Validation of the procedure for the simultaneous determination of aflatoxins ochratoxin A and zearalenone in cereals using HPLC-FLD

Fusarium mycotoxins: The major food contaminants

Mycotoxins, which are secondary metabolites produced by toxicogenic fungi, are natural food toxins that cause acute and chronic adverse reactions in humans and animals. The genus Fusarium is one of three major genera of mycotoxin-producing fungi. Trichothecenes, fumonisins, and zearalenone are the major Fusarium mycotoxins that occur worldwide. Fusarium mycotoxins have the potential to infiltrate the human food chain via contamination during crop production and food processing, eventually threatening human health. The occurrence and development of Fusarium mycotoxin contamination will change with climate change, especially with variations in temperature, precipitation, and carbon dioxide concentration. To address these challenges, researchers have built a series of effective models to forecast the occurrence of Fusarium mycotoxins and provide guidance for crop production. Fusarium mycotoxins frequently exist in food products at extremely low levels, thus necessitating the development of highly sensitive and reliable detection techniques. Numerous successful detection methods have been developed to meet the requirements of various situations, and an increasing number of methods are moving toward high-throughput features. Although Fusarium mycotoxins cannot be completely eliminated, numerous agronomic, chemical, physical, and biological methods can lower Fusarium mycotoxin contamination to safe levels during the preharvest and postharvest stages. These theoretical innovations and technological advances have the potential to facilitate the development of comprehensive strategies for effectively managing Fusarium mycotoxin contamination in the future.

Fast, portable, selective, and ratiometric determination of ochratoxin A (OTA) by a fluorescent supramolecular sensor

Ochratoxin A (OTA), a mycotoxin found in various food items, possesses significant health risks due to its carcinogenic and toxic properties. Thus, detecting OTA is crucial to ensure food safety. Among the reported analytical methods, there has yet to be one that achieves fast, selective, and portable detection of OTA. In this study, we explore a novel supramolecular sensor, DOCE@ALB, utilizing human serum albumin as the host and a flavonoid fluorescent indicator as the guest. On the basis of indicator displacement assay, this sensor boasts an ultra-fast response time of just 5 s, high sensitivity with a limit of detection at 0.39 ppb, exceptional selectivity, and a noticeable ratiometric fluorescence response to OTA. This discernible color change and portability of the sensor make it suitable for on-site OTA detection in real food samples, including flour, beer, and wine, simply using a smartphone. In comparison to previously reported methods, our approach has showcased notable advantages in both response time and portability, addressing a critical need for food safety and regulatory compliance.

A Novel Lateral Flow Immunochromatographic Assay for Rapid and Simultaneous Detection of Aflatoxin B1 and Zearalenone in Food and Feed Samples Based on Highly Sensitive and Specific Monoclonal Antibodies

Simultaneous aflatoxin (AFB1) and zearalenone (ZEN) contamination in agro-products have become widespread globally and have a toxic superposition effect. In the present study, we describe a highly sensitive and specific dual lateral flow immunochromatographic assay (dual test strip) for rapid and simultaneous detection of AFB1 and ZEN in food and feed samples based on respective monoclonal antibodies (mAbs). Two immunogens AFB1-BSA (an AFB1 and bovine serum albumin (BSA) conjugate) and ZEN-BSA (a ZEN and BSA conjugate) were synthesized in oximation active ester (OAE) and amino glutaraldehyde (AGA). The molecular binding ratio of AFB1:BSA was 8.64:1, and that of ZEN:BSA was 17.2:1, identified by high-resolution mass spectrometry (HRMS) and an ultraviolet spectrometer (UV). The hybridoma cell lines 2A11, 2F6, and 3G2 for AFB1 and 2B6, 4D9 for ZEN were filtered by an indirect non-competitive enzyme-linked immunosorbent assay (inELISA) and an indirect competitive enzyme-linked immunosorbent assay (icELISA), respectively. As AFB1 mAb 2A11 and ZEN mAb 2B6 had the lowest 50% inhibitive concentration (IC50) and cross-reactivity (CR), they were selected for subsequent experiments. By systematically optimizing the preparation condition of gold nanoparticles (AuNPs), AuNPs-labeled mAbs, and detection condition, the visual limit of detection (LOD) of the dual test strip was 1.0 μg/L for AFB1 and 5.0 μg/L for ZEN, whereas that of the test strip reader was 0.23 μg/L for AFB1 and 1.53 μg/L for ZEN. The high reproducibility and stability of the dual test were verified using mycotoxin-spiked samples. The dual test strips were highly specific and sensitive for AFB1 and ZEN, which were validated using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Thus, the proposed AFB1 and ZEN dual test strip is suitable for rapid and simultaneous detection of AFB1 and ZEN contamination in food and feed samples.

