Biotechnological tools to improve bioremediation of phenol by Acinetobacter sp. RTE1.4

Phenol Degradation by Pseudarthrobacter phenanthrenivorans Sphe3

Phenol poses a threat as one of the most important industrial environmental pollutants that must be removed before disposal. Biodegradation is a cost-effective and environmentally friendly approach for phenol removal. This work aimed at studying phenol degradation by Pseudarthrobacter phenanthrenivorans Sphe3 cells and also, investigating the pathway used by the bacterium for phenol catabolism. Moreover, alginate-immobilized Sphe3 cells were studied in terms of phenol degradation efficiency compared to free cells. Sphe3 was found to be capable of growing in the presence of phenol as the sole source of carbon and energy, at concentrations up to 1500 mg/L. According to qPCR findings, both pathways of ortho- and meta-cleavage of catechol are active, however, enzymatic assays and intermediate products identification support the predominance of the ortho-metabolic pathway for phenol degradation. Alginate-entrapped Sphe3 cells completely degraded 1000 mg/L phenol after 192 h, even though phenol catabolism proceeds slower in the first 24 h compared to free cells. Immobilized Sphe3 cells retain phenol-degrading capacity even after 30 days of storage and also can be reused for at least five cycles retaining more than 75% of the original phenol-catabolizing capacity.

Development of stable agar/carrageenan-Fe3O4-Klebsiella pneumoniae composite beads for efficient phenol degradation

It's of practical importance but highly challenging for cell immobilization supports to maintain mechanical strength and reduce microbial leakage in environmental and industrial applications. Herein, we developed an agar/κ-carrageenan composite hydrogel to entrap Klebsiella pneumoniae with the combination of nano-Fe₃O₄ for processing phenol wastes. The agar/carrageenan-K. pneumoniae composite bead showed good pelletizing properties, superior material strength and high cell loading. Introduction of nano-Fe₃O₄ to the composite gel further enhanced phenol degradation rate by >10% owing to strengthened phenol oxidation by Fe₃O₄-induced hydroxyl radicals (·OH) and improved mass and electron transfers. 50 successive cycles of degradation and recycling using the agar/carrageenan-K. pneumoniae composite bead showed that 1500 mg/L phenol was fully degraded for all cycles with the highest rate of 55.12 mg L^-1·h^-1 obtained at the 15th cycles. The improved stability and recyclability render the as-prepared immobilized phenol-degrading bacteria with great potential for industrial applications.

Immobilized enzymes and cell systems: an approach to the removal of phenol and the challenges to incorporate nanoparticle-based technology

The presence of phenol in wastewater poses a risk to ecosystems and human health. The traditional processes to remove phenol from wastewater, although effective, have several drawbacks. The best alternative is the application of ecological biotechnology tools since they involve biological systems (enzymes and microorganisms) with moderate economic and environmental impact. However, these systems have a high sensitivity to environmental factors and high substrate concentrations that reduce their effectiveness in phenol removal. This can be overcome by immobilization-based technology to increase the performance of enzymes and bacteria. A key component to ensure successful immobilization is the material (polymeric matrices) used as support for the biological system. In addition, by incorporating magnetic nanoparticles into conventional immobilized systems, a low-cost process is achieved but, most importantly, the magnetically immobilized system can be recovered, recycled, and reused. In this review, we study the existing alternatives for treating wastewater with phenol, from physical and chemical to biological techniques. The latter focus on the immobilization of enzymes and microorganisms. The characteristics of the support materials that ensure the viability of the immobilization are compared. In addition, the challenges and opportunities that arise from incorporating magnetic nanoparticles in immobilized systems are addressed.

Phenol Removal Capacity of the Common Duckweed (Lemna minor L.) and Six Phenol-Resistant Bacterial Strains From Its Rhizosphere: In Vitro Evaluation at High Phenol Concentrations

The main topic of this study is the bioremediation potential of the common duckweed, Lemna minor L., and selected rhizospheric bacterial strains in removing phenol from aqueous environments at extremely high initial phenol concentrations. To that end, fluorescence microscopy, MIC tests, biofilm formation, the phenol removal test (4-AAP method), the Salkowski essay, and studies of multiplication rates of sterile and inoculated duckweed in MS medium with phenol (200, 500, 750, and 1000 mg L⁻¹) were conducted. Out of seven bacterial strains, six were identified as epiphytes or endophytes that efficiently removed phenol. The phenol removal experiment showed that the bacteria/duckweed system was more efficient during the first 24 h compared to the sterile duckweed control group. At the end of this experiment, almost 90% of the initial phenol concentration was removed by both groups, respectively. The bacteria stimulated the duckweed multiplication even at a high bacterial population density (>10⁵ CFU mL⁻¹) over a prolonged period of time (14 days). All bacterial strains were sensitive to all the applied antibiotics and formed biofilms in vitro. The dual bacteria/duckweed system, especially the one containing strain 43-Hafnia paralvei C32-106/3, Accession No. MF526939, had a number of characteristics that are advantageous in bioremediation, such as high phenol removal efficiency, biofilm formation, safety (antibiotic sensitivity), and stimulation of duckweed multiplication.

