Evaluation of mesoporous TCPSi, MCM-41, SBA-15, and TUD-1 materials as API carriers for oral drug delivery

Liquisolid Technique: A Novel Technique with Remarkable Applications in Pharmaceutics

Recently, it has been observed that newly developed drugs are lipophilic and have low aqueous solubility issues, which results in a lower dissolution rate and bioavailability of the drugs. To overcome these issues, the liquisolid technique, an innovative and advanced approach, comes into play. This technique involves the conversion of the drug into liquid form by dissolving it in non-volatile solvent and then converting the liquid medication into dry, free-flowing, and compressible form by the addition of carrier and coating material. It offers advantages like low cost of production, easy method of preparation, and compactable with thermo labile and hygroscopic drugs. It has been widely applied for BCS II drugs to enhance dissolution profile. Improving bioavailability, providing sustained release, minimizing pH influence on drug dissolution, and improving drug photostability are some of the other promising applications of this technology. This review article presents an overview of the liquisolid technique and its applications in formulation development.

Effect of process parameters in high shear granulation on characteristics of a novel co-processed mesoporous silica material

In this study, insights into the development and optimization of a co-processed excipient based on mesoporous silica are presented. The main advantage of such a material is that it is appropriate for direct tablet compression and has a sufficiently large specific surface area to be suitable for potential subsequent drug loading and formulation of (amorphous) solid dispersions. Our aim was to use a Design of Experiments approach to investigate which process parameters in high shear granulation affect the characteristics of such a co-processed material. The parameters included were the amount of binder (isomalt), the amount of water (granulation liquid), the water addition rate and the speed of the impeller. The responses evaluated and modelled were particle size and its distribution, specific surface area, bulk density, flowability, compressibility and compactibility. The models obtained showed good quality in terms of goodness of fit and predictive power. Active effects were identified for all responses, giving a thorough insight into factors affecting the material characteristics. Optimization experiments resulted in products with the desired characteristics (high specific surface area, large particle size, good flow and compression properties) and confirmed the validity of the generated models.

Long-Term and Stable Dental Therapies via an In Situ Spontaneous Medicine Delivery System

Chronic oral diseases are boring, long-term, and discomfort intense diseases, which endanger the physical and mental health of patients constantly. Traditional therapeutic methods based on medicines (including swallowing drugs, applying ointment, or injection in situ) bring much inconvenience and discomfort. A new method possessing accurate, long-term, stable, convenient, and comfortable features is in great need. In this study, we demonstrated a development of one spontaneous administration for the prevention and therapy on a series of oral diseases. By uniting dental resin and medicine-loaded mesoporous molecular sieve, nanoporous medical composite resin (NMCR) was synthesized by a simple physical mixing and light curing method. Physicochemical investigations of XRD, SEM, TEM, UV-vis, N₂ adsorption, and biochemical experiments of antibacterial and pharmacodynamic evaluation on periodontitis treatment of SD rats were carried on to characterize an NMCR spontaneous medicine delivery system. Compared to existing pharmacotherapy and in situ treatments, NMCR can keep a quite long time of stable in situ medicine release during the whole therapeutic period. Taking the periodontitis treatment as an instance, the probing pocket depth value in a half-treatment time of 0.69 from NMCR@MINO was much lower than that of 1.34 from the present commercial Periocline ointment, showing an over two times effect.

Role of Fine Silica as Amorphous Solid Dispersion Carriers for Enhancing Drug Load and Preventing Recrystallization- A Comprehensive Review

Amorphous solid dispersion (ASD) is a popular concept for improving the dissolution and oral bioavailability of poorly water-soluble drugs. ASD faces two primary challenges of low drug loading and recrystallization upon storage. Several polymeric carriers are used to fabricate a stable ASD formulation with a high drug load. The role of silica in this context has been proven significant. Different types of silica, porous and nonporous, have been used to develop ASD. Amorphous drugs get entrapped into silica pores or adsorbed on their surface. Due to high porosity and wide surface area, silica provides better drug dissolution and high drug loading. Recrystallization of amorphous drugs is inhibited by limited molecular ability inside the delicate pores due to hydrogen bonding with the surface silanol groups. A handful of researches have been published on silica-based ASD, where versatile types of silica have been used. However, the effect of different kinds of silica on product stability and drug loading has been rarely addressed. The present study analyzes multiple porous and nonporous silica types and their distinct role in developing a stable ASD. Emphasis has been given to various types of silica which are commonly used in the pharmaceutical industry.

Absolute Quantification of Residual Solvent in Mesoporous Silica Drug Formulations Using Magic-Angle Spinning NMR Spectroscopy

Porous silica is used as a drug delivery agent to improve the bioavailability of sparsely soluble compounds. In this approach, the active pharmaceutical ingredient (API) is commonly loaded into the porous silica by incipient wetness impregnation using organic solvents. Subsequent solvent elimination is critical as the residual solvent concentration cannot exceed threshold values set by health and safety regulations (e.g., EMA/CHMP/ICH/82260/2006). For dichloromethane and methanol, for example, residual concentrations must be below 600 and 3000 ppm, respectively. Today, EU and USA Pharmacopoeias recommend tedious procedures for residual solvent quantification, requiring extraction of the solvent and subsequent quantification using capillary gas chromatography with static headspace sampling (sHS-GC). This work presents a new method based on the combination of standard addition and absolute quantification using magic-angle spinning nuclear magnetic resonance spectroscopy (MAS qNMR). The methodology was originally developed for absolute quantification of water in zeolites and has now been validated for quantification of residual solvent in drug formations using mesoporous silica loaded with ibuprofen dissolved in DCM and MeOH as test samples. Interestingly, formulations prepared using as-received or predried mesoporous silica contained 5465 versus 484.9 ppm DCM, respectively. This implies that the initial water content of the silica carrier can impact the residual solvent concentration in drug-loaded materials. This observation could provide new options to minimize the occurrence of these undesired solvents in the final formulation.

