An overview of surgical sealant devices: current approaches and future trends

Cellulose fibres enhance the function of hemostatic composite medical sealants

Tissue adhesives and sealants offer promising alternatives to traditional wound closure methods, but the existing trade-off between biocompatibility and strength is still a challenge. The current study explores the potential of a gelatin-alginate-based hydrogel, cross-linked with a carbodiimide, and loaded with two functional fillers, the hemostatic agent kaolin and cellulose fibres, to improve the hydrogel's mechanical strength and hemostatic properties for use as a sealant. The effect of the formulation parameters on the mechanical and physical properties was studied, as well as the biocompatibility and microstructure. The incorporation of the two functional fillers resulted in a dual micro-composite structure, with uniform dispersion of both fillers within the hydrogel, and excellent adhesion between the fillers and the hydrogel matrix. This enabled to strongly increase the sealing ability and the tensile strength and modulus of the hydrogel. The fibres' contribution to the enhanced mechanical properties is more dominant than that of kaolin. A combined synergistic effect of both fillers resulted in enhanced sealing ability (247%), tensile strength (400%), and Young's modulus (437%), compared to the unloaded hydrogel formulation. While the incorporation of kaolin almost did not affect the physical properties of the hydrogel, the incorporation of the fibres strongly increased the viscosity and decreased the gelation time and swelling degree. The cytotoxicity tests indicated that all studied formulations exhibited high cell viability. Hence, the studied new dual micro-composite hydrogels may be suitable for medical sealing applications, especially when it is needed to get a high sealing effect within a short time. The desired hemostatic effect is obtained due to kaolin incorporation without affecting the physical properties of the sealant. Understanding the effects of the formulation parameters on the hydrogel's properties enables the fitting of optimal formulations for various medical sealing applications.

Biochemical and biomechanical characterization of an autologous protein-based fibrin sealant for regenerative medicine

Accidental events or surgical procedures usually lead to tissue injury. Fibrin sealants have proven to optimize the healing process but have some drawbacks due to their allogeneic nature. Autologous fibrin sealants present several advantages. The aim of this study is to evaluate the performance of a new autologous fibrin sealant based on Endoret®PRGF® technology (E-sealant). One of the most widely used commercial fibrin sealants (Tisseel®) was included as comparative Control. E-sealant´s hematological and biological properties were characterized. The coagulation kinetics and the microstructure were compared. Their rheological profile and biomechanical behavior were also recorded. Finally, the swelling/shrinkage capacity and the enzymatic degradation of adhesives were determined. E-sealant presented a moderate platelet concentration and physiological levels of fibrinogen and thrombin. It clotted 30 s after activation. The microstructure of E-sealant showed a homogeneous fibrillar scaffold with numerous and scattered platelet aggregates. In contrast, Control presented absence of blood cells and amorphous protein deposits. Although in different order of magnitude, both adhesives had similar rheological profiles and viscoelasticity. Control showed a higher hardness but both adhesives presented a pseudoplastic hydrogel nature with a shear thinning behavior. Regarding their adhesiveness, E-sealant presented a higher tensile strength before cohesive failure but their elastic stretching capacity and maximum elongation was similar. While E-sealant presented a significant shrinkage process, Control showed a slight swelling over time. In addition, E-sealant presented a high enzymatic resorption rate, while Control showed to withstand the biodegradation process in a significant way. E-sealant presents optimal biochemical and biomechanical properties suitable for its use as a fibrin sealant with regenerative purposes.

Sea squirt-inspired bio-derived tissue sealants

Sea squirts' or tunicates' bodies are composed of cellulose nanofibers and gallol- functionalized proteins. These sea creatures are known to heal their injuries under seawater by forming crosslinks between gallols and functional groups from other proteins in their bodies. Inspired by their wound healing mechanism, herein, we have developed a tissue sealant using zein (a plant-based protein) and tannic acid (gallol-containing polyphenol). Except for fibrin- based sealants, most commercial surgical adhesives, and sealants available today are derived from petroleum products that compromise their biodegradability. They often have complicated and multi-step synthesis processes that ultimately affect their affordability. To overcome this challenge, we ensured that these sea squirt-inspired tissue sealants are bio-based, easily synthesized, and low-cost. The sealants were studied on their own and with a food-grade enzyme transglutaminase. The adhesion performances of the sealants were found to be higher than physiological pressures in seven out of nine different tissue substrates studied here. Their performance was also better than or on par with the FDA-approved fibrin sealant Tisseel. Ex vivo models demonstrate instant sealing of leaking wounds in less than a minute. The sealants were not only cytocompatible but also showed complete wound healing on par with sutures and Tisseel when applied in vivo on skin incisions in rats. Overall, these sea squirt-inspired bio-based sealants show great potential to replace currently available wound closure methods.

