Chitosan and its derivatives as vehicles for drug delivery

Interaction-Based Perspective for Designing Polymer Biomaterial: A Strategic Approach to the Chitosan-Glycerophosphate System

The conventional approach for developing any polymeric biomaterial is to follow protocols available in the literature and/or perform trial-and-error runs without a scientific basis. Here, we propose an analysis of a complex overlay of molecular interactions between drugs and polymers that provides a strategic pathway for biomaterial development. First, this work provides an innovative interaction-based method for developing an ocular formulation involving in situ gelling chitosan, gelatin, and glycerophosphate systems. A systematic interaction study is conducted based on the measurement of hydrodynamic radius, zeta potential, and viscosity with the sequential addition of formulation components. The increase in the hydrodynamic radius of the polymer with the addition of drugs can be interpreted as better diffusion of the drug inside the charged polymer chains and vice versa. Based on the knowledge of these interactions, a formulation has been designed that shows better drug release results with extended and sustained release compared to literature protocols, hence accentuating the importance of this study. An in-depth analysis of interactions can lead to a better understanding of the system. Second, we demonstrate the development of two dual-drug biomaterial systems, i.e., an in situ gelling and a liquid formulation at ocular surface temperature from the same polymers, which can be used as an ocular antiglaucoma formulation. Prior knowledge of the interactions between the drug polymers can be used to design a better formulation. The demonstrated application of this interaction-based protocol development can be extended universally to any biomaterial. This would provide a comprehensive idea about the properties and interactions of polymers and drugs, which can also serve as a base/starting point for a new formulation/biomaterial development.

Chitosan functionalized doxorubicin loaded poly(methacrylamide) based copolymeric nanoparticles for enhanced cellular internalization and in vitro anticancer evaluation

Doxorubicin (Dox), a chemotherapeutic agent, encounters challenges such as a short half-life, dose-dependent toxicity, and low solubility. In this context, the present study involved the fabrication of N-(2-hydroxypropyl)methacrylamide (HPMA) and N-(3-aminopropyl)methacrylamide (APMA) bearing P(HPMA-s-APMA) copolymeric nanoparticles (P(HPMA-s-APMA) NPs) and their investigation for efficient delivery of Dox. Furthermore, the synthesized nanoparticles (NPs) were coated with chitosan (Cht) to generate positively charged nanoformulations. The prepared formulations were evaluated for particle size, morphology, surface charge analysis, percentage encapsulation efficiency (EE%), and drug release studies. The anticancer activity of Cht-P(HPMA-s-APMA)-Dox NPs was assessed in the HeLa cancer cell line. The prepared P(HPMA-s-APMA)-Dox NPs exhibited an average particle size of 240-250 nm. Chitosan decorated P(HPMA-s-APMA)-Dox NPs displayed a significant increase in particle size, and the zeta potential shifted from negative to positive. The EE% for Cht-P(HPMA-s-APMA)-Dox NPs was calculated to be 68.06 %. The drug release studies revealed a rapid release of drug from Cht-P(HPMA-s-APMA)-Dox NPs at pH 4.8 than pH 7.4, demonstrating the pH-responsiveness of nanoformulation. Furthermore, the cell viability assay and internalization studies revealed that Cht-P(HPMA-s-APMA)-Dox NPs had a high cytotoxic response and significant cellular uptake. Hence, the Cht-P(HPMA-s-APMA)-Dox NPs appeared to be a suitable nanocarrier for effective, and safe chemotherapy.

Chitosan nanoparticles loaded with Eucommia ulmoides seed essential oil: Preparation, characterization, antioxidant and antibacterial properties

Eucommia ulmoides seed essential oil (EUSO) is a natural plant oil rich in various nutrients, which has been widely used due to its unique medicinal effects. However, it is prone to oxidation and rancidity under many adverse environmental influences. Nanoencapsulation technology can protect and slow down the loss of its biological activity. In this study, chitosan nanoparticles (CSNPs) loaded with EUSO were prepared by emulsification and ionic gel technology. EUSO-CSNPs were characterized by Fourier transform infrared (FTIR) spectroscopy, Thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The results confirmed the success of EUSO encapsulation and the encapsulation rate ranged from 36.95 % to 67.80 %. Nanoparticle size analyzer, Scanning electron microscope (SEM) and Transmission electron microscopy (TEM) showed that CSNPs were spherical particles with a range of 200.6-276.0 nm. The results of in vitro release study indicated that the release of EUSO was phased, and EUSO-CSNPS had certain sustained-release properties. Furthermore, EUSO-CSNPs had higher antioxidant and antibacterial abilities than pure EUSO and chitosan, which was verified through free radical scavenging experiments and bacteria biofilm experiments, respectively. This technology can enhance the medicinal value of EUSO in biomedical and other fields, and will provide support for in vivo research of EUSO-CSNPs in the future.

Chitosan-graft-poly(lactic acid)/CD-MOFs degradable composite microspheres for sustained release of curcumin

The solubility of cyclodextrin metal-organic frameworks (CD-MOFs) in aqueous media making it not suitable as sustained-release drug carrier. Here, curcumin-loaded CD-MOFs (CD-MOFs-Cur) was embedded in chitosan-graft-poly(lactic acid) (CS-LA) via a solid-in-oil-in-oil (s/o/o) emulsifying solvent evaporation method forming the sustained-release composite microspheres. At CS-LA concentration of 20 mg/mL, the composite microspheres showed good sphericity. The average particle size of CS-LA/CD-MOFs-Cur (2:1), CS-LA/CD-MOFs-Cur (4:1) and CS-LA/CD-MOFs-Cur (6:1) composite microspheres was about 9.3, 12.3 and 13.5 μm, respectively. The above composite microspheres exhibited various degradation rates and curcumin release rates. Treating in HCl solution (pH 1.2) for 120 min, the average particle size of above microspheres reduced 28.19 %, 24.34 % and 6.19 %, and curcumin released 86.23 %, 78.37 % and 52.57 %, respectively. Treating in PBS (pH 7.4) for 12 h, the average particle size of above microspheres reduced 30.56 %, 26.56 % and 10.66 %, and curcumin released 68.54 %, 54.32 % and 31.25 %, respectively. Moreover, the composite microspheres had a favorable cytocompatibility, with cell viability of higher than 90 %. These composite microspheres open novel opportunity for sustained drug release of CD-MOFs.