Tuning Mesoporous Silica Nanoparticles in Novel Avenues of Cancer Therapy

The global menace of cancer has led to an increased death toll in recent years. The constant evolution of cancer therapeutics with novel delivery systems has paved the way for translation of innovative therapeutics from bench to bedside. This review explains the significance of mesoporous silica nanoparticles (MSNs) as delivery vehicles with particular emphasis on cancer therapy, including novel opportunities for biomimetic therapeutics and vaccine delivery. Parameters governing MSN synthesis, therapeutic agent loading characteristics, along with tuning of MSN toward cancer cell specificity have been explained. The advent of MSN in nanotheranostics and its potential in forming nanocomposites for imaging purposes have been illustrated. Additionally, various hurdles encountered during the bench to bedside translation have been explained along with potential avenues to circumvent them. This also opens up new horizons in drug delivery, which could be useful to researchers in the years to come.

A Comparative Loading and Release Study of Vancomycin from a Green Mesoporous Silica

Since its first use as a drug delivery system, mesoporous silica has proven to be a surprisingly efficient vehicle due to its porous structure. Unfortunately, most synthesis methods are based on using large amounts of surfactants, which are then removed by solvent extraction or heat treatment, leading to an undesired environmental impact because of the generated by-products. Hence, in the present study, we followed the synthesis of a silica material with a wormhole-like pore arrangement, using two FDA-approved substances as templates, namely Tween-20 and starch. As far as we know, it is the first study using the Tween-20/starch combo as a template for mesoporous silica synthesis. Furthermore, we investigated whether the obtained material using this novel synthesis had any potential in using it as a DDS. The material was further analyzed by XRD, TEM, FT-IR, N2 adsorption/desorption, and DLS to investigate its physicochemical features. Vancomycin was selected as the active molecule based on the extensive research engaged towards improving its bioavailability for oral delivery. The drug was loaded onto the material by using three different approaches, assuming its full retention in the final system. Thermal analysis confirmed the successful loading of vancomycin by all means, and pore volume significantly decreased upon loading, especially in the case of the vacuum-assisted method. All methods showed a slower release rate compared to the same amount of the pure drug. Loadings by physical mixing and solvent evaporation released the whole amount of the drug in 140 min, and the material loaded by the vacuum-assisted method released only 68.2% over the same period of time, leading us to conclude that vancomycin was adsorbed deeper inside the pores. The kinetic release of the three systems followed the Higuchi model for the samples loaded by physical mixing and vacuum-assisted procedures, while the solvent evaporation loading method was in compliance with the first-order model.

Mesoporous Materials as Elements of Modern Drug Delivery Systems for Anti-Inflammatory Agents: A Review of Recent Achievements

Interest in the use of mesoporous materials as carriers of medicinal substances has been steadily increasing in the last two decades. Mesoporous carriers have application in the preparation of delivery systems for drugs from various therapeutic groups; however, their use as the carriers of anti-inflammatory agents is particularly marked. This review article, with about 170 references, summarizes the achievements in the application of mesoporous materials as the carriers of anti-inflammatory agents in recent years. This article will discuss a variety of mesoporous carriers as well as the characteristics of their porous structure that determine further use of these materials in the field of medical applications. Special attention will be paid to the progress observed in the construction of stimuli-responsive drug carriers and systems providing site-specific drug delivery. Subsequently, a review of the literature devoted to the use of mesoporous matrices as the carriers of anti-inflammatory drugs was carried out.

SBA-15 Mesoporous Silica as Delivery Vehicle for rhBMP-2 Bone Morphogenic Protein for Dental Applications

(1) Background: A proposed approach to promote periodontal tissue regeneration in cases of peri-implantitis is the local administration of growth factors at the implant site. Recombinant human bone morphogenetic protein-2 (rh-BMP-2) can effectively promote bone regeneration and osseointegration and the development of appropriate carriers for its delivery is of paramount importance. The aim of the present study was to develop SBA-15 mesoporous nanoparticles (MSNs) with varying porosity, evaluate their biocompatibility with human Periodontal Ligament Cells (hPDLCs) and to investigate their effectiveness as carriers of rh-BMP-2. (2) Methods: SBA-15 type mesoporous silicas were synthesized via sol-gel reaction. The calcined SBA-15 samples were characterized by N2 porosimetry, Fourier transform-infrared spectrometry (FTIR), Scanning (SEM) and Transmission Electron Microscopy (TEM). Rh-BMP-2 loading and release kinetics were evaluated by UV spectroscopy. (3) Results: MSNs presented hexagonally arranged, tubular pores of varying length and diameter. Slightly higher loading capacity was achieved for SBA-15 with large pores that presented good hemocompatibility. MTT assay revealed no cytotoxic effects for all the tested materials, while SBA-15 with large pores induced a significant upregulation of cell viability at day 5. (4) Conclusions: SBA-15 MSNs may prove a valuable delivery platform towards the effective release of bone-inducing proteins.

Organic dyes supported on silicon-based materials: synthesis and applications as photocatalysts

The most important advance in photocatalysis in the last decade has been the synthesis and application of organic compounds to promote this process.

