1
|
Hu J, Qian H, Han S, Zhang P, Lu Y. Light-Activated Virtual Sensor Array with Machine Learning for Non-Invasive Diagnosis of Coronary Heart Disease. NANO-MICRO LETTERS 2024; 16:274. [PMID: 39147964 PMCID: PMC11327237 DOI: 10.1007/s40820-024-01481-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/11/2024] [Accepted: 07/06/2024] [Indexed: 08/17/2024]
Abstract
Early non-invasive diagnosis of coronary heart disease (CHD) is critical. However, it is challenging to achieve accurate CHD diagnosis via detecting breath. In this work, heterostructured complexes of black phosphorus (BP) and two-dimensional carbide and nitride (MXene) with high gas sensitivity and photo responsiveness were formulated using a self-assembly strategy. A light-activated virtual sensor array (LAVSA) based on BP/Ti3C2Tx was prepared under photomodulation and further assembled into an instant gas sensing platform (IGSP). In addition, a machine learning (ML) algorithm was introduced to help the IGSP detect and recognize the signals of breath samples to diagnose CHD. Due to the synergistic effect of BP and Ti3C2Tx as well as photo excitation, the synthesized heterostructured complexes exhibited higher performance than pristine Ti3C2Tx, with a response value 26% higher than that of pristine Ti3C2Tx. In addition, with the help of a pattern recognition algorithm, LAVSA successfully detected and identified 15 odor molecules affiliated with alcohols, ketones, aldehydes, esters, and acids. Meanwhile, with the assistance of ML, the IGSP achieved 69.2% accuracy in detecting the breath odor of 45 volunteers from healthy people and CHD patients. In conclusion, an immediate, low-cost, and accurate prototype was designed and fabricated for the noninvasive diagnosis of CHD, which provided a generalized solution for diagnosing other diseases and other more complex application scenarios.
Collapse
Affiliation(s)
- Jiawang Hu
- Department of Chemical Engineering, Tsinghua University, Beijing, 100084, People's Republic of China
- Key Laboratory of Industrial Biocatalysis, Ministry of Education, Tsinghua University, Beijing, 100084, People's Republic of China
| | - Hao Qian
- Department of Cardiology, Xuanwu Hospital, Capital Medical University, Beijing, 100053, People's Republic of China
- Department of Cardiology, Beijing Tsinghua Changgung Hospital, School of Clinical Medicine, Tsinghua University, Beijing, 102218, People's Republic of China
| | - Sanyang Han
- Institute of Biopharmaceutical and Health Engineering, Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, People's Republic of China
| | - Ping Zhang
- Department of Cardiology, Beijing Tsinghua Changgung Hospital, School of Clinical Medicine, Tsinghua University, Beijing, 102218, People's Republic of China.
| | - Yuan Lu
- Department of Chemical Engineering, Tsinghua University, Beijing, 100084, People's Republic of China.
- Key Laboratory of Industrial Biocatalysis, Ministry of Education, Tsinghua University, Beijing, 100084, People's Republic of China.
| |
Collapse
|
2
|
Vázquez-López A, Maestre D, Cremades A. Thermoelectric Performance of Hybrid Inorganic/Organic Composites Based on PEDOT:PSS/Tin(II) Oxide. Chemphyschem 2024; 25:e202300877. [PMID: 38642347 DOI: 10.1002/cphc.202300877] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2023] [Revised: 04/18/2024] [Accepted: 04/18/2024] [Indexed: 04/22/2024]
Abstract
PEDOT PSS(poly(3,4-ethylenedioxylthiophene):poly(styrenesulfonate))-based composites often exhibit remarkable characteristics regarding high electrical conductivity and great processability, being a suitable candidate for thermoelectric (TE) applications. To increase its performance, PEDOT:PSS is commonly blended with scarce and toxic inorganic compounds based on Se, Te or Bi. In this work we propose the use of one p-type metal oxide semiconductor (MOs): tin(II) oxide (SnO), motivated by its abundance and low toxicity. Hybrid PEDOT:PSS/SnO composites were obtained by firstly blending Ethylene glycol (EG) with PEDOT:PSS and then by adding p-type SnO, previously synthesized by a chemical route. The mixture was deposited via spin-coating onto glass substrates. The Power Factor (PF) of the composites increased by a factor of 300 with the combined EG/SnO composition.
Collapse
Affiliation(s)
- Antonio Vázquez-López
- Department of Materials Physics, Faculty of Physics, Complutense University of Madrid, 28040, Madrid, Spain
- Current affiliation: Materials Science and Engineering Area, Escuela Superior de Ciencias Experimentales y Tecnología, Universidad Rey Juan Carlos, C/Tulipán s/n, 28933, Madrid, Spain
| | - David Maestre
- Department of Materials Physics, Faculty of Physics, Complutense University of Madrid, 28040, Madrid, Spain
| | - Ana Cremades
- Department of Materials Physics, Faculty of Physics, Complutense University of Madrid, 28040, Madrid, Spain
| |
Collapse
|
3
|
Chan YJ, Dileep D, Rothstein SM, Cochran EW, Reuel NF. Single-Use, Metabolite Absorbing, Resonant Transducer (SMART) Culture Vessels for Label-Free, Continuous Cell Culture Progression Monitoring. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024:e2401260. [PMID: 38900081 DOI: 10.1002/advs.202401260] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/03/2024] [Revised: 05/16/2024] [Indexed: 06/21/2024]
Abstract
Secreted metabolites are an important class of bio-process analytical technology (PAT) targets that can correlate to cell conditions. However, current strategies for measuring metabolites are limited to discrete measurements, resulting in limited understanding and ability for feedback control strategies. Herein, a continuous metabolite monitoring strategy is demonstrated using a single-use metabolite absorbing resonant transducer (SMART) to correlate with cell growth. Polyacrylate is shown to absorb secreted metabolites from living cells containing hydroxyl and alkenyl groups such as terpenoids, that act as a plasticizer. Upon softening, the polyacrylate irreversibly conformed into engineered voids above a resonant sensor, changing the local permittivity which is interrogated, contact-free, with a vector network analyzer. Compared to sensing using the intrinsic permittivity of cells, the SMART approach yields a 20-fold improvement in sensitivity. Tracking growth of many cell types such as Chinese hamster ovary, HEK293, K562, HeLa, and E. coli cells as well as perturbations in cell proliferation during drug screening assays are demonstrated. The sensor is benchmarked to show continuous measurement over six days, ability to track different growth conditions, selectivity to transducing active cell growth metabolites against other components found in the media, and feasibility to scale out for high throughput campaigns.