Role of Polymer Concentration on the Release Rates of Proteins from Single- and Double-Network Hydrogels

Controlled delivery of proteins has immense potential for the treatment of various human diseases, but effective strategies for their delivery are required before this potential can be fully realized. Recent research has identified hydrogels as a promising option for the controlled delivery of therapeutic proteins, owing to their ability to respond to diverse chemical and biological stimuli, as well as their customizable properties that allow for desired delivery rates. This study utilized alginate and chitosan as model polymers to investigate the effects of hydrogel properties on protein release rates. The results demonstrated that polymer properties, concentration, and crosslinking density, as well as their responses to pH, can be tailored to regulate protein release rates. The study also revealed that hydrogels may be combined to create double-network hydrogels to provide an additional metric to control protein release rates. Furthermore, the hydrogel scaffolds were also found to preserve the long-term function and structure of encapsulated proteins before their release from the hydrogels. In conclusion, this research demonstrates the significance of integrating porosity and response to stimuli as orthogonal control parameters when designing hydrogel-based scaffolds for therapeutic protein release.

The important role of miR-1-3p in cancers

Cancer is a malignant tumor that seriously threatens human life and health. At present, the main treatment methods include surgical resection, chemotherapy, radiotherapy, and immunotherapy. However, the mechanism of tumor occurrence and development is complex, and it produces resistance to some traditional treatment methods, leading to treatment failure and a high mortality rate for patients. Therefore, exploring the molecular mechanisms of tumor occurrence, development, and drug resistance is a very important task. MiRNAs are a type of non-coding small RNA that regulate a series of biological effects by binding to the 3'-UTR of the target mRNA, degrading the mRNA, or inhibiting its translation. MiR-1-3p is an important member of them, which is abnormally expressed in various tumors and closely related to the occurrence and development of tumors. This article introduces miR-1-3p from multiple aspects, including its production and regulation, role in tumor occurrence and development, clinical significance, role in drug resistance, and approaches for targeting miR-1-3p. Intended to provide readers with a comprehensive understanding of the important role of miR-1-3p in tumors.

Biomaterials-mediated CRISPR/Cas9 delivery: recent challenges and opportunities in gene therapy

The use of biomaterials in delivering CRISPR/Cas9 for gene therapy in infectious diseases holds tremendous potential. This innovative approach combines the advantages of CRISPR/Cas9 with the protective properties of biomaterials, enabling accurate and efficient gene editing while enhancing safety. Biomaterials play a vital role in shielding CRISPR/Cas9 components, such as lipid nanoparticles or viral vectors, from immunological processes and degradation, extending their effectiveness. By utilizing the flexibility of biomaterials, tailored systems can be designed to address specific genetic diseases, paving the way for personalized therapeutics. Furthermore, this delivery method offers promising avenues in combating viral illnesses by precisely modifying pathogen genomes, and reducing their pathogenicity. Biomaterials facilitate site-specific gene modifications, ensuring effective delivery to infected cells while minimizing off-target effects. However, challenges remain, including optimizing delivery efficiency, reducing off-target effects, ensuring long-term safety, and establishing scalable production techniques. Thorough research, pre-clinical investigations, and rigorous safety evaluations are imperative for successful translation from the laboratory to clinical applications. In this review, we discussed how CRISPR/Cas9 delivery using biomaterials revolutionizes gene therapy and infectious disease treatment, offering precise and safe editing capabilities with the potential to significantly improve human health and quality of life.

The Application of Nanogels as Efficient Drug Delivery Platforms for Dermal/Transdermal Delivery

The delivery of active molecules via the skin seems to be an efficient technology, given the various disadvantages of oral drug administration. Skin, which is the largest human organ of the body, has the important role of acting as a barrier for pathogens and other molecules including drugs; in fact, it serves as a primary defense system blocking any particle from entering the body. Therefore, to overcome the skin barriers and poor skin permeability, researchers implement novel carriers which can effectively carry out transdermal delivery of the molecules. Another significant issue which medical society tries to solve is the effective dermal delivery of molecules especially for topical wound delivery. The application of nanogels is only one of the available approaches offering promising results for both dermal and transdermal administration routes. Nanogels are polymer-based networks in nanoscale dimensions which have been explored as potent carriers of poorly soluble drugs, genes and vaccines. The nanogels present unique physicochemical properties, i.e., high surface area, biocompatibility, etc., and, importantly, can improve solubility. In this review, authors aimed to summarize the available applications of nanogels as possible vehicles for dermal and transdermal delivery of active pharmaceutical ingredients and discuss their future in the pharmaceutical manufacturing field.

Chitosan/Alginate Polymeric Nanoparticle-Loaded α-Mangostin: Characterization, Cytotoxicity, and In Vivo Evaluation against Breast Cancer Cells

α-mangostin (Amg), a compound isolated from the mangosteen rind (Garcinia mangostana, L.), has demonstrated promising anticancer activity. However, its low solubility and selectivity against cancer cells limit its efficacy. To address this issue, researchers have developed chitosan/alginate polymeric nanoparticles (NANO-AMCAL) to enhance the effectiveness of Amg. In vitro studies have demonstrated that NANO-AMCAL is highly active against breast cancer cells. Therefore, an in vivo study was conducted to evaluate the efficacy of NANO-AMCAL in treating breast cancer in Wistar rats (Rattus norvegicus) and determine the effective dose. The rats were divided into seven treatment groups, including positive control, negative control, pure Amg, and NANO-AMCAL 5 mg, 10 mg, and 20 mg. The rats were injected subcutaneously with a carcinogenic agent, 7,12-dimethylbenz(a)anthracene (DMBA) and were evaluated for weight and tumor volume every three days during treatment. Surgery was performed on day 14, and histopathological studies were carried out on breast and lung cancer tissues. The results showed that NANO-AMCAL significantly enhanced the anticancer activity of Amg in treating breast cancer in Wistar rats. NANO-AMCAL containing 0.33 mg of Amg had a healing effect three times better than 20 mg pure Amg and was comparable to tamoxifen. The effective dose of NANO-AMCAL for anti-breast cancer treatment in Wistar rats was found to be 20 mg, which exhibited a good healing response, and the tumor volume continued to decrease up to 17.43% on the 14th day. Furthermore, histopathological tests showed tissue repair and no metastases. These findings suggest that NANO-AMCAL may be a promising therapeutic option for breast cancer treatment.

