Solid lipid matrix mediated nanoarchitectonics for improved oral bioavailability of drugs

3D printed scaffolds with quercetin and vitamin D3 nanocarriers: In vitro cellular evaluation

Increasing bone diseases and anomalies significantly challenge bone regeneration, necessitating the development of innovative implantable devices for effective healing. This study explores the potential of 3D-printed calcium phosphate (CaP) scaffolds functionalized with natural medicine to address this issue. Specifically, quercetin and vitamin D3 (QVD) encapsulated solid lipid nanoparticles (QVD-SLNs) are incorporated into the scaffold to enhance bone regeneration. The melt emulsification method is utilized to achieve high drug encapsulation efficiency (~98%) and controlled biphasic release kinetics. The process-structure-property performance of these systems allows more controlled release while maintaining healthy cell-material interactions. The functionalized scaffolds show ~1.3- and ~-1.6-fold increase in osteoblast cell proliferation and differentiation, respectively, as compared with the control. The treated scaffold demonstrates a reduction in osteoclastic activity as compared with the control. The QVD-SLN-loaded scaffolds show ~4.2-fold in vitro chemopreventive potential against osteosarcoma cells. Bacterial assessment with both Staphylococcus aureus and Pseudomonas aeruginosa shows a significant reduction in bacterial colony growth over the treated scaffold. These findings summarize that the release of QVD-SLNs through a 3D-printed CaP scaffold can treat various bone-related disorders for low or non-load-bearing applications.

Anti-depressant effect of Naringenin-loaded hybridized nanoparticles in diabetic rats via PPARγ/NLRP3 pathway

Naringenin (NAR) has various biological activities but low bioavailability. The current study examines the effect of Naringenin-loaded hybridized nanoparticles (NAR-HNPs) and NAR on depression induced by streptozotocin (STZ) in rats. NAR-HNPs formula with the highest in vitro NAR released profile, lowest polydispersity index value (0.21 ± 0.02), highest entrapment efficiency (98.7 ± 2.01%), as well as an acceptable particle size and zeta potential of 415.2 ± 9.54 nm and 52.8 ± 1.04 mV, respectively, was considered the optimum formulation. It was characterized by differential scanning calorimetry, examined using a transmission electron microscope, and a stability study was conducted at different temperatures to monitor its stability efficiency showing that NAR-HNP formulation maintains stability at 4 °C. The selected formulation was subjected to an acute toxicological test, a pharmacokinetic analysis, and a Diabetes mellitus (DM) experimental model. STZ (50 mg/kg) given as a single i.p. rendered rats diabetic. Diabetic rat groups were allocated into 4 groups: one group received no treatment, while the remaining three received oral doses of unloaded HNPs, NAR (50 mg/kg), NAR-HNPs (50 mg/kg) and NAR (50 mg/kg) + peroxisome proliferator-activated receptor-γ (PPAR-γ) antagonist, GW9662 (1mg/kg, i.p.) for three weeks. Additional four non-diabetic rat groups received: distilled water (normal), free NAR, and NAR-HNPs, respectively for three weeks. NAR and NAR-HNPs reduced immobility time in forced swimming test and serum blood glucose while increasing serum insulin level. They also reduced cortical and hippocampal 5-hydroxyindoeacetic acid, 3,4-Dihydroxy-phenylacetic acid, malondialdehyde, NLR family pyrin domain containing-3 (NLRP3) and interleukin-1beta content while raised serotonin, nor-epinephrine, dopamine and glutathione level. PPAR-γ gene expression was elevated too. So, NAR and NAR-HNPs reduced DM-induced depression by influencing brain neurotransmitters and exhibiting anti-oxidant and anti-inflammatory effects through the activation PPAR-γ/ NLRP3 pathway. NAR-HNPs showed the best pharmacokinetic and therapeutic results.

Molecular machines working at interfaces: physics, chemistry, evolution and nanoarchitectonics

As a post-nanotechnology concept, nanoarchitectonics combines nanotechnology with advanced materials science. Molecular machines made by assembling molecular units and their organizational bodies are also products of nanoarchitectonics. They can be regarded as the smallest functional materials. Originally, studies on molecular machines analyzed the average properties of objects dispersed in solution by spectroscopic methods. Researchers' playgrounds partially shifted to solid interfaces, because high-resolution observation of molecular machines is usually done on solid interfaces under high vacuum and cryogenic conditions. Additionally, to ensure the practical applicability of molecular machines, operation under ambient conditions is necessary. The latter conditions are met in dynamic interfacial environments such as the surface of water at room temperature. According to these backgrounds, this review summarizes the trends of molecular machines that continue to evolve under the concept of nanoarchitectonics in interfacial environments. Some recent examples of molecular machines in solution are briefly introduced first, which is followed by an overview of studies of molecular machines and similar supramolecular structures in various interfacial environments. The interfacial environments are classified into (i) solid interfaces, (ii) liquid interfaces, and (iii) various material and biological interfaces. Molecular machines are expanding their activities from the static environment of a solid interface to the more dynamic environment of a liquid interface. Molecular machines change their field of activity while maintaining their basic functions and induce the accumulation of individual molecular machines into macroscopic physical properties molecular machines through macroscopic mechanical motions can be employed to control molecular machines. Moreover, research on molecular machines is not limited to solid and liquid interfaces; interfaces with living organisms are also crucial.

Food-derived peptides as novel therapeutic strategies for NLRP3 inflammasome-related diseases: a systematic review

NLRP3 (NOD-, LRR- and pyrin domain-containing protein 3), a member of the nucleotide-binding domain (NOD) and leucine-rich repeat sequence (LRR) protein (NLR) family, plays an essential role in the inflammation initiation and inflammatory mediator secretion, and thus is also associated with many disease progressions. Food-derived bioactive peptides (FDBP) exhibit excellent anti-inflammatory activity in both in vivo and in vitro models. They are encrypted in plant, meat, and milk proteins and can be released under enzymatic hydrolysis or fermentation conditions, thereby hindering the progression of hyperuricemia, inflammatory bowel disease, chronic liver disease, neurological disorders, lung injury and periodontitis by inactivating the NLRP3. However, there is a lack of systematic review around FDBP, NLRP3, and NLRP3-related diseases. Therefore, this review summarized FDBP that exert inhibiting effects on NLRP3 inflammasome from different protein sources and detailed their preparation and purification methods. Additionally, this paper also compiled the possible inhibitory mechanisms of FDBP on NLRP3 inflammasomes and its regulatory role in NLRP3 inflammasome-related diseases. Finally, the progress of cutting-edge technologies, including nanoparticle, computer-aided screening strategy and recombinant DNA technology, in the acquisition or encapsulation of NLRP3 inhibitory FDBP was discussed. This review provides a scientific basis for understanding the anti-inflammatory mechanism of FDBP through the regulation of the NLRP3 inflammasome and also provides guidance for the development of therapeutic adjuvants or functional foods enriched with these FDBP.