Collapse
Affiliation(s)
- Yee Jher Chan
- Chemical and Biological Engineering, Iowa State University, Ames, IA, 50011, USA
| | - Dhananjay Dileep
- Chemical and Biological Engineering, Iowa State University, Ames, IA, 50011, USA
| | | | - Eric W Cochran
- Chemical and Biological Engineering, Iowa State University, Ames, IA, 50011, USA
| | - Nigel F Reuel
- Chemical and Biological Engineering, Iowa State University, Ames, IA, 50011, USA
- Skroot Laboratory Inc, Ames, IA, 50010, USA
| |
Collapse
|
4
|
Korotcenkov G. II-VI Semiconductor-Based Conductometric Gas Sensors: Is There a Future for These Sensors? SENSORS (BASEL, SWITZERLAND) 2024; 24:3861. [PMID: 38931646 PMCID: PMC11207366 DOI: 10.3390/s24123861] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/30/2024] [Revised: 06/03/2024] [Accepted: 06/12/2024] [Indexed: 06/28/2024]
Abstract
A review of the state of research in the development of conductometric gas sensors based on II-VI semiconductors is given. It was shown that II-VI compounds indeed have properties that are necessary for the development of highly efficient gas sensors. In this case, to achieve the required parameters, all approaches developed for metal oxides can be used. At the same time, during a detailed review, it was concluded that sensors based on II-VI compounds have no prospects for appearing on the gas sensor market. The main obstacle is the instability of the surface state, which leads to poor reproducibility of parameters and drift of sensor characteristics during operation.
Collapse
Affiliation(s)
- Ghenadii Korotcenkov
- Department of Physics and Engineering, Moldova State University, Str. Mateevici 60, MD-2009 Chisinau, Moldova
| |
Collapse
|
5
|
Humayun M, Bououdina M, Usman M, Khan A, Luo W, Wang C. Designing State-of-the-Art Gas Sensors: From Fundamentals to Applications. CHEM REC 2024; 24:e202300350. [PMID: 38355899 DOI: 10.1002/tcr.202300350] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/18/2023] [Revised: 12/23/2023] [Indexed: 02/16/2024]
Abstract
Gas sensors are crucial in environmental monitoring, industrial safety, and medical diagnostics. Due to the rising demand for precise and reliable gas detection, there is a rising demand for cutting-edge gas sensors that possess exceptional sensitivity, selectivity, and stability. Due to their tunable electrical properties, high-density surface-active sites, and significant surface-to-volume ratio, nanomaterials have been extensively investigated in this regard. The traditional gas sensors utilize homogeneous material for sensing where the adsorbed surface oxygen species play a vital role in their sensing activity. However, their performance for selective gas sensing is still unsatisfactory because the employed high temperature leads to the poor stability. The heterostructures nanomaterials can easily tune sensing performance and their different energy band structures, work functions, charge carrier concentration and polarity, and interfacial band alignments can be precisely designed for high-performance selective gas sensing at low temperature. In this review article, we discuss in detail the fundamentals of semiconductor gas sensing along with their mechanisms. Further, we highlight the existed challenges in semiconductor gas sensing. In addition, we review the recent advancements in semiconductor gas sensor design for applications from different perspective. Finally, the conclusion and future perspectives for improvement of the gas sensing performance are discussed.
Collapse
Affiliation(s)
- Muhammad Humayun
- School of Integrated Circuits, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, People's Republic of China
- Energy, Water and Environment Lab, College of Humanities and Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia
| | - Mohamed Bououdina
- Energy, Water and Environment Lab, College of Humanities and Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia
| | - Muhammad Usman
- Interdisciplinary Research Center for Hydrogen and Energy Storage (IRC-HES), King Fahd University of Petroleum & Minerals (KFUPM), Dhahran, 31261, Saudi Arabia
| | - Abbas Khan
- Energy, Water and Environment Lab, College of Humanities and Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia
- Department of Chemistry, Abdul Wali Khan University, Mardan, 23200, Pakistan
| | - Wei Luo
- School of Integrated Circuits, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, People's Republic of China
| | - Chundong Wang
- School of Integrated Circuits, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, People's Republic of China
- Energy, Water and Environment Lab, College of Humanities and Sciences, Prince Sultan University, Riyadh, 11586, Saudi Arabia
| |
Collapse
|
6
|
Enea N, Ion V, Viespe C, Constantinoiu I, Bonciu A, Stîngescu ML, Bîrjega R, Scarisoreanu ND. Lead-Free Perovskite Thin Films for Gas Sensing through Surface Acoustic Wave Device Detection. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 14:39. [PMID: 38202494 PMCID: PMC10780711 DOI: 10.3390/nano14010039] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/29/2023] [Revised: 12/18/2023] [Accepted: 12/20/2023] [Indexed: 01/12/2024]
Abstract
Thin film technology shows great promise in fabricating electronic devices such as gas sensors. Here, we report the fabrication of surface acoustic wave (SAW) sensors based on thin films of (1 - x) Ba(Ti0.8Zr0.2)O3-x(Ba0.7Ca0.3)TiO3 (BCTZ50, x = 50) and Polyethylenimine (PEI). The layers were deposited by two laser-based techniques, namely pulsed laser deposition (PLD) for the lead-free material and matrix assisted pulsed laser evaporation (MAPLE) for the sensitive polymer. In order to assay the impact of the thickness, the number of laser pulses was varied, leading to thicknesses between 50 and 350 nm. The influence of BCTZ film's crystallographic features on the characteristics and performance of the SAW device was studied by employing substrates with different crystal structures, more precisely cubic Strontium Titanate (SrTiO3) and orthorhombic Gadolinium Scandium Oxide (GdScO3). The SAW sensors were further integrated into a testing system to evaluate the response of the BCTZ thin films with PEI, and then subjected to tests for N2, CO2 and O2 gases. The influence of the MAPLE's deposited PEI layer on the overall performance was demonstrated. For the SAW sensors based on BCTZ/GdScO3 thin films with a PEI polymer, a maximum frequency shift of 39.5 kHz has been obtained for CO2; eight times higher compared to the sensor without the polymeric layer.
