Roles of Polymer Ligands in Nanoparticle Stabilization

Enhancing Multifunctionality: Optimal Properties of Iron-Oxide-Reinforced Polyvinylidene Difluoride Unveiled Through Full Atom Molecular Dynamics Simulations

Nanocomposites made of magnetite (Fe3O4) nanoparticles (NP)s with different surface chemistry and polyvinyl difluoride (PVDF) polymer were investigated using full atom molecular dynamics (MD) simulation. NPs with hydroxyl (OH), hexanoic, and oleic acid terminations were considered in this study. The effect of each surface chemistry was investigated in terms of the mechanical properties, the distribution of the internal energy around the NP, and the chain polarization gradient from the interface to the bulk. From this investigation, we find that oleic acid termination, although the most popular, is less favorable for interfacial interaction and local polarization. The OH-terminated NP results in the best configuration for the properties investigated. The hexanoic acid-grafted NP presents a good compromise. Hydrogen bonding governs the induced response of the nanocomposites. Although the hexanoic acid grafted NP presents less hydrogen bonding than the OH-terminated case, the conformation of the hexanoic acid acts as a mobility flow inhibitor, leading to a performance comparable to that of the OH-terminated NP composite. This work led to investigating routes to make nanocomposite materials with optimized properties. These results shed light on the multiple combinations offered by nanocomposites that go beyond the conventional effects of size.

Control of Luminescence and Interfacial Properties as Perspective for Upconversion Nanoparticles

Near-infrared (NIR) light is highly suitable for studying biological systems due to its minimal scattering and lack of background fluorescence excitation, resulting in high signal-to-noise ratios. By combining NIR light with lanthanide-based upconversion nanoparticles (UCNPs), upconversion is used to generate UV or visible light within tissue. This remarkable property has gained significant research interest over the past two decades. Synthesis methods are developed to produce particles of various sizes, shapes, and complex core-shell architectures and new strategies are explored to optimize particle properties for specific bioapplications. The diverse photophysics of lanthanide ions offers extensive possibilities to tailor spectral characteristics by incorporating different ions and manipulating their arrangement within the nanocrystal. However, several challenges remain before UCNPs can be widely applied. Understanding the behavior of particle surfaces when exposed to complex biological environments is crucial. In applications where deep tissue penetration is required, such as photodynamic therapy and optogenetics, UCNPs show great potential as nanolamps. These nanoparticles can combine diagnostics and therapeutics in a minimally invasive, efficient manner, making them ideal upconversion probes. This article provides an overview of recent UCNP design trends, highlights past research achievements, and outlines potential future directions to bring upconversion research to the next level.

Surface ligand-assisted synthesis and biomedical applications of metal-organic framework nanocomposites

Metal-organic framework (MOF) nanocomposites have recently gained intensive attention for biosensing and disease therapy applications owing to their outstanding physiochemical properties. However, the direct growth of MOF nanocomposites is usually hindered by the mismatched lattice in the interface between the MOF and other nanocomponents. Surface ligands, molecules with surfactant-like properties, are demonstrated to exhibit the robust capability to modify the interfacial properties of nanomaterials and can be utilized as a powerful strategy for the synthesis of MOF nanocomposites. Besides this, surface ligands also exhibit significant functions in the morphological control and functionalization of MOF nanocomposites, thus greatly enhancing their performance in biomedical applications. In this review, the surface ligand-assisted synthesis and biomedical applications of MOF nanocomposites are comprehensively reviewed. Firstly, the synthesis of MOF nanocomposites is discussed according to the diverse roles of surface ligands. Then, MOF nanocomposites with different properties are listed with their applications in biosensing and disease therapy. Finally, current challenges and further directions of MOF nanocomposites are presented to motivate the development of MOF nanocomposites with elaborate structures, enriched functions, and excellent application prospects.

Two-Dimensional Polymer Networks Locking on Inorganic Nanoparticles

Two-dimensional polymers (2DPs), single-layer networks of covalently linked monomers, show perspectives as membranes and in electronics. However, 2D polymerization of monomers in orthogonal directions limited the formation of 2DPs on nanoparticles (NPs) with high surface curvatures. Here we propose a high-curvature 2D polymerization to form a single-layer 2DP network as a non-contacting ligand on the surface of NPs for their stabilization and functionalization. The high-curvature 2D polymerization of amphiphilic Gemini monomers was conducted in situ on surfaces of NPs with various sizes, shapes, and materials, forming highly cross-linked 2DPs. Selective etching of core-shell NPs led to 2DPs as a non-contact ligand of yolk-shell structures with excellent shape retention and high NP-surface accessibility. In addition, by copolymerization, the 2DP ligands can covalently link to other functional molecules. This work promotes the development of 2DPs on NPs for their functional modification.

