Tetronic-grafted chitosan hydrogel as an injectable and biocompatible scaffold for biomedical applications

Chitosan Schiff bases-based polyelectrolyte complexes with graphene quantum dots and their prospective biomedical applications

Chitosan (Cs) bis-aldehyde Schiff base derivatives were synthesized by condensation of Cs with three bis-aldehydes namely; butane-1,4-diyl bis(4-formylbenzoate), N,N'-(butane-1,4-diyl)bis(2-(4-formylphenoxy)acetamide) and 4,4'-(butane-1,4-diylbis(oxy))dibenzaldehyde. The prepared Cs derivatives were blended with carboxymethyl chitosan(CMC) and graphene quantum dots (GQDs) to produce semi-IPNs polyelectrolyte complexes (PECs). and characterized with respect to their molecular structure and physio-chemical properties. The antibacterial activity against H. pylori (and in vitro Inosine 5'-monophosphate dehydrogenase IMPDH inhibitory assay) was evaluated. Additionally, a preliminary in vitro assessment for wound healing was performed against PECs in which wound closure percentages, and rates were investigated indicating an accelerated wound healing compared with untreated cells. The PEC based on Schiff base PEC containing amide linkage showed the highest wound healing ability. A minimal inhibitory concentration (MIC) was obtained for the PEC sample containing Cs Schiff base derived from 4,4'-(butane-1, 4-diylbis(oxy))dibenzaldehyde at a dose of 0.98 μg/ml inhibiting H. pylori growth by 100%. Additionally, the selected above-mentioned compound was selected to test its inhibitory activity against the HpIMPDH enzyme in addition to its selectivity towards the hIMPDH2 enzyme and was found to have promising activity against the HpIMPDH enzyme with IC₅₀ value of 0.65 μM, and to be safer and less active against the hIMPDH2 enzyme with IC₅₀ > 10 μM, reflecting its selectivity.

Cytocompatible dendrimer G3.0-hematin nanoparticle with high stability and solubility for mimicking horseradish peroxidase activity in in-situ forming hydrogel

Hematin has been used as an alternative enzyme catalyst to horseradish peroxidase (HRP) due to its iron-containing activity center. Although hematin and it derivatives have been widely used for polymerization of phenol/analine compounds, it has some drawbacks such as the limited solubility and reaction only at high pH condition. Herein, we report a nanosized biomimetic catalyst, hematin-decorated polyamidoamine dendrimer (G3.0-He) that can effectively catalyze the in situ hydrogelation of phenol-conjugated polymers under neutral pH condition. We demonstrate that G3.0-He particles are smaller than 100 nm and have excellent enzyme-mimetic functions. Interestingly, the nanosized catalyst is not inactivated at high H₂O₂ concentration. Compared to pure hematin, G3.0-He has significantly higher dispersion in acidic and neutral media, and preserves the percentage of survival of fibroblasts over 90%. Notably, G3.0-He possesses an exquisite HRP-mimicking activity in gelation of gelatin derivative with phenolic hydroxyl (tyamine) moieties under mild physiological conditions. The in vitro study demonstrated that Gel-Tyr hydrogel by G3.0-He catalyzed reaction had excellent cytocompatibility and an excellent scaffold for adhesion to fibroblast cells. Therefore, the designed minimalistic G3.0-He catalyst could serve as an effective catalytic alternative for HRP enzyme in the preparation of biomedical hydrogels.

Injectable Nanocomposite Hydrogels and Electrosprayed Nano(Micro)Particles for Biomedical Applications

Polymeric scaffolds have played important roles in biomedical applications due to their potentially practical performance such as delivery of bioactive components and/or regenerative cells. These materials were well-designed to encapsulate bioactive molecules or/and nanoparticles for enhancing their performance in tissue regeneration and drug delivery systems. In the study, several multifunctional nanocomposite hydrogel and polymeric nano(micro)particles-electrosprayed platforms were described from their fabrication methods and structural characterizations to potential applications in the mentioned fields. Regarding to their described performance, these multifunctional nanocomposite biomaterials could pay many ways for further studies that enables them apply in clinical applications.

