Enhanced photocatalytic degradation of sulfamethoxazole by deposition of Au, Ag and Cu metallic nanoparticles on TiO2

Bimetallic Au/Ag coated on In2O3 for the effective removal of emerging organic contaminants under natural sunlight irradiation

Antibiotics-polluted wastewater, likely causing the spread of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs), can be effectively remediated by photocatalytic degradation driven by endless solar energy. Herein, bimetallic Au/Ag is deposited on In2O3 surface via a one-step sintering process followed by a controllable chemical reduction approach. Under natural sunlight irradiation, the optimal Au/Ag/In2O3 (UGI-1.0) photocatalyst possesses a considerable norfloxacin (NOR) degradation rate constant of 0.013 min-1, which is 3.25, 1.63, and 1.86 times higher than that of In2O3, Ag/In2O3, and Au/In2O3 respectively. The effect of many water characteristics (e.g., humic acid, water bodies, pH values, and coexisting anions) on the photodegradation performance of NOR over UGI-1.0 is investigated. Moreover, other persistent organic pollutants (ofloxacin, phenol, 2,4-dichlorophenol, and rhodamine B) can also be degraded over UGI-1.0, suggesting its universal oxidation capacity. To settle the challenge of powder photocatalyst recovery, the UGI-1.0 photocatalyst is coated on a frosted glass sheet, which exhibits outstanding activity and stability for degrading NOR. The bimetallic Au/Ag deposited on In2O3 promote its photo-absorption, and enhance its photoinduced charge separation and transfer efficiency by serving as electron accepter, leading to the boosted activity of Au/Ag/In2O3 catalysts. Particularly, the cultivation of staphylococcus aureus (S. aureus) and cabbage seeds reveals the efficient toxicity reduction of NOR by photocatalytic degradation and the nontoxic characteristic of UGI-1.0 catalyst. This work unveils the feasibility of UGI-1.0 to remediate real wastewater with the assistance of solar energy.

Degradation pathways of sulfamethoxazole under phototransformation processes: A data base of the major transformation products for their environmental monitoring

Sulfamethoxazole (SMX) is frequently detected in wastewater and aquatic environments worldwide at concentrations from ng L-1 to μg L-1. Unfortunately, SMX is not completely removed in municipal wastewater treatment plants (WWTPs), thus, SMX and their transformation products (TPs) are discharged into aquatic environments, where can be transformed by phototransformation reactions. In this study, the phototransformation of SMX as well as generation of their major TPs under photolysis and photocatalysis processes was reviewed. SMX can be totally removed under photolysis and photocatalysis processes in aqueous solutions using simulated or natural radiation. Degradation pathways such as isomerization, hydroxylation, fragmentation, nitration, and substitution reactions were identified during the generation of the major TPs of SMX. Particularly, 26 TPs were considered for the creation of a data base of the major TPs of SMX generated under phototransformation processes. These 26 compounds could be used as reference during the SMX monitoring both wastewater and water bodies, using analytic methodologies such as target analysis and suspect screening. A data base of the major TPs of pharmaceuticals active compounds (PhACs) as SMX could help to implementation of best environmental monitoring programs for the study of the environmental risks both PhACs and their TPs with highest occurrence in aquatic environments.

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Pd nanoparticles decorated BiVO4 pine architectures for photocatalytic degradation of sulfamethoxazole

