Thermal Inactivation of Microorganisms

Enhancing the Shelf Life of Sous-Vide Red Deer Meat with Piper nigrum Essential Oil: A Study on Antimicrobial Efficacy against Listeria monocytogenes

Using sous-vide technology in combination with essential oils offers the potential to extend the preservation of food items while preserving their original quality. This method aligns with the growing consumer demand for safer and healthier food production practices. This study aimed to assess the suitability of minimal processing of game meat and the effectiveness of vacuum packaging in combination with Piper nigrum essential oil (PNEO) treatment to preserve red deer meat samples inoculated with Listeria monocytogenes. Microbial analyses, including total viable count (TVC) for 48 h at 30 °C, coliform bacteria (CB) for 24 h at 37 °C, and L. monocytogenes count for 24 h at 37 °C, were conducted. The cooking temperature of the sous-vide was from 50 to 65 °C and the cooking time from 5 to 20 min. Additionally, the study monitored the representation of microorganism species identified through mass spectrometry. The microbiological quality of red deer meat processed using the sous-vide method was monitored over 14 days of storage at 4 °C. The results indicated that the TVC, CB, and L. monocytogenes counts decreased with the temperature and processing time of the sous-vide method. The lowest counts of individual microorganism groups were observed in samples treated with 1% PNEO. The analysis revealed that PNEO, in combination with the sous-vide method, effectively reduced L. monocytogenes counts and extended the shelf life of red deer meat. Kocuria salsicia, Pseudomonas taetrolens, and Pseudomonas fragi were the most frequently isolated microorganism species during the 14-day period of red deer meat storage prepared using the sous-vide method.

Evaluation of alternative methods of tunnel composting (submitted by the European Composting Network) II

Two alternative methods for producing compost in a tunnel, from certain category (Cat.) 3 animal by-products (ABP) and other non-ABP material, were assessed. The first method proposed a minimum temperature of 55°C for 72 h and the second 60°C for 48 h, both with a maximum particle size of 200 mm. The assessment of the Panel on Biological Hazards (BIOHAZ) exclusively focused on Cat. 3 ABP materials (catering waste and processed foodstuffs of animal origin no longer intended for human consumption). The proposed composting processes were evaluated for their efficacy to achieve a reduction of at least 5 log10 of Enterococcus faecalis and Salmonella Senftenberg (775W, H2S negative) and at least 3 log10 of relevant thermoresistant viruses. The applicant provided a list of biological hazards that may enter the composting process and selected parvoviruses as the indicator of the thermoresistant viruses. The evidence provided by the applicant included: (a) literature data on thermal inactivation of biological hazards; (b) results from validation studies on the reduction of E. faecalis, Salmonella Senftenberg 775W H2S negative and canine parvovirus carried out in composting plants across Europe; (c) and experimental data from direct measurements of reduction of infectivity of murine parvovirus in compost material applying the time/temperature conditions of the two alternative methods. The evidence provided showed the capacity of the proposed alternative methods to reduce E. faecalis and Salmonella Senftenberg 775W H2S negative by at least 5 log10, and parvoviruses by at least 3 log10. The BIOHAZ Panel concluded that the two alternative methods under assessment can be considered to be equivalent to the processing method currently approved in the Commission Regulation (EU) No 142/2011.

Thermal inactivation kinetics of Listeria monocytogenes in milk under isothermal and dynamic conditions

Thermal processing is a widely used method to ensure the microbiological safety of milk. Predictive microbiology plays a crucial role in quantifying microbial growth and decline, providing valuable guidance on the design and optimization of food processing operations. This study aimed to investigate the thermal inactivation kinetics of Listeria monocytogenes in milk under both isothermal and dynamic conditions. The thermal inactivation of L. monocytogenes was conducted under isothermal and non-isothermal conditions in sterilized and pasteurized milk, with and without background microbiota, respectively. Furthermore, a secondary model was developed between the shoulder effect and temperature, which was then integrated into the dynamic model. The results showed that L. monocytogenes grown in Tryptic Soy Yeast Extract Broth (TSBYE) prior to thermal inactivation exhibited higher heat resistance compared to cells grown in sterilized milk at isothermal temperatures of 60.0, 62.5, and 65℃. Moreover, the presence of background microbiota in milk significantly enhanced the heat resistance of L. monocytogenes, as evidenced by the increased D-values from 1.13 min to 2.34 min, from 0.46 min to 0.53 min, and from 0.25 min to 0.34 min at 60.0, 62.5, and 65 °C, respectively, regardless of whether the background microbiota was inactivated after co-growth or co-inactivated with L. monocytogenes. For non-isothermal inactivation, the one-step dynamic model based on the log-linear with shoulder model effectively described the microbial inactivation curve and exhibited satisfactory model performance. The model developed contributes to improved risk assessment, enabling dairy processors to optimize thermal treatment and ensure microbiological safety.

Comparative Analysis of Growth, Survival, and Virulence Characteristics of Listeria monocytogenes Isolated from Imported Meat

Listeria monocytogenes is an important foodborne pathogen with worldwide prevalence. Understanding the variability in the potential pathogenicity among strains of different subtypes is crucial for risk assessment. In this study, the growth, survival, and virulence characteristics of 16 L. monocytogenes strains isolated from imported meat in China (2018-2020) were investigated. The maximum specific growth rate (μmax) and lag phase (λ) were evaluated using the time-to-detection (TTD) method and the Baranyi model at different temperatures (25, 30, and 37 °C). Survival characteristics were determined by D-values and population reduction after exposure to heat (60, 62.5, and 65 °C) and acid (HCl, pH = 2.5, 3.5, and 4.5). The potential virulence was evaluated via adhesion and invasion to Caco-2 cells, motility, and lethality to Galleria mellonella. The potential pathogenicity was compared among strains of different lineages and subtypes. The results indicate that the lineage I strains exhibited a higher growth rate than the lineage II strains at three growth temperatures, particularly serotype 4b within lineage I. At all temperatures tested, serotypes 1/2a and 1/2b consistently demonstrated higher heat resistance than the other subtypes. No significant differences in the log reduction were observed between the lineage I and lineage II strains at pH 2.5, 3.5, and 4.5. However, the serotype 1/2c strains exhibited significantly low acid resistance at pH 2.5. In terms of virulence, the lineage I strains outperformed the lineage II strains. The invasion rate to Caco-2 cells and lethality to G. mellonella exhibited by the serotype 4b strains were higher than those observed in the other serotypes. This study provides meaningful insights into the growth, survival, and virulence of L. monocytogenes, offering valuable information for understanding the correlation between the pathogenicity and subtypes of L. monocytogenes.