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Ligand Decomposition during Nanoparticle Synthesis: Influence of Ligand Structure and Precursor Selection

Aliphatic amine and carboxylic acid ligands are widely used as organic solvents during the bottom-up synthesis of inorganic nanoparticles (NPs). Although the ligands' ability to alter final NP properties has been widely studied, side reactivity of these ligands is emerging as an important mechanism to consider. In this work, we study the thermal decomposition of common ligands with varying functional groups (amines and carboxylic acids) and bond saturations (from saturated to polyunsaturated). Here, we investigate how these ligand properties influence decomposition in the absence and presence of precursors used in NP synthesis. We show that during the synthesis of inorganic chalcogenide NPs (Cu₂ZnSnS₄, Cu _x S, and SnS _x ) with metal acetylacetonate precursors and elemental sulfur, the ligand pyrolyzes, producing alkylated graphitic species. Additionally, there was less to no ligand decomposition observed during the sulfur-free synthesis of ZnO and CuO with metal acetylacetonate precursors. These results will help guide ligand selection for NP syntheses and improve reaction purity, an important factor in many applications.

Catalytic degradation of azo dyes by bimetallic nanoparticles loaded in smart polymer microgels

The contamination of water by azo dyes is increasing rapidly due to their waste use in textile industries. These dyes are very toxic for living things. Therefore, it is very important to remove these dyes from water. Various materials are reported for this purpose. Here, the most effective system of bimetallic nanoparticles in smart polymer microgels was prepared. The microgel system of N-isopropylmethacrylamide (NMA) (monomer) and methacrylic acid (MAa) (comonomer) was synthesized by a free radical precipitation polymerization method and then bimetallic (Ag/Ni) nanoparticles were encapsulated into the P(NMA-MAa) microgels by in situ reduction of both silver and nickel salts by NaBH₄ (reductant) after insertion of both (Ag⁺/Ni²⁺) ions. The P(NMA-MAa) microgels and Ag/Ni-P(NMA-MAa) hybrid microgels were characterized with FTIR, UV-vis, TGA, XRD, DLS, EDX, and STEM. The pH and temperature responsive behavior of Ag/Ni-P(NMA-MAa) was also evaluated. The catalytic efficiency of Ag/Ni-P(NMA-MAa) was assessed for degradation of methyl orange (MOr), congo red (CRe), eriochrome black T (EBlT) and methyl red (MRe) dyes under various conditions in aqueous medium. The apparent rate constant (k ₀) value for MOr, CRe, EBlT and MRe was found to be 0.925 min^-1, 0.486 min^-1, 0.540 min^-1 and 0.525 min^-1 respectively. The Ag/Ni-P(NMA-MAa) was found to be an excellent recyclable catalyst.

Nanomaterial and interface advances in immunoassay biosensors

Biosensors have been used for a remarkable array of applications, including infectious diseases, environmental monitoring, cancer diagnosis, food safety, and numerous others. In particular, the global COVID-19 pandemic has exposed a need for rapid tests, so the type of biosensor that has gained considerable interest recently are immunoassays, which are used for rapid diagnostics. The performance of paper-based lateral flow and dipstick immunoassays is influenced by the physical properties of the nanoparticles (NPs), NP-antibody conjugates, and paper substrate. Many materials innovations have enhanced diagnostics by increasing sensitivity or enabling unique readouts. However, negative side effects can arise at the interface between the biological sample and biomolecules and the NP or paper substrate, such as non-specific adsorption and protein denaturation. In this Perspective, we discuss the immunoassay components and highlight chemistry and materials innovations that can improve sensitivity. We also explore the range of bio-interface issues that can present challenges for immunoassays.

Formation of a Pt-MgO Solid Solution: Analysis by X-ray Absorption Fine Structure Spectroscopy

Thermal treatment of Pt nanoparticles or Pt(acac)₂ supported on MgO resulted in the formation of a solid solution of Pt-MgO, as evidenced by Pt L₃-edge X-ray absorption fine structure spectroscopy. The valence of Pt in the Pt-MgO solid solution was determined to be 4+. A characteristic shrinkage of the Pt-O bond distance was observed in comparison with that of the nearest-neighboring Mg-O bond in MgO, which agreed with the density functional theory (DFT) calculations. The segregation of Pt and MgO proceeded with a further increase in the thermal treatment temperature up to 1273 K. The dispersion of Pt on MgO measured through CO adsorption was much higher than that on Al₂O₃ or SiO₂ owing to the formation of the Pt-MgO solid solution.

TEMPO-oxidized cellulose for in situ synthesis of Pt nanoparticles. Study of catalytic and antimicrobial properties

In this work, platinum nanoparticles (PtNPs) were synthesized by a modified polyol process using TEMPO-oxidized nanocellulose (TOCN) as a stabilizing and co-reducing agent. Different ratios of TOCN nanocellulose to Pt⁴⁺ ions were studied to establish the optimum stabilizing effect of PtNPs. The effect of different pH of aqueous TOCN suspensions on the morphology of PtNPs was also examined. It was proved that PtNPs can be obtained solely in the presence of TOCN without the use of an additional reducing agent or ethylene glycol. The morphology and structural properties of the nanocellulose‑platinum nanoparticles composites were assessed using spectroscopic, microscopic and diffraction techniques, The catalytic performance in 4-nitrophenol reduction was evaluated. Significant differences in reaction rate constants k were found depending on the pH of the TOCN suspension applied during Pt⁴⁺ reduction. The crucial effect of reaction conditions on PtNPs performance was confirmed in tests of antibacterial efficacy against E. coli.

