Degradation of glyphosate herbicide by an electro-Fenton process using carbon felt cathode

Enhanced Power Generation Using a Dual-Surface-Modified Hematite Photoanode in a Direct Glyphosate Photo Fuel Cell

Given the current and escalating global energy and environmental concerns, this work explores an innovative approach to mitigate a widely employed commercial herbicide using a direct glyphosate (Gly) photocatalytic fuel cell (PFC). The device generates power continuously by converting solar radiation, degrading and mineralizing commercial glyphosate-based fuel, and reducing sodium persulfate at the cathode. Pristine and modified hematite photoanodes were coupled to Pt/C nanoparticles dispersed in a carbon paper (CP) support (Pt/C/CP) dark cathode by using an H-type cell. The Gly/persulfate PFC shows a remarkable current and power generation enhancement after dual-surface modification of pristine hematite with segregated Hf and FeNiOx cocatalysts. The optimized photoanode elevates maximum current density (Jmax) from 0.35 to 0.71 mA cm-2 and maximum power generation (Pmax) from 0.04 to 0.065 mW cm-2, representing 102.85 and 62.50% increase in Jmax and Pmax, respectively, as compared to pristine hematite. The system demonstrated stability over a studied period of 4 h; remarkably, the photodegradation of Gly proved substantial, achieving ∼98% degradation and ∼6% mineralization. Our findings may significantly contribute to reducing Gly's environmental impact in agribusiness since it may convert the pollutant into energy at zero bias. The proposed device offers a sustainable solution to counteract Gly pollution while concurrently harnessing solar energy for power generation.

Coupling of the optimized electro-Fenton-like process with pulsed laser ablation method to produce bimetallic nanoparticles of Fe°/Cu° and Fe°/Zn° in treatment of thiophene aqueous samples

In this study, an electro-Fenton-like method in the presence of iron particles was used for degradation of toxic thiophene pollutant from aqueous samples with performance >99%. In an electrolytic reactor, the effect of current density, H2O2 dosage, and pH of the sample on the treatment efficiency was investigated and optimized using the response surface method in the experimental design methodology. The conditions were optimized in current density of 20 mA/cm2, H2O2 dosage 500 ppm and pH = 3.0. In this process, a laser pulse ablation was used to produce iron nanoparticles in the electro-Fenton reactor to decrease the treatment time. Also, two bimetallic iron-copper and iron-zinc were used to investigate the synergistic effect of bimetallic catalyst on degradation efficiency of thiophene. The removal of thiophene nearly 100% can be provided in the presence Fe0.5/Cu0.5, Fe0.5/Zn0.5 and Fe alone in 10, 15 and 20 min, respectively. Also, the effect of hydroxyl scavenger and the consumption of catalysts were studied in the proposed procedure. Techniques of gas chromatography-flame ionization detector (GC-FID), gas chromatography-sulphur chemiluminescence detector (GC-SCD) and total sulphur analyser were used to follow thiophene degradation. A thiophene petrochemical wastewater was treated by the proposed method, and the results showed a significant reduction in amounts of chemical oxygen demand (COD) and biochemical oxygen demand (BOD).

Health effects of herbicides and its current removal strategies

The continually expanding global population has necessitated increased food supply production. Thus, agricultural intensification has been required to keep up with food supply demand, resulting in a sharp rise in pesticide use. The pesticide aids in the prevention of potential losses caused by pests, plant pathogens, and weeds, but excessive use over time has accumulated its occurrence in the environment and subsequently rendered it one of the emerging contaminants of concern. This review highlights the sources and classification of herbicides and their fate in the environment, with a special focus on the effects on human health and methods to remove herbicides. The human health impacts discussion was in relation to toxic effects, cell disruption, carcinogenic impacts, negative fertility effects, and neurological impacts. The removal treatments described herein include physicochemical, biological, and chemical treatment approaches, and advanced oxidation processes (AOPs). Also, alternative, green, and sustainable treatment options were discussed to shed insight into effective treatment technologies for herbicides. To conclude, this review serves as a stepping stone to a better environment with herbicides.

Simultaneous Desalination and Glyphosate Degradation by a Novel Electro-Fenton Membrane Distillation Process

The industrial effluent from glyphosate production has high salinity and refractory organic contaminants. The removal of organics and the recycling of inorganic salts from this kind of water are challenging issues. In this study, electro-Fenton (EF) and membrane distillation (MD) were coupled in a single reactor utilizing a membrane-based electrode (Mem-GDE) with the ability to bidirectionally transfer vapor and oxygen and electrochemically synthesize H2O2. The operating thermal conditions for MD significantly promoted Fenton reactions and, thus, the removal of glyphosate. During operation, Fe species deposited on the Mem-GDE and enhanced its catalytic activity and adsorptive capacity, which markedly increased the apparent reaction rate constant of glyphosate by 6 times. This novel EF-MD process simultaneously removed organics and concentrated the inorganics, which is very meaningful for decreasing the costs for subsequent crystallization and achieving high-quality crystal salts. This study provides an efficient method for the treatment of organic-inorganic hybrid wastewater.