Advances in Polysaccharide- and Synthetic Polymer-Based Vitreous Substitutes

The vitreous humour is a gel-like structure that composes the majority of each eye. It functions to provide passage of light, be a viscoelastic dampener, and hold the retina in place. Vitreous liquefaction causes retinal detachment and retinal tears requiring pars plana vitrectomy for vitreous substitution. An ideal vitreous substitute should display similar mechanical, chemical, and rheological properties to the natural vitreous. Currently used vitreous substitutes such as silicone oil, perfluorocarbon liquids, and gases cannot be used long-term due to adverse effects such as poor retention time, cytotoxicity, and cataract formation. Long-term, experimental vitreous substitutes composed of natural, modified and synthetic polymers are currently being studied. This review discusses current long- and short-term vitreous substitutes and the disadvantages of these that have highlighted the need for an ideal vitreous substitute. The review subsequently focuses specifically on currently used polysaccharide- and synthetic polymer-based vitreous substitutes, which may be modified or functionalised, or employed as the derivative, and discusses experimental vitreous substitutes in these classes. The advantages and challenges associated with the use of polymeric substitutes are discussed. Innovative approaches to vitreous substitution, namely a novel foldable capsular vitreous body, are presented, as well as future perspectives related to the advancement of this field.

Improvement of Therapeutic Value of Quercetin with Chitosan Nanoparticle Delivery Systems and Potential Applications

This paper reviews recent studies investigating chitosan nanoparticles as drug delivery systems for quercetin. The therapeutic properties of quercetin include antioxidant, antibacterial and anti-cancer potential, but its therapeutic value is limited by its hydrophobic nature, low bioavailability and fast metabolism. Quercetin may also act synergistically with other stronger drugs for specific disease states. The encapsulation of quercetin in nanoparticles may increase its therapeutic value. Chitosan nanoparticles are a popular candidate in preliminary research, but the complex nature of chitosan makes standardisation difficult. Recent studies have used in-vitro, and in-vivo experiments to study the delivery of quercetin alone or in combination with another active pharmaceutical ingredient encapsulated in chitosan nanoparticles. These studies were compared with the administration of non-encapsulated quercetin formulation. Results suggest that encapsulated nanoparticle formulations are better. In-vivo or animal models simulated the type of disease required to be treated. The types of diseases were breast, lung, liver and colon cancers, mechanical and UVB-induced skin damage, cataracts and general oxidative stress. The reviewed studies included various routes of administration: oral, intravenous and transdermal routes. Although toxicity tests were often included, it is believed that the toxicity of loaded nanoparticles needs to be further researched, especially when not orally administered.

Advances in polymer-based cell encapsulation and its applications in tissue repair

Cell microencapsulation is a more widely accepted area of biological encapsulation. In most cases, it involves fixing cells in polymer scaffolds or semi-permeable hydrogel capsules, providing the environment for protecting cells, allowing the exchange of nutrients and oxygen, and protecting cells against the attack of the host immune system by preventing the entry of antibodies and cytotoxic immune cells. Hydrogel encapsulation provides a three-dimensional (3D) environment similar to that experienced in vivo, so it can maintain normal cellular functions to produce tissues similar to those in vivo. Embedded cells can be genetically modified to release specific therapeutic products directly at the target site, thereby eliminating the side effects of systemic treatments. Cellular microcarriers need to meet many extremely high standards regarding their biocompatibility, cytocompatibility, immunoseparation capacity, transport, mechanical, and chemical properties. In this article, we discuss the biopolymer gels used in tissue engineering applications and the brief introduction of cell encapsulation for therapeutic protein production. Also, we review polymer biomaterials and methods for preparing cell microcarriers for biomedical applications. At the same time, in order to improve the application performance of cell microcarriers in vivo, we also summarize the main limitations and improvement strategies of cell encapsulation. Finally, the main applications of polymer cell microcarriers in regenerative medicine are summarized.

Self-assembled FGF21 nanoparticles alleviate drug-induced acute liver injury

Acetaminophen (N-acetyl-p-aminophenol, APAP) is a common antipyretic agent and analgesic. An overdose of APAP can result in acute liver injury (ALI). Oxidative stress and inflammation are central to liver injury. N-acetylcysteine (NAC), a precursor of glutathione, is used commonly in clinical settings. However, the window of NAC treatment is limited, and more efficacious alternatives must be found. Endogenous cytokines such as fibroblast growth factor (FGF) 21 can improve mitochondrial function while decreasing intracellular oxidative stress and inflammatory responses, thereby exhibiting antioxidant-like effects. In this study, self-assembled nanoparticles comprising chitosan and heparin (CH) were developed to deliver FGF21 (CH-FGF21) to achieve the sustained release of FGF21 and optimize the in vivo distribution of FGF21. CH-FGF21 attenuated the oxidative damage and intracellular inflammation caused by APAP to hepatocytes effectively. In a murine model of APAP-induced hepatotoxicity, CH-FGF21 could alleviate ALI progression and promote the recovery of liver function. These findings demonstrated that a simple assembly of CH nanoparticles carrying FGF21 could be applied for the treatment of liver diseases.

Review targeted drug delivery systems for norcantharidin in cancer therapy

Norcantharidin (NCTD) is a demethylated derivative of cantharidin (CTD), the main anticancer active ingredient isolated from traditional Chinese medicine Mylabris. NCTD has been approved by the State Food and Drug Administration for the treatment of various solid tumors, especially liver cancer. Although NCTD greatly reduces the toxicity of CTD, there is still a certain degree of urinary toxicity and organ toxicity, and the poor solubility, short half-life, fast metabolism, as well as high venous irritation and weak tumor targeting ability limit its widespread application in the clinic. To reduce its toxicity and improve its efficacy, design of targeted drug delivery systems based on biomaterials and nanomaterials is one of the most feasible strategies. Therefore, this review focused on the studies of targeted drug delivery systems combined with NCTD in recent years, including passive and active targeted drug delivery systems, and physicochemical targeted drug delivery systems for improving drug bioavailability and enhancing its efficacy, as well as increasing drug targeting ability and reducing its adverse effects.