The Effect of Capping Agents on Gold Nanostar Stability, Functionalization, and Colorimetric Biosensing Capability

Capping agents (organic ligands, polymers, and surfactants) are pivotal for stabilizing nanoparticles; however, they may influence the surface chemistry, as well as the physico-chemical and biological characteristics, of gold nanostar (AuNS)-based biosensors. In this study, we proved that various capping agents affected capped and bioconjugated AuNS stability, functionality, biocatalysis, and colorimetric readouts. Capped and bioconjugated AuNSs were applied as localized surface plasmon resonance (LSPR)-based H2O2 sensors using glucose oxidase (GOx) as a model enzyme. Furthermore, our analyses revealed that the choice of capping agent influenced the properties of the AuNSs, their stability, and their downstream applications. Our analyses provide new insights into factors governing the choice of capping agents for gold nanostars and their influences on downstream applications with conjugated enzymes in confined environments.

Impact of Polymers on Magnesium-Based Hydrogen Storage Systems

In the present scenario, much importance has been provided to hydrogen energy systems (HES) in the energy sector because of their clean and green behavior during utilization. The developments of novel techniques and materials have focused on overcoming the practical difficulties in the HES (production, storage and utilization). Comparatively, considerable attention needs to be provided in the hydrogen storage systems (HSS) because of physical-based storage (compressed gas, cold/cryo compressed and liquid) issues such as low gravimetric/volumetric density, storage conditions/parameters and safety. In material-based HSS, a high amount of hydrogen can be effectively stored in materials via physical or chemical bonds. In different hydride materials, Mg-based hydrides (Mg–H) showed considerable benefits such as low density, hydrogen uptake and reversibility. However, the inferior sorption kinetics and severe oxidation/contamination at exposure to air limit its benefits. There are numerous kinds of efforts, like the inclusion of catalysts that have been made for Mg–H to alter the thermodynamic-related issues. Still, those efforts do not overcome the oxidation/contamination-related issues. The developments of Mg–H encapsulated by gas-selective polymers can effectively and positively influence hydrogen sorption kinetics and prevent the Mg–H from contaminating (air and moisture). In this review, the impact of different polymers (carboxymethyl cellulose, polystyrene, polyimide, polypyrrole, polyvinylpyrrolidone, polyvinylidene fluoride, polymethylpentene, and poly(methyl methacrylate)) with Mg–H systems has been systematically reviewed. In polymer-encapsulated Mg–H, the polymers act as a barrier for the reaction between Mg–H and O2/H2O, selectively allowing the H2 gas and preventing the aggregation of hydride nanoparticles. Thus, the H2 uptake amount and sorption kinetics improved considerably in Mg–H.

Compact Peptoid Molecular Brushes for Nanoparticle Stabilization

Controlling the interfaces and interactions of colloidal nanoparticles (NPs) via tethered molecular moieties is crucial for NP applications in engineered nanomaterials, optics, catalysis, and nanomedicine. Despite a broad range of molecular types explored, there is a need for a flexible approach to rationally vary the chemistry and structure of these interfacial molecules for controlling NP stability in diverse environments, while maintaining a small size of the NP molecular shell. Here, we demonstrate that low-molecular-weight, bifunctional comb-shaped, and sequence-defined peptoids can effectively stabilize gold NPs (AuNPs). The generality of this robust functionalization strategy was also demonstrated by coating of silver, platinum, and iron oxide NPs with designed peptoids. Each peptoid (PE) is designed with varied arrangements of a multivalent AuNP-binding domain and a solvation domain consisting of oligo-ethylene glycol (EG) branches. Among designs, a peptoid (PE5) with a diblock structure is demonstrated to provide a superior nanocolloidal stability in diverse aqueous solutions while forming a compact shell (∼1.5 nm) on the AuNP surface. We demonstrate by experiments and molecular dynamics simulations that PE5-coated AuNPs (PE5/AuNPs) are stable in select organic solvents owing to the strong PE5 (amine)-Au binding and solubility of the oligo-EG motifs. At the vapor-aqueous interface, we show that PE5/AuNPs remain stable and can self-assemble into ordered 2D lattices. The NP films exhibit strong near-field plasmonic coupling when transferred to solid substrates.

