Optimization of the enzymatic elimination of flumequine by laccase-mediated system using response surface methodology

Degradation of 2,4-DCP by the immobilized laccase on the carrier of sodium alginate-sodium carboxymethyl cellulose

In this paper, sodium alginate-sodium carboxymethyl cellulose (SA-CMC) composite material was used as a carrier, and sodium alginate-embedded laccase (Lac@SC) was prepared by traditional embedding method. After that, ethylene glycol diglycidyl ether (EGDE) and glutaraldehyde (GLU) were used as cross-linking agents, two different cross-linking-embedded co-immobilized laccases (Lac@SCG and Lac@SCE) were innovatively prepared, respectively, and then these immobilized laccases were characterized by SEM, FT-IR and XRD, and the stability of the three immobilized laccases was explored. In addition, the effects of different factors on the removal of 2,4-DCP by immobilized laccase were studied, and the degradation kinetic models of three immobilized laccases on 2,4-DCP were summarized, the possible degradation pathways of pollutants were also given. Experimental results showed that compared to free laccase, the pH stability, thermal stability and storage stability of immobilized laccase were greatly improved. These immobilized laccases could maintain high activity at pH3~6, 45~55 °C. Lac@SCG had the best storage stability. After 30 days of storage, the relative enzyme activity was still more than 40%. Lac@SC had good reusability, the relative enzyme activity was still more than 50% after 5 uses. In the degradation of 2,4-DCP, all three immobilized laccases showed good performance, when Lac@SCE was at pH5, 35 °C, 25 h, the removal rate of 2,4-DCP could reach 95.2%; When at 45 °C, Lac@SC had the highest degradation rate which reach to 94%; At 45 °C, the degradation rate of Lac@SCG reached 83.2%.

Antibiotic residues in environment: antimicrobial resistance development, ecological risks, and bioremediation

The overuse of antibiotics and their disposal without processing are leading the environment and its inhabitants towards a serious health emergency. There is abundance of diverse antibiotic resistance genes and bacteria in environment, which demands immediate attention for the effective removal of antibiotics. There are physical and chemical methods for removal, but the generation of toxic byproducts has directed the efforts towards bioremediation for eco-friendly and sustainable elimination of antibiotics from the environment. Various effective and reliable bioremediation approaches have been used, but still antibiotic residues pose a major global threat. Recent developments in molecular and synthetic biology might offer better solution for engineering of microbe-metabolite biodevices and development of novel strains endowed with desirable properties. This review summarizes the impact of antibiotics on environment, mechanisms of resistance development, and different bioremediation approaches.

High efficiency of osmotically stable laccase for biotransformation and micro-detoxification of levofloxacin in the urea-containing solution: Catalytic performance and mechanism

Laccase-catalyzed oxidation was applied in the biotransformation of levofloxacin (a potentially environmental antibiotic contamination); however, the enzyme may denature in urea-containing wastewater and lead to the formation of an inactive form followed by decreasing the yield of the bio-removal. In this study, the osmolytes-stabilized laccase was used to eliminate levofloxacin in the urea-containing solution. Sorbitol and proline 100 mM appeared to be the two most efficient laccase protectants against the urea-induced denaturation. In a 1-M urea solution, the maximum velocity (V_max) of laccase was estimated to be 39.1 μmol min^-1 mg^-1. This value was improved to 101.7 and 51.8 μmol min^-1 mg^-1 in the presence of sorbitol and proline, respectively. In optimal conditions for the elimination of levofloxacin, sorbitol- and proline-treated laccase led to 82.9 % and 76.2 % bio-removal of the applied fluoroquinolone in 1 M urea solution, respectively. Biotransformation products of the parent antibiotic were spectroscopically analyzed that assigned to different reaction pathways including demethylation, defluorination, decarboxylation, deamination, and hydroxylation. A micro-toxicity study concerning the growth of some Gram⁺ and Gram^- bacteria exhibited decreasing in inhibition of laccase-treated levofloxacin after a 10-h incubation at 37 °C.

