Enzyme-like activity of nanomaterials

Designing Fe8-N2 Catalytic Sites of Nitrogen-Doped Iron-Based Nanoparticles with Oxidase-Like Activity: Characterization, Calculation and Application

Designing metal nanoparticles with oxidase-mimicking capabilities has garnered significant attention due to their promising attributes. However, understanding the intricate catalytic mechanisms underlying these nanoparticles poses a formidable challenge. In this study, a straightforward pyrolysis procedure was employed to synthesize nitrogen-doped iron-based nanoparticles (Fe NPs-N@C) with Fe8-N2 serving as active sites. The confirmation of these sites was thoroughly confirmed through density functional theory (DFT) calculations complemented by experimental validation. The resulting Fe NPs-N@C nanoparticles, averaging 5.45 nm in size, exhibited excellent oxidase-mimicking activity, with vmax=1.11×10-7 M s-1and km=1.67 mM, employing 3,3',5,5'-tetramethylbenzidine as a substrate. The oxidation pathway and catalytic mechanism of Fe NPs-N@C involved 1O2⋅ radicals, validated through electron paramagnetic resonance analysis and DFT calculations. Furthermore, Fe NPs-N@C/TMB system was devised for ascorbic acid and nitrite quantitative detection. This method demonstrated the capability to detect ascorbic acid within concentrations ranging from 1 to 55 μM, with a limit of detection (LOD) of 0.81 μM, and nitrite within concentrations from 1 to 160 μM, with a LOD value of 0.45 μM. These findings offer a comprehensive understanding of the catalytic mechanisms of Fe NPs-N@C nanoparticles at the atomic level, along with its potential for colorimetric sensor in future.

Copper regulation of PtRhRuCu nanozyme targeted boosting peroxidase-like activity for ultrasensitive smartphone-assisted colorimetric sensing of glucose

Point-of-care testing (POCT) is promising for biodetection in home healthcare due to advantages of simplicity, rapidity, low cost, portability, high sensitivity and accuracy, and object-oriented POCT platform can be developed by nanozyme-based biosensing. However, designing high-performance nanozymes with targeted regulated catalytic activity remains challenging. Herein, advanced PtRhRuCu quaternary alloy nanozymes (QANs) were rationally designed and successfully synthesized. Cu atoms induced mechanisms of hydrogen peroxide (H2O2) activation and d-band center regulation, achieving high enhancement of peroxide (POD)-like activity and inhibition of oxidase (OXD)-like activity. Inspired by this, a smartphone-assisted colorimetric platform integrated with test strips was established for glucose detection of soft drinks, with a detection limit of 0.021 mM and a recovery rate of 97.87 to 103.36 %. This work not only provides a novel path for tuning specific enzyme-like activities of metal nanozymes, but also shows the potential feasibility for rational design of POCT sensors in actual samples.

Advances in metal-organic framework-based nanozymes in ROS scavenging medicine

Reactive oxygen species (ROS) play important roles in regulating various physiological functions in the human body, however, excessive ROS can cause serious damage to the human body, considering the various limitations of natural enzymes as scavengers of ROS in the body, the development of better materials for the scavenging of ROS is of great significance to the biomedical field, and nanozymes, as a kind of nanomaterials which can show the activity of natural enzymes. Have a good potential for the development in the area of ROS scavenging. Metal-organic frameworks (MOFs), which are porous crystalline materials with a periodic network structure composed of metal nodes and organic ligands, have been developed with a variety of active nanozymes including catalase-like, superoxide dismutase-like, and glutathione peroxidase-like enzymes due to the adjustability of active sites, structural diversity, excellent biocompatibility, and they have shown a wide range of applications and prospects. In the present review, we first introduce three representative natural enzymes for ROS scavenging in the human body, methods for the detection of relevant enzyme-like activities and mechanisms of enzyme-like clearance are discussed, meanwhile, we systematically summarize the progress of the research on MOF-based nanozymes, including the design strategy, mechanism of action, and medical application, etc. Finally, the current challenges of MOF-based nanozymes are summarized, and the future development direction is anticipated. We hope that this review can contribute to the research of MOF-based nanozymes in the medical field related to the scavenging of ROS.

Facile synthesis of nanoparticles-stacked Co3O4 nanoflakes with catalase-like activity for accelerating wound healing

Delayed wound healing caused by excessive reactive oxygen species (ROS) remains a considerable challenge. In recent years, metal oxide nanozymes have gained significant attention in biomedical research. However, a comprehensive investigation of Co3O4-based nanozymes for enhancing wound healing and tissue regeneration is lacking. This study focuses on developing a facile synthesis method to produce high-stability and cost-effective Co3O4 nanoflakes (NFs) with promising catalase (CAT)-like activity to regulate the oxidative microenvironment and accelerate wound healing. The closely arranged Co3O4 nanoparticles (NPs) within the NFs structure result in a significantly larger surface area, thereby amplifying the enzymatic activity compared to commercially available Co3O4 NPs. Under physiological conditions, it was observed that Co3O4 NFs efficiently break down hydrogen peroxide (H2O2) without generating harmful radicals (·OH). Moreover, they exhibit excellent compatibility with various cells involved in wound healing, promoting fibroblast growth and protecting cells from oxidative stress. In a rat model, Co3O4 NFs facilitate both the hemostatic and proliferative phases of wound healing, consequently accelerating the process. Overall, the promising results of Co3O4 NFs highlight their potential in promoting wound healing and tissue regeneration.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

Peroxidase mimicking activity of Saccharum officinarum L. capped gold nanoparticles using o-dianisidine as a substrate

In this study, a biogenic method is reported for the fabrication of gold nanoparticles (Au NPs) using Saccharum officinarum L. (SOL) and studied the peroxidase mimicking activity using o-dianisidine (ODA) as a substrate.