Polymer brush coated upconverting nanoparticles with improved colloidal stability and cellular labeling

Upconverting nanoparticles (UCNPs) possess great potential for biomedical application. UCNPs absorb and convert near-infrared (NIR) radiation in the biological imaging window to visible (Vis) and even ultraviolet (UV) radiation. NIR excitation offers reduced scattering and diminished autofluorescence in biological samples, whereas the emitted UV-Vis and NIR photons can be used for cancer treatment and imaging, respectively. However, UCNPs are usually synthesized in organic solvents and are not readily suitable for biomedical application due to the hydrophobic nature of their surface. Herein, we have removed the hydrophobic ligands from the synthesized UCNPs and coated the bare UCNPs with two custom-made hydrophilic polyelectrolytes (synthesized via the reversible addition-fragmentation chain transfer (RAFT) polymerization method). Polymers containing different amounts of PEGylated and carboxylic groups were studied. Coating with both polymers increased the upconversion (UC) emission intensity and photoluminescence lifetime values of the UCNPs, which directly translates to more efficient cancer cell labeling nanoprobes. The polymer composition plays a crucial role in the modification of UCNPs, not only with respect to their colloidal stability, but also with respect to the cellular uptake. Colloidally unstable bare UCNPs aggregate in cell culture media and precipitate, rendering themselves unsuitable for any biomedical use. However, stabilization with polymers prevents UCNPs from aggregation, increases their uptake in cells, and improves the quality of cellular labeling. This investigation sheds light on the appropriate coating for UCNPs and provides relevant insights for the rational development of imaging and therapeutic tools.

Synthesis and Catalytic Application of Ru-Deposited Magnetic nanoparticles for the selective hydrogenation of CO2 gas

:

In this report, a hybrid terpyridine (tpy) ligand functionalized with magnetic support was synthesized to obtain well-dispersed Ru NPs with a 2.0±0.5 nm mean size. This material was further analyzed using different analytical techniques before utilizing it as a catalyst for the CO¬2 hydrogenation reaction. A noticeable application of Ru-deposited magnetic nanoparticles as catalysts was observed during the CO2 hydrogenation. We successfully synthesized the formic acid with a high TON value under high-pressure reaction conditions. Easy recovery of the catalyst under the applied magnetic field helped us to reuse the catalyst up to 6 times with good TON and TOV value.

Starch-capped sulphur nanoparticles synthesised from bulk powder sulphur and their anti-phytopathogenic activity against Clavibacter sepedonicus

Water-soluble, stable nanoparticles of elemental sulphur with a size of 9-52 nm have been synthesised using the stabilising potential of starch. Sulphide anions were used as sulphur precursors that were generated earlier from the bulk powder sulphur in the base-reduction system NaOH-N2 H4 ·H2 O followed by their oxidation with molecular oxygen to element sulphur atoms. Using a set of modern spectral and microscopic methods (XRD, optical spectroscopy, DLS, TEM), the phase state, elemental composition of the nanocomposites and their nanomorphological characteristics have been investigated. It was found that nanocomposites are formed as sulphur particles with the shape which is nearly spherical dispersed in the polysaccharide starch matrix with a pronounced tendency to cluster into ring formations. Water solubility and stability of the obtained nanoparticles is ensured by sorption of starch macromolecules on the surface of sulphur nanoparticles, with the thickness of the stabilising shell in a range of 10-171 nm. In vitro experiments were carried out to study the anti-microbial activity of the obtained sulphur nanocomposite (1.6% S) using the propidium iodide fluorescent dye staining method and the diffusion method. It showed that the water solution of the starch-capped sulphur nanoparticles at the concentration of 6.25 µg/ml had a pronounced anti-phytopathogenic activity against the potato ring rot pathogen Clavibacter michiganensis subsp. sepedonicus.

Chiral plasmonic liquid crystal gold nanoparticles: self-assembly into a circular dichroism responsive helical lamellar superstructure

Owing to their proven and promising potential in various technological endeavors ranging from catalysis and sensing to invisibility cloaks made from metamaterials, chiral plasmonic superstructures resulting from the directed self-assembly of optically active metal nanoparticles (MNPs) have been pursued intensively in recent years. Several strategic efforts have emerged especially to accomplish advanced nanomaterials assembling into liquid crystalline (LC) helical structures, where MNPs are regularly packed in fluid/frozen arrays/layers or wires (columns). While the helical fluid columnar arrays (molecular wires) showing circular dichroism (CD) have been realized, the discovery of fluid chiral lamellar ordering, where the dielectric and conducting regimes are arranged alternatively, has hitherto remained highly elusive. Herein we report the first examples of monodisperse LC-gold NPs (LC-GNPs) self-assembling into a fluid/frozen lamellar structure exhibiting CD activity. Notably, these new, exceptional LC-GNPs have been realized by simple, hassle-free protocols that involve the room temperature addition of LC dimer-like arylamines to Au(iii), where the amines not only reduce Au(iii) to Au(0) but also bind strongly to the central GNP scaffold. Their molecular structure, mesomorphism, and ability to interact with circularly polarized light have been evidenced unambiguously and could play an important role in realizing metamaterials in the visible region.