Application of commercially available mesoporous silica for drug dissolution enhancement in oral drug delivery

Due to the high number of poorly water-soluble active pharmaceutical ingredients, oral drug delivery development has become challenging. One of the strategies to enhance drug solubility and to achieve high oral bioavailability is to formulate such compounds into amorphous solid dispersions. In recent years, porous materials have been investigated as possible carriers into which a drug can be adsorbed, such as mesoporous silica, in particular. Unlike the ordered mesoporous network of silica, non-ordered silica already has a "generally regarded as safe" status, and is already used as an excipient in pharmaceutical and cosmetic products. Thus, it is reasonable to expect that products that contain solid dispersions with non-ordered carriers will reach the market sooner and more easily than those with ordered mesoporous carriers. The emphasis of this review is therefore on non-ordered commercially available mesoporous silica and the progress that has been made in development of the use of these materials for improved dissolution rates in oral drug delivery. First, a thorough categorisation of the drug loading methods is presented, followed by discussion on the most important characteristics of solid dispersions (i.e., physical state, stability, drug release). Finally, manufacturability and production of a final solid dosage form are considered.

Anisotropic and Amphiphilic Mesoporous Core-Shell Silica Microparticles Provide Chemically Selective Environments for Simultaneous Delivery of Curcumin and Quercetin

Porous silica materials are often used for drug delivery. However, systems for simultaneous delivery of multiple drugs are scarce. Here we show that anisotropic and amphiphilic dumbbell core-shell silica microparticles with chemically selective environments can entrap and release two drugs simultaneously. The dumbbells consist of a large dense lobe and a smaller hollow hemisphere. Electron microscopy images show that the shells of both parts have mesoporous channels. In a simple etching process, the properly adjusted stirring speed and the application of ammonium fluoride as etching agent determine the shape and the surface anisotropy of the particles. The surface of the dense lobe and the small hemisphere differ in their zeta potentials consistent with differences in dye and drug entrapment. Confocal Raman microscopy and spectroscopy show that the two polyphenols curcumin (Cur) and quercetin (QT) accumulate in different compartments of the particles. The overall drug entrapment efficiency of Cur plus QT is high for the amphiphilic particles but differs widely between Cur and QT compared to controls of core-shell silica microspheres and uniformly charged dumbbell microparticles. Furthermore, Cur and QT loaded microparticles show different cancer cell inhibitory activities. The highest activity is detected for the dual drug loaded amphiphilic microparticles in comparison to the controls. In the long term, amphiphilic particles may open up new strategies for drug delivery.

Improved transdermal permeability of tanshinone IIA from cataplasms by loading onto nanocrystals and porous silica

Novel transdermal cataplasms have been designed to improve permeability of poorly soluble drugs by different pretreatments. Nanocrystal and porous silica solid dispersions were loaded with Tanshinone IIA and incorporated into a cross-linked hydrogel matrix of cataplasm. It was shown that the small particle size and improved dissolution would increase dermal bioavailability. The adhesion, rheological properties, drug release, skin permeation, skin deposition and in vivo skin absorption of the different formulations were investigated. In an in vitro experiment using mouse skin, cumulative amount of drug permeated within 24 h was 7.32 ± 0.98 μg/cm² from conventional cataplasm, 13.14 ± 0.70 μg/cm² from nanocrystal-loaded cataplasm and 11.40 ± 0.13 μg/cm² from porous silica solid dispersion-loaded cataplasm. In vitro dissolution profiles showed that drug release was 76.5% and 74.9% from two optimized cataplasms within 24 h, while conventional cataplasm was 55.0%. The cross-linking characteristics of the cataplasms were preserved after incorporation of different drug forms, while the elastic and viscous behaviors of the hydrogel layers increased. In vivo evaluation by CLSM showed the more favorable skin permeation for two optimized cataplasms. These findings suggest that applications of nanocrystal and porous silica systems on cataplasms enable effective transdermal delivery of poorly soluble drugs. The resulting drug delivery and rheological properties are desirable for transdermal application.AbbreviationAll the abbreviations that appear in this article are shown in Table 1.

Antibacterial and osteogenic activities of clindamycin-releasing mesoporous silica/carboxymethyl chitosan composite hydrogels

Conventional treatment of jaw bone infection is often ineffective at controlling bacterial infection and enhancing bone regeneration. Biodegradable composite hydrogels comprised of carboxymethyl chitosan (CMCS) and clindamycin (CDM)-loaded mesoporous silica nanoparticles (MCM-41), possessing dual antibacterial activity and osteogenic potency, were developed in the present study. CDM was successfully loaded into both untreated and plasma-treated MCM-41 nanoparticles, denoted as (p)-MCM-41, followed by the incorporation of each of CDM-loaded (p)-MCM-41 into CMCS. The resulting CDM-loaded composite hydrogels, (p)-MCM-41-CDM-CMCS, demonstrated slow degradation rates (about 70% remaining weight after 14-day immersion), while the CDM-free composite hydrogel entirely disintegrated after 4-day immersion. The plasma treatment was found to improve drug loading capacity and slow down initial drug burst effect. The prolonged releases of CDM from both (p)-MCM-41-CDM-CMCS retained their antibacterial effect against Streptococcus sanguinis for at least 14 days in vitro. In vitro assessment of osteogenic activity showed that the CDM-incorporated composite hydrogel was cytocompatible to human mesenchymal stem cells (hMSCs) and induced hMSC mineralization via p38-dependent upregulated alkaline phosphatase activity. In conclusion, novel (p)-MCM-41-CDM-CMCS hydrogels with combined controlled release of CDM and osteogenic potency were successfully developed for the first time, suggesting their potential clinical benefit for treatment of intraoral bone infection.

