Promotion by humus-reducing bacteria for the degradation of UV254 absorbance in reverse-osmosis concentrates pretreated with O3-assisted UV-Fenton method

Selective production of singlet oxygen for harmful cyanobacteria inactivation and cyanotoxins degradation: Efficiency and mechanisms

Knowledge about the impact of singlet oxygen (¹O₂) on the characteristics and inactivation of harmful cyanobacterial organic matter is limited. In this study, the feasibility of using an improved single-iron doped graphite-like phase carbon nitride catalyst (FeCN) to activate peroxymonosulfate (PMS) catalytic production of ¹O₂ to inactivate four harmful cyanobacteria was investigated. The inactivation efficiencies at 30 min were 92.77%, 66.84%, 91.06%, and 93.45% for Microcystis aeruginosa (M. aeruginosa), Nodularia harveyana, Oscillatoria sp., and Nostoc sp., respectively. This was associated with adjusting experimental parameters, such as the FeCN and PMS doses and initial pH, to obtain the maximum ¹O₂ yield. The quenching experiment results and electron paramagnetic resonance spectra showed that ¹O₂ generated via the non-radical pathway might play a dominant role in inactivating harmful cyanobacteria and degrading harmful algal toxins (Microcystin-LR and Nodularin). In addition, the FeCN-PMS system not only effectively destroyed the integrity of harmful cyanobacterial cells but also effectively degraded cyanobacterial toxins, thereby preventing severe secondary contamination by cell rupture. A possible removal mechanism was proposed. This reveals the potential of ¹O₂ to simultaneously inactivate harmful cyanobacteria and degrade harmful cyanobacterial toxins.

Removing organic matters from reverse osmosis concentrate using advanced oxidation-biological activated carbon process combined with Fe3+/humus-reducing bacteria

The high-concentration wastewater produced in the industrial reverse osmosis (RO) process contains a large amount of refractory organic matters, which will have serious impacts on the natural environment and human health. Among them, contaminants can be transformed by humus-reducing bacteria based on humus. In this study, O₃- assisted UV-Fenton method was applied as pretreatment. Biological activated carbon (BAC) technology in which humus-reducing bacteria were the dominant bacteria, enhanced by electron donor and Fe³⁺, was used to dispose of RO concentrate (ROC). The results showed that water treatment process combining oxidation with biological filtration had a positive effect on the removal of stubborn contaminants in ROC. The system was strengthened by adding electron donor and Fe³⁺, and the chemical oxygen demand (COD) removal efficiency was up to 80.1%. However, when the removal efficiency of UV₂₅₄ absorbing pollutants reached optimal value (87.3%), that means only Fe³⁺ was added.

Comparing the performance of various nanofiltration membranes in advanced oxidation-nanofiltration treatment of reverse osmosis concentrates

Reverse osmosis (RO) technique plays an important role in the treatment of secondary biochemical effluent. However, the reverse osmosis concentrate (ROC) with high salinity and organic pollutants generated from this process remains a challenge to be tackled. The O₃-assisted UV-Fenton advanced oxidation process (AOP) as a pretreatment for the nanofiltration (NF) was used to treat the ROC of industrial wastewater. The optimal removal rates of COD and UV₂₅₄ were 80.4 and 77.4%, respectively. In the NF process, four types of commercial NF membranes (NF90 (Dow, USA), DK (GE, USA), NT101, and NT103 (NADIR, Germany)) were used to treat the AOP effluent. The effects of operating pressure and feed temperature on ion rejection were investigated. The results show that NF90 and NT103 membranes had better rejections to monovalent ions, while DK and NT101 membranes could effectively separate monovalent and divalent ions and their ion rejections decreased with the increase of feed temperature. With the NF90 membrane, the highest TDS removal rate of 89.65% was obtained at the operating pressure of 1.2 MPa.