Multiple design and modelling approaches for the optimisation of carbon felt electro-Fenton treatment of dye laden wastewater

This study utilizes artificial intelligence and statistical modelling to optimize the operating parameters of a carbon-based electro-Fenton process for purifying model dye (RB19)-contaminated wastewater. Multilevel experimental Box-Behnken and uniform deisgns (BBD, UD) with four variables were analysed using polynomial regression analysis (PRA) and artificial neural networks (ANN), while the process optimisation was done using desirability function. For the given testing range but different design matrices and runs, both designs predicted a maximum RB19 removal (RB19-RR) of 90 ± 2.1% at lowest energy consumption (EC) of 0.44 ± 2.5 Wh, when voltage, Na2SO4, FeSO4, and time were maintained as follows: 4-5.3 V, 7-11 mM, 0.4-0.6 mM, and 35-40 min, respectively. All the design-model combinations portrayed the similar senitivity analyses, revealing that RB19 degradation and EC are primarily influenced by electrolysis time and voltage. The performance assessment demonstrated that all the design-model combinations also excellently predicted for unseen conditions as the maximum root mean squared error (RMSE) value for RB19-RR was 4.07, while it was 0.072 for EC, however, BBD-ANN performance proved to be slightly better than others. Having ∼57% less experimentation, UD based models managed to accurately predict the results for unseen conditions as the statistical errors were quite insignificant, even in some cases, RMSE found to be less for UD compared to BBD, elucidating the potential of uniform design as an alternative of conventional factorial designs. Nevertheless, the prediction accuracy is also dependent on modelling approach, as in some cases ANN failed to predict the response precisely specially when dealing with small data. Furthermore, techno-economic evaluation results spell out the efficacy of carbon felt based enhanced electro-Fenton process as promising environmental remediation technology and highlight its practical implication from view of operational cost.

Insight into n-CaO2/SBC/Fe(II) Fenton-like system for glyphosate degradation: pH change, iron conversion, and mechanism

Glyphosate has significant adverse effects on creature and ecological balance. Therefore, the efficient treatment of glyphosate wastewater is of great significance. In this study, nano calcium peroxide (n-CaO₂) was loaded onto activated sludge biochar (SBC), and then Fe(II) was added to construct a Fenton-like system (n-CaO₂/SBC/Fe(II)). SBC played the role of both a dispersant and catalyst, which greatly improved the removal capability of glyphosate. The removal efficiency of glyphosate in the n-CaO₂/SBC/Fe(II) system was as high as 99.6%. The persistent free radicals (PFRs) on SBC can promote the conversion of Fe(III) to Fe(II) in the reaction system, and Fe(II) can be maintained at about 15 mg L^-1 until the reaction reached equilibrium. Due to the synergistic effect of Fe(II) hydrolysis and SBC catalysis, n-CaO₂/SBC/Fe(II) system can effectively remove glyphosate in a wide initial pH range (4.0-10.0), and the pH of the reaction system can be remained in a suitable environment (4.0-6.0) for Fenton-like reaction. Advanced oxidation and chemical precipitation were the main mechanisms for the removal of glyphosate. Most of glyphosate could be oxidized into H₂PO^-₄ anions by breaking the bonds of C-P and C-N, and the H₂PO^-₄ can be further adsorbed and bounded on the surface of the composites. This system overcomes the shortcomings of pH rising and Fe(III) precipitation in the CaO₂-based oxidation systems, and realizes the efficient and complete degradation for glyphosate.

Feasibility of a Heterogeneous Nanoscale Zero-Valent Iron Fenton-like Process for the Removal of Glyphosate from Water

Glyphosate is a widely used herbicide, and it is an important environmental pollutant that can have adverse effects on human health. Therefore, remediation and reclamation of contaminated streams and aqueous environments polluted by glyphosate is currently a worldwide priority. Here, we show that the heterogeneous nZVI-Fenton process (nZVI + H₂O₂; nZVI: nanoscale zero-valent iron) can achieve the effective removal of glyphosate under different operational conditions. Removal of glyphosate can also take place in the presence of excess nZVI, without H₂O₂, but the high amount of nZVI needed to remove glyphosate from water matrices on its own would make the process very costly. Glyphosate removal via nZVI--Fenton was investigated in the pH range of 3-6, with different H₂O₂ concentrations and nZVI loadings. We observed significant removal of glyphosate at pH values of 3 and 4; however, due to a loss in efficiency of Fenton systems with increasing pH values, glyphosate removal was no longer effective at pH values of 5 or 6. Glyphosate removal also occurred at pH values of 3 and 4 in tap water, despite the occurrence of several potentially interfering inorganic ions. Relatively low reagent costs, a limited increase in water conductivity (mostly due to pH adjustments before and after treatment), and low iron leaching make nZVI-Fenton treatment at pH 4 a promising technique for eliminating glyphosate from environmental aqueous matrices.