Collapse
Affiliation(s)
- Nicoleta Enea
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
- Department of Physics and Astronomy, University of Florence, Via G. Sansone 1, 50019 Sesto Fiorentino, FI, Italy
- Faculty of Physics, University of Bucharest, 077125 Magurele, Romania
| | - Valentin Ion
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
| | - Cristian Viespe
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
| | - Izabela Constantinoiu
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
| | - Anca Bonciu
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
| | - Maria Luiza Stîngescu
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
- Faculty of Physics, University of Bucharest, 077125 Magurele, Romania
| | - Ruxandra Bîrjega
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
| | - Nicu Doinel Scarisoreanu
- National Institute for Laser, Plasma and Radiation Physics, 077125 Magurele, Romania or (N.E.); (C.V.); (I.C.); (A.B.); (M.L.S.); (R.B.); (N.D.S.)
| |
Collapse
|
7
|
Zhao Z, Chen W, Li Q, Xiong B, Ning Y, Yang P. Interfacial Supra-Assembly of Copolymer Nanoparticles Enables the Formation of Nanocomposite Crystals with a Tunable Internal Structure. J Am Chem Soc 2023; 145:21546-21553. [PMID: 37748127 DOI: 10.1021/jacs.3c07435] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/27/2023]
Abstract
It is highly desirable but technically challenging to precisely control the spatial composition and internal structure of crystalline nanocomposite materials, especially in a one-pot synthetic route. Herein, we demonstrate a versatile pathway to tune the spatial distribution of guest species within a host inorganic crystal via an incorporation strategy. Specifically, well-defined block copolymer nanoparticles, poly(methacrylic acid)x-block-poly(styrene-alt-N-phenylmaleimide)y [PMAAx-P(St-alt-NMI)y], are synthesized by polymerization-induced self-assembly. Such anionic nanoparticles can supra-assemble onto the surface of larger cationic nanoparticles via an electrostatic interaction, forming colloidal nanocomposite particles (CNPs). Remarkably, such CNPs can be incorporated into calcite single crystals in a spatially controlled manner: the depth of CNPs incorporation into calcite is tunable. Systematic investigation indicates that this interesting phenomenon is governed by the colloidal stability of CNPs, which in turn is dictated by the PMAAx-P(St-alt-NMI)y adsorption density and calcium ion concentration. This study opens up a general and efficient route for the preparation of a wide range of crystalline nanocomposite materials with a controlled internal composition and structure.
Collapse
Affiliation(s)
- Zhenghong Zhao
- College of Chemistry and Materials Science, Guangdong Provincial Key Laboratory of Functional Supramolecular Coordination Materials and Applications, Jinan University, Guangzhou 510632, China
| | - Wenting Chen
- College of Chemistry and Materials Science, Guangdong Provincial Key Laboratory of Functional Supramolecular Coordination Materials and Applications, Jinan University, Guangzhou 510632, China
| | - Qin Li
- College of Chemistry and Materials Science, Guangdong Provincial Key Laboratory of Functional Supramolecular Coordination Materials and Applications, Jinan University, Guangzhou 510632, China
| | - Biao Xiong
- College of Chemistry and Materials Science, Guangdong Provincial Key Laboratory of Functional Supramolecular Coordination Materials and Applications, Jinan University, Guangzhou 510632, China
| | - Yin Ning
- College of Chemistry and Materials Science, Guangdong Provincial Key Laboratory of Functional Supramolecular Coordination Materials and Applications, Jinan University, Guangzhou 510632, China
| | - Peihui Yang
- College of Chemistry and Materials Science, Jinan University, Guangzhou 510632, China
| |
Collapse
|
8
|
Nie E, He P, Peng W, Zhang H, Lü F. Microbial volatile organic compounds as novel indicators of anaerobic digestion instability: Potential and challenges. Biotechnol Adv 2023; 67:108204. [PMID: 37356597 DOI: 10.1016/j.biotechadv.2023.108204] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/04/2023] [Revised: 06/07/2023] [Accepted: 06/19/2023] [Indexed: 06/27/2023]
Abstract
The wide application of anaerobic digestion (AD) technology is limited by process fluctuations. Thus, process monitoring based on screening state parameters as early warning indicators (EWI) is a top priority for AD facilities. However, predicting anaerobic digester stability based on such indicators is difficult, and their threshold values are uncertain, case-specific, and sometimes produce conflicting results. Thus, new EWI should be proposed to integrate microbial and metabolic information. These microbial volatile organic compounds (mVOCs) including alkanes, alkenes, alkynes, aromatic compounds are produced by microorganisms (bacteria, archaea and fungi), which might serve as a promising diagnostic tool for environmental monitoring. Moreover, mVOCs diffuse in both gas and liquid phases and are considered the language of intra kingdom microbial interactions. Herein, we highlight the potential of mVOCs as EWI for AD process instability, including discussions regarding characteristics and sources of mVOCs as well as sampling and determination methods. Furthermore, existing challenges must be addressed, before mVOCs profiling can be used as an early warning system for diagnosing AD process instability, such as mVOCs sampling, analysis and identification. Finally, we discuss the potential biotechnology applications of mVOCs and approaches to overcome the challenges regarding their application.