Fermentation-Derived Albumin-Based Hydrogels for Tissue Adhesion Applications

Currently, most of the clinically available surgical glues and sealants lack elasticity, good adhesion and biocompatibility properties. Hydrogels as tissue adhesives have received extensive attention for their tissue-mimicking features. Here, a novel surgical glue hydrogel based on a fermentation-derived human albumin (rAlb) and biocompatible crosslinker for tissue-sealant applications has been developed. In order to reduce the risks of viral transmission diseases and an immune response, Animal-Free Recombinant Human Albumin from the saccharomyces yeast strain was used. A more biocompatible crosslinking agent, 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC), was used and compared with glutaraldehyde (GA). The design of crosslinked albumin-based adhesive gels was optimized by varying the albumin concentration, the mass ratio between albumin and the crosslinking agent as well as the crosslinker type. Tissue sealants were characterized in terms of mechanical (tensile and shear), adhesive and in vitro biocompatibility properties. The results indicated that the mechanical and adhesive properties improved as the albumin concentration increased and the mass ratio between albumin and crosslinker decreased. Moreover, the EDC-crosslinked albumin gels have better biocompatibility properties than GA-crosslinked glues.

A comparative high-resolution physicochemical analysis of commercially available fibrin sealants: Impact of sealant osmolality on biological performance

Fibrin sealants are well-established components of the surgical toolbox, especially in procedures that harbor a high risk of perioperative bleeding. Their widespread use as hemostats, sealants or tissue-adhesives in various surgical settings has shown that the choice of the appropriate sealant system affects the clinical outcome. While many studies have compared the hemostatic efficiency of fibrin sealants to that of other natural or synthetic sealants, there is still limited data on how subtle differences in fibrin sealant formulations relate to their biological performance. Here, we performed an in-depth physicochemical and biological characterization of the two most commonly used fibrin sealants in the US and Europe: TISSEEL™ ("FS") and VISTASEAL™/VERASEAL™ ("FS+Osm"). Our chemical analyses demonstrated differences between the two sealants, with lower fibrinogen concentrations and supraphysiological osmolality in the FS+Osm formulation. Rheological testing revealed FS clots have greater clot stiffness, which strongly correlated with network density. Ultrastructural analysis by scanning electron microscopy revealed differences between FS and FS+Osm fibrin networks, the latter characterized by a largely amorphous hydrogel structure in contrast to the physiological fibrillar network of FS. Cytocompatibility experiments with human fibroblasts seeded on FS and FS+Osm fibrin networks, or cultured in presence of sealant extracts, revealed that FS+Osm induced apoptosis, which was not observed with FS. Although differential sealant osmolality and amounts of fibrinogen, as well as the presence of Factor XIII or additives such as antifibrinolytics, may explain the mechanical and structural differences observed between the two fibrin sealants, none of these substances are known to cause apoptosis at the respective concentrations in the sealant formulation. We thus conclude that hyper osmolality in the FS+Osm formulation is the primary trigger of apoptosis-a mechanism that should be evaluated in more detail, as it may affect the cellular wound healing response in situ.

Advances in biomaterials as a retinal patch for the repair of rhegmatogenous retinal detachment

Rhegmatogenous retinal detachment (RRD) is the most common retinological emergency that can cause blindness without surgical treatment. RRD occurs when liquefied vitreous accumulates between the neurosensory retina and the retinal pigment epithelium via retinal breaks, which are caused by the separation of the vitreous from the retina with aging. Currently, the main treatment option is pars plana vitrectomy, which involves surgical removal of the vitreous and laser photocoagulation around retinal breaks to generate firm chorioretinal adhesion, as well as subsequent filling of the vitreous cavity with long-lasting substitutes (expansile gas or silocone oil) to prevent the connection between the subretinal space and the vitreous cavity via the breaks before the chorioretinal adhesion firm enough. However, the postoperative face-down position and the not very satisfactory first retinal reattachment rate place a heavy burden on patients. With the development of technology and materials engineering, researchers have developed biomaterials that can be used as a retinal patch to seal retinal breaks and prevent the connection of subretinal space and vitreous cavity via breaks, thus replacing the long-lasting vitreous substitutes and eliminating the postoperative face-down position. Preclinical studies have demonstrated that biomaterial sealants have enough biocompatibility and efficacy in the in vitro and in vivo experiments. Some sealants have been used in clinical trials on a small scale, and the results indicate promising application prospects of the biomaterial sealants as retinal patches in the repair of RRD. Herein, we review the recent advances in biomaterials as retinal patches for the repair of RRD, focusing on the biomaterial categories, methods, and procedures for sealing retinal breaks, as well as their biocompatibility and efficacy, current limitations, and development perspectives.