Plasmon-Enhanced Bimodal Nanosensors: An Enzyme-Free Signal Amplification Strategy for Ultrasensitive Detection of Pathogens

Increasing foodborne illnesses have led to global health and economic burdens. E. coli O157:H7 is one of the most common disease-provoking pathogens and known to be lethal Shiga toxin-producing E. coli (STEC) strains. With a low infection dose in addition to person-to-person transmission, STEC infections are easily spread. As a result, specific and rapid testing methods to identify foodborne pathogens are urgently needed. Nanozymes have emerged as enzyme-mimetic nanoparticles, demonstrating intrinsic catalytic activity that could allow for rapid, specific, and accurate pathogen identification in the agrifood industry. In this study, we developed a sensitive nanoplatform based on the traditional ELISA assay with the synergistic properties of gold and iron oxide nanozymes, replacing the conventional enzyme horseradish peroxidase (HRP). We designed an easily interchangeable sandwich ELISA composed of a novel, multifunctional magneto-plasmonic nanosensor (MPnS) with target antibodies (MPnS-Ab). Our experiments demonstrate a 100-fold increase in catalytic activity in comparison to HRP with observable color changes within 15 min. Results further indicate that the MPnS-Ab is highly specific for E. coli O157:H7. Additionally, effective translatability of catalytic activity of the MPnS technology in the lateral flow assay (LFA) platform is also demonstrated for E. coli O157:H7 detection. As nanozymes display more stability, tunable activity, and multi-functionality than natural enzymes, our platform could provide customizable, low-cost assay that combines high specificity with rapid detection for a variety of pathogens in a point-of-care setup.

Recent Advances in Nano-Formulations for Skin Wound Repair Applications

Skin injuries caused by accidents and acute or chronic diseases place a heavy burden on patients and health care systems. Current treatments mainly depend on preventing infection, debridement, and hemostasis and on supplementing growth factors, but patients will still have scar tissue proliferation or difficulty healing and other problems after treatment. Conventional treatment usually focuses on a single factor or process of wound repair and often ignores the influence of the wound pathological microenvironment on the final healing effect. Therefore, it is of substantial research value to develop multifunctional therapeutic methods that can actively regulate the wound microenvironment and reduce the oxidative stress level at the wound site to promote the repair of skin wounds. In recent years, various bioactive nanomaterials have shown great potential in tissue repair and regeneration due to their properties, including their unique surface interface effect, small size effect, enzyme activity and quantum effect. This review summarizes the mechanisms underlying skin wound repair and the defects in traditional treatment methods. We focus on analyzing the advantages of different types of nanomaterials and comment on their toxicity and side effects when used for skin wound repair.

Boosting the peroxidase-like activity of Pt nanozymes by a synergistic effect of Ti3C2 nanosheets for dual mechanism detection

Nanozymes show great promise in bioanalysis and therapeutics, which largely rely on high catalytic efficiency and selectivity. Inspired by the interfacial electronic interaction between noble metals and transition metal carbides, Pt nanozymes are modified with Ti₃C₂ MXene nanosheets to construct Ti₃C₂/Pt hybrids with synergistically enhanced catalytic activity. Although Ti₃C₂ does not have oxidase and peroxidase-like activity, it can greatly selectively enhance the peroxidase-like activity of Pt nanozymes. Near-infrared irradiation can further increase specifically the peroxidase-like activity of Ti₃C₂/Pt. The optimal peroxidase-like activity of Ti₃C₂/Pt is 6 times higher than Pt in the dark and 7.9 times higher than Pt under illumination. This catalytic enhancement is attributed to the interplay of the strong interfacial electron effect and unique photothermal effect of Ti₃C₂. Using the superior peroxidase-like activity of Ti₃C₂/Pt, dual mechanism colorimetric methods based on cascade reaction and inhibitory effect are developed for specific detection of glucose and glutathione with a limit of detection of 1.0 μM and 0.0089 μM, respectively. Our work provides an effective means to improve the catalytic activity and selectivity of nanozymes by introduction of an ideal supporter, which will be of value for the design of efficient nanozymes.

Nanoparticle Effects on Stress Response Pathways and Nanoparticle-Protein Interactions

Nanoparticles (NPs) are increasingly used in a wide variety of applications and products; however, NPs may affect stress response pathways and interact with proteins in biological systems. This review article will provide an overview of the beneficial and detrimental effects of NPs on stress response pathways with a focus on NP-protein interactions. Depending upon the particular NP, experimental model system, and dose and exposure conditions, the introduction of NPs may have either positive or negative effects. Cellular processes such as the development of oxidative stress, the initiation of the inflammatory response, mitochondrial function, detoxification, and alterations to signaling pathways are all affected by the introduction of NPs. In terms of tissue-specific effects, the local microenvironment can have a profound effect on whether an NP is beneficial or harmful to cells. Interactions of NPs with metal-binding proteins (zinc, copper, iron and calcium) affect both their structure and function. This review will provide insights into the current knowledge of protein-based nanotoxicology and closely examines the targets of specific NPs.

Enhancing enzymatic activity of Mn@Co3O4 nanosheets as mimetic nanozyme for colorimetric assay of ascorbic acid

In nanozyme-based assays, increasing enzymatic activity is very desirable for enhancing sensitivity and lowering the detection limit. In this study, novel Mn doped cobalt oxide nanosheets (Mn@Co₃O₄ NSs) were synthesized by hydrothermal process. The obtained Mn@Co₃O₄ possessed enhanced dual-enzyme mimetic, oxidase and peroxidase, and can catalytically oxidize of 3, 3', 5, 5'-tetramethylbenzidine (TMB), to a blue product of oxidized TMB. The enzyme kinetics were well-described mathematically using a common Michaelis-Menten and Lineweaver Burk model. The enzyme kinetics constant (K_m) was found to be 0.15 mM, which is relatively low comparing with pure Co₃O₄ nanosheets (0.35 mM) and natural enzyme HRP (0.434 mM). Therefore, the efficient colorimetric method was achieved for determination of H₂O₂ and ascorbic acid. The limit of detection (LOD) of H₂O₂ was 8.0 μM and the linear range was 20-200 μM based on direct turn on of the peroxidase-like activity of Mn@Co₃O₄. While, for ascorbic acid detection based on turn-off approach, the linearity range for the ascorbic acid was 1-8 μM with LOD of 0.4 μM. Moreover, the colorimetric system exhibited good stability and selectivity toward the detection of ascorbic acid effectively in real samples (vitamin C tablets) with satisfactorily accuracy and precision.