Sulfamethoxazole (SMX) has been extensively detected in wastewater treatment plant effluents and surface water. Because of its potential risks to ecology and health, treatment for eliminating SMX is urgently required. In this study, we report the application of Pd nanoparticles decorated on BiVO₄ pine architecture for the photocatalytic degradation of SMX. The results showed that the barer BiVO₄ and Pd-BiVO₄ eliminated SMX under visible-light irradiation. After 210 min of irradiation, 98.8% of SMX was substantially eliminated by Pd-BiVO₄, whereas bare BiVO₄ can degraded approximately 36.3% of SMX. Pd-BiVO₄ also exhibited a high mineralization rate (84% of total organic carbon (TOC) removal) compared to bare BiVO₄ (51% of TOC removal). Through three-dimensional excitation-emission matrix fluorescence spectra, SMX with high fluorescence intensity can be degraded to non-fluorescence intermediate products, further confirming the high mineralization of SMX over Pd-BiVO₄ catalyst. Well-dispersed Pd nanoparticles on the {040} facet of BiVO₄ pine architecture can support the recombination of photogenerated charge carriers because of the formation of the Schottky junction at the Pd-BiVO₄ interface. Besides, the active species trapping tests indicated that ^•O₂^- and h⁺ radicals dominate SMX photodegradation over Pd-BiVO₄. The main degradation intermediates of SMX in the reaction solution was also identified through ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry analysis. This investigation can provide insight into designing metallic/semiconductor junctions for antibiotic elimination in water media.

Novel cubical Ag(NP) decorated titanium dioxide supported bentonite thin film in the efficient removal of bisphenol A using visible light

The persistent endocrine-disrupting chemical bisphenol A is posing serious health concerns; hence, it is known to be an emerging and potential water contaminant. The present investigation aims to synthesize novel cubical Ag(NP) decorated titanium dioxide-supported bentonite (Ag/TiO₂@Clay) nanocomposite using a novel synthetic process. The nanocomposite materials were characterized by several analytical methods viz., transmission electron microscopy (TEM), X-ray diffraction (XRD) analyses, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). Further, the photocatalytic removal of bisphenol A was conducted utilizing the thin film catalyst under the LED (light emitting diode; visible light) and UV-A (ultra violet-A) light sources. The parametric studies solution pH (6.0-12.0), pollutant concentrations (1.0-20.0 mg/L), and the interaction of several scavengers and co-existing ions are studied extensively to demonstrate the insights of the removal mechanism. The mineralization of bisphenol A and repeated use of the thin film catalyst showed the potential usage of photocatalysts in the devised large-scale operations. Similarly, the natural matrix treatment was performed to evaluate the suitability of the process for real implications.

Novel nanocomposite thin film in the efficient removal of antibiotics using visible light: Insights of photocatalytic reactions and stability of thin film in real water implications

Novel clay (bentonite) supported Ag⁰ nanoparticles (NPs) doped TiO₂ nanocomposite (Clay/TiO₂/Ag⁰(NPs)) thin film was obtained by using template synthesis method. The nanocomposite material is decorated with cubical Ag⁰(NPs) and utilised successfully in the photocatalytic degradation of tetracycline (TC) and sulfamethazine (SMZ) from aqueous solutions utilizing visible light and UV-A radiations. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) analyses were used to characterise the nanocomposite materials. Diffusion reflectance spectroscopy (DRS) was utilised to determine the bandgap energies of the materials and also to confirm that Ag⁰(NPs) was successfully doped with TiO₂. The nanocomposite material showed highly efficient photocatalytic activity for the breaking down of TC/SMZ under visible light irradiation by the enhanced electron-hole separation and adsorption of antibiotics at the vicinity of the catalyst. The oxidative degradation of TC/SMZ were shown to be highly dependent on the pH, initial concentration of TC/SMZ, and various co-existing ions. Reusability test of Clay/Ag⁰(NPs)/TiO₂ nanocomposite revealed that the activity did not decline with repeated use. Treatment of TC and SMZ in real water system further enhanced the application potential of the novel catalysts for the treatment of full-scale wastewater polluted with these antibiotics.