The optimization of enzymatic oxidation of levofloxacin, a fluoroquinolone antibiotic for wastetwater treatment

The global presence of antibiotics in the environment has created concerns about the emergence of antibiotic resistance bacteria and potential hazard to humans and the ecosystem. This work aims to study the removal of levofloxacin, a new generation fluoroquinolone antibiotic from aqueous solutions by enzyme mediated oxidation process and optimization of the conditions thereof by response surface methodology (RSM) using Box-Behnken design (BBD). For this study, experiments were conducted to analyze the effect of independent variables namely, pH, temperature, mediator concentration and antibiotic concentration on the degradation percentage of levofloxacin antibiotic using laccase enzyme derived from Trametes versicolor. The residual levofloxacin concentration was determined using high performance liquid chromatography (HPLC). On applying the quadratic regression analysis, among the main parameters, it was found that the percentage degradation was significantly affected by all the four variables. The predicted values for percentage degradation of levofloxacin were close to the experimental values obtained and the R² (0.95) indicated that the regression was able to give a good prediction of response for the percentage degradation of levofloxacin in the studied range. The optimal conditions for the maximum degradation (99.9%) as predicted by the BBD were: temperature of 37 °C, pH of 4.5, mediator concentration of 0.1 mM and levofloxacin concentration of 5 μg mL^-1. The findings of the study were further extended to study the effect of partially purified enzymes isolated from Pleurotus eryngii, Pleurotus florida and Pleurotus sajor caju on the degradation of levofloxacin at concentrations ranging from as low as 0.1 to as high as 50 µg mL^-1 in synthetic wastewater utilizing the optimized conditions generated by BBD. A maximum degradation of 88.8% was achieved with the partially purified enzyme isolated from Pleurotus eryngii at 1 µg mL^-1 levofloxacin concentration which was at par with the commercial laccase which showed 89% degradation in synthetic wastewater at the optimized conditions. The biodegradation studies were conducted using only 2 units of laccase. Thus, the expensive commercial laccase can be effectively replaced by crude laccase isolated from indigenous macrofungi such as P. eryngii, P. florida and P. sajor caju as a cost effective alternative to degrade levofloxacin present in contaminated wastewater using as low as 2 units of enzyme for a 72 h treatment period.

Magnetic carnosine-based metal-organic framework nanoparticles: fabrication, characterization and application as arsenic adsorbent

This study centers on the controllable synthesis, characterization, and application of a novel magnetic bio-metal-organic framework (Bio-MOF) for the adsorption and subsequent removal of arsenic from aqueous solutions. Zinc ions and carnosine (Car) were exploited to construct the Car-based MOF on the surface of magnetite (Fe₃O₄ NPs). The Magnetite precoating with Car led to an increase in the yield and the uniform formation of the magnetic MOF. The prepared magnetic Bio-MOF nanoparticles (Fe₃O₄-Car-MOF NPs) had semi-spherical shape with the size in the range of 35-77 nm, and the crystalline pattern of both magnetite and Car-based MOF. The NPs were employed as an adsorbent for arsenic (As) removal. The adsorption analyses revealed that all studied independent variables including pH, adsorbent dose, and initial arsenic concentration had a significant effect on the arsenic adsorption, and the adsorption data were well matched to the quadratic model. The predicted adsorption values were close to the experimental values confirming the validity of the suggested model. Furthermore, adsorbent dose and pH had a positive effect on arsenic removal, whereas arsenic concentration had a negative effect. The adsorption isotherm and kinetic studies both revealed that As adsorption fitted best to the Freundlich isotherm model. The maximum monolayer adsorption capacity (94.33 mg/g) was achieved at room temperature, pH of 8.5 and adsorbent dose of 0.4 g/L. Finally, the results demonstrated that the adsorbent could be efficiently applied for arsenic removal from aqueous environment.

