Loop-mediated isothermal amplification-based microfluidic chip for pathogen detection

The escalating threat of human-associated infectious bacteria in surface aquatic resources: Insights into prevalence, antibiotic resistance, survival mechanisms, detection, and prevention strategies

Anthropogenic activities and climate change profoundly impact water quality, leading to a concerning increase in the prevalence and abundance of bacterial pathogens across diverse aquatic environments. This rise has resulted in a growing challenge concerning the safety of water sources, particularly surface waters and marine environments. This comprehensive review delves into the multifaceted challenges presented by bacterial pathogens, emphasizing threads to human health within ground and surface waters, including marine ecosystems. The exploration encompasses the intricate survival mechanisms employed by bacterial pathogens and the proliferation of antimicrobial resistance, largely driven by human-generated antibiotic contamination in aquatic systems. The review further addresses prevalent pathogenic bacteria, elucidating associated risk factors, exploring their eco-physiology, and discussing the production of potent toxins. The spectrum of detection techniques, ranging from conventional to cutting-edge molecular approaches, is thoroughly examined to underscore their significance in identifying and understanding waterborne bacterial pathogens. A critical aspect highlighted in this review is the imperative for real-time monitoring of biomarkers associated with waterborne bacterial pathogens. This monitoring serves as an early warning system, facilitating the swift implementation of action plans to preserve and protect global water resources. In conclusion, this comprehensive review provides fresh insights and perspectives, emphasizing the paramount importance of preserving the quality of aquatic resources to safeguard human health on a global scale.

Research progress of microfluidics-based food safety detection

High demands for food safety detection and analysis have been advocated with people's increasing living standards. Even though numerous analytical testing techniques have been proposed, their widespread adoption is still constrained by the high limit of detection, narrow detection ranges, and high implementation costs. Due to their advantages, such as reduced sample and reagent consumption, high sensitivity, automation, low cost, and portability, using microfluidic devices for food safety monitoring has generated significant interest. This review provides a comprehensive overview of the latest microfluidic detection platforms (published in recent 4 years) and their applications in food safety, aiming to provide references for developing efficient research strategies for food contaminant detection and facilitating the transition of these platforms from laboratory research to practical field use.

Advances, challenges, and opportunities for food safety analysis in the isothermal nucleic acid amplification/CRISPR-Cas12a era

Global food safety stands out as a prominent public concern, affecting populations worldwide. The recurrent challenge of food safety incidents reveals the need for a robust inspection framework. In recent years, the integration of isothermal nucleic acid amplification with CRISPR-Cas12a techniques has emerged as a promising tool for molecular detection of food hazards, presenting next generation of biosensing for food safety detection. This paper provides a comprehensive review of the current state of research on the synergistic application of isothermal nucleic acid amplification and CRISPR-Cas12a technology in the field of food safety. This innovative combination not only enriches the analytical tools, but also improving assay performance such as sensitivity and specificity, addressing the limitations of traditional methods. The review summarized various detection methodologies by the integration of isothermal nucleic acid amplification and CRISPR-Cas12a technology for diverse food safety concerns, including pathogenic bacterium, viruses, mycotoxins, food adulteration, and genetically modified foods. Each section elucidates the specific strategies employed and highlights the advantages conferred. Furthermore, the paper discussed the challenges faced by this technology in the context of food safety, offering insightful discussions on potential solutions and future prospects.

Detection of Parasites in the Field: The Ever-Innovating CRISPR/Cas12a

The rapid and accurate identification of parasites is crucial for prompt therapeutic intervention in parasitosis and effective epidemiological surveillance. For accurate and effective clinical diagnosis, it is imperative to develop a nucleic-acid-based diagnostic tool that combines the sensitivity and specificity of nucleic acid amplification tests (NAATs) with the speed, cost-effectiveness, and convenience of isothermal amplification methods. A new nucleic acid detection method, utilizing the clustered regularly interspaced short palindromic repeats (CRISPR)-associated (Cas) nuclease, holds promise in point-of-care testing (POCT). CRISPR/Cas12a is presently employed for the detection of Plasmodium falciparum, Toxoplasma gondii, Schistosoma haematobium, and other parasites in blood, urine, or feces. Compared to traditional assays, the CRISPR assay has demonstrated notable advantages, including comparable sensitivity and specificity, simple observation of reaction results, easy and stable transportation conditions, and low equipment dependence. However, a common issue arises as both amplification and cis-cleavage compete in one-pot assays, leading to an extended reaction time. The use of suboptimal crRNA, light-activated crRNA, and spatial separation can potentially weaken or entirely eliminate the competition between amplification and cis-cleavage. This could lead to enhanced sensitivity and reduced reaction times in one-pot assays. Nevertheless, higher costs and complex pre-test genome extraction have hindered the popularization of CRISPR/Cas12a in POCT.

Microfluidic systems for infectious disease diagnostics

Microorganisms, encompassing both uni- and multicellular entities, exhibit remarkable diversity as omnipresent life forms in nature. They play a pivotal role by supplying essential components for sustaining biological processes across diverse ecosystems, including higher host organisms. The complex interactions within the human gut microbiota are crucial for metabolic functions, immune responses, and biochemical signalling, particularly through the gut-brain axis. Viruses also play important roles in biological processes, for example by increasing genetic diversity through horizontal gene transfer when replicating inside living cells. On the other hand, infection of the human body by microbiological agents may lead to severe physiological disorders and diseases. Infectious diseases pose a significant burden on global healthcare systems, characterized by substantial variations in the epidemiological landscape. Fast spreading antibiotic resistance or uncontrolled outbreaks of communicable diseases are major challenges at present. Furthermore, delivering field-proven point-of-care diagnostic tools to the most severely affected populations in low-resource settings is particularly important and challenging. New paradigms and technological approaches enabling rapid and informed disease management need to be implemented. In this respect, infectious disease diagnostics taking advantage of microfluidic systems combined with integrated biosensor-based pathogen detection offers a host of innovative and promising solutions. In this review, we aim to outline recent activities and progress in the development of microfluidic diagnostic tools. Our literature research mainly covers the last 5 years. We will follow a classification scheme based on the human body systems primarily involved at the clinical level or on specific pathogen transmission modes. Important diseases, such as tuberculosis and malaria, will be addressed more extensively.

