Production, safety, health effects and applications of diacylglycerol functional oil in food systems: a review

A comparative lipid profile of four fish species: From muscle to industrial by-products based on RPLC-Q-TOF-MS/MS

Fish are crucial for the fishing industry and essential nutrient provision, including lipids. This study employed a high-throughput lipidomic approach to evaluate and contrast the lipid profiles of three marine fish species (P. crocea, S. fuscens, and C. saira) and one freshwater species (H. molitrix) across head, muscle, and viscera. Over 1000 molecular lipid species across 17 subclasses were identified. Notably, acylated monogalactosyldiacylglycerol (acMGDG) was detected for the first time in these species, with a high prevalence of saturated fatty acids (44.7 %-87.7 %). Glycerolipids (67.7 - 86.3 %) and PLs (10.7 - 31.8 %) were identified as the dominant lipid classes. Marine fish muscles displayed higher PL content than freshwater species, and P. crocea viscera contained over 30 % PLs of total lipids. In particular, ether phosphatidyl ethanolamine incorporated more DHA than ether phosphatidylcholine. The viscera of four fish species also exhibited a significant abundance of diacylglycerol (DG), indicating their potential as functional lipid sources. Multivariate analysis identified triglyceride (TG) (59:13), DG (16:1/22:5), and MGDG (16:0/18:2) as potential biomarkers for differentiating among fish anatomical parts. This study deepens the understanding of the nutritional values of these fish, providing guidance for consumer dietary choices and paving the way for transforming previously underutilized by-products into resources with high-value potential.

Comparison of lipidome profiles in human milk from Chinese Han and Korean ethnic groups based on high-throughput lipidomic techniques

The composition of milk lipids varies across different ethnic sources. The lipidome profiles of Chinese Han human milk (HHM) and Chinese Korean human milk (KHM) were investigated in this study. A total of 741 lipids were identified in HHM and KHM. Twenty-eight differentially expressed lipids (DEL) were screened between the 2 milk groups; among these, 6 triacylglycerols (TG), 13 diacylglycerols (DG), 7 free fatty acids (FFA), and 1 monoglyceride (MG) were upregulated in KHM. Carnitine (CAR) was upregulated in HHM. Most DEL showed a single peak distribution in both groups. The correlations, related pathways and diseases of these DEL were further analyzed. The results demonstrated that DG, MG, and FFA showed highly positive correlations with each other (r > 0.8). The most enriched Kyoto Encyclopedia of Genes and Genomes (https://www.kegg.jp/kegg/) and Human Metabolome Database (http://www.hmdb.ca) pathways were inositol phosphate metabolism, and α-linolenic acid and linolenic acid metabolism, respectively. Major depressive disorder-related FFA (20:5) and FFA (22:6) were more abundant in KHM, whereas HHM showed more obesity-related CAR. These data potentially provide lipidome information regarding human milk from different ethnicities in China.

Physical, textural and crystallization properties of ground nut oil-based diacylglycerols in W/O margarine system

Enzymatic glycerolysis produced ground nut oil-based diacylglycerols (GNO-DAG) with a purity of 43.28 ± 0.89% (GNO-DAG40). GNO-DAG80 (with a DAG purity of 87.33 ± 0.61%) was obtained after purification using molecular distillation. Traditional palm oil was mixed with the "liquid" DAG as margarine base oils. Subsequent evaluations of palm oil-DAG-based fats (PO-GNO DAG) as a margarine replacement in a W/O model system showed that the material was an ideal functional base oil with improved aeration properties and plasticity during application. The binary system physical, textural and crystallization property were determined, and the compatibility of the binary mixed system was analyzed by constructing a phase diagrams. The PO-GNO DAG showed decent compatibility between the two phases and had better texture and rheological properties. In addition, PO-GNO DAG40 showed better apparent viscosity and aeration characteristics than PO-GNO DAG80, with potential application in the food specialty fats industry.

Superior component compositions and antioxidant activity of Volvariella volvacea oil compared to those of Agrocybe cylindracea and two Lentinula edodes oils

The biological activity of an oil not only depends on its fatty acid composition but also the lipid composition and trace components. In this paper, to select the optimal mushroom oil, the component compositions (fatty acids, lipids, polyphenols, flavones, tocopherols, and unsaponifiable matters) and antioxidant activities in vitro of four mushroom oils (Agrocybe cylindracea, two Lentinula edodes, and Volvariella volvacea) were investigated and compared. The results showed that the four tested oils had the same fatty acid composition in different amounts, but the lipid component, minor components, and free radical scavenging activity in the tested oils varied widely depending on the type of mushroom. Overall, Volvariella volvacea oil was considered superior to the other three tested oils, as it had the largest contents of polar lipids, diglycerides, polyunsaturated fatty acids (74.38%), unsaponifiable matter (319.09 mg/kg), total phenols (124.08 mg/100 g), tocopherols (139.86 mg/100 g), as well as the highest ABTS and FRAP values (349.45 and 3801.70 μmol Trolox/100 g). This finding suggests that Volvariella volvacea oil is a promising resource that should be further researched.