Graphical Abstract

Recent Progress on Tailoring the Biomass-Derived Cellulose Hybrid Composite Photocatalysts

Biomass-derived cellulose hybrid composite materials are promising for application in the field of photocatalysis due to their excellent properties. The excellent properties between biomass-derived cellulose and photocatalyst materials was induced by biocompatibility and high hydrophilicity of the cellulose components. Biomass-derived cellulose exhibited huge amount of electron-rich hydroxyl group which could promote superior interaction with the photocatalyst. Hence, the original sources and types of cellulose, synthesizing methods, and fabrication cellulose composites together with applications are reviewed in this paper. Different types of biomasses such as biochar, activated carbon (AC), cellulose, chitosan, and chitin were discussed. Cellulose is categorized as plant cellulose, bacterial cellulose, algae cellulose, and tunicate cellulose. The extraction and purification steps of cellulose were explained in detail. Next, the common photocatalyst nanomaterials including titanium dioxide (TiO₂), zinc oxide (ZnO), graphitic carbon nitride (g-C₃N₄), and graphene, were introduced based on their distinct structures, advantages, and limitations in water treatment applications. The synthesizing method of TiO₂-based photocatalyst includes hydrothermal synthesis, sol-gel synthesis, and chemical vapor deposition synthesis. Different synthesizing methods contribute toward different TiO₂ forms in terms of structural phases and surface morphology. The fabrication and performance of cellulose composite catalysts give readers a better understanding of the incorporation of cellulose in the development of sustainable and robust photocatalysts. The modifications including metal doping, non-metal doping, and metal-organic frameworks (MOFs) showed improvements on the degradation performance of cellulose composite catalysts. The information and evidence on the fabrication techniques of biomass-derived cellulose hybrid photocatalyst and its recent application in the field of water treatment were reviewed thoroughly in this review paper.

Recent Advances of Chitosan Formulations in Biomedical Applications

Chitosan, a naturally abundant cationic polymer, is chemically composed of cellulose-based biopolymers derived by deacetylating chitin. It offers several attractive characteristics such as renewability, hydrophilicity, biodegradability, biocompatibility, non-toxicity, and a broad spectrum of antimicrobial activity towards gram-positive and gram-negative bacteria as well as fungi, etc., because of which it is receiving immense attention as a biopolymer for a plethora of applications including drug delivery, protective coating materials, food packaging films, wastewater treatment, and so on. Additionally, its structure carries reactive functional groups that enable several reactions and electrochemical interactions at the biomolecular level and improves the chitosan’s physicochemical properties and functionality. This review article highlights the extensive research about the properties, extraction techniques, and recent developments of chitosan-based composites for drug, gene, protein, and vaccine delivery applications. Its versatile applications in tissue engineering and wound healing are also discussed. Finally, the challenges and future perspectives for chitosan in biomedical applications are elucidated.

Preparation of PEI-modified nanoparticles by dopamine self-polymerization for efficient DNA delivery

Achieving efficient and safe gene delivery is great of significance to promote the development of gene therapy. In this work, a polydopamine (PDA) layer was coated on the surface of Fe₃ O₄ nanoparticles (NPs) by dopamine (DA) self-polymerization, and then magnetic Fe₃ O₄ NPs were prepared by the Michael addition between amino groups in polyethyleneimine (PEI) and PDA. The prepared Fe₃ O₄ NPs (named Fe₃ O₄ @PDA@PEI) were characterized by FTIR, atomic force microscopy (AFM) and scanning electron microscope (SEM). As an efficient and safe gene carrier, the potential of Fe₃ O₄ @PDA@PEI was evaluated by agarose gel electrophoresis, MTT assay, fluorescence microscopy, flow cytometry. The results shows that the Fe₃ O₄ @PDA@PEI NPs is stable hydrophilic nanoparticles with a particle size of 50-150 nm. It can efficiently condense DNA at low N/P ratios and protect it from nuclease degradation. In addition, the Fe₃ O₄ @PDA@PEI NPs has higher safety than PEI. Further, the Fe₃ O₄ @PDA@PEI/DNA polyplexes could be effectively absorbed by cells and successfully transfected, and exhibit higher cellular uptake and gene transfection efficiency than PEI/DNA polyplexes. The findings indicate that the Fe₃ O₄ @PDA@PEI NPs has the potential to be developed into a novel gene vector. This article is protected by copyright. All rights reserved.

Association of Indocyanine Green with Chitosan Oleate Coated PLGA Nanoparticles for Photodynamic Therapy

Indocyanine green (ICG) is a safe dye widely used in the biomedical field. Its photodynamic effect (PDT), originating from laser irradiation at 803 nm, opens interesting perspectives in theranostic applications. To overcome its low water stability, ICG can be shielded with nanoparticles (NPs). In this work, previously developed NPs based on poly lactic-co-glycolic acid (PLGA) coated with chitosan oleate (CS-OA) and loaded with resveratrol as a hydrophobic model drug have been proposed as an ICG carrier. These systems have been selected for their observed immunostimulatory properties. The possible loading of the dye by adsorption onto NP surface by electrostatic interaction was studied here in comparison with the encapsulation into the PLGA core. The ICG-chitosan (CS) interaction has been characterized by spectrophotometry, spectroscopy and in-cell in vitro assays. Fluorescence quenching was observed due to the ionic interaction between ICG and CS and was studied considering the dye:polymer stoichiometry and the effect of the NP dilution in cell culture medium (DMEM). The NP systems have been compared in vitro, assessing their behaviour in Caco-2 cell lines. A reduction in cell viability was observed after irradiation of ICG associated with NPs, evident also for the samples loaded by adsorption. These findings open the opportunity to exploit the association of PDT’s effect on ICG with the properties of CS-OA coated NPs, whose immunostimulatory effect can be associated with PDT mechanism in cancer therapy.