Disposable and instrument-free nucleic acid lateral flow cassette for rapid and on-site identification of adulterated goat milk

Species identification has become a significant concern due to the growing use of food alternatives that may cause allergies and reduce nutritional value. To address the issue of fraudulent adulteration of goat milk products with cow milk, we have developed an affordable, portable, and user-friendly platform called microfluidic-integrated nucleic acid lateral flow strips (LFS). This platform enables simultaneous detection of components derived from both goats and cows in goat milk. In this study, we have introduced an innovative nucleic acid labeling method. The loop primers of loop-mediated isothermal amplification (LAMP) have been modified with amplification terminator spacer C3 and an oligonucleotide sequence, thus eliminating the requirement for costly antibodies in traditional nucleic acid LFS. This modification not only lowers costs but also enables multiple detections. Additionally, we have integrated the LAMP and LFS assay steps into a microfluidic chip, allowing convenient on-site detection while effectively preventing aerosol contamination of LAMP products. The testing process includes rapid DNA extraction, followed by a short nucleic acid addition and incubation for visualized results in about 50 min. This platform is user-friendly, requiring no specialized equipment or extensive training, making it suitable for rapid on-site detection of dairy products by personnel in diverse fields.

Gravity-driven and rotation-controlled microfluidic chip for point-of-care nucleic acid detection in the fully closed environment

Point-of-care nucleic acid detection is essential for diagnosis and food safety, especially in resource-limited areas. This study reports a gravity-driven and rotation-controlled (GR) chip-coupled lateral flow-based assay (LFA) for point-of-care nucleic acid detection. The sample solution is added to the inlet of the GR chip and flows into the loop-medicated isothermal amplification (LAMP) chamber by the action of gravity. After the LAMP reaction, the GR chip is manually rotated to allow the amplified solution to flow into the LFA chamber for result readout. The GR chip integrates the LAMP reaction and LFA in a fully closed environment, avoiding the aerosol contamination problem. The GR chip's simple and ingenious structure simplifies the fabrication and reduces its cost, making it possible for point-of-care and even home self-testing.

New insights into the roles of fungi and bacteria in the development of medicinal plant

BACKGROUND

The interaction between microorganisms and medicinal plants is a popular topic. Previous studies consistently reported that microorganisms were mainly considered pathogens or contaminants. However, with the development of microbial detection technology, it has been demonstrated that fungi and bacteria affect beneficially the medicinal plant production chain.

AIM OF REVIEW

Microorganisms greatly affect medicinal plants, with microbial biosynthesis a high regarded topic in medicinal plant-microbial interactions. However, it lacks a systematic review discussing this relationship. Current microbial detection technologies also have certain advantages and disadvantages, it is essential to compare the characteristics of various technologies.

KEY SCIENTIFIC CONCEPTS OF REVIEW

This review first illustrates the role of fungi and bacteria in various medicinal plant production procedures, discusses the development of microbial detection and identification technologies in recent years, and concludes with microbial biosynthesis of natural products. The relationship between fungi, bacteria, and medicinal plants is discussed comprehensively. We also propose a future research model and direction for further studies.

Additive manufacturing leveraged microfluidic setup for sample to answer colorimetric detection of pathogens

Colorimetric readout for the detection of infectious diseases is gaining traction at the point of care/need owing to its ease of analysis and interpretation, and integration potential with highly specific loop-mediated amplification (LAMP) assays. However, coupling colorimetric readout with LAMP is rife with challenges including, rapidity, inter-user variability, colorimetric signal quantification, and user involvement in sequential steps of the LAMP assay, hindering its application. To address these challenges, for the first time, we propose a remotely smartphone-operated automated setup consisting of (i) an additively manufactured microfluidic cartridge, (ii) a portable reflected-light imaging setup with controlled epi-illumination (PRICE) module, and (iii) a control and data analysis module. The microfluidic cartridge facilitates sample collection, lysis, mixing of amplification reagents stored on-chip, and subsequent isothermal heating for initiation of amplification in a novel way by employing tunable elastomeric chambers and auxiliary components (heaters and linear actuators). PRICE offers a new imaging setup that captures the colorimetric change of the amplification media over a plasmonic nanostructured substrate in a controlled and noise-free environment for rapid minute-scale nucleic acid detection. The control and data analysis module employs microprocessors to automate cartridge operation in tandem with the imaging module. The different device components were characterized individually and finally, as a proof of concept, SARS-CoV-2 wild-type RNA was detected with a turnaround time of 13 minutes, showing the device's clinical feasibility. The suggested automated device can be adopted in future iterations for other detection and molecular assays that require sequential fluid handling steps.

Diagnosis of invasive fungal infections: challenges and recent developments

BACKGROUND

The global burden of invasive fungal infections (IFIs) has shown an upsurge in recent years due to the higher load of immunocompromised patients suffering from various diseases. The role of early and accurate diagnosis in the aggressive containment of the fungal infection at the initial stages becomes crucial thus, preventing the development of a life-threatening situation. With the changing demands of clinical mycology, the field of fungal diagnostics has evolved and come a long way from traditional methods of microscopy and culturing to more advanced non-culture-based tools. With the advent of more powerful approaches such as novel PCR assays, T2 Candida, microfluidic chip technology, next generation sequencing, new generation biosensors, nanotechnology-based tools, artificial intelligence-based models, the face of fungal diagnostics is constantly changing for the better. All these advances have been reviewed here giving the latest update to our readers in the most orderly flow.

MAIN TEXT

A detailed literature survey was conducted by the team followed by data collection, pertinent data extraction, in-depth analysis, and composing the various sub-sections and the final review. The review is unique in its kind as it discusses the advances in molecular methods; advances in serology-based methods; advances in biosensor technology; and advances in machine learning-based models, all under one roof. To the best of our knowledge, there has been no review covering all of these fields (especially biosensor technology and machine learning using artificial intelligence) with relevance to invasive fungal infections.

CONCLUSION

The review will undoubtedly assist in updating the scientific community's understanding of the most recent advancements that are on the horizon and that may be implemented as adjuncts to the traditional diagnostic algorithms.

