Nutritional Approaches and Health-Related Properties of Plant Foods Processed by High Pressure and Pulsed Electric Fields

Artificial neural network-based shelf life prediction approach in the food storage process: A review

The prediction of food shelf life has become a vital tool for distributors and consumers, enabling them to determine storage and optimal edible time, thus avoiding unexpected food waste. Artificial neural network (ANN) have emerged as an effective, fast and accurate method for modeling, simulating and predicting shelf life in food. ANNs are capable of tackling nonlinear, complex and ill-defined problems between the variables without prior knowledge. ANN model exhibited excellent fit performance evidenced by low root mean squared error and high correlation coefficient. The low relative error between actual values and predicted values from the ANN model demonstrates its high accuracy. This paper describes the modeling of ANN in food quality prediction, encompassing commonly used ANN architectures, ANN simulation techniques, and criteria for evaluating ANN model performance. The review focuses on the application of ANN for modeling nonlinear food quality during storage, including dairy, meat, aquatic, fruits, and vegetables products. The future prospects of ANN development mainly focus on optimal models and learning algorithm selection, multiple model fusion, self-learning and self-correcting shelf-life prediction model development, and the potential utilization of deep learning techniques.

Effect of Novel Processing Techniques on the Carotenoid Release during the Production of Red Guava Juice

Red guava, distinguished by its elevated lycopene content, emerges as a promising natural source of carotenoids. This study systematically evaluates the impact of diverse processing techniques on the efficient release of carotenoids. The primary objective is to facilitate the transfer of carotenoids into the juice fraction, yielding carotenoid-enriched juice seamlessly integrable into aqueous-based food matrices. The untreated guava puree exhibited a modest release of carotenoids, with only 66.26% of β-carotene and 57.08% of lycopene reaching the juice. Contrastly, both high-pressure homogenization (HPH) at 25 MPa and enzyme (EM) treatment significantly enhanced carotenoid release efficiency (p < 0.05), while high hydrostatic pressure (HHP) at 400 MPa and pulsed electric field (PEF) of 4 kV/cm did not (p > 0.05). Notably, HPH demonstrated the most substantial release effect, with β-carotene and lycopene reaching 90.78% and 73.85%, respectively. However, the stability of EM-treated samples was relatively poor, evident in a zeta-potential value of -6.51 mV observed in the juice. Correlation analysis highlighted the interactions between pectin and carotenoids likely a key factor influencing the stable dissolution or dispersion of carotenoids in the aqueous phase. The findings underscore HPH as a potent tool for obtaining carotenoid-enriched guava juice, positioning it as a desirable ingredient for clean-label foods.

Equivalent processing for pasteurization of a pineapple juice-coconut milk blend by selected nonthermal technologies

Identifying equivalent processing conditions is critical for the relevant comparison of food quality attributes. This study investigates equivalent processes for at least 5-log reduction of Escherichia coli and Listeria innocua in pineapple juice-coconut milk (PC) blends by high-pressure processing (HPP), pulsed electric fields (PEF), and ultrasound (US) either alone or combined with other preservation factors (pH, nisin, and/or heat). The two blends (pH 4 and 5) and coconut milk (pH 7) as a reference were subjected to HPP at 300-600 MPa, 20°C for 0.5-30 min; PEF at an electric field strength of 10-21 kV/cm, 40°C for 24 µs; and US at 120 µm amplitude, 25 or 45°C for 6 or 10 min. At least a 5-log reduction of E. coli was achieved at pH 4 by HPP at 400 MPa, 20°C for 1 min; PEF at 21 kV/cm, 235 Hz, 40°C for 24 µs; and US at 120 µm, 45°C for 6 min. As L. innocua showed greater resistance, a synergistic lethal effect was provided at pH 4 by HPP with 75 ppm nisin at 600 MPa, 20°C for 5 min; PEF with 50 ppm nisin at 18 kV/cm, 588 Hz, 40°C for 24 µs; and US at 45°C, 120 µm for 10 min. The total soluble solids (11.2-12.4°Bx), acidity (0.47%-0.51% citric acid), pH (3.91-4.16), and viscosity (3.55 × 10^-3 -4.0 × 10^-3  Pa s) were not significantly affected under the identified equivalent conditions. HPP was superior to PEF and US, achieving higher ascorbic acid retention and lower color difference in PC blend compared to the untreated sample.