Rhein methotrexate-decorated solid lipid nanoparticles altering adjuvant arthritis progression through endoplasmic reticulum stress-mediated apoptosis

Methotrexate (MTX) and diacerein (DIA) are two of the most potent disease-modifying anti-rheumatic drugs used for the treatment of rheumatoid arthritis (RA). DIA has reflected some GIT and hepatobiliary manifestations in numerous cases. It undergoes biotransformation in the liver into the active metabolite rhein (RH) which is characterized by its excellent anti-inflammatory activity and lower side effects. However, RH's hydrophobic nature and low bioavailability do not encourage its use in RA. The current study aims to use RH in combination with MTX in targeted solid lipid nanoparticles (RH-MTX-SLNs) for better effectiveness and shadowing light on its possible mechanistic pathways. RH-MTX-SLNs were prepared and assessed for their quality attributes. The effect of the formulation was assessed in-vivo in an adjuvant arthritis animal model investigating the role of the endoplasmic reticulum stress (ERS)-induced apoptosis. Results revealed that RH-MTX-SLNs were in the suitable nanosized range with high negative zeta potential indicating good stability. In-vivo, RH-MTX-SLNs significantly improved all measured inflammatory and arthritic markers, confirmed by electron microscopy and histology examination of the joints. Besides, the formulation was able to alter the ERS-mediated apoptosis. In conclusion, RH-MTX-SLNs can represent a promising therapeutic approach for RA showing significant anti-arthritic activity.

Recombinant VEGF-C (Cys156Ser) improves mesenteric lymphatic drainage and gut immune surveillance in experimental cirrhosis

Background & Aims

Lymphatic vessels (LVs) are crucial for maintaining abdominal fluid homoeostasis and immunity. In cirrhosis, mesenteric LVs (mLVs) are dilated and dysfunctional. Given the established role of vascular endothelial growth factor-C (VEGF-C) in improving LVs, we hypothesised that VEGF-C treatment could ameliorate the functions of mLVs in cirrhosis.

Methods

In this study, we developed a nanoformulation comprising LV-specific growth factor, recombinant human VEGF-C (Cys156Ser) protein (E-VEGF-C) and delivered it orally in different models of rat cirrhosis to target mLVs. Cirrhotic rats were given nanoformulation without VEGF-C served as vehicles. Drainage of mLVs was analysed using tracer dye. Portal and systemic physiological assessments and computed tomography were performed to measure portal pressures and ascites. Gene expression and permeability of primary mesenteric lymphatic endothelial cells (LyECs) was studied. Immune cells in mesenteric lymph nodes (MLNs) were quantified by flow cytometry. Endogenous and exogenous gut bacterial translocation to MLNs was examined.

Results

In cirrhotic rats, mLVs were dilated and leaky with impaired drainage. Treatment with E-VEGF-C induced proliferation of mLVs, reduced their diameter, and improved functional drainage. Ascites and portal pressures were significantly reduced in E-VEGF-C rats compared with vehicle rats. In MLNs of E-VEGF-C animals, CD8+CD134+ T cells were increased, whereas CD25+ regulatory T cells were decreased. Both endogenous and exogenous bacterial translocation were limited to MLNs in E-VEGF-C rats with reduced levels of endotoxins in ascites and blood in comparison with those in vehicle rats. E-VEGF-C treatment upregulated the expression of vascular endothelial-cadherin in LyECs and functionally improved the permeability of these cells.

Conclusions

E-VEGF-C treatment ameliorates mesenteric lymph drainage and portal pressure and strengthens cytotoxic T-cell immunity in MLNs in experimental cirrhosis. It may thus serve as a promising therapy to manage ascites and reduce pathogenic gut bacterial translocation in cirrhosis.

Impact and Implications

A human recombinant pro-lymphangiogenic growth factor, VEGF-C, was encapsulated in nanolipocarriers (E-VEGF-C) and orally delivered in different models of rat liver cirrhosis to facilitate its gut lymphatic vessel uptake. E-VEGF-C administration significantly increased mesenteric lymphatic vessel proliferation and improved lymph drainage, attenuating abdominal ascites and portal pressures in the animal models. E-VEGF-C treatment limited bacterial translocation to MLNs only with reduced gut bacterial load and ascitic endotoxins. E-VEGF-C therapy thus holds the potential to manage ascites and portal pressure and reduce gut bacterial translocation in patients with cirrhosis.

Gout therapeutics and drug delivery

Gout is a common inflammatory arthritis caused by persistently elevated uric acid levels. With the improvement of people's living standards, the consumption of processed food and the widespread use of drugs that induce elevated uric acid, gout rates are increasing, seriously affecting the human quality of life, and becoming a burden to health systems worldwide. Since the pathological mechanism of gout has been elucidated, there are relatively effective drug treatments in clinical practice. However, due to (bio)pharmaceutical shortcomings of these drugs, such as poor chemical stability and limited ability to target the pathophysiological pathways, traditional drug treatment strategies show low efficacy and safety. In this scenario, drug delivery systems (DDS) design that overcome these drawbacks is urgently called for. In this review, we initially describe the pathological features, the therapeutic targets, and the drugs currently in clinical use and under investigation to treat gout. We also comprehensively summarize recent research efforts utilizing lipid, polymeric and inorganic carriers to develop advanced DDS for improved gout management and therapy.

A short review on the applicability and use of cubosomes as nanocarriers

Abstract

Cubosomes are nanostructured lipid-based particles that have gained significant attention in the field of drug delivery and nanomedicine. These unique structures consist of a three-dimensional cubic lattice formed by the self-assembly of lipid molecules. The lipids used to construct cubosomes are typically nonionic surfactants, such as monoolein, which possess both hydrophilic and hydrophobic regions, allowing them to form stable, water-dispersible nanoparticles. One of the key advantages of cubosomes is their ability to encapsulate and deliver hydrophobic as well as hydrophilic drugs. The hydrophobic regions of the lipid bilayers provide an ideal environment for incorporating lipophilic drugs, while the hydrophilic regions can encapsulate water-soluble drugs. This versatility makes cubosomes suitable for delivering a wide range of therapeutic agents, including small molecules, proteins, peptides, and nucleic acids. The unique structure of cubosomes also offers stability and controlled release benefits. The lipid bilayers provide a protective barrier, shielding the encapsulated drugs from degradation and improving their stability. Moreover, the cubic lattice arrangement enables the modulation of drug release kinetics by varying the lipid composition and surface modifications. This allows for the development of sustained or triggered drug release systems, enhancing therapeutic efficacy and reducing side effects. Furthermore, cubosomes can be easily modified with targeting ligands or surface modifications to achieve site-specific drug delivery, enhancing therapeutic selectivity and reducing off-target effects. In conclusion, cubosomes offer a versatile and promising platform for the delivery of therapeutic agents. In this manuscript, we will highlight some of these applications.