Thermal Inactivation of Escherichia Phage OSYSP and Host Strain Escherichia coli O157:H7 EDL933: A Comparative Kinetic Analysis

Lytic bacteriophages are promising biocontrol agents against pathogenic bacteria for food and therapeutic applications. Investigating the feasibility of combining phage and physical lethal agents, such as heat, as an effective hurdle combination could lead to beneficial applications. The current research was initiated to compare the thermal inactivation kinetics of a lytic phage (Escherichia phage OSYSP) and its host (Shiga toxin-producing Escherichia coli O157:H7 EDL933), considering they have different critical thermal targets in their structures. To provide a basis for comparison, thermal inactivation kinetics were determined on suspensions of these agents in buffered peptone water using a thermally controlled circulating water bath. Results showed that the bacteriophage virions have a remarkable heat resistance (p < 0.05) compared to their host cells. The D-values of the populations of phage (PFU/mL) and EDL933 strain (CFU/mL) were 166.7 and 7.3 min at 55°C, compared to 44.4 and 0.3 min at 60°C, respectively. Additionally, D-values were significantly (p < 0.05) more influenced by temperature changes in the case of E. coli O157:H7 EDL933 (z-value 3.7°C) compared to that for phage OSYSP (z-value 7.7°C). When the phage suspension was heat-treated in a thermal cycler instead of a water bath, no significant differences between the two treatment procedures (p > 0.05) in estimating virus D- and z-values were observed. Based on these findings, it may be feasible to combine phage OSYSP with mild heat during processing of food to selectively inactivate E. coli O157:H7 EDL933 and subsequently maintain product safety during storage by the surviving phage population; however, the feasibility of this application needs to be investigated. Additionally, the relatively heat-resistant phage OSYSP could qualify as a biological indicator to validate thermal treatments of minimally processed foods in which E. coli O157:H7 EDL933 is the pathogen-of-concern.

Effects of ionizing radiation on organic volatile compounds from PEA protein isolate

Food irradiation is a preservation technique and in respect with regulations, is applied to a limited number of products. Nevertheless, this technique could be interesting for products sensitive to heat treatment, and to limit alteration caused to their organoleptic characteristics. This study concerns the potential of ionization for vegetable proteins, to limit the damage on the sensory properties that can be caused by thermal treatments. The impact of β-ionizing was measured on the volatile compounds of five pea protein isolates. These isolates were subjected to ionizing radiation of 10 MeV electron beam and the volatile compounds were compared by SPME-GC-MS before and after the treatment. β-Ionization led to a major increase in the total amount of volatiles and to appearance of new compounds. We observed a strong increase in aldehydes, that were reported to be involved in pea off-flavor, and the appearance of dimethyl-disulfide, linked to sulfurous off-notes. Many of the compounds impacted by the treatment were linked to protein and lipid oxidations. Mechanisms explaining the impact of β-ionizing on lipids and protein oxidations were proposed.

Exploring the impact of oral bacteria remnants on stem cells from the Apical papilla: mineralization potential and inflammatory response

Introduction

Bacterial persistence is considered one of the main causal factors for regenerative endodontic treatment (RET) failure in immature permanent teeth. This interference is claimed to be caused by the interaction of bacteria that reside in the root canal with the stem cells that are one of the essentials for RET. The aim of the study was to investigate whether prolonged exposure of stem cells from the apical papilla (SCAP) to bacterial remnants of Fusobacterium nucleatum, Actinomyces gerensceriae, Slackia exigua, Enterococcus faecalis, Peptostreptococcaceae yurii, commonly found in infected traumatized root canals, and the probiotic bacteria Lactobacillus gasseri and Limosilactobacillus reuteri, can alter SCAP's inflammatory response and mineralization potential.

Methods

To assess the effect of bacterial remnants on SCAP, we used UV-C-inactivated bacteria (as cell wall-associated virulence factors) and bacterial DNA. Histochemical staining using Osteoimage Mineralization Assay and Alizarin Red analysis was performed to study SCAP mineralization, while inflammatory and osteo/odontogenic-related responses of SCAPs were assessed with Multiplex ELISA.

Results

We showed that mineralization promotion was greater with UV C-inactivated bacteria compared to bacterial DNA. Immunofluorescence analysis detected that the early mineralization marker alkaline phosphatase (ALP) was increased by the level of E. coli lipopolysaccharide (LPS) positive control in the case of UV-C-inactivated bacteria; meanwhile, DNA treatment decreased the level of ALP compared to the positive control. SCAP's secretome assessed with Multiplex ELISA showed the upregulation of pro-inflammatory factors IL-6, IL-8, GM-CSF, IL-1b, neurotrophic factor BDNF, and angiogenic factor VEGF, induced by UV-C-killed bacteria.

Discussion

The results suggest that long term stimulation (for 21 days) of SCAP with UV-C-inactivated bacteria stimulate their mineralization and inflammatory response, while DNA influence has no such effect, which opens up new ideas about the nature of RET failure.

Disentangling the contributions of initial heterogeneities and dynamic stress adaptation to nonlinearities in bacterial survival curves

The deviations from log-linearity that are often observed in bacterial survivor curves can be explained using different arguments, both biological and experimental. In this study, we used Bacillus subtilis as a model organism to demonstrate that the generally accepted vitalistic arguments (initial heterogeneities in the stress resistance of the cells in the population) may fail to describe microbial inactivation in some situations. In this sense, we showed how dynamic stress acclimation during an isothermal treatment provides an alternative explanation for survivor curves with an upwards curvature. We also provided an innovative experimental approach based on preadaptation experiments to evaluate which hypothesis is more suitable for the bacterial response. Furthermore, we used our experimental results to define bounds for the possible stress acclimation that may take place during dynamic treatments, concluding that the magnitude of stress acclimation may be larger for dynamic treatments than for isothermal experiments. We also evaluated the contribution of the SigB general stress response system to heat resistance by comparing the heat survival of wt and the ΔsigB mutant. Both strains survived better in 51, 52.5 and 55 °C when cells were pre-adapted at 48 °C than non-pre-adapted cells. However, ΔsigB was less resistant to heat than wt due to the missing SigB general stress system. Although these conclusions were based on B. subtilis as a model organism, this study can be the first step towards the development of a novel methodology able to estimate dynamic effects using only isothermal experiments. This would improve the models developed within the predictive microbiology community, improving our ability to predict microbial inactivation during industrial treatments, which are most often dynamic.