Multi-mycotoxin analysis method using liquid chromatography with tandem mass spectrometry and fluorescence detection in Indian medicinal herbs: Development and validation

While medicinal plants are in high demand worldwide for their therapeutic properties, they can constitute a health concern to consumers when contaminated with mycotoxins. The unavailability of standardised methods for multiclass mycotoxin analysis to assess health risks has thus been realised. This study reports a simple, robust and precise method to estimate nine regulated mycotoxins in a range of Indian medicinal plant matrices including giloy (Tinospora cordifolia), ashwagandha (Withania somnifera), safed musli (Chlorophytum borivilianum), satavari (Asparagus racemosus) and tulsi (Ocimum sanctum). The sample preparation method involved extraction of homogenised matrices (12.5 g) using methanol:water (8:2, 100 mL) followed by cleanup through a multi-mycotoxin immunoaffinity column (IAC), which significantly reduced matrix interferences. The method was initially developed and validated using liquid chromatography tandem mass spectrometry (LC-MS/MS) for the simultaneous analysis of aflatoxins (B₁, B₂, G₁, G₂), ochratoxin A, zearalenone, deoxynivalenol, T-2 and HT-2 toxin. Later, it was validated using LC-fluorescence (LC-FLD) for aflatoxins, ochratoxin A and zearalenone. The optimised sample preparation protocol and analytical method provided acceptable results. Compared to LC-FLD, it was possible to attain a lower limit of quantification (LOQ) with LC-MS/MS for all the tested analytes except aflatoxins. However, LOQs of both instruments were lower than the maximum limits (MLs), with recoveries ranging between 71 and 110% and precision (RSD) of ≤10% across matrices. Despite matrix-induced signal suppressions in LC-MS/MS analysis, the matrix-matched calibrations corrected all recoveries. Considering its accuracy, reliability, robustness and time-effectiveness, this method is recommended for regulatory testing purposes.

Ultra-fast RP-HPLC-FD-DAD for quantification of total aflatoxins in maize, rice, wheat, peanut and poultry feed without sample clean up, and population exposure risk assessment in Katsina, Nigeria: an optimization study

This study reports the development and validation of a simple, yet efficient method called the ultra-fast reverse phase high-performance liquid chromatography with fluorescence and photodiode array detector (UF-RP-HPLC-FD-DAD) to extract and quantify the total aflatoxin from grains and poultry feed. The proposed method is used to determine the total aflatoxin content in 150 samples of maize, rice, wheat, peanut and poultry feed obtained from open markets in a state in Nigeria. The extent of consumer exposure to aflatoxins and the risk of developing hepatocellular carcinoma (HCC) are evaluated. The UF-RP-HPLC-FD-DAD method was found to be satisfactorily accurate, sensitive and reliable as ascertained by its excellent validation outcomes (R² > 0.999, LoD < 0.08 ng g^-1, LoQ < 0.2 ng g^-1, recovery = 90-102%). The aflatoxin levels in food grains and poultry feed samples obtained in this study implied a moderate dietary exposure of between 10.67 and 20.77 ng/kg BW/day, in which the risk of developing HCC was estimated to be between 6.27 and 21.40% per 100,000 adults/year. Hence, greater monitoring of marketed food and feed is required, besides the deployment of strict controls and preventive techniques to minimize the population's exposure to a high dietary level of aflatoxins.

Prevalence of Aflatoxins in Selected Dry Fruits, Impact of Storage Conditions on Contamination Levels and Associated Health Risks on Pakistani Consumers

Dry fruits and nuts are nutritious foods with several health-promoting properties. However, they are prone to contamination with aflatoxins at all stages of production and storage. The present study aimed to determine the natural occurrence of aflatoxin B1 (AFB1), aflatoxin B2 (AFB2), aflatoxin G1 (AFG1), aflatoxin G2 (AFG2), and total aflatoxins (AFT) in dates, pistachios, and walnuts collected from four districts of South Punjab (Pakistan), and to assess the associated health risks as estimated by dietary exposure and the Margin of Exposure (MoE) determinations. The contents of AFB1 and AFT in these food products were monitored during storage under three different conditions (open-air, hermetically closed jars, and refrigeration at 4 °C) to determine the most efficient conditions in preventing aflatoxin accumulation. HPLC-fluorescence analysis of 60 samples of these products for aflatoxin contamination showed that 52 (86.7%) samples were contaminated at different levels, with a maximum of 24.2 ng/g. The overall (all samples) mean concentrations of AFB1, AFB2, AFG1, AFG2, and AFT were 3.39 ± 2.96, 1.39 ± 1.68, 1.63 ± 1.48. 1.12 ± 1.23, and 7.54 ± 6.68, respectively. The Estimated Daily Intake (EDI) and MoE of aflatoxins through the consumption of the products ranged from 0.06 ng/kg bw/day to 2.0 ng/kg bw/day and from 84.84 to 2857.13, respectively, indicating that consumers are at high health risk. Significant differences were recorded between aflatoxin levels in the samples stored under different storage conditions, with storage under refrigeration (4 °C) being the most effective in controlling aflatoxin accumulation, although storage in closed jars was also efficient and offers a more flexible alternative to retailers. The findings of the study urge official authorities of Pakistan to implement appropriate regulatory and control measures and surveillance program to alleviate the potential public health risks associated with the consumption of dry fruits and nuts in the scope of their increased consumption.