Graphical abstract

Microfluidics for nano-drug delivery systems: From fundamentals to industrialization

In recent years, owing to the miniaturization of the fluidic environment, microfluidic technology offers unique opportunities for the implementation of nano drug delivery systems (NDDSs) production processes. Compared with traditional methods, microfluidics improves the controllability and uniformity of NDDSs. The fast mixing and laminar flow properties achieved in the microchannels can tune the physicochemical properties of NDDSs, including particle size, distribution and morphology, resulting in narrow particle size distribution and high drug-loading capacity. The success of lipid nanoparticles encapsulated mRNA vaccines against coronavirus disease 2019 by microfluidics also confirmed its feasibility for scaling up the preparation of NDDSs via parallelization or numbering-up. In this review, we provide a comprehensive summary of microfluidics-based NDDSs, including the fundamentals of microfluidics, microfluidic synthesis of NDDSs, and their industrialization. The challenges of microfluidics-based NDDSs in the current status and the prospects for future development are also discussed. We believe that this review will provide good guidance for microfluidics-based NDDSs.

Enhanced anti-inflammatory and ulcerogenicity of Ibuprofen microsphere formulations using Irvingia wombolu fat (IRW) and moringa oil (MO) as co-lipids

Ibuprofen is a member of the propionic acid class of nonsteroidal anti-inflammatory drugs (NSAIDs) with anti-inflammatory, analgesic, and antipyretic activities used to relieve a variety of pains. The objective of this study was to formulate, characterize and evaluate the in vitro and in vivo properties of ibuprofen formulated as solid lipid microspheres (SLMs) for enhanced delivery. The mixtures of Irvingia wombolu fat (IRW) and moringa oil (MO) each with Phospholipon® 90G (PL90G) at the ratio of 2:1 w/w were prepared by fusion, characterized and used to prepare SLMs. The SLMS were thereafter evaluated using the following parameters: particle size and morphology, stability, and encapsulation efficiency EE (%). In vitro release was carried out in phosphate buffer (pH 7.4). The ibuprofen based SLMs were also evaluated for anti-inflammatory and anti-ulcer effects using animal models. The pH showed significant increase after two months of formulation with a maximum value of 6.4 while the EE obtained were 95.6, 89.4 and 61.6% for SLMs formulated with lipid matrix of Phospholipon® 90G (1% and 2%), and MO (1%) respectively. The in vitro release showed maximum release of 87.8 and 98.97% of the two different lipid-based formulations while anti-inflammatory effect was up to 89.90% after 5 h of inducing inflammation. The SLMs did not show any lesion thus conferring gastroprotection on the formulations. The SLMs exhibited good anti-inflammatory property with gastroprotective action.

Solid lipid nanoparticles, an effective carrier for classical antifungal drugs

Solid-lipid nanoparticles (SLNs) are an innovative group of nanosystems used to deliver medicine to their respective targets with better efficiency and bioavailability in contrast to classical formulations. SLNs are less noxious, have fewer adverse effects, have more biocompatibility, and have easy biodegradability. Lipophilic, hydrophilic and hydrophobic drugs can be loaded into SLNs, to enhance their physical and chemical stability in critical environments. Certain antifungal agents used in different treatments are poorly soluble medications, biologicals, proteins etc. incorporated in SLNs to enhance their therapeutic outcome, increase their bioavailability and target specificity. SLNs-based antifungal agents are currently helpful against vicious drug-resistant fungal infections. This review covers the importance of SLNs in drug delivery of classical antifungal drugs, historical background, preparation, physicochemical characteristic, structure and sizes of SLNs, composition, drug entrapment efficacy, clinical evaluations and uses, challenges, antifungal drug resistance, strategies to overcome limitations, novel antifungal agents currently in clinical trials with special emphasis on fungal infections.

Enhanced Cytotoxic Activity of 6-Mercaptopurine-Loaded Solid Lipid Nanoparticles in Hepatic Cancer Treatment

6-Mercaptopurine (6-MCP) is an antiproliferative purine analog used in acute lymphoblastic leukemia, non-Hodgkin lymphoma, and inflammatory bowel disease (Crohn's disease, ulcerative colitis). Although 6-MCP has the great therapeutic potential for cancer and immunosuppressant-related diseases, 6-MCP is not readily soluble in water, presents a high first-pass effect, short half-life (0.5-1.5 h), and implies a low bioavailability (16%). On the contrary, solid lipid nanoparticles (SLNs) are prepared from solid lipids at room temperature and body temperature. In this study, SLNs were prepared w/o/w double emulsion-solvent evaporation method using Precirol ATO5 as matrix lipid. In the emulsion stabilization, surfactant (Tween 80) and polymeric stabilizer (polyvinyl alcohol [PVA]) were used. Two group formulations using Tween 80 and PVA were compared in terms of particle size, polydispersity index, zeta potential encapsulation efficiency%, and process yield%. Differential calorimetric analysis and release properties were examined for optimum formulation, and release kinetics were calculated. According to studies, sustained release was obtained with SLNs by the Korsmayer-Peppas kinetic model. The in vitro cytotoxicity studies were performed on the hepatocarcinoma (HEP3G) cell line. According to the results, successful SLN formulations were produced, and PVA was found best stabilizer. Optimum formulation exhibited significantly higher cytotoxic effects on HEP3G than on pure 6-MCP. These results demonstrated that solid lipid nanodrug delivery systems have great potential for formulation of 6-MCP.

Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) Prepared by Microwave and Ultrasound-Assisted Synthesis: Promising Green Strategies for the Nanoworld

Many pharmaceutically active molecules are highly lipophilic, which renders their administration and adsorption in patients extremely challenging. Among the countless strategies to overcome this problem, synthetic nanocarriers have demonstrated superb efficiency as drug delivery systems, since encapsulation can effectively prevent a molecules' degradation, thus ensuring increased biodistribution. However, metallic and polymeric nanoparticles have been frequently associated with possible cytotoxic side effects. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), which are prepared with physiologically inert lipids, therefore emerged as an ideal strategy to bypass toxicities issues and avoid the use of organic solvents in their formulations. Different approaches to preparation, using only moderate amounts of external energy to facilitate a homogeneous formation, have been proposed. Greener synthesis strategies have the potential to provide faster reactions, more efficient nucleation, better particle size distribution, lower polydispersities, and furnish products with higher solubility. Particularly microwave-assisted synthesis (MAS) and ultrasound-assisted synthesis (UAS) have been utilized in the manufacturing of nanocarrier systems. This narrative review addresses the chemical aspects of those synthesis strategies and their positive influence on the characteristics of SLNs and NLCs. Furthermore, we discuss the limitations and future challenges for the manufacturing processes of both types of nanoparticles.

Nanosystems for Brain Targeting of Antipsychotic Drugs: An Update on the Most Promising Nanocarriers for Increased Bioavailability and Therapeutic Efficacy

Orally administered antipsychotic drugs are the first-line treatment for psychotic disorders, such as schizophrenia and bipolar disorder. Nevertheless, adverse drug reactions jeopardize clinical outcomes, resulting in patient non-compliance. The design formulation strategies for enhancing brain drug delivery has been a major challenge, mainly due to the restrictive properties of the blood-brain barrier. However, recent pharmacokinetic and pharmacodynamic in vivo assays confirmed the advantage of the intranasal route when compared to oral and intravenous administration, as it allows direct nose-to-brain drug transport via neuronal pathways, reducing systemic side effects and maximizing therapeutic outcomes. In addition, the incorporation of antipsychotic drugs into nanosystems such as polymeric nanoparticles, polymeric mixed micelles, solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions, nanoemulgels, nanosuspensions, niosomes and spanlastics, has proven to be quite promising. The developed nanosystems, having a small and homogeneous particle size (ideal for nose-to-brain delivery), high encapsulation efficiency and good stability, resulted in improved brain bioavailability and therapeutic-like effects in animal models. Hence, although it is essential to continue research in this field, the intranasal delivery of nanosystems for the treatment of schizophrenia, bipolar disorder and other related disorders has proven to be quite promising, opening a path for future therapies with higher efficacy.

Improved uptake and bioavailability of cinnamaldehyde via solid lipid nanoparticles for oral delivery

OBJECTIVE

The purpose of this experiment was to explore the effect of Solid lipid nanoparticles (SLNs) on improving the oral absorption and bioavailability of cinnamaldehyde (CA).

METHODS

CA-SLNs were prepared by high-pressure homogenization and characterized by particle size, entrapment efficiency, and morphology, thermal behavior and attenuated total reflection Fourier transform infrared (ATR-FTIR). In vitro characteristics of release, stability experiments, cytotoxicity, uptake and transport across Caco-2 cell monolayer of CA-SLNs were studied as well. In addition, CA-SLNs underwent pharmacokinetic and gastrointestinal mucosal irritation studies in rats.

RESULTS

CA-SLNs exhibited a spherical shape with a particle size of 44.57 ± 0.27 nm, zeta potential of -27.66 ± 1.9 mV and entrapment efficiency of 83.63% ± 2.16%. Differential scanning calorimetry (DSC) and ATR-FTIR confirmed that CA was well encapsulated. In vitro release of CA-SLNs displayed that most of the drug (90.77% ± 5%) was released in the phosphate buffer, and only a small amount of drug (18.55% ± 5%) was released in the HCl buffer. CA-SLNs were taken up by an energy-dependent, endocytic mechanism mediated by caveolae mediated endocytosis across Caco-2 cells. The CA permeation through Caco-2 cell was facilitated by CA-SLNs. The outcome of the gastrointestinal irritation test demonstrated that CA-SLNs had no irritation to the rats' intestines. Compared with CA dispersions, incorporation of SLNs increased the oral bioavailability of CA more than 1.69-fold.

CONCLUSIONS

It was concluded that CA-SLNs improved the absorption across Caco-2 cell model and improved the oral administration bioavailability of CA in rats.

Probing the Role of Connecting Bonds and Modifying Chains in the Rational Design of Prodrug Nanoassemblies

Prodrug-based self-assembled nanoparticles combined with the merits of nanotechnology and prodrugs strategies have gradually become a research trending topic in the field of drug delivery. These prodrugs usually consist of parent drugs, connecting bonds, and modifying chains. The influences of the connecting bonds and modifying chains on the pharmaceutical characteristics, in vivo delivery fate, and antitumor activity of prodrug nanoassemblies remain elusive. Herein, three docetaxel (DTX) prodrugs were designed using sulfur bonds (thioether bond or disulfide bond) as connecting bonds and fatty alcohols (straight chain or branched chain) as modifying chains. Interestingly, the difference between connecting bonds and modifying chains deeply influenced the colloidal stability, redox responsive drug release, cytotoxicity, pharmacokinetic properties, tumor accumulation, and antitumor effect of prodrug nanoassemblies. DTX conjugated with branched chain fatty alcohols via disulfide bonds (HUA-SS-DTX) significantly improved the antitumor efficiency of DTX and reduced the systematic toxicity. Our study elaborates on the vital role of connecting bonds and modifying chains in the rational design of prodrug nanoassemblies.

Preparation, Characterization and Pharmacokinetics of Tolfenamic Acid-Loaded Solid Lipid Nanoparticles

The clinical use of nonsteroidal anti-inflammatory drugs is limited by their poor water solubility, unstable absorption, and low bioavailability. Solid lipid nanoparticles (SLNs) exhibit high biocompatibility and the ability to improve the bioavailability of drugs with low water solubility. Therefore, in this study, a tolfenamic acid solid lipid nanoparticle (TA-SLN) suspension was prepared by a hot melt–emulsification ultrasonication method to improve the sustained release and bioavailability of TA. The encapsulation efficiency (EE), loading capacity (LC), particle size, polydispersity index (PDI), and zeta potential of the TA-SLN suspension were 82.50 ± 0.63%, 25.13 ± 0.28%, 492 ± 6.51 nm, 0.309 ± 0.02 and −21.7 ± 0.51 mV, respectively. The TA-SLN suspension was characterized by dynamic light scattering (DLS), fluorescence microscopy (FM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Fourier transform infrared (FT-IR) spectroscopy. The TA-SLN suspension showed improved sustained drug release in vitro compared with the commercially available TA injection. After intramuscular administration to pigs (4 mg/kg), the TA-SLN suspension displayed increases in the pharmacokinetic parameters T_max, T_1/2, and MRT_0–∞ by 4.39-, 3.78-, and 3.78-fold, respectively, compared with TA injection, and showed a relative bioavailability of 185.33%. Thus, this prepared solid lipid nanosuspension is a promising new formulation.

