Recent advances in aerosol devices for the delivery of inhaled medications

A clinician's guide to single vs multiple inhaler therapy for COPD

INTRODUCTION

In the management of chronic obstructive pulmonary disease (COPD), inhalation therapy plays a pivotal role. However, clinicians often face the dilemma of choosing between single and multiple inhaler therapies for their patients. This choice is critical because it can affect treatment efficacy, patient adherence, and overall disease management.

AREAS COVERED

This article examines the advantages and factors to be taken into consideration when selecting between single and multiple inhaler therapies for COPD.

EXPERT OPINION

Both single and multiple inhaler therapies must be considered in COPD management. While single inhaler therapy offers simplicity and convenience, multiple inhaler therapy provides greater flexibility and customization. Clinicians must carefully evaluate individual patient needs and preferences to determine the most appropriate inhaler therapy regimen. Through personalized treatment approaches and shared decision-making, clinicians can optimize COPD management and improve patient well-being. Nevertheless, further research is required to compare the effectiveness of single versus multiple inhaler strategies through rigorous clinical trials, free from industry bias, to determine the optimal inhaler strategy. Smart inhaler technology appears to have the potential to enhance adherence and personalized management, but the relative merits of smart inhalers in single inhaler regimens versus multiple inhaler regimens remain to be determined.

On the Feasibility of Rugose Lipid Microparticles in Pressurized Metered Dose Inhalers with Established and New Propellants

Pressurized metered dose inhalers (pMDIs) require optimized formulations to provide stable, consistent lung delivery. This study investigates the feasibility of novel rugose lipid particles (RLPs) as potential drug carriers in pMDI formulations. The physical stability of RLPs was assessed in three different propellants: the established HFA-134a and HFA-227ea and the new low global-warming-potential (GWP) propellant HFO-1234ze. A feedstock containing DSPC and calcium chloride was prepared without pore forming agent to spray dry two RLP batches at inlet temperatures of 55 °C (RLP55) and 75 °C (RLP75). RLPs performance in pMDI formulations was compared to two reference samples that exhibit significantly different performance when suspended in propellants: well-established engineered porous particles and particles containing 80% trehalose and 20% leucine (80T20L). An accelerated stability study at 40 °C and relative humidity of 7% ± 5% was conducted over 3 months. At different time points, a shadowgraphic imaging technique was used to evaluate the colloidal stability of particles in pMDIs. Field emission electron microscopy with energy dispersive X-ray spectroscopy was used to evaluate the morphology and elemental composition of particles extracted from the pMDIs. After 2 weeks, all 80T20L formulations rapidly aggregated upon agitation and exhibited significantly inferior colloidal stability compared to the other samples. In comparison, both the RLP55 and RLP75 formulations, regardless of the propellant used, retained their rugose structure and demonstrated excellent suspension stability comparable with the engineered porous particles. The studied RLPs demonstrate great potential for use in pMDI formulations with HFA propellants and the next-generation low-GWP propellant HFO-1234ze.

Nanobodies to multiple spike variants and inhalation of nanobody-containing aerosols neutralize SARS-CoV-2 in cell culture and hamsters

The ongoing threat of COVID-19 has highlighted the need for effective prophylaxis and convenient therapies, especially for outpatient settings. We have previously developed highly potent single-domain (VHH) antibodies, also known as nanobodies, that target the Receptor Binding Domain (RBD) of the SARS-CoV-2 Spike protein and neutralize the Wuhan strain of the virus. In this study, we present a new generation of anti-RBD nanobodies with superior properties. The primary representative of this group, Re32D03, neutralizes Alpha to Delta as well as Omicron BA.2.75; other members neutralize, in addition, Omicron BA.1, BA.2, BA.4/5, and XBB.1. Crystal structures of RBD-nanobody complexes reveal how ACE2-binding is blocked and also explain the nanobodies' tolerance to immune escape mutations. Through the cryo-EM structure of the Ma16B06-BA.1 Spike complex, we demonstrated how a single nanobody molecule can neutralize a trimeric spike. We also describe a method for large-scale production of these nanobodies in Pichia pastoris, and for formulating them into aerosols. Exposing hamsters to these aerosols, before or even 24 h after infection with SARS-CoV-2, significantly reduced virus load, weight loss and pathogenicity. These results show the potential of aerosolized nanobodies for prophylaxis and therapy of coronavirus infections.