Synthesis of Gold-Platinum Core-Shell Nanoparticles Assembled on a Silica Template and Their Peroxidase Nanozyme Properties

Bimetallic nanoparticles are important materials for synthesizing multifunctional nanozymes. A technique for preparing gold-platinum nanoparticles (NPs) on a silica core template (SiO₂@Au@Pt) using seed-mediated growth is reported in this study. The SiO₂@Au@Pt exhibits peroxidase-like nanozyme activity has several advantages over gold assembled silica core templates (SiO₂@Au@Au), such as stability and catalytic performance. The maximum reaction velocity (V_max) and the Michaelis–Menten constants (K_m) were and 2.1 × 10⁻¹⁰ M⁻¹∙s⁻¹ and 417 µM, respectively. Factors affecting the peroxidase activity, including the quantity of NPs, solution pH, reaction time, and concentration of tetramethyl benzidine, are also investigated in this study. The optimization of SiO₂@Au@Pt NPs for H₂O₂ detection obtained in 0.5 mM TMB; using 5 µg SiO₂@Au@Pt, at pH 4.0 for 15 min incubation. H₂O₂ can be detected in the dynamic liner range of 1.0 to 100 mM with the detection limit of 1.0 mM. This study presents a novel method for controlling the properties of bimetallic NPs assembled on a silica template and increases the understanding of the activity and potential applications of highly efficient multifunctional NP-based nanozymes.

Electrochemical sensors based on metal nanoparticles with biocatalytic activity

Biosensors have attracted a great deal of attention, as they allow for the translation of the standard laboratory-based methods into small, portable devices. The field of biosensors has been growing, introducing innovations into their design to improve their sensing characteristics and reduce sample volume and user intervention. Enzymes are commonly used for determination purposes providing a high selectivity and sensitivity; however, their poor shelf-life is a limiting factor. Researchers have been studying the possibility of substituting enzymes with other materials with an enzyme-like activity and improved long-term stability and suitability for point-of-care biosensors. Extra attention is paid to metal and metal oxide nanoparticles, which are essential components of numerous enzyme-less catalytic sensors. The bottleneck of utilising metal-containing nanoparticles in sensing devices is achieving high selectivity and sensitivity. This review demonstrates similarities and differences between numerous metal nanoparticle-based sensors described in the literature to pinpoint the crucial factors determining their catalytic performance. Unlike other reviews, sensors are categorised by the type of metal to study their catalytic activity dependency on the environmental conditions. The results are based on studies on nanoparticle properties to narrow the gap between fundamental and applied research. The analysis shows that the catalytic activity of nanozymes is strongly dependent on their intrinsic properties (e.g. composition, size, shape) and external conditions (e.g. pH, type of electrolyte, and its chemical composition). Understanding the mechanisms behind the metal catalytic activity and how it can be improved helps designing a nanozyme-based sensor with the performance matching those of an enzyme-based device.

Accelerated discovery of superoxide-dismutase nanozymes via high-throughput computational screening

The activity of nanomaterials (NMs) in catalytically scavenging superoxide anions mimics that of superoxide dismutase (SOD). Although dozens of NMs have been demonstrated to possess such activity, the underlying principles are unclear, hindering the discovery of NMs as the novel SOD mimics. In this work, we use density functional theory calculations to study the thermodynamics and kinetics of the catalytic processes, and we develop two principles, namely, an energy level principle and an adsorption energy principle, for the activity. The first principle quantitatively describes the role of the intermediate frontier molecular orbital in transferring electrons for catalysis. The second one quantitatively describes the competition between the desired catalytic reaction and undesired side reactions. The ability of the principles to predict the SOD-like activities of metal-organic frameworks were verified by experiments. Both principles can be easily implemented in computer programs to computationally screen NMs with the intrinsic SOD-like activity.

A Melanin-like Nanoenzyme for Acute Lung Injury Therapy via Suppressing Oxidative and Endoplasmic Reticulum Stress Response

Nanoenzyme-mediated catalytic activity is emerging as a novel strategy for reactive oxygen species (ROS) scavenging in acute lung injury (ALI) treatment. However, one of the main hurdles for these metal-containing nanoenzymes is their potential toxicity and single therapeutic mechanism. Herein, we uncovered a melanin-like nanoparticles derived from the self-polymerization of 1,8-dihydroxynaphthalene (PDH nanoparticles), showing a significant anti-inflammation therapeutic effect on ALI mice. The prepared PDH nanoparticles rich in phenol groups could not only act as radical scavengers to alleviate oxidative stress but could also chelate calcium overload to suppress the endoplasmic reticulum stress response. As revealed by the therapeutic effect in vivo, PDH nanoparticles significantly prohibited neutrophil infiltration and the secretion of proinflammatory cytokines (TNF-α and IL-6), thus improving the inflammatory cascade in the ALI model. Above all, our work provides an effective anti-inflammatory nanoplatform by using the inherent capability of melanin-like nanoenzymes, proposing the potential application prospects of these melanin-like nanoparticles for acute inflammation-induced injury treatment.

