antibacterial assay. The UV spectra indicated a single symmetric extinction peak at 400 nm, confirming the spherical shape of the synthesized silver nanoparticles. A high K(Lec/Ag) value leads to a reduction in the intensity of extinction spectra and increases the size of Ag-liposomes nanocomposites. The large Ag-liposomes nanocomposites are transformed to the smaller Ag-liposomes nanocomposites (from 342 to 190 nm) due to sonication treatment. The stabilized silver nanoparticles with various lecithin concentrations showed a good antibacterial activity against Staphylococcus aureus, a Gram-positive bacterium, and Escherichia coli, a Gram-negative bacterium.