Survey-based investigation into the current use of paediatric medicines and administration devices in China

The accurate, rapid and convenient administration of medicines to children is not possible without the use of appropriate administration devices. However, due to the unique nature of this patient population, inappropriate paediatric medication administration has been widely observed worldwide. According to previous surveys carried out in other countries including the UK and Japan, there has been a wide variation in the handling of paediatric devices among children. To date, little is known about the current situation in China where the variety of available paediatric administration devices is more limited than in Europe and the UK. The aim of this study was therefore to conduct a China-wide survey to gain a better understanding of the perspectives of children and their caregivers on paediatric medicines and devices. This study was conducted throughout China with 215 children as well as 749 caregivers of paediatric year groups from 1 to less than 18 years old. The majority of participants (83%) took oral dosage forms where granules, syrup and tablets were ranked as the Top 3 commonly used oral dosage forms. The most commonly used devices, i.e., measuring cups (47.3%) and household spoons (41.1%) were both well accepted by the vast majority of children. More instruction and demonstration by the healthcare professionals were provided to inhalation devices users with the nebuliser and facemask being the most commonly used. In particular, the role of pharmacists in China is expected to be better defined, which may in turn help with the education provided to paediatric users in operating medical devices. The data collected varied considerably with the age of children but not statistically significantly with the region in which the survey was conducted.

Inhalation delivery of nucleic acid gene therapies in preclinical drug development

INTRODUCTION

Inhaled gene therapy programs targeting diseases of the lung have seen increasing interest in recent years, though as of yet no product has successfully entered the market. Preclinical research to support such programs is critically important in maximizing the chances of developing successful candidates.

AREAS COVERED

Aspects of inhalation delivery of gene therapies are reviewed, with a focus on preclinical research in animal models. Various barriers to inhalation delivery of gene therapies are discussed, including aerosolization stresses, aerosol behavior in the respiratory tract, and disposition processes post-deposition. Important aspects of animal models are considered, including determinations of biologically relevant determinations of dose and issues related to translatability.

EXPERT OPINION

Development of clinically-efficacious inhaled gene therapies has proven difficult owing to numerous challenges. Fit-for-purpose experimental and analytical methods are necessary for determinations of biologically relevant doses in preclinical animal models. Further developments in disease-specific animal models may aid in improving the translatability of results in future work, and we expect to see accelerated interests in inhalation gene therapies for various diseases. Sponsors, researchers, and regulators are encouraged to engage in early and frequent discussion regarding candidate therapies, and additional dissemination of preclinical methodologies would be of immense value in avoiding common pitfalls.

Advances in soft mist inhalers

INTRODUCTION

Soft mist inhalers (SMIs) are propellant-free inhalers that utilize mechanical power to deliver single or multiple doses of inhalable drug aerosols in the form of a slow mist to patients. Compared to traditional inhalers, SMIs allow for a longer and slower release of aerosol with a smaller ballistic effect, leading to a limited loss in the oropharyngeal area, whilst requiring little coordination of actuation and inhalation by patients. Currently, the Respimat® is the only commercially available SMI, with several others in different stages of preclinical and clinical development.

AREAS COVERED

The primary purpose of this review is to critically assess recent advances in SMIs for the delivery of inhaled therapeutics.

EXPERT OPINION

Advanced particle formulations, such as nanoparticles which target specific areas of the lung, Biologics, such as vaccines, proteins, and antibodies (which are sensitive to aerosolization), are expected to be generally delivered by SMIs. Furthermore, repurposed drugs are expected to constitute a large share of future formulations to be delivered by SMIs. SMIs can also be employed for the delivery of formulations that target systemic diseases. Finally, digitalizing SMIs would improve patient adherence and provide clinicians with fundamental insights into patients' treatment progress.