Surface Engineering of Liquid Metal Nanodroplets by Attachable Diblock Copolymers

Liquid metal (LM) micro/nano droplets have promising applications in various fields such as flexible electronics, catalysis, and soft composites as well as biomedicines. However, the preparation of highly stable LM nanodroplets suspension based on eutectic gallium/indium (EGaIn) alloys is still challenging. Herein, we report a general and robust strategy to fabricate EGaIn nanodroplets stabilized by polymer brushes (polymer brushes/EGaIn nanodroplets) via in situ attachment of well-defined diblock copolymers with short poly(acrylic acid) (PAA) anchoring segments. Under ultrasonication, the anchoring PAA block is in situ attached onto the gallium oxide "skin" layer of EGaIn nanodroplets to form polymer brushes. The attachable diblock copolymer surfactants allow for highly efficient formation of EGaIn nanodroplets in high yield and with narrow size distribution. The polymer brushes/EGaIn nanodroplets contain very low fractions of attached polymer (<1 wt %) and exhibit high colloidal stability (>30 days) and good redispersibility. Precise control of polymer architecture by atom-transfer radical polymerization was employed to prepare various block copolymers for suspensions in a variety of solvents.

Colloidal stability of nanoparticles stabilized with mixed ligands in solvents with varying polarity

Colloidal stability of nanoparticles (NPs) strongly influences their synthesis, processing, and applications. For gold NPs stabilized with cetyl trimethylammonium bromide (CTAB) and polymer ligands we show that gradual increase in polarity of the water/aprotic solvent mixture leads to stabilization-aggregation-stabilization-aggregation transitions. We propose that these transitions are mediated by structural rearrangements of the CTAB layer on the NP surface.

Antimicrobial Metal Nanomaterials: From Passive to Stimuli-Activated Applications

The development of antimicrobial drug resistance among pathogenic bacteria and fungi is one of the most significant health issues of the 21st century. Recently, advances in nanotechnology have led to the development of nanomaterials, particularly metals that exhibit antimicrobial properties. These metal nanomaterials have emerged as promising alternatives to traditional antimicrobial therapies. In this review, a broad overview of metal nanomaterials, their synthesis, properties, and interactions with pathogenic micro-organisms is first provided. Secondly, the range of nanomaterials that demonstrate passive antimicrobial properties are outlined and in-depth analysis and comparison of stimuli-responsive antimicrobial nanomaterials are provided, which represent the next generation of microbiocidal nanomaterials. The stimulus applied to activate such nanomaterials includes light (including photocatalytic and photothermal) and magnetic fields, which can induce magnetic hyperthermia and kinetically driven magnetic activation. Broadly, this review aims to summarize the currently available research and provide future scope for the development of metal nanomaterial-based antimicrobial technologies, particularly those that can be activated through externally applied stimuli.

Effect of Structure of Polymers Grafted from Graphene Oxide on the Compatibility of Particles with a Silicone-Based Environment and the Stimuli-Responsive Capabilities of Their Composites

This study reports the utilization of controlled radical polymerization as a tool for controlling the stimuli-responsive capabilities of graphene oxide (GO) based hybrid systems. Various polymer brushes with controlled molecular weight and narrow molecular weight distribution were grafted from the GO surface by surface-initiated atom transfer radical polymerization (SI-ATRP). The modification of GO with poly(n-butyl methacrylate) (PBMA), poly(glycidyl methacrylate) (PGMA), poly(trimethylsilyloxyethyl methacrylate) (PHEMATMS) and poly(methyl methacrylate) (PMMA) was confirmed by thermogravimetric analysis (TGA) coupled with online Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Various grafting densities of GO-based materials were investigated, and conductivity was elucidated using a four-point probe method. Raman shift and XPS were used to confirm the reduction of surface properties of the GO particles during SI-ATRP. The contact angle measurements indicated the changes in the compatibility of GOs with silicone oil, depending on the structure of the grafted polymer chains. The compatibility of the GOs with poly(dimethylsiloxane) was also investigated using steady shear rheology. The tunability of the electrorheological, as well as the photo-actuation capability, was investigated. It was shown that in addition to the modification of conductivity, the dipole moment of the pendant groups of the grafted polymer chains also plays an important role in the electrorheological (ER) performance. The compatibility of the particles with the polymer matrix, and thus proper particles dispersibility, is the most important factor for the photo-actuation efficiency. The plasticizing effect of the GO-polymer hybrid filler also has a crucial impact on the matrix stiffness and thus the ability to reversibly respond to the external light stimulation.