Recent advances in the highly sensitive determination of zearalenone residues in water and environmental resources with electrochemical biosensors

Zearalenone (ZEN), a significant class of mycotoxin which is considered as a xenoestrogen, permits, similar to natural estrogens, it's binding to the receptors of estrogen resulting in various reproductive diseases especially, hormonal misbalance. ZEN has toxic effects on human and animal health as a result of its teratogenicity, carcinogenicity, mutagenicity, nephrotoxicity, genotoxicity, and immunotoxicity. To ensure water and environmental resources safety, precise, rapid, sensitive, and reliable analytical and conventional methods can be progressed for the determination of toxins such as ZEN. Different selective nanomaterial-based compounds are used in conjunction with different analytical detection approaches to achieve this goal. The current review demonstrates the state-of-the-art advances of nanomaterial-based electrochemical sensing assays including various sensing, apta-sensing and, immunosensing studies to the highly sensitive determination of various ZEN families. At first, a concise study of the occurrence, structure, toxicity, legislations, and distribution of ZEN in monitoring has been performed. Then, different conventional and clinical techniques and procedures to sensitive and selective sensing techniques have been reviewed and the efficient comparison of them has been thoroughly discussed. This study has also summarized the salient features and the requirements for applying various sensing and biosensing platforms and diverse immobilization techniques in ZEN detection. Finally, we have defined the performance of several electrochemical sensors applying diverse recognition elements couples with nanomaterials fabricated using various recognition elements coupled with nanomaterials (metal NPs, metal oxide nanoparticles (NPs), graphene, and CNT) the issues limiting development, and the forthcoming tasks in successful construction with the applied nanomaterials.

Research advancements in optical imaging and spectroscopic techniques for nondestructive detection of mold infection and mycotoxins in cereal grains and nuts

Cereal grains and nuts are represented as the economic backbone of many developed and developing countries. Kernels of cereal grains and nuts are prone to mold infection under high relative humidity and suitable temperature conditions in the field as well as storage conditions. Health risks caused by molds and their molecular metabolite mycotoxins are, therefore, important topics to investigate. Strict regulations have been developed by international trade regulatory bodies for the detection of mold growth and mycotoxin contamination across the food chain starting from the harvest to storage and consumption. Molds and aflatoxins are not evenly distributed over the bulk of grains, thus appropriate sampling for detection and quantification is crucial. Existing reference methods for mold and mycotoxin detection are destructive in nature as well as involve skilled labor and hazardous chemicals. Also, these methods cannot be used for inline sorting of the infected kernels. Thus, analytical methods have been extensively researched to develop the one that is more practical to be used in commercial detection and sorting processes. Among various analytical techniques, optical imaging and spectroscopic techniques are attracting growers' attention for their potential of nondestructive and rapid inline identification and quantification of molds and mycotoxins in various food products. This review summarizes the recent application of rapid and nondestructive optical imaging and spectroscopic techniques, including digital color imaging, X-ray imaging, near-infrared spectroscopy, fluorescent, multispectral, and hyperspectral imaging. Advance chemometric techniques to identify very low-level mold growth and mycotoxin contamination are also discussed. Benefits, limitations, and challenges of deploying these techniques in practice are also presented in this paper.

Two-color, ultra-sensitive fluorescent strategy for Ochratoxin A detection based on hybridization chain reaction and DNA tweezers

A two-color fluorescent DNA tweezers was developed for ultrasensitive detection of Ochratoxin A (OTA) based on hairpin-locked aptamer and hybridization chain reaction (HCR) amplification strategy. OTA can bind with hairpin-locked aptamer and then trigger the HCR reaction to produce a long double-strand DNA. The side-chains of the long duplex can separately hybridize with the two locker sequences of DNA tweezer, causing the opening of DNA tweezer and the recovery of two-color fluorescent signals. It shows a good linear range from 0.02 to 0.8 ppb with limit of detection of 0.006 ppb for FAM and 0.014 ppb for Cy5, which is beyond the requirement of actual application. In addition, the two-color fluorescent strategy can greatly reduce the false positive rate. It shows excellent performance for detection of OTA in practical food sample.

Online specific recognition of mycotoxins using aptamer-grafted ionic affinity monolith with mixed-mode mechanism

Herein, a facile and practical aptamer-grafted ionic affinity monolith with mixed-mode mechanism was explored as a versatile platform for online specific recognition of polar and non-polar mycotoxins. The mixed-mode mechanism including molecular affinity adsorption (between aptamers and targets), hydrophilic interaction and ionic interaction (between stationary phase and targets) were adopted and provided a better flexibility in adjusting separation selectivity to reduce nonspecific adsorption with respect to the single mode. Preparation and characterization of aptamer-based affinity monoliths were investigated, The characterization of pore size distribution, Brunauer-Emmett-Teller (BET) surface area and the specificity and cross-reaction were also evaluated. As a result, the hydrophilic nature and negative charge on affinity monolith were obtained. Multiple interactions including aptamer affinity binding, hydrophilic interaction (HI) and ion exchange (IE) could be adopted for online selective extraction. Specific recognitions of polar ochratoxin A (OTA), non-polar zearalenone (ZEN) and aflatoxin B1 (AFB1) was fulfilled with LODs as 0.03, 0.05 and 0.05 μg/L, respectively. Applied to real cereals, good recoveries of the fortified OTA, AFB1 and ZEN were achieved as 92.6 ± 1.3% ~ 95.6 ± 1.3% (n=3), 93.9 ± 2.3% ~ 98.2 ± 3.4% (n=3) and 92.7 ± 2.0% ~ 96.9 ± 3.5% (n=3) in corn, wheat and rice, respectively. The results displayed that Apt-MCs with hydrophilic and ionic interaction mixed-mode mechanism were efficient enough and competent for the online recognition of mycotoxins in cereals.