Physicochemical Characterization and Drug Release Properties of Methyl-Substituted Silica Xerogels Made Using Sol-Gel Process

In this work, a multi-analytical approach involving nitrogen porosimetry, small angle neutron and X-ray scattering, Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopies, X-ray diffraction, thermal analysis and electron microscopy was applied to organically modified silica-based xerogels obtained through the sol-gel process. Starting from a tetraethoxysilane (TEOS) precursor, methyltriethoxysilane (MTES) was added to the reaction mixture at two different pH values (2.0 and 4.5) producing hybrid xerogels with different TEOS/MTES molar ratios. Significant differences in the structure were revealed in terms of the chemical composition of the silica network, hydrophilic/hydrophobic profile, particle dimension, pore shape/size and surface characteristics. The combined use of structural characterization methods allowed us to reveal a relation between the cavity dimensions, the synthesis pH value and the grade of methyl substitution. The effect of the structural properties on the controlled Captopril release efficiency has also been tested. This knowledge facilitates tailoring the pore network for specific usage in biological/medical applications. Knowledge on structural aspects, as reported in this work, represents a key starting point for the production of high-performance silica-based hybrid materials showing enhanced efficacy compared to bare silica prepared using only TEOS.

Drug loading to mesoporous silica carriers by solvent evaporation: A comparative study of amorphization capacity and release kinetics

The sorption of poorly aqueous soluble active pharmaceutical ingredients (API) to mesoporous silica carriers is an increasingly common formulation strategy for dissolution rate enhancement for this challenging group of substances. However, the success of this approach for a particular API depends on an array of factors including the properties of the porous carrier, the loading method, or the attempted mass fraction of the API. At present, there is no established methodology for the rational selection of these parameters. In the present work, we report a systematic comparison of four well-characterised silica carriers and seven APIs loaded by the same solvent evaporation method. In each case, we find the maximum amorphization capacity by x-ray powder diffraction analysis and measure the in vitro drug release kinetics. For a selected case, we also demonstrate the potential for bioavailability enhancement by a permeation essay.

Development of a Hydrophobicity-Controlled Delivery System Containing Levodopa Methyl Ester Hydrochloride Loaded into a Mesoporous Silica

Background: The drug release of antiparkinsonian drugs is an important issue during the formulation process because proper release kinetics can help to reduce the off periods of Parkinson’s disease. A 2-factor, 3-level (3²) full-factorial design was conducted to evaluate statistically the influence of the hydrophobicity of mesoporous silica on drug release. Methods: Hydrophobization was evaluated by different methods, such as contact angle measurement, infrared spectroscopy and charge titration. After loading the drug (levodopa methyl ester hydrochloride, melevodopa hydrochloride, LDME) into the mesopores, drug content, particle size, specific surface area and homogeneity of the products were also analyzed. The amorphous state of LDME was verified by X-ray diffractometry and differential scanning calorimetry. Results: Drug release was characterized by a model-independent method using the so-called initial release rate parameter, as detailed in the article. The adaptability of this method was verified; the model fitted closely to the actual release results according to the similarity factor, independently of the release kinetics. Conclusions: The API was successfully loaded into the silica, resulting in a reduced surface area. The release studies indicated that the release rate significantly decreased (p < 0.05) with increasing hydrophobicity. The products with controlled release can reduce the off period frequency.

Mesoporous Silica Particles as Drug Delivery Systems-The State of the Art in Loading Methods and the Recent Progress in Analytical Techniques for Monitoring These Processes

Conventional administration of drugs is limited by poor water solubility, low permeability, and mediocre targeting. Safe and effective delivery of drugs and therapeutic agents remains a challenge, especially for complex therapies, such as cancer treatment, pain management, heart failure medication, among several others. Thus, delivery systems designed to improve the pharmacokinetics of loaded molecules, and allowing controlled release and target specific delivery, have received considerable attention in recent years. The last two decades have seen a growing interest among scientists and the pharmaceutical industry in mesoporous silica nanoparticles (MSNs) as drug delivery systems (DDS). This interest is due to the unique physicochemical properties, including high loading capacity, excellent biocompatibility, and easy functionalization. In this review, we discuss the current state of the art related to the preparation of drug-loaded MSNs and their analysis, focusing on the newest advancements, and highlighting the advantages and disadvantages of different methods. Finally, we provide a concise outlook for the remaining challenges in the field.

Mesoporous silica nanoparticles: facile surface functionalization and versatile biomedical applications in oncology

Mesoporous silica nanoparticles (MSNs) have received increasing interest due to their tunable particle size, large surface area, stable framework, and easy surface modification. They are increasingly being used in varying applications as delivery vehicles including bio-imaging, drug delivery, biosensors and tissue engineering etc. Precise structure control and the ability to modify surface properties of MSNs are important for their applications. This review summarises the different synthetic methods for the preparation of well-ordered MSNs with tunable pore volume as well as the approaches of drugs loading, especially highlighting the facile surface functionalization for various purposes and versatile biomedical applications in oncology. Finally, the challenges of clinical transformation of MSNs-based nanomedicines are further discussed.