Modeling of azo dyes adsorption on magnetic NiFe2O4/RGO nanocomposite using response surface methodology

BACKGROUND

Azo group dyes are the largest group of synthetics dyes that widely used in industries, especially in textile industry. The presence of these organic compounds in wastewaters and their discharge into environment without efficient treatment may cause adverse effect on human, living and aquatic environment. The purpose of this study was to optimize the adsorption of azo dye of Direct Red 81 (anionic dye) and Basic Blue 41 (cationic dye) from aqueous solution onto magnetic NiFe₂O₄/RGO nanocomposite.

METHODS

In this study the response surface methodology (RSM) based on the central composite design (CCD), was used to optimization and modeling of adsorption process DR81 and BB41 dye on NiFe₂O₄/RGO. in order to investigating the effect of the operating parameters on the adsorption efficiency DR81 and BB41, four influential factors were chosen that includes of pH (3-9), contact time (5-25 min), adsorbent amount (0.02-0.05 g) and initial dye concentration (40-200 mg/L). A total of 30 experiments were performed for each dye in this study. The concentration of dye in solution was measured by spectrophotometer. The structure of synthesized adsorbent was investigated using Scanning Electron Microscope (SEM), X-ray diffraction (XRD), Fourier transform irradiation (FTIR), transmission electron microscope (TEM) and vibrating sample magnetometer (VSM).

RESULTS

Analysis of variance (ANOVA) showed that regression model for both dye adsorption with value of P value <0.001 is significant statistically. The correlation coefficient (R²) for DR81 (R² = 0.9968) and BB41 (R² = 0.9948) indicated which there is a good agreement between predicted values and the results of the experiments and the model also well predict the adsorption efficiency. Furthermore, the factors of pH, dye concentration and adsorbent dose, have the greatest effect on adsorption, respectively, while contact time have the lowest effect on adsorption of both dyes. The adsorption behavior of the DR81 and BB41 onto NiFe₂O₄/RGO was best described by the Langmuir and Freundlich isotherm, respectively. The optimum conditions for maximum removal of DR81 (96.41%) was found to be at pH 3, contact time 19.68 min, adsorbent dose 0.02 g and initial dye concentration 40 mg/L. However, the optimum conditions for maximum removal of BB41 (97.87%) was found to be at pH 9 contact time 18.16 min, adsorbent dose 0.02 g and initial dye concentration 40 mg/L.

CONCLUSION

The present study shows that magnetic NiFe₂O₄/RGO nanocomposite have much potential as a powerful adsorbent for the rapid adsorption of anionic (DR81) and cationic dyes (BB41) from aqueous solution.

Empirical modelling and optimization of pressure-coupled infusion gyration parameters for the nanofibre fabrication

Pressure-coupled infusion gyration (PCIG) is a novel promising technique for economical and effective mass production of nanofibres with desirable geometrical characteristics. The average diameter of spun fibres significantly influences the structural, mechanical and physical properties of the produced fibre mats. Having a comprehensive understanding of the significant effects of PCIG experimental variables on the spun fibres is beneficial. In this work, response surface methodology was used to explore the interaction effects and the optimal PCIG experimental variables for achieving the desired morphological characteristics of fibres. The effect of experimental variables, namely solution concentration, infusion (flow) rate, applied pressure and rotational speed, was studied on the average fibre diameter and standard deviations. A numerical model for the interactional influences of experimental variables was developed and optimized with a nonlinear interior point method that can be used as a framework for selecting the optimal conditions to obtain poly-ethylene oxide fibres with desired morphology (targeted average diameter and narrow standard deviation). The adequacy of the models was verified by a set of validation experiments. The results proved that the predicted optimal conditions were able to achieve the average diameter that matched the pre-set desired value with less than 10% of difference.