Multiplex surface-enhanced Raman scattering detection of deoxynivalenol and ochratoxin A with a linear polymer affinity agent

A linear, methacrylamide polymer affinity agent was explored to capture two mycotoxins, deoxynivalenol (DON) and ochratoxin A (OTA), for multiplex surface-enhanced Raman scattering (SERS) detection. These mycotoxins are naturally occurring small molecules from fungi that can be dangerous at low concentrations. SERS detection was completed for each polymer-toxin complex at concentrations relevant to current safety regulation by the FDA: 1 ppm for DON and 5 ppb for OTA. Visibly distinguishable vibrational modes were observed in the multiplex spectra that were attributed to each mycotoxin individually, thus, not requiring any additional chemometric analysis. Density functional theory (DFT) was used to model DON and OTA to accurately label the vibrational modes in the experimental spectra as well as provide insight on the binding between both targets and the affinity agent. Fully modeled vibrations of these toxins are novel contributions due to OTA never being modeled and only a few published vibrational modes of DON. DFT guides empirical observations regarding hydrogen bonding at multiple sites of each mycotoxin target molecule through the amine groups on the polymer, confirming the capabilities of a single polymer affinity agent to facilitate multiplex detection of a class of molecules through less-specific interactions than traditional affinity agents.

Assessment of Deoxynivalenol in Wheat, Corn and Its Products and Estimation of Dietary Intake

The main goal of the present research was to explore the seasonal variation of deoxynivalenol (DON) in wheat, corn, and their products, collected during 2018-2019. Samples of 449 of wheat and products and 270 samples of corn and their products were examined using reverse-phase liquid chromatography with a UV detector. The findings of the present work showed that 104 (44.8%) samples of wheat and products from the summer season, and 91 (41.9%) samples from winter season were contaminated with DON (concentration limit of detections (LOD) to 2145 µg/kg and LOD to 2050 µg/kg), from summer and winter seasons, respectively. In corn and products, 87 (61.2%) samples from summer and 57 (44.5%) samples from winter season were polluted with DON with levels ranging from LOD to 2967 µg/kg and LOD to 2490 µg/kg, from the summer and winter season, respectively. The highest dietary intake of DON was determined in wheat flour 8.84 µg/kg body weight/day from the summer season, and 7.21 µg/kg body weight/day from the winter season. The findings of the work argued the need to implement stringent guidelines and create awareness among farmers, stakeholders, and traders of the harmful effect of DON. It is mostly observed that cereal crops are transported and stockpiled in jute bags, which may absorb moisture from the environment and produce favorable conditions for fungal growth. Therefore, these crops must store in polyethylene bags during transportation and storage, and moisture should be controlled. It is highly desirable to use those varieties that are more resistant to fungi attack. Humidity and moisture levels need to be controlled during storage and transportation.

Mycotoxin Determination in Animal Feed: An LC-FLD Method for Simultaneous Quantification of Aflatoxins, Ochratoxins and Zearelanone in This Matrix

Mycotoxins are toxic compounds for humans and animals that are produced by fungi. Mycotoxin contamination in feed is a global safety concern and effective control of these compounds in this matrix is needed. This study proposes a simple, cost-effective analytical method based on liquid chromatography coupled with a fluorescence detector, which is suitable for the routine monitoring of some of the most important mycotoxins in feed: aflatoxins (G2, G1, B2, and B1), zearalenone, and ochratoxins A and B. Mycotoxin extraction, chromatographic separation and quantification are carried out simultaneously for all mycotoxins. The extraction procedure is performed using acetonitrile, water and orthophosphoric acid (80:19:1). Purification of the extract is carried out using an OASIS PRIME HLB solid-phase extraction cartridge followed by a dispersive liquid-liquid microextraction procedure. Aflatoxins G1 and B1 are derivatized post-column (photochemical reactor at 254 nm) to increase their signal. The method has been validated in feed for pigs, cows, sheep, and poultry with very satisfactory results. The detection limits are 2 μg/kg for aflatoxins B1 and G1, 0.64 μg/kg for aflatoxins B2 and G2, 42 μg/kg for zearalenone, and 5 μg/kg for ochratoxins A and B. These values are low enough to allow for monitoring of these mycotoxins in feed. Global recovery values were between 73.6% and 88.0% for all toxins with a relative standard deviation (RSD) % < 7%. This methodology will facilitate laboratory control and analysis of mycotoxins in feed.