The Effect of Temperature-Assisted High Hydrostatic Pressure on the Survival of Alicyclobacillus acidoterrestris Inoculated in Orange Juice throughout Storage at Different Isothermal Conditions

The purpose of this work was to investigate the population dynamics of the spores and vegetative cells of A. acidoterrestris in orange juice treated with temperature-assisted HHP and stored in different isothermal conditions. For this reason, the spores of two A. acidoterrestris strains were inoculated in commercial orange juice and subjected to HHP treatment at 600 MPa/60 °C for 5 and 10 min. Inoculated samples were subsequently stored at 4, 12 and 25 °C for 60 days. During storage, the population of A. acidoterrestris was determined before and after heat shock at 80 °C for 10 min in order to estimate the quantity of spores and any remaining vegetative cells on the Bacillus acidoterrestris medium agar. Results showed that spore populations decreased by 3.0–3.5 log cycles directly after HHP treatment. Subsequently, no significant changes were observed throughout storage regardless of temperature and bacterial strain. However, at 25 °C, an increase of 0.5–1.0 log cycles was noticed. For the remaining vegetative cells, the results illustrated that HHP treatment could eliminate them during storage at 4 and 12 °C, whereas at 25 °C inactivation was strain-dependent. Therefore, temperature-assisted HHP treatment could effectively inactivate A. acidoterrestris spores in orange juice and ensure that the inhibitory effect could be maintained throughout storage at low temperatures.

Thermal treatment alternatives for enzymes inactivation in fruit juices: Recent breakthroughs and advancements

Fruit juices (FJs) are frequently taken owing to their nutritious benefits, appealing flavour, and vibrant colour. The colours of the FJs are critical indicators of the qualitative features that influence the consumer's attention. Although FJs' intrinsic acidity serves as a barrier to bacterial growth, their enzymatic stability remains an issue for their shelf life. Inactivation of enzymes is critical during FJ processing, and selective inactivation is the primary focus of enzyme inactivation. The merchants, on the other hand, want the FJs to stay stable. The most prevalent technique of processing FJ is by conventional heat treatment, which degrades its nutritive value and appearance. The FJ processing industry has undergone a dramatic transformation from thermal treatments to nonthermal treatments (NTTs) during the past two decades to meet the requirements for microbiological and enzymatic stability. The manufacturers want safe and stable FJs, while buyers want high-quality FJs. According to the past investigation, NTTs have the potential to manufacture microbiologically safe and enzymatically stable FJs with low loss of bioactive components. Furthermore, it has been demonstrated that different NTTs combined with or without other NTTs or mild heating as a hurdle technology increase the synergistic effect for microbiological safety and stability of FJs. Concise information about the variables that affect NTTs' action mode has also been addressed. Primary inactivates enzymes by modifying the protein structure and active site conformation. NTTs may increase enzyme activity depending on the nature of the enzyme contained in FJs, the applied pressure, pH, temperature, and treatment period. This is due to the release of membrane-bound enzymes as well as changes in protein structure and active sites that allow substrate interaction. Additionally, the combination of several NTTs as a hurdle technology, as well as temperature and treatment periods, resulted in increased enzyme inactivation in FJs. Therefore, a combination of thermal and non-thermal technologies is suggested to increase the effectiveness of the process as well as preserve the juice quality.