A forgotten element of the blue economy: marine biomimetics and inspiration from the deep sea

The morphology, physiology, and behavior of marine organisms have been a valuable source of inspiration for solving conceptual and design problems. Here, we introduce this rich and rapidly expanding field of marine biomimetics, and identify it as a poorly articulated and often overlooked element of the ocean economy associated with substantial monetary benefits. We showcase innovations across seven broad categories of marine biomimetic design (adhesion, antifouling, armor, buoyancy, movement, sensory, stealth), and use this framing as context for a closer consideration of the increasingly frequent focus on deep-sea life as an inspiration for biomimetic design. We contend that marine biomimetics is not only a "forgotten" sector of the ocean economy, but has the potential to drive appreciation of nonmonetary values, conservation, and stewardship, making it well-aligned with notions of a sustainable blue economy. We note, however, that the highest ambitions for a blue economy are that it not only drives sustainability, but also greater equity and inclusivity, and conclude by articulating challenges and considerations for bringing marine biomimetics onto this trajectory.

The Current Challenges on Spray-Based Cell Delivery to the Skin Wounds

Cell delivery through spray instruments is a promising and effective method in tissue engineering and regenerative medicine. It is used for treating different acute and chronic wounds, including burns with different etiologies, chronic diabetic or venous wounds, postcancer surgery, and hypopigmentation disorders. Cell spray can decrease the needed donor site area compared with conventional autologous skin grafting. Keratinocytes, fibroblasts, melanocytes, and mesenchymal stem cells are promising cell sources for cell spray procedures. Different spray instruments are designed and utilized to deliver the cells to the intended skin area. In an efficient spray instrument, cell viability and wound coverage are two determining parameters influenced by various physical and biological factors such as air pressure, spraying distance, viscosity of suspension, stiffness of the wound surface, and velocity of impact. Besides, to improve cell delivery by spray instruments, some matrices and growth factors can be added to cell suspensions. This review focuses on the different types of cells and spray instruments used in cell delivery procedures. It also discusses physical and biological parameters associated with cell viability and wound coverage in spray instruments. Moreover, the recent advances in codelivery of cells with biological glues and growth factors, as well as clinical translation of cell spraying, have been reviewed. Impact statement Skin wounds are a group of prevalent injuries that can lead to life-threatening complexities. As a focus of interest, stem cell therapy and spray-based cell delivery have effectively decreased associated morbidity and mortality. This review summarizes a broad scope of recent evidence related to spray-based cell therapy, instruments, and approaches adopted to make the process more efficient in treating skin wounds. An overview including utilized cell types, clinical cases, and current challenges is also provided.

Polymeric Tissue Adhesives

Polymeric tissue adhesives provide versatile materials for wound management and are widely used in a variety of medical settings ranging from minor to life-threatening tissue injuries. Compared to the traditional methods of wound closure (i.e., suturing and stapling), they are relatively easy to use, enable rapid application, and introduce minimal tissue damage. Furthermore, they can act as hemostats to control bleeding and provide a tissue-healing environment at the wound site. Despite their numerous current applications, tissue adhesives still face several limitations and unresolved challenges (e.g., weak adhesion strength and poor mechanical properties) that limit their use, leaving ample room for future improvements. Successful development of next-generation adhesives will likely require a holistic understanding of the chemical and physical properties of the tissue-adhesive interface, fundamental mechanisms of tissue adhesion, and requirements for specific clinical applications. In this review, we discuss a set of rational guidelines for design of adhesives, recent progress in the field along with examples of commercially available adhesives and those under development, tissue-specific considerations, and finally potential functions for future adhesives. Advances in tissue adhesives will open new avenues for wound care and potentially provide potent therapeutics for various medical applications.

Tissue factor-loaded collagen/alginate hydrogel beads as a hemostatic agent

Uncontrolled hemorrhage accounts for a significant proportion of annual mortality worldwide. The development of bioinspired hemostatic composites can effectively reduce hemorrhage and related deaths. This work aims to develop an efficient hemostatic agent by incorporating tissue factor (TF) integrated liposomes and collagen, which are capable of augmenting different inherent hemostatic mechanisms, into hemostasis-stimulating alginate matrix. The composite of TF, collagen and alginate (TCA) was made into hydrogel beads with a diameter range of 2.5-3.5 mm, followed by electron microscopy, infrared spectroscopy, rheological, and swelling characterization to confirm its composition and hydrogel nature. When the TCA beads were introduced into simulated body fluid, a controlled release of the loaded TF-liposomes was observed, which also accelerated with the increase of temperature, obtaining intact free proteoliposomes as demonstrated by fluorescence measurement. It is further seen that TCA beads induced the coagulation of whole rabbit blood in about 4.5 min, as compared to ~14.4 min for the control with only recalcified blood. The lipidated TF, collagen and alginate in TCA beads showed a positive synergistic effect on coagulation, while among them a decreasing procoagulant effect was observed. Finally, we demonstrated by a live/dead cell assay that TCA particles had undetectable cytotoxicity. Thus, the TCA hydrogel macrobeads may offer a potential platform for the development of potent hemostatic agents.