Preparation of an Intelligent pH Film Based on Biodegradable Polymers for Monitoring the Food Quality and Reducing the Microbial Contaminants

Hydrogel refers to a three-dimensional cross-linked polymeric network made of synthetic or natural polymers that can hold water in its porous structure. The inclusion of hydrophilic groups in the polymer chains, such as amino, carboxyl, and hydroxyl groups, contributes to the hydrogel's water-holding ability. At physiological temperature and pH, these polymeric materials do not dissolve in water, but they do swell significantly in aqueous media. Hydrogel can be manufactured out of almost any water-soluble polymer, and it comes in a variety of chemical compositions and bulk physical properties. Hydrogel can also be made in a variety of ways. Hydrogel comes in a variety of physical shapes, including slabs, microparticles, nanoparticles, coatings, and films. Due to its ease of manufacture and self-application in clinical and fundamental applications, hydrogel has been widely exploited as a drug carrier. Contact lenses, artificial corneas, wound dressing, suture coating, catheters, and electrode sensors are some of the biomedical applications of hydrogels. The pigment color changes were observed from colorless to pale pink followed by dark reddish-pink. Anthocyanin was produced in large quantities and tested using a UV-visible spectrophotometer. At 450-550 nm, the largest peak (absorbance) was detected, indicating the presence of anthocyanin. The FTIR analysis of this study shows the different stretches of bonds at different peaks: 2918.309 (-C-H alkane stretch), 2812.12 (-C-H aldehyde weak intensity), 192320.37/cm (C-O bend), 21915.50, 2029.08/cm (-C=C arene group), 1906.94/cm (=C-H aromatics), 1797.78/cm (=C-H), 1707.94 (-C=O ketene), 1579.70, 1382.96 (C-H alkane strong bend), 889.18/cm (C-H aromatics plane bend), and 412.77/cm (-C-CI strong bond). The spectra of the PVA/chitosan film depict the peak's formation: 1571.88, 1529.55, 1500.62/cm (C-H alkene strong bend), 1492.90, 1483.26, 1467.83/cm (C-H alkene strong bond), 670.48, 443.63, 412.77/cm (-O-H carboxylic acids with great intensity), 1708.93 (-C=O ketone), and 1656.0/cm (alkenyl C=C stretch strong bond).

Nanotechnology in diagnosis and therapy of gastrointestinal cancer

Advances in nanotechnology have opened new frontiers in the diagnosis and treatment of cancer. Nanoparticle-based technology improves the precision of tumor diagnosis when combined with imaging, as well as the accuracy of drug target delivery, with fewer side effects. Optimized nanosystems have demonstrated advantages in many fields, including enhanced specificity of detection, reduced toxicity of drugs, enhanced effect of contrast agents, and advanced diagnosis and therapy of gastrointestinal (GI) cancers. In this review, we summarize the current nanotechnologies in diagnosis and treatment of GI cancers. The development of nanotechnology will lead to personalized approaches for early diagnosis and treatment of GI cancers.

The Use of Chitosan-Coated Nanovesicles in Repairing Alcohol-Induced Damage of Liver Cells in Mice

Background and Objectives In the past few decades, the studies concerning the natural polysaccharide chitosan have been centered on a new direction: its hepatoprotective action. The aim of our study was to evaluate the influence of previously designed chitosan lipid vesicles on the liver damage induced by alcohol consumption in mice. Materials and Methods The study involved the oral administration of substances in one daily dose as follows: Group 1 (control): water; Group 2 (control alcohol): 5% alcohol in water; Group 3 (CHIT): 0.1 mL/10 g body weight chitosan solution in animals treated with alcohol; Group 4 (CHIT-ves): 0.1 mL/10 g body chitosan vesicles in animals treated with alcohol; Group 5 (AcA): 200 mg/kg body ascorbic acid in animals treated with alcohol. In order to evaluate liver damage after alcohol consumption, the following hematological parameters were tested: the activity of alanine aminotransferase, aspartate aminotransferase and lactate dehydrogenase; serum values of urea and creatinine; the phagocytic capacity of polymorphonuclear neutrophilsin peripheral blood;serum opsonic capacity;bactericidal capacity of peritoneal macrophages; and the activity of malondialdehyde, glutathione peroxidase, superoxide dismutase and lactate dehydrogenase. Results and Conclusions The treatment with chitosan vesicles decreased liver enzyme activity and reduced the oxidative stress disturbances in alcoholic mice, thus repairing the hepatic functional and structural damages. These beneficial activities of chitosan vesicles were comparable with ascorbic acid effects in alcoholic mice.

A review on plant polysaccharide based on drug delivery system for construction and application, with emphasis on traditional Chinese medicine polysaccharide

Carbohydrate polymers with unique chemical composition, molecular weight and functional chemical groups show multiple potentials in drug delivery. Most carbohydrate polymers such as plant polysaccharides exhibit advantages of biodegradability, ease of modification, low immunogenicity and low toxicity. They can be conjugated, cross-linked or functionally modified, and then used as nanocarrier materials. Polysaccharide drug delivery system can avoid the phagocytosis of the reticuloendothelial system, prevent the degradation of biomolecules, and increase the bioavailability of small molecules, thus exerting effective therapeutic effects. Therefore, they have been fully explored. In this paper, we reviewed the construction methods of drug delivery systems based on carbohydrate polymers (astragalus polysaccharide, angelica polysaccharide, lycium barbarum polysaccharide, ganoderma lucidum polysaccharide, bletilla polysaccharide, glycyrrhiza polysaccharide, and epimedium polysaccharides, etc). The application of polysaccharide drug delivery systems to deliver small molecule chemotherapeutic drugs, gene drugs, and metal ion drugs was also briefly introduced. At the same time, the role of the polysaccharide drug delivery system in tumor treatment, targeted therapy, and wound healing was discussed. In addition, the research of polysaccharide delivery systems based on the therapeutic efficacy of traditional Chinese medicine was also summarized and prospected.