A dual synergistic of curcumin and gelatin on thermal-responsive hydrogel based on Chitosan-P123 in wound healing application

This study aimed to fabricate the potential therapeutic scaffold to efficiently and safely fastening skin wound healing. A biocompatible grafting polymer-based thermal sensitive hybrid hydrogel (Chitosan-P123, CP) containing gelatin and curcumin was designed to be suitable stiffness for tissue regeneration. A detailed in the rheological study found that the encapsulated agents induced the change in the stiffness of the hydrogel from the hard to the soft. Especial, the thermally induced phase transition of CP hydrogel was governed by the participant of gelatin rather than curcumin. For example, at 25 wt% gelatin, CP hydrogel exhibited a unique gel-sol-gel transition following the function of temperature. Moreover, in vitro investigation revealed that the hybrid hydrogel provides the capacity of especially induced curcumin release with a sustainable rate as well as the excellent biocompatibility scaffold. Altogether with in vivo study, the hybrid hydrogel highlighted the advance of the dual synergistic of curcumin and gelatin in development of smart scaffold system, which promoted the efficacy in the regeneration of the structure and the barrier's function of damaged skin such as wound or skin cancer.

Investigation of Chitosan Nanoparticles Loaded with Protocatechuic Acid (PCA) for the Resistance of Pyricularia oryzae Fungus against Rice Blast

In this study, chitosan nanoparticles were used as a carrier for Protocatechuic acid (PCA) to resist Pyricularia oryzae against rice blast. The final compound was characterized using zeta potentials for its surface electricity, Fourier transform infrared (FT-IR) analysis and transmission electron microscopy (TEM) were conducted for functional groups and for particle sizes and shape, respectively. The zeta potential results showed that loading PCA causes chitosan nanoparticle (CSNP) to decrease in surface electrons. The TEM images revealed that the particle size of chitosan (CS), although increasing in size when carrying PCA molecules, showed sufficient size for reasonable penetration into fungal cells. The FT-IR analysis showed that all functional group in CSNP carried PCA matched with previous studies. The antifungal test showed that diameters of inhibition zone of CS increases significantly after loading PCA, exhibiting the strongest antimicrobial effect on the Pyricularia oryzae fungus compared with weaker effects exhibited by CSNP alone or PCA. Our results suggested that CSNP loaded with PCA could be a potential compound for eradication of Pyricularia oryzae and that further testing on in vitro rice plants is recommended to reaffirm this possibility.

Synergic Activity Against MCF-7 Breast Cancer Cell Growth of Nanocurcumin-Encapsulated and Cisplatin-Complexed Nanogels

Nanogel-based systems loaded with single anticancer drugs display miscellaneous effectiveness in tumor remission, gradually circumventing mutation and resistance in chemotherapy. Hence, the existence of dual-drug delivered nano-sized systems has been contemporaneous with drug development and preceded the conventional-dose chemotherapy. Among outstanding synergistic drug nanoplatforms, thermosensitive copolymer heparin-Pluronic F127 (Hep-F127) co-delivering cisplatin (CDDP) and curcumins (Cur) (Hep-F127/CDDP/Cur) has emerged as a notable candidate for temperature-responsive drug delivery. The procedure was based on the entrapment of curcumin into the hydrophobic core of bio-degradable co-polymer Hep-F127 while the hydrophilic drug CDDP subsequently conjugated to the backbone heparin to form the core-shell structure. The copolymer was characterized by Fourier transform infrared (FT-IR) spectrophotometry, Transmission Electron Microscopy (TEM), and Dynamic Light Scattering (DLS), to corroborate the successful synthesis and via HPLC along with AES-ICP to evaluate the high drug loading along with a controllable release from the nano-gels. A well-defined nano-shell with size in the 129.3 ± 3.8 nm size range could enhance higher the efficacy of the conjugated-CDDP to Hep-F127 than that of single doses. Moreover, the considerable amount of dual-drug released from thermosensitive nanogels between different conditions (pH = 7.4 and pH = 5.5) in comparison to CDDP from Hep-F127 partially indicated the significantly anti-proliferative ability of Hep-F127/CDDP/Cur to the MCF-7 cell line. Remarkably, drug testing in a xenograft model elucidates the intricate synergism of co-delivery in suppressing tumor growth, which remedies some of the problems affecting in cancer chemotherapy.