Lipidomics reveals lipid changes in the intramuscular fat of geese at different growth stages

The quality (color, tenderness, juiciness, protein content, and fat content) of poultry meat is closely linked to age, with older birds typically exhibiting increased intramuscular fat (IMF) deposition. However, specific lipid metabolic pathways involved in IMF deposition remain unknown. To elucidate the mechanisms underlying lipid changes, we conducted a study using meat geese at 2 distinct growth stages (70 and 300 d). Our findings regarding the approximate composition of the meat revealed that as the geese aged 300 d, their meat acquired a chewier texture and displayed higher levels of IMF. Liquid chromatography-mass spectrometry (LC-MS) was employed for lipid profiling of the IMF. Using a lipid database, we identified 849 lipids in the pectoralis muscle of geese. Principal component analysis and orthogonal partial least squares discriminant analysis were used to distinguish between the 2 age groups and identify differential lipid metabolites. As expected, we observed significant changes in 107 lipids, including triglycerides, diglycerides, phosphatidylethanolamine, alkyl-glycerophosphoethanolamine, alkenyl-glycerophosphoethanolamine, phosphatidylcholine, phosphatidylinositol, lysophosphatidylserine, ceramide-AP, ceramide-AS, free fatty acids, cholesterol lipids, and N-acyl-lysophosphatidylethanolamine. Among these, the glyceride molecules exhibited the most pronounced changes and played a pivotal role in IMF deposition. Additionally, increased concentration of phospholipid molecules was observed in breast muscle at 70 d. Unsaturated fatty acids attached to lipid side chain sites enrich the nutritional value of goose meat. Notably, C16:0 and C18:0 were particularly abundant in the 70-day-old goose meat. Pathway analysis demonstrated that glycerophospholipid and glyceride metabolism were the pathways most significantly associated with lipid changes during goose growth, underscoring their crucial role in lipid metabolism in goose meat. In conclusion, this work provides an up-to-date study on the lipid composition and metabolic pathways of goose meat and may provide a theoretical basis for elucidating the nutritional value of goose meat at different growth stages.

Quality characteristics of peanut protein-based patties produced with pre-emulsified olive oil as a fat replacer: Influence of acylglycerol type

The emulsion (O/W) may be used as a fat replacer to develop healthier meat analogs. The purpose of this work was to evaluate the effects of oil incorporation methods (direct oil addition and emulsion addition) and oil types [triacylglycerol (TAG) and diacylglycerol (DAG)] on the quality characteristics of peanut protein-based patties crosslinked by transglutaminase (TGase). The patties formulated with emulsions showed larger texture parameters (springiness, cohesiveness and gumminess), lower cooking loss and higher acceptability compared with directly adding oil. The rheological results confirmed that the presence of emulsions strengthened the gel structure in patties, which allowed the patties containing emulsions to stabilize free water. Whereas, TAG-based emulsion was more effective than DAG-based emulsion in improving quality of products, possibly because the competitive adsorption at oil-water interface of DAG reduced the crosslinking between the interfacial protein and adjacent protein molecules. This study revealed the relationship between the acylglycerol type in emulsion and the patty quality, providing a reference for the development of plant-based patties.

Integrated lipidomic and transcriptomic analysis reveals diacylglycerol accumulation in olive of Longnan (China)

Background

Olive (Olea europaea L.) oil accumulate more diacylglycerols (DAG) than mostly vegetable oils. Unsaturated fatty acids-enriched DAG consumption enhanced wellness in subjects. However, the mechanism of DAG accumulation is not yet fully understood.

Methods

In this study, gene network of DAG accumulation and fatty acid composition in the two olive mesocarps ("Chenggu 32" (CG) and "Koroneiki" (QJ)) were investigated by integrating lipidome and transcriptome techniques.

Results

A total of 1,408 lipid molecules were identified by lipidomic analysis in olive mesocarp, of which DAG (DAG36:3, DAG36:4 and DAG36:5) showed higher content, and triacylglycerols (TAG54:3, TAG54:4) exhibited opposite trend in CG. Specifically, DAG was rich in polyunsaturated fatty acids (especially C18:2) at the sn-2 position, which was inconsistent with TAG at the same positions (Primarily C18:1). Transcriptomic analysis revealed that phospholipase C (NPC, EC 3.1.4.3) were up-regulated relative to QJ, whereas diacylglycerol kinase (ATP) (DGK, EC 2.7.1.107), diacylglycerol acyltransferase (DGAT, EC 2.3.1.20), and phospholipid: diacylglycerol acyltransferase (PDAT, EC 2.3.1.158) were down-regulated.

Conclusion

We speculated that the non-acyl coenzyme A pathway played a significant role in DAG biosynthesis. Additionally, fatty acyl-ACP thioesterase B (FATB, EC 3.1.2.14), stearoyl [acyl-carrier-protein] 9-desaturase (SAD, EC 1.14.19.2) and omega-6 fatty acid desaturase (FAD2, EC 1.14.19.6) were highly expressed in CG and may be involved in regulating fatty acid composition. Meanwhile, phospholipase A1 (LCAT, EC 3.1.1.32) involved in the acyl editing reaction facilitated PUFA linkage at the sn-2 position of DAG. Our findings provide novel insights to increase the DAG content, improve the fatty acid composition of olive oil, and identify candidate genes for the production of DAG-rich oils.