Collapse
Affiliation(s)
- Erqi Nie
- Institute of Waste Treatment and Reclamation, Tongji University, Shanghai 200092, People's Republic of China
| | - Pinjing He
- Institute of Waste Treatment and Reclamation, Tongji University, Shanghai 200092, People's Republic of China; Shanghai Institute of Pollution Control and Ecological Security, Shanghai 200092, People's Republic of China
| | - Wei Peng
- Institute of Waste Treatment and Reclamation, Tongji University, Shanghai 200092, People's Republic of China
| | - Hua Zhang
- Institute of Waste Treatment and Reclamation, Tongji University, Shanghai 200092, People's Republic of China
| | - Fan Lü
- Institute of Waste Treatment and Reclamation, Tongji University, Shanghai 200092, People's Republic of China.
| |
Collapse
|
9
|
Highly sensitive Cu-ethylenediamine/PANI composite sensor for NH 3 detection at room temperature. Talanta 2023; 258:124418. [PMID: 36931059 DOI: 10.1016/j.talanta.2023.124418] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2022] [Revised: 02/27/2023] [Accepted: 03/03/2023] [Indexed: 03/07/2023]
Abstract
Ammonia detection is needed in several sectors including environmental monitoring, automobile industry, and in medical diagnosis. Conducting polymers, such as polyaniline (PANI), have been utilized to develop NH3 sensors operating at room temperature. However, the performance of these sensors in terms of sensitivity and selectivity need improvement. Functionalization of conducting PANI with metal nanocomposites have shown improved sensor performance. In this work, we report a highly sensitive copper-based nanocomposite for NH3 detection. The novelty lies in utilization of copper-ethylenediamine (Cu-en) nanocomposite functionalized over PANI for gas sensing. Resistance of the 20 wt% Cu-en with PANI increased 3.8 times upon exposure to 100 ppm of NH3. The nanocomposite sensor detected NH3 concentrations as low as 2 ppm. Further, the sensing mechanism was studied by in-situ IV characteristics and impedance spectroscopy during NH3 exposure. NH3 showed ionic interaction with PANI, and Cu2+. The strong affinity of Cu2+ for the lone pair of NH3 enhanced the sensor response from 0.78 to 3.8 for 100 ppm of NH3 at 20 °C. The sensor response was completely recovered after heating at 75 °C, which indicates reusability of the sensor. The sensor showed selectivity for NH3 over ethanol and H2S. The response was reasonably stable after bending the flexible sensor for 1000 times at a radius of 5 mm.
Collapse
|
10
|
Rehman A, Kumari R, Kamthan A, Tiwari R, Srivastava RK, van der Westhuizen FH, Mishra PK. Cell-free circulating mitochondrial DNA: An emerging biomarker for airborne particulate matter associated with cardiovascular diseases. Free Radic Biol Med 2023; 195:103-120. [PMID: 36584454 DOI: 10.1016/j.freeradbiomed.2022.12.083] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/25/2022] [Revised: 12/16/2022] [Accepted: 12/20/2022] [Indexed: 12/29/2022]
Abstract
The association of airborne particulate matter exposure with the deteriorating function of the cardiovascular system is fundamentally driven by the impairment of mitochondrial-nuclear crosstalk orchestrated by aberrant redox signaling. The loss of delicate balance in retrograde communication from mitochondria to the nucleus often culminates in the methylation of the newly synthesized strand of mitochondrial DNA (mtDNA) through DNA methyl transferases. In highly metabolic active tissues such as the heart, mtDNA's methylation state alteration impacts mitochondrial bioenergetics. It affects transcriptional regulatory processes involved in biogenesis, fission, and fusion, often accompanied by the integrated stress response. Previous studies have demonstrated a paradoxical role of mtDNA methylation in cardiovascular pathologies linked to air pollution. A pronounced alteration in mtDNA methylation contributes to systemic inflammation, an etiological determinant for several co-morbidities, including vascular endothelial dysfunction and myocardial injury. In the current article, we evaluate the state of evidence and examine the considerable promise of using cell-free circulating methylated mtDNA as a predictive biomarker to reduce the more significant burden of ambient air pollution on cardiovascular diseases.
Collapse
Affiliation(s)
- Afreen Rehman
- Department of Molecular Biology, ICMR-National Institute for Research in Environmental Health, Bhopal, India.
| | - Roshani Kumari
- Department of Molecular Biology, ICMR-National Institute for Research in Environmental Health, Bhopal, India.
| | - Arunika Kamthan
- Department of Molecular Biology, ICMR-National Institute for Research in Environmental Health, Bhopal, India.
| | - Rajnarayan Tiwari
- Department of Molecular Biology, ICMR-National Institute for Research in Environmental Health, Bhopal, India.
| | | | | | - Pradyumna Kumar Mishra
- Department of Molecular Biology, ICMR-National Institute for Research in Environmental Health, Bhopal, India.
| |
Collapse
|
11
|
Su PG, Tsai MS, Lu CJ. Fabrication of noble metal (Au, Ag, Pt)/polythiophene/reduced graphene oxide ternary nanocomposites for NH 3 gas sensing at room temperature. ANALYTICAL METHODS : ADVANCING METHODS AND APPLICATIONS 2022; 14:4113-4121. [PMID: 36214083 DOI: 10.1039/d2ay01317g] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Room temperature NH3 gas sensors composed of noble metal (Au, Ag or Pt)/polythiophene/reduced graphene oxide (Au, Ag or Pt/PTh/rGO) ternary nanocomposite films were fabricated using a simple one-pot redox reaction. The surface morphology and composition of Au, Ag or Pt/PTh/rGO ternary nanocomposite films were analyzed using Fourier transform infrared spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compared with Ag/PTh/rGO and Pt/PTh/rGO ternary nanocomposite films, obviously bright Au nanoparticles were observed on the surface of the massive lamination PTh film which wrapped the rGO, and encapsulated Au nanoparticles were observed in the Au/PTh/rGO film. Comparative gas sensing results showed that the Au/PTh/rGO ternary nanocomposite film had the highest response compared with Ag/PTh/rGO and Pt/PTh/rGO ternary nanocomposite films at room temperature, especially when the testing concentration of NH3 gas was below 5 ppm. The Au/PTh/rGO ternary nanocomposite film also had a fast response time and good reproducibility. The combination of the high catalytic activity of naked Au nanoparticles and the formation of effective carrier transfer channels by encapsulated Au nanoparticles was responsible for the improved response of the Au/PTh/rGO ternary nanocomposite film.
