In situ incorporation of magnetic nanoparticles within the carboxymethyl cellulose hydrogels enables dye removal

Magnetic recyclable carboxymethyl cellulose/gelatin/citrate@Fe3O4 photo-nanocomposite beads for ciprofloxacin removal via hybrid adsorption/photocatalysis process under solar light as a renewable energy source

Magnetically separable cross-linked carboxymethyl cellulose/gelatin/citrate-functionalized magnetite nanoparticles (Cit-Fe3O4) photo-nanocomposite beads (mCMC/Ge) were synthesized and applied in synergistic adsorption/photocatalytic degradation of ciprofloxacin (Cipro) pharmaceutical pollutant under sunlight irradiation. Various analytical techniques were employed to characterize their structural, textural, magnetic, thermal, and optical properties. The removal efficiency of mCMC/Ge beads was investigated considering different influencing parameters (pH, beads dosage, contact time, Cipro concentration, and temperature). Experimental data modeling indicated that the adsorption process followed pseudo-second-order kinetics and Langmuir isotherm models, with a maximum Langmuir adsorption capacity (qm) of 50 mg g-1 for mCMC/Ge, twice that of the matrix. Photocatalytic activity results showed prominent enhancement in Cipro removal using 1 g L-1 of mCMC/Ge at pH 7, as compared to Cit-Fe3O4, reaching 96 %, 85 %, and 63 % after 180 min of adsorption and 120 min of irradiation for initial pollutant concentrations of 10, 20, and 60 mg L-1, respectively. Furthermore, mCMC/Ge demonstrated efficient removal even in real water sample. The excellent removal performance of mCMC/Ge highlighted the synergy between polymeric matrix template and encapsulated Cit-Fe3O4 in improving Cipro adsorption and photodegradation. Furthermore, facile recyclability and sustained activity over five cycles identify mCMC/Ge photo-nanocomposite as a promising material for removing organic pollutants from contaminated waters.

Artificial neural network modelling and experimental investigations of malachite green adsorption on novel carboxymethyl cellulose/β-cyclodextrin/nickel cobaltite composite

This study presents a novel polymer nanocomposite based on carboxymethyl cellulose and β-cyclodextrin crosslinked with succinic acid (CMC-SA-β-CD) containing nickel cobaltite (NCO) nano-reinforcement. Various analytical techniques have been employed to investigate the structural, thermal, and morphological features of the resulting nanocomposite. The CMC-SA-β-CD/NCO nanocomposite has been utilized as an adsorbent for the removal of bisphenol-A (BPA, R% <40 %), malachite green (MG, R% > 75 %)), and Congo red (CR, no adsorption) from the synthetic wastewater. The study systematically explored the impact of various parameters on the adsorption process, and the interactions between MG and CMC-SA-β-CD/NCO were discussed. The adsorption data were fitted to different models to elucidate the kinetics and thermodynamics of the adsorption process. An artificial neural network (ANN) analysis was employed to train the experimental dataset for predicting adsorption outcomes. Despite a low BET surface area (0.798 m2 g-1), CMC-SA-β-CD/NCO was found to exhibit high MG adsorption capacity. CMC-SA-β-CD/NCO exhibited better MG adsorption performance at pH 5.5, 40 mg L-1 MG dye concentration, 170 min equilibrium time, 20 mg CMC-SA-β-CD/NCO dose with more than 90 % removal efficiency. Moreover, the thermodynamic studies suggest that the adsorption of MG was exothermic with ΔH° value -9.93 ± 0.76 kJ mol-1. The isotherm studies revealed that the Langmuir model was the best model to describe the adsorption of MG on CMC-SA-β-CD/NCO indicating monolayer surface coverage with Langmuir adsorption capacity of 182 ± 4 mg g-1. The energy of adsorption (11.4 ± 0.8 kJ mol-1) indicated chemisorption of MG on the composite surface. The kinetics studies revealed that the pseudo-first-order model best described the adsorption kinetics with q e  = 86.7 ± 2.9 mg g-1. A good removal efficiency (>70 %) was retained after five regeneration reuse cycles. The ANN-trained data showed good linearity between predicted and actual data for the adsorption capacity (R-value>0.99), indicating the reliability of the prediction model. The developed nanocomposite, composed predominantly of biodegradable material, is facile to synthesize and exhibited excellent monolayer adsorption of MG providing a new sustainable adsorbent for selective MG removal.

Preparation and Characterization of Fe3O4/Poly(HEMA-co-IA) Magnetic Hydrogels for Removal of Methylene Blue from Aqueous Solution

In the present study, Fe3O4/poly(2-hydroxyethyl methacrylate-co-itaconic acid) magnetic hydrogels (MHGs) were prepared by in situ synthesis of Fe3O4 magnetic particles in hydrogels (HGs). The resulting magnetic hydrogels were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), a vibrating sample magnetometer (VSM), scanning electron microscopy (SEM), and N2 adsorption-desorption. The effect of Fe3O4 on the swelling behavior and adsorption of methylene blue (MB) dye of the prepared hydrogel was studied. Parameters such as the dose, pH, contact time, and MB initial concentration were investigated. The results show that 75% (HG) and 91% (MHG) of MB (200 mg/L) were removed at doses of 2 mg/mL and 1 mg/mL, respectively, under a pH of 6.8 and a contact time of 10 min. The adsorption behavior followed the Langmuir isotherm model, indicating that the adsorption process takes place in monolayers and on homogeneous surfaces. The Langmuir capacities for MB adsorption using the HGs and MHGs were 78 and 174 mg/g, respectively. The adsorption kinetics followed a pseudo-second-order kinetic model. In addition, thermodynamic studies carried out show that the adsorption process is spontaneous and endothermic. Adsorption-desorption studies indicate that the magnetic hydrogel can remove MB for four cycles with removal efficiencies above 90%. Therefore, a MHG is suitable as an alternative material for MB adsorption.