Isothermal nucleic acid amplification and its uses in modern diagnostic technologies

Nucleic acids are prominent biomarkers for diagnosing infectious pathogens using nucleic acid amplification techniques (NAATs). PCR, a gold standard technique for amplifying nucleic acids, is widely used in scientific research and diagnosis. Efficient pathogen detection is a key to adequate food safety and hygiene. However, using bulky thermal cyclers and costly laboratory setup limits its uses in developing countries, including India. The isothermal amplification methods are exploited to develop miniaturized sensors against viruses, bacteria, fungi and other pathogenic organisms and have been applied for in situ diagnosis. Isothermal amplification techniques have been found suitable for POC techniques and follow WHO's ASSURED criteria. LAMP, NASBA, SDA, RCA and RPA are some of the isothermal amplification techniques which are preferable for POC diagnostics. Furthermore, methods such as WGA, CPA, HDA, EXPAR, SMART, SPIA and DAMP were introduced for even more accuracy and robustness. Using recombinant polymerases and other nucleic acid-modifying enzymes has dramatically broadened the detection range of target pathogens under the scanner. The coupling of isothermal amplification methods with advanced technologies such as CRISPR/Cas systems, fluorescence-based chemistries, microfluidics and paper-based sensors has significantly influenced the biosensing and diagnosis field. This review comprehensively analyzed isothermal nucleic acid amplification methods, emphasizing their advantages, disadvantages and limitations.

Label-Free Sequence-Specific Visualization of LAMP Amplified Salmonella via DNA Machine Produces G-Quadruplex DNAzyme

Salmonella is one of four key global causes of diarrhea, and in humans, it is generally contracted through the consumption of contaminated food. It is necessary to develop an accurate, simple, and rapid method to monitor Salmonella in the early phase. Herein, we developed a sequence-specific visualization method based on loop-mediated isothermal amplification (LAMP) for the detection of Salmonella in milk. With restriction endonuclease and nicking endonuclease, amplicons were produced into single-stranded triggers, which further promoted the generation of a G-quadruplex by a DNA machine. The G-quadruplex DNAzyme possesses peroxidase-like activity and catalyzes the color development of 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid) (ABTS) as the readouts. The feasibility for real samples analysis was also confirmed with Salmonella spiked milk, and the sensitivity was 800 CFU/mL when observed with the naked eye. Using this method, the detection of Salmonella in milk can be completed within 1.5 h. Without the involvement of any sophisticated instrument, this specific colorimetric method can be a useful tool in resource-limited areas.

Feasibility of a DNA biosensor assay based on loop-mediated isothermal amplification combined with a lateral flow dipstick assay for the visual detection of Ascaridia galli eggs in faecal samples

Ascaridia galli is an important nematode that causes ascaridiasis in free-range and indoor system chicken farms. Infection with A. galli may damage the intestinal mucosa and inhibit nutrient absorption, leading to a reduced growth rate, weight loss and a decreased egg production. Consequently, A. galli infection is a significant health problem in chickens. In this study, we developed a loop-mediated isothermal amplification coupled with a lateral flow dipstick (LAMP-LFD) assay for the visual detection of A. galli eggs in faecal samples. The LAMP-LFD assay consists of six primers and one DNA probe that recognize the internal transcribed spacer 2 (ITS2) region; it can be performed within 70 min and the results can be interpreted with the naked eye. Using the LAMP-LFD assay developed in this study, A. galli DNA was specifically amplified without any cross-reactions with other related parasites (Heterakis gallinarum, Raillietina echinobothrida, R. tetragona, R. cesticillus, Cotugnia sp., Echinostoma miyagawai) and definitive hosts (Gallus gallus domesticus, Anas platyrhynchos domesticus). The minimum detectable DNA concentration was 5 pg/μl, and the detectable egg count was 50 eggs per reaction. The assay can be performed in a water bath, without the need for post-mortem morphological investigations and laboratory instruments. It is therefore a viable alternative for the detection of A. galli in chicken faeces and can replace classical methods in field screening for epidemiological investigations, veterinary health and poultry farming management. RESEARCH HIGHLIGHTSThis is the first study using the LAMP-LFD assay for Ascaridia galli detection.The results can be observed by the naked eye.The developed assay can be used to detect Ascaridia galli eggs in faecal samples.

Low-Temperature Loop-Mediated Isothermal Amplification Operating at Physiological Temperature

Loop-mediated isothermal amplification (LAMP) is one of the most widely used isothermal amplification technologies in molecular diagnostics. However, LAMP operates at a high temperature of 65 °C; thus, operating LAMP at a lower temperature is desirable to maximize its usefulness for on-site diagnosis. In this study, we propose a new version of LAMP, termed low-temperature LAMP, which operates at the physiological temperature of 37 °C. Low-temperature LAMP differs from conventional LAMP operating at 65 °C in terms of the concentrations of MgSO₄ and deoxyribonucleoside triphosphates (dNTPs), as well as the lengths of DNA probes, which are crucial for the execution of low-temperature LAMP. Under the optimal conditions, the amplification efficiency of low-temperature LAMP is comparable to that of conventional LAMP. In addition, the ligation reaction at 37 °C, which is necessary to detect actual target nucleic acids, is combined without altering the temperature, enabling the identification of miR-21, a cancer-promoting oncogenic miRNA, with high sensitivity and selectivity. The method described in this paper does not require expensive DNA modifications or special additives and would facilitate the widespread application of LAMP in facility-limited or point-of-care settings, paving the way to improvements in other isothermal-amplification-based techniques.

Visual detection of Cronobacter sakazakii on a microfluidic chip fabricated by a 3D molding method

Cronobacter sakazakii (C. sakazakii) is a pathogenic bacterium associated with life-threatening neonatal infections that have been linked to contaminated powdered infant formula (PIF). Most C. sakazakii testing is still limited in microbiology laboratories due to the need for sophisticated equipment and professional technicians. Microfluidic chips combined with isothermal amplification analysis are shown to be one of the most attractive microbiological on-site detection platforms. In this study, PDMS microfluidic chips were fabricated by a simple 3D molding method and sealed with "PDMS glue". The chip consisted of an inlet, a microchannel, six reaction wells, and six vent holes. And based on the 16S rRNA and ITS genes of C. sakazakii, we have successfully proposed a multiplex competitive annealing mediated isothermal amplification (mCAMP) assay on the microfluidic chip for the visual detection of C. sakazakii in PIF samples. The primers were fixed in the reaction wells of the chip before detection, which can be preserved for 60 days at 4 °C. The results showed that the established mCAMP assay had high specificity, and the limit of detection was 2.2 × 10³ CFU g^-1. With enrichment culture, even if the initial inoculation level is 1 CFU g^-1, the mCAMP assay can still detect the presence of C. sakazakii in spiked PIF samples. The test results are visible to the naked eye, which is suitable for rapid analysis in resource-limited settings.