Silibinin-loaded nanostructured lipid carriers (NLCs) ameliorated cognitive deficits and oxidative damages in aluminum chloride-induced neurotoxicity in male mice

Aluminum chloride (AlCl3) and its accumulation in the brain are associated with neurodegenerative disease. Recent investigations have illustrated that silibinin is known to have neuroprotective properties. The present study investigates the neuroprotective effects of silibinin-loaded nanostructured lipid carriers (Sili-NLCs) against AlCl3-induced neurotoxicity in male mice. Sili-NLCs were prepared using the emulsification-solvent evaporation method and subjected to particle size, zeta potential, and entrapment efficiency (% EE) analysis. Mice were treated with AlCl3 (100 mg/kg/day, p.o.) and with the same concentration of silibinin and Sili-NLCs (50,100, and 200 mg/kg/day, p.o.) for 30 days in different groups. After treating animals, behavioral studies were assessed. Also, the brain tissue samples were collected from all mice to evaluate oxidative damage and histological changes. The particle size, polydispersity index, zeta potential, and entrapment efficiency (% EE) of prepared Sili-NLCs found 239.7 ± 4.04 nm, 0.082 ± 0.003, - 16.33 ± 0.15 mV, and 72.65 ± 2.03 %, respectively. Brain uptake studies showed that Sili-NLCs had a 5.7-fold greater uptake in the mice brain than the free drug. The AlCl3 caused significant cognitive impairment and increased the level of lipid peroxidation accompanied by decreasing antioxidant enzyme activity in the brain tissue. These findings correlated well with the histopathological experiments. Furthermore, treatment with Sili-NLCs significantly improved the AlCl3-induced cognitive impairment, neurochemical anomalies, and histopathological changes. Given these results, silibinin, when delivered using NLCs, is potentially more effective than free silibinin in decreasing AlCl3- induced neurotoxicity.

PLGA-Based Nanoplatforms in Drug Delivery for Inhibition and Destruction of Microbial Biofilm

The biofilm community of microorganisms has been identified as the dominant mode of microbial growth in nature and a common characteristic of different microorganisms such as Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis. The biofilm structure helps in the protection from environmental threats including host immune system and antimicrobial agents. Thus, the biofilm community has led to a higher prevalence of multidrug-resistant (MDR) strains in recent years. In this regard, the use of a new class of antibiotics, natural compounds, and anti-biofilm enzymes has been considered for the destruction of the microbial biofilm. However, different drawbacks such as low penetration, high susceptibility to degradation, instability, and poor solubility in aqueous solutions limit the use of anti-biofilm agents (ABAs) in a clinical setting. As such, recent studies have been using poly lactic-co-glycolic acid (PLGA)-based nanoplatforms (PLGA NPFs) for delivery of ABAs that have reported promising results. These particles, due to proper drug loading and release kinetics, could suppress microbial attachment, colonization, and biofilm formation for a long time. Additionally, PLGA NPFs, because of the high drug-loading efficiencies, hydrophilic surface, negative charge, and electrostatic interaction, lead to effective penetration of antibiotics to the deeper layer of the biofilm, thereby eliminating the microbial biofilm. Thus, PLGA NPFs could be considered as a potential candidate for coating catheters and other medical material surfaces for inhibition and destruction of the microbial biofilm. However, the exact interaction of PLGA NPFs and the microbial biofilm should be evaluated in animal studies. Additionally, a future goal will be to develop PLGA formulations as systems that can be used for the treatment of the MDR microbial biofilm, since the exact interactions of PLGA NPFs and these biofilm structures are not elucidated. In the present review article, we have discussed various aspects of PLGA usage for inhibition and destruction of the microbial biofilm along with different methods and procedures that have been used for improving PLGA NPF efficacy against the microbial biofilm.

Synthesis and Potential Applications of Lipid Nanoparticles in Medicine

Currently, carriers of active ingredients in the form of particles of a size measured in nanometers are the focus of interest of research centers worldwide. So far, submicrometer emulsions, liposomes, as well as microspheres, and nanospheres made of biodegradable polymers have been used in medicine. Recent studies show particular interest in nanoparticles based on lipids, and at the present time, are even referred to as the "era of lipid carriers". With the passage of time, lipid nanoparticles of the so-called first and second generation, SLN (Solid Lipid Nanoparticles) and nanostructured lipid carriers and NLC (Nanostructured Lipid Carriers), respectively, turned out to be an alternative for all imperfections of earlier carriers. These carriers are characterized by a number of beneficial functional properties, including, among others, structure based on lipids well tolerated by the human body, high stability, and ability to carry hydro- and lipophilic compounds. Additionally, these carriers can enhance the distribution of the drug in the target organ and alter the pharmacokinetic properties of the drug carriers to enhance the medical effect and minimize adverse side effects. This work is focused on the current review of the state-of-the-art related to the synthesis and applications of popular nanoparticles in medicine, with a focus on their use, e.g., in COVID-19 vaccines.

Bio-interactive nanoarchitectonics with two-dimensional materials and environments

Like the proposal of nanotechnology by Richard Feynman, the nanoarchitectonics concept was initially proposed by Masakazu Aono. The nanoarchitectonics strategy conceptually fuses nanotechnology with other research fields including organic chemistry, supramolecular chemistry, micro/nanofabrication, materials science, and bio-related sciences, and aims to produce functional materials from nanoscale components. In this review article, bio-interactive nanoarchitectonics and two-dimensional materials and environments are discussed as a selected topic. The account gives general examples of nanoarchitectonics of two-dimensional materials for energy storage, catalysis, and biomedical applications, followed by explanations of bio-related applications with two-dimensional materials such as two-dimensional biomimetic nanosheets, fullerene nanosheets, and two-dimensional assemblies of one-dimensional fullerene nanowhiskers (FNWs). The discussion on bio-interactive nanoarchitectonics in two-dimensional environments further extends to liquid-liquid interfaces such as fluorocarbon-medium interfaces and viscous liquid interfaces as new frontiers of two-dimensional environments for bio-related applications. Controlling differentiation of stem cells at fluidic liquid interfaces is also discussed. Finally, a conclusive section briefly summarizes features of bio-interactive nanoarchitectonics with two-dimensional materials and environments and discusses possible future perspectives.