Validation of High-Pressure Homogenization Process to Pasteurize Brazil Nut (Bertholletia excelsa) Beverages: Sensorial and Quality Characteristics during Cold Storage

The effect of high-pressure homogenization (HPH) on the inactivation of Escherichia coli and the stability of the quality properties of Brazil nut beverages were studied. E. coli was used as target microorganism to validate the HPH process (pressures from 50 to 180 MPa and inlet temperatures (Ti) from 25 to 75 °C). Cold storage (5 °C) for 21 days was conducted to establish the shelf-life of BN beverages, in terms of their microbiological, physical, physicochemical, and sensorial stability. HPH-treated samples were compared to pasteurized BN beverages (63 °C for 20 min). The combination of Ti and the pressure of the HPH process (50 to 150 MPa/75 °C and 180 MPa/25 °C) had a significant effect on E. coli inactivation (8.2 log CFU/mL). During storage at 5 °C, the growth of mesophilic aerobes in processed BN beverages was controlled by the HPH process. Oxidative stability (TBAR assay) and physicochemical properties (pH, acidity, and °Brix) were evaluated during cold storage, showing good stability. Additionally, HPH-treated beverages showed a reduction in their particle size and the formation of more stable protein aggregates, which favored the beverages’ whiteness (color). The HPH process could be an alternative to pasteurization to obtain Brazil nut beverages with an acceptable microbiological shelf life (≥21 days at 5 °C) and high-quality characteristics without the use of any additives.

Sublethally injured microorganisms in food processing and preservation: Quantification, formation, detection, resuscitation and adaption

Sublethally injured state has been recognized as a survival strategy for microorganisms suffering from stressful environments. Injured cells fail to grow on selective media but can normally grow on nonselective media. Numerous microorganism species can form sublethal injury in various food matrices during processing and preservation with different techniques. Injury rate was commonly used to evaluate sublethal injury, but mathematical models for the quantification and interpretation of sublethally injured microbial cells still require further study. Injured cells can repair themselves and regain viability on selective media under favorable conditions when stress is removed. Conventional culture methods might underestimate microbial counts or present a false negative result due to the presence of injured cells. Although the structural and functional components may be affected, the injured cells pose a great threat to food safety. This work comprehensively reviewed the quantification, formation, detection, resuscitation and adaption of sublethally injured microbial cells. Food processing techniques, microbial species, strains and food matrix all significantly affect the formation of sublethally injured cells. Culture-based methods, molecular biological methods, fluorescent staining and infrared spectroscopy have been developed to detect the injured cells. Cell membrane is often repaired first during resuscitation of injured cells, meanwhile, temperature, pH, media and additives remarkably influence the resuscitation. The adaption of injured cells negatively affects the microbial inactivation during food processing.

The importance of what we cannot observe: Experimental limitations as a source of bias for meta-regression models in predictive microbiology

Meta-regression models have gained in popularity during the last years as a way to create more generic models for Microbial Risk Assessments that also include variability. However, as with most meta-analyses and empirical models, systematic biases in the data can result in inaccurate models. In this article, we define experimental bias as a type of selection bias due to the practical limitations of microbial inactivation experiments. Conditions with extremely high D-values (i.e. slow inactivation) need very long experimental runs to cause significant reductions. On the other hand, when the D-value is extremely low, not enough data points can be gathered before the microbial population is below the detection limit. Consequently, experimental designs favour conditions within a practical experimental range, introducing a selection bias in the D-values. We demonstrate the impact of experimental bias in meta-regression models using numerical simulations. Models fitted to data with experimental bias overestimated the z-value and underestimated variability. We propose a rapid heuristic method to identify experimental bias in datasets, and we propose truncated regression to mitigate its impact in meta-regression models. Both methods were validated using simulated data. Thereafter the procedures were tested by building a meta-regression model for actual data for the inactivation of Bacillus cereus spores. We concluded that the dataset included experimental bias, and that it would cause an overestimation of the microbial resistance at high temperatures (>120 °C) for classical meta-regression models. This effect was mitigated when the model was built using truncated regression. In conclusion, we demonstrate that experimental bias could potentially result in inaccurate models for predictive microbiology. Therefore, checking for experimental bias should be a routine step in meta-regression modelling, and be included in guidelines on data analysis for meta-regression.

Hurdle Technology Approach to Control Listeria monocytogenes Using Rhamnolipid Biosurfactant

This study evaluates the combination of mild heat with a natural surfactant for the inactivation of L. monocytogenes Scott A in low-water-activity (a_w) model systems. Glycerol or NaCl was used to reduce the a_w to 0.92, and different concentrations of rhamnolipid (RL) biosurfactant were added before heat treatment (60 °C, 5 min). Using glycerol, RL treatment (50-250 µg/mL) reduced bacterial population by less than 0.2 log and heat treatment up to 1.5 log, while the combination of both hurdles reached around 5.0 log reduction. In the NaCl medium, RL treatment displayed higher inactivation than in the glycerol medium at the same a_w level and a larger synergistic lethal effect when combined with heat, achieving ≥ 6.0 log reduction at 10-250 µg/mL RL concentrations. The growth inhibition activity of RL was enhanced by the presence of the monovalent salts NaCl and KCl, reducing MIC values from >2500 µg/mL (without salt) to 39 µg/mL (with 7.5% salt). The enhanced antimicrobial activity of RL promoted by the presence of salts was shown to be pH-dependent and more effective under neutral conditions. Overall, results demonstrate that RL can be exploited to design novel strategies based on hurdle approaches aiming to control L. monocytogenes.