Rapid on-site nucleic acid testing: On-chip sample preparation, amplification, and detection, and their integration into all-in-one systems

As nucleic acid testing is playing a vital role in increasingly many research fields, the need for rapid on-site testing methods is also increasing. The test procedure often consists of three steps: Sample preparation, amplification, and detection. This review covers recent advances in on-chip methods for each of these three steps and explains the principles underlying related methods. The sample preparation process is further divided into cell lysis and nucleic acid purification, and methods for the integration of these two steps on a single chip are discussed. Under amplification, on-chip studies based on PCR and isothermal amplification are covered. Three isothermal amplification methods reported to have good resistance to PCR inhibitors are selected for discussion due to their potential for use in direct amplification. Chip designs and novel strategies employed to achieve rapid extraction/amplification with satisfactory efficiency are discussed. Four detection methods providing rapid responses (fluorescent, optical, and electrochemical detection methods, plus lateral flow assay) are evaluated for their potential in rapid on-site detection. In the final section, we discuss strategies to improve the speed of the entire procedure and to integrate all three steps onto a single chip; we also comment on recent advances, and on obstacles to reducing the cost of chip manufacture and achieving mass production. We conclude that future trends will focus on effective nucleic acid extraction via combined methods and direct amplification via isothermal methods.

Microfluidics for COVID-19: From Current Work to Future Perspective

Spread of coronavirus disease 2019 (COVID-19) has significantly impacted the public health and economic sectors. It is urgently necessary to develop rapid, convenient, and cost-effective point-of-care testing (POCT) technologies for the early diagnosis and control of the plague's transmission. Developing POCT methods and related devices is critical for achieving point-of-care diagnosis. With the advantages of miniaturization, high throughput, small sample requirements, and low actual consumption, microfluidics is an essential technology for the development of POCT devices. In this review, according to the different driving forces of the fluid, we introduce the common POCT devices based on microfluidic technology on the market, including paper-based microfluidic, centrifugal microfluidic, optical fluid, and digital microfluidic platforms. Furthermore, various microfluidic-based assays for diagnosing COVID-19 are summarized, including immunoassays, such as ELISA, and molecular assays, such as PCR. Finally, the challenges of and future perspectives on microfluidic device design and development are presented. The ultimate goals of this paper are to provide new insights and directions for the development of microfluidic diagnostics while expecting to contribute to the control of COVID-19.

Polarization-independent microchannel in a high-speed-scan femtosecond laser-assisted etching of fused silica

Microchannels fabricated by femtosecond laser-assisted chemical etching are of great use in biochemical analysis. In this paper, we study the morphology change of etched microchannels in fused silica by controlling the laser scan speed, and we find a significant difference between the chemical etched length and volume. The fabricated microchannels would gradually become tapered along the scan direction, which influences the flow of the hydrofluoric (HF) reagent and the etching rate. As a result, the difference ratios of the etched length and volume, respectively, reach -5.56% and -41.83% followed by the scan speed increasing from 5 to 200 µm/s. Microchannels with polarization independence and better aspect ratio could be obtained in a high-speed-scan mode. We suggest that laser-induced structural transformation from interconnected microcracks to nanogratings could be responsible for this change. Aforementioned results offer a feasible approach to achieve polarization-independent microchannels, which is in favor of accelerating the fabrication of three-dimensional microfluidic devices.

Visual and rapid identification of Chlamydia trachomatis and Neisseria gonorrhoeae using multiplex loop-mediated isothermal amplification and a gold nanoparticle-based lateral flow biosensor

Sexually transmitted chlamydia and gonorrhea infections caused by the bacteria Chlamydia trachomatis and Neisseria gonorrhoeae remain a major public health concern worldwide, particularly in less developed nations. It is crucial to use a point of care (POC) diagnostic method that is quick, specific, sensitive, and user-friendly to treat and control these infections effectively. Here, a novel molecular diagnostic assay, combining multiplex loop-mediated isothermal amplification (mLAMP) with a visual gold nanoparticles-based lateral flow biosensor (AuNPs-LFB) was devised and used for highly specific, sensitive, rapid, visual, and easy identification of C. trachomatis and N. gonorrhoeae. Two unique independent primer pairs were successful designed against the ompA and orf1 genes of C. trachomatis and N. gonorrhoeae, respectively. The optimal mLAMP-AuNPs-LFB reaction conditions were determined to be 67°C for 35 min. The detection procedure, involving crude genomic DNA extraction (~5 min), LAMP amplification (35 min), and visual results interpretation (<2 min), can be completed within 45 min. Our assay has a detection limit of 50 copies per test, and we did not observe any cross-reactivity with any other bacteria in our testing. Hence, our mLAMP-AuNPs-LFB assay can potentially be used for POC testing to detect C. trachomatis and N. gonorrhoeae in clinical settings, particularly in underdeveloped regions.

Design and 3D printing of an electrochemical sensor for Listeria monocytogenes detection based on loop mediated isothermal amplification

The aim of this work is the design and 3D printing of a new electrochemical sensor for the detection of Listeria monocytogenes based on loop mediated isothermal amplification (LAMP). The food related diseases involve a serious health issue all over the world. Listeria monocytogenes is one of the major problems of contaminated food, this pathogen causes a disease called listeriosis with a high rate of hospitalization and mortality. Having a fast, sensitive and specific detection method for food quality control is a must in the food industry to avoid the presence of this pathogen in the food chain (raw materials, facilities and products). A point-of-care biosensor based in LAMP and electrochemical detection is one of the best options to detect the bacteria on site and in a very short period of time. With the numerical analysis of different geometries and flow rates during sample injection in order to avoid bubbles, an optimized design of the microfluidic biosensor chamber was selected for 3D-printing and experimental analysis. For the electrochemical detection, a novel custom gold concentric-3-electrode consisting in a working electrode, reference electrode and a counter electrode was designed and placed in the bottom of the chamber. The LAMP reaction was optimized specifically for a primers set with a limit of detection of 1.25 pg of genomic DNA per reaction and 100% specific for detecting all 12 Listeria monocytogenes serotypes and no other Listeria species or food-related bacteria. The methylene blue redox-active molecule was tested as the electrochemical transducer and shown to be compatible with the LAMP reaction and very clearly distinguished negative from positive food samples when the reaction is measured at the end-point inside the biosensor.