A nasal spray vaccination device based on Laval nozzle and its experimental test

In order to realize the application of the nasal spray vaccination in the prevention and protection of respiratory infectious diseases, a nasal spray vaccination device is designed in this paper. The device uses a Laval nozzle structure to generate a high-speed airflow that impinges on the vaccine reagent and forms nebulized particles. Through optimizing of the Laval nozzle structure and testing experiments on spray particle size, spray velocity, spray angle and spray rate, a set of parameters which is applicable to actual nasal spray vaccination is obtained. The experimental results show that when the air source pressure is 2 bar, the spray angle is about 15°, the diameter of the spray particles Dv50 is about 17 μm, the volume fraction of particles with diameter smaller than 10um is about 24%, the spray rate is close to 300 μl/s. The vaccine activity tests demonstrate that under these conditions, not only the biological activity of vaccines is guaranteed, but also the delivery efficiency is well assured.

A Pilot Study Exploiting the Industrialization Potential of Solid Lipid Nanoparticle-Based Metered-Dose Inhalers

BACKGROUND

Delivery of inhalable nanoparticles through metered-dose inhalers (MDI) is a promising approach to treat lung disease such as asthma and chronic obstructive pulmonary disease. Nanocoating of the inhalable nanoparticles helps in stability and cellular uptake enhancement but complicates the production process. Thus, it is meaningful to accelerate the translation process of MDI encapsulating inhalable nanoparticles with nanocoating structure.

METHODS

In this study, solid lipid nanoparticles (SLN) are selected as a model inhalable nanoparticle system. An established reverse microemulsion strategy was utilized to explore the industrialization potential of SLN-based MDI. Three categories of nanocoating with the functions of stabilization (by Poloxamer 188, encoded as SLN(0)), cellular uptake enhancement (by cetyltrimethylammonium bromide, encoded as SLN(+)), and targetability (by hyaluronic acid, encoded as SLN(-)) were constructed upon SLN, whose particle size distribution and zeta-potential were characterized. Subsequently, SLN were loaded into MDI, and evaluated for the processing reliability, physicochemical nature, formulation stability, and biocompatibility.

RESULTS

The results elucidated that three types of SLN-based MDI were successfully fabricated with good reproducibility and stability. Regarding safety, SLN(0) and SLN(-) showed negligible cytotoxicity on cellular level.

CONCLUSIONS

This work serves as a pilot study for the scale-up of SLN-based MDI, and could be useful for the future development of inhalable nanoparticles.

Pollen-Inspired Shell-Core Aerosol Particles Capable of Brownian Motion for Pulmonary Vascularization

Nebulization is the most widely used respiratory delivery technique with non-invasive properties. However, nebulized drugs often fail to function due to the excretion and immune clearance of the respiratory system. In this work, inspired by pollen in nature, novel shell-core aerosol particles (APs) capable of Brownian motion are constructed for respiratory delivery. Drugs-loaded poly(lactic-co-glycolic acid) nanoparticles are prepared by emulsification to form the inner core, and the membranes of macrophages are extracted to form the outer shell. The optimized size and the shell-core structure endow APs with Brownian motion and atomization stability, thus enabling the APs to reach the bronchi and alveoli deeply for effective deposition. Camouflaging the macrophage membranes equips the APs with immune evasion. In vitro experiments prove that deferoxamine (DFO)-loaded APs (DFO@APs) can promote the angiogenesis of human umbilical vein endothelial cells. A hyperoxia-induced bronchopulmonary dysplasia (BPD) model is constructed to validate the efficiency of DFO@APs. In BPD mice, DFO@APs can release DFO in the alveolar interstitium, thus promoting the reconstruction of microvasculature, ultimately inducing lung development for treating BPD. In conclusion, this study develops "pollen"-inspired shell-core aerosol particles capable of Brownian motion, which provides a novel idea and theoretical basis for respiratory administration.

Spray freeze dried niclosamide nanocrystals embedded dry powder for high dose pulmonary delivery

Based on the drug repositioning strategy, niclosamide (NCL) has shown potential applications for treating COVID-19. However, the development of new formulations for effective NCL delivery is still challenging. Herein, NCL-embedded dry powder for inhalation (NeDPI) was fabricated by a novel spray freeze drying technology. The addition of Tween-80 together with 1,2-Distearoyl-sn-glycero-3-phosphocholine showed the synergistic effects on improving both the dispersibility of primary NCL nanocrystals suspended in the feed liquid and the spherical structure integrity of the spray freeze dried (SFD) microparticle. The SFD microparticle size, morphology, crystal properties, flowability and aerosol performance were systematically investigated by regulating the feed liquid composition and freezing temperature. The addition of leucine as the aerosol enhancer promoted the microparticle sphericity with greatly improved flowability. The optimal sample (SF_{- 80}D-N₂₀L₂D₂T₁) showed the highest fine particle fraction of ∼47.83%, equivalently over 3.8 mg NCL that could reach the deep lung when inhaling 10 mg dry powders.