Collapse
Affiliation(s)
- Pi-Guey Su
- Department of Chemistry, Chinese Culture University, Taipei 111, Taiwan.
| | - Meng-Shian Tsai
- Department of Chemistry, National Taiwan Normal University, Taipei 116, Taiwan
| | - Chia-Jung Lu
- Department of Chemistry, National Taiwan Normal University, Taipei 116, Taiwan
| |
Collapse
|
12
|
Ou LX, Liu MY, Zhu LY, Zhang DW, Lu HL. Recent Progress on Flexible Room-Temperature Gas Sensors Based on Metal Oxide Semiconductor. NANO-MICRO LETTERS 2022; 14:206. [PMID: 36271065 PMCID: PMC9587164 DOI: 10.1007/s40820-022-00956-9] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/12/2022] [Accepted: 09/12/2022] [Indexed: 05/05/2023]
Abstract
With the rapid development of the Internet of Things, there is a great demand for portable gas sensors. Metal oxide semiconductors (MOS) are one of the most traditional and well-studied gas sensing materials and have been widely used to prepare various commercial gas sensors. However, it is limited by high operating temperature. The current research works are directed towards fabricating high-performance flexible room-temperature (FRT) gas sensors, which are effective in simplifying the structure of MOS-based sensors, reducing power consumption, and expanding the application of portable devices. This article presents the recent research progress of MOS-based FRT gas sensors in terms of sensing mechanism, performance, flexibility characteristics, and applications. This review comprehensively summarizes and discusses five types of MOS-based FRT gas sensors, including pristine MOS, noble metal nanoparticles modified MOS, organic polymers modified MOS, carbon-based materials (carbon nanotubes and graphene derivatives) modified MOS, and two-dimensional transition metal dichalcogenides materials modified MOS. The effect of light-illuminated to improve gas sensing performance is further discussed. Furthermore, the applications and future perspectives of FRT gas sensors are also discussed.
Collapse
Affiliation(s)
- Lang-Xi Ou
- State Key Laboratory of ASIC and System, Shanghai Institute of Intelligent Electronics &Systems, School of Microelectronics, Fudan University, Shanghai, 200433, People's Republic of China
| | - Meng-Yang Liu
- State Key Laboratory of ASIC and System, Shanghai Institute of Intelligent Electronics &Systems, School of Microelectronics, Fudan University, Shanghai, 200433, People's Republic of China
| | - Li-Yuan Zhu
- State Key Laboratory of ASIC and System, Shanghai Institute of Intelligent Electronics &Systems, School of Microelectronics, Fudan University, Shanghai, 200433, People's Republic of China
| | - David Wei Zhang
- State Key Laboratory of ASIC and System, Shanghai Institute of Intelligent Electronics &Systems, School of Microelectronics, Fudan University, Shanghai, 200433, People's Republic of China
| | - Hong-Liang Lu
- State Key Laboratory of ASIC and System, Shanghai Institute of Intelligent Electronics &Systems, School of Microelectronics, Fudan University, Shanghai, 200433, People's Republic of China.
- Yiwu Research Institute of Fudan University, Chengbei Road, Yiwu City, 322000, Zhejiang, People's Republic of China.
| |
Collapse
|
13
|
Suntijitrungruang O, Lakronwat J, Uthailiang T, Pongkitiwanichakul P, Boonchui S. Simulation of the sensing mechanism in quantum dot gas sensor by quantum light harvesting approach. Front Chem 2022; 10:1036197. [PMID: 36324518 PMCID: PMC9618855 DOI: 10.3389/fchem.2022.1036197] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/04/2022] [Accepted: 09/28/2022] [Indexed: 11/26/2022] Open
Abstract
Quantum dot (QD) gas sensors are one of the most useful nanotechnologies applied to protect people from unnecessary harm. This work theoretically explores the mechanism in QD gas sensors in order to advance the prudent design of relevant products. The theoretical model employed in this research is similar to the process in plants’ photosynthesis, referred to as charge separation of light harvesting. In this work, we investigate the details of energy transport in QD gas sensors carried by electrons from the circuit. We demonstrate theoretically how the effects of temperature and gas detection affect electron transport. To analyze thoroughly, the potential energy referred to as the Schotthy barrier perturbed by gasses is considered. Moreover, the energy transfer efficiency (ETE) of QD gas sensors for oxidizing or reducing gas is shown in the simulation. The results imply that the electron transport between QDs (raising the current and lessening the current) depends on a parameter corresponding with the Schotthy barrier. In regard to thermal energy portrayed by phonon baths, a higher temperature shortens the time duration of energy transport in QDs, hence raising energy transfer efficiency and energy current. Our model can be applied to further QD gas sensors’ design and manufacture.
Collapse
Affiliation(s)
| | - Jidapa Lakronwat
- Department of Physics, Faculty of Science, Kasetsart University, Bangkok, Thailand
| | - Teerapat Uthailiang
- Department of Physics, Faculty of Science, Kasetsart University, Bangkok, Thailand
| | | | - S. Boonchui
- Department of Physics, Faculty of Science, Kasetsart University, Bangkok, Thailand
- Center of Rubber and Polymer Materials in Agriculture and Industry (RPM), Faculty of Science, Kasetsart University, Bangkok, Thailand
- *Correspondence: S. Boonchui,
| |
Collapse
|
14
|
Room-Temperature ppb-Level H2S Gas Sensors Based on Ag Nanowire/Hollow PPy Nanotube Nanocomposites. CHEMOSENSORS 2022. [DOI: 10.3390/chemosensors10080305] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
H2S gas sensors were fabricated using Ag nanowire/hollow polypyrrole nanotube nanocomposite (Ag NW/hollow PPy NT) film for sensing ppb-level H2S gas at room temperature. The morphology, phase composition and crystalline structure of Ag NW/hollow PPy NT nanocomposites were analyzed via scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD) and Fourier-transform infrared spectroscopy (FTIR). TEM and SEM images revealed that Ag NWs were well dispersed in the hollow PPy NT matrix. IR results showed no interaction between Ag NWs and hollow PPy NTs in the Ag NW/hollow PPy NT nanocomposites. The effect of the amount of added Ag NWs on the response of the Ag NW/hollow PPy NT nanocomposites to the ppb-level H2S gas was investigated. Comparative gas-sensing results revealed that the introduction of Ag NWs onto hollow PPy NTs was effective in promoting the sensor response to H2S gas. More importantly, the Ag NW/hollow PPy NT nanocomposite had a strong response to ppb-level H2S gas at room temperature.