Nano vaccines for T. gondii Ribosomal P2 Protein With Nanomaterials as a Promising DNA Vaccine Against Toxoplasmosis

Caused by Toxoplasma gondii, toxoplasmosis has aroused great threats to public health around the world. So far, no effective vaccine or drug is commercially available, and the demands for a safe and effective therapeutic strategy have become more and more urgent. In the current study, we constructed a DNA vaccine encoding T. gondii ribosomal P2 protein (TgP2) and denoted as TgP2-pVAX1 plasmid. To improve the immunoprotection, nanomaterial poly-lactic-co-glycolic acid (PLGA) and chitosan were used as the delivery vehicle to construct TgP2-pVAX1/PLGA and TgP2-pVAX1/CS nanospheres. Before vaccinations in BALB/c mice, TgP2-pVAX1 plasmids were transiently transfected into Human Embryonic Kidney (HEK) 293-T cells, and the expression of the eukaryotic plasmids was detected by laser confocal microscopy and Western blotting. Then the immunoprotection of naked DNA plasmids and their two nano-encapsulations were evaluated in the laboratory animal model. According to the investigations of antibody, cytokine, dendritic cell (DC) maturation, molecule expression, splenocyte proliferation, and T lymphocyte proportion, TgP2-pVAX1 plasmid delivered by two types of nanospheres could elicit a mixed Th1/Th2 immune response and Th1 immunity as the dominant. In addition, TgP2-pVAX1/PLGA and TgP2-pVAX1/CS nanospheres have great advantages in enhancing immunity against a lethal dose of T. gondii RH strain challenge. All these results suggested that TgP2-pVAX1 plasmids delivered by PLGA or chitosan nanomaterial could be promising vaccines in resisting toxoplasmosis and deserve further investigations and applications.

Design strategies for antiviral coatings and surfaces: A review☆

The routine disinfection and sanitization of surfaces, objects, and textiles has become a time-consuming but necessary task for managing the COVID-19 pandemic. Nonetheless, the excessive use of sanitizers and disinfectants promotes the development of antibiotic-resistant microbes. Moreover, that improper disinfection could lead to more virus transfer, which leads to more viral mutations. Recently developed antiviral surface coatings can reduce the reliance on traditional disinfectants. These surfaces remain actively antimicrobial between periods of active cleaning of the surfaces, allowing a much more limited and optimized use of disinfectants. The novel nature of these surfaces has led, however, to many inconsistencies within the rapidly growing literature. Here we provide tools to guide the design and development of antimicrobial and antiviral surfaces and coatings. We describe how engineers can best choose testing options and propose new avenues for antiviral testing. After defining testing protocols, we summarize potential inorganic and organic materials able to serve as antiviral surfaces and present their antiviral mechanisms. We discuss the main limitations to their application, including issues related to toxicity, antimicrobial resistance, and environmental concerns. We propose solutions to counter these limitations and highlight how the context of specific use of an antiviral surface must guide material selection. Finally, we discuss how the use of coatings that combine multiple antimicrobial mechanisms can avoid the development of antibiotic resistance and improve the antiviral properties of these surfaces.

Synthesis, characterization, and anti-tumor properties of O-benzoylselenoglycolic chitosan

This study introduces a facile method for synthesizing O-benzoylselenoglycolic chitosan with a high selenium concentration of 45.32 mg/g. The characterizations of the chemical structure via FTIR, ¹H NMR, ¹³C NMR, TGA, and XRD analyses indicated that benzoylselenoglycolic acid was successfully grafted onto the C6 hydroxyl group of chitosan. The anti-cancer activity of the O-benzoylselenoglycolic chitosan was investigated in vitro using a HepG2 cell model, and the results indicated that it has excellent anticancer activity against HepG2 cancer cells with an IC₅₀ value of 0.53 μg/mL while exhibiting non-toxicity against normal cells (L-02). Furthermore, a mechanistic study revealed that the O-benzoylselenoglycolic chitosan could induce early apoptosis, G2/M, S phase arrest, and activation of caspase-3 activity to inhibit the HepG2 cell growth. This study has led to novel organic selenium species, and the results suggest its potential to be used as an effective ingredient for cancer prevention and therapy in the food and pharmaceutical fields.

l-asparaginase: Need for an Expedition from an Enzymatic Molecule to Antimicrobial Drug

Enzymes play a vital role in the biological system as a catalyst for biochemical reactions. They have a wide range of commercial applications in many areas like the pharmaceutical industry, food industry, etc. l-asparaginase is one of the commercial enzymes with prime importance in anticancer therapy. It is mainly used in chemotherapy; however, it has the potential to cure autoimmune disorders and infectious diseases also. Previous studies reported the antimicrobial potential of l-asparaginase. Therefore, we have discussed the possibility and challenges of the antimicrobial application of l-asparaginase in the treatment of infectious diseases. This is followed by a discussion on the effective delivery of this enzyme using biopolymeric nanocarriers that ensure safe and on target action. The present article gives a perspective on the l-asparaginase molecule that could be developed/established as an approved antimicrobial drug in the future.

Advances in Chitosan-Based Nanoparticles for Drug Delivery

Nanoparticles (NPs) have an outstanding position in pharmaceutical, biological, and medical disciplines. Polymeric NPs based on chitosan (CS) can act as excellent drug carriers because of some intrinsic beneficial properties including biocompatibility, biodegradability, non-toxicity, bioactivity, easy preparation, and targeting specificity. Drug transport and release from CS-based particulate systems depend on the extent of cross-linking, morphology, size, and density of the particulate system, as well as physicochemical properties of the drug. All these aspects have to be considered when developing new CS-based NPs as potential drug delivery systems. This comprehensive review is summarizing and discussing recent advances in CS-based NPs being developed and examined for drug delivery. From this point of view, an enhancement of CS properties by its modification is presented. An enhancement in drug delivery by CS NPs is discussed in detail focusing on (i) a brief summarization of basic characteristics of CS NPs, (ii) a categorization of preparation procedures used for CS NPs involving also recent improvements in production schemes of conventional as well as novel CS NPs, (iii) a categorization and evaluation of CS-based-nanocomposites involving their production schemes with organic polymers and inorganic material, and (iv) very recent implementations of CS NPs and nanocomposites in drug delivery.

Anticancer Effect of Alginate-Chitosan Hydrogel Loaded with Curcumin and Chrysin on Lung and Breast Cancer Cell Lines

OBJECTIVE

We conducted the present study to investigate the anticancer effects of curcumin and chrysin loaded in the alginate-chitosan hydrogel on breast cancer (T47D) and lung cancer (A549).