High Hydrostatic Pressure to Increase the Biosynthesis and Extraction of Phenolic Compounds in Food: A Review

Phenolic compounds from fruits and vegetables have shown antioxidant, anticancer, anti-inflammatory, among other beneficial properties for human health. All these benefits have motivated multiple studies about preserving, extracting, and even increasing the concentration of these compounds in foods. A diverse group of vegetable products treated with High Hydrostatic Pressure (HHP) at different pressure and time have shown higher phenolic content than their untreated counterparts. The increments have been associated with an improvement in their extraction from cellular tissues and even with the activation of the biosynthetic pathway for their production. The application of HHP from 500 to 600 MPa, has been shown to cause cell wall disruption facilitating the release of phenolic compounds from cell compartments. HPP treatments ranging from 15 to 100 MPa during 10-20 min at room temperature have produced changes in phenolic biosynthesis with increments up to 155%. This review analyzes the use of HHP as a method to increase the phenolic content in vegetable systems. Phenolic content changes are associated with either an immediate stress response, with a consequent improvement in their extraction from cellular tissues, or a late stress response that activates the biosynthetic pathways of phenolics in plants.

Exploring the Immune-Boosting Functions of Vitamins and Minerals as Nutritional Food Bioactive Compounds: A Comprehensive Review

Food components have long been recognized to play a fundamental role in the growth and development of the human body, conferring protective functionalities against foreign matter that can be severe public health problems. Micronutrients such as vitamins and minerals are essential to the human body, and individuals must meet their daily requirements through dietary sources. Micronutrients act as immunomodulators and protect the host immune response, thus preventing immune evasion by pathogenic organisms. Several experimental investigations have been undertaken to appraise the immunomodulatory functions of vitamins and minerals. Based on these experimental findings, this review describes the immune-boosting functionalities of micronutrients and the mechanisms of action through which these functions are mediated. Deficiencies of vitamins and minerals in plasma concentrations can lead to a reduction in the performance of the immune system functioning, representing a key contributor to unfavorable immunological states. This review provides a descriptive overview of the characteristics of the immune system and the utilization of micronutrients (vitamins and minerals) in preventative strategies designed to reduce morbidity and mortality among patients suffering from immune invasions or autoimmune disorders.

Shelf life extension of strawberry juice by equivalent ultrasound, high pressure, and pulsed electric fields processes

Nonthermal processing technologies have focused on the production of safe, fresh-like and high quality food products very much in line with current consumer demands. It is a high priority to maintain the quality attributes of the food during its shelf life. In this study; microbial stability, physicochemical properties and phytochemical characteristics of strawberry juice (SJ) pasteurized by ultrasonication (US) (55 °C, 0.29 W/mL acoustic energy density, 120 μm amplitude, 3 min), high pressure processing (HPP) (300 MPa, 1 min), and pulsed electric fields (PEF) (35 kV/cm, 27 μs) were evaluated during 42 days of storage at 4 °C in comparison with conventional thermal pasteurization as a reference treatment (72 °C, 15 s). The nonthermal processes were equivalent in terms of E. coli inactivation since the selected processing conditions previously led to almost identical inactivation level (at least 5-log) of inoculated E. coli. Thus, the current study demonstrates how these equivalent US, HPP, and PEF treatments differ from each other in terms of their effect on SJ natural microbiota and quality characteristics during refrigerated storage. Results showed that US, HPP, and heat treatment ensured the microbial stability of SJ for at least 42 days while PEF extended the shelf life of SJ by at least 28 days based on the natural microbiota. No significant difference was found for the total soluble solids of the processed samples (p > 0.05) whereas acidity and pH of the samples varied during the storage period (p < 0.05). Immediately after processing, the total phenolic contents and antioxidant activities of SJ were better retained by HPP and PEF compared to thermal pasteurization. Furthermore, HPP and PEF significantly increased total anthocyanin content of SJ by 15 and 17% with respect to untreated SJ (p < 0.05). Phytochemical characteristics of processed SJ started to decrease after 7 days of storage irrespective of treatment type. HPP treated juices showed significantly higher levels of total anthocyanin and antioxidant activity at the final day of storage. Principal component and cluster analysis showed that the processed SJ samples had higher similarity to the untreated fresh SJ during storage up to 14 days, while the samples beyond this storage period clustered together and discriminated from the rest indicating a decreased similarity to the fresh juice. This study rendered simultaneous evaluation of several quality characteristics during storage of pasteurized strawberry juice based on the equivalent processing approach and multivariate data analysis. Under the selected processing conditions, HPP was the best option to extend the shelf life of SJ and enhance its phytochemical characteristics.