There is still plenty of room for layer-by-layer assembly for constructing nanoarchitectonics-based materials and devices

Nanoarchitectonics approaches can produce functional materials from tiny units through combination of various processes including atom/molecular manipulation, chemical conversion, self-assembly/self-organization, microfabrication, and bio-inspired procedures. Existing fabrication approaches can be regarded as fitting into the same concept. In particular, the so-called layer-by-layer (LbL) assembly method has huge potential for preparing applicable materials with a great variety of assembling mechanisms. LbL assembly is a multistep process where different components can be organized in planned sequences while simple alignment options provide access to superstructures, for example helical structures, and anisotropies which are important aspects of nanoarchitectonics. In this article, newly-featured examples are extracted from the literature on LbL assembly discussing trends for composite functional materials according to (i) principles and techniques, (ii) composite materials, and (iii) applications. We present our opinion on the present trends, and the prospects of LbL assembly. While this method has already reached a certain maturity, there is still plenty of room for expanding its usefulness for the fabrication of nanoarchitectonics-based materials and devices.

Experimental Study on the Resistance of Synthetic Penicillin Solid Lipid Nanoparticles to Clinically Resistant Staphylococcus aureus

Background

With the increasing resistance of antibiotics to bacteria, new and effective methods are needed to transform existing antibiotics to solve the problem of long development cycles for new drugs. The antibiotic nanodelivery system has proven to be a promising strategy.

Aim

The purpose of this study is to synthesize penicillin solid lipid nanoparticles (penicillin SLNs) to enhance the antibacterial activity of penicillin against drug-resistant Staphylococcus aureus.

Materials and Methods

Penicillin SLNs were synthesized. And particle size, the polydispersity index (PI), and zeta potential (ZP) of penicillin SLNs were measured. The surface morphology of penicillin SLNs was observed using a transmission electron microscope.

Results

The particle size of penicillin SLNs is 112.3 ± 11.9 nm, the polydispersity index (PI) and zeta potential (ZP) of penicillin SLNs are 0.212 ± 0.03 and -27.6 ± 5.5 mV. The encapsulation efficiency and drug loading were 98.31 ± 1.2% and 4.98 ± 0.05 (%w/w), respectively. Penicillin SLNs had a more significant inhibitory effect on the growth of methicillin-sensitive Staphylococcus aureus (MSSA) after the drug and the bacteria were incubated for 12 hours. The number of MRSA colonies in the penicillin group increased after 12 hours, while the number of MRSA colonies in the penicillin SLNs group did not change significantly.

Conclusion

Penicillin SLNs enhance the ability of penicillin to enter cells and increase the concentration of penicillin in the cell and also extend the residence time of penicillin in the cell. Our findings indicated that penicillin SLNs enhance the inhibitory effect of penicillin on drug-resistant Staphylococcus aureus.

Zero-to-Two Nanoarchitectonics: Fabrication of Two-Dimensional Materials from Zero-Dimensional Fullerene

Nanoarchitectonics of two-dimensional materials from zero-dimensional fullerenes is mainly introduced in this short review. Fullerenes are simple objects with mono-elemental (carbon) composition and zero-dimensional structure. However, fullerenes and their derivatives can create various types of two-dimensional materials. The exemplified approaches demonstrated fabrications of various two-dimensional materials including size-tunable hexagonal fullerene nanosheet, two-dimensional fullerene nano-mesh, van der Waals two-dimensional fullerene solid, fullerene/ferrocene hybrid hexagonal nanosheet, fullerene/cobalt porphyrin hybrid nanosheet, two-dimensional fullerene array in the supramolecular template, two-dimensional van der Waals supramolecular framework, supramolecular fullerene liquid crystal, frustrated layered self-assembly from two-dimensional nanosheet, and hierarchical zero-to-one-to-two dimensional fullerene assembly for cell culture.

Challenges in Oral Drug Delivery and Applications of Lipid Nanoparticles as Potent Oral Drug Carriers for Managing Cardiovascular Risk Factors

BACKGROUND

The oral application of drugs is the most popular route through which the systemic effect can be achieved. Nevertheless, oral administration is limited by difficulties related to the physicochemical properties of the drug molecule, including low aqueous solubility, instability, low permeability, and rapid metabolism, all of which result in low and irregular oral bioavailability.

OBJECTIVE

The enhancement of oral bioavailability of drug molecules with such properties could lead to extreme complications in drug preparations. Oral lipid-based nanoparticles seem to possess extensive advantages due to their ability to increase the solubility, simplifying intestinal absorption and decrease or eradicate the effect of food on the absorption of low soluble, lipophilic drugs and therefore improving the oral bioavailability.

METHODS

The present review provides a summary of the general theory of lipid-based nanoparticles, their preparation methods, as well as their oral applications. Moreover, oral drug delivery challenges are discussed.

RESULTS

According to this review, the most frequent types of lipid-based nanoparticle, the solid lipid nanoparticles and nanostructured lipid carriers are potent oral carriers due to their ability to penetrate the oral drug adsorption barriers. Moreover, such lipid nanoparticles can be beneficial drug carriers against cardiovascular risk disorders as diabetes, hypertension, etc. Conclusion: In this review, the most current and promising studies involving Solid Lipid Nanoparticles and Nanostructured Lipid Carriers as oral drug carriers are reported aiming to assist researchers who focus their research on lipid-based nanoparticles.

Nanoparticles: A Hope for the Treatment of Inflammation in CNS

Neuroinflammation, an inflammatory response within the central nervous system (CNS), is a main hallmark of common neurodegenerative diseases, including Alzheimer’s disease (AD), Parkinson’s disease (PD), and amyotrophic lateral sclerosis (ALS), among others. The over-activated microglia release pro-inflammatory cytokines, which induces neuronal death and accelerates neurodegeneration. Therefore, inhibition of microglia over-activation and microglia-mediated neuroinflammation has been a promising strategy for the treatment of neurodegenerative diseases. Many drugs have shown promising therapeutic effects on microglia and inflammation. However, the blood–brain barrier (BBB)—a natural barrier preventing brain tissue from contact with harmful plasma components—seriously hinders drug delivery to the microglial cells in CNS. As an emerging useful therapeutic tool in CNS-related diseases, nanoparticles (NPs) have been widely applied in biomedical fields for use in diagnosis, biosensing and drug delivery. Recently, many NPs have been reported to be useful vehicles for anti-inflammatory drugs across the BBB to inhibit the over-activation of microglia and neuroinflammation. Therefore, NPs with good biodegradability and biocompatibility have the potential to be developed as an effective and minimally invasive carrier to help other drugs cross the BBB or as a therapeutic agent for the treatment of neuroinflammation-mediated neurodegenerative diseases. In this review, we summarized various nanoparticles applied in CNS, and their mechanisms and effects in the modulation of inflammation responses in neurodegenerative diseases, providing insights and suggestions for the use of NPs in the treatment of neuroinflammation-related neurodegenerative diseases.