Methods to Study TLRs in Transplantation

Toll-like receptors (TLRs) are key regulators of immune responses, including alloimmune responses. In this chapter, we present protocols to study whether and/or how TLRs can contribute to solid-organ transplant rejection. We describe methods to reduce heterogeneity in microbiome variations between animals before beginning experiments to limit confounding factors, protocols using TLR agonists to prevent anti-CD154/donor splenocyte transfer-mediated tolerance, and recipes to heat-kill microbes or use hosts genetically deficient in TLR-dependent pathways to distinguish between TLR-dependent and live bacteria-dependent effects.

The probability of bacterial spores surviving a thermal process: The 12D myth and other issues with its quantitative assessment

The concepts of "D-value," "thermal death time" and "commercial sterility," innovative and useful at their inception, are based on untenable assumptions, notably that the log-linear isothermal inactivation model has universal applicability, that extrapolation over several orders of magnitude below the detection level is permissible, and that total microbial inactivation is theoretically impossible. Almost all commonly observed inactivation patterns, the log-linear is just a special case, can be described by both deterministic and fully stochastic models, examples of which are given. Unlike the deterministic, the stochastic models predict either complete elimination of the targeted cells or spores in realistic finite time, or residual survival. In most cases, the published survival data do not contain enough information to establish which actually happens. The microbial safety of thermally processed foods can be compromised not only by under-processing but also by a variety of mishaps whose occurrence probabilities are unrelated to the inactivation kinetics. Moreover, the available sampling plans to detect microbial contamination in sterilized containers through incubation alone are insensitive to levels of potential safety concerns. In principle, many of these issues could be resolved by developing new dramatically improved detection methods and/or verifiable methods to predict very low levels of microbial survival.

Effect of Lactose and Milk Protein on Thermal Resistance of Enterococcus faecium NRRL B-2354 and Salmonella in Dairy Powders

ABSTRACT

Microbial challenge studies using nonpathogenic surrogates provide a practical means for validating thermally based pathogen controls for low-moisture foods. Because the relative thermal resistance, or kill ratio, of Enterococcus faecium NRRL B-2354 (a nonpathogenic surrogate) to Salmonella is greatly influenced by food composition, this study assessed relative thermal resistance of a five-strain Salmonella cocktail and E. faecium in skim milk powder (SMP), lactose-free skim milk powder (LSMP), 90% milk protein isolate (MPI), and lactose powder (LP). The impact of sugar composition (lactose versus glucose-galactose) on resuscitation of bacterial survivors, by using SMP and LSMP, was also determined. Dairy powders were inoculated with agar-grown cultures, mixed, preequilibrated at 0.25 water activity (aw), ground to achieve homogeneity, reequilibrated, and subjected to isothermal treatment. After enumeration on nonselective differential media, log-linear and Bigelow models were fit to the survivor data via one-step global regression. The aw changes and glass transition temperature were assessed at elevated temperatures by using uninoculated, equilibrated powder samples. Estimated D90°C-values were approximately two times higher for E. faecium (P < 0.05) than for Salmonella in SMP, LP, and MPI, but statistically similar (P > 0.05) in LSMP. Addition of sugars to recovery media did not influence survivor resuscitation from heat-treated SMP and LSMP, confirming that microbial inactivation was impacted primarily by the thermal treatment, not the recovery step. Thermally induced changes in aw were seen only for LP and MPI, with the glass transition temperature observed only for SMP and MPI. In conclusion, rather than always requiring greater lethality of E. faecium than Salmonella, these findings suggest that sufficient pathogen controls for low-moisture foods can also be validated by thoroughly documenting the appropriate kill ratios of E. faecium to Salmonella.

HIGHLIGHTS

Development of On-Demand Antiviral Electrostatic Precipitators with Electrothermal-Based Antiviral Surfaces against Airborne Virus Particles

Particulate matter, including airborne pathogens, is of particular concern because it can cause the spread of diseases through aerosol transmission. In this study, a new concept is proposed: on-demand antiviral electrostatic precipitators (ESPs) with electrothermal-based antiviral surfaces. We applied electrothermal-based antiviral surfaces to air-purifying applications and demonstrated that the proposed method is effective with regard to collecting airborne virus particles on collection plates in a two-stage ESP. With alternating current power, MS2 bacteriophage and H1N1 viruses were completely deactivated after exposure to 50 °C for 30 min. This remarkable antiviral performance via electrothermal effects indicates that on-demand platforms for self-antiviral surfaces can perform sterilization immediately without generating secondary pollutants, thus effectively preventing the spread of infectious microorganisms in public places. We believe that the results of this study can provide useful guidelines for the design and realization of practical and wearable devices for antiviral air-purifying applications.

Natural sources and encapsulating materials for probiotics delivery systems: Recent applications and challenges in functional food development

Probiotics are known as the live microorganisms which upon adequate administration elicit a health beneficial response inside the host by decreasing the luminal pH, eliminating the pathogenic bacteria in the gut as well as producing short chain fatty acids (SCFA). With advancements in research; probiotics have been explored as potential ingredients in foods. However, their use and applications in food industry have been limited due to restrictions of maintaining the viability of probiotic cells and targeting the successful delivery to gut. Encapsulation techniques have significant influence on increasing the viability rates of probiotic cells with the successful delivery of cells to the target site. Moreover, encapsulating techniques also prevent the live cells from harsh physiological conditions of gut. This review discusses several encapsulating techniques as well as materials derived from natural sources and nutraceutical compounds. In addition to this, this paper also comprehensively discusses the factors affecting the probiotics viability and evaluation of successful release and survival of probiotics under simulated gastric, intestinal conditions as well as bile, acid tolerant conditions. Lastly applications and challenges of using encapsulated bacteria in food industry for the development of novel functional foods have also been discussed in detail too. Future studies must include investigating the use of encapsulated bacterial formulations in in-vivo models for effective health beneficial properties as well as exploring the mechanisms behind the successful release of these formulations in gut, hence helping us to understand the encapsulation of probiotic cells in a meticulous manner.