Impact of Innovative Technologies on the Content of Vitamin C and Its Bioavailability from Processed Fruit and Vegetable Products

Nowadays, thermal treatments are used for extending the shelf-life of vegetable and fruit products by inactivating microorganisms and enzymes. On the other hand, heat treatments often induce undesirable changes in the quality of the final product, e.g., losses of nutrients, color alterations, changes in flavor, and smell. Therefore, the food industry is opening up to new technologies that are less aggressive than thermal treatment to avoid the negative effects of thermal pasteurization. Non-thermal processing technologies have been developed during the last decades as an alternative to thermal food preservation. Processing changes the structure of fruit and vegetables, and hence the bioavailability of the nutrients contained in them. In this review, special attention has been devoted to the effects of modern technologies of fruit and vegetable processing, such as minimal processing (MPFV), high-pressure processing (HPP), high-pressure homogenization (HPH), ultrasounds (US), pulsed electric fields (PEF), on the stability and bioavailability of vitamin C.

Traceability in food processing: problems, methods, and performance evaluations-a review

Processed food has become an indispensable part of the human food chain. It provides rich nutrition for human health and satisfies various other requirements for food consumption. However, establishing traceability systems for processed food faces a different set of challenges compared to primary agro-food, because of the variety of raw materials, batch mixing, and resource transformation. In this paper, progress in the traceability of processed food is reviewed. Based on an analysis of the food supply chain and processing stage, the problem of traceability in food processing results from the transformations that the resources go through. Methods to implement traceability in food processing, including physical separation in different lots, defining and associating batches, isotope analysis and DNA tracking, statistical data models, internal traceability system development, artificial intelligence (AI), and blockchain-based approaches are summarized. Traceability is evaluated based on recall effects, TRUs (traceable resource units), and comprehensive granularity. Different methods have different advantages and disadvantages. The combined application of different methods should consider the specific application scenarios in food processing to improve granularity. On the other hand, novel technologies, including batch mixing optimization with AI, quality forecasting with big data, and credible traceability with blockchain, are presented in the context of improving traceability performance in food processing.

Novel Processing Technologies as Compared to Thermal Treatment on the Bioaccessibility and Caco-2 Cell Uptake of Carotenoids from Tomato and Kale-Based Juices

This research aimed to measure the impact of novel food processing techniques, i.e., pulsed electric field (PEF) and ohmic heating (OH), on carotenoid bioaccessibility and Caco-2 cell uptake from tomato juice and high-pressure processing (HPP) and PEF on the same attributes from kale-based juices, as compared with raw (nonprocessed) and conventional thermally treated (TT) juices. Lycopene, β-carotene, and lutein were quantitated in juices and the micelle fraction using high-performance liquid chromatography (HPLC)-diode array detection and in Caco-2 cells using HPLC-tandem mass spectrometry. Tomato juice results were as follows: PEF increased lycopene bioaccessibility (1.5 ± 0.39%) by 150% (P = 0.01) but reduced β-carotene bioaccessibility (28 ± 6.2%) by 44% (P = 0.02), relative to raw juice. All processing methods increased lutein uptake. Kale-based juice results were as follows: TT and PEF degraded β-carotene and lutein in the juice. No difference in bioaccessibility or cell uptake was observed. Total delivery, i.e., the summation of bioaccessibility and cell uptake, of lycopene, β-carotene, and lutein was independent of type of processing. Taken together, PEF and OH enhanced total lycopene and lutein delivery from tomato juice to Caco-2 cells as well as TT, and may produce a more desirable product due to other factors (i.e., conservation of heat-labile micronutrients, fresher organoleptic profile). HPP best conserved the carotenoid content and color of kale-based juice and merits further consideration.