Towards high-efficient online specific discrimination of zearalenone by using gold nanoparticles@aptamer-based affinity monolithic column

Sensitive and specific analysis of zearalenone (ZEN) mycotoxin in cereals for ensuring food safety is critical and remains challenging. Herein, a new gold nanoparticles @aptamer-functionalized hybrid affinity monolithic column was proposed and employed for online specific recognition of ZEN by HPLC. Characterization on the morphology, Brunauer-Emmett-Teller (BET) surface area mechanical stability and specific performance of the obtained affinity monolith were investigated. A super-high aptamer coverage density could reach 3636 pmol/μL, which is preferable to gain an effective analysis of ZEN with high specificity and a low interference of co-existed substances including typical α-Zearalenol (α-ZOL) and Aflatoxin B₁ (AFB₁). The sensitive recognition of trace ZEN was obtained with the limit of detection (LOD) as low as 0.05 ng/mL. Applied to real cereal samples, satisfactory recoveries were obtained in the range of 91.6 ± 1.4%-97.8 ± 2.6% (n = 3) in corn, 93.8 ± 3.1%-95.0 ± 3.6% (n = 3) in wheat, and 90.9 ± 4.7%-94.7 ± 3.8% (n = 3) in rice, respectively. The results on quantitative analysis were similar to that of LC-MS and better than that obtained by using immunoaffinity column (IAC) or molecularly imprinted polymer (MIP). This protocol provided an efficient access to high-efficient online specific recognition of ZEN in cereals by using such an aptamer-affinity capillary monolithic column.

Mycotoxin Detection in Maize, Commercial Feed, and Raw Dairy Milk Samples from Assiut City, Egypt

This survey was conducted to investigate the contamination by multiple mycotoxins, aflatoxins (AFB₁, AFB₂, AFG₁, and AFG₂), ochratoxin A (OTA), and zearalenone (ZEA) in 61 samples of maize and 17 commercial animal feed samples, and of aflatoxin M₁ (AFM₁) in raw dairy milk samples (n = 20) collected from Assiut City in Upper Egypt. Multi-mycotoxin immunoaffinity columns were used for samples cleanup and mycotoxin purification. An HPLC–FLD system with an on-line post-column photochemical derivatization was used for the detection of the target toxins. AFB₁ was detected in both maize (n = 15) and feed (n = 8), with only one maize sample presenting a concentration above the maximum permissible level set by the Egyptian authorities. AFB₂ was observed in six maize samples and in one feed sample, with a maximum value of 0.5 μg/kg. ZEA was detected only in feed samples (n = 4), with a maximum value of 3.5 μg/kg, while OTA, AFG₁, and AFG₂ were under the limits of detection. For milk, all the analyzed samples (100%) were contaminated with AFM₁, and 14 samples (70%) presented concentrations above the maximum permissible level in the European Union (EU) (0.05 μg/kg). The concentrations ranged from 0.02 μg/kg to 0.19 μg/kg, except that of one sample, which was under the limit of quantification. The contamination rates in maize and animal feeds are not alarming. In contrast, the consumption of dairy milk samples in Assiut City may pose public health hazards, as AFM₁ levels were found to exceed the international permissible limits. Further surveys are highly recommended in order to establish a database for mycotoxin occurrence in Egypt to minimize the possible health risks in animals and humans.

Pre- and Postharvest Strategies to Minimize Mycotoxin Contamination in the Rice Food Chain

Rice is part of many people's diet around the world, being the main energy source in some regions. Although fewer reports exist on the occurrence of mycotoxins in rice compared to other cereals, fungal contamination and the associated production of toxic metabolites, even at lower occurrence levels compared to other crops, are of concern because of the high consumption of rice in many countries. Due to the diversity of fungi that may contaminate the rice food chain, the co-occurrence of mycotoxins is frequent. Specific strategies to overcome these problems may be applied at the preharvest part of the crop chain, while assuring good practices at harvest and postharvest stages, since different fungi may find suitable conditions to grow at the various stages of the production chain. Therefore, the aim of this review is to present the state-of-the-art knowledge on such strategies in an integrated way, from the field to the final products, to reduce mycotoxin contamination in rice.

Solid phase extraction as sample treatment for the determination of Ochratoxin A in foods: A review

Ochratoxin A (OTA) is a mycotoxin produced by two main types of fungi, Aspergillus and Penicillium species. OTA is a natural contaminant found in a large number of different matrices and is considered as a possible carcinogen for humans. Hence, low maximum permitted levels in foods have been established by competent authorities around the world, making essential the use of very sensitive analytical methods for OTA detection. Sample treatment is a crucial step of analytical methodology to get clean and concentrated extracts, and therefore low limits of quantification. Solid phase extraction (SPE) is a useful technique for rapid and selective sample preparation. This sample treatment enables the concentration and purification of analytes from the sample solution or extract by sorption on a solid sorbent. This review is focused on sample treatment procedures based on SPE prior to the determination of OTA in food matrices, published from 2010.