Application of Microfluidics for Bacterial Identification

Bacterial infections continue to pose serious public health challenges. Though anti-bacterial therapeutics are effective remedies for treating these infections, the emergence of antibiotic resistance has imposed new challenges to treatment. Often, there is a delay in prescribing antibiotics at initial symptom presentation as it can be challenging to clinically differentiate bacterial infections from other organisms (e.g., viruses) causing infection. Moreover, bacterial infections can arise from food, water, or other sources. These challenges have demonstrated the need for rapid identification of bacteria in liquids, food, clinical spaces, and other environments. Conventional methods of bacterial identification rely on culture-based approaches which require long processing times and higher pathogen concentration thresholds. In the past few years, microfluidic devices paired with various bacterial identification methods have garnered attention for addressing the limitations of conventional methods and demonstrating feasibility for rapid bacterial identification with lower biomass thresholds. However, such culture-free methods often require integration of multiple steps from sample preparation to measurement. Research interest in using microfluidic methods for bacterial identification is growing; therefore, this review article is a summary of current advancements in this field with a focus on comparing the efficacy of polymerase chain reaction (PCR), loop-mediated isothermal amplification (LAMP), and emerging spectroscopic methods.

LAMP-Based Point-of-Care Biosensors for Rapid Pathogen Detection

Seeking optimized infectious pathogen detection tools is of primary importance to lessen the spread of infections, allowing prompt medical attention for the infected. Among nucleic-acid-based sensing techniques, loop-mediated isothermal amplification is a promising method, as it provides rapid, sensitive, and specific detection of microbial and viral pathogens and has enormous potential to transform current point-of-care molecular diagnostics. In this review, the advances in LAMP-based point-of-care diagnostics assays developed during the past few years for rapid and sensitive detection of infectious pathogens are outlined. The numerous detection methods of LAMP-based biosensors are discussed in an end-point and real-time manner with ideal examples. We also summarize the trends in LAMP-on-a-chip modalities, such as classical microfluidic, paper-based, and digital LAMP, with their merits and limitations. Finally, we provide our opinion on the future improvement of on-chip LAMP methods. This review serves as an overview of recent breakthroughs in the LAMP approach and their potential for use in the diagnosis of existing and emerging diseases.

Electrochemical Gene Amplification Signal Detection of Disposable Biochips Using Electrodes

Real-time Polymerase Chain Reaction (RT-PCR), a molecular diagnostic technology, is spotlighted as one of the quickest and fastest diagnostic methods for the actual coronavirus (SARS-CoV-2). However, the fluorescent label-based technology of the RT-PCR technique requires expensive equipment and a sample pretreatment process for analysis. Therefore, this paper proposes a biochip based on Electrochemical Impedance Spectroscopy (EIS). In this paper, it was possible to see the change according to the concentration by measuring the impedance with a chip made of two electrodes with different shapes of sample DNA.

Microfluidic Gas Sensors: Detection Principle and Applications

With the rapid growth of emerging point-of-use (POU)/point-of-care (POC) detection technologies, miniaturized sensors for the real-time detection of gases and airborne pathogens have become essential to fight pollution, emerging contaminants, and pandemics. However, the low-cost development of miniaturized gas sensors without compromising selectivity, sensitivity, and response time remains challenging. Microfluidics is a promising technology that has been exploited for decades to overcome such limitations, making it an excellent candidate for POU/POC. However, microfluidic-based gas sensors remain a nascent field. In this review, the evolution of microfluidic gas sensors from basic electronic techniques to more advanced optical techniques such as surface-enhanced Raman spectroscopy to detect analytes is documented in detail. This paper focuses on the various detection methodologies used in microfluidic-based devices for detecting gases and airborne pathogens. Non-continuous microfluidic devices such as bubble/droplet-based microfluidics technology that have been employed to detect gases and airborne pathogens are also discussed. The selectivity, sensitivity, advantages/disadvantages vis-a-vis response time, and fabrication costs for all the microfluidic sensors are tabulated. The microfluidic sensors are grouped based on the target moiety, such as air pollutants such as carbon monoxide and nitrogen oxides, and airborne pathogens such as E. coli and SARS-CoV-2. The possible application scenarios for the various microfluidic devices are critically examined.

Ultrasensitive and visual detection of human norovirus genotype GII.4 or GII.17 using CRISPR-Cas12a assay

Background

Integrating CRISPR-Cas12a sensors with isothermal signal amplification can be exploited to develop low-cost, disposable, and ultrasensitive assays for the diagnostics of human pathogens.

Methods

RT-RAA-Cas12a-mediated real-time or end-point fluorescent and lateral flow strip (LFS) assays for direct detection of norovirus (NOV) genotype GII.4 or GII.17 were explored.

Results

The results showed that our RT-RAA-Cas12a-mediated fluorescent and LFS assay could detect NOV GII.4 or GII.17 by targeting the viral protein 1 gene. Our RT-RAA-Cas12a-mediated fluorescent and LFS assay can specifically detect NOV GII.4 or GII.17 with no cross-reactivity for other related viruses. The low limit of detection could reach 0.1 copies/μL within approximately 30–40 min, and the results were visualized using an ultraviolet light illuminator or on a LFS without complex equipment. In addition, our RT-RAA-Cas12a-mediated fluorescent and LFS assay provided a visual and faster alternative to real-time RT-PCR assay, with 95.7% and 94.3% positive predictive agreement and 100% negative predictive agreement.

Conclusions

Together, our RT-RAA-Cas12a-mediated approach would have a great potential for point-of-care diagnostics of NOV GII.4 and/or GII.17 in resource-limited settings.

A Combination of Novel Nucleic Acid Cross-Linking Dye and Recombinase-Aided Amplification for the Rapid Detection of Viable Salmonella in Milk

Salmonella, as an important foodborne pathogen, can cause various diseases, such as severe enteritis. In recent years, various types of nucleicacid-intercalating dyes have been utilized to detect viable Salmonella. However, in principle, the performance of existing nucleic acid dyes is limited because they depend on the integrity of cell membrane. Herein, based on the metabolic activity of bacteria, a novel DNA dye called thiazole orange monoazide (TOMA) was introduced to block the DNA from dead bacteria. Recombinase-aided amplification (RAA) was then performed to detect viable Salmonella in samples. In this study, the permeability of TOMA to the cell membrane of Salmonella was evaluated via confocal laser scanning microscopy and fluorescence emission spectrometry. The limit of detection (LOD) of the TOMA–RAA method was 2.0 × 10⁴ CFU/mL in pure culture. The feasibility of the TOMA–RAA method in detecting Salmonella was assessed in spiked milk. The LOD for Salmonella was 3.5 × 10² CFU/mL after 3 h of enrichment and 3.5 × 10⁰ CFU/mL after 5 h of enrichment. The proposed TOMA–RAA assay has great potential to be applied to accurately detect and monitor foodborne pathogens in milk and its byproducts.