Photocatalytic degradation of sulfamethoxazole using TiO2-based materials - Perspectives for the development of a sustainable water treatment technology

Heterogeneous photocatalysis using titanium dioxide-based materials is considered a promising and innovative solution to the water pollution problem. However, due to the limitations concerning the use of the developed materials and the applied photodegradation conditions, the research on photoremediation using TiO₂ often stays behind the lab door. The challenge is to convert the basic research into a successful innovation, leading to the implementation of this process into wastewater treatment. For this purpose, the most active materials and optimal photodegradation conditions must be chosen. This article collects and compares the studies on photocatalytic degradation of an emerging pollutant - sulfamethoxazole, an antibacterial drug - and attempts to find the best approaches to be successfully applied on an industrial scale. Various types of TiO₂-based photocatalysts are compared, including different nanoforms, doped or polymer-based composites, composites with graphene, activated carbon, dyes or natural compounds, as well as possible supporting materials for TiO₂. The paper covers the impact of the irradiation source (natural sunlight, LED, mercury or xenon lamps) and water matrix on the photodegradation process, considering the ecological and economic sustainability of the process. Emphasis is put on the stability, ease of separation and reuse of the photocatalyst, power and safety of the irradiation source, identification of photodegradation intermediates and toxicity assays. The main approaches are critically discussed, main challenges and perspectives for an effective photocatalytic water treatment technology are pointed out.

Kinetic and mechanism investigation on the gamma irradiation induced degradation of quizalofop-p-ethyl

An efficient gamma radiolytic decomposition of one of the extensively used herbicides in the world quizalofo-p-ethyl (QPE) was explored under different experimental conditions. Aqueous solutions of QPE were irradiated by gamma rays emitted by a Cobalt 60 source. QPE aqueous solutions were irradiated at doses of 0.5-3 kGy with 26.31 Gy min^-1 dose rate. Obtained results indicated that removal efficiency of 98.5% and 73% of QPE were obtained, respectively, in absence and in presence of dissolved oxygen. Change of absorption spectra, pH effect and Total Organic Carbon (TOC) were carried out and studied. It was found that all absorption bands decreased with increasing irradiation dose and disappear totally after 3 kGy applied dose. Three pH conditions (pH = 10, pH = 6.2 and pH = 3) were applied in radiolytic degradation of QPE showing that the best removal efficiency has been found for neutral pH. Interestingly, the % TOC removal reaches 98% at 3 kGy indicated practically total mineralization. Furthermore, spectrophotometric analyses argued in favour of a pseudo-first-order kinetic of QPE degradation. The resulting apparent rate constant value is approximately k_app = (0.012 ± 0.001) min^-1. Finally, several by-products such as 6-chloroquinoxalin -2-ol, 2-(4-hydroxy-phenyoxy) propionate, 1,4-hydroquinone, quinone, 4-chlorobenzene-1,2diol and 1,2,4-benzenetriol were identified by gas chromatography-mass spectrometry (GC/MS) evidencing that radiation process starting with the fragmentation of the molecule involving the hydroxyl radical, which is generated by the radiolysis of water. Based on the identification intermediates, a degradation mechanistic schema of QPE has been proposed.

Efficient removal of antibiotics from water resources is a public health priority: a critical assessment of the efficacy of some remediation strategies for antibiotics in water

This review discusses the fundamental principles and mechanism of antibiotic removal from water of some commonly applied treatment techniques including chlorination, ozonation, UV-irradiation, Fenton processes, photocatalysis, electrochemical-oxidation, plasma, biochar, anaerobicdigestion, activated carbon and nanomaterials. Some experimental shortfalls identified by researchers such as certain characteristics of degradation agent applied and the strategies explored to override the identified limitations are briefly discussed. Depending on interactions of a range of factors including the type of antibiotic compound, operational parameters applied such as pH, temperature and treatment time, among other factors, all reviewed techniques can eliminate or reduce the levels of antibiotic compounds in water to varying extents. Some of the reviewed techniques such as anaerobic digestion generally require longer treatment times (up to 360, 193 and 170 days, according to some studies), while others such as photocatalysis achieved degradation within short contact time (within a minimum of 30, but up to 60, 240, 300 and 1880 minutes, in some cases). For some treatment techniques such as ozonation and Fenton, it is apparent that subjecting compounds to longer treatment times may improve elimination efficiency, whereas for some other techniques such as nanotechnology, application of longer treatment time generally meant comparatively minimal elimination efficiency. Based on the findings of experimental studies summarized, it is apparent that operational parameters such as pH and treatment time, while critical, do not exert sole or primary influence on the elimination percentage(s) achieved. Elimination efficiency achieved rather seems to be due more to the force of a combination of several factors.