Highlights in Mesoporous Silica Nanoparticles as a Multifunctional Controlled Drug Delivery Nanoplatform for Infectious Diseases Treatment

Infectious diseases are a major global concern being responsible for high morbidity and mortality mainly due to the development and enhancement of multidrug-resistant microorganisms exposing the fragility of medicines and vaccines commonly used to these treatments. Taking into account the scarcity of effective formulation to treat infectious diseases, nanotechnology offers a vast possibility of ground-breaking platforms to design new treatment through smart nanostructures for drug delivery purposes. Among the available nanosystems, mesoporous silica nanoparticles (MSNs) stand out due their multifunctionality, biocompatibility and tunable properties make them emerging and actual nanocarriers for specific and controlled drug release. Considering the high demand for diseases prevention and treatment, this review exploits the MSNs fabrication and their behavior in biological media besides highlighting the most of strategies to explore the wide MSNs functionality as engineered, smart and effective controlled drug release nanovehicles for infectious diseases treatment. Graphical Abstract Schematic representation of multifunctional MSNs-based nanoplatforms for infectious diseases treatment.

Fabrication, characterization and biological evaluation of silymarin nanoparticles against carbon tetrachloride-induced oxidative stress and genotoxicity in rats

This study aimed to synthesize silymarin nanoparticles (SILNPs) using chitosan nanoparticles as a delivery system and to evaluate their protective effects against CCl₄ in rats. Eight groups of male Sprague-Dawley rats were treated for three weeks included the control group, CCl₄-treated group (100 mg/kg b.w twice a week); SIL-treated group (50 mg/lg b.w); the groups treated daily with low dose (LD) or high dose (HD) of SILNPs (25, 50 mg/kg b.w) and the groups treated with CCl₄ plus SIL, SILNPs (LD) or SILNPs (HD). Blood and tissue samples were collected for different assays. The synthesized SILNPs showed a smooth rounded shape with average particle size of 100 ± 2.8 nm. SILNPs contain the same compounds found in raw SIL and the in vitro release of SILNPs continues till 24 h. The in vivo study revealed that SIL and SILNPs at the low or high dose induced a significant improvement in the hematological parameters, liver and kidney function, lipid profile, serum cytokines, gene expression DNA fragmentation and histology of liver and kidney tissue resulted from CCl₄. It could be concluded that SILNPs can be applied in oral delivery formulations with a potential application value for liver disease therapy.

Antibacterial Effect of Thymol Loaded SBA-15 Nanorods Incorporated in PCL Electrospun Fibers

For the effective management of infected chronic wounds, the incorporation of antimicrobial drugs into wound dressings can increase their local availability at the infection site. Mesoporous silicon dioxide SBA-15 is an excellent drug carrier with tunable drug release kinetics. In this work, synthesized SBA-15 loaded with the natural antimicrobial compound thymol (THY) was incorporated into polycaprolactone (PCL) electrospun nanofibers to obtain an advanced wound dressing. Rod-shaped particles with internal parallel channels oriented along the longitudinal axis (diameter: 138 ± 30 nm, length: 563 ± 100 nm) were loaded with 70.8 wt.% of THY. Fiber mats were prepared using these particles as nanofillers within polycaprolactone (PCL) electrospun fibers. The resulting mats contained 5.6 wt.% of THY and more than half of this loading was released in the first 7 h. This release would prevent an initial bacterial colonization and also inhibit or eliminate bacterial growth as in vitro shown against Staphylococcus aureus ATCC 25923. Minimal inhibitory concentration (MIC: 0.07 mg/mL) and minimal bactericidal concentration (MBC: 0.11 mg/mL) of released THY were lower than the amount of free THY required, demonstrating the benefit of drug encapsulation for a more efficient bactericidal capacity due to the direct contact between mats and bacteria.

Nanoscale delivery systems for microRNAs in cancer therapy

Concomitant with advances in research regarding the role of miRNAs in sustaining carcinogenesis, major concerns about their delivery options for anticancer therapies have been raised. The answer to this problem may come from the world of nanoparticles such as liposomes, exosomes, polymers, dendrimers, mesoporous silica nanoparticles, quantum dots and metal-based nanoparticles which have been proved as versatile and valuable vehicles for many biomolecules including miRNAs. In another train of thoughts, the general scheme of miRNA modulation consists in inhibition of oncomiRNA expression and restoration of tumor suppressor ones. The codelivery of two miRNAs or miRNAs in combination with chemotherapeutics or small molecules was also proposed. The present review presents the latest advancements in miRNA delivery based on nanoparticle-related strategies.

Fundamental evaluation and optimization of porous spherical silica for developing functional fine particles via fluidized bed coating

Particle coating, a taste-masking technique for drugs, is limited by its long manufacturing time, which is caused by the decrease in the spray rate required to prevent particle agglomeration. Mesoporous silica particles, which have a high surface area and pore sizes in the range of 2-50 nm, possess high surface free energy; they have attracted significant interest for numerous applications in adsorption, separation, and catalysis and drug delivery. A form of mesoporous silica, microbead silicate, can prevent particle aggregation because of its good water absorbency and drying properties. Hence, it has been suggested to be applicable for particle coating. This study evaluated the physical properties and drug release capability of microbead silicate with different pore sizes. Although microbead silicate with small pores displayed a rapid drug release profile, drug release was incomplete. Contrastingly, microbead silicate with large pores achieved complete drug release even with high drug loading. Furthermore, in the case of 100% layering, the porosity of microbead silicate was maintained, thus sufficiently preventing aggregation due to the prevention of formation of liquid bridging of the coating solution. These results suggest that using microbead silicate with large pores for particle coating enables complete drug release while improving manufacturability.

Release Kinetics of Nicotine Loaded onto Mesoporous Silicate Materials for Use in Nicotine Replacement Therapy

OBJECTIVE

In this work, the loading of nicotine onto mesoporous silicate materials and its release into a phosphate buffer solution at 37°C were investigated.