The effect of phenylalanine ligands on the chiral-selective oxidation of glucose on Au(111)

As typical glucose oxidase nanozymes, gold nanoparticles (Au NPs) have attracted much attention due to their wide-ranging applications. Ligand caps, as the "cure-all solution" for NPs, not only play important roles in the size and shape control of Au NPs but also influence their catalytic activity and selectivity. A deep understanding of the catalytic mechanism and precise description of the important role of ligands can provide possible ways to design functional Au NPs. Here, with the specific example of Au(111) capped with chiral phenylalanine (Phe), the chiral selective oxidation mechanism of glucose and the important role of the ligands were studied via first-principles calculations. All results show that the dehydrogenation of glucose to form glucono delta-lactone (GDL) is favored on clean Au(111), while the subsequent hydrolysis of GDL is the rate-limiting step for glucose oxidation. The flat and nonchiral Au(111) surface shows negligible selectivity in relation to the oxidation of d- and l-glucose, while chiral Phe-Au(111) shows selective adsorption towards d- and l-glucose. l-Phe-capped Au(111) prefers to adsorb d-glucose, while d-Phe-capped Au(111) prefers to adsorb l-glucose. Considering the three steps in the capped ligand catalysis (adsorption, replacement and reaction), we propose that the ligands play key roles in selectively adsorbing reactants before the subsequent exchange and reaction steps.

Ultradeep hydrodesulfurization of fuel over superior NiMoS phases constructed by a novel Ni(MoS4)2(C13H30N)2 precursor

Ni(MoS₄)₂(C₁₃H₃₀N)₂ was synthesized and adopted for preparing a NiMoS/γ-Al₂O₃ hydrodesulfurization catalyst, and the as-prepared catalyst exhibits superior 4,6-dimethyldibenzothiophene hydrodesulfurization activity.

Controlled Phase Behavior of Thermally Sensitive Poly(N-isopropylacrylamide/ionic liquid) with Embedded Au Nanoparticles

We have synthesized a series of poly(N-isopropylacrylamide/ionic liquid) with deposited Au nanoparticles. The size of the nanoparticle range was varied from 10 to 35 nm, and these were characterized by transmission electron microscopy analysis. Ionic liquids (IL) were chosen by varying the polymerizable unit to be both in cationic (allyl) and anionic (acrylate) moiety. One-pot polymerization was done with N-isopropylacrylamide and IL using ammonium persulphate as the initiator, to which were added already prepared Au NPs. These thermally sensitive composites formed, possessed reversible swelling/deswelling abilities in water, and demonstrated a reversible visible phase transition, which was detected by differential scanning calorimetric measurements. The lower critical solution temperature (LCST) showed dependency on the size of nanoparticles and the IL independently. It was seen that the LCST of PNIPAM-based composite films can be tuned from 32 °C to a range of 23-67 °C by choosing the desired Au NP size, its concentration and kind of IL.

Helicoidal Patterning of Gold Nanorods by Phase Separation in Mixed Polymer Brushes

The spatial distribution of polymer ligands on the surface of nanoparticles (NPs) is of great importance because it determines their interactions with each other and with the surrounding environment. Phase separation in mixtures of polymer brushes has been studied for spherical NPs; however, the role of local surface curvature of nonspherical NPs in the surface phase separation of end-grafted polymer ligands remains an open question. Here, we examined phase separation in mixed monolayers of incompatible polystyrene and poly(ethylene glycol) brushes end-capping the surface of gold nanorods in a good solvent. By varying the molar ratio between these polymers, we generated a range of surface patterns, including uniform and nonuniform polystyrene shells, randomly distributed polystyrene surface patches, and, most interestingly, a helicoidal pattern of polystyrene patches wrapping around the nanorods. The helicoidally patterned nanorods exhibited long-term colloidal stability in a good solvent. The helicoidal wrapping of the nanorods was achieved for the mixtures of polymers with different molecular weights and preserved when the quality of the solvent for the polymers was reduced. The helicoidal organization of polymer patches on the surface of nanorods can be used for templating the synthesis or self-assembly of helicoidal multicomponent nanomaterials.

To what extent do polymeric stabilizers affect nanoparticles characteristics?

Colloidal synthesis of nanoparticles using polymeric stabilizers as a template of a structure directing agent provided a plethora of opportunities in fabricating nanoparticles (NPs) with controlled size, shape, composition and structural characteristics. To understand the complete potency of polymeric stabilizers during the synthesis of nanoparticles, the relationship between polymer characteristics such as structure, molecular weight and concentration and nanoparticles characteristics is discussed in depth. This review portrays the use of polymers to attain nanostructured materials via covalent and non-covalent approaches. These polymers can also serve as surfaces modifier as well as the growth regulators during the synthesis of nanomaterials. The effect provided by polymers that directs the formation of nanomaterials into desired forms is otherwise hard to achieve. We especially spotlight on the approaches for tuning the characteristic properties of nanoparticles via cautious choice of the polymer system with special focus to stimuli-responsive polymers. This review mainly focusses on answering the main challenging question; what is the ideal polymeric stabilizer system to obtain specific morphology, size and phase structure of nanoparticles? Such vital information will enable rational design of nanoparticles to meet specific needs for different applications.