Gamma irradiation-induced degradation and mineralization of methocarbamol in aqueous solution

Gamma irradiation degradation of the extensively used muscle relaxant in the world methocarbamol (MET) was studied. MET aqueous solutions were irradiated by gamma rays emitted by a Cobalt 60 source at doses of 1-4 kGy. Our findings demonstrated that gamma irradiation degraded more than 98.5% of MET. Absorption spectra analysis revealed that when increased irradiation dose, the absorption bands declined with complete disappearance at 4 kGy dose. Additionally, the most radiolytic degradation rate was recorded at neutral pH, marked by Total Organic Carbon (TOC) removal rate of 98% reflecting the total mineralization of MET at 4 kGy. In-depth spectrophotometric analyses advocated a pseudo-first-order type of MET degradation kinetics. The obtained apparent rate constant value was k_{app, MET} = (0.02167 ± 0.0006) min^-1. Gas chromatography-mass spectrometry (GC-MS) allowed the detection of 3-(o-methoxyphenoxy)-1,2 propanediol,2-methoxyphenol, 1,2,3 propanetriol, 1,2-dihydroxybenzene and 1,2,4 benzentriol identified as by-products generated during radiolytic degradation. Finally, an outline of the degradation mechanism was suggested according to the obtained by-products.

Complete decomposition of sulfamethoxazole during an advanced oxidation process in a simple water treatment system

A simple water treatment system consisting of a deep UV light (λ = 222 nm) source, a mesoporous TiO₂/boron-doped diamond (BDD) photocatalyst, and a BDD electrode was prepared and used to decompose sulfamethoxazole (SMX) in an advanced oxidation process. The mesoporous TiO₂/BDD photocatalyst used with the electrochemical treatment promoted SMX decomposition, but the mesoporous TiO₂/BDD photocatalyst alone had a similar ability to decompose SMX as photolysis. Fragments produced through photocatalytic treatment were decomposed during the electrochemical treatment and fragments produced during the electrochemical treatment were decomposed during the photocatalytic treatment, so performing the electrochemical and photocatalytic treatments together effectively decomposed SMX and decrease the total organic carbon concentration to a trace.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

Comparative photocatalytic dye and drug degradation study using efficient visible light-induced silver phosphate nanoparticles

The industrialization, growing population, and human activities (e.g., liquid waste of households, industrial units, and agricultural lands) are the main causes to contaminate fresh water sources. To overcome this issue, many techniques have been applied for water purification and chemical oxidation is one of the effective ways to treat the wastewater called as advanced oxidation process (AOPs). In the present study, synthesized silver phosphate nanoparticles were employed as catalysts in the photocatalytic advanced oxidation process for the degradation of various dyes (RhB, MB, MO, and OG) and drug (SMZ). The photocatalyst was characterized through different analytical tools, e.g., PXRD, FTIR, UV-Vis DRS, DLS, FESEM, and HRTEM. The chemical behavior or interaction of dye molecule with catalyst surface has also been explored to understand the mechanism of photodegradation reaction. All the organic dyes and drugs showed pseudo first-order rate kinetics and it was found that RhB dye and SMZ drug degraded so fast by the photocatalyst. The maximum observed photodegradation rate was 0.0744 min^-1 for SMZ drug and 0.0532 min^-1 for RhB dye, respectively. The minimum dye degradation was observed ~ 0.0036 min^-1 for OG, which is ~ 15 times lesser than the degradation rate of RhB dye. From the comparative dye degradation study, it was found that the photodegradation efficiency of organic pollutants depends on the surface charge of the photocatalyst. The role of photogenerated reactive species (holes, superoxides, and hydroxyl free radicals) was also studied using different types of scavengers which helped to understand the photochemical reactions and mechanism by photocatalyst. The real sample analysis of textile effluent was also performed using the best photocatalyst in the presence of light.