A microfluidic-based analysis of 3D macrophage migration after stimulation by Mycobacterium, Salmonella and Escherichia

Macrophages play an essential role in the process of recognition and containment of microbial infections. These immune cells are recruited to infectious sites to reach and phagocytose pathogens. Specifically, in this article, bacteria from the genus Mycobacterium, Salmonella and Escherichia, were selected to study the directional macrophage movement towards different bacterial fractions. We recreated a three-dimensional environment in a microfluidic device, using a collagen-based hydrogel that simulates the mechanical microarchitecture associated to the Extra Cellular Matrix (ECM). First, we showed that macrophage migration is affected by the collagen concentration of their environment, migrating greater distances at higher velocities with decreasing collagen concentrations. To recreate the infectious microenvironment, macrophages were exposed to lateral gradients of bacterial fractions obtained from the intracellular pathogens M. tuberculosis and S. typhimurium. Our results showed that macrophages migrated directionally, and in a concentration-dependent manner, towards the sites where bacterial fractions are located, suggesting the presence of attractants molecules in all the samples. We confirmed that purified M. tuberculosis antigens, as ESAT-6 and CFP-10, stimulated macrophage recruitment in our device. Finally, we also observed that macrophages migrate towards fractions from non-pathogenic bacteria, such as M. smegmatis and Escherichia coli. In conclusion, our microfluidic device is a useful tool which opens new perspectives to study the recognition of specific antigens by innate immune cells.

The Most Probable Curve method - A robust approach to estimate kinetic models from low plate count data resulting in reduced uncertainty

A novel method is proposed for fitting microbial inactivation models to data on liquid media: the Most Probable Curve (MPC) method. It is a multilevel model that makes a separation between the "true" microbial concentration according to the model, the "actual" concentration in the media considering chance, and the actual counts on the plate. It is based on the assumptions that stress resistance is homogeneous within a microbial population, and that there is no aggregation of microbial cells. Under these assumptions, the number of colonies in/on a plate follows a Poisson distribution with expected value depending on the proposed kinetic model, the number of dilutions and the plated volume. The novel method is compared against (non)linear regression based on a normal likelihood distribution (traditional method), Poisson regression and gamma-Poisson regression using data on the inactivation of Listeria monocytogenes. The conclusion is that the traditional method has limitations when the data includes plates with low (or zero) cell counts, which can be mitigated using more complex (discrete) likelihoods. However, Poisson regression uses an unrealistic likelihood function, making it unsuitable for survivor curves with several log-reductions. Gamma-Poisson regression uses a more realistic likelihood function, even though it is based mostly on empirical hypotheses. We conclude that the MPC method can be used reliably, especially when the data includes plates with low or zero counts. Furthermore, it generates a more realistic description of uncertainty, integrating the contribution of the plating error and reducing the uncertainty of the primary model parameters. Consequently, although it increases modelling complexity, the MPC method can be of great interest in predictive microbiology, especially in studies focused on variability analysis.

Bioluminescent test systems based on firefly luciferase for studying stress effects on living cells

The bioluminescent luciferin-luciferase reaction is based on the oxidation of D-luciferin by oxygen in the presence of ATP and magnesium ions, catalyzed by firefly luciferase. The possibilities of using this reaction to study the influence of external effectors of a physical and chemical nature (temperature exposure, additions of drugs, membrane-active compounds, etc.) on living cells (prokaryotes and eukaryotes) are considered. Examples of the use of test systems based on living cells producing thermostable firefly luciferase for monitoring cellular homeostasis are given. The study of the kinetics of changes in the concentration of ATP and luciferase inside and outside cells made it possible to determine in dynamics the metabolic activity, cytotoxicity, and survival of cells under conditions of cellular stress, to study the processes of ATP synthesis/hydrolysis, and to evaluate the effectiveness of lytic agents in changing the permeability of the cell membrane.

Superheated steam effectively inactivates diverse microbial targets despite mediating effects from food matrices in bench-scale assessments

Sanitation in dry food processing environments is challenging due to the exclusion of water. Superheated steam (SHS) is a novel sanitation technique that utilizes high temperature steam to inactivate microorganisms. The high sensible heat of SHS prevents condensation on surfaces. Here we evaluated SHS thermal inactivation of various vegetative and spore forming bacteria and fungi and determined the effect of food matrix composition on SHS efficacy. Capillary tubes with vegetative cells (Salmonella, E. coli O157:H7, Listeria monocytogenes, or Enterococcus faecium), Aspergillus fischeri ascospores, or B. cereus spores (100 μL) were SHS treated at 135 ± 1 °C for 1 or 2 s. After 1 s, SHS achieved a reduction of 10.91 ± 0.63 log₁₀ CFU/mL for vegetative cells, 2.09 ± 0.58 log₁₀ ascospores/mL for A. fischeri, and 0.21 ± 0.10 log₁₀ spores/mL for B. cereus. SHS treatment achieved significant reductions in vegetative cells and fungal ascospores (p < 0.05), however B. cereus spores were not significantly reduced after 2 s and were determined to be the most resistant of the cell types evaluated. Consequently, peanut butter compositions (peanut powder, oil, and water) and milk powder (whole and nonfat) inoculated with B. cereus spores on aluminum foil coupons (2 × 3 × 0.5 cm) were tested. The D_161°C values for B. cereus spores ranged from 46.53 ± 4.48 s (6 % fat, 55 % moisture, a_w: 0.927) to 79.21 ± 14.87 s (43 % fat, 10 % moisture, a_w: 0.771) for various peanut butter compositions. Whole milk powder had higher D_161°C (34.38 ± 20.90 s) than nonfat milk powder (24.73 ± 6.78 s). SHS (135 ± 1 °C) rapidly (1 s) inactivated most common vegetative bacterial cells; however B. cereus spores were more heat resistant. B. cereus spore inactivation was significantly affected by product composition (p < 0.05). Compared to the log-linear model (R² 0.81-0.97), the Weibull model had better fit (R² 0.94-0.99). Finally, the ease of peanut butter removal from surfaces increased while the ease of non-fat dry milk removal decreased with the increasing SHS treatment duration. However, allergen residues were detectable on surfaces regardless of SHS treatment. The findings from this study can inform the development of pilot-scale research on SHS.