Influence of 1,3-diacylglycerol on physicochemical and digestion properties of nanoemulsions and its enhancement of encapsulation and bioaccessibility of hydrophobic nobiletin

Lipid-based delivery systems are commonly used to encapsulate hydrophobic bioactive compounds for enhancing their bioaccessibility and bioavailability, especially for triacylglycerol (TAG) oil-based delivery systems. However, studies on the development of 1,3-diacylglycerol (DAG) oil-based delivery systems are rather limited. Herein, the influence of 1,3-DAG oil as a carrier oil on the properties of nanoemulsions and the bioaccessibility of encapsulated hydrophobic nobiletin (NOB) were investigated. High-purity 1,3-DAG (over 93% pure) was prepared by a combination of enzymatic esterification and ethanol crystallization. 1,3-DAG oil as a carrier oil could be used to formulate nanoemulsions with smaller droplet size, narrower size distribution and similar stability compared to TAG oil. Importantly, 1,3-DAG oil could efficiently encapsulate high-loading NOB (1.45 mg g-1) in nanoemulsions and significantly improve the bioaccessibility of NOB (above 80%), which is attributable to its massive lipolysis and higher encapsulation capacity than TAG oil. Moreover, the addition of the 1,3-DAG component in TAG oil significantly improved the properties of nanoemulsions and the loading and bioaccessibility of NOB, especially as the 1,3-DAG content was not less than 50%. The structure of lipids (DAG versus TAG) influenced the nanoemulsion properties and the bioaccessibility of encapsulated NOB. Based on the good properties of 1,3-DAG oil coupled with its health benefits, 1,3-DAG oil-based nanoemulsion delivery systems have great prospects for improving and extending emulsion properties and bioactivity as well as bioaccessibility enhancement.

Interpretable Machine Learning on Metabolomics Data Reveals Biomarkers for Parkinson's Disease

The use of machine learning (ML) with metabolomics provides opportunities for the early diagnosis of disease. However, the accuracy of ML and extent of information obtained from metabolomics can be limited owing to challenges associated with interpreting disease prediction models and analyzing many chemical features with abundances that are correlated and "noisy". Here, we report an interpretable neural network (NN) framework to accurately predict disease and identify significant biomarkers using whole metabolomics data sets without a priori feature selection. The performance of the NN approach for predicting Parkinson's disease (PD) from blood plasma metabolomics data is significantly higher than other ML methods with a mean area under the curve of >0.995. PD-specific markers that predate clinical PD diagnosis and contribute significantly to early disease prediction were identified including an exogenous polyfluoroalkyl substance. It is anticipated that this accurate and interpretable NN-based approach can improve diagnostic performance for many diseases using metabolomics and other untargeted 'omics methods.

Lipidomics insight on differences between human MFGM and dietary-derived lipids

Milk fat globule membrane (MFGM) contains lipids, which are essential for promoting infant brain development and improving cognition. In this study, the lipid differences between human MFGM and four dietary lipid sources (cow MFGM, soybean, krill, and yolk) were compared using the UHPLC-Q-Exactive MS-based lipidomics techniques. A total of 45 lipid classes and 5048 lipid species were detected. The analysis of phospholipid classes revealed that the lipid composition of human MFGM and cow MFGM was more similar than the other dietary-derived lipids. Additionally, the human MFGM lipid species were compared with cow MFGM, soybean, krill, and yolk, and 401, 416, 494, and 444 significantly different lipids were identified, respectively. Through lipid metabolic pathway analysis, differential lipids were mainly involved in the glycerophospholipid metabolic pathway. Overall, these results will provide a rationale for the future addition of lipids to infant formula to more closely approximate human MFGM lipid profiles.

New insights into the role of dietary triglyceride absorption in obesity and metabolic diseases

The incidence of obesity and associated metabolic diseases is increasing globally, adversely affecting human health. Dietary fats, especially triglycerides, are an important source of energy for the body, and the intestine absorbs lipids through a series of orderly and complex steps. A long-term high-fat diet leads to intestinal dysfunction, inducing obesity and metabolic disorders. Therefore, regulating dietary triglycerides absorption is a promising therapeutic strategy. In this review, we will discuss diverse aspects of the dietary triglycerides hydrolysis, fatty acid uptake, triglycerides resynthesis, chylomicron assembly, trafficking, and secretion processes in intestinal epithelial cells, as well as potential targets in this process that may influence dietary fat-induced obesity and metabolic diseases. We also mention the possible shortcomings and deficiencies in modulating dietary lipid absorption targets to provide a better understanding of their administrability as drugs in obesity and related metabolic disorders.

New food, new technology: innovative spreadable cream with strawberry syrup

A strawberry spreadable cream was developed, valorizing regional raw materials, contributing to food waste reduction and agri-food ecosystem sustainability. Spreadable creams are water-in-oil emulsions whose lipid phase normally contains a blend of vegetable oils, natural colourants, stabilizers, emulsifiers, flavourings, antioxidants, lecithin, and fat-soluble vitamins. The aqueous phase normally contains skim milk proteins and small quantities of other ingredients, such as salt, preservatives, thickeners, and water-soluble vitamins. The methodology involved the experimental technological development articulated with microbiological, proximal, physicochemical, and sensorial analysis. This new product revealed nutritional advantages over similar products already on the market. The final prototype was subjected to food pairing and food design with incremental acceptance according to gastronomic use, in addition to its direct use as a spreadable cream. This work was part of the project Agrio et Emulsio—new products development (POCI-01-0145-FEDER-023583), whose main objective was the formulation and design of innovative food emulsions based on processed raw materials, with potential application in certain markets such as gourmet, diet, and vegan.