Actinide Decorporation: A Review on Chelation Chemistry and Nanocarriers for Pulmonary Administration

Chelation is considered the best method for detoxification by promoting excretion of actinides (Am, Np, Pu, Th, U) from the human body after internal contamination. Chemical agents that possess carboxylic acid or hydroxypyridinonate groups play a vital role in actinide decorporation. In this review article, we provide considerable background details on the chelation chemistry of actinides with an aim to formulate better decorporation agents. Nanocarriers for pulmonary delivery represent an exciting prospect in the development of novel therapies for actinide decorporation that both reduce toxic side effects of the agent and improve its retention in the body. Recent studies have demonstrated the benefits of using a nebulizer or an inhaler to administer chelating agents for the decorporation of actinides. Effective chelation therapy with large groups of internally contaminated people can be a challenge unless both the agent and the nanocarrier are readily available from strategic national stockpiles for radiological or nuclear emergencies. Sunflower lecithin is particularly adept at alleviating the burden of administration when used to form liposomes as a nanocarrier for pulmonary delivery of diethylenetriamine-pentaacetic acid (DTPA) or hydroxypyridinone (HOPO). Better physiologically-based pharmacokinetic models must be developed for each agent in order to minimize the frequency of multiple doses that can overload the emergency response operations.

Additive manufacturing in respiratory sciences - Current applications and future prospects

Additive Manufacturing (AM) comprises a variety of techniques that enable fabrication of customised objects with specific attributes. The versatility of AM procedures and constant technological improvements allow for their application in the development of medicinal products and medical devices. This review provides an overview of AM applications related to respiratory sciences. For this purpose, both fields of research are briefly introduced and the potential benefits of integrating AM to respiratory sciences at different levels of pharmaceutical development are highlighted. Tailored manufacturing of microstructures as a particle design approach in respiratory drug delivery will be discussed. At the dosage form level, we exemplify AM as an important link in the iterative loop of data driven inhaler design, rapid prototyping and in vitro testing. This review also presents the application of bioprinting in the respiratory field for design of biorelevant in vitro cellular models, followed by an overview of AM-related processes in preventive and therapeutic care. Finally, this review discusses future prospects of AM as a component in a digital health environment.

The future of inhalation therapy in chronic obstructive pulmonary disease

The inhaled route is critical for the administration of drugs to treat patients suffering from COPD, but there is still an unmet need for new and innovative inhalers to address some limitations of existing products that do not make them suitable for many COPD patients. The treatment of COPD, currently limited to the use of bronchodilators, corticosteroids, and antibiotics, requires a significant expansion of the therapeutic armamentarium that is closely linked to the widening of knowledge on the pathogenesis and evolution of COPD. The great interest in the development of new drugs that may be able to interfere in the natural history of the disease is leading to the synthesis of numerous new molecules, of which however only a few have entered the stages of clinical development. On the other hand, further improvement of inhaled drug delivery could be an interesting possibility because it targets the organ of interest directly, requires significantly less drug to exert the pharmacological effect and, by lowering the amount of drug needed, reduces the cost of therapy. Unfortunately, however, the development of new inhaled drugs for use in COPD is currently too slow.

Emerging trends in pulmonary delivery of biopharmaceuticals

Over the years, a tendency toward biopharmaceutical products as therapeutics has been witnessed compared with small molecular drugs. Biopharmaceuticals possess greater specificity, selectivity and potency with fewer side effects. The pulmonary route is a potential noninvasive route studied for the delivery of various molecules, including biopharmaceuticals. It directly delivers drugs to the lungs in higher concentrations and provides greater bioavailability than other noninvasive routes. This review focuses on the pulmonary route for the delivery of biopharmaceuticals. We have covered various biopharmaceuticals, including peptides, recombinant proteins, enzymes, monoclonal antibodies and nucleic acids, administered via a pulmonary route and discussed their rewards and drawbacks.