BACKGROUND

Cancer, which is defined as abnormal cell growth, is one of the biggest public health problems in the world. Natural compounds, such as polyphenols, are used as chemo-preventive and chemotherapeutic agents in different types of cancer owing to their antioxidant, antineoplastic, and cytotoxic properties. To improve their bioavailability and releasing behavior, hydrogel systems with high drug loading and stability and hydrophilic nature have been designed.

METHODS

The curcumin-chrysin-loaded alginate-chitosan hydrogels were prepared through the ionic gelation mechanism utilizing CaCl2. The prepared hydrogels were studied by using the Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The MTT and DAPI staining assays were employed for cytotoxicity and apoptosis studies of curcumin-chrysin-loaded alginate-chitosan hydrogels. The effects of the curcumin-chrysin-loaded alginate-chitosan hydrogels on the cell cycle of cell lines T47D and A549 were also evaluated using the propidium iodide staining.

RESULTS

The FTIR indicated specific bands at 1607 and 1422 cm-1 (the carbonyl of alginate) at 834 cm-1 (sodium alginate), 1447 cm-1, and 1026 cm-1 (COOH and C-O stretching bands alginate and chitosan). The curcumin-chrysin-loaded alginate-chitosan hydrogels could significantly (p<0.05) reduce the viability and induce apoptosis, Morover, cause G2/M arrest of the cell cycle in both A549 and T47D cell lines.

CONCLUSION

The alginate-chitosan hydrogels could work best as an enhanced anticancer drug delivery system.

Assessing the potential use of chitosan scaffolds for the sustained localized delivery of vitamin D

Vitamin D is a commonly used bone modulator in regenerative medicine. Several modalities have been explored for the delivery of vitamin D including nanoparticles and scaffold. The present study aimed to assess the potential use of a bio-degradable chitosan scaffold for the delivery of vitamin D. The objectives included fabrication of a bio-degradable chitosan scaffold, integration of vitamin D into the scaffold, characterization of the vitamin D integrated scaffold. Characterization was carried out using, X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry. The structure of the scaffold was assessed by scanning electron microscopy. The scaffold was placed in phosphate buffer saline and the release duration of vitamin D was observed using UV spectrophotometry. Dental pulp mesenchymal stem cells were added to the scaffold to study the scaffold associated toxicity and the functionality of the scaffold released vitamin D. The vitamin D release period from the scaffold was estimated to be for 80 hrs. MTT assay of the stem cells was comparable to that of the control group (stem cells cultured in media) inferring that the scaffold is not toxic towards the stem cells. The positive alizarin red S staining, a higher expression of alkaline phosphatase, osteocalcin, and RunX2 confirmed the functional capability (osteogenic differentiation of the stem cells) of the released vitamin D. Based on the data from the present study, it can be inferred that chitosan scaffold can be used for the sustained delivery of functional vitamin D for 3-5 days.

Chitosan Nanomedicine in Cancer Therapy: Targeted Delivery and Cellular Uptake

Nanomedicine has gained much attention for the management and treatment of cancers due to the distinctive physicochemical properties of the drug-loaded particles. Chitosan's cationic nature is attractive for the development of such particles for drug delivery, transfection, and controlled release. The particle properties can be improved by modification of the polymer or the particle themselves. The physicochemical properties of chitosan particles are analyzed in 126 recent studies, which allows to highlight their impact on passive and active targeted drug delivery, cellular uptake, and tumor growth inhibition (TGI). From 2012 to 2019, out of 40 in vivo studies, only 4 studies are found reporting a reduction in tumor size by using chitosan particles while all other studies reported tumor growth inhibition relative to controls. A total of 23 studies are analyzed for cellular uptake including 12 studies reporting cellular uptake mechanisms. Understanding and exploiting the processes involved in targeted delivery, endocytosis, and exocytosis by controlling the physicochemical properties of chitosan particles are important for the development of safe and efficient nanomedicine. It is concluded based on the recent literature available on chitosan particles that combination therapies can play a pivotal role in transformation of chitosan nanomedicine from bench to bedside.

Nanoparticle-Mediated Delivery of Inhaled Immunotherapeutics for Treating Lung Metastasis

Despite the critical breakthrough achieved by immune checkpoint blockade (ICB), the clinical benefits are usually restricted by inefficient infiltration of immune cells and immune-associated adverse effects. Noninvasive aerosol inhalation, as a definitive procedure for treatment of respiratory diseases, for ICB immunotherapy against lung metastasis, has not been realized to the best knowledge. Herein, an inhaled immunotherapeutic chitosan (CS)-antibody complex is developed for immunotherapy against lung cancer. In this system, CS is used as a carrier to assemble with anti-programmed cell death protein ligand 1 (aPD-L1) to enable efficient transmucosal delivery. Moreover, CS exhibits adjuvant effects to drive potent immune responses via activating the cyclic-di-GMP-AMP synthase (cGAS)-stimulator of interferon genes (STING) pathway. Interestingly, repeated inhalation of CS/aPD-L1 complex can effectively activate the immune system by promoting the infiltration of different immune cells especially CD8⁺ T cells around tumor lesions, and finally prolongs the survival of mice to 60 days. Thus, the work presents a unique aerosol inhalation delivery system for ICB antibody, which is promising for immunotherapy against lung metastasis without the concern of systemic toxicity.