PTFE-Carbon Nanotubes and Lipase B from Candida antarctica-Long-Lasting Marriage for Ultra-Fast and Fully Selective Synthesis of Levulinate Esters

An effective method for levulinic acid esters synthesis by the enzymatic Fischer esterification of levulinic acid using a lipase B from Candida antarctica (CALB) immobilized on the advanced material consisting of multi-wall carbon nanotubes (MWCNTs) and a hydrophobic polymer—polytetrafluoroethylene (Teflon, PTFE)—as a heterogeneous biocatalyst, was developed. An active phase of the biocatalyst was obtained by immobilization via interfacial activation on the surface of the hybrid material MWCNTs/PTFE (immobilization yield: 6%, activity of CALB: 5000 U∙L∙kg⁻¹, enzyme loading: 22.5 wt.%). The catalytic activity of the obtained biocatalyst and the effects of the selected reaction parameters, including the agitation speed, the amount of PTFE in the CALB/MWCNT-PTFE biocatalyst, the amount of CALB/MWCNT-PTFE, the type of organic solvent, n-butanol excess, were tested in the esterification of levulinic acid by n-butanol. The results showed that the use of a two-fold excess of levulinic acid to n-butanol, 22.5 wt.% of CALB on MWCNT-PTFE (0.10 wt.%) and cyclohexane as a solvent at 20 °C allowed one to obtain n-butyl levulinate with a high yield (99%) and selectivity (>99%) after 45 min. The catalyst retained its activity and stability after three cycles, and then started to lose activity until dropping to a 69% yield of ester in the sixth reaction run. The presented method has opened the new possibilities for environmentally friendly synthesis of levulinate esters.

Gastric Acid Powered Nanomotors Release Antibiotics for In Vivo Treatment of Helicobacter pylori Infection

Helicobacter pylori (H. pylori) infection has ≈75% probability of causing gastric cancer, so it is considered to be the strongest single risk factor for gastric malignancies. However, the harsh gastric acid environment has created obstacles to medical treatment. This work reports a nanomotor with a bottle-shaped container that can be loaded with small molecules of clarithromycin, nano calcium peroxide (CaO₂ ), and Pt nanoparticles (Pt NPs) by ultrasound. Nanomotors can quickly consume gastric acid through the chemical reaction of CaO₂ to temporarily neutralize gastric acid. The product hydrogen peroxide (H₂ O₂ ) is catalytically decomposed into a large amount of oxygen (O₂ ) by Pt NPs. The local concentration gradient of O₂ bubbles causes it to be expelled from the nanobottles through a narrow opening, and then push the nanobottles forward to provide maximum release and prodrug efficacy. Experiments in animal models show that 15 mg nanomotors can safely and quickly neutralize gastric acid in the stomach and simultaneously release prodrugs to achieve good therapeutic effects without causing acute toxicity. H. pylori burden in mice was 2.6 orders of magnitude lower than that in the control group. The stomach returns to normal pH within 1 d after administration.

Pt Nanoparticles Confined by Zirconium Metal-Organic Frameworks with Enhanced Enzyme-like Activity for Glucose Detection

Metal nanozymes hold promise for chemical and biological applications, and their implementation relies on high catalytic efficiency and stability. Using the metal-organic framework as an ideal carrier for well-dispersed ultra-small metal nanoparticles (NPs) is beneficial for improving the catalytic efficiency of nanozymes. In this study, a zirconium-based metal organic framework (UiO-66) with good chemical stability and high porosity was synthesized and used to construct Pt/UiO-66 nanocomposites. The percentage of Pt in UiO-66 can be tuned easily by adjusting the feeding amount of PtCl4 2-. Because of the confinement effect of mesopores, the Pt particles with an average diameter of 3.8 nm are formed and dispersed throughout the pores of the UiO-66 particle. The Pt/UiO-66 composites show efficient oxidase- and peroxidase-like activity. Both the oxidase- and peroxidase-like activities are dependent on the Pt percentage. Pt/UiO-66-6% exhibits enhanced peroxidase-like activity, ∼3.9 times higher than that of commercial Pt/C with 10 wt % Pt. We propose that the construction of Pt/UiO-66 increased the utilization efficiency and stability of Pt NPs and provided more active sites for catalytic reactions. Using the peroxidase-like activity of Pt/UiO-66, a colorimetric method that can be used for actual blood glucose detection was developed for the specific detection of glucose with a limit of detection of 0.033 mM.

Photo-enhanced enzyme-like activities of BiOBr/PtRu hybrid nanostructures

The combination of semiconductor and metal nanocomponents represents an effective way for design of photocatalysts with high efficiency. It is expected that this strategy can be applied to design photo-regulated nanozymes. To prove this concept, BiOBr/PtRu hybrid nanostructures have been fabricated by depositing PtRu nanoparticles on BiOBr nanosheets through a templating co-reduction method. The formation of BiOBr/PtRu hybrid nanostructures was confirmed by TEM, XRD and XPS. BiOBr/PtRu hybrid nanostructures exhibited excellent enzyme-like activities (peroxidase, oxidase, ferroxidase) as well as the ability to scavenge DPPH free radicals. When exposed to light irradiation (λ > 420 nm), it was found that BiOBr/PtRu hybrid nanostructures not only exhibit improved photocatalytic degradation, but also exhibit enhanced peroxidase- and oxidase-like activity. Due to the photocatalytic effect and the higher charge separation and utilization efficiency caused by heterojunctions, a light-enhanced enzyme-like activity mechanism was proposed. These results will be of value to design high efficiency nanozymes using light for biological and environmental applications.

Visualization nanozyme based on tumor microenvironment "unlocking" for intensive combination therapy of breast cancer

Nanozymes as artificial enzymes that mimicked natural enzyme-like activities have received great attention in cancer therapy. However, it remains a great challenge to design nanozymes that precisely exert its activity in tumor without producing off-target toxicity to surrounding normal tissues. Here, we report a synergetic enhancement strategy through the combination between nanozyme and tumor vascular normalization to destruct tumors, which was based on tumor microenvironment (TME) "unlocking." This nanozyme that we developed not only has photothermal properties but also can produce reactive oxygen species efficiently under the stimulation of TME. Moreover, this nanozyme also showed remarkable imaging performance in fluorescence imaging in the second near-infrared region and magnetic resonance imaging for visualization tracing in vivo. The process of combination therapy showed remarkable therapeutic effect for breast cancer. This study provides a therapeutic strategy by the cooperation between multifunctional nanozyme and tumor vascular normalization for intensive combination therapy of breast cancer.