Aerosolized drug delivery in awake and anesthetized children to treat bronchospasm

Bronchospasm is a common respiratory adverse event in pediatric anesthesia. First-line treatment commonly includes inhaled salbutamol. This review focuses on the current best practice to deliver aerosolized medications to awake as well as anesthetized pediatric patients and discusses the advantages and disadvantages of various administration techniques. Additionally, we detail the differences between various airway devices used in anesthesia. We highlight the unmet need for innovation of orally inhaled drug products to deliver aerosolized medications during pediatric respiratory critical events such as bronchospasm. It is therefore important that clinicians remain up to date with the best clinical practice for aerosolized drug delivery in order to prevent and efficiently treat pediatric patients experiencing life-threatening respiratory emergencies.

Inhaled Medicines: Past, Present, and Future

The purpose of this review is to summarize essential pharmacological, pharmaceutical, and clinical aspects in the field of orally inhaled therapies that may help scientists seeking to develop new products. After general comments on the rationale for inhaled therapies for respiratory disease, the focus is on products approved approximately over the last half a century. The organization of these sections reflects the key pharmacological categories. Products for asthma and chronic obstructive pulmonary disease include β -2 receptor agonists, muscarinic acetylcholine receptor antagonists, glucocorticosteroids, and cromones as well as their combinations. The antiviral and antibacterial inhaled products to treat respiratory tract infections are then presented. Two "mucoactive" products-dornase α and mannitol, which are both approved for patients with cystic fibrosis-are reviewed. These are followed by sections on inhaled prostacyclins for pulmonary arterial hypertension and the challenging field of aerosol surfactant inhalation delivery, especially for prematurely born infants on ventilation support. The approved products for systemic delivery via the lungs for diseases of the central nervous system and insulin for diabetes are also discussed. New technologies for drug delivery by inhalation are analyzed, with the emphasis on those that would likely yield significant improvements over the technologies in current use or would expand the range of drugs and diseases treatable by this route of administration. SIGNIFICANCE STATEMENT: This review of the key aspects of approved orally inhaled drug products for a variety of respiratory diseases and for systemic administration should be helpful in making judicious decisions about the development of new or improved inhaled drugs. These aspects include the choices of the active ingredients, formulations, delivery systems suitable for the target patient populations, and, to some extent, meaningful safety and efficacy endpoints in clinical trials.

Improving the risk-to-benefit ratio of inhaled corticosteroids through delivery and dose: current progress and future directions

INTRODUCTION

Inhaled corticosteroids (ICS) are known to increase the risk of systemic and local adverse effects, especially with high doses and long-term use. Hence, considerable resources are invested to improve pharmacokinetic/pharmacodynamic (PK/PD) properties of ICS, effective delivery systems and novel combination therapies to enhance the risk-to-benefit ratio of ICS.

AREAS COVERED

There is an unmet need for new solutions to achieve optimal clinical outcomes with minimal dose of ICS. This paper gives an overview of novel treatment strategies regarding the safety of ICS therapy on the basis of the three most recent molecules introduced to our everyday clinical practice - ciclesonide, mometasone furoate, and fluticasone furoate. Advances in aerosol devices and new areas of inhalation therapy are also discussed.

EXPERT OPINION

Current progress in improving the risk-to-benefit ratio of ICS through dose and delivery probably established pathways for further developments. This applies both to the improvement of the PK/PD properties of ICS molecules but also includes technical aspects that lead to simplified applicability of the device with simultaneous optimal drug deposition in the lungs. Indubitably, the future of medicine lies not only in the development of new molecules but also in technology and digital revolution.

In Vitro Evaluation of Aerosol Delivery by Hand-Held Mesh Nebulizers in an Adult Spontaneous Breathing Lung Model