Occurrence, Toxicity, and Analysis of Major Mycotoxins in Food

Mycotoxins are toxic secondary metabolites produced by certain filamentous fungi (molds). These low molecular weight compounds (usually less than 1000 Daltons) are naturally occurring and practically unavoidable. They can enter our food chain either directly from plant-based food components contaminated with mycotoxins or by indirect contamination from the growth of toxigenic fungi on food. Mycotoxins can accumulate in maturing corn, cereals, soybeans, sorghum, peanuts, and other food and feed crops in the field and in grain during transportation. Consumption of mycotoxin-contaminated food or feed can cause acute or chronic toxicity in human and animals. In addition to concerns over adverse effects from direct consumption of mycotoxin-contaminated foods and feeds, there is also public health concern over the potential ingestion of animal-derived food products, such as meat, milk, or eggs, containing residues or metabolites of mycotoxins. Members of three fungal genera, Aspergillus, Fusarium, and Penicillium, are the major mycotoxin producers. While over 300 mycotoxins have been identified, six (aflatoxins, trichothecenes, zearalenone, fumonisins, ochratoxins, and patulin) are regularly found in food, posing unpredictable and ongoing food safety problems worldwide. This review summarizes the toxicity of the six mycotoxins, foods commonly contaminated by one or more of them, and the current methods for detection and analysis of these mycotoxins.

Application of superabsorbent polymers (SAP) as desiccants to dry maize and reduce aflatoxin contamination

The ability of superabsorbent polymers (SAP) in drying maize and controlling aflatoxin contamination was studied under different temperatures, drying times and SAP-to-maize ratios. Temperature and drying time showed significant influence on the aflatoxin formation. SAP-to-maize ratios between 1:1 and 1:5 showed little or no aflatoxin contamination after drying to the optimal moisture content (MC) of 13 %, while for ratios 1:10 and 1:20, aflatoxin contamination was not well controlled due to the overall higher MC and drying time, which made these ratios unsuitable for the drying process. Results clearly show that temperature, frequency of SAP change, drying time and SAP-to-maize ratio influenced the drying rate and aflatoxin contamination. Furthermore, it was shown that SAP had good potential for grain drying and can be used iteratively, which can make this system an optimal solution to reduce aflatoxin contamination in maize, particular for developing countries and resource-lacking areas.

Aflatoxins in cereals: worldwide occurrence and dietary risk assessment

The worldwide occurrence of aflatoxins (AFB1, AFB2, AFG1, AFG2), genotoxic mycotoxins, in raw maize, rice, sorghum and wheat samples collected since the year 2000 was evaluated using published data and occurrence data from the GEMS/Food database (https://extranet.who.int/gemsfood). Dietary risk assessments were conducted using GEMS/Food total aflatoxin occurrence and food consumption data obtained from the 17 Cluster Diets. Risk characterisation arising from aflatoxin exposure was conducted using both cancer risk and margin of exposure (MOE) approaches. A total of 89 publications were retrieved from the literature, reporting data related to 18,097 samples, of which 37.6% were positive for at least one aflatoxin. The total upper bound (UB) mean for all samples analysed was 13.6 μg/kg, and was higher for rice (24.6 μg/kg) and sorghum (25.9 μg/kg). Of data related to the analysis of 4,536 samples reported to GEMS/Food database, 12.7% were positive for at least one aflatoxin. The total UB mean was 1.9 μg/kg, and was higher for rice (2.4 μg/kg) and maize (1.6 μg/kg). Total intakes ranged from 3.0 ng/kg bw/day (Cluster C11) to 17.1 ng/kg bw/day (Cluster C09). On average, the consumption of rice contributed to 41.6% of the total aflatoxin intake in all clusters, followed by wheat (35.4%), maize (21.2%) and sorghum (1.8%). The lowest cancer risk was found in cluster C11 (0.057 cancers/year/105 individuals), and the highest in cluster C09 (0.467 cancers/year/105 individuals). MOE ranged from 56 (C11) to 10 (C09), indicating a potential risk to consumers. These results highlight the need for continuous action by health authorities to decrease aflatoxin contamination in cereals, as they are staple foods in diets worldwide. These actions include the enforcement of code of practices at the national level and the establishment of maximum contamination levels by the Codex System.

Simple high-performance liquid chromatography method for the simultaneous analysis of aflatoxins, ochratoxin A, and zearalenone in dried and ground red pepper

Aflatoxins B1, B2, G1, G2 (AFB1, AFB2, AFG1, AFG2), ochratoxin A (OTA), and zearalenone (ZEA) in dried and ground red pepper (Capsicum annuum) were simultaneously analyzed with high-performance liquid chromatography coupled to fluorescence detection after post-column derivatization. The analytical method was validated for specificity, selectivity, linearity, limits of detection and quantification, recovery, precision, and measurement of uncertainty. The limits of detection and quantification were 0.10 and 0.25 μg/kg for AFB1, 0.04 and 0.06 μg/kg for AFB2, 0.14 and 0.50 μg/kg for AFG1, 0.05 and 0.10 μg/kg for AFG2, 0.12 and 0.45 μg/kg for OTA, and 4.00 and 13.25 μg/kg for ZEA, respectively. The average recoveries ranged from 80.4 to 98.5% for different concentrations of AFB1, AFB2, AFG1, AFG2, OTA, and ZEA in spiked samples. The measurement uncertainties were 0.64 to 1.62 μg/kg for AFB1, 0.24 to 0.45 μg/kg for AFB2, 0.79 to 2.19 μg/kg for AFG1, 0.32 to 0.61 μg/kg for AFG2, 0.81 to 2.31 μg/kg for OTA, and 8.48 to 26.25 μg/kg for ZEA. This method was successfully applied for the simultaneous determination of mycotoxins for 78 red peppers collected from Korean and Indian markets. Aflatoxins (sum of AFB1, AFB2, AFG1, and AFG2) were detected in 2% of nonpacked samples (n = 23) and 43% of packed samples (n = 55), at levels of 0.04 to 38.03 μg/kg. OTA was detected in 4% of nonpacked samples and 48% of packed samples, at levels of 0.15 to 56.30 μg/kg. ZEA was not detected in any samples. These findings indicate that the analytical method described here is suitable for the routine determination of the amounts of AFs, OTA, and ZEA in dried and ground red pepper.