Collapse
|
15
|
Wen SP, Trinh E, Yue Q, Fielding LA. Physical Adsorption of Graphene Oxide onto Polymer Latexes and Characterization of the Resulting Nanocomposite Particles. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2022; 38:8187-8199. [PMID: 35771239 PMCID: PMC9281389 DOI: 10.1021/acs.langmuir.2c00327] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Polymer/graphene oxide (GO) nanocomposite particles were prepared via heteroflocculation between 140-220 nm cationic latex nanoparticles and anionic GO nanosheets in either acidic or basic conditions. It is demonstrated that nanocomposite particles can be formed using either poly(2-vinylpyridine)-b-poly(benzyl methacrylate) (P2VP-PBzMA) block copolymer nanoparticles prepared by reversible-addition chain-transfer (RAFT)-mediated polymerization-induced self-assembly (PISA), or poly(ethylene glycol)methacrylate (PEGMA)-stabilized P2VP latexes prepared by traditional emulsion polymerization. These two latexes are different morphologically as the P2VP-PBzMA block copolymer latexes have P2VP steric stabilizer chains in their corona, whereas the PEGMA-stabilized P2VP particles have a P2VP core and a nonionic steric stabilizer. Nevertheless, both the P2VP-PBzMA and PEGMA-stabilized P2VP latexes are cationic at low pH. Thus, the addition of GO to these latexes causes flocculation to occur immediately due to the opposite charges between the anionic GO nanosheets and cationic latexes. Control heteroflocculation experiments were conducted using anionic sterically stabilized poly(potassium 3-sulfopropyl methacrylate)-b-poly(benzyl methacrylate) (PKSPMA-PBzMA) and nonionic poly(benzyl methacrylate) (PBzMA) nanoparticles to demonstrate that polymer/GO nanocomposite particles were not formed. The degree of flocculation and the strength of electrostatic interaction between the cationic polymer latexes and GO were assessed using disc centrifuge photosedimentometry (DCP), transmission electron microscopy (TEM), and UV-visible spectrophotometry. These studies suggest that the optimal conditions for the formation of polymer/GO nanocomposite particles were GO contents between 10% and 20% w/w relative to latex, with the latexes containing P2VP in their corona having a stronger electrostatic attraction to the GO sheets.
Collapse
Affiliation(s)
- Shang-Pin Wen
- Department
of Materials, School of Natural Sciences, University of Manchester, Oxford Road, Manchester M13 9PL, U.K.
| | - Elisabeth Trinh
- Department
of Materials, School of Natural Sciences, University of Manchester, Oxford Road, Manchester M13 9PL, U.K.
| | - Qi Yue
- Department
of Materials, School of Natural Sciences, University of Manchester, Oxford Road, Manchester M13 9PL, U.K.
| | - Lee A. Fielding
- Department
of Materials, School of Natural Sciences, University of Manchester, Oxford Road, Manchester M13 9PL, U.K.
- Henry
Royce Institute, The University of Manchester, Oxford Road, Manchester M13 9PL, U.K.
| |
Collapse
|
16
|
Liu X, Zheng W, Kumar R, Kumar M, Zhang J. Conducting polymer-based nanostructures for gas sensors. Coord Chem Rev 2022. [DOI: 10.1016/j.ccr.2022.214517] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
17
|
High-Performance Room-Temperature Conductometric Gas Sensors: Materials and Strategies. CHEMOSENSORS 2022. [DOI: 10.3390/chemosensors10060227] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
Chemiresistive sensors have gained increasing interest in recent years due to the necessity of low-cost, effective, high-performance gas sensors to detect volatile organic compounds (VOC) and other harmful pollutants. While most of the gas sensing technologies rely on the use of high operation temperatures, which increase usage cost and decrease efficiency due to high power consumption, a particular subset of gas sensors can operate at room temperature (RT). Current approaches are aimed at the development of high-sensitivity and multiple-selectivity room-temperature sensors, where substantial research efforts have been conducted. However, fewer studies presents the specific mechanism of action on why those particular materials can work at room temperature and how to both enhance and optimize their RT performance. Herein, we present strategies to achieve RT gas sensing for various materials, such as metals and metal oxides (MOs), as well as some of the most promising candidates, such as polymers and hybrid composites. Finally, the future promising outlook on this technology is discussed.
Collapse
|
18
|
Shinde RB, Padalkar NS, Sadavar SV, Kale SB, Magdum VV, Chitare YM, Kulkarni SP, Patil UM, Parale VG, Park HH, Gunjakar JL. 2D-2D lattice engineering route for intimately coupled nanohybrids of layered double hydroxide and potassium hexaniobate: Chemiresistive SO 2 sensor. JOURNAL OF HAZARDOUS MATERIALS 2022; 432:128734. [PMID: 35334269 DOI: 10.1016/j.jhazmat.2022.128734] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/27/2021] [Revised: 03/05/2022] [Accepted: 03/15/2022] [Indexed: 06/14/2023]
Abstract
2D-2D lattice engineering route is used to synthesize intimately coupled nanohybrids of layered double hydroxide (LDH) and potassium hexaniobate. The 2D-2D lattice engineering route is based on the electrostatically derived self-assembly of delaminated zinc-chromium-layered double hydroxide (ZC-LDH) nanosheets and potassium hexaniobate (HNb) nanosheets (ZCNb nanohybrids). The 2D-2D lattice-engineered ZCNb nanohybrids display expanded surface area, mesoporous anchored nanosheets network morphology, and intimate coupling between nanosheets. The 2D-2D lattice engineered ZCNb nanohybrids are used for the low temperature operated gas sensor. The ZCNb nanohybrids display outstanding selectivity for the SO2, with the high response of 61.5% compared to pristine ZC-LDH (28.08%) and potassium niobate (8%) at 150 °C. Moreover, ZCNb sensors demonstrate superior response and recovery periods of 6 and 167 s at 150 °C, respectively. This result underscores the exceptional functionality of the ZCNb nanohybrids as efficient SO2 sensors. Moreover, these findings vividly demonstrate that the 2D-2D lattice-engineered ZCNb nanohybrids are quite effective not only in improving the gas sensor activity but also in developing of new type of intimately coupled mesoporous LDH-metal-oxide based hybrid materials.