Advances on removal of organophosphorus pesticides with electrochemical technology

Widespread use of organophosphorus pesticides (OPs), especially superfluous and unreasonable use, had brought huge harm to the environment and food chain. It is because only a small part of the pesticides sprayed reached the target, and the rest slid across the soil, causing pollution of groundwater and surface water resources. These pesticides accumulate in the environment, causing environmental pollution. Therefore, in recent years, the control and degradation of OPs have become a public spotlight and research hotspot. Due to its unique advantages such as versatility, environmental compatibility, controllability, and cost-effectiveness compatibility, electrochemical technology has become one of the most promising methods for degradation of OPs. The fundamental knowledge about electrochemical degradation on OPs was introduced in this review. Then, a comprehensive overview of four main types of practical electrochemical technologies to degrade pesticides were presented and evaluated. The knowledge contained herein should conduce to better understand the degradation of pesticides by electrochemical technology, and better exploit the degradation of pesticides in the environment and food. Overall, the objective of this review is to provide comprehensive guidance for rational design and application of electrochemical technology in the degradation of OPs for the safety of the environment and food chain in the future.

An effective natural mineral-catalyzed heterogeneous electro-Fenton method for degradation of an antineoplastic drug: Modeling by a neural network

In this study, the heterogeneous electro-Fenton method was used to remove Paclitaxel as an antineoplastic medicine. The cathode based on three-dimensional graphene (3DG) was applied as a gas diffusion electrode. The potential of five eco-friendly and recyclable iron minerals derived from nature (Magnetite, Siderite, Hematite, Limonite, and Pyrite) was investigated. Among the applied iron minerals, Pyrite showed the best, and Magnetite and Siderite showed good catalytic activity at pH 3.0. The current intensity of 300 mA, pH_i 7.0, Paclitaxel concentration of 3 mg L^-1, amount of Pyrite 4.5 g L^-1, and time of 120 min was the optimum condition of the process with the removal efficiency of 99.13% in the presence of Pyrite. Repeating the experiments eight times revealed the reusability of the prepared 3DG as a cathode. Also, using radical scavengers indicated the principal role of the hydroxyl radicals (OH) in the treatment process. Analysis of total organic carbon reached 77.64% mineralization of 3 mg L^-1 Paclitaxel at 360 min. Finally, ten by-products of small molecules were identified by gas chromatography-mass spectrometry device.

A charcoal-shaped catalyst NiFe2O4/Fe2O3 in electro-Fenton: high activity, wide pH range and catalytic mechanism

A charcoal-shaped catalyst NiFe₂O₄/Fe₂O₃ in electro-Fenton (EF) was synthesized by a facile precipitation approach via sintering products of oxalate co-precipitation. This obtained NiFe₂O₄/Fe₂O₃ catalyst was easily separated via an external magnetic field and was used as a heterogeneous electro-Fenton catalyst for rhodamine B (RhB, a target pollutant) degradation. Characteristics of NiFe₂O₄/Fe₂O₃ catalyst were assessed using scanning electron microscope (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Barrett-Emmett-Teller (BET), respectively. SEM results revealed that the proposed NiFe₂O₄/Fe₂O₃ was charcoal-shaped with the size in the range of 0.5-5 μm. Experiment results show that the EF process with the proposed catalyst could work in a wide pH range from 3 to 9. Under optimized conditions, estimated 90% RhB degradation was achieved in 60 min under the following conditions: 0.6 g/L NiFe₂O₄/Fe₂O₃, pH 3. Radical scavengers and electron spin resonance (ESR) spectra results demonstrated that the main oxidant species involved was ⋅OH, accounting for RhB degradation in EF. Moreover, according to our research on interfacial reaction, ⋅OH was mainly generated from the homogenous Fenton reaction rather than the surface Fenton reaction, stimulating by the dissolved Fe²⁺, Fe³⁺ and Ni²⁺ from catalyst. The reusability of NiFe₂O₄/Fe₂O₃ catalyst was evaluated for recycling the same catalyst for 5 runs. In conclusion, the facile fabrication NiFe₂O₄/Fe₂O₃ catalyst shows great potential in wastewater treatment with promising activity.

Technologies Employed in the Treatment of Water Contaminated with Glyphosate: A Review

Glyphosate [N-(phosphonomethyl)-glycine] is a herbicide with several commercial formulations that are used generally in agriculture for the control of various weeds. It is the most used pesticide in the world and comprises multiple constituents (coadjutants, salts, and others) that help to effectively reach the action's mechanism in plants. Due to its extensive and inadequate use, this herbicide has been frequently detected in water, principally in surface and groundwater nearest to agricultural areas. Its presence in the aquatic environment poses chronic and remote hazards to human health and the environment. Therefore, it becomes necessary to develop treatment processes to remediate aquatic environments polluted with glyphosate, its metabolites, and/or coadjutants. This review is focused on conventional and non-conventional water treatment processes developed for water polluted with glyphosate herbicide; it describes the fundamental mechanism of water treatment processes and their applications are summarized. It addressed biological processes (bacterial and fungi degradation), physicochemical processes (adsorption, membrane filtration), advanced oxidation processes-AOPs (photocatalysis, electrochemical oxidation, photo-electrocatalysis, among others) and combined water treatment processes. Finally, the main operating parameters and the effectiveness of treatment processes are analyzed, ending with an analysis of the challenges in this field of research.