Cellulose-Based Metallogels-Part 3: Multifunctional Materials

The incorporation of the metal phase into cellulose hydrogels, resulting in the formation of metallogels, greatly expands their application potential by introducing new functionalities and improving their performance in various fields. The unique antiviral, antibacterial, antifungal, and anticancer properties of metal and metal oxide nanoparticles (Ag, Au, Cu, CuxOy, ZnO, Al2O3, TiO2, etc.), coupled with the biocompatibility of cellulose, allow the development of composite hydrogels with multifunctional therapeutic potential. These materials can serve as efficient carriers for controlled drug delivery, targeting specific cells or pathogens, as well as for the design of artificial tissues or wound and burn dressings. Cellulose-based metallogels can be used in the food packaging industry to provide biodegradable and biocidal materials to extend the shelf life of the goods. Metal and bimetallic nanoparticles (Au, Cu, Ni, AuAg, and AuPt) can catalyze chemical reactions, enabling composite cellulose hydrogels to be used as efficient catalysts in organic synthesis. In addition, metal-loaded hydrogels (with ZnO, TiO2, Ag, and Fe3O4 nanoparticles) can exhibit enhanced adsorption capacities for pollutants, such as dyes, heavy metal ions, and pharmaceuticals, making them valuable materials for water purification and environmental remediation. Magnetic properties imparted to metallogels by iron oxides (Fe2O3 and Fe3O4) simplify the wastewater treatment process, making it more cost-effective and environmentally friendly. The conductivity of metallogels due to Ag, TiO2, ZnO, and Al2O3 is useful for the design of various sensors. The integration of metal nanoparticles also allows the development of responsive materials, where changes in metal properties can be exploited for stimuli-responsive applications, such as controlled release systems. Overall, the introduction of metal phases augments the functionality of cellulose hydrogels, expanding their versatility for diverse applications across a broad spectrum of industries not envisaged during the initial research stages.

Recent developments of polysaccharide based superabsorbent nanocomposite for organic dye contamination removal from wastewater - A review

One of the main problems with water pollution is dye contamination of rivers, industrial effluents, and water sources. It has endangered the world's sources of drinking water. Several remediation strategies have been carefully developed and tested to minimize this ominous picture. Due to their appealing practical and financial benefits, adsorption methods in particular are often listed as one of the most popular solutions to remediate dye-contaminated water. Biopolymer-based hydrogel nanocomposites are a cutting-edge class of materials with a wide range of applications that are effective in removing organic dyes from the environment. Since the incorporation of various materials into hydrogel matrices generated composite materials with distinct characteristics, these unique materials were often alluded to as ideal adsorbents. The fundamental emphasis of the conceptual and critical review of the literature in this research is the significant potential of hydrogel nanocomposites (HNCs) to remediate dye-contaminated water (especially for articles from the previous five years). The review also provides knowledge for the development of biopolymer-based HNCs, prospects, and opportunities for future research. It is also focused on optimum conditions for dye adsorption processes along with their adsorption kinetics and isotherm models. In summary, the information gained in this review research may contribute to a strengthened scientific rationale for the practical and efficient application of these novel adsorbent materials.

Citric, succinic, and vanillic acid-functionalized magnetic-cored dendrimer for methylene blue adsorption

A new functional composite was synthesized in this study comprising magnetic-cored dendrimer (MCD) modified with citric acid (CA), succinic acid (SA), and vanillic acid (VA) terminal groups. The CA-MCD, SA-MCD, and VA-MCD exhibited average particle size of 8-18 nm and superparamagnetic behavior. Adsorption potential of the composite was assessed by monitoring methylene blue (MB) removal from contaminated water. The CA-MCD attained adsorption equilibrium in 30 min while SA-MCD and VA-MCD achieved equilibrium in 60 min. The Langmuir model better fitted the adsorption results than the Freundlich model, indicating a monolayer mode of MB adsorption on the composite. Maximum adsorption capacity of CA-MCD, SA-MCD, and VA-MCD was 216.30 mg/g, 184.29 mg/g, and 196.58 mg/g, respectively. The CA-MCD exhibited best adsorption performance by removing 99% MB at pH = 11. In reusability experiments, the CA-MCD, SA-MCD, and VA-MCD maintained over 90% MB adsorption for both 15 mg/L and 50 mg/L solutions in the third cycle. Overall, the organic acid-functionalized MCDs with high adsorption capacity and reusability potential showed utility for practical application for wastewater decontamination.