Modelling of aflatoxin G1 reduction by kefir grain using response surface methodology

Aflatoxin G1 (AFG1) is one of the main toxic contaminants in pistachio nuts and causes potential health hazards. Hence, AFG1 reduction is one of the main concerns in food safety. Kefir-grains contain symbiotic association of microorganisms well known for their aflatoxin decontamination effects. In this study, a central composite design (CCD) using response surface methodology (RSM) was applied to develop a model in order to predict AFG1 reduction in pistachio nuts by kefir-grain (already heated at 70 and 110°C). The independent variables were: toxin concentration (X1: 5, 10, 15, 20 and 25 ng/g), kefir-grain level (X2: 5, 10, 20, 10 and 25%), contact time (X3: 0, 2, 4, 6 and 8 h), and incubation temperature (X4: 20, 30, 40, 50 and 60°C). There was a significant reduction in AFG1 (p < 0.05) when pre-heat-treated kefir-grain used. The variables including X1, X3 and the interactions between X2-X4 as well as X3-X4 have significant effects on AFG1 reduction. The model provided a good prediction of AFG1 reduction under the assay conditions. Optimization was used to enhance the efficiency of kefir-grain on AFG1 reduction. The optimum conditions for the highest AFG1 reduction (96.8%) were predicted by the model as follows: toxin concentration = 20 ng/g, kefir-grain level = 10%, contact time = 6 h, and incubation temperature = 30°C which validated practically in six replications.

Heliotropium europaeum poisoning in cattle and analysis of its pyrrolizidine alkaloid profile

Pyrrolizidine alkaloids (PAs) are carcinogenic and genotoxic phytochemicals found exclusively in angiosperms. The ingestion of PA-containing plants often results in acute and chronic toxicities in man and livestock, targeting mainly the liver. During February 2014, a herd of 15-18-month-old mixed-breed beef cattle (n = 73) from the Galilee region in Israel was accidently fed hay contaminated with 12% Heliotropium europaeum (average total PA intake was 33 mg PA/kg body weight/d). After 42 d of feed ingestion, sudden death occurred over a time period of 63 d with a mortality rate of 33%. Necropsy and histopathological examination revealed fibrotic livers and moderate ascites, as well as various degrees of hyperplasia and fibrosis of bile duct epithelial cells. Elevated γ-glutamyl-transferase and alkaline phosphatase levels were indicative of severe liver damage. Comprehensive PA profile determination of the contaminated hay and of native H. europaeum by LC-MS/MS revealed the presence of 30 PAs and PA-N-oxides, including several newly reported PAs and PA-N-oxides of the rinderine and heliosupine class. Heliotrine- and lasiocarpine-type PAs constituted 80% and 18% of the total PAs, respectively, with the N-oxides being the most abundant form (92%). The PA profile of the contaminated hay showed very strong resemblance to that of H. europaeum.

The relationship between ergosterol and mycotoxin contamination in maize from various countries

Maize is a good substrate for fungal growth and production of toxic secondary metabolites or mycotoxins. The relationships between the fungal biomarker ergosterol (ERG) and mycotoxins such as aflatoxins (AFs), ochratoxin A (OTA) and zearalenone (ZEA) were investigated in maize collected from four different geographic locations. ERG and mycotoxins were measured by high-performance liquid chromatography with UV and fluorescence detection. ERG did not correlate with AFs in 139 analysed samples. OTA contamination was found in only one sample from the North American region. A significant correlation (r (2) = 0.82) was observed between ERG and ZEA. AFs and ZEA were found in 47% of all samples. Half of the samples contained more than two mycotoxins. Levels of ERG and mycotoxin contamination differed by geographical region. North American and Asian samples had higher frequencies and levels of ERG and mycotoxin contamination. No AF contamination was observed in European samples (limit of detection 0.025 μg/kg for AFB1). We conclude that samples containing less than 3 mg/kg ERG in most cases do not exceed the EU maximum limits for AFs, OTA and ZEA.

