Rapid removal of trace haloacetic acids from drinking water by a continuous adsorption process using graphene oxide

NaHCO3 addition enhances water permeance and Ca/haloacetic acids selectivity of nanofiltration membranes for drinking water treatment

The existence of disinfection by-products such as haloacetic acids (HAAs) in drinking water severely threatens water safety and public health. Nanofiltration (NF) is a promising strategy to remove HAAs for clean water production. However, NF often possesses overhigh rejection of essential minerals such as calcium. Herein, we developed highly selective NF membranes with tailored surface charge and pore size for efficient rejection of HAAs and high passage of minerals. The NF membranes were fabricated through interfacial polymerization (IP) with NaHCO3 as an additive. The NaHCO3-tailored NF membranes exhibited high water permeance up to ∼24.0 L m - 2 h - 1 bar-1 (more than doubled compared with the control membrane) thanks to the formation of stripe-like features and enlarged pore size. Meanwhile, the tailored membranes showed enhanced negative charge, which benefitted their rejection of HAAs and passage of Ca and Mg. The higher rejection of HAAs (e.g., > 90%) with the lower rejection of minerals (e.g., < 30% for Ca) allowed the NF membranes to achieve higher minerals/HAAs selectivity, which was significantly higher than those of commercially available NF membranes. The simultaneously enhanced membrane performance and higher minerals/HAAs selectivity would greatly boost water production efficiency and water quality. Our findings provide a novel insight to tailor the minerals/micropollutants selectivity of NF membranes for highly selective separation in membrane-based water treatment.

Drinking water treatment and associated toxic byproducts: Concurrence and urgence

Reclaimed water is highly required for environmental sustainability and to meet sustainable development goals (SDGs). Chemical processes are frequently associated with highly hazardous and toxic by-products, like nitrosamines, trihalomethanes, haloaldehydes, haloketones, and haloacetic acids. In this context, we aim to summarize the formation of various commonly produced disinfection by-products (DBPs) during wastewater treatment and their treatment approaches. Owing to DBPs formation, we discussed permissible limits, concentrations in various water systems reported globally, and their consequences on humans. While most reviews focus on DBPs detection methods, this review discusses factors affecting DBPs formation and critically reviews various remediation approaches, such as adsorption, reverse osmosis, nano/micro-filtration, UV treatment, ozonation, and advanced oxidation process. However, research in the detection of hazardous DBPs and their removal is quite at an early and initial stage, and therefore, numerous advancements are required prior to scale-up at commercial level. DBPs abatement in wastewater treatment approach should be considered. This review provides the baseline for optimizing DBPs formation and advancements in the remediation process, efficiently reducing their production and providing safe, clean drinking water. Future studies should focus on a more efficient and rigorous understanding of DBPs properties and degradation of hazardous pollutants using low-cost techniques in wastewater treatment.