Data on corrosive water in the sources and distribution network of drinking water in north of Iran

This study aimed to determine the parameters of scaling and corrosion potential of drinking water in sources and distribution networks of water supply in two cities of north of Iran. The results of Amlash water sampels analysis in winter revealed that the average values of Langelier, Ryznar, Aggressive, Pockorius, and Larson- skold indices was −1.31, 9.73, 11.5, 9.74 and 0.24, respectively, but, in summer they were −1.51, 10.71, 11.36, 10.72 and 0.25, respectively. For Rudsar, the results of water sampels analysis in winter illustrated that the average values of Langelier, Ryznar, Aggressive, Pockorius, and Larson was −1.12, 9.69, 11.33, 9.19 and 0.16, respectively, while, in summer they were −1.05, 10.04, 11.92, 10.18 and 0.19, respectively. The beneficial of this data is showing the clear image of drinking water quality and can be useful for preventing the economical and safety problems relating to corrosion and scaling of drinking water.

Direct Blue 71 removal from aqueous solution by laccase-mediated system; A dataset

The removal of Direct Blue 71 (DB71), by laccase (EC 1.10.3.2, p-bezenediol:dioxygen oxidoreductases) enzyme in presence of 2,2′-Azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS), in aqueous solution was investigated. Data on this article focused on the optimizing and modeling of DB71 removal by Response surface method (RSM) based on Box–Behnken design (BBD), through studying the effective variables as follows: ABTS dose (0.05–0.2 mM), Laccase dose (0.05–0.2 U mL⁻¹), and pH (3–7). The results of experimental showed that laccase was able to removal DB71 with removal percentage of 83% at concentration of 50 mg L⁻¹ after 30 min incubation in presence of ABTS 0.2 mM, at temperature 40 °C and pH 5. The Analysis of Variance (ANOVA) for the predicted quadratic model was done and quadratic equation showed significant R-Squared (0.9969), Adjusted R-Squared (0.9914) and Adequate Precision (49.7). The lack of fit is not significant due to p-value prob > F more than 0.05.

Adsorption of cadmium and lead onto live and dead cell mass of Pseudomonas aeruginosa: A dataset

In this research heavy metals, Cd and Pb, adsorption efficiency was evaluated in aqueous solutions using live and dead biomass of Pseudomonas aeruginosa bacteria. The various important parameters including; pH, temperature, Cd and Pb concentrations, contact time, live and dead cell mass were examined. First, the resistant P. aeruginosa to heavy metals identified and isolated from contaminated soil. Then, the Minimum Inhibitory Concentration (MIC) of Cd and Pb was determined for P. aeruginosa. The highest adsorption efficiency for Cd and Pb were 87% and 98.5%, under dead cell mass of 125 mg, pH 7, temperature 35 °C and contact time 90 min, respectively. The results of this study showed that P. aeruginosa have a high ability to adsorption of Cd and Pb in aqueous solutions.

Data on modeling of enzymatic elimination of Direct Red 81 using Response Surface Methodology

In this article, three variables including laccase dose, 2,2'-Azinobis-(3-ethylbenzothiazoline-6-sulfonate) (ABTS) dose and pH were used to modeling of Direct Red 81 (DR81) elimination from aqueous solutions by laccase-mediated system. Obtained data indicated that the predicted and experimental values were close for DR81 elimination, and the regression was also able to give a good prediction of response for DR81 elimination (R-Squared = 0.9983). From the experimental, the highest elimination of the DR81 was 95. 5% after 30 min incubation at pH 5, temperature 40 °C, ABTS 0.2 mM, and initial concentration of DR81 50 mg L⁻¹ in the presence of 0.2 U mL⁻¹ of the laccase. The data showed that the laccase can be used as a "green" technology for treating of dyes from aqueous solutions. Data analysis was performed using Design-Expert version 7.0.0 (Stat-Ease, trial version).