Cross-reactivity of antibodies with phenolic compounds in pistachios during quantification of ochratoxin A by commercial enzyme-linked immunosorbent assay kits

Ochratoxin A (OTA), a nephrotoxic mycotoxin, naturally occurs in wide range of agricultural commodities. Typical screening of OTA involves various enzyme-linked immunosorbent assay (ELISA) methods. Pistachio (Pistacia vera L.) is a rich source of phenolic compounds that may result in a false positive due to structural similarities to OTA. The present study investigated the cross-reactivity profiles of phenolic compounds using two commercial ELISA test kits. High-performance liquid chromatography was used to confirm the concentration of OTA in the pistachio samples and compared with the results obtained from ELISA. When the degree of interaction and 50 % inhibitory concentration of phenolic compounds were determined, the cross-reactivity showed a pattern similar to that observed with the commercial ELSIA kits, although quantitatively different. In addition, the degree of interaction increased with the increasing concentration of phenolic compounds. The ELISA value had stronger correlations with the content of total phenolic compound, gallic acid, and catechin (R(2) = 0.757, 0.732, and 0.729, respectively) compared with epicatechin (R(2) = 0.590). These results suggest that phenolic compounds in pistachio skins may cross-react with the OTA antibody and lead to a false positive or to an overestimation of OTA concentration in ELISA-based tests.

Simultaneous determination of four aflatoxins and ochratoxin A in ginger and related products by HPLC with fluorescence detection after immunoaffinity column clean-up and postcolumn photochemical derivatization

Ginger, a widely used spice and traditional Chinese medicine, is prone to be contaminated by mycotoxins. A simple, sensitive, and reproducible method based on immunoaffinity column clean-up coupled with HPLC and on-line postcolumn photochemical derivatization with fluorescence detection was developed for the simultaneous determination of aflatoxins (AFs) B1 , B2 , G1 , G2 , and ochratoxin A (OTA) in 25 batches of gingers and related products marketed in China for the first time. The samples were first extracted by ultrasonication with methanol/water (80:20, v/v) and then cleaned up with immunoaffinity columns for analysis. Under the optimized conditions, the LODs and LOQs for the five mycotoxins were 0.03-0.3 and 0.1-0.9 μg/kg, respectively. The average recoveries ranged from 81.3-100.8% for AFs and from 88.6-99.5% for OTA at three spiking levels. Good linearity was observed for the analytes with correlation coefficients all >0.9995. All moldy gingers were contaminated with at least one kind of the five investigated mycotoxins, while none of them were found in normal gingers. Ginger powder samples were contaminated slightly with the contamination levels below the LOQs, while ginger tea bags were mainly contaminated by OTA at 1.05-1.19 μg/kg and ginger black tea bags were mainly contaminated by AFs at 3.37-5.76 μg/kg. All the contamination levels were below the legally allowable limits.

Single laboratory method validation comparing MS3 with FI/MS fingerprinting, and quantitation strategies for the accurate determination of ochratoxins in beer

The current mycotoxin safety concerns demand the availability of reliable and selective control systems to measure the content of mycotoxins present in daily food. To address this, we report a prospective analytical tool involving the application of a flow injection mass spectrometry (FI/MS) tandem artificial neural network (ANN) strategy to predict the amount of ochratoxin A and B (OTA and OTB) in beer. Triple stage mass spectrometry (MS3) aided by chromatographic separation was applied as a reference method for comparison. 0.1% formic acid and methanol were used to convert ochratoxins into their respective ions under negative MS polarity. For experiments involving MS3, ochratoxins were separated by reversed-phase liquid chromatography in a 6 min run, ionised using electrospray ionisation, and detected by tandem mass spectrometry. Analyte-specific mass-to-charge ratios were used to perform quantitation in MS3 mode. For experiments involving FI/MS, no chromatographic separation was performed. Approximately 2% of the mass spectra was used for model construction. ANN models representing each ochratoxin were individually trained and validated using three sets of matrix-matched and matrix-free calibration curves at nine concentration levels of 2.5, 10, 25, 50, 100, 200, 300, 400 and 500 μg/l. Quintuplicate analyses were made in FI/ MS mode providing a total of 270 spectra for both OTA and OTB. Single measurement was made for each sample in MS3 mode. A root-mean-square error value of <1% was reported for both ochratoxin models in beer. Limits of quantitation were determined to be 0.2 μg/kg for both MS3 and FI/MS mode. Recovery assessment was performed over two days using beer blanks (n=6) spiked at three concentration levels of 5, 100 and 200 μg/kg. Extraction using acetonitrile provided excellent recovery ranges of 88 to 102% for both MS techniques. Relative standard deviations of 10% or better were achieved for interday spike recovery experiments. The successful utilisation of FI/MS without performing chromatographic separation implies the availability of a new analytical tool relevant to the field of mycotoxin analysis, possibly offering analyte specificity exceeding the capability of MS3 through chemometry.

Developments in mycotoxin analysis: an update for 2010-2011

This review highlights developments in mycotoxin analysis and sampling over a period between mid-2010 and mid-2011. It covers the major mycotoxins: aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxin, patulin, trichothecenes, and zearalenone. Analytical methods for mycotoxins continue to be developed and published. Despite much interest in immunochemical methods and in the rapid development of LC-MS methodology, more conventional methods, sometimes linked to novel clean-up protocols, have also been the subject of research publications over the above period. Occurrence of mycotoxins falls outside the main focus of this review; however, where relevant to analytical method development, this has been mentioned.