Role of Stabilizing Surfactants on Capacitance, Charge, and Ion Transport in Organic Nanoparticle-Based Electronic Devices

Deposition of functionalized nanoparticles onto solid surfaces has created a new revolution in electronic devices. Surface adsorbates such as ionic surfactants or additives are often used to stabilize such nanoparticle suspensions; however, little is presently known about the influence of such surfactants and additives on specific electronic and chemical functionality of nanoparticulate electronic devices. This work combines experimental measurements and theoretical models to probe the role of an ionic surfactant in the fundamental physical chemistry and electronic charge carrier behavior of photodiode devices prepared using multicomponent organic electronic nanoparticles. A large capacitance was detected, which could be subsequently manipulated using the external stimuli of light, temperature, and electric fields. It was demonstrated that analyzing this capacitance through the framework of classical semiconductor analysis produced substantially misleading information on the electronic trap density of the nanoparticles. Electrochemical impedance measurements demonstrated that it is actually the stabilizing surfactant that creates capacitance through two distinct mechanisms, each of which influenced charge carrier behavior differently. The first mechanism involved a dipole layer created at the contact interfaces by mobile ions, a mechanism that could be replicated by addition of ions to solution-cast devices and was shown to be the major origin of restricted electronic performance. The second mechanism consisted of immobile ionic shells around individual nanoparticles and was shown to have a minor impact on device performance as it could be removed upon addition of electronic charge in the photodiodes through either illumination or external bias. The results confirmed that the surfactant ions do not create a significantly increased level of charge carrier traps as has been previously suspected, but rather, preventing the diffusion of mobile ions through the nanoparticulate film and their accumulation at contacts is critical to optimize the performance.

Three dimensional sea-urchin-like PdAuCu nanocrystals/ferrocene-grafted-polylysine as an efficient probe to amplify the electrochemical signals for ultrasensitive immunoassay of carcinoembryonic antigen

A novel sandwich-like immunosensor was efficiently fabricated for detection of carcinoembryonic antigen (CEA) with three dimensional sea-urchin-like PdAuCu nanocrystals (PdAuCu NCs)/ferrocene-grafted-polylysine (Fc-g-PLL) as the label of secondary antibodies (Ab₂) and Au nanoparticles (Au NPs) as the substrate material. Herein, PdAuCu NCs were directly synthesized with polyethylene oxide (PEO) as a growth-directing agent by a facile one-step aqueous method without any organic solvent. Meanwhile, Fc-g-PLL was obtained by covalent linkage of Fc with PLL via Schiff-base reaction. The well-dispersed PdAuCu NCs by Fc-g-PLL have the enlarged surface area, enhanced catalytic properties and superior biocompatibility to amplify the current signals. The resultant immunosensor shows linear relationship of the electrochemical responses with the CEA concentrations within a broader linear range (0.001-100.0 ng mL^-1) and a lower detection limit (0.23 pg mL^-1, S/N = 3). Furthermore, the immunosensor was explored for practical assay of CEA in human serum samples with accredited results. The novel immunoassay provides a feasible platform for early medical diagnosis.

Colloidal Stability of Apolar Nanoparticles: Role of Ligand Length

Inorganic nanoparticle cores are often coated with organic ligands to render them dispersible in apolar solvents. However, the effect of the ligand shell on the colloidal stability of the overall hybrid particle is not fully understood. In particular, it is not known how the length of an apolar alkyl ligand chain affects the stability of a nanoparticle dispersion against agglomeration. Here, small-angle X-ray scattering and molecular dynamics simulations have been used to study the interactions between gold nanoparticles and between cadmium selenide nanoparticles passivated by alkanethiol ligands with 12-18 carbons in the solvent decane. We find that increasing the ligand length increases colloidal stability in the core-dominated regime but decreases it in the ligand-dominated regime. This unexpected inversion is connected to the transition from ligand-dominated to core-dominated agglomeration when the core diameter increases at constant ligand length. Our results provide a microscopic picture of the forces that determine the colloidal stability of apolar nanoparticles and explain why classical colloid theory fails.

Catalytic activity of nickel nanoparticles stabilized by adsorbing polymers for enhanced carbon sequestration

This work shows the potential of nickel (Ni) nanoparticles (NPs) stabilized by polymers for accelerating carbon dioxide (CO₂) dissolution into saline aquifers. The catalytic characteristics of Ni NPs were investigated by monitoring changes in diameter of CO₂ microbubbles. An increase in ionic strength considerably reduces an electrostatic repulsive force in pristine Ni NPs, thereby decreasing their catalytic potential. This study shows how cationic dextran (DEX), nonionic poly(vinyl pyrrolidone) (PVP), and anionic carboxy methylcellulose (CMC) polymers, the dispersive behaviors of Ni NPs can be used to overcome the negative impact of salinity on CO₂ dissolution. The cationic polymer, DEX was less adsorbed onto NPs surfaces, thereby limiting the Ni NPs’ catalytic activity. This behavior is due to a competition for Ni NPs’ surface sites between the cation and DEX under high salinity. On the other hand, the non/anionic polymers, PVP and CMC could be relatively easily adsorbed onto anchoring sites of Ni NPs by the monovalent cation, Na⁺. Considerable dispersion of Ni NPs by an optimal concentration of the anionic polymers improved their catalytic capabilities even under unfavorable conditions for CO₂ dissolution. This study has implications for enhancing geologic sequestration into deep saline aquifers for the purposes of mitigating atmospheric CO₂ levels.