Functional Analysis of a Polluted River Microbiome Reveals a Metabolic Potential for Bioremediation

The objective of this study is to understand the functional and metabolic potential of the microbial communities along the Apatlaco River and highlight activities related to bioremediation and its relationship with the Apatlaco’s pollutants, to enhance future design of more accurate bioremediation processes. Water samples were collected at four sampling sites along the Apatlaco River (S1–S4) and a whole metagenome shotgun sequencing was performed to survey and understand the microbial metabolic functions with potential for bioremediation. A HMMER search was used to detect sequence homologs related to polyethylene terephthalate (PET) and polystyrene biodegradation, along with bacterial metal tolerance in Apatlaco River metagenomes. Our results suggest that pollution is a selective pressure which enriches microorganisms at polluted sites, displaying metabolic capacities to tolerate and transform the contamination. According to KEGG annotation, all sites along the river have bacteria with genes related to xenobiotic biodegradation. In particular, functions such as environmental processing, xenobiotic biodegradation and glycan biosynthesis are over-represented in polluted samples, in comparison to those in the clean water site. This suggests a functional specialization in the communities that inhabit each perturbated point. Our results can contribute to the determination of the partition in a metabolic niche among different Apatlaco River prokaryotic communities, that help to contend with and understand the effect of anthropogenic contamination.

Integrative study of microbial community dynamics and water quality along The Apatlaco River

The increasing demand for clean water resources for human consumption, is raising concerning about the sustainable worldwide provisioning. In Mexico, rivers near to high-density urbanizations are subject to irrational exploitation where polluted water is a risk for human health. Therefore, the aims of this study are to analyze water quality parameters and bacterial community dynamics to understand the relation between them, in the Apatlaco river, which presents a clear environmental perturbance. Parameters such as total coliforms, chemical oxygen demand, harness, ammonium, nitrite, nitrate, total Kjeldahl nitrogen, dissolved oxygen, total phosphorus, total dissolved solids, and temperature were analyzed in 17 sampling points along the river. The high pollution level was registered in the sampling point 10 with 480 mg/L chemical oxygen demand, 7 mg/L nitrite, 34 mg/L nitrate, 2 mg/L dissolved oxygen, and 299 mg/L of total dissolved solids. From these sites, we selected four samples for DNA extraction and performed a metagenomic analysis using a whole metagenome shotgun approach, to compare the microbial communities between polluted and non-polluted sites. In general, Proteobacteria was the most representative phylum in all sites. However, the clean water reference point was enriched with microorganism from the Limnohabitans genus, a planktonic bacterium widespread in freshwater ecosystems. Nevertheless, in the polluted sampled sites, we found a high abundance of potential opportunistic pathogen genera such as Acinetobacter, Arcobacter, and Myroides, among others. This suggests that in addition to water contamination, an imminent human health risk due to pathogenic bacteria can potentially affect a population of ∼1.6 million people dwelling nearby. These results will contribute to the knowledge regarding anthropogenic pollution on the microbial population dynamic and how they affect human health and life quality.

Biodegradation of phenol by Acinetobacter tandoii isolated from the gut of the termite

The diet of wood-feeding termites (WFT) consists of cellulose, hemicellulose, and lignin. Cellulose and hemicellulose are utilized by symbiotic protozoa as a carbon source. Protozoa produce acetate, which is the carbon source of the termite. Recently, the mechanisms by which lignin is modified by termites have been reported. Lignin is broken down into its phenylpropanoid monomers and phenolic compounds. Bacteria from WFT gut capable of degrading lignin metabolic products are potentially valuable for bioremediation and biofuel production. A bacterium was isolated from the gut of the WFT and identified as Acinetobacter tandoii. This bacterium was capable of utilizing phenol as the sole carbon source and was able to completely degrade phenol at the concentration of 280 mg/L. A. tandoii degraded phenol via the ortho and β-ketoadipase pathway. This bacterium is a known phenol degrader, but to our knowledge, this is the first time it was isolated and tested for phenol-degrading ability from termites.