Laccase-Mediated Treatment of Pharmaceutical Wastes

Laccases are versatile multi-copper enzymes belonging to the superfamily of oxidase enzymes, which have been known since the nineteenth century. Recent discoveries have refined investigators' views of the potential of laccase as a magic tool for remarkable biotechnological purposes. A literature review of the capabilities of laccases, their assorted substrates, and their molecular mechanism of action now indicates the emergence of a new direction for laccase application as part of an arsenal in the fight against the contamination of water supplies by a number of frequently prescribed medications. This chapter provides a critical review of the literature and reveals the pivotal role of laccases in the elimination and detoxification of pharmaceutical contaminants in aquatic environments and wastewaters.

Laccases: Production, Expression Regulation, and Applications in Pharmaceutical Biodegradation

Laccases are a family of copper-containing oxidases with important applications in bioremediation and other various industrial and biotechnological areas. There have been over two dozen reviews on laccases since 2010 covering various aspects of this group of versatile enzymes, from their occurrence, biochemical properties, and expression to immobilization and applications. This review is not intended to be all-encompassing; instead, we highlighted some of the latest developments in basic and applied laccase research with an emphasis on laccase-mediated bioremediation of pharmaceuticals, especially antibiotics. Pharmaceuticals are a broad class of emerging organic contaminants that are recalcitrant and prevalent. The recent surge in the relevant literature justifies a short review on the topic. Since low laccase yields in natural and genetically modified hosts constitute a bottleneck to industrial-scale applications, we also accentuated a genus of laccase-producing white-rot fungi, Cerrena, and included a discussion with regards to regulation of laccase expression.

An optimized SPE-LC-MS/MS method for antibiotics residue analysis in ground, surface and treated water samples by response surface methodology- central composite design

BACKGROUND

Antibiotic residues are being constantly identified in environmental waters at low concentration. Growing concern has been expressed over the adverse environmental and human health effects even at low concentration. Hence, it is crucial to develop a multi-residues analytical method for antibiotics to generate a considerable dataset which are necessary in the assessment of aquatic toxicity of environmental waters for aquatic organisms and human health. This work aimed to develop a reliable and sensitive multi-residue method based on high performance liquid chromatography coupled with quadrupole-linear ion trap tandem mass spectrometry (HPLC-MS-MS). The method was optimized and validated for simultaneous determination of four classes of antibiotics including, β-lactam, macrolide, fluoroquinolone and nitro-imidazole in treated, ground and surface water matrices.

METHODS

In order to optimize the solid phase extraction process, main parameters influencing the extraction process including, pH, the volume of elution solvent and the amount of Na₄EDTA were evaluated. The optimization of extraction process was carried out by response surface methodology using central composite design. Analysis of variance was performed for nine target antibiotics using response surface methodology.

RESULTS

The extraction recoveries were found to be sensitive to the independent variables of pH, the volume of elution solvent and the amount of Na₄EDTA. The extraction process was pH-dependent and pH was a significant model term in the extraction process of all target antibiotics. Method validation was performed in optimum operation conditions in which the recoveries were obtained in the range of 50-117% for seven antibiotics in spiked treated and ground water samples and for six antibiotics in spiked river water samples. Method validation parameters in terms of method detection limit were obtained in the range of 1-10 ng/L in treated water, 0.8-10 ng/L in the ground water and 0.8-25 ng/L in river water, linearity varied from 0.95 to 0.99 and repeatability in term of relative standard deviation values was achieved less than 10% with the exception for metronidazole and ceftriaxone. The developed method was applied to the analysis of target antibiotics in treated, ground and surface water samples.

CONCLUSIONS

Target antibiotics were analyzed in different water matrices including treated, ground and river water. Seven out of nine antibiotics were detected in Kan River and Firozabad Ditch water samples, although none of them were detected in treated water and ground water samples.

Studies on the laccase-mediated decolorization, kinetic, and microtoxicity of some synthetic azo dyes

BACKGROUND

Enzymatic elimination of synthetic dyes, one of the most environmentally hazardous chemicals, has gained a great interest during the two last decades. The present study was performed to evaluate the decolorization and detoxification potential of the purified laccase of Paraconiothyrium variabile in both non-