Collapse
Affiliation(s)
- Rohini B Shinde
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Navnath S Padalkar
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Shrikant V Sadavar
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Shital B Kale
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Vikas V Magdum
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Yogesh M Chitare
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Shirin P Kulkarni
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Umakant M Patil
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India
| | - Vinayak G Parale
- Department of Materials Science and Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, South Korea
| | - Hyung-Ho Park
- Department of Materials Science and Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, South Korea
| | - Jayavant L Gunjakar
- Centre for Interdisciplinary Research, D. Y. Patil Education Society (Institution Deemed to be University), Kolhapur 416 006, Maharastra, India.
| |
Collapse
|
19
|
Abstract
Healthcare is undergoing large transformations, and it is imperative to leverage new technologies to support the advent of personalized medicine and disease prevention. It is now well accepted that the levels of certain biological molecules found in blood and other bodily fluids, as well as in exhaled breath, are an indication of the onset of many human diseases and reflect the health status of the person. Blood, urine, sweat, or saliva biomarkers can therefore serve in early diagnosis of diseases such as cancer, but also in monitoring disease progression, detecting metabolic disfunctions, and predicting response to a given therapy. For most point-of-care sensors, the requirement that patients themselves can use and apply them is crucial not only regarding the diagnostic part, but also at the sample collection level. This has stimulated the development of such diagnostic approaches for the non-invasive analysis of disease-relevant analytes. Considering these timely efforts, this review article focuses on novel, sensitive, and selective sensing systems for the detection of different endogenous target biomarkers in bodily fluids as well as in exhaled breath, which are associated with human diseases.
Collapse
|
20
|
Abstract
Conductive polymers have attracted wide attention since their discovery due to their unique properties such as good electrical conductivity, thermal and chemical stability, and low cost. With different possibilities of preparation and deposition on surfaces, they present unique and tunable structures. Because of the ease of incorporating different elements to form composite materials, conductive polymers have been widely used in a plethora of applications. Their inherent mechanical tolerance limit makes them ideal for flexible devices, such as electrodes for batteries, artificial muscles, organic electronics, and sensors. As the demand for the next generation of (wearable) personal and flexible sensing devices is increasing, this review aims to discuss and summarize the recent manufacturing advances made on flexible electrochemical sensors.
Collapse
|
21
|
Kaur P, Bagchi S, Gribble D, Pol VG, Bhondekar AP. Impedimetric Chemosensing of Volatile Organic Compounds Released from Li-Ion Batteries. ACS Sens 2022; 7:674-683. [PMID: 35170958 DOI: 10.1021/acssensors.2c00113] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Detection of toxic and flammable gases and volatile organic compounds (VOCs) released from Li-ion batteries during thermal runaway can generate an early warning. A submicron (∼0.15 μm)-thick poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) sensor film is coated on a platinum electrode through a facile aqueous dispersion. The resulting sensor reliably detected different volatile organic compounds (VOCs) released during the early stages of thermal runaway of lithium-ion batteries (LIBs) even at low concentrations. The single-electrode sensor utilizes impedance spectroscopy to measure ethyl methyl carbonate and methyl formate concentrations at 5, 15, and 30 ppm independently and in various combinations using ethanol as a reference. In contrast to DC resistance measurement, which provides a single parameter, impedance spectroscopy provides a wealth of information, including impedance and phase angle at multiple frequencies as well as fitted charge transfer resistance and constant-phase elements. Different analytes influence the measurement of different parameters to varying degrees, enabling distinction using a single sensing material. The response time for ethyl methyl carbonate was measured to be 6 s. Three principal components (PCs) preserve more than 95% of information and efficiently enable discrimination of different classes of analytes. Application of low-power PEDOT:PSS-based gas sensors will facilitate cost-effective early detection of VOCs and provide early warning to battery management systems (BMS), potentially mitigating catastrophic thermal runaway events.
Collapse
Affiliation(s)
- Palwinder Kaur
- Davidson School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907, United States
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
- CSIR-Central Scientific Instruments Organization, Sector 30-C, Chandigarh 160030, India
| | - Sudeshna Bagchi
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
- CSIR-Central Scientific Instruments Organization, Sector 30-C, Chandigarh 160030, India
| | - Daniel Gribble
- Davidson School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907, United States
| | - Vilas G. Pol
- Davidson School of Chemical Engineering, Purdue University, West Lafayette, Indiana 47907, United States
| | - Amol P. Bhondekar
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad 201002, India
- CSIR-Central Scientific Instruments Organization, Sector 30-C, Chandigarh 160030, India
| |
Collapse
|
22
|
Abstract
The technological developments of recent times have allowed the use of innovative approaches to support the diagnosis of various diseases. Many of such clinical conditions are often associated with metabolic unbalance, in turn producing an alteration of the gut microbiota even during asymptomatic stages. As such, studies regarding the microbiota composition in biological fluids obtained by humans are continuously growing, and the methodologies for their investigation are rapidly changing, making it less invasive and more affordable. To this extent, Electronic Nose and Electronic Tongue tools are gaining importance in the relevant field, making them a useful alternative—or support—to traditional analytical methods. In light of this, the present manuscript seeks to investigate the development and use of such tools in the gut microbiota assessment according to the current literature. Significant gaps are still present, particularly concerning the Electronic Tongue systems, however the current evidence highlights the strong potential such tools own to enter the daily clinical practice, with significant advancement concerning the patients’ acceptability and cost saving for healthcare providers.