METHODS

The mesoporous silicate materials designated as MCM-41 were prepared with different pore sizes via using alkyltrimethylammonium bromide surfactants with different alkyl chain lengths of carbon atoms 12, 14, and 16. The mesoporous silicate systems were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), N2-adsorption-desorption isotherms, and FT-IR spectroscopy.

RESULTS

Loading of nicotine was confirmed by FTIR and thermal gravimetric analysis and was determined by High-Performance Liquid Chromatography (HPLC).

CONCLUSION

A slight increase in loading capacity with increasing pore size was observed, with a loading capacity of about 17% for MCM-41(16). The release of nicotine was monitored by HPLC and was almost complete for MCM-41(14) and MCM-41(16) in 8 h.

Synthesis of Hollow Silica Nanoparticle Aggregates from Asymmetric Methyltrimethoxysilane Using a Modified SBA-15 Method

This work presents the synthesis and characterization of hollow silica particles that were fabricated with the asymmetric methyltrimethoxysilane (MTMS) as the only silica precursor, by using a modified SBA-15 synthesis method, for the first time. The MTMS concentration was varied in the range from 0.300 to 0.900 M. The hollow silica nanoparticulate material characteristics were compared to those of SBA-15 silica made by using tetraethyl orthosilicate. The hollow silica nanoparticle aggregates (named as MS-Asym) showed varied nanoparticle shapes from irregular to close to spherical, with multiple hollow pores as characterized by SEM and TEM. This result is very different from SBA-15, which has a ropelike shape. X-ray diffraction data showed that the MS-Asym silica samples were disordered compared to the ordered SBA-15. Nitrogen sorption measurements suggested that the SBA-15 is mainly mesoporous, whereas MS-Asym has a combined microporous and mesoporous structure. Furthermore, attenuated total reflectance-Fourier transform infrared spectroscopy spectra infer a different polymerization mechanism occurs for MS-Asym compared to that of SBA-15 silica.

New insights towards mesoporous silica nanoparticles as a technological platform for chemotherapeutic drugs delivery

Mesoporous silica nanoparticles (MSNs) displays interesting properties for biomedical applications such as high chemical stability, large surface area and tunable pores diameters and volumes, allowing the incorporation of large amounts of drugs, protecting them from deactivation and degradation processes acting as an excellent nanoplatform for drug delivery. However, the functional MSNs do not present the ability to transport the therapeutics without any leakage until reach the targeted cells causing side effects. On the other hand, the hydroxyls groups available on MSNs surface allows the conjugation of specific molecules which can binds to the overexpressed Enhanced Growth Factor Receptor (EGFR) in many tumors, representing a potential strategy for the cancer treatment. Beyond that, the targeting molecules conjugate onto mesoporous surface increase its cell internalization and act as gatekeepers blocking the mesopores controlling the drug release. In this context, multifunctional MSNs emerge as stimuli-responsive controlled drug delivery systems (CDDS) to overcome drawbacks as low internalization, premature release before to reach the region of interest, several side effects and low effectiveness of the current treatments. This review presents an overview of MSNs fabrication methods and its properties that affects drug delivery as well as stimuli-responsive CDDS for cancer treatment.

Modifying release of poorly soluble active pharmaceutical ingredients with the amine functionalized SBA-16 type mesoporous materials

SBA-16 and two modified SBA-16 type ordered mesoporous silica were used as the carriers for ibuprofen (anti-inflammatory drug) and furosemide (loop diuretic drug). Modification of the solid carrier was prepared with chitosan or N-3[(amino(poly-propylenoxy)]aminopropyltrimethoxysilane. The samples of carriers and carrier-drug loaded materials were characterized by X-ray diffraction, N₂ adsorption, Fourier-transform infrared spectroscopy, thermogravimetry, and differential scanning calorimetry. The release profiles of active pharmaceutical ingredients were performed in media with different pH in the USP 2 apparatus as well as in two biorelevant media (fasted state simulated gastric fluid and fasted state small intestinal fluid) in USP 4 apparatus. The loading of active substances into mesoporous materials was performed with modified immersion method. The maximum content of deposited drug in mesoporous material was close to 12.0 and 2.2 wt.% for ibuprofen and furosemide, respectively. After drug adsorption, the reduction of BET surface area, pore volume and pore diameter of non-modified and modified SBA-16 was observed, while the cubic arrays of siliceous matrix were well preserved. The release profiles of ibuprofen and furosemide loaded in mesoporous materials in media with different pH and biorelevant fasted state simulated gastric fluid and fasted state small intestinal fluid showed that the new SBA-16 type materials modify the release profiles of furosemide, increasing the dissolution rate of these substances in the medium at pH 1.2. The cytotoxicity of the materials and permeability of drugs after their loading on SBA-16 materials were evaluated on Caco-2 model. The results of our study showed that mesoporous materials did not exert cytotoxic effects and did not influence on the permeability of both active pharmaceutical ingredients in relation to pure substances.