Inactivation of Pichia rhodanensis in relation to membrane and intracellular compounds due to microchip pulsed electric field (MPEF) treatment

The effect of microchip pulsed electric field (MPEF) treatment on lethal and sublethal injury of Pichia rhodanensis (P. rhodanensis) were employed under 100–500 V for 20–100 pulses and the underlying mechanism of MPEF treatment was investigated as well. A 6.48 log₁₀ reduction of P. rhodanensis was achieved at 500V for 80 pulse. The fluorescent staining with Propidium Iodide (PI) verified that the rate of sublethal injury cells maximum up to 27.2% under 200 V. MPEF can cause the damage of cell morphology and ultrastructure, meanwhile causing a decrease in cellular enzymes, antioxidant enzyme activity and cell membrane fluidity. The leakage of intracellular compounds (protein, nucleic acid, K⁺, Mg²⁺) and Ca²⁺-ATPase gradually increased as the growth of voltage, especially the proportion of protein in the supernatants increased from 2.0% to 26.4%. Flow cytometry analysis showed that MPEF has significant effect on membrane potential, but no obvious influence on non-specific esterase. MPEF can cause the changing of the secondary structure of protein, at the same time, double helix structure of DNA became loose and unwinding. These results provide a theoretical guidance for the widespread using of MPEF technology in the application of a non-thermal processing technique for food.

Identification of spoilage microorganisms in blueberry juice and their inactivation by a microchip pulsed electric field system

Blueberry juice is a healthy and nutritious food that has become increasingly popular worldwide. However, little is known about the microbial groups of this juice that can cause its spoilage. This study aimed to identify the main spoilage microorganisms in blueberry juice and explore whether a microchip pulsed electric field (MPEF) can effectively inactivate them. We performed polymerase chain reaction (PCR) amplification, as well as 16S rDNA, 18S rDNA, internal transcribed spacer (ITS), and 26S rDNA gene sequence analyses. Nine species belonging to eight genera, including Pantoea, Burkholderia, Pichia, Meyerozyma, Cryptococcus, Aureobasidium, Cladosporium, and Penicillium were identified as spoilage microorganisms. Cryptococcus sp., Meyerozyma sp., and Pichia sp. were specific spoilage organisms (SSO) owing to their rising numbers throughout spoilage progression. The effect of MPEF on the potential inactivation of these microorganisms was to induce significant inactivation of viable Cryptococcus sp., Meyerozyma sp., and Pichia sp. This research provides a theoretical basis for the application of MPEF in improving the quality of blueberry juice.

Use of emerging technologies in the extraction of lupeol, α-amyrin and β-amyrin from sea grape (Coccoloba uvifera L.)

Emerging technologies are being explored to improve extraction yields of phytochemicals or high-value biological compounds. The aim of this study was to evaluate the extraction of lupeol, α-, and β-amyrin from fruit, leaf and stem of the sea grape tree (Coccoloba uvifera L.) using technologies such as Ultrasound Assisted Extraction (UAE) and High Hydrostatic Pressure Extraction (HHPE). Results were compared to conventional extraction (maceration). Analysis with thin-layer chromatography revealed the presence of lupeol in all studied parts of the tree. Optimal extraction conditions for UAE and HHPE were found; the highest concentration of triterpenes was obtained by UAE after evaluating conventional and non-conventional techniques. Finally, analysis of different tree parts and other vegetable sources showed that the best source of triterpenes was the leaf.