Structure-guided preparation of fuctional oil rich in 1,3-diacylglycerols and linoleic acid from Camellia oil by combi-lipase

BACKGROUND

Diacylglycerol (DAG)-enriched oil has been attracting attention because of its nutritional benefits and biological functions, although the composition of its various free fatty acids (FFAs) and an unclear relationship between substrate and yield make it difficult to be identified and qualified with respect to its production. In the present study, linoleic acid-enriched diacylglycerol (LA-DAG) was synthesized and enriched from Camellia oil by the esterification process using the combi-lipase Lipozyme TL IM/RM IM system.

RESULTS

The relationship between FFA composition and DAG species productivity was revealed. The results showed that heterogeneous FFA with a major constituent (more than 50%) exhibited higher DAG productivity and inhibited triacylglycerol productivity compared to homogeneous constituents. Joint characterization by high-performance liquid chromatography-evaporative light scattering detection, gas chromatography-mass spectrometry and ultra-performance liquid chromatography-heated electrospray ionization-tandem mass spectrometry identified that DAG components contained dilinoleic acid acyl glyceride, linoleyl-oleyl glyceride and dioleic acid acyl glyceride in esterification products. Under the optimum conditions, 60.4% 1,3-DAG and 61.3% LA-DAG in the crude product at 1 h reaction were obtained, and further purified to 81.7% LA-DAG and 94.7% DAG via silica column chromatography.

CONCLUSION

The present study provides a guideline for the identification of DAG species, as well as a structure-guided preparation method of DAG-enriched oils via the cost-effective combi-lipase. © 2022 Society of Chemical Industry.

Fermentative Production of Diacylglycerol by Endophytic Fungi Screened from Taxus chinensis var. mairei

Diacylglycerol (DAG) production by microbial fermentation has broad development prospects. In the present study, five endophytic fungi which could accumulate DAG were screened from Taxus chinensis var. mairei by using potato dextrose agar plate and flask cultivation in potato dextrose broth culture medium. The strains were biologically identified based on morphological features and semi-quantitative PCR. The identification results indicated that the five strains belonged to different genera: Fusarium annulatum (F. annulatum, coded as MLP41), Trichoderma dorotheae (T. dorotheae, coded as MLG23), Colletotrichum aeschynomenes (C. aeschynomenes, coded as MLY23), Pestalotiopsis scoparia (P. scoparia, coded as MLY31W), and Penicillium cataractarum (P. cataractarum, coded as MLGP11). The crude lipids from the strains and their corresponding triacylglycerol, 1,2-DAG, and 1,3-DAG fractions separated via thin-layer chromatography were mainly composed of palmitic acid, stearic acid, oleic acid, and linoleic acid, which in total accounted for higher than 94% of the content. The effects of fermentation conditions on the DAG productivity were discussed, and the yields of DAG were determined based on the ¹H NMR spectra of crude lipids. The highest total DAG yields of F. annulatum, T. dorotheae, C. aeschynomenes, P. scoparia, and P. cataractarum were 112.28, 126.42, 189.87, 105.61, and 135.56 mg/L, respectively. C. aeschynomenes had the strongest potential to produce DAG. The results showed that this may be a new promising route for the production of DAG via fermentation by specific endophytic fungi, such as C. aeschynomenes.

Deep-fat Frying Using Soybean Oil-based Diacylglycerol-Palm Olein Oil Blends: Thermo-oxidative Stability, 3-MCPDE and Glycidyl Ester Formation

Diacylglycerol (DAG) is commonly known as one of the precursors for the 3-monochloro-1,2-propanediol esters (3-MCPDE) and glycidyl esters (GE) formation. However, due to its health-promoting effects, its potential as alternative frying medium was examined. This study aimed to assess the frying performance of soybean oil-based diacylglycerol oil (DO) and its oil blends with palm olein (PO), in comparison with PO. Four different oil types (DO, PO, OB I (DO:PO, 1:1, w/w) and OB II (DO:PO, 1:2, w/w)) were used to fry potato chips for five consecutive days at 180℃. The formation of oxidation compounds, acylglycerol composition, 3-MCPDE and GE changes throughout the frying study were investigated. Both OB I and OB II exhibited lower oxidation compounds' formation rates than PO. Besides, significant (p < 0.05) reductions of 3-MCPDE and increments of GE levels were observed in all frying systems throughout the frying study. After 25 frying cycles, the 3-MCPDE levels in all frying oils were below 0.13 mg/kg, while the GE levels ranged from 1.51 mg/kg to 1.89 mg/kg. Despite the poorer oxidative stability of DO, its 3-MCPDE and GE levels were much lower compared to PO. In comparison to DO, the 3-MCPDE degradation and GE formation rates were enhanced and reduced, respectively with the blending of PO and DO. This study showed the potential of DO:PO oil blend in deep-fat frying application. With appropriate blending ratio of DO and PO, an alternative frying medium with enhanced nutritional value and oxidative stability could be developed.

Engineering the Thermostability of the Mono- and Diacylglycerol Lipase SMG1 for the Synthesis of Diacylglycerols

Diacylglycerols (DAGs) display huge application prospectives in food industries. Therefore, new strategies to produce diacylglycerides are needed. Malassezia globose lipase (SMG1) could be used to synthesize DAGs. However, the poor thermostability of SMG1 seriously hampers its application. Herein, a rational design was used to generate a more thermostable SMG1. Compared with the wild type (WT), the M5D mutant (Q34P/A37P/M176V/G177A/M294R/ G28C-P206C), which contains five single-point mutations and one additional disulfide bond, displayed a 14.0 °C increase in the melting temperature (T_m), 5 °C in the optimal temperature, and 1154.3-fold in the half-life (t_1/2) at 55 °C. Meanwhile, the specific activity towards DAGs of the M5D variant was improved by 3.0-fold compared to the WT. Molecular dynamics (MD) simulations revealed that the M5D mutant showed an improved rigid structure. Additionally, the WT and the M5D variants were immobilized and used for the production of DAGs. Compared with the WT, the immobilized M5D-catalyzed esterification showed a 9.1% higher DAG content and a 22.9% increase in residual activity after nine consecutive cycles. This study will pave the way for the industrial application of SMG1.

Genetic manipulation of the interconversion between diacylglycerols and triacylglycerols in Rhodosporidium toruloides

The basidiomycetous yeast Rhodosporidium toruloides (R. toruloides) is an excellent producer for neutral lipids, including triacylglycerols (TAG). Partially because genetic tools for this yeast were less developed, limited efforts were shown to explore its capacity for the production of higher-value lipids such as diacylglycerols (DAG). Here, four genes linked to the interconversion between DAG and TAG were manipulated to promote the production of DAG and free fatty acids (FFA). Among them, three TAG synthesis-related genes, DGA1, LRO1, and ARE1, were down-regulated successively via the RNA interference technology, and an endogenous TAG lipase encoded by TGL5 was fused with LDP1 and over-expressed to convert TAG into DAG and FFA. Results showed that those engineered R. toruloides strains grew normally under nutrient-rich conditions but notably slower than the parental strain NP11 in the lipid production stage. When cultivated in nitrogen-limited media, engineered strains were able to produce total lipids with improved contents of DAG and FFA by up to two-fold and three-fold, respectively. Further correlation analysis between lipid composition and cell density indicated that the formation of TAG correlated positively with cell growth; however, other lipids including DAG did negatively. This study offered valuable information and strains to engineer R. toruloides for advanced production of fatty acid derivatives.

Advances in enzyme biocatalysis for the preparation of functional lipids

Functional lipids, mainly ω-3 polyunsaturated fatty acids (n-3 PUFAs) such as eicosapentaenoic (EPA; 20:5n-3) and docosahexaenoic (DHA; 22:6n-3), are known to have a variety of health benefits. Lipases and phospholipases are widely used to prepare different forms of structured lipids, since biocatalytic methods can be carried out under mild conditions, preserving the quality of the products. On the other hand, many processes still are conducted at high temperatures and with organic solvents, which are conditions unfavorable for the production of nutritional products. This article gives an updated overview of enzyme biocatalysis methods for the preparation of different derivatives containing n-3 PUFAs, including specific reactions, enzyme immobilization research for high-efficiency catalysis, and enzyme engineering technologies (higher selectivity, stability, and activity). Furthermore, advanced control strategies of biocatalytic processes and reactors are presented. The future prospect and opportunities for marine functional lipids are also discussed. Therefore, the obtainment of enzymes endowed with superior properties and the development of optimized processes, still have to be pursued to achieve greener bio-catalyzed processes.

Lipidomics Profiles and Lipid Metabolite Biomarkers in Serum of Coal Workers' Pneumoconiosis

As a serious occupational pulmonary fibrosis disease, pneumoconiosis still lacks effective biomarkers. Previous studies suggest that pneumoconiosis may affect the body's lipid metabolism. The purpose of this study was to explore lipidomics profiles and lipid metabolite biomarkers in the serum of coal workers' pneumoconiosis (CWP) by a population case-control study. A total of 150 CWP cases and 120 healthy controls from Beijing, China were included. Blood lipids were detected in serum biochemistry. Lipidomics was performed in serum samples for high-throughput detection of lipophilic metabolites. Serum high density lipoprotein cholesterol (HDL-C) decreased significantly in CWP cases. Lipidomics data found 131 differential lipid metabolites between the CWP case and control groups. Further, the top eight most important differential lipid metabolites were screened. They all belonged to differential metabolites of CWP at different stages. However, adjusting for potential confounding factors, only three of them were significantly related to CWP, including acylhexosylceramide (AHEXCER 43:5), diacylglycerol (DG 34:8) and dimethyl-phosphatidylethanolamine (DMPE 36:0|DMPE 18:0_18:0), of which good sensitivity and specificity were proven. The present study demonstrated that lipidomics profiles could change significantly in the serum of CWP patients and that the lipid metabolites represented by AHEXCER, DG and DMPE may be good biomarkers of CWP.

Future of Structured Lipids: Enzymatic Synthesis and Their New Applications in Food Systems

Structured lipids (SLs) refer to a new type of functional lipid obtained by modifying natural triacylglycerol (TAG) through the restructuring of fatty acids, thereby altering the composition, structure, and distribution of fatty acids attached to the glycerol backbones. Due to the unique functional characteristics of SLs (easy to absorb, low in calories, reduced serum TAG, etc.), there is increasing interest in the research and application of SLs. SLs were initially prepared using chemical methods. With the wide application of enzymes in industries and the advantages of enzymatic synthesis (mild reaction conditions, high catalytic efficiency, environmental friendliness, etc.), synthesis of SLs using lipase has aroused great interest. This review summarizes the reaction system of SL production and introduces the enzymatic synthesis and application of some of the latest SLs discussed/developed in recent years, including medium- to long-chain triacylglycerol (MLCT), diacylglycerol (DAG), EPA- and DHA-enriched TAG, human milk fat substitutes, and esterified propoxylated glycerol (EPG). Lastly, several new ways of applying SLs (powdered oil, DAG plastic fat, inert gas spray oil, and emulsion) in the future food industry are also highlighted.

Fabrication, characterization, and purification of nutraceutical diacylglycerol components from Camellia oil

Converting triacylgycerols (TAGs) from edible oils and fats into structured diacylglycerols (DAGs) is meaningful for reducing obesity. Camellia oil, rich in linoleic acid, has the potential to form structured linoleic acid-1,3-diacylglycerol (LA-1,3-DAG) nutrients in the industry. In this research, the physicochemical properties of modified Camellia oil (MCO) by enzymatic esterification were analyzed by Gas Chromatography-Mass Spectrometry (GC-MS), Differential Scanning Calorimetry (DSC), High Performance Liquid Chromatography-Evaporative Light Scattering Detection (HPLC-ELSD), and Ultra Performance Liquid Chromatography-Tandem Mass Spectrometry (UPLC-MS/MS). The relationship between reaction conditions and the DAG compositions is disclosed using multiple factors. It is found that high constituents of DAG increase the melting and crystallization temperature of MCO, lipase Novozym 435 gives the best yield of targeted nutrients (DAG, 1,3-DAG, LA-DAG), and the mixture of lipases, Lipozyme TL IM and Lipozyme RM IM, shows a synergistic effect in the synthetic process of DAG. Subsequently, MCO containing 65.4% DAG, 54.7% LA-DAG, and 47.6% 1,3-DAG content at optimal conditions (2% enzyme dosage, 4 h reaction time, 2.4:1 substrate molar ratio, 25.8% t-butanol as solvent, 60°C temperature) has been obtained and purified using silica column to obtain the final DAG oil containing 96.1% DAG, 64.7% 1,3-DAG, and 78.4% LA-DAG. High constituents of structured DAG oil rich in LA-1,3-DAG can be obtained by enzymatic esterification for industrial production.

Comparative Lipidomic and Metabolomic Analyses Reveal the Mystery of Lacquer Oil from Toxicodendron vernicifluum for the Treatment of “Yuezi” Disease in Nujiang, China: From Anti-Inflammation and Anti-Postpartum Depression Perspective

Background: In southwest China, especially in Nujiang, lacquer oil from the drupes of Toxicodendron vernicifluum (Stokes) F. A. Barkley, including black lacquer oil (BLO) and white lacquer oil (WLO), is one of the most important edible oils for the local people. Through the field investigation, the locals believe that lacquer oil has benefits for parturient women and for the treatment of “Yuezi” disease. However, studies on bioactivities and the chemical compositions of lacquer oil are limited.

Purpose: This study was designed to reveal the mystery of lacquer oil for the treatment of “Yuezi” disease by testing its anti-inflammatory and anti-postpartum depressant activities and related bioactive compounds.

Methods: The anti-inflammatory effects of lacquer oil were examined by establishing a lipopolysaccharide (LPS)-induced RAW264.7 cell inflammation model and detecting the level of pro-inflammatory factors such as NO, IL-6 and TNF-α. The antidepressant effects of lacquer oil were studied by building a mouse model of postpartum depression (PPD), and the animal behavior changes of PPD model mice were assessed by open field test (OFT), forced swimming test (FST) and tail suspension test (TST). The chemical profiles of BLO and WLO were detected by lipidomic and the untargeted metabolomic research methods based on UPLC-MS/MS.

Results: The results showed that BLO and WLO exerted anti-inflammatory effects by reducing the release of pro-inflammatory factors and BLO had better anti-inflammatory effects than WLO. While only BLO had anti-postpartum depressant activities, as evidenced by the significantly reduced the immobility time of the BLO-treated PPD mice in TST and FST compared to the PPD model mice. The comparative lipidomic analysis revealed that BLO contained high levels of Diacylglycerols (DAG) and Diacylglyceryl trimethylhomoserines (DGTS) but low level of ceramides (Cer), sphingomyelines (SM), phosphatidylcholines (PC) and phosphatidylethanolamines (PE) compared with WLO. Metabolomics analysis showed that there were 57 chemical markers between BLO and WLO, of which 17 potential biomarkers have been declared to possess anti-inflammatory and/or antidepressant activities.

Conclusion: The findings of this study furnish a scientific support for the traditional uses of lacquer oil for the treatment of “Yuezi” disease from anti-inflammation and anti-postpartum depression perspective.

W/O high internal phase emulsion featuring by interfacial crystallization of diacylglycerol and different internal compositions

High internal phase emulsions (HIPEs) show promising application in food and cosmetic industries. In this work, diacylglycerol (DAG) was applied to fabricate water-in-oil (W/O) HIPEs. DAG-based emulsion can hold 60% water and the emulsion rigidity increased with water content, indicating the water droplets acted as "active fillers". Stable HIPE with 80% water fraction was formed through the combination of 6 wt% DAG with 1 wt% polyglycerol polyricinoleate (PGPR). The addition of 1 w% kappa (κ)-carrageenan and 0.5 M NaCl greatly reduced the droplet size and enhanced emulsion rigidity, and the interfacial tension of the internal phase was reduced. Benefiting from the Pickering crystals-stabilized interface by DAG as revealed by the microscopy and enhanced elastic modulus of emulsions with the gelation agents, the HIPEs demonstrated good retaining ability for anthocyanin and β-carotene. This study provides insights for the development of W/O HIPEs to fabricate low-calories margarines, spread or cosmetic creams.

Microalgae-Derived Health Supplements to Therapeutic Shifts: Redox-Based Study Opportunities with AIE-Based Technologies

Reactive oxygen species (ROS) are highly reactive molecules, serve the normal signaling in different cell types. Targeting ROS as the chemical signals, different stress based strategies have been developed to synthesis different anti-inflammatory molecules in microalgae. These molecules could be utilized as health supplements in human. To provoke the ROS-mediated defence systems, their connotation with the associated conditions must be well understood, therefore, proper tools for studying ROS in natural state are essential. The in vivo detection of ROS with phosphorescent probes offers promising opportunities to study these molecules in a non-invasive manner. Most of the common problems in the traditional fluorescent probes are lower photostability, excitation intensity, slow responsiveness, and the microenvironment that challenge their performance. Some ROS-specific aggregationinduced emission luminogens (AIEgens) with pronounced spatial and temporal resolution have recently demonstrated high selectivity, rapid responsiveness, and efficacies to resolve the aggregation-caused quenching issues. The nanocomposites of some AIE-photosensitizers can also improve the ROS-mediated photodynamic therapy. These AIEgens could be used to induce bioactive components in microalgae through altering the ROS signaling, therefore are more auspicious for biomedical research. This study reviews the prospects of AIEgen-based technologies to understand the ROS mediated bio-physiological processes in microalgae for better healthcare benefits.

Tailored rigidity of W/O Pickering emulsions using diacylglycerol-based surface-active solid lipid nanoparticles

Pickering water-in-oil (W/O) emulsions were fabricated by using medium-long chain diacylglycerol (MLCD)-based solid lipid nanoparticles (SLNs) and the connection between the characteristics of the SLNs and the colloidal stability of the emulsions was established. Via melt-emulsification and ultrasonication, MLCD-based SLNs with particle sizes of 120-300 nm were obtained with or without other surfactants. The particle size of the SLNs was influenced by the chemical properties of the surfactants, and surfactants decreased the contact angle of SLNs at the oil-water interface. Gelation was observed in SLNs modified by sodium stearoyl lactylate and lecithin, whereas the addition of Tween 20 resulted in a homogeneous SLN solution. The adsorption of surfactants onto SLN surfaces caused the production of higher amounts of α crystals accompanied by delayed crystallization onset which contributed to the reduction of particle size, interfacial tension and oil wetting ability. The W/O emulsions with higher rigidity and physical stability can be obtained by varying surfactant types and by increasing SLN mass ratios to 60%, whereby more SLNs are adsorbed at the droplet surface as a Pickering stabilizer. This study provides useful insights for the development of diacylglycerol-based SLNs and Pickering W/O emulsions which have great potential for food, cosmetic and pharmaceutical applications.

Improved Thermal Properties and Flow Behavior of Palm Olein-Based Diacylglycerol: Impact of Sucrose Stearate Incorporation

Palm olein-based diacylglycerol (POL-DAG) oil is a healthy product that is produced through enzymatic reaction and purification processes. However, POL-DAG oil easily solidifies at room temperature and crystallizes at high temperatures. The effect of different concentrations of sucrose stearate (1 and 10 g kg−1) added as a nonionic emulsifier, to POL-DAG oil containing 800 g kg−1 diacylglycerol, on its physical properties and flow behavior were investigated. The thermal properties of POL-DAG oil in melting, crystallization transition, and onset temperature were significantly decreased (p < 0.05) with the addition of emulsifiers. Besides, the incorporation of emulsifiers also significantly reduced (p < 0.05) the hardness of POL-DAG oil. Moreover, all POL-DAG oils with emulsifiers incorporated exhibited shear-thinning behavior, a low consistency coefficient (K) and a low apparent viscosity. The present study resolves the solidification issue and eases the pourability of POL-DAG oil by the incorporation of sucrose stearate. The process of adding an emulsifier to POL-DAG oil is a simple method that does not require advanced technology or process modifications to manage the POL-DAG oil and thus is highly applicable for the fats and oils industries and palm oil refineries.

Kinetics and Mechanism of Solvent Influence on the Lipase-Catalyzed 1,3-Diolein Synthesis

1,3-Diacylglycerol preparation has roused increasing attention in recent years as the 1,3-diacylglycerol-rich oils can suppress the deposition of visceral fat and prevent the body weight increasing. Lipozyme TL IM-mediated esterification of oleic acid with monoolein was effective for 1,3-diacylglycerol production. During the esterification process, the solvent shows obvious influence on the diolein synthesis as well as the 1,3-diolein production. This work investigated the related kinetics and mechanism of the solvent effect on the esterification and Lipozyme TL IM performance. The results indicated that both the esterification rate constant and the acyl migration rate constant positively correlated with the logP of the solvent, while the site specificity of lipase has negative correlation with solvent logP. The acylation toward the 2-position of 1-monoolein was more sensitive to the solvent logP compared to the 1-position of glycerides. Molecular dynamics simulation revealed that solvents with different logP influenced the structure of Lipozyme TL IM including RMSD, hydrogen bond, and radial distribution function to a large extent, which subsequently led to the catalytic activity and selectivity variation of the lipase.

Effect of Purification Methods on the Physicochemical and Thermodynamic Properties and Crystallization Kinetics of Medium-Chain, Medium-Long-Chain, and Long-Chain Diacylglycerols

Medium-chain diacylglycerol (MCD), medium-long-chain diacylglycerol (MLCD), and long-chain diacylglycerol (LCD) were prepared through enzymatic esterification using different conditions at temperatures of 55-70 °C and reaction times of 1.5-5 h and in the presence of 5-6% Novozym 435. Subsequently, purification was performed using three different techniques, namely, molecular distillation (MD), deodorization (DO), and silica gel column chromatography (SGCC). Variations in terms of the physicochemical and thermodynamic properties, crystallization properties, and kinetics of the diacylglycerols (DAGs) before and after purification were determined. Irrespective of the DAG chain lengths, SGCC was able to produce samples with high DAG purity (96-99 wt %), followed by MD (58-79 wt %) and DO (39-59 wt %). A higher 1,3-DAG/1,2-DAG ratio was recorded for all samples, with the highest ratio recorded for SGCC purified samples. Regardless of the purification techniques used, the solid fat content (SFC) profiles of crude samples with steep curves were altered post-purification, showing a gradual increment in SFC along with increasing temperature. Modification of the Avrami constant and coefficient suggested the modification of the crystal growth mechanism post-purification. Crystallization and melting temperatures of products with a higher DAG purity were shifted to a higher temperature region. Variations were also reflected in terms of the crystal polymorphism, whereby the α and β' crystals transitioned into the more stable β form in purified samples accompanied by modification in the microstructures and crystal sizes. However, there was insignificant change in the morphology of MLCD crystal after purification, except for the decrease in crystal sizes. In conclusion, synthesis of MCD, MLCD, and LCD comprising different DAG purities had distinctive SFC profiles, thermodynamic properties, crystallization kinetics, and crystal morphologies, which can be further incorporated into the preparation of a variety of fat products to obtain end products with desired characteristics.

Immobilized Lipase in the Synthesis of High Purity Medium Chain Diacylglycerols Using a Bubble Column Reactor: Characterization and Application

Novozym^® 435, an immobilized lipase from Candida antarctica B. (CALB), was used as a biocatalyst for the synthesis of high purity medium chain diacylglycerol (MCD) in a bubble column reactor. In this work, the properties of the MCD produced were characterized followed by determining its practical application as an emulsifier in water-in-oil (W/O) emulsion. Two types of MCDs, namely, dicaprylin (C₈-DAG) and dicaprin (C₁₀-DAG), were prepared through enzymatic esterification using the following conditions: 5% Novozym^® 435, 2.5% deionized water, 60°C for 30 min followed by purification. A single-step molecular distillation (MD) (100–140°C, 0.1 Pa, 300 rpm) was performed and comparison was made to that of a double-step purification with MD followed by silica gel column chromatography technique (MD + SGCC). Crude C₈-DAG and C₁₀-DAG with DAG concentration of 41 and 44%, respectively, were obtained via the immobilized enzyme catalyzing reaction. Post-purification via MD, the concentrations of C₈-DAG and C₁₀-DAG were increased to 80 and 83%, respectively. Both MCDs had purity of 99% after the MD + SGCC purification step. Although Novozym^® 435 is a non-specific lipase, higher ratios of 1,3-DAG to 1,2-DAG were acquired. Via MD, the ratios of 1,3-DAG to 1,2-DAG in C₈-DAG and C₁₀-DAG were 5.8:1 and 7.3:1, respectively. MCDs that were purified using MD + SGCC were found to contain 1,3-DAG to 1,2-DAG ratios of 8.8:1 and 9.8:1 in C₈-DAG and C₁₀-DAG, respectively. The crystallization and melting peaks were shifted to higher temperature regions as the purity of the MCD was increased. Dense needle-like crystals were observed in MCDs with high purities. Addition of 5% C₈-DAG and C₁₀-DAG as emulsifier together in the presence of 9% of hydrogenated soybean oil produced stable W/O emulsion with particle size of 18 and 10 μm, respectively.

Synthesis, physicochemical properties, and health aspects of structured lipids: A review

Structured lipids (SLs) refer to a new type of functional lipids obtained by chemically, enzymatically, or genetically modifying the composition and/or distribution of fatty acids in the glycerol backbone. Due to the unique physicochemical characteristics and health benefits of SLs (for example, calorie reduction, immune function improvement, and reduction in serum triacylglycerols), there is increasing interest in the research and application of novel SLs in the food industry. The chemical structures and molecular architectures of SLs define mainly their physicochemical properties and nutritional values, which are also affected by the processing conditions. In this regard, this holistic review provides coverage of the latest developments and applications of SLs in terms of synthesis strategies, physicochemical properties, health aspects, and potential food applications. Enzymatic synthesis of SLs particularly with immobilized lipases is presented with a short introduction to the genetic engineering approach. Some physical features such as solid fat content, crystallization and melting behavior, rheology and interfacial properties, as well as oxidative stability are discussed as influenced by chemical structures and processing conditions. Health-related considerations of SLs including their metabolic characteristics, biopolymer-based lipid digestion modulation, and oleogelation of liquid oils are also explored. Finally, potential food applications of SLs are shortly introduced. Major challenges and future trends in the industrial production of SLs, physicochemical properties, and digestion behavior of SLs in complex food systems, as well as further exploration of SL-based oleogels and their food application are also discussed.