Carbon ecology of termite gut and phenol degradation by a bacterium isolated from the gut of termite

Metagenomics and transcriptomics have had some success analyzing community and functional ecology of the termite gut, but carbon utilization ecology and the effect of diet on the gut community are not well understood. This study was done to determine the effect of three hardwood tree types, oak (Quercus spp.), red maple (Acer rubrum), and tupelo (Nyssa aquatica) on the termite species, Reticulitermes flavipes in the family Rhinotermitidae. Termite abdomen homogenates were incubated on agar plates containing three common carbon sources in the termite gut, namely, acetate, cellobiose, and phenol under aerobic and anaerobic conditions. Bacterial growth was higher on cellobiose than any other carbon source. Higher bacterial growth on cellobiose was observed from termite colonies feeding on oak than on phenol from the other two wood types. The difference between aerobic and anaerobic conditions was not significant. A bacterium, Acinetobacter tandoii isolated and identified from our previous study was subjected to high concentrations of phenol as the sole carbon source and this bacterium was able to degrade phenol concentration up to 600 mg/L.

The unusual glycine-rich C terminus of the Acinetobacter baumannii RNA chaperone Hfq plays an important role in bacterial physiology

Acinetobacter baumannii is a Gram-negative nosocomial pathogen that causes soft tissue infections in patients who spend a long time in intensive care units. This recalcitrant bacterium is very well known for developing rapid drug resistance, which is a combined outcome of its natural competence and mobile genetic elements. Successful efforts to treat these infections would be aided by additional information on the physiology of A. baumannii Toward that end, we recently reported on a small RNA (sRNA), AbsR25, in this bacterium that regulates the genes of several efflux pumps. Because sRNAs often require the RNA chaperone Hfq for assistance in binding to their cognate mRNA targets, we identified and characterized this protein in A. baumannii The homolog in A. baumannii is a large protein with an extended C terminus unlike Hfqs in other Gram-negative pathogens. The extension has a compositional bias toward glycine and, to a lower extent, phenylalanine and glutamine, suggestive of an intrinsically disordered region. We studied the importance of this glycine-rich tail using truncated versions of Hfq in biophysical assays and complementation of an hfq deletion mutant, finding that the tail was necessary for high-affinity RNA binding. Further tests implicate Hfq in important cellular processes of A. baumannii like metabolism, drug resistance, stress tolerance, and virulence. Our findings underline the importance of the glycine-rich C terminus in RNA binding, ribo-regulation, and auto-regulation of Hfq, demonstrating this hitherto overlooked protein motif to be an indispensable part of the A. baumannii Hfq.

Microwave-activated carbons from tucumã (Astrocaryum aculeatum) seed for efficient removal of 2-nitrophenol from aqueous solutions

Activated carbons (ACs) prepared from tucumã seed (Astrocaryum aculeatum) were used for 2-nitrophenol removal from aqueous solutions. The ACs were characterized by elemental analysis, FTIR, N₂ adsorption/desorption isotherms, TGA, hydrophobicity/hydrophilicity balance, and total of acidic and basic groups. The ACs showed to have hydrophilic surfaces and they presented high specific surface areas (up to 1318 m² g^-1). In batch optimization studies, maximum removal was obtained at pH 7, contact time of 30 min, adsorbent dosage 1.5 gL^-1 and temperature of 50°C. The general-order kinetic model and Liu isotherm model best fit the kinetic and equilibrium adsorption data with a maximum adsorption capacity of 1382 mg g^-1 at 50°C. Effect of temperature and thermodynamic studies revealed that the adsorption processes of 2-nitrophenol onto ACs are dependent on temperature and are exothermic and spontaneous, respectively. About the applicability of the ACs for treating simulated effluents, the tucumã seed-activated carbon showed an excellent outcome in the treatment of simulated effluents, evidencing its high efficiency for phenolic compound adsorption. Tucumã seed-ACs showed to be cost effective and highly efficient adsorbents for efficient removal of 2-nitrophenol from aqueous solutions.

Effective biosorption of phenol by the thermophilic cyanobacterium Phormidium sp

The use of microbial biomass as biosorbent for phenol removal has been extensively studied, but its removal by biosorption by thermophilic cyanobacterium Phormidium sp. has not been investigated to the best of our knowledge. In the present study, some important parameters for biosorption process were optimized, starting with testing the effects of different pH values ranging from 1 to 12, and then initial phenol concentrations of 45.1, 115.3, 181.4, 243.3, 339.9 mg/L on phenol uptake. The efficiency of removal from aqueous solution was higher within the pH 6-8 range, with the maximum of 100% at pH 7 after 24 hours of adsorption time. The highest specific rate was observed as 165.1 mg/g in the presence of 339.9 mg/l initial phenol concentration. The Freundlich adsorption models were fitted to the equilibrium data, which indicated that phenol ions were favourably adsorbed by Phormidium sp.