Bioadhesives for musculoskeletal tissue regeneration

Natural or synthetic materials designed to adhere to biological components, bioadhesives, have received significant attention in clinics and surgeries. As a result, there are several commercially available, FDA-approved bioadhesives used for skin wound closure, hemostasis, and sealing tissue gaps or cracks in soft tissues. Recently, the application of bioadhesives has been expanded to various areas including musculoskeletal tissue engineering and regenerative medicine. The instant establishment of a strong adhesion force on tissue surfaces has shown potential to augment repair of connective tissues. Bioadhesives have also been applied to secure tissue grafts to host bodies and to fill or seal gaps in musculoskeletal tissues caused by injuries or degenerative diseases. In addition, the injectability equipped with the instant adhesion formation may provide the great potential of bioadhesives as vehicles for localized delivery of cells, growth factors, and small molecules to facilitate tissue healing and regeneration. This review covers recent research progress in bioadhesives as focused on their applications in musculoskeletal tissue repair and regeneration. We also discuss the advantages and outstanding challenges of bioadhesives, as well as the future perspective toward regeneration of connective tissues with high mechanical demand.

NanoPADs and nanoFACEs: an optically transparent nanopaper-based device for biomedical applications

Paper has been a popular material of choice for biomedical applications including for bioanalysis and cell biology studies. Regular cellulose paper-based devices, however, have several key limitations including slow fluid flow; large sample retention in the paper matrix for microfluidic paper-based analytical device (μPAD) application; serious solvent evaporation issues, and contamination and poor control of experimental conditions for cell culture. Here, we describe the development of two novel platforms, nanopaper-based analytical devices (nanoPADs) and nanofibrillated adherent cell-culture platforms (nanoFACEs), that use nanofibrillated cellulose (NFC) paper, simply called nanopaper, as the substrate material to create transparent, pump-free and hollow-channel paper-based microfluidic devices. Due to the natural hydrophilicity and nanoscale pore size of nanopaper, the hollow-channel microfluidic devices can realize a totally pump-free flow without any complicated surface chemical functionalization on the nanopaper. Experimental results showed that within a certain range, larger hollow channel size leads to faster pump-free flows. Different from previous designs of paper-based hollow-channel microfluidic devices, the high transparency of the nanopaper substrate enabled the integration of various optical sensing and imaging technologies together with the nanoPADs and nanoFACEs. As proof-of-concept demonstrations, we demonstrated the use of nanoPADs for colorimetric sensing of glucose and surface-enhanced Raman spectroscopy (SERS)-based detection of environmental pollutants and applied the nanoFACEs to the culture of human umbilical vein endothelial cells (HUVECs). These demonstrations show the great promise of nanoPADs and nanoFACEs for biomedical applications such as chemical/bioanalysis and cell biology studies.

Pressure-Sensitive Tissue Adhesion and Biodegradation of Viscoelastic Polymer Blends

Viscoelastic blends of biodegradable polyesters with low and high molecular weight distributions have remarkably strong adhesion (significantly greater than 1 N/cm2) to soft, wet tissue. Those that transition from viscous flow to elastic, solidlike behavior at approximately 1 Hz demonstrate pressure-sensitivity yet also have sufficient elasticity for durable bonding to soft, wet tissue. The pressure-sensitive tissue adhesive (PSTA) blends produce increasingly stronger pull-apart adhesion in response to compressive pressure application, from 10 to 300 s. By incorporating a stiffer high molecular weight component, the PSTA exhibits dramatically improved burst pressure (greater than 100 kPa) when used as a tissue sealant. The PSTA's biodegradation mechanism can be switched from erosion (occurring primarily over the first 10 days) to bulk chemical degradation (and minimal erosion) depending on the chemistry of the high molecular weight component. Interestingly, fibrosis toward the PSTA is reduced when fast-occurring erosion is the dominant biodegradation mechanism.

Cyanacrylate Glue Caused Extrinsic Compression of an Infrapopliteal Vein Graft

Several surgical sealant devices are commercially available after their rigorous clinical testing with no apparent complications reported so far in the current literature. Cyanoacrylate glue can be used to stabilize the anastomoses and permit a better tensile strength in cardiovascular surgery. We first report the case of a 71-year-old male patient presenting with symptoms of progressive limitation of walking distance, 13 months after a successful femoroinfrapopliteal bypass surgery, because of a calcified tissue extrinsically stenosizing the first segment of the previous bypass graft, caused by the use of cyanoacrylate glue.