Effect of processing on phenolic antioxidants of fruits, vegetables, and grains--a review

Understanding the influence of processing operations such as drying/dehydration, canning, extrusion, high hydrostatic pressure, pulsed electric field, and ohmic heating on the phytochemicals of fruits, vegetables, and grains is important in retaining the health benefiting properties of these antioxidative compounds in processed food products. Most of the previous investigations in the literature on the antioxidants of fruits, vegetables, and grains have shown that food-processing operations reduced the antioxidants of the processed foods, which is also the usual consumer perception. However, in the last decade some articles in the literature reported that the evaluation of nutritional quality of processed fruits and vegetables not only depend on the quantity of vitamin C but should include analyses of other antioxidant phytochemicals and antioxidant activity. Thermal processing increased the total antioxidant activity of tomato and sweet corn. Most importantly, analysis also depends on the condition, type, and mechanism of antioxidant assays used. This review aims to provide concise information on the influence of various thermal and nonthermal food-processing operations on the stability and kinetics of health beneficial phenolic antioxidants of fruits, vegetables, and grains.

Food matrix and processing influence on carotenoid bioaccessibility and lipophilic antioxidant activity of fruit juice-based beverages

Food matrix and food processing are factors of importance in designing food and beverages with a high content of bioaccessible carotenoids.

Quality-related enzymes in plant-based products: effects of novel food processing technologies part 2: pulsed electric field processing

Pulsed electric field (PEF) processing is an effective technique for the preservation of pumpable food products as it inactivates vegetative microbial cells at ambient to moderate temperature without significantly affecting the nutritional and sensorial quality of the product. However, conflicting views are expressed about the effect of PEF on enzymes. In this review, which is part 2 of a series of reviews dealing with the effectiveness of novel food preservation technologies for controlling enzymes, the scientific literature over the last decade on the effect of PEF on plant enzymes is critically reviewed to shed more light on the issue. The existing evidence indicates that PEF can result in substantial inactivation of most enzymes, although a much more intense process is required compared to microbial inactivation. Depending on the processing condition and the origin of the enzyme, up to 97% inactivation of pectin methylesterase, polyphenol oxidase, and peroxidase as well as no inactivation have been reported following PEF treatment. Both electrochemical effects and Ohmic heating appear to contribute to the observed inactivation, although the relative contribution depends on a number of factors including the origin of the enzyme, the design of the PEF treatment chamber, the processing condition, and the composition of the medium.

Effects of nonthermal preservation technologies on antioxidant activity of fruits and vegetables: A review

Consumer demand for safe and nutritious fruits and vegetables has given rise to the development of a number of nonthermal food preservation techniques. Recent studies have highlighted that antioxidant activity of fruits and vegetables plays an important role in human health. In this paper, the influences of nonthermal preservation technologies, including pulsed electric field, radiation processing, dense phase carbon dioxide, ozone processing, and edible coatings, on the antioxidant capacity and related compounds in fruits and vegetables are reviewed. The proposed mechanisms and future trends are also discussed to accelerate the further commercialization and exploration of these novel technologies, which will, in turn, help to promote human health.

Mind the gap-deficits in our knowledge of aspects impacting the bioavailability of phytochemicals and their metabolites--a position paper focusing on carotenoids and polyphenols

Various secondary plant metabolites or phytochemicals, including polyphenols and carotenoids, have been associated with a variety of health benefits, such as reduced incidence of type 2 diabetes, cardiovascular diseases, and several types of cancer, most likely due to their involvement in ameliorating inflammation and oxidative stress. However, discrepancies exist between their putative effects when comparing observational and intervention studies, especially when using pure compounds. These discrepancies may in part be explained by differences in intake levels and their bioavailability. Prior to exerting their bioactivity, these compounds must be made bioavailable, and considerable differences may arise due to their matrix release, changes during digestion, uptake, metabolism, and biodistribution, even before considering dose- and host-related factors. Though many insights have been gained on factors affecting secondary plant metabolite bioavailability, many gaps still exist in our knowledge. In this position paper, we highlight several major gaps in our understanding of phytochemical bioavailability, including effects of food processing, changes during digestion, involvement of cellular transporters in influx/efflux through the gastrointestinal epithelium, changes during colonic fermentation, and their phase I and phase II metabolism following absorption.