A Review: Uses of Chitosan in Pharmaceutical Forms

Chitosan is a natural polysaccharide widespread in nature. It has many unique and attractive properties for the pharmaceutical field: it is biodegradable, safe, hypoallergenic, biocompatible with the body, free of toxicity, with proven anticholesterolemic, antibacterial, and antimycotic action. In this review we highlighted the physical, chemical, mechanical, mucoadhesive, etc. properties of chitosan to be taken into account when obtaining various pharmaceutical forms. The methods by which the pharmaceutical forms based on chitosan are obtained are very extensive, and in this study only the most common ones were presented.

pH-responsive polymeric micelles self-assembled from benzoic-imine-containing alkyl-modified PEGylated chitosan for delivery of amphiphilic drugs

In order to efficiently promote loading efficiency and aqueous photostability of indocyanine green (ICG), an amphiphilic tricarbocyanine dye, the polysaccharide-based nanomicelles utilized as a vehicle for ICG were fabricated by self-assembly of the amphiphilic benzoic-imine-containing PEGylated chitosan/4-(dodecyloxy)benzaldehyde (DBA) conjugates in aqueous solution of pH 7.4. The resulting polymeric micelles were characterized to have a hydrophobic hybrid chitosan/DBA core surrounded by hydrophilic PEG shells. Importantly, the encapsulation of ICG into the hybrid chitosan/DBA core of polymeric micelles by the combined hydrophobic and electrostatic interactions not only promoted the ICG loading but also enhanced its aqueous photostability. With the pH of micelle suspension being reduced from 7.4 to 5.0, upon acid-triggered cleavage of benzoic-imine bonds between chitosan and DBA as well as the extending of the protonated chitosan segments from hybrid cores toward aqueous phase, the rather hydrophobic DBA-rich core was formed within micelles, thereby leading to shrinking of the polymeric micelles. The robust ICG-loaded polymeric micelles showed several superior properties including the inhibition of ICG leakage under the mimic physiological and acidic conditions, favorable biocompatibility and photo-activated hyperthermia effect. This work suggests that the pH-responsive ICG-carrying chitosan-based micelles display great potential in cancer theranostic.

A Review of Biodegradable Natural Polymer-Based Nanoparticles for Drug Delivery Applications

Biodegradable natural polymers have been investigated extensively as the best choice for encapsulation and delivery of drugs. The research has attracted remarkable attention in the pharmaceutical industry. The shortcomings of conventional dosage systems, along with modified and targeted drug delivery methods, are addressed by using polymers with improved bioavailability, biocompatibility, and lower toxicity. Therefore, nanomedicines are now considered to be an innovative type of medication. This review critically examines the use of natural biodegradable polymers and their drug delivery systems for local or targeted and controlled/sustained drug release against fatal diseases.

Chitosan: A compound for drug delivery system in gastric cancer-a review

Gastric cancer is known as the fourth most common cancer and the second main cause of cancer-related deaths. Gastric cancer has some characteristics including high incidence rates of metastasis and mortality as well as low rates of early diagnosis, radical resection and 5-year survival. Radical surgery and following chemotherapy has been done for patients with early gastric cancer leading to 90 % survival rate in 5-year after operation. Besides, in advanced stage some cases don't have the chance of surgery as well as the risk of metastasis is high in these patients overally leading to poor prognosis. In recent years, finding a suitable drug delivery system for chemotherapeutic drugs in gastric cancer is an considerable subject for researchers. Chitosan is known as an appropriate compound for chemo-drug delivery in cancer treatment due to its high biodegradability and biocompatibility. Moreover, trans-mucosal drug delivery is facilitated by chitosan via its mucoadhesive and cationic features enhancing interaction with mucous membrane. In addition, a large amount of experimental evidence has reported the efficacy of chitosan for drug delivery in gastric cancer. Thus, the aim of this article was to review this evidence as well as new chitosan-based drug delivery systems investigated in gastric cancer.

Chitosan Nanoparticles for Therapy and Theranostics of Hepatocellular Carcinoma (HCC) and Liver-Targeting

Chitosan nanoparticles are well-known delivery systems widely used as polymeric carriers in the field of nanomedicine. Chitosan is a carbohydrate of natural origin: it is a biodegradable, biocompatible, mucoadhesive, polycationic polymer and it is endowed with penetration enhancer properties. Furthermore, it can be easily derivatized. Hepatocellular carcinoma (HCC) represents a remarkable health problem because current therapies, that include surgery, liver transplantation, trans-arterial embolization, chemoembolization and chemotherapy, present significant limitations due to the high risk of recurrence, to a lack of drug selectivity and to other serious side effects. Therefore, there is the need for new therapeutic strategies and for improving the liver-targeting to HCC. Nanomedicine consists in the use of nanoscale carriers as delivery systems to target and deliver drugs and/or diagnostic agents to specific organs or tissues. Chitosan and its derivatives can be successfully used in the preparation of nanoparticles that, for their peculiar surface-properties, can specifically interact with liver tumor, by passive and active targeting. This review concerns the use of chitosan nanoparticles for the therapy and theranostics of HCC and liver-targeting.

Efficacy of bioactive nanoparticles on tissue-endotoxin induced suppression of stem cell viability, migration and differentiation

AIM

To characterize a lipopolysaccharide (LPS)-treated dentine tissue model (LPS dentine) to analyse the efficacy of polycationic chitosan nanoparticles (CSnp) and/or dexamethasone conjugate chitosan nanoparticles (Dex-CSnp) on the viability/differentiation potential of stem cells from apical papilla (SCAP) when exposed to LPS dentine. A further aim was to understand the effect of macrophage-dependent inflammation on SCAP migration in the presence of LPS dentine.

METHODOLOGY

A total of 88 dentine slabs were used. TOF-SIMS analysis was performed amongst the LPS-treated and untreated dentine groups (n = 2/group). The study was conducted using four dentine groups: no treatment (control); LPS treatment only; LPS treatment followed by CSnp conditioning; and LPS treatment followed by Dex-CSnp conditioning groups. SCAP adherence, viability, differentiation and biomineralization potential on dentine from different groups were studied using fluorescent and scanning electron microscopy. Inflammation by macrophages in response to LPS dentine was quantified, and effect on SCAP migration was analysed. Statistical analysis was performed using Student's t-test with a significance level of P < 0.05.

RESULT

TOF-SIMS analysis confirmed LPS contamination. LPS dentine affected SCAP viability but not adherence to dentine (P < 0.001). Conditioning of LPS dentine with either nanoparticles improved SCAP viability (P < 0.01) and rescued other LPS related adverse effects on SCAPs, such as F-actin disruption, decrease in differentiation/biomineralization potential. IL-6 produced by macrophages in response to LPS-treated dentine impeded SCAP migration (P < 0.001), diminished on CSnp and Dex-CSnp conditioning groups (P < 0.01).

CONCLUSION

This study developed an LPS-dentine model and highlighted the ability of CSnp and Dex-CSnp to promote stem cell viability, migration, differentiation potential and reduce inflammation, providing an environment conducive for tissue regeneration/repair.