Evaluation of distinct modes of oxidative secondary injury generated in heat-treated cells of Escherichia coli with solid/liquid and complex/semi-synthetic media sets

AIMS

To characterize and evaluate oxidative secondary injury generated in heat-treated Escherichia coli cells during recovery cultivation either on agar or in a broth of a semi-synthetic enriched M9 (EM9) medium and a complex Luria broth (LB) medium with different types of antioxidants.

METHODS AND RESULTS

E. coli cells grown in the EM9 and LB broth were heated at 50^o C in a buffer (pH7.0). Heated cells were recovered on the same kind of agar medium as that used for growth, with or without different antioxidants. Although these antioxidants mostly protected the cells from oxidative secondary injury on the recovery media, sodium thiosulfate and sodium pyruvate were most protective on EM9 and LB agars, respectively. Determination of viability using the most probable number and growth delay analysis methods showed significant reductions in the protective effects of antioxidants in the EM9 and LB media.

CONCLUSION

Oxidative secondary injury generated in heated E. coli cells was found to be qualitatively and quantitatively diverse under cellular and environmental conditions.

SIGNIFICANCE AND IMPACT OF THE STUDY

Our results suggest that different modes of oxidation should be considered in viability determination and injured cell enumeration of heat-treated cells.

Terahertz thermal curve analysis for label-free identification of pathogens

In this study, we perform a thermal curve analysis with terahertz (THz) metamaterials to develop a label-free identification tool for pathogens such as bacteria and yeasts. The resonant frequency of the metasensor coated with a bacterial layer changes as a function of temperature; this provides a unique fingerprint specific to the individual microbial species without the use of fluorescent dyes and antibodies. Differential thermal curves obtained from the temperature-dependent resonance exhibit the peaks consistent with bacterial phases, such as growth, thermal inactivation, DNA denaturation, and cell wall destruction. In addition, we can distinguish gram-negative bacteria from gram-positive bacteria which show strong peaks in the temperature range of cell wall destruction. Finally, we perform THz melting curve analysis on the mixture of bacterial species in which the pathogenic bacteria are successfully distinguished from each other, which is essential for practical clinical and environmental applications such as in blood culture.

A label-free sensing method has been developed for identifying hazardous pathogens based on their intrinsic properties. This was possible by interrogating the temperature-dependent dielectric constant of the microbes in the far-infrared range.

Combined antimicrobial effect of bacteriocins with other hurdles of physicochemic and microbiome to prolong shelf life of food: A review

Bacteriocins are ribosomally synthesized peptides to inhibit food spoilage bacteria, which are widely used as a kind of food biopreservation. The role of bacteriocins in therapeutics and food industries has received increasing attention across a number of disciplines in recent years. Despite their advantages as alternative therapeutics over existing strategies, the application of bacteriocins suffers from shortcomings such as the high isolation and purification cost, narrow spectrum of activity, low stability and solubility and easy enzymatic degradation. Previous studies have studied the synergistic or additive effects of bacteriocins when used in combination with other hurdles including physics, chemicals, and microbes. These combined treatments reduce the adverse effects of chemical additives, extending the shelf life of food products while guaranteeing food quality. This review highlights the advantages and disadvantages of bacteriocins in food preservation. It then reviews the combined effect and mechanism of different hurdles and bacteriocins in enhancing food preservation in detail. The combination of bacterioncins and other hurdles provide potential approaches for maintaining food quality and food safety.

Listeria monocytogenes - How This Pathogen Survives in Food-Production Environments?

The foodborne pathogen Listeria monocytogenes is the causative agent of human listeriosis, a severe disease, especially dangerous for the elderly, pregnant women, and newborns. Although this infection is comparatively rare, it is often associated with a significant mortality rate of 20-30% worldwide. Therefore, this microorganism has an important impact on food safety. L. monocytogenes can adapt, survive and even grow over a wide range of food production environmental stress conditions such as temperatures, low and high pH, high salt concentration, ultraviolet lights, presence of biocides and heavy metals. Furthermore, this bacterium is also able to form biofilm structures on a variety of surfaces in food production environments which makes it difficult to remove and allows it to persist for a long time. This increases the risk of contamination of food production facilities and finally foods. The present review focuses on the key issues related to the molecular mechanisms of the pathogen survival and adaptation to adverse environmental conditions. Knowledge and understanding of the L. monocytogenes adaptation approaches to environmental stress factors will have a significant influence on the development of new, efficient, and cost-effective methods of the pathogen control in the food industry, which is critical to ensure food production safety.

Heat activation and inactivation of bacterial spores. Is there an overlap?

Heat activation at a sublethal temperature is widely applied to promote Bacillus species spore germination. This treatment also has potential to be employed in food processing to eliminate undesired bacterial spores by enhancing their germination, and then inactivating the less heat resistant germinated spores at a milder temperature. However, incorrect heat treatment could also generate heat damage in spores, and lead to more heterogeneous spore germination. Here, the heat activation and heat damage profile of Bacillus subtilis spores was determined by testing spore germination and outgrowth at both population and single spore levels. The heat treatments used were 40-80°C, and for 0-300 min. The results were as follows. 1) Heat activation at 40-70°C promoted L-valine and L-asparagine-glucose-fructose-potassium (AGFK) induced germination in a time dependent manner. 2) The optimal heat activation temperatures for AGFK and L-valine germination via the GerB plus GerK or GerA germinant receptors were 65 and 50-65°C, respectively. 3) Heat inactivation of dormant spores appeared at 70°C, and the heat damage of molecules essential for germination and growth began at 70 and 65°C, respectively. 4) Heat treatment at 75°C resulted in both activation of germination and damage to the germination apparatus, and 80°C treatment caused more pronounced heat damage. 5) For the spores that should withstand adverse environmental temperatures in nature, heat activation seems functional for a subsequent optimal germination process, while heat damage affected both germination and outgrowth. Importance Bacterial spores are thermal resistant structures that can thus survive preservation strategies and revive through the process of spore germination. The more heat resistant spores are the more heterogeneous they germinate upon adding germinants. Upon germination spores can cause food spoilage and cause food intoxication. Here we provide new information on both heat activation and inactivation regimes and their effects on the (heterogeneity of) spore germination.