Simple and label-free strategy for terminal transferase assay using a personal glucose meter

We herein developed a simple personal glucose meter (PGM)-based method for terminal transferase (TdT) activity assay by utilizing the glucose oxidase (GOx)-mimicking activity of cerium oxide nanoparticles (CeO₂ NPs). Using this strategy, the TdT activity was reliably determined down to 0.7 U mL^-1 with high selectivity against other non-specific enzymes.

Preparation of a Copper Polyphosphate Kinase Hybrid Nanoflower and Its Application in ADP Regeneration from AMP

In this research article, we reported a self-assembly approach to prepare a copper polyphosphate kinase 2 hybrid nanoflower and established a cofactor ADP regeneration system from AMP using the nanoflower. First, the structure of the hybrid nanoflower was confirmed by scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy, which indicated the successful loading of the enzyme in the hybrid nanoflower. Moreover, compared to the free enzyme, the hybrid nanoflower exhibited a better performance in ADP production and possessed wider catalytic pH and temperature ranges as well as improved storage stability. The hybrid nanoflower also exhibited well reusability, preserving 71.7% of initial activity after being used for ten cycles. In addition, the phosphorylation of glucose was conducted by utilizing ADP-dependent glucokinase coupled with the ADP regeneration system, in which the hybrid nanoflower was used for regenerating ADP from AMP. It was observed that the ADP regeneration system operated effectively at a very small amount of AMP. Thus, the hybrid nanoflower had great application potential in industrial catalytic processes that were coupled with ADP-dependent enzymes.

Glucose oxidase-like activity of cerium oxide nanoparticles: use for personal glucose meter-based label-free target DNA detection

Recently, personal glucose meter (PGM) has been utilized for the detection of non-glucose targets for point-of-care (POC) testing. Aimed at this goal, we herein developed a new PGM-based label-free read-out method for polymerase chain reaction (PCR) based on our novel finding that cerium oxide nanoparticles (CeO2 NPs) exhibit glucose oxidase-like activity comparable to the natural glucose oxidase enzyme. Methods: In principle, DNA amplicons produced by PCR in the presence of target DNA electrostatically bind to CeO2 NPs, leading to their aggregation and reducing the efficiency for CeO2 NP-catalyzed glucose oxidation reaction. Thus, glucose is hardly oxidized to gluconic acid, resulting in the maintenance of initial high glucose level. On the contrary, in the absence of target DNA or presence of non-target DNA, DNA amplicons are not produced and glucose is effectively oxidized by the glucose oxidase-like activity of CeO2 NPs, leading to the significant reduction of glucose level. Finally, the resulting glucose level is simply measured by using PGM. Results: With this strategy, DNA amplicons were quantitatively examined within 5 min, realizing ultrafast analysis of PCR results without any cumbersome and labor-intensive procedures. In addition, the target genomic DNA derived from Escherichia coli (E. coli) was sensitively determined down to 10 copies with high selectivity. Conclusion: Importantly, the use of PGM as a detection component enables its direct application in POC settings. Based on the meritorious features of PGM such as rapidity, simplicity, and cost-effectiveness, we expect that the devised system could serve as a core platform for the on-site read-out of PCR amplification.

An ultrasensitive label-free colorimetric biosensor for the detection of glucose based on glucose oxidase-like activity of nanolayered manganese-calcium oxide

During the last years, enzyme-based biosensors have gained much more attention among the researchers and have had great success in the determination of different biological macromolecules. Nanomaterials with intrinsic enzyme-mimic activity are widely used in biomedicine as artificial enzymes. Here, we report glucose oxidase-mimic activity of nanolayered manganese-calcium (Mn-Ca) oxide nanoparticles (NL-MnCaO₂). In this work, NL-MnCaO₂nanoparticles were synthesized and characterized using different techniques including transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier-transform infrared spectroscopy (FTIR) and powder X-ray diffraction (XRD). Also, the ability of these compounds for the glucose and hydrogen peroxide (H₂O₂) determination was investigated. A non-enzymatic strategy for the colorimetric detection of glucose and H₂O₂ was reported which can be utilized not only for the rapid detection and analysis of glucose by the naked eye but also the quantitative assay of glucose by spectrophotometry. The in situ generated H₂O₂ and gluconic acid (GA) from the oxidation of glucose through the glucose oxidase-mimicking activity of NL-MnCaO₂ was detected using a colorimetric method. Also, the results confirmed the application of these compounds for the detection of glucose in human serum samples with a detection limit (LOD) of 6.12 × 10^-6 M. The results showed that NL-MnCaO₂ can be used as an alternative for the natural enzymes and act as a simple, sensitive and enzyme-free biosensor for the detection of glucose in real samples. The proposed strategy shows some advantages including sensitivity, short detection time and low detection limit.

Test-System for Bacteria Sensing Based on Peroxidase-Like Activity of Inkjet-Printed Magnetite Nanoparticles

Rapid detection of bacterial contamination is an essential task in numerous medical and technical processes and one of the most rapidly developing areas of nano-based analytics. Here, we present a simple-to-use and special-equipment-free test-system for bacteria detection based on magnetite nanoparticle arrays. The system is based on peroxide oxidation of chromogenic substrate catalyzed by magnetite nanoparticles, and the process undergoes computer-aided visual analysis. The nanoparticles used had a pristine surface free of adsorbed molecules and demonstrated high catalytic activities up to 6585 U/mg. The catalytic process showed the Michaelis–Menten kinetic with K_m valued 1.22 mmol/L and V_max of 4.39 µmol/s. The nanoparticles synthesized were used for the creation of inkjet printing inks and the design of sensor arrays by soft lithography. The printed sensors require no special equipment for data reading and showed a linear response for the detection of model bacteria in the range of 10⁴–10⁸ colony-forming units (CFU) per milliliter with the detection limit of 3.2 × 10³ CFU/mL.