Photocatalytic degradation of cephalexin by g-C3N4/Zn doped Fe3O4 under visible light

In this work, we reported synthesis of a novel magnetically separable g-C₃N₄/Zn doped Fe₃O₄ composite (g-CN/ZnFe) by a simple polyol thermal method. The characteristics of the as-prepared composite was checked by XRD, SEM, TEM, XPS, PL technologies. The optimized weight ratio of g-C₃N₄ and Zn doped Fe₃O₄ was investigated. In addition, the photocatalytic activities of the composite products were checked by degradation of Cephalexin (CEX) under visible light. The results showed that g-CN/ZnFe composite with an added 20% g-C₃N₄ exhibited the highest photocatalytic activity for cephalexin under visible light irradiation. The improved photocatalytic activity of 20% g-CN/ZnFe can be ascribed to the low combination rate of photoinduced electron/hole pairs. Especially, g-CN/ZnFe can be recovered easily by using an external magnetic field and has the high stability after six runs. These properties of the g-CN/ZnFe as-prepared composite could be a promising photocatalyst for the degradation of pharmaceutical contaminants.

N/Fe/Zn co-doped TiO2 loaded on basalt fiber with enhanced photocatalytic activity for organic pollutant degradation

To avoid the loss of catalytic material powder, a loaded catalytic material of TiO2 with basalt fiber as the carrier (TiO2@BF) was synthesized by an improved sol-gel method. The TiO2@BF was doped with different contents of N, Fe and Zn elements and was used to degrade rhodamine B (RhB) under ultraviolet light. The physical characterization analysis indicated that the co-doping of the N, Fe and Zn elements had the effects of reducing grain size, increasing sample surface area, and narrowing the electronic band gap. The electronic band gap of nitrogen-iron-zinc co-doped TiO2@BF (N/Fe/Zn_TiO2@BF) was 2.80 eV, which was narrower than that of TiO2@BF (3.11 eV). The degradation efficiency of RhB with N/Fe/Zn_TiO2@BF as a photocatalyst was 4.3 times that of TiO2@BF and its photocatalytic reaction was a first-order kinetic reaction. Quenching experiments suggested that the reactive species mainly include photoinduced holes (h+), superoxide radicals (˙O2 -) and hydroxyl radicals (˙OH). In brief, this study provides a prospective loaded catalytic material and routine for the degradation of organic contaminants in water by a photocatalytic process.

Present applications of titanium dioxide for the photocatalytic removal of pollutants from water: A review

The evolution of modern technology and industrial processes has been accompanied by an increase in the utilization of chemicals to derive new products. Water bodies are frequently contaminated by the presence of conventional pollutants such as dyes and heavy metals, as well as microorganisms that are responsible for various diseases. A sharp rise has also been observed in the presence of new compounds heretofore excluded from the design and evaluation of wastewater treatment processes, categorized as "emerging pollutants". While some are harmless, certain emerging pollutants possess the ability to cause debilitating effects on a wide spectrum of living organisms. Photocatalytic degradation has emerged as an increasingly popular solution to the problem of water pollution due to its effectiveness and versatility. The primary objective of this study is to thoroughly scrutinize recent applications of titanium dioxide and its modified forms as photocatalytic materials in the removal and control of several classes of water pollutants as reported in literature. Different structural modifications are used to enhance the performance of the photocatalyst such as doping and formation of composites. The principles of these modifications have been scrutinized and evaluated in this review in order to present their advantages and drawbacks. The mechanisms involved in the removal of different pollutants through photocatalysis performed by TiO2 have been highlighted. The factors affecting the mechanism of photocatalysis and those affecting the performance of different TiO2-based photocatalysts have also been thoroughly discussed, thereby presenting a comprehensive view of all aspects involved in the application of TiO₂ to remediate and control water pollution.