Inactivation of Murine Norovirus Suspended in Organic Matter Simulating Actual Conditions of Viral Contamination

Foodborne viral illnesses are frequent worldwide and costly for the society. Human norovirus is one of the most common causal agents. Although some norovirus genotypes can now be cultured, surrogates are still used for inactivation studies. The aim of this study was to evaluate the effects of different organic loads individually (artificial feces, real fecal matter, ASTM tripartite organic load, fetal bovine serum) on the efficacy of three highly used sanitization treatments (thermal inactivation, peracetic acid and sodium hypochlorite treatment) using murine norovirus 3 in solutions and surfaces. Based on plaque-forming units, we show that organic matter protects murine norovirus 3 against thermal inactivation (viral reduction of ~ 1 log compared to 2.67 with PBS). However, there was a low-level but significant protection against peracetic acid (viral reduction of ~ 2 log compared to 2.85 with PBS) and none in the presence of sodium hypochlorite. Our study showed that the tested organic matters do not behave similarly depending on the treatments, especially with heat treatments, which showed a higher protection. Furthermore, Feclone ™ artificial feces mimicked some aspect of real fecal matter and may be used instead. Our results will be helpful to researchers undertaking viral inactivation studies in which an organic matrix is used to simulate actual conditions of human norovirus environment.

Exploring Reusability of Disposable Face Masks: Effects of Disinfection Methods on Filtration Efficiency, Breathability, and Fluid Resistance

To curb the spread of the COVID-19 virus, the use of face masks such as disposable surgical masks and N95 respirators is being encouraged and even enforced in some countries. The widespread use of masks has resulted in global shortages and individuals are reusing them. This calls for proper disinfection of the masks while retaining their protective capability. In this study, the killing efficiency of ultraviolet-C (UV-C) irradiation, dry heat, and steam sterilization against bacteria (Staphylococcus aureus), fungi (Candida albicans), and nonpathogenic virus (Salmonella virus P22) is investigated. UV-C irradiation for 10 min in a commercial UV sterilizer effectively disinfects surgical masks. N95 respirators require dry heat at 100 °C for hours while steam treatment works within 5 min. To address the question on safe reuse of the disinfected masks, their bacteria filtration efficiency, particle filtration efficiency, breathability, and fluid resistance are assessed. These performance factors are unaffected after 5 cycles of steam (10 min per cycle) and 10 cycles of dry heat at 100 °C (40 min per cycle) for N95 respirators, and 10 cycles of UV-C irradiation for surgical masks (10 min per side per cycle). These findings provide insights into formulating the standard procedures for reusing masks without compromising their protective ability.

Adaptive Response of Listeria monocytogenes to the Stress Factors in the Food Processing Environment

Listeria monocytogenes are Gram-positive, facultatively anaerobic, non-spore-forming bacteria that easily adapt to changing environmental conditions. The ability to grow at a wide range of temperatures, pH, and salinity determines the presence of the pathogen in water, sewage, soil, decaying vegetation, and animal feed. L. monocytogenes is an etiological factor of listeriosis, especially dangerous for the elderly, pregnant women, and newborns. The major source of L. monocytogenes for humans is food, including fresh and smoked products. Its high prevalence in food is associated with bacterial adaptation to the food processing environment (FPE). Since the number of listeriosis cases has been progressively increasing an efficient eradication of the pathogen from the FPE is crucial. Understanding the mechanisms of bacterial adaptation to environmental stress will significantly contribute to developing novel, effective methods of controlling L. monocytogenes in the food industry.

Guidance on validation of lethal control measures for foodborne pathogens in foods

Food manufacturers are required to obtain scientific and technical evidence that a control measure or combination of control measures is capable of reducing a significant hazard to an acceptable level that does not pose a public health risk under normal conditions of distribution and storage. A validation study provides evidence that a control measure is capable of controlling the identified hazard under a worst-case scenario for process and product parameters tested. It also defines the critical parameters that must be controlled, monitored, and verified during processing. This review document is intended as guidance for the food industry to support appropriate validation studies, and aims to limit methodological discrepancies in validation studies that can occur among food safety professionals, consultants, and third-party laboratories. The document describes product and process factors that are essential when designing a validation study, and gives selection criteria for identifying an appropriate target pathogen or surrogate organism for a food product and process validation. Guidance is provided for approaches to evaluate available microbiological data for the target pathogen or surrogate organism in the product type of interest that can serve as part of the weight of evidence to support a validation study. The document intends to help food manufacturers, processors, and food safety professionals to better understand, plan, and perform validation studies by offering an overview of the choices and key technical elements of a validation plan, the necessary preparations including assembling the validation team and establishing prerequisite programs, and the elements of a validation report.

The microbiological quality of various foods dried by applying different drying methods: a review

With the drying process, the water activity and moisture content of the foods are reduced, so the growth of microorganisms in the foods is largely prevented/postponed. But low-aw foods should not be considered sterile they can be contaminated by fungi and other contaminants during the drying process under unhygienic conditions. If drying is not done to a sufficient degree of moisture during food processing and storage, where dried foods are processed, sometimes the minimum value is reached for the growth of microorganisms. In dry foods, some pathogens, yeast and molds can continue to grow during storage, transport and transportation until the sale and they causing spoilage. They can even cause health problems if enough pathogen or spore cells remain viable. Considering this situation today, it is attempted to obtain high-quality dried foods with good microbiologically and chemically properties. For this purpose, various drying methods have been developed. Most studies suggest that when foods are pre-treated with the ascorbic acid or sodium metabisulfite or applied with various combined methods such as UV irradiation, supercritical carbon dioxide (SCO2), low-pressure superheated steam drying (LPSSD), and infrared (IR) drying, they can be effective on inactivation of microorganisms. We have reviewed in this study how these methods made dried products efficient of microbial inactivation and microbiologically safe.

Bacterial community dynamics during different stages of processing of smoked bacon using the 16S rRNA gene amplicon analysis

To identify the microbial community and origin of the spoilage flora of bacon, the changes in microbial population numbers and community structure were followed along the processing line, using culture-independent and culture-dependent methods. 16S rRNA gene amplicon sequencing (16S-seq) analysis showed that community complexity and structure significantly differed at different processing stages. Some 428 bacterial groups were ascertained at genus level, and Acinetobacter, Pseudomonas, Psychrobacter, and Brochothrix were the predominant bacteria on raw meats. After curing specimens dominated by Psychrobacter, Weissella, Vibrio, Leuconostoc, Myroides, Acinetobacter, and Lactobacillus, a total of 33 species were identified by traditional microbiological analyses and direct sequence determination methods. Our results indicated that curing should be considered one of the primary factors during various processing steps, presumably contaminating the products directly or indirectly.