Trithiocarbonate-Functionalized PNiPAAm-Based Nanocomposites for Antimicrobial Properties

In this study, four trithiocarbonate-functionalized PNiPAAms with different molecular weights were synthesized and used as a matrix to form composites with silver nanoparticles. Nanocomposites with several polymer-to-silver ratios P:Ag⁺ were prepared in order to evaluate the influence of silver loading. UV studies showed a thermoresponsive behavior of the nanocomposites with a thermo-reversibility according to cooling-heating cycles. Release kinetics demonstrated that the release of silver ions is mainly influenced by the size of the silver nanoparticles (AgNPs), which themselves depend on the polymer length. Antimicrobial tests against E. coli and S. aureus showed that some of the nanocomposites are antimicrobial and even full killing could be induced.

Circular assembly of colloidal nanoparticles at the liquid-air interface mediated by block copolymers

The self-assembly of colloidal nanoparticles (NPs) mediated by block copolymers (BCPs) is an efficient way for fabricating nanocomposite superstructures with precise geometric control. Here we report a generalized liquid-air interfacial strategy by exploiting the versatility in tuning the specific affinities between the grafted polymeric ligands and BCPs, enabling the circular assembly of NPs on a liquid surface to afford unique ring-like superstructures. Fe3O4 NPs act as the model system; however, CoFe2O4 and Au NPs are also demonstrated using the proposed assembly method. Functionalizing NPs with a specific polymeric ligand is the key to achieve the circular assembly of NPs, while both the subphase and the solvent annealing temperature have profound influence on the microphase separation behaviors of BCPs and therefore the morphology of the resulting NP assemblies. Moreover, the co-assembly of two types of NPs grafted with distinct polymeric ligands enables unprecendented heterogeneous concentric rings, with each ring consisting of one type of NP.

Environmental behavior of coated NMs: Physicochemical aspects and plant interactions

The application of nanomaterials (NMs) depends on several characteristics, including polydispersity, shape, surface charge, and composition, among others. However, the specific surface properties of bare NMs induce aggregation, reducing their utilization. Thus, different surface coverages have been developed to avoid or minimize NMs aggregation, making them more stable for the envisioned applications. Carbon-based NMs are usually coated with metals, while metal-based NMs are coated with natural organic compounds including chitosan, dextran, alginate, or citric acid. On the other hand, the coating process is expected to modify the surface properties of the NMs; several coating agents add negative or positive charges to the particles, changing their interaction with the environment. In this review, we analyze the most recent literature about coating processes and the behavior of coated NMs in soil, water, and plants. In particular, the behavior of the most commercialized metal-based NMs, such as TiO₂, ZnO, CeO₂, CuO, Ag, and Au, and carbon-based NMs are discussed in this review. The available articles about the effects of coated NMs in plants are discussed. Up to now, there is no uniformity in the information to ensure that the surface coverage increases or decreases the effects of NMs in plants. While some parameters are increased, others are decreased. Since the data is contradictory in some cases, the available literature does not allow researchers to determine what concentrations benefit the plants. This review highlights current results and future perspectives on the study of the effects of coated NMs in the environment.

Modulating interactions between ligand-coated nanoparticles and phase-separated lipid bilayers by varying the ligand density and the surface charge

The interactions between nanoparticles and lipid bilayers are critical in applications of nanoparticles in nanomedicine, cell imaging, toxicology, and elsewhere. Here, we investigate the interactions between nanoparticles coated with neutral and/or charged ligands and phase-separated lipid bilayers using coarse-grained molecular dynamics simulation. Both penetration and adsorption processes as well as the final distribution of the nanoparticles can be readily modulated by varying the ligand density and the surface charge of the nanoparticles. Completely hydrophobic (neutral) nanoparticles with larger size initially preferentially penetrate into the liquid-disordered region of the lipid bilayer and finally transfer into the liquid-ordered region; partially hydrophilic nanoparticles with low or moderate surface charge tend to either distribute in the liquid-disordered region or be adsorbed on the surface of the lipid bilayer, while strongly hydrophilic nanoparticles with high surface charge always reside on the surface of the lipid bilayer. Interactions of the nanoparticles with the lipid bilayers are affected by the surface charge of nanoparticles, hydrophobic mismatch, bending of the ligands, and the packing state of the lipids. Insight in these factors can be used to improve the efficiency of designing nanoparticles for specific applications.