Background: Drug inhalation is common mode of treatment for chronic obstructive pulmonary disease (COPD). The aim of this study was to evaluate the efficiency of aerosol devices in a simulated COPD adult lung model using five commercially available hand-held mesh nebulizers. Materials and Methods: Five nebulizers (PARI VELOX^®, Omron NE-U22, Aeroneb^® Go, APEX PY001, and Pocket Air^®) were tested with a unit dose of 5.0 mg/2.5 mL salbutamol. An in vitro lung model (compliance: 0.06 L/cm H₂O, resistance: 20 cm H₂O/L/sec) was constructed to simulate parameters (tidal volume of 500 mL, respiratory rate of 15 breaths/min, inspiratory time of 1 second) of an adult patient with COPD. A bacterial filter was attached at the bronchi level for drug collection, referring as inhaled mass. After nebulization, the inhaled mass (%), dose remaining on each component (%), particle size characteristics, and nebulizer performances were analyzed. Particle size characteristics were analyzed using an 8-stage Anderson Cascade Impactor. The salbutamol particles deposited were eluted and analyzed using a spectrophotometer at 276 nm. The inhaled mass (%), dose remaining on each component (%), particle size distribution, and nebulizer performance were statistically analyzed using analysis of variance (ANOVA) with Sheffee post hoc tests. Results: Pocket Air and APEX PY001 showed the greatest inhaled mass and the lowest dose in the mouthpiece connection. The largest and smallest mass median aerodynamic diameters were found with Omron NE-U22 and PARI VELOX, respectively. In addition, the output rate and inhaled aerosol rate (IAR) of PARI VELOX were higher than those of other nebulizers. Conclusions: This study showed that the performance of commercially available mesh nebulizers varied. Aerosol particles deposited on different auxiliary equipment directly influenced the output rate and IAR of the mesh nebulizer. Clinical validation of the drug IAR is necessary to avoid overdose and reduce drug wastage.

A path to successful patient outcomes through aerosol drug delivery to children: a narrative review

Although using aerosolized medications is a mainstay of treatment in children with asthma and other respiratory diseases, there are many issues in terms of device and interface selection, delivery technique and dosing, as well as patient and parental education that have not changed for half a century. Also, due to many aerosol devices and interfaces available on the market and the broad range of patient characteristics and requirements, providing effective aerosol therapy to children becomes a challenge. While aerosol delivery devices are equally effective, if they are age-appropriate and used correctly, the majority of aerosol devices require multiple steps to be used efficiently. Unfortunately, many children with pulmonary diseases have problems with the correct delivery technique and do not gain therapeutic benefits from therapy that result in poor disease management and increased healthcare costs. Therefore, the purpose of this paper is to review the current knowledge on aerosol delivery devices used in children and guide clinicians on the optimum device- and interface-selection, delivery technique, and dosing in this patient population. Strategies on how to deliver aerosolized medications in crying and distressed children and how to educate parents on aerosol therapy and promote patient adherence to prescribed medications are also provided. Future directions of aerosol therapy in children should focus on these issues and implement policies and clinical practices that highlight the potential solutions to these problems.

How to deliver aerosolized medications through high flow nasal cannula safely and effectively in the era of COVID-19 and beyond: A narrative review

Background

The treatments of COVID-19 involve some degree of uncertainty. Current evidence also shows mixed findings with regards to bioaerosol dispersion and airborne transmission of COVID-19 during high flow nasal cannula (HFNC) therapy. While coping with this global pandemic created hot debates on the use of HFNC, it is important to bring detached opinions and current evidence to the attention of health care professionals (HCPs) who may need to use HFNC in patients with COVID-19.

Aim

The purpose of this paper is to provide a framework on the selection, placement, and use of nebulizers as well as HFNC prongs, gas flow, and delivery technique via HFNC to help clinicians deliver aerosolized medications through HFNC safely and effectively in the era of COVID-19 and beyond.

Methods

We searched PubMed, Medline, CINAHL, and Science Direct to identify studies on aerosol drug delivery through HFNC using the following keywords: (“aerosols,” OR “nebulizers”) AND (“high flow nasal cannula” OR “high flow oxygen therapy” OR “HFNC”) AND (“COVID-19,” OR “SARS-CoV-2”). Twenty-eight articles including in vitro studies, randomized clinical trials, scintigraphy studies, review articles, prospective and retrospective research were included in this review.

Discussion and results

It is not clear if the findings of the previous studies on bacterial contamination could be applied to viral transmission because they do not provide data that could be extrapolated to the risk of SARS-CoV-2 transmission. In the face of the unknown risk with the transmission of COVID-19 during HFNC therapy, the benefits of HFNC must be weighed against the risk of infection to HCPs and other patients. Due to the limited number of ventilators available in hospitals and the confirmed effectiveness of HFNC in treating hypoxemic respiratory failure, HFNC may prevent early intubation, and prolonged intensive care unit stays in patients with COVID-19.