Progression of LAMP as a Result of the COVID-19 Pandemic: Is PCR Finally Rivaled?

Reflecting on the past three years and the coronavirus disease 19 (COVID-19) pandemic, varying global tactics offer insights into the most effective public-health responses. In the US, specifically, rapid and widespread testing was quickly prioritized to lower restrictions sooner. Essentially, only two types of COVID-19 diagnostic tests were publicly employed during the peak pandemic: the rapid antigen test and reverse transcription polymerase chain reaction (RT-PCR). However, neither test ideally suited the situation, as rapid antigen tests are far too inaccurate, and RT-PCR tests require skilled personnel and sophisticated equipment, leading to long wait times. Loop-mediated isothermal amplification (LAMP) is another exceptionally accurate nucleic acid amplification test (NAAT) that offers far quicker time to results. However, RT-LAMP COVID-19 tests have not been embraced as extensively as rapid antigen tests or RT-PCR. This review will investigate the performance of current RT-LAMP-based COVID-19 tests and summarize the reasons behind the hesitancy to embrace RT-LAMP instead of RT-PCR. We will also look at other LAMP platforms to explore possible improvements in the accuracy and portability of LAMP, which could be applied to COVID-19 diagnostics and future public-health outbreaks.

When smartphone enters food safety: A review in on-site analysis for foodborne pathogens using smartphone-assisted biosensors

Pathogens are one of the supreme threats for the public health around the world in food supply chain. The on-site monitoring is an emerging trend for screening pathogens during the food processing and preserving. Traditional analytical tools have been unable to satisfy the current demands. Smartphones have enormous potentials for achieving on-site detection of foodborne pathogens, with intrinsic advantages such as small size, high accessibility, fast processing speed, and powerful imaging capacity. This review aims to synthesize the current advances in smartphone-assisted biosensors (SABs) for sensing foodborne pathogens, and briefly put forward the problem that consist in the research. We present the role of nanotechnology and recognition modes targeting foodborne pathogens in SABs, and discuss the signal conversion platforms coupling with smartphone. The challenges and perspectives in SABs are also proposed. The smartphone analytics area is moving forward, and it much be subject to careful quality standards and validation.

Bifunctional ligand-mediated amplification of polydiacetylene response to biorecognition of diethylstilbestrol for on-site smartphone detection

Polydiacetylene (PDA) is very suited for sensitively detecting large biomolecules, and its unique chromatic properties enable visual read-out. However, application to the selective detection of small molecules remains challenging. Here, bifunctional ligands are studied to amplify the color change of PDA for biorecognition of small molecules for the smartphone-based detection of diethylstilbestrol (DES). PDA is decorated with streptavidin (PDA-SA, blue), and biotin-modified DES (bio-DES) is prepared as a bifunctional ligand to couple with PDA-SA and DES antibody. Since multiple bio-DES can bind to a single SA, then multiple SAs on PDA lead to an increased surface coverage of the vesicle. In samples without DES, PDA-SA-bio-DES-DES antibody complexes will form, leading to a color transition (blue to red); this color transition is greatly amplified by antibody-induced aggregation of the complexes. When DES is present, aggregation is inhibited due to competition for the antibody and PDA-SA-bio-DES retains its blue color. A linear relationship (0.4-1250 ng mL^-1) is found between the colorimetric response and the logarithmic DES concentration, with adequate selectivity, accuracy (82.24-118.64%), and precision (below 8.24%). Finally, a paper-based DES PDA biosensor is developed with visual and smartphone-based detection limits of 10 ng mL^-1 and 0.85 ng mL^-1 in water, respectively.

Development of a proof-of-concept microfluidic portable pathogen analysis system for water quality monitoring

Waterborne diseases cause millions of deaths worldwide, especially in developing communities. The monitoring and rapid detection of microbial pathogens in water is critical for public health protection. This study reports the development of a proof-of-concept portable pathogen analysis system (PPAS) that can detect bacteria in water with the potential application in a point-of-sample collection setting. A centrifugal microfluidic platform is adopted to integrate bacterial cell lysis in water samples, nucleic acid extraction, and reagent mixing with a droplet digital loop mediated isothermal amplification assay for bacteria quantification onto a single centrifugal disc (CD). Coupled with a portable "CD Driver" capable of automating the assay steps, the CD functions as a single step bacterial detection "lab" without the need to transfer samples from vial-to-vial as in a traditional laboratory. The prototype system can detect Enterococcus faecalis, a common fecal indicator bacterium, in water samples with a single touch of a start button within 1 h and having total hands-on-time being less than 5 min. An add-on bacterial concentration cup prefilled with absorbent polymer beads was designed to integrate with the pathogen CD to improve the downstream quantification sensitivity. All reagents and amplified products are contained within the single-use disc, reducing the opportunity of cross contamination of other samples by the amplification products. This proof-of-concept PPAS lays the foundation for field testing devices in areas needing more accessible water quality monitoring tools and are at higher risk for being exposed to contaminated waters.

Overcoming Multidrug Resistance of Antibiotics via Nanodelivery Systems

Antibiotic resistance has become a threat to microbial therapies nowadays. The conventional approaches possess several limitations to combat microbial infections. Therefore, to overcome such complications, novel drug delivery systems have gained pharmaceutical scientists’ interest. Significant findings have validated the effectiveness of novel drug delivery systems such as polymeric nanoparticles, liposomes, metallic nanoparticles, dendrimers, and lipid-based nanoparticles against severe microbial infections and combating antimicrobial resistance. This review article comprises the specific mechanism of antibiotic resistance development in bacteria. In addition, the manuscript incorporated the advanced nanotechnological approaches with their mechanisms, including interaction with the bacterial cell wall, inhibition of biofilm formations, activation of innate and adaptive host immune response, generation of reactive oxygen species, and induction of intracellular effect to fight against antibiotic resistance. A section of this article demonstrated the findings related to the development of delivery systems. Lastly, the role of microfluidics in fighting antimicrobial resistance has been discussed. Overall, this review article is an amalgamation of various strategies to study the role of novel approaches and their mechanism to fight against the resistance developed to the antimicrobial therapies.