Integrated photothermal decontamination device for N95 respirators

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) responsible for the COVID-19 global pandemic has infected over 25 million people worldwide and resulted in the death of millions. The COVID-19 pandemic has also resulted in a shortage of personal protective equipment (PPE) in many regions around the world, particularly in middle- and low-income countries. The shortages of PPE, such as N95 respirators, is something that will persist until an effective vaccine is made available. Thus, devices that while being easy to operate can also be rapidly deployed in health centers, and long-term residences without the need for major structural overhaul are instrumental to sustainably use N95 respirators. In this report, we present the design and validation of a decontamination device that combines UV-C & B irradiation with mild-temperature treatment. The device can decontaminate up to 20 masks in a cycle of < 30 min. The decontamination process did not damage or reduce the filtering capacity of the masks. Further, the efficacy of the device to eliminate microbes and viruses from the masks was also evaluated. The photothermal treatment of our device was capable of eradicating > 99.9999% of the bacteria and > 99.99% of the virus tested.

Incorporating strain variability in the design of heat treatments: A stochastic approach and a kinetic approach

For the design of thermal processes, the decimal reduction times (D-values) of target organisms can be used. However, many factors influence the D-value, like inherent organism's characteristics (strain variability), the effect of the history of the cells, as well as product factors and process factors. Strain variability is a very large contributor to the overall variation of the D-value. Hence, the overall reduction of microbial contaminants by a heat treatment is a combination of the occurrence of a strain with a certain heat resistance and its reduction given the prevailing conditions. This reduction can be determined using two approaches: a kinetic analysis based on integral equations or a stochastic approach based on Monte Carlo analysis. In this article, these two approaches are compared using as case studies the inactivation of two microorganisms: Listeria monocytogenes in a pasteurization process and the sporeformer Geobacillus stearothermophilus in a UHT process. Both approaches resulted in similar conclusions, highlighting that the strains with the highest heat resistance are determinant for the overall inactivation, even if the probability of cells having such extreme heat resistance is very low.

Control of Biological Hazards in Insect Processing: Application of HACCP Method for Yellow Mealworm (Tenebrio molitor) Powders

Entomophagy has been part of human diets for a long time in a significant part of the world, but insects are considered to be a novel food everywhere else. It would appear to be a strategic alternative in the future of human diet to face the challenge of ensuring food security for a growing world population, using more environmentally sustainable production systems than those required for the rearing of other animals. Tenebrio molitor, called yellow mealworm, is one of the most interesting insect species in view of mass rearing, and can be processed into a powder that ensures a long shelf life for its use in many potential products. When considering insects as food or feed, it is necessary to guarantee their safety. Therefore, manufacturers must implement a Hazard Analysis Critical Control plan (HACCP), to limit risks for consumers' health. The aim of this case study was to develop a HACCP plan for Tenebrio molitor larvae powders for food in a risk-based approach to support their implementation in industry. Specific purposes were to identify related significant biological hazards and to assess the efficiency of different manufacturing process steps when used as Critical Control Points. Then, combinations of four different processes with four potential uses of powders by consumers in burger, protein shake, baby porridge, and biscuits were analyzed with regard to their safety.

A review on hydrodynamic cavitation disinfection: The current state of knowledge

Disinfection, which aims to eliminate pathogenic microorganisms, is an essential step of water treatment. Hydrodynamic cavitation (HC) has emerged as a promising technology for large-scale disinfection without introducing new chemicals. HC, which can effectively induce sonochemistry by mechanical means, creates extraordinary conditions of pressures of ~1000 bar, local hotspots with ~5000 K, and high oxidation (hydroxyl radicals) in room environment. These conditions can produce highly destructive effects on microorganisms in water. In addition, the enhancements of chemical reactions and mass transfers by HC produce the synergism between HC and disinfectants or other physical treatment methods. HC is generated by hydrodynamic cavitation reactors (HCRs), therefore, their performance basically determines the effectiveness, economical efficiency, and applicability of HC disinfection. Therefore, developing high-performance HCRs and revealing the corresponding disinfection mechanisms are the most crucial issues today. In this review, we summarize the fundamental principles of HC and HCRs and recent development in HC disinfection. The energy release from cavitation phenomenon and corresponding mechanisms are elaborated. The performance (effectiveness, treatment ratio, and cost) of various HCRs, effects of treatment conditions on performance, and applicability of HC disinfection are evaluated and discussed. Finally, recommendations are provided for the future progress based on the analysis of previous studies.

Combining Ag and γ-Fe2O3 properties to produce effective antibacterial nanocomposites

The antibacterial activity of hybrid γ-Fe₂O₃/Ag nanocomposites against the bacterial pathogens E. coli (Gram-negative) and S. aureus (Gram-positive) has been studied. Silver is a well-known bactericidal agent and γ-Fe₂O₃ nanoparticles release heat when they are exposed to alternating magnetic fields. The combination of both properties to fight infections has not been previously explored. The nanocomposites were synthesized through reduction of silver nitrate in the presence of pre-synthesized superparamagnetic γ-Fe₂O₃ nanoparticles. Changing systematically the ratio of γ-Fe₂O₃ and silver precursor and the temperature of the reaction allowed obtaining superparamagnetic nanocomposites with different Ag contents and particle sizes. The antibacterial activity of the samples was tested, and the minimum inhibitory concentrations and minimum bactericidal concentrations of the nanocomposites were determined to compare the microbicidal activity of the samples. It was found that it is related with the release of silver ions from the nanocomposites. Finally, we studied the combination of the bactericidal effect of silver and magnetic hyperthermia finding a synergetic effect between them when plates containing E. coli or S. aureus bacteria with γ-Fe₂O₃/Ag nanocomposites were subjected to an alternating magnetic field. This effect is related with an increase in the release of silver ions due to that heat dissipation.