Regulating the pro- and anti-oxidant capabilities of bimetallic nanozymes for the detection of Fe2+ and protection of Monascus pigments

The emerging properties of mimicking enzymes open up new horizons for nanomaterials. Regulating their enzyme-like activity and exploiting their applications are currently the hot topics for nanozymes. Among their activities, the pro-oxidant and antioxidant capabilities of nanozymes are important to determine their unique physiological functions. In this paper, we demonstrate that PtRu NPs exhibit multiple enzyme-like activities (e.g. peroxidase, oxidase, ferroxidase, catalase and SOD) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity. The PtRu bimetallic nanozymes therefore show pro-oxidant and anti-oxidant functions. It was found that the enzyme-like activities of PtRu NPs are highly dependent on the Pt/Ru molar ratio and show a similar trend in the order of activity: Pt₉₀Ru₁₀ > Pt₇₅Ru₂₅ > Pt > Pt₄₀Ru₆₀, indicating that proper alloying of Pt with Ru can enhance both pro- and anti-oxidant capabilities. By employing the ferroxidase-like activity and catalase-like activity, we verified the applications of PtRu nanozymes in the detection of Fe²⁺ ions, and tried for the first time to protect Monascus pigments (MPs) from hydrogen peroxide oxidation. These results not only provide an effective way to optimize the pro- and anti-oxidant capabilities of nanozymes, but also provide prospects for the applications of nanozymes in protecting biologically active natural products.

Robust magnetic laccase-mimicking nanozyme for oxidizing o-phenylenediamine and removing phenolic pollutants

In this study, we report a novel magnetic biomimetic nanozyme (Fe₃O₄@Cu/GMP (guanosine 5'-monophosphate)) with high laccase-like activity, which could oxidize toxic o-phenylenediamine (OPD) and remove phenolic compounds. The magnetic laccase-like nanozyme was readily obtained via complexed Cu²⁺ and GMP that grew on the surface of magnetic Fe₃O₄ nanoparticles. The prepared Fe₃O₄@Cu/GMP catalyst could be magnetically recycled for at least five cycles while still retaining above 70% activity. As a laccase mimic, Fe₃O₄@Cu/GMP had more activity and robust stability than natural laccase for the oxidization of OPD. Fe₃O₄@Cu/GMP retained about 90% residual activity at 90°C and showed little change at pH 3-9, and the nanozyme kept its excellent activity after long-term storage. Meanwhile, Fe₃O₄@Cu/GMP had better activity for removing phenolic compounds, and the removal of naphthol was more than 95%. Consequently, the proposed Fe₃O₄@Cu/GMP nanozyme shows potential for use as a robust catalyst for applications in environmental remediation.

Fe3O4 Nanoparticles Attenuated Salmonella Infection in Chicken Liver Through Reactive Oxygen and Autophagy via PI3K/Akt/mTOR Signaling

Recently nanomaterials have received substantial attention in biotechnology areas for their innovative properties in physical and chemical function. One of the most arrestive properties of nanomaterials that has been reported is their bacteriostatic activity. Our previous research found that Fe3O4 magnetic nanoparticles (Fe3O4-NPs) could effectively reduce the viability of intracellular Salmonella Enteritidis in chicken cells. There is an essential need to explore whether the bacteriostatic activity of Fe3O4-NPs is available in vivo. As an extension of this research, we conducted the present study to investigate the potential effect of Fe3O4-NPs used for S. Enteritidis control in chickens and to extensively investigate the underlying mechanisms in the process. The overall study included the evaluation of pathological sections, antioxidant status, inflammation, and the autophagy status of chicken liver, including the signaling pathway involved in the process. Results indicated that Fe3O4-NPs pretreatment can effectively inhibit the invasion of S. Enteritidis in chicken liver. Fe3O4-NPs pretreatment significantly increased reactive oxygen species (ROS) generation in chickens, including antioxidant enzyme activities. S. Enteritidis infection significantly increased the protein expression of the autophagy marker LC3. Additionally, the inflammation response and pathological changes caused by S. Enteritidis infection were alleviated by Fe3O4-NPs pretreatment. Phosphorylated mTOR was significantly increased in S. Enteritidis infected chickens, but showed no difference in chickens pretreated with Fe3O4-NPs. In summary, the results demonstrated that ROS and autophagy were involved in the inhibition of S. Enteritidis in chickens by Fe3O4-NPs pretreatment. The redox balance and inflammation response appeared normal in the process, as did the expression of the PI3K/Akt/mTOR signaling pathways. Taken together, our research demonstrate that the bacteriostatic activity of Fe3O4-NPs in chickens is avaliable and safe, which can be an alternative to antibiotics for bacterial inhibition in poultry industry.

Janus nanozyme–drug nanosystems for synergistic anti-inflammatory treatment of nasal polyps

The multifunctional Au–CeO₂ JNPs as a nanozyme–drug nanosystem have been first explored for CT imaging and synergistic anti-inflammatory treatment of nasal polyps.

A Non-Enzymatic Sensor Based on Trimetallic Nanoalloy with Poly (Diallyldimethylammonium Chloride)-Capped Reduced Graphene Oxide for Dynamic Monitoring Hydrogen Peroxide Production by Cancerous Cells

Catching cancer at an early stage is necessary to make it easier to treat and to save people's lives rather than just extending them. Reactive oxygen species (ROS) have sparked a huge interest owing to their vital role in various biological processes, especially in tumorigenesis, thus leading to the potential of ROS as prognostic biomarkers for cancer. Herein, a non-enzymatic biosensor for the dynamic monitoring of intracellular hydrogen peroxide (H2O2), the most important ROS, via an effective electrode composed of poly (diallyldimethylammonium chloride) (PDDA)-capped reduced graphene oxide (RGO) nanosheets with high loading trimetallic AuPtAg nanoalloy, is proposed. The designed biosensor was able to measure H2O2 released from different cancerous cells promptly and precisely owing to the impressive conductivity of RGO and PDDA and the excellent synergistic effect of the ternary alloy in boosting the electrocatalytic activity. Built upon the peroxidase-like activity of the nanoalloy, the developed sensor exhibited distinguished electrochemical performance, resulting in a low detection limit of 1.2 nM and a wide linear range from 0.05 μM to 5.5 mM. Our approach offers a significant contribution toward the further elucidation of the role of ROS in carcinogenesis and the effective screening of cancer at an early stage.