T-Cup: A Cheap, Rapid, and Simple Home Device for Isothermal Nucleic Acid Amplification

During the SARS-CoV2 pandemic, it has become clear that centralized testing suffers from multiple bottlenecks. Logistics, number of machines, and people available to run the diagnostic tests are limited. A solution to those bottlenecks would be a fully decentralized system, where people can test themselves at home and only report back the outcome of the test in a centralized database. Here a noninstrumental device capable of achieving isothermal conditions useful for detecting the SARS-CoV2 RNA using loop mediated amplification (LAMP) tests is presented. This device, compared to others reported in literature or present on the market, is cheap, easy to produce and use, and has little impact on the environment. Using a simple aluminum coffee capsule, a phase change material, and a 3D printed holder, this device, when placed in boiling water, is able to maintain a temperature of 65 °C for 25 min, required for running the LAMP reaction. In principle, this device can be applied to any LAMP reaction, and hence employed for many different applications, and can be deployed in large quantities in short amount of time.

Molecular Techniques as Alternatives of Diagnostic Tools in China as Schistosomiasis Moving towards Elimination

Schistosomiasis japonica caused by the trematode flukes of Schistosoma japonicum was one of the most grievous infectious diseases in China in the mid-20th century, while its elimination has been placed on the agenda of the national strategic plan of healthy China 2030 after 70 years of continuous control campaigns. Diagnostic tools play a pivotal role in warfare against schistosomiasis but must adapt to the endemic status and objectives of activities. With the decrease of prevalence and infection intensity of schistosomiasis in human beings and livestock, optimal methodologies with high sensitivity and absolute specificity are needed for the detection of asymptomatic cases or light infections, as well as disease surveillance to verify elimination. In comparison with the parasitological methods with relatively low sensitivity and serological techniques lacking specificity, which both had been widely used in previous control stages, the molecular detection methods based on the amplification of promising genes of the schistosome genome may pick up the baton to assist the eventual aim of elimination. In this article, we reviewed the developed molecular methods for detecting S. japonicum infection and their application in schistosomiasis japonica diagnosis. Concurrently, we also analyzed the chances and challenges of molecular tools to the field application process in China.

A rapid and ultrasensitive dual detection platform based on Cas12a for simultaneous detection of virulence and resistance genes of drug-resistant Salmonella

Accurate, sensitive, and rapid detection of Salmonella and determination of whether it carries drug resistance genes plays an important role in guiding the clinical medication of salmonellosis and laying a foundation for studying the mechanism of drug resistance transmission of Salmonella. Here, a novel nontransferable, ultrasensitive dual detection platform (Cas12a-Ddp) was developed. The round cap allowed for temporary storage of more Cas12a detection solution than flat cap, enabling one-pot assays and reducing aerosol contamination. The results were read out in dual mode by the microplate reader and UV visualization to achieve sensitive dual-target detection of the virulence genes and drug resistance genes of Salmonella simultaneously, with the possibility of onsite detection. Cas12a-Ddp was combined with multiple polymerase chain reactions and recombinase polymerase amplifications successively. An ultrasensitive dual detection limit of 1 CFU/mL was obtained without any cross-reaction within 40 min. This was an improvement of 1-2 orders of magnitude over the existing methods. Cas12a-Ddp overcame the influence of proteins and fat in liquid matrix foods. It was used for the detection of drug-resistant Salmonella in milk and skim milk powder, also with the dual detection limit of 1 CFU/mL and spiked recovery of 68.58%-158.49%. It was also used for the analysis of Salmonella resistance rate analysis. The Cas12a-Ddp provided a reliable, fast, sensitive, and practical multi-CRISPR detection platform.

Trigging Isothermal Circular Amplification-Based Tuning of Rigorous Fluorescence Quenching into Complete Restoration on a Multivalent Aptamer Probe Enables Ultrasensitive Detection of Salmonella

Detection of pathogenic bacteria is of vital significance for combating and preventing infectious diseases. In this work, we developed a multivalent aptamer probe (Multi-VAP)-based trigging isothermal circular amplification (TICA) for rapidly and ultrasensitively detecting Salmonella. In this sensing system, the fluorescence of Multi-VAP was strongly quenched via the dual effect of FRET. Introduction of Salmonella to the system forced the configuration change of Multi-VAP, leading to the occurrence of a TICA responsible for tuning all of the fluorescence-quenched Multi-VAP into a complete restoration state. This prominent feature allows the reasonable combination of a strong background restraint and great target signal amplification into one sensing system, which in turn benefits the improvement of the signal-to-noise ratio to ensure that the system has an ultrahigh sensitivity. Combined with the employment of an aptamer to ensure that it has excellent specificity, the Salmonella can be quantitatively and qualitatively analyzed even from human serum. The total processing merely requires sample addition and incubation. The turnaround time of the complete analysis from "sample-to-result" was within 30 min. With the method to decrease the time to detect and simplify the process to operate, the assay was successfully used as a sensing platform for specific detection of as few as 9 CFU/mL Salmonella.

Rapid and Visual Detection of Vibrio parahaemolyticus in Aquatic Foods Using blaCARB-17 Gene-Based Loop-Mediated Isothermal Amplification with Lateral Flow Dipstick (LAMP-LFD)

Vibrio parahaemolyticus is recognized as one of the most important foodborne pathogens responsible for gastroenteritis in humans. The bla_CARB-17 gene is an intrinsic β-lactamase gene and a novel species-specific genetic marker of V. parahaemolyticus. In this study, a loop-mediated isothermal amplification (LAMP) assay combined with a lateral flow dipstick (LFD) was developed targeting this bla_CARB-17 gene. The specificity of LAMP-LFD was ascertained by detecting V. parahaemolyticus ATCC 17802 and seven other non-V. parahaemolyticus strains. Finally, the practicability of LAMP-LFD was confirmed by detection with V. parahaemolyticus-contaminated samples and natural food samples. The results showed that the optimized reaction parameters of LAMP are as follows: 2.4 mmol/l Mg²⁺, 0.96 mmol/l dNTPs, 4.8 U Bst DNA polymerase, and an 8:1 ratio of inner primer to outer primer, at 63°C for 40 min. The optimized reaction time of the LFD assay is 60 min. Cross-reactivity analysis with the seven non-V. parahaemolyticus strains showed that LAMP-LFD was exclusively specific for V. parahaemolyticus. The detection limit of LAMP-LFD for V. parahaemolyticus genomic DNA was 2.1 × 10^-4 ng/μl, corresponding to 630 fg/reaction and displaying a sensitivity that is 100-fold higher than that of conventional PCR. LAMP-LFD in a spiking study revealed a detection limit of approximately 6 CFU/ml, which was similar with conventional PCR. The developed LAMP-LFD specifically identified the 10 V. parahaemolyticus isolates from 30 seafood samples, suggesting that this LAMP-LFD may be a suitable diagnostic method for detecting V. parahaemolyticus in aquatic foods.