Synthesis and modification of crystalline SBA-15 nanowhiskers as a pH-sensitive metronidazole nanocarrier system

Clinical resistance to drugs and diminution in their side effects have become great issues for pharmacologists. In veterinary medicine, parasites like Trichomonas gallinae are of veterinary, hygienic and economic importance and can be treated by metronidazole. Unfortunately, scientific evidence has been reported about its resistance and serious side effects in trichomoniasis. In this research, it was attempted to introduce a new procedure to lower side effects of the drug molecules and also, enhance the treatment of disease. Whisker-formed SBA-15 nanoparticles were utilized for the first time in this issue. They had mesoporous structures which metronidazole molecules could be trapped in them. Additionally, these crystalline nanowhiskers were modified with tannic acid to make the release process better. The branches of tannic acid covered the opening of pores in crystalline SBA-15 nanowhiskers and restricted the drug from fast release. It caused a controlled metronidazole release in the smart drug delivery. These nanocarriers were completely tested by several experiments. Whisker-like SBA-15 nanocrystals had a mesopore volume of 0.5931 cm³/g, pore diameter of 6.06 nm and surface area of 491.38 m²/g. Based on TGA analysis, 10% of tannic acid was coated on the crystalline nanowhiskers during the modification. The metronidazole content and entrapment efficiency of final nanocarriers was 28.56% and 71.40%, respectively. The decomposition of tannic acid in lower pHs made whisker-like SBA-15@tannic acid nanocrystals be pH-responsive which can be used for other applications in the pharmacology. In-vitro study revealed that the minimal lethal concentration of nanocarriers was 0.5 mg/mL for 180 min.

Effect of solvent selection on drug loading and amorphisation in mesoporous silica particles

Increasing the dissolution rate of poorly water-soluble active pharmaceutical ingredients (APIs) is a key strategy used for improving their oral bioavailability. One of the formulation approaches is API loading to mesoporous carrier particles, which can increase the dissolution rate through the combination of improved powder wettability and dispersion, higher surface area, and API conversion from crystalline to the amorphous state. From the formulation process point of view, the maximum achievable drug loading is a crucial parameter, which depends on the loading method. Drug loading by sorption from a solution is a technologically attractive approach, since it involves familiar unit operations (mixing, filtration, drying). However, the success of the equilibrium sorption approach depends on the choice of the solvent. In this work we present an experimental study of loading efficiency to mesoporous silica particles, based on a set of 10 APIs combined with 6 different solvents at a range of concentrations. We show that due to the competitive nature of the adsorption process, the solvent with the highest API solubility is not necessarily the best candidate for maximising the API loading. Based on the investigated drug-solvent combinations, we show that the dielectric constant of the solvent is a good predictor of loading efficiency and can be used as a general guideline for solvent selection. On the other hand, we did not find any systematic correlation between commonly measured API properties such as logP and their loading efficiency.

Application of liquisolid technology for promoting the renoprotective efficacy of walnut extracts in chronic renal failure rat model

Chronic renal failure (CRF) is among the major health problems that could lead to increased morbidity and mortality among population. 'Nutraceuticals' is an emerging field for natural agents from plant foods that could reduce the progression of such disease. Many newly developed drugs are having bioavailability problems owing to their water insolubility. Liquisolid technique is one of the promising technological approaches to increase solubility and hence, drug absorption. The aim of the present research is to prepare and evaluate the renoprotective effect of the walnut extracts liquisolid formulations in CRF rat model. Saturation solubility study claimed PEG 400 and Tween 20 as good solubilizers for walnut extracts, thus chosen for preparation. The angle of slide was determined for the carrier; microcrystalline cellulose and coating material; silicon dioxide and liquid load factor was evaluated. Eight liquisolid systems were prepared employing 25% and 50% of liquid medication. Their flow and compressibility parameters showed good properties. Dissolution study was more in favor of formulations prepared using PEG 400. Of these, formulation F8 comprising carrier/coat ratio (10:1) and 50% liquid medication, showing superior dissolution properties was selected to perform stability and in-vivo evaluations. Two CRF induced rat groups received F8 at two oral doses (50 and 100 mg/kg). Biochemical and nutritional parameters were compared with both normal and CRF control rats. Results showed improvement of renal function, oxidative stress, antioxidant and inflammatory biomarkers as well as increased appetite and body weight gain on administration of both doses of walnut liquisolid formulation, F8.

Lipophilicity and hydrophobicity considerations in bio-enabling oral formulations approaches – a PEARRL review

Objectives

This review highlights aspects of drug hydrophobicity and lipophilicity as determinants of different oral formulation approaches with specific focus on enabling formulation technologies. An overview is provided on appropriate formulation selection by focussing on the physicochemical properties of the drug.

Key findings

Crystal lattice energy and the octanol–water partitioning behaviour of a poorly soluble drug are conventionally viewed as characteristics of hydrophobicity and lipophilicity, which matter particularly for any dissolution process during manufacturing and regarding drug release in the gastrointestinal tract. Different oral formulation strategies are discussed in the present review, including lipid-based delivery, amorphous solid dispersions, mesoporous silica, nanosuspensions and cyclodextrin formulations.

Summary

Current literature suggests that selection of formulation approaches in pharmaceutics is still highly dependent on the availability of technological expertise in a company or research group. Encouraging is that, recent advancements point to more structured and scientifically based development approaches. More research is still needed to better link physicochemical drug properties to pharmaceutical formulation design.