A promising Ag2CrO4/LaFeO3 heterojunction photocatalyst applied to photo-Fenton degradation of RhB

Ag₂CrO₄ nanoparticles (10-35 nm) were assembled onto LaFeO₃ nanoparticles (20-60 nm) via a facile chemical precipitation method to form novel Ag₂CrO₄-LaFeO₃ heterojunction composite photocatalysts. The prepared Ag₂CrO₄-LaFeO₃ composites were characterized by XRD, SEM, TEM, XPS, BET, UV-vis DRS, PL spectroscopy and EIS and photocurrent response. The TEM result clearly shows that Ag₂CrO₄ particles are decorated onto LaFeO₃ particles to form Ag₂CrO₄-LaFeO₃ heterojunction. Compared to bare LaFeO₃, the 10%Ag₂CrO₄-LaFeO₃ composite exhibits a slightly increased BET specific surface area, increased photocurrent density, decreased charge-transfer resistance and decreased PL emission peaks. Using simulated sunlight as the light source and in the presence of H₂O₂, the photo-Fenton performance of the composite photocatalysts toward the degradation of RhB was investigated, revealing that they manifest significantly enhanced photo-Fenton degradation of RhB when compared with bare LaFeO₃ and Ag₂CrO₄. Among the composite photocatalysts, 10%Ag₂CrO₄-LaFeO₃ exhibits the highest photo-Fenton activity, which is about 3.1 and 2.5 times higher than that of bare LaFeO₃ and Ag₂CrO₄, respectively. This is attributed to the fact that the composite photocatalysts have highly efficient separation of photogenerated electron-hole pairs due to the formation of Ag₂CrO₄-LaFeO₃ heterojunctions. Active species trapping experiments and ·OH detection experiments were carried out, from which it is concluded that ·OH radicals are the dominant reactive species causing the dye degradation. A synergistic mechanism was proposed to elucidate the enhanced photo-Fenton activity of Ag₂CrO₄-LaFeO₃ heterojunction composites.

Intensified Photocatalytic Degradation of Solophenyl Scarlet BNLE in Simulated Textile Effluents Using TiO2 Supported on Cellulosic Tissue

The Heterogeneous photocatalysis, increasingly used in effluent purification, is attracting more and more attention by the development of new photocatalytic materials based on semiconductors deposited on various supports. In this work, TiO2 supported on cellulosic fiber was prepared and characterized by different analytical techniques such as X-ray Photoelectron Spectrometry and Brunauer-Emmett-Teller surface area. Its photocatalytic activity was investigated for the degradation of Solophenyl Scarlet BNLE (SS), an organic pollutant present in textile effluents. Several conditions were investigated such as adsorption under UV and visible irradiation, catalyst recyclability, the simulated effluent pH and the presence of H2O2 as an oxidant agent. Results showed that under UV light, the removal of SS decreased significantly with increasing initial dye concentration. For an initial concentration of 5 mg/L, SS degradation was reached more than 95 % after 2 hours of treatment (neutral pH, T = 20 °C). The supported TiO2 on cellulose remains effective over four cycles of dye treatment. In the presence of H2O2, the degradation process was inhibited with increasing the molar ratio [H2O2]/[SS]0 from 5 to 30. The kinetic modeling showed that the removal of this pollutant followed a pseudo-first-order model (Langmuir-Hinshelwood) with a regression coefficient (R2) value of 0.984.