Protein-protected metal nanoclusters: An emerging ultra-small nanozyme

Protein-protected metal nanoclusters (MNCs), typically consisting of several to a hundred metal atoms with a protein outer layer used for protecting clusters from aggregation, are excellent fluorescent labels for biomedical applications due to their extraordinary photoluminescence, facile synthesis and good biocompatibility. Interestingly, many protein-protected MNCs have also been reported to exhibit intrinsic enzyme-like activities, namely peroxidase, oxidase and catalase activities, and are consequently used for biological analysis and environmental treatment. These findings have extended the horizon of protein-protected MNCs' properties as well as their application in various fields. Furthermore, in the field of nanozymes, protein-protected MNCs have emerged as an outstanding new addition. Due to their ultra-small size (<2 nm), they usually have higher catalytic activity, more suitable size for in vivo application, better biocompatibility and photoluminescence in comparison with large size nanozymes. In this review, we will systematically introduce the significant advances in this field and critically discuss the challenges that lie ahead. Ultra-small nanozymes based on protein-protected MNCs are on the verge of attracting great interest across various disciplines and will stimulate research in the fields of nanotechnology and biology. This article is characterized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Biology-Inspired Nanomaterials > Protein and Virus-Based Structures.

Simultaneous enzyme mimicking and chemical reduction mechanisms for nanoceria as a bio-antioxidant: a catalytic model bridging computations and experiments for nanozymes

The bio-antioxidant ability of nanoceria has been mainly ascribed to its ability to mimic superoxide dismutase (SOD) and catalase (CAT), and its mechanisms are thought to be analogous to those of the natural enzymes. Accordingly, nanoceria has been called a nanozyme, a nanomaterial mimicking enzymes. Because they overlook the real structural features of nanoceria, these hypothetical mechanisms cannot explain the important antioxidant experiments of nanoceria and have little predictive power. We hereby study the O₂˙^- and H₂O₂ scavenging mechanisms of nanoceria using first principles calculations, taking into account the role of oxygen vacancies that are practically abundant in nanoceria. The results reveal atomistic-level mechanisms responsible for the SOD and CAT mimetic activities of nanoceria. The newly created surface defect states in the electronic band structures of the shortly-lived intermediate species, called transient surface defect states (TSDSs), play critical roles in the enzyme mimetic catalysis and can serve as the bridge between computations and experiments at the atomistic level. The energy levels of TSDSs, which depend on the concentration and distribution of oxygen vacancies, determine whether the nanoceria is eligible for the catalysis. Besides the known enzyme mimicking mechanisms, the non-catalytic chemical reduction mechanisms are also responsible for the scavenging of O₂˙^- and H₂O₂, in which nanoceria serves as a reducing agent rather than a catalyst. The chemical reduction pathways poison the active sites of nanoceria which serve to mimic SOD and thus deteriorate its SOD mimetic activity. The results provide guidance for the engineering of nanoceria for bio-antioxidant applications. In particular, the proposed catalytic model can be generalized for the screening and design of high-performance nanozymes based on semiconductor nanomaterials.

Recent Technological Advances in the Mass Spectrometry-based Nanomedicine Studies: An Insight from Nanoproteomics

Nanoscience becomes one of the most cutting-edge research directions in recent years since it is gradually matured from basic to applied science. Nanoparticles (NPs) and nanomaterials (NMs) play important roles in various aspects of biomedicine science, and their influences on the environment have caused a whole range of uncertainties which require extensive attention. Due to the quantitative and dynamic information provided for human proteome, mass spectrometry (MS)-based quantitative proteomic technique has been a powerful tool for nanomedicine study. In this article, recent trends of progress and development in the nanomedicine of proteomics were discussed from quantification techniques and publicly available resources or tools. First, a variety of popular protein quantification techniques including labeling and label-free strategies applied to nanomedicine studies are overviewed and systematically discussed. Then, numerous protein profiling tools for data processing and postbiological statistical analysis and publicly available data repositories for providing enrichment MS raw data information sources are also discussed.

AuCu bimetal nanoclusters as high-performance mimics for ultrasensitive recognition of biomolecules

Introducing novel mimic materials as alternatives for natural enzymes challenges the analysts. Study on the peroxidase-like materials is an active field in analytical research areas. Herein, Au/Cu bimetal nanoclusters (Au/Cu NCs) are introduced as highly efficient peroxidase mimics, which were investigated using fluorometric and colorimetric techniques. A comprehensive comparison between the catalytic activity of Au, Cu, and their bimetal NCs, with different ratios of Au/Cu was performed using some different peroxidase substrates (including 3,3′,5,5′-tetramethylbenzidine (TMB), o-phenylenediamine dihydrochloride (OPD), and terephthalic acid (TA)). Additionally, different capping agents were applied for the synthesis of NCs, and it was found that penicillamine-capped NCs with 50% Cu have higher activity than other synthesized NCs. Analytical application of the novel mimic for H2O2 detection caused a linear calibration in a wide linear range of 0.001–3 μmol/L, and a great detection limit (3S) of 0.18 nmol/L, using a sensitive fluorescence system. The developed system was also sensitive for recognizing glucose and cholesterol in blood samples, after their enzymatic oxidation and production of H2O2. Detection limits of 55 and 15 nmol/L were obtained for glucose and cholesterol, respectively. The presented method also showed good reliability, which was validated by certified reference materials.