Conclusion

Clinicians should review the magnitude of this risk based on current evidence and use the suggested strategies of this paper for safe and effective delivery of aerosolized medications through HFNC in the era of COVID-19 and beyond.

Inhaled fixed-dose combination powders for the treatment of respiratory infections

INTRODUCTION

Respiratory infections are a major cause of morbidity and mortality. As an alternative to systemic drug administration, inhaled drug delivery can produce high drug concentrations in the lung tissue to overcome resistant bacteria. The development of inhaled fixed-dose combination powders (I-FDCs) is promising next step in this field, as it would enable simultaneous drug-drug or drug-adjuvant delivery at the site of infection, thereby promoting synergistic activity and improving patient compliance.

AREAS COVERED

This review covers the clinical and pharmaceutical rationales for the development of I-FDCs for the treatment of respiratory infections, relevant technologies for particle and powder generation, and obstacles which must be addressed to achieve regulatory approval.

EXPERT OPINION

I-FDCs have been widely successful in the treatment of asthma and chronic obstructive pulmonary disease; however, application of I-FDCs towards the treatment of respiratory infections carries additional challenges related to the high dose requirements and physicochemical characteristics of anti-infective drugs. At present, co-spray drying is an especially promising approach for the development of composite fixed-dose anti-infective particles for inhalation. Though the majority of fixed-dose research has thus far focused on the combination of multiple antibiotics, future work may shift to the additional inclusion of immunomodulatory agents or repurposed non-antibiotics.

In-vitro and particle image velocimetry studies of dry powder inhalers

Inhalation drug delivery has seen a swift rise in the use of dry powder inhalers (DPIs) to treat chronic respiratory conditions. However, universal adoption of DPIs has been restrained due to their low efficiencies and significant drug losses in the mouth-throat region. Aerosol efficiency of DPIs is closely related to the fluid-dynamics characteristics of the inhalation flow generated from the devices, which in turn are influenced by the device design. In-vitro and particle image velocimetry (PIV) have been used in this study to assess the aerosol performance of a model carrier formulation delivered by DPI devices and to investigate their flow characteristics. Four DPI device models, with modification to their tangential inlets and addition of a grid, have been explored. Similar aerosol performances were observed for all four device models, with FPF larger than 50%, indicating desirable lung deposition. A high swirling and recirculating jet-flow emerging from the mouthpiece of the DPI models without the grid was observed, which contributed to particle deposition in the throat. DPI models where the grid was present showed a straightened outflow without undesired lateral spreading, that reduced particle deposition in the throat and mass retention in the device. These findings demonstrate that PIV measurements strengthen in-vitro evaluation and can be jointly used to develop high-performance DPIs.

Traditional Chinese medicine combined with pulmonary drug delivery system and idiopathic pulmonary fibrosis: Rationale and therapeutic potential

•

Pathogenesis and characteristics of idiopathic pulmonary fibrosis (IPF) are presented.

•

The history and current situation of traditional Chinese medicine (TCM) in treating lung diseases are introduced.

•

Therapeutic mechanisms of different TCM to treat IPF are summarized.

•

Advantages and types of pulmonary drug delivery systems (PDDS) are emphasized.

•

Combining TCM with PDDS is a potential strategy to treat IPF.

Idiopathic pulmonary fibrosis (IPF) is a progressive pulmonary interstitial inflammatory disease of unknown etiology, and is also a sequela in severe patients with the Coronavirus Disease 2019 (COVID-19). Nintedanib and pirfenidone are the only two known drugs which are conditionally recommended for the treatment of IPF by the FDA. However, these drugs pose some adverse side effects such as nausea and diarrhoea during clinical applications. Therefore, it is of great value and significance to identify effective and safe therapeutic drugs to solve the clinical problems associated with intake of western medicine. As a unique medical treatment, Traditional Chinese Medicine (TCM) has gradually exerted its advantages in the treatment of IPF worldwide through a multi-level and multi-target approach. Further, to overcome the current clinical problems of oral and injectable intakes of TCM, pulmonary drug delivery system (PDDS) could be designed to reduce the systemic metabolism and adverse reactions of the drug and to improve the bioavailability of drugs. Through PubMed, Google Scholar, Web of Science, and CNKI, we retrieved articles published in related fields in recent years, and this paper has summarized twenty-seven Chinese compound prescriptions, ten single TCM, and ten active ingredients for effective prevention and treatment of IPF. We also introduce three kinds of inhaling PDDS, which supports further research of TCM combined with PDDS to treat IPF.