Fabrication of a double-helical photocatalytic module for disinfection and antibiotics degradation

A double-helical photocatalytic module was fabricated via an annealing process following an anodic oxidation procedure, and installed into a commercial UV sterilizer to structure continuous-flow photocatalytic device. Benefiting from the superior mass transfer of double-helical structure to common flat plate or corrugated plate, as well as the improved adhesion between Ti support and TiO₂ layer, the photocatalytic device displayed potential in practical disinfection and degradation of organics. During photocatalytic disinfection process with 21 mJ/cm² of UV dose, the concentration of Escherichia coli decreased from 1.71 × 10⁷  CFU/L (typical for municipal wastewater) in influent to 2,720 CFU/L in effluent water, which met the wastewater discharged standard of China. Escherichia coli reactivation ratio for the photocatalytic device was only one-tenth of that for UV sterilizer. Furthermore, taking phenol, bisphenol A, and four antibiotics as targets, the device was demonstrated to promote the degradation of photodegradable pollutants via photocatalysis. These results highlight a feasibility of photocatalytic technology as a supporting role in practical wastewater treatment. PRACTITIONER POINTS: TiO₂ nanotube array was embedded in the surface of double-helical Ti support to avoid detachment. This double-helical photocatalytic module was installed into a commercial UV sterilizer to structure a continuous-flow device. The continuous-flow device was effective in sterilizing bacteria and decomposing photodegradable organic pollutants in wastewater. Improving the performance of UV technology was proposed as a feasible approach for the practical application of photocatalysis.

Solar Photocatalytic Degradation of Sulfamethoxazole by TiO2 Modified with Noble Metals

Application of solar photocatalysis for water treatment is intensively studied. In this work, we investigated TiO2 modified with platinum (Pt/TiO2) and palladium (Pd/TiO2) using sulfamethoxazole (SMX) as the model contaminant. We considered the following parameters: (i) level of TiO2 modification with Pt/Pd, (ii) initial concentration of photocatalysts, (iii) geographic location where processes were conducted, and (iv) natural water matrix. The catalysts characterized by SEM, EDX, DRS, and XRD techniques showed successful deposition of Pd and Pt atoms on TiO2 surface that enabled light absorption in the visible (Vis) range, and therefore caused efficient SMX removal in all tested conditions. A comparison of the rate constants of SMX degradation in various conditions revealed that modification with Pd gave better results than modification with Pt, which was explained by the better optical properties of Pd/TiO2. The removal of SMX was higher with Pd/TiO2 than with Pt/TiO2, independent of the modification level. In the experiments with the same modification level, similar rate constants were achieved when four times the lower concentration of Pd/TiO2 was used as compared with Pt/TiO2. Formation of four SMX transformation products was confirmed, in which both amine groups are involved in photocatalytic oxidation. No toxic effect of post-reaction solutions towards Lepidium sativum was observed.

Effect of Different Radiation Sources and Noble Metal Doped onto TiO2 for Contaminants of Emerging Concern Removal

Water scarcity is a worldwide problem boosted by global warming and pollution of anthropogenic origin. The contaminants of emerging concern in water sources are increasing due to the inefficiency of conventional wastewater treatments, and these should be mitigated. Advanced oxidation processes appear as suitable solutions for decontamination. The photocatalytic oxidation of the mixture of sulfamethoxazole, carbamazepine and lorazepam was investigated. TiO2 modified by Ag and TiO2 modified by Pd were used as photocatalysts to improve photoactivity. The impact of light wavelengths was examined using UVA and visible radiation as well as natural sunlight. Visible light revealed the lowest ability for decontamination in 60 min of irradiation through Ag and Pd–TiO2 photocatalytic oxidation. On the other hand, UVA and sunlight in the presence of photocatalysts were able to totally remove the contaminants. This can be related to the high production of reactive oxidative species at those conditions. The increase of the noble metal load promotes the improvement of the decontamination efficiency. The kinetic rate was analyzed for UVA and sunlight radiation for different photocatalytic conditions. The presence of a natural light source without energy costs leads to an increase in the pseudo-first-order kinetic constant. Sunlight radiation with a suitable photocatalyst can be a very good option for water decontamination.