A Portable Device for LAMP Based Detection of SARS-CoV-2

This paper reports the design, development, and testing of a novel, yet simple and low-cost portable device for the rapid detection of SARS-CoV-2. The device performs loop mediated isothermal amplification (LAMP) and provides visually distinguishable images of the fluorescence emitted from the samples. The device utilises an aluminium block embedded with a cartridge heater for isothermal heating of the sample and a single-board computer and camera for fluorescence detection. The device demonstrates promising results within 20 min using clinically relevant starting concentrations of the synthetic template. Time-to-signal data for this device are considerably lower compared to standard quantitative Polymerase Chain Reaction(qPCR) machine (~10–20 min vs. >38 min) for 1 × 10² starting template copy number. The device in its fully optimized and characterized state can potentially be used as simple to operate, rapid, sensitive, and inexpensive platform for population screening as well as point-of-need severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2) detection and patient management.

A real-time LAMP-based dual-sample microfluidic chip for rapid and simultaneous detection of multiple waterborne pathogenic bacteria from coastal waters

Waterborne pathogens are becoming a serious worldwide health hazard; thus, the regular monitoring of epidemic pathogens is urgently required for public safety. In the present study, we developed a microfluidic chip integrated loop-mediated isothermal amplification technique (on-chip LAMP) to simultaneously detect 10 waterborne pathogenic bacteria, Campylobacter jejuni, Listeria monocytogenes, Salmonella enterica, Shigella flexneri, Staphylococcus aureus, Vibrio alginolyticus, V. cholerae, V. parahemolyticus, V. vulnificus, and Yersinia enterocolitica. This method was capable of simultaneously completing 22 genetic analyses of two specimens and achieved limits of detection ranging from 7.92 × 10-3 to 9.54 × 10-1 pg of genomic DNA of pure bacteria per reaction. The processes from sample loading to microfluidic operation were in a highly automated format, and the LAMP reaction ran to completion within 35 minutes, with a minimal volume of 22 μl per each half of a single chip. The coefficient of variation for the time-to-positive value was less than 0.1, indicating an excellent reproducibility of the dual-sample on-chip LAMP assay. The clinical sensitivity and specificity in analyses of coastal water samples were 93.1% and 98.0%, respectively, in comparison with traditional microbiological methods. Our established dual-sample on-chip LAMP assay provides an effective multiple-pathogen analysis of waterborne bacterial pathogens. This indicates that the method is applicable for on-site detection and routine monitoring of waterborne bacteria in aquatic environments.

Heat-enhancing aggregation of gold nanoparticles combined with loop-mediated isothermal amplification (HAG-LAMP) for Plasmodium falciparum detection

Malaria infection represents a major public health and economic issue that leads to morbidity and mortality globally. A highly effective and uncomplicated detection tool is required for malaria control in geographical hotspots of transmission. We developed a simple and more sensitive novel approach for the detection of the 18S rRNA gene of Plasmodium falciparum based on loop-mediated isothermal amplification (LAMP) and visualization using colorimetric, streptavidin-functionalized gold nanoparticles (SA-GNPs). Two loop primers of LAMP were biotinylated to produce biotin-containing products during amplification. After the addition of SA-GNPs, clusters of avidin-biotin complexes were established in the LAMP structure. While the positive reactions remained wine red, the negative reactions became colorless with partial aggregations induced by hydrochloric acid (HCl) under heat enhancement (60 °C). All steps of the assay were completed within 50 min, its detection limit was 1 parasite/μL, and it was highly specific for P. falciparum. This effortless detection system with high sensitivity and specificity could provide an alternative choice for malaria diagnostics in resource-limited regions.

Simultaneous detection of multiple bacterial and viral aquatic pathogens using a fluorogenic loop-mediated isothermal amplification-based dual-sample microfluidic chip

Rapid and user-friendly diagnostic tests are necessary for early diagnosis and immediate detection of diseases, particularly for on-site screening of pathogenic microorganisms in aquaculture. In this study, we developed a dual-sample microfluidic chip integrated with a real-time fluorogenic loop-mediated isothermal amplification assay (dual-sample on-chip LAMP) to simultaneously detect 10 pathogenic microorganisms, that is Aeromonas hydrophila, Edwardsiella tarda, Vibrio harveyi, V. alginolyticus, V. anguillarum, V. parahaemolyticus, V. vulnificus, infectious hypodermal and haematopoietic necrosis virus, infectious spleen and kidney necrosis virus, and white spot syndrome virus. This on-chip LAMP provided a nearly automated protocol that can analyse two samples simultaneously, and the tests achieved limits of detection (LOD) ranging from 10⁰ to 10^-1  pg/μl for genomic DNA of tested bacteria and 10^-4 to 10^-5  pg/μl for recombinant plasmid DNA of tested viruses, with run times averaging less than 30 min. The coefficient of variation for the time-to-positive value was less than 10%, reflecting a robust reproducibility. The clinical sensitivity and specificity were 93.52% and 85.53%, respectively, compared to conventional microbiological or clinical methods. The on-chip LAMP assay provides an effective dual-sample and multiple pathogen analysis, and thus would be applicable to on-site detection and routine monitoring of multiple pathogens in aquaculture.

LAMP in Neglected Tropical Diseases: A Focus on Parasites

Neglected Tropical Diseases (NTDs), particularly those caused by parasites, remain a major Public Health problem in tropical and subtropical regions, with 10% of the world population being infected. Their management and control have been traditionally hampered, among other factors, by the difficulty to deploy rapid, specific, and affordable diagnostic tools in low resource settings. This is especially true for complex PCR-based methods. Isothermal nucleic acid amplification techniques, particularly loop-mediated isothermal amplification (LAMP), appeared in the early 21st century as an alternative to PCR, allowing for a much more affordable molecular diagnostic. Here, we present the status of LAMP assays development in parasite-caused NTDs. We address the progress made in different research applications of the technique: xenomonitoring, epidemiological studies, work in animal models and clinical application both for diagnosis and evaluation of treatment success. Finally, we try to shed a light on the improvements needed to achieve a true point-of-care test and the future perspectives in this field.