Injectable Nanocurcumin-Formulated Chitosan-g-Pluronic Hydrogel Exhibiting a Great Potential for Burn Treatment

Burn wound healing is a complex multifactorial process that relies on coordinated signaling molecules to succeed. Curcumin is believed to be a potent antioxidant and anti-inflammatory agent; therefore, it can prevent the prolonged presence of oxygen free radicals which is a significant factor causing inhabitation of optimum healing process. This study describes an extension of study about the biofunctional nanocomposite hydrogel platform that was prepared by using curcumin and an amphiphilic chitosan-g-pluronic copolymer specialized in burn wound healing application. This formular (nCur-CP, nanocomposite hydrogel) was a free-flowing sol at ambient temperature and instantly converted into a nonflowing gel at body temperature. In addition, the storage study determined the great stability level of nCur-CP in long time using UV-Vis and DLS. Morphology and distribution of nCur in its nanocomposite hydrogels were observed by SEM and TEM, respectively. In vitro studies suggested that nCur-CP exhibited well fibroblast proliferation and ability in antimicrobacteria. Furthermore, second- and third-degree burn wound models were employed to evaluate the in vivo wound healing activity of the nCur-CP. In the second-degree wound model, the nanocomposite hydrogel group showed a higher regenerated collagen density and thicker epidermis layer formation. In third degree, the nCur-CP group also exhibited enhancement of wound closure. Besides, in both models, the nanocomposite material-treated groups showed higher collagen content, better granulation, and higher wound maturity. Histopathologic examination also implied that the nanocomposite hydrogel based on nanocurcumin and chitosan could enhance burn wound repair. In conclusion, the biocompatible and injectable nanocomposite scaffold might have great potential to apply for wound healing.

Silk Fibroin/Polyvinyl Pyrrolidone Interpenetrating Polymer Network Hydrogels

Silk fibroin hydrogel is an ideal model as biomaterial matrix due to its excellent biocompatibility and used in the field of medical polymer materials. Nevertheless, native fibroin hydrogels show poor transparency and resilience. To settle these drawbacks, an interpenetrating network (IPN) of hydrogels are synthesized with changing ratios of silk fibroin/N-Vinyl-2-pyrrolidonemixtures that crosslink by H₂O₂ and horseradish peroxidase. Interpenetrating polymer network structure can shorten the gel time and the pure fibroin solution gel time for more than a week. This is mainly due to conformation from the random coil to the β-sheet structure changes of fibroin. Moreover, the light transmittance of IPN hydrogel can be as high as more than 97% and maintain a level of 90% within a week. The hydrogel, which mainly consists of random coil, the apertures inside can be up to 200 μm. Elastic modulus increases during the process of gelation. The gel has nearly 95% resilience under the compression of 70% eventually, which is much higher than native fibroin gel. The results suggest that the present IPN hydrogels have excellent mechanical properties and excellent transparency.

Redox and pH Responsive Poly (Amidoamine) Dendrimer-Heparin Conjugates via Disulfide Linkages for Letrozole Delivery

Heparin (Hep) conjugated to poly (amidoamine) dendrimer G3.5 (P) via redox-sensitive disulfide bond (P-SS-Hep) was studied. The redox and pH dual-responsive nanocarriers were prepared by a simple method that minimized many complex steps as previous studies. The functional characterization of G3.5 coated Hep was investigated by the proton nuclear magnetic resonance spectroscopy. The size and formation were characterized by the dynamic light scattering, zeta potential, and transmission electron microscopy. P-SS-Hep was spherical in shape with average diameter about 11 nm loaded with more than 20% letrozole. This drug carrier could not only eliminate toxicity to cells and improve the drugs solubility but also increase biocompatibility of the system under reductive environment of glutathione. In particular, P-SS-Hep could enhance the effectiveness of cancer therapy after removing Hep from the surface. These results demonstrated that the P-SS-Hep conjugates could be a promising candidate as redox and pH responsive nanocarriers for cancer chemotherapy.

Novel low temperature (<37 °C) chitosan hydrogel fabrication under the synergistic effect of graphene oxide

A low temperature chitosan hydrogel was fabricated under the synergistic effect of graphene oxide, and may be applied in hydrogel medical coatings.

Thermo-Responsive Polyurethane Hydrogels Based on Poly(ε-caprolactone) Diol and Amphiphilic Polylactide-Poly(Ethylene Glycol) Block Copolymers

Waterborne polyurethane (PU) based on poly(ε-caprolactone) (PCL) diol and an amphiphilic polylactide-poly(ethylene glycol) (PLA-PEG) diblock copolymer was synthesized. The molar ratio of PCL/PLA-PEG was 9:1 with different PLA chain lengths. The PU nanoparticles were characterized by dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and rheological analysis. The water contact angle measurement, infrared spectroscopy, wide angle X-ray scattering (WAXS), thermal and mechanical analyses were conducted on PU films. Significant changes in physio-chemical properties were observed for PUs containing 10 mol % of amphiphilic blocks. The water contact angle was reduced to 12°⁻13°, and the degree of crystallinity was 5%⁻10%. The PU dispersions underwent sol-gel transition upon the temperature rise to 37 °C. The gelation time increased as the PLA chain length increased. In addition, the fractal dimension of each gel was close to that of a percolation cluster. Moreover, PU4 with a solid content of 26% could support the proliferation of human mesenchymal stem cells (hMSCs). Therefore, thermo-responsive hydrogels with tunable properties are promising injectable materials for cell or drug delivery.