siRNA delivery to macrophages using aspherical, nanostructured microparticles as delivery system for pulmonary administration

The delivery of oligonucleotides such as siRNA to the lung is a major challenge, as this group of drugs has difficulties to overcome biological barriers due to its polyanionic character and the associated hydrophilic properties, resulting in inefficient delivery. Especially in diseases such as asthma, chronic obstructive pulmonary disease and cystic fibrosis, where increased proinflammation is present, a targeted RNA therapy is desirable due to the high potency of these oligonucleotides. To address these problems and to ensure efficient uptake of siRNA in macrophages, a microparticulate, cylindrical delivery system was developed. In the first step, this particle system was tested for its aerodynamic characteristics to evaluate the aerodynamic properties to optimize lung deposition. The mass median aerodynamic diameter of 2.52 ± 0.23 µm, indicates that the desired target should be reached. The inhibition of TNF-α release, as one of the main mediators of proinflammatory reactions, was investigated. We could show that our carrier system can be loaded with siRNA against TNF-α. Gel electrophoreses allowed to demonstrate that the load can be incorporated and released without being degraded. The delivery system was found to transport a mass fraction of 0.371% [%w/w] as determined by inductively coupled plasma mass spectroscopy. When investigating the release kinetics, the results showed that several days are necessary to release a major amount of the siRNA indicating a sustained release. The cylindrical microparticles with an aspect ratio of 3.3 (ratio of length divided by width) were then tested in vitro successfully reducing TNF-α release from human macrophages significantly by more than 30%. The developed formulation presents a possible oligonucleotide delivery system allowing due to its internal structure to load and protect siRNA.

Synergistic activity of phage PEV20-ciprofloxacin combination powder formulation-A proof-of-principle study in a P. aeruginosa lung infection model

Combination treatment using bacteriophage and antibiotics is potentially an advanced approach to combatting antimicrobial-resistant bacterial infections. We have recently developed an inhalable powder by co-spray drying Pseudomonas phage PEV20 with ciprofloxacin. The purpose of this study was to assess the in vivo effect of the powder using a neutropenic mouse model of acute lung infection. The synergistic activity of PEV20 and ciprofloxacin was investigated by infecting mice with P. aeruginosa, then administering freshly spray-dried single PEV20 (10⁶ PFU/mg), single ciprofloxacin (0.33 mg/mg) or combined PEV20-ciprofloxacin treatment using a dry powder insufflator. Lung tissues were then harvested for colony counting and flow cytometry analysis at 24 h post-treatment. PEV20 and ciprofloxacin combination powder significantly reduced the bacterial load of clinical P. aeruginosa strain in mouse lungs by 5.9 log₁₀ (p < 0.005). No obvious reduction in the bacterial load was observed when the animals were treated only with PEV20 or ciprofloxacin. Assessment of immunological responses in the lungs showed reduced inflammation associating with the bactericidal effect of the PEV20-ciprofloxacin powder. In conclusion, this study has demonstrated the synergistic potential of using the combination PEV20-ciprofloxacin powder for P. aeruginosa respiratory infections.

MiRNAs in tuberculosis: Their decisive role in the fate of TB

Tuberculosis (TB) is one of the most lethal global infectious diseases. Despite the availability of much higher levels of technology in health and medicine, tuberculosis still remains a serious global health problem. Mycobacterium tuberculosis has the capacity for prolonged survival inside macrophages by exploiting host metabolic and energy pathways and perturbing autophagy and apoptosis of infected cells. The mechanism(s) underlying this process are not completely understood but evidence suggests that mycobacteria subvert the host miRNA network to enable mycobacterial survival. We present here a comprehensive review on the role of miRNAs in TB immune escape mechanisms and the potential for miRNA-based TB therapeutics. Further validation studies are required to (i) elucidate the precise effect of TB on host miRNAs, (ii) determine the inhibition of mycobacterial burden using miRNA-based therapies and (iii) identify novel miRNA biomarkers that may prove useful in TB diagnosis and treatment monitoring.