Mesoporous silica materials: From physico-chemical properties to enhanced dissolution of poorly water-soluble drugs

New approaches in pharmaceutical chemistry have resulted in more complex drug molecules in the quest to achieve higher affinity to their targets. However, these 'highly active' drugs can also suffer from poor water solubility. Hence, poorly water soluble drugs became a major challenge in drug formulation, and this problem is increasing, as currently about 40 of the marketed drugs and 90% of drug candidates are classified as poorly water soluble. Various approaches exist to circumvent poor water solubility and poor dissolution rate in aqueous environment, however, each having disadvantages and certain limitations. Recently, mesoporous silica materials (MSMs) have been proposed to be used as matrices for enhancing the apparent solubility and dissolution rate of different drug molecules. MSMs are ideal candidates for this purpose, as silica is a "generally regarded as safe" (GRAS) material, is biodegradable, and can be readily surface-modified in order to optimize drug loading and subsequent release in the human body. The major advantage of mesoporous silica as drug delivery systems (DDSs) for poorly water soluble drugs lies in their pore size, pore morphology, and versatility in alteration of the surface groups, which can result in optimized interactions between a drug candidate and MSM carrier by modifying the pore surfaces. Furthermore, the drug of interest can be loaded into these pores in a preferably amorphous state, which can increase the drug dissolution properties dramatically. The highlights of this review include a critical discussion about the modification of the physico-chemical properties of MSMs and how these physico-chemical modifications influence the drug loading and the subsequent dissolution of poorly water soluble drugs. It aims to further promote the use of MSMs as alternative strategy to common methods like solubility enhancement by cyclodextrins, micronization, or microemulsion techniques. This review can provide guidance on how to tailor MSMs to achieve optimized drug loading and drug dissolution.

Surface PEGylation of mesoporous silica materials via surface-initiated chain transfer free radical polymerization: Characterization and controlled drug release

As a new type of mesoporous silica materials with large pore diameter (pore size between 2 and 50nm) and high specific surface areas, SBA-15 has been widely explored for different applications especially in the biomedical fields. The surface modification of SBA-15 with functional polymers has demonstrated to be an effective way for improving its properties and performance. In this work, we reported the preparation of PEGylated SBA-15 polymer composites through surface-initiated chain transfer free radical polymerization for the first time. The thiol group was first introduced on SBA-15 via co-condensation with γ-mercaptopropyltrimethoxysilane (MPTS), that were utilized to initiate the chain transfer free radical polymerization using poly(ethylene glycol) methyl ether methacrylate (PEGMA) and itaconic acid (IA) as the monomers. The successful modification of SBA-15 with poly(PEGMA-co-IA) copolymers was evidenced by a series of characterization techniques, including ¹H NMR, FT-IR, TGA and XPS. The final SBA-15-SH- poly(PEGMA-co-IA) composites display well water dispersity and high loading capability towards cisplatin (CDDP) owing to the introduction of hydrophilic PEGMA and carboxyl groups. Furthermore, the CDDP could be released from SBA-15-SH-poly(PEGMA-co-IA)-CDDP complexes in a pH dependent behavior, suggesting the potential controlled drug delivery of SBA-15-SH-poly(PEGMA-co-IA). More importantly, the strategy should be also useful for fabrication of many other functional materials for biomedical applications owing to the advantages of SBA-15 and well monomer adoptability of chain transfer free radical polymerization.

Porous Inorganic Drug Delivery Systems-a Review

Innovative methods and materials have been developed to overcome limitations associated with current drug delivery systems. Significant developments have led to the use of a variety of materials (as excipients) such as inorganic and metallic structures, marking a transition from conventional polymers. Inorganic materials, especially those possessing significant porosity, are emerging as good candidates for the delivery of a range of drugs (antibiotics, anticancer and anti-inflammatories), providing several advantages in formulation and engineering (encapsulation of drug in amorphous form, controlled delivery and improved targeting). This review focuses on key selected developments in porous drug delivery systems. The review provides a short broad overview of porous polymeric materials for drug delivery before focusing on porous inorganic materials (e.g. Santa Barbara Amorphous (SBA) and Mobil Composition of Matter (MCM)) and their utilisation in drug dosage form development. Methods for their preparation and drug loading thereafter are detailed. Several examples of porous inorganic materials, drugs used and outcomes are discussed providing the reader with an understanding of advances in the field and realistic opportunities.

Influence of Surface Chemistry on Ibuprofen Adsorption and Confinement in Mesoporous Silicon Microparticles

The effect of adsorption and confinement on ibuprofen was studied by immersion loading the molecules into porous silicon (PSi) microparticles. The PSi microparticles were modified into thermally oxidized PSi (TOPSi) and thermally hydrocarbonized PSi (THCPSi) to evaluate the effects of the loading solvent and the surface chemistry on the obtainable drug payloads. The payloads, location, and the molecular state of the adsorbed drug were evaluated using thermal analysis. The results showed that after the adsorption of ∼800 mg/cm³ (w_drug/v_pores) of drug into the mesopores, depending on the solvent used in the immersion, the drug began to rapidly recrystallize on the external surface of the particles. Moderate concentrations, however, enabled payloads of 800-850 mg/cm³ without excessive surface crystallization, and thus, there was no need for rinsing the samples to remove the externally crystallized portion. The results showed that the confined ibuprofen forms nanocrystals inside of the mesopores after approximately 200 mg/cm³ payloads were obtained, accounting for half of the adsorbed drug amount. The presence of both crystalline and noncrystalline phases was further characterized using variable temperature solid-state nuclear magnetic resonance (NMR) measurements. The interactions between the drug molecules and the pore walls of TOPSi and THCPSi were observed using Fourier transform infrared and ¹H NMR spectroscopies, and the hydrogen bonding between the silanol groups of TOPSi and the adsorbed ibuprofen was confirmed, but having only limited effect on the overall state of the confined drug. In vitro drug permeation studies in Caco-2 and Caco-2/HT29 cocultures showed that the adsorption onto hydrophilic or hydrophobic PSi microparticles had no significant effects on the ibuprofen permeation, whether the drug was partially nanocrystalline or completely in a liquidlike state.