Exploiting drug delivery systems for oral route in the peptic ulcer disease treatment

Peptic ulcer disease (PUD) is a common condition that is induced by acid and pepsin causing lesions in the mucosa of the duodenum and stomach. The pathogenesis of PUD is a many-sided scenario, which involves an imbalance between protective factors, such as prostaglandins, blood flow, and cell renewal, and aggressive ones, like alcohol abuse, smoking, Helicobacter pylori colonisation, and the use of non-steroidal anti-inflammatory drugs. The standard oral treatment is well established; however, several problems can decrease the success of this therapy, such as drug degradation in the gastric environment, low oral bioavailability, and lack of vectorisation to the target site. In this way, the use of strategies to improve the effectiveness of these conventional drugs becomes interesting. Currently, the use of drug delivery systems is being explored as an option to improve the drug therapy limitations, such as antimicrobial resistance, low bioavailability, molecule degradation in an acid environment, and low concentration of the drug at the site of action. This article provides a review of oral drug delivery systems looking for improving the treatment of PUD.

Progress in Molecular Nanoarchitectonics and Materials Nanoarchitectonics

Although various synthetic methodologies including organic synthesis, polymer chemistry, and materials science are the main contributors to the production of functional materials, the importance of regulation of nanoscale structures for better performance has become clear with recent science and technology developments. Therefore, a new research paradigm to produce functional material systems from nanoscale units has to be created as an advancement of nanoscale science. This task is assigned to an emerging concept, nanoarchitectonics, which aims to produce functional materials and functional structures from nanoscale unit components. This can be done through combining nanotechnology with the other research fields such as organic chemistry, supramolecular chemistry, materials science, and bio-related science. In this review article, the basic-level of nanoarchitectonics is first presented with atom/molecular-level structure formations and conversions from molecular units to functional materials. Then, two typical application-oriented nanoarchitectonics efforts in energy-oriented applications and bio-related applications are discussed. Finally, future directions of the molecular and materials nanoarchitectonics concepts for advancement of functional nanomaterials are briefly discussed.

Nanostructured lipid carriers as a strategy for encapsulation of active plant constituents: Formulation and in vitro physicochemical characterizations

Active plant constituents obtained from edible sources have manifested their pharmacological potential as a therapy against several diseases. But the lack of their desired physicochemical properties such as solubility, permeability ultimately leads to poor bioavailability. Two potent active plant constituents namely, quercetin and piperine having a problem with either solubility or permeability or both, and hence require an advanced lipid-mediated separate formulation system to improve their aforementioned concerns. Concerning advancement in nanoformulations, lipid-based nano-carriers systems have created their mark as a novel drug delivery system. Therefore, an advanced formulation like nanostructured lipid carriers (NLCs) has been formulated individually for both the active plant constituents/drugs through the solvent evaporation technique using high shear homogenization method followed by sonication. Compritol® 888 ATO, a solid lipid, and squalene as liquid lipid was used in their optimized ratios to formulate individual NLCs. Blank and individual drugs loaded NLCs were further characterized for their in vitro physicochemical properties. NLCs showed a negative surface charge with an average particle size below 200 nm. Electron microscopy images showed an anomalous structure of both the formulated NLCs with higher % drug encapsulation efficiency (DEE) with the desired in vitro drug release profile. In the case of quercetin-NLCs, 93.18 ± 5.5 % DEE was observed followed by drug release up to 45.0 ± 1.3 % within 12 h, while piperine-NLCs showed 91.80 ± 2.51 % DEE and drug release up to 38 ± 5.2 % at the same time. XRD and DSC plots showed the conversion of both the drugs into an amorphous structure encapsulated in a lyophilized NLCs matrix. Finally, the safety profile for formulated NLCs was confirmed by haemolysis assay. Hence, the developed active plant constituents enriched NLCs can further be delivered separately and/or in combination, and also may further be evaluated both in vitro and in vivo means.

Effect of excipients on oral absorption process according to the different gastrointestinal segments

INTRODUCTION

Excipients are necessary to develop oral dosage forms of any Active Pharmaceutical Ingredient (API). Traditionally, excipients have been considered inactive and inert substances, but, over the years, numerous studies have contradicted this belief. This review focuses on the effect of excipients on the physiological variables affecting oral absorption along the different segments of the gastrointestinal tract. The effect of excipients on the segmental absorption variables are illustrated with examples to help understand the complexity of predicting their in vivo effects.

AREAS COVERED

The effects of excipients on disintegration, solubility and dissolution, transit time, and absorption are analyzed in the context of the different gastrointestinal segments and the physiological factors affecting release and membrane permeation. The experimental techniques used to study excipient effects and their human predictive ability are reviewed.

EXPERT OPINION

The observed effects of excipient in oral absorption process have been characterized in the past, mainly in vitro (i.e. in dissolution studies, in vitro cell culture methods or in situ animal studies). Unfortunately, a clear link with their effects in vivo, i.e. their impact on Cmax or AUC, which need a mechanistic approach is still missing. The information compiled in this review leads to the conclusion that the effect of excipients in API oral absorption and bioavailability is undeniable and shows the need of implementing standardized and reproducible preclinical tools coupled with mechanistic and predictive physiological-based models to improve the current empirical retrospective approach.

Synthesis, Characterizations, and Use of O-Stearoyl Mannose Ligand-Engineered Lipid Nanoarchitectonics for Alveolar Macrophage Targeting

The main challenging aspect in the management of tuberculosis (TB) diseases is effective alveolar macrophages targeting. Macrophage mannose receptor plays a predominant role in stimulating immune systems by TB pathogen. Our earlier in silico computational studies revealed that O-stearoyl mannose (OSM) possesses a higher affinity with macrophage mannose receptors. Therefore, keeping this in view, we developed OSM with the association of stearic acid and d-mannose as initial reactants by the esterification process. Preliminary confirmation of reaction was assessed with thin-layer chromatography experimentation, whereas further confirmation followed by in vitro characterization with several analytical experimental tools such as fourier transform near-infrared, differential scanning calorimetry, and electrospray ionization-assisted mass spectrometry confirms the formation of the OSM. This synthesized and well-characterized OSM as a ligand was further incubated with surface-engineered lipid nanoarchitectonics to achieve OSM ligand-engineered lipid nanoarchitectonics and earlier explored for its safety study through hemolysis assay and potential in vitro triggering efficiency in human alveolar macrophages (THP-1 cells) to validate its active targeting efficiency. Graphical Abstract [Figure: see text].