Highly lipophilic pluronics-conjugated polyamidoamine dendrimer nanocarriers as potential delivery system for hydrophobic drugs

In the study, four kinds of pluronics (P123, F68, F127 and F108) with varying hydrophilic-lipophilic balance (HLB) values were modified and conjugated on 4th generation of polyamidoamine dendrimer (PAMAM). The obtained results from FT-IR, ¹H NMR and GPC showed that the pluronics effectively conjugated on the dendrimer. The molecular weight of four PAMAM G4.0-Pluronics and its morphologies are in range of 200.15-377.14kDa and around 60-180nm in diameter by TEM, respectively. Loading efficiency and release of hydrophobic fluorouracil (5-FU) anticancer drug were evaluated by HPLC; Interesting that the dendrimer nanocarrier was conjugated with the highly lipophilic pluronic P123 (G4.0-P123) exhibiting a higher drug loading efficiency (up to 76.25%) in comparison with another pluronics. Live/dead fibroblast cell staining assay mentioned that all conjugated nanocarriers are highly biocompatible. The drug-loaded nanocarriers also indicated a highly anti-proliferative activity against MCF-7 breast cancer cell. The obtained results demonstrated a great potential of the highly lipophilic pluronics-conjugated nanocarriers in hydrophobic drugs delivery for biomedical applications.

Oxidized high-density lipoprotein accelerates atherosclerosis progression by inducing the imbalance between treg and teff in LDLR knockout mice

High density lipoprotein (HDL) dysfunction has been widely reported in clinic, and oxidation of HDL (ox-HDL) was shown to be one of the most common modifications in vivo and participate in the progression of atherosclerosis. But the behind mechanisms are still elusive. In this study, we firstly analyzed and found strong relationship between serum ox-HDL levels and risk factors of coronary artery diseases in clinic, then the effects of ox-HDL in initiation and progression of atherosclerosis in LDLR knockout mice were investigated by infusion of ox-HDL dissolved in chitosan hydrogel before the formation of lesions in vivo. Several new evidence were shown: (i) the serum levels of ox-HDL peaked early before the formation of lesions in LDLR mice fed with high fat diet similar to oxidative low density lipoprotein, (ii) the formation of atherosclerotic lesions could be accelerated by infusion of ox-HDL, (iii) the pro-atherosclerotic effects of ox-HDL were accompanied by imbalanced levels of effector and regulatory T cells and relative gene expressions, which implied that imbalance of teff and treg might contribute to the pro-atherosclerosis effects of ox-HDL.

Enzyme-mediated fabrication of an oxidized chitosan hydrogel as a tissue sealant

Oxidized polysaccharide-based hydrogels have recently attracted much attention for tissue regeneration because of their biocompatibility and tissue-adhesive property. In this study, we introduce a new type of chitosan-based hydrogel as a tissue sealant, which was prepared by enzymatic mediation from periodate-oxidized chitosan–polyethylene glycol–tyramine. The oxidized chitosan backbone was expected to enhance the interconnection between the hydrogel layer and collagen in the tissues via the Schiff-base reaction. Proton nuclear magnetic resonance spectra indicated that tyramine-functionalized polyethylene glycol-nitrophenyl carbonate ester was conjugated to the oxidized chitosan. The degree of oxidation of the chitosan backbone was around 14% of the glucosamine units by proton nuclear magnetic resonance. The hydrogel was rapidly formed in situ (within a few seconds) in the presence of horseradish peroxidase and hydrogen peroxide. In vitro experiments with live/dead cell assays showed that the oxidized chitosan-based hydrogel was cytobiocompatible. The hydrogel exhibited high tissue adhesion strength on porcine skin models as well as good tissue-adhesive ability and wound healing properties on rabbit skin. These positive results could be promising for the application of oxidized chitosan-based hydrogels as a wound sealant.