Collapse
|
23
|
Potentiality of polymer nanocomposites for sustainable environmental applications: A review of recent advances. POLYMER 2021. [DOI: 10.1016/j.polymer.2021.124184] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
24
|
Jadhav SA, Dhas SD, Patil KT, Moholkar AV, Patil PS. Polyaniline (PANI)-manganese dioxide (MnO2) nanocomposites as efficient electrode materials for supercapacitors. Chem Phys Lett 2021. [DOI: 10.1016/j.cplett.2021.138764] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
25
|
Wang J, Xu R, Wang C, Xiong J. Lamellar Polypyrene Based on Attapulgite-Sulfur Composite for Lithium-Sulfur Battery. MEMBRANES 2021; 11:483. [PMID: 34209570 PMCID: PMC8306344 DOI: 10.3390/membranes11070483] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/28/2021] [Revised: 06/19/2021] [Accepted: 06/24/2021] [Indexed: 11/17/2022]
Abstract
We report on the preparation and characterization of a novel lamellar polypyrrole using an attapulgite-sulfur composite as a hard template. Pretreated attapulgite was utilized as the carrier of elemental sulfur and the attapulgite-sulfur-polypyrrole (AT @400 °C-S-PPy) composite with 50 wt.% sulfur was obtained. The structure and morphology of the composite were characterized with infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). An AT @400 °C-S-PPy composite was further utilized as the cathode material for lithium-sulfur batteries. The first discharge specific capacity of this kind of battery reached 1175 mAh/g at a 0.1 C current rate and remained at 518 mAh/g after 100 cycles with capacity retention close to 44%. In the rate test, compared with the polypyrrole-sulfur (PPy-S) cathode material, the AT @400 °C-S-PPy cathode material showed lower capacity at a high current density, but it showed higher capacity when the current came back to a low current density, which was attributed to the "recycling" of pores and channels of attapulgite. Therefore, the lamellar composite with special pore structure has great value in improving the performance of lithium-sulfur batteries.
Collapse
Affiliation(s)
- Jing Wang
- Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China; (R.X.); (C.W.)
| | - Riwei Xu
- Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China; (R.X.); (C.W.)
| | - Chengzhong Wang
- Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China; (R.X.); (C.W.)
| | - Jinping Xiong
- Beijing Key Laboratory of Electrochemical Process and Technology for Materials, Beijing University of Chemical Technology, Beijing 100029, China; (R.X.); (C.W.)
- Fujian Provincial Key Laboratory of Ecological Industry Green Technology, Wuyi University, Wuyishan 354399, China
| |
Collapse
|
26
|
O'Driscoll DP, McMahon S, Garcia J, Biccai S, Gabbett C, Kelly AG, Barwich S, Moebius M, Boland CS, Coleman JN. Printable G-Putty for Frequency- and Rate-Independent, High-Performance Strain Sensors. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2006542. [PMID: 33856108 DOI: 10.1002/smll.202006542] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2020] [Revised: 03/18/2021] [Indexed: 06/12/2023]
Abstract
While nanocomposite electromechanical sensors are expected to display reasonable conductivity and high sensitivity, little consideration is given to eliminating hysteresis and strain rate/frequency dependence from their response. For example, while G-putty, a composite of graphene and polysiloxane, has very high electromechanical sensitivity, its extreme viscoelasticity renders it completely unsuitable for real sensors due to hysteretic and rate-/frequency-dependent effects. Here it is shown that G-putty can be converted to an ink and printed into patterned thin films on elastic substrates. A partial graphene-polymer phase segregation during printing increases the thin-film conductivity by ×106 compared to bulk, while the mechanical effects of the substrate largely suppress hysteresis and completely remove strain rate and frequency dependence. This allows the fabrication of practical, high-gauge-factor, wearable sensors for pulse measurements as well as patterned sensors for low-signal vibration sensing.
Collapse
Affiliation(s)
- Daniel P O'Driscoll
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Sean McMahon
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - James Garcia
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Sonia Biccai
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Cian Gabbett
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Adam G Kelly
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Sebastian Barwich
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Matthias Moebius
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| | - Conor S Boland
- Department of Physics, University of Sussex, Brighton, BN1 9RH, UK
| | - Jonathan N Coleman
- School of Physics, CRANN & AMBER Research Centres, Trinity College Dublin, Dublin 2, Ireland
| |
Collapse
|
27
|
Tomić M, Šetka M, Vojkůvka L, Vallejos S. VOCs Sensing by Metal Oxides, Conductive Polymers, and Carbon-Based Materials. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:552. [PMID: 33671783 PMCID: PMC7926866 DOI: 10.3390/nano11020552] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/23/2020] [Revised: 01/31/2021] [Accepted: 02/07/2021] [Indexed: 12/24/2022]
Abstract
This review summarizes the recent research efforts and developments in nanomaterials for sensing volatile organic compounds (VOCs). The discussion focuses on key materials such as metal oxides (e.g., ZnO, SnO2, TiO2 WO3), conductive polymers (e.g., polypyrrole, polythiophene, poly(3,4-ethylenedioxythiophene)), and carbon-based materials (e.g., graphene, graphene oxide, carbon nanotubes), and their mutual combination due to their representativeness in VOCs sensing. Moreover, it delves into the main characteristics and tuning of these materials to achieve enhanced functionality (sensitivity, selectivity, speed of response, and stability). The usual synthesis methods and their advantages towards their integration with microsystems for practical applications are also remarked on. The literature survey shows the most successful systems include structured morphologies, particularly hierarchical structures at the nanometric scale, with intentionally introduced tunable "decorative impurities" or well-defined interfaces forming bilayer structures. These groups of modified or functionalized structures, in which metal oxides are still the main protagonists either as host or guest elements, have proved improvements in VOCs sensing. The work also identifies the need to explore new hybrid material combinations, as well as the convenience of incorporating other transducing principles further than resistive that allow the exploitation of mixed output concepts (e.g., electric, optic, mechanic).
Collapse
Affiliation(s)
- Milena Tomić
- Institute of Microelectronics of Barcelona (IMB-CNM, CSIC), Campus UAB, 08193 Cerdanyola del Vallès, Barcelona, Spain;
- Department of Electronic Engineering, Autonomous University of Barcelona (UAB), Campus UAB, 08193 Cerdanyola del Vallès, Barcelona, Spain
| | - Milena Šetka
- CEITEC—Central European Institute of Technology, Brno University of Technology, 61200 Brno, Czech Republic;
| | - Lukaš Vojkůvka
- Silicon Austria Labs, Microsystem Technologies, High Tech Campus Villach, Europastraβe 12, A-9524 Villach, Austria;
| | - Stella Vallejos
- Institute of Microelectronics of Barcelona (IMB-CNM, CSIC), Campus UAB, 08193 Cerdanyola del Vallès, Barcelona, Spain;
- CEITEC—Central European Institute of Technology, Brno University of Technology, 61200 Brno, Czech Republic;
| |
Collapse
|