Nanoarchitectonics beyond Self-Assembly: Challenges to Create Bio-Like Hierarchic Organization

Incorporation of non-equilibrium actions in the sequence of self-assembly processes would be an effective means to establish bio-like high functionality hierarchical assemblies. As a novel methodology beyond self-assembly, nanoarchitectonics, which has as its aim the fabrication of functional materials systems from nanoscopic units through the methodological fusion of nanotechnology with other scientific disciplines including organic synthesis, supramolecular chemistry, microfabrication, and bio-process, has been applied to this strategy. The application of non-equilibrium factors to conventional self-assembly processes is discussed on the basis of examples of directed assembly, Langmuir-Blodgett assembly, and layer-by-layer assembly. In particular, examples of the fabrication of hierarchical functional structures using bio-active components such as proteins or by the combination of bio-components and two-dimensional nanomaterials, are described. Methodologies described in this review article highlight possible approaches using the nanoarchitectonics concept beyond self-assembly for creation of bio-like higher functionalities and hierarchical structural organization.

Lipid-Based Gliclazide Nanoparticles for Treatment of Diabetes: Formulation, Pharmacokinetics, Pharmacodynamics and Subacute Toxicity Study

Introduction

Solid lipid nanoparticles (SLNs) are considered a promising system in enhancing the oral bioavailability of poorly water-soluble drugs; owing to their intrinsic ability to increase the solubility together with protecting the incorporated drugs from extensive metabolism.

Objective

Exploiting such properties, SLNs loaded with gliclazide (GLZ) were developed in an attempt to improve the oral bioavailability and the anti-diabetic action of GLZ, together with prolonging its duration of action for better glycemic control.

Methods

SLNs were prepared by ultra-sonication technique using glyceryl behenate (Compritol^®888 ATO) as a lipid matrix and poloxamer 188 (PLX) as a stabilizer. A 2*3 asymmetrical factorial design was adopted to study the effect of different stabilizer concentrations at different sonication times on the shape, and size of the particles, PDI and drug loading. The selected optimum formulation was then freeze dried using trehalose di-hydrate as a cryo-protectant in different ratios with respect to glyceryl behenate concentration. After freeze drying, the formulation was tested for in-vitro drug release, pharmacokinetics, and pharmacodynamics. Safety of the selected formula was established after carrying out a subacute toxicity study.

Results

The factorial design experiment resulted in an optimum formulation coded 10F2 (150 mg PLX/10 min sonication). Scanning electron micrographs showed spherical particles with smooth surface, whereas a ratio of 2:1 cryo-protectant:lipid was found to be optimum with particle size of 245.9 ± 26.2 nm, polydispersity index of 0.482 ± 0.026, and biphasic in-vitro release with an initial burst effect, followed by a prolonged release phase. On the other hand, the selected SLNs exhibited prolonged drug release when compared with the GLZ commercial immediate release (IR) tablets (Diamicron^®). Pharmacokinetics study showed about 5-fold increase in GLZ oral bioavailability loaded in SLNs when compared with raw GLZ powder. Pharmacodynamics study on a diabetic rat model confirmed the better anti-diabetic action of GLZ loaded SLNs when compared to raw GLZ powder. Subacute toxicity study indicated the safety of SLNs upon repetitive oral administration.

Emergence in protein derived nanomedicine as anticancer therapeutics: More than a tour de force

Cancer has thwarted as a major health problem affecting the global population. With an alarming increase in the patient population suffering from diverse varieties of cancers, the global demographic data predicts sharp escalation in the number of cancer patients. This can be expected to reach 420 million cases by 2025. Among the diverse types of cancers, the most frequently diagnosed cancers are the breast, colorectal, prostate and lung cancer. From years, conventional treatment approaches like surgery, chemotherapy and radiation therapy have been practiced. In the past few years, increasing research on molecular level diagnosis and treatment of cancers have significantly changed the realm of cancer treatment. Lately, uses of advanced chemotherapy and immunotherapy like treatments have gained significant progress in the cancer therapy, but these approaches have several limitations on their safety and toxicity. This has generated lot of momentum for the evolution of new drug delivery approaches for the effective delivery of anticancer therapeutics, which may improve the pharmacokinetic and pharmacodynamic effect of the drugs along with significant reduction in the side effects. In this regard, the protein-based nano-medicines have gained wider attention in the management of cancer. Proteins are organic macromolecules essential, for life and have quite well explored in developing the nano-carriers. Furthermore, it provides passive or active tumour cell targeted delivery, by using protein based nanovesicles or virus like structures, antibody drug conjugates, viral particles, etc. Moreover, by utilizing various formulation strategies, both the animal and plant derived proteins can be converted to produce self-assembled virus like nano-metric structures with high efficiency in targeting the metastatic cancer cells. Therefore, the present review extensively discusses the applications of protein-based nano-medicine with special emphasis on intracellular delivery/drug targeting ability for anticancer drugs.

Investigation of Potential Amorphisation and Co-Amorphisation Behaviour of the Benzene Di-Carboxylic Acids upon Cryo-Milling

Multi-component formulations offer a way to modulate the physico-chemical properties of drug molecules and thereby enhance their efficacy as medicines compared to using only the raw drug, with mechano-chemical synthesis being an increasingly popular way to create these novel materials in a research setting. However, to date studies have focussed on employing pharmaceutically acceptable components, which has led to the literature featuring chemically diverse pairings of drug and excipient. Here we investigate the outcome of cryo-milling and co-cryo-milling of a series of three simple geometrical isomers of benzene di-carboxylic acid with a view to developing a chemically simple model system to investigate areas including cryo-milling, co-cryo-milling, co-amorphous formulation, etc. All three single-component materials exhibit differing behaviour upon cryo-milling and subsequent storage, as do the two-component mixtures. The surprisingly differing behaviours of these chemically similar species upon cryo-milling and co-cryo-milling suggest that molecular chemistry may not be the dominant influence on the outcome of mechano-chemical syntheses, and that other properties should be explored to develop a predictive model for the outcomes of these types of reactions.