Colorimetric method for glucose detection with enhanced signal intensity using ZnFe2O4-carbon nanotube-glucose oxidase composite material

In this paper, a composite material comprised of ZnFe2O4 nanomaterial, carbon nanotubes (CNT) and glucose oxidase (GOD) was synthesized and used for glucose detection. ZnFe2O4-CNT was formed by a one-step solvothermal approach using acid-treated CNT as precursor, then GOD was linked to it by coupling reaction between -NH2 and -COOH. After addition of glucose, which is oxidized by GOD, the intermediate product (H2O2) further oxidizes the 3,3',5,5'-tetramethylbenzidine (TMB) substrate and forms a blue product. This process was accelerated in the presence of peroxidase-mimic ZnFe2O4 nanomaterial and the detected signal intensity was correspondingly enhanced. The linear detection range of glucose was 0.8 to 250 μM, with a limit of detection of 0.58 μM. This may originate from (1) the limited diffusion of intermediate species, which resulted in enhanced local concentrations of reaction compounds; (2) enhanced electron transmission among CNT, GOD and ZnFe2O4; (3) the synergistic enhancement of catalytic activity of ZnFe2O4 compared with other metal oxides; (4) the high loading capacity of ZnFe2O4-CNT for GOD molecules, because of its high surface-to-volume ratio. Meanwhile, this method has reasonable selectivity, stability and reusability and can be used for real serum detection, which may be useful for the development of sensitive biosensors.

Modified carbon nitride nanozyme as bifunctional glucose oxidase-peroxidase for metal-free bioinspired cascade photocatalysis

Nanomaterials-based biomimetic catalysts with multiple functions are necessary to address challenges in artificial enzymes mimicking physiological processes. Here we report a metal-free nanozyme of modified graphitic carbon nitride and demonstrate its bifunctional enzyme-mimicking roles. With oxidase mimicking, hydrogen peroxide is generated from the coupled photocatalysis of glucose oxidation and dioxygen reduction under visible-light irradiation with a near 100% apparent quantum efficiency. Then, the in situ generated hydrogen peroxide serves for the subsequent peroxidase-mimicking reaction that oxidises a chromogenic substrate on the same catalysts in dark to complete the bifunctional oxidase-peroxidase for biomimetic detection of glucose. The bifunctional cascade catalysis is successfully demonstrated in microfluidics for the real-time colorimetric detection of glucose with a low detection limit of 0.8 μM within 30 s. The artificial nanozymes with physiological functions provide the feasible strategies for mimicking the natural enzymes and realizing the biomedical diagnostics with a smart and miniature device.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Enzyme mimetic activities of spinel substituted nanoferrites (MFe2O4): A review of synthesis, mechanism and potential applications

Recently, the intrinsic enzyme-like activities of some nanoscale materials known as "nanozymes" have become a growing area of interest. Nanosized spinel substituted ferrites (SFs) with general formula of MFe₂O₄, where M represents a transition metal, are among a group of magnetic nanomaterials attracting researchers' enormous attention because of their excellent catalytic performance, biomedical applications and capability for environmental remediation. Due to their unique nanoscale physical-chemical properties, they have been used to mimic the catalytic activity of natural enzymes such as peroxidases, oxidases and catalases. In addition, various nanocomposite materials based on SFs have been introduced as novel artificial enzymes. This review mainly highlights the synthetic approaches for newly developed SF-nanozymes and also the structural/experimental factors that are effective on the kinetics and catalytic mechanisms of enzyme-like reactions. SF-nanozymes have been found potentially capable of being applied in various fields such as enzyme-free immunoassays and biosensors for colorimetric detection of biological molecules. Therefore, the application of SF nanoparticles, as efficient enzyme mimetics have been detailed discussed.

Peroxidase-like activity of magnetic poly(glycidyl methacrylate-co-ethylene dimethacrylate) particles

Poly(glycidyl methacrylate) (PGMA) is prone to modifications with different functional groups, magnetic fluids or direct coupling with biological molecules. The purpose of this research was to synthesize new magnetically responsive particles with peroxidase-like activity. Poly(glycidyl methacrylate-co-ethylene dimethacrylate) [P(GMA-EDMA)] particles containing carboxyl groups were obtained by emulsifier-free emulsion polymerization and hydrolysis and oxidation of PGMA with KMnO4, resulting in poly(carboxymethyl methacrylate-co-ethylene dimethacrylate) [P(CMMA-EDMA)] particles. Thionine (Th) was also attached to the particles [(P(CMMA-EDMA)-Th] via EDC/NHS chemistry to observe its effect on electron transfer during the oxidation reaction. Finally, the particles were coated with a nitric acid-stabilized ferrofluid in methanol. The resulting magnetic particles were characterized by several methods, including scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The effect of EDMA on the P(CMMA-EDMA) particle size and size distribution was investigated; the particle size changed from 300 to 340 nm, and the particles were monodispersed with a saturation magnetization of 11 Am2/kg. Finally, the effects of temperature and pH on the peroxidase-like activity of the magnetic P(CMMA-EDMA) and P(CMMA-EDMA)-Th particles were investigated. The particles, which exhibited a high activity at pH 4-6 and at ∼37 °C, represent a highly sensitive sensor component potentially useful in enzyme-based immunoassays.

Sensitive Molybdenum Disulfide Based Field Effect Transistor Sensor for Real-time Monitoring of Hydrogen Peroxide

A reliable and highly sensitive hydrogen peroxide (H₂O₂) field effect transistor (FET) sensor is reported, which was constructed by using molybdenum disulfide (MoS₂)/reduced graphene oxide (RGO). In this work, we prepared MoS₂ nanosheets by a simple liquid ultrasonication exfoliation method. After the RGO-based FET device was fabricated, MoS₂ was assembled onto the RGO surface for constructing MoS₂/RGO FET sensor. The as-prepared FET sensor showed an ultrahigh sensitivity and fast response toward H₂O₂ in a real-time monitoring manner with a limit of detection down to 1 pM. In addition, the constructed sensor also exhibited a high specificity toward H₂O₂ in complex biological matrix. More importantly, this novel biosensor was capable of monitoring of H₂O₂ released from HeLa cells in real-time. So far, this is the first report of MoS₂/RGO based FET sensor for electrical detection of signal molecules directly from cancer cells. Hence it is promising as a new platform for the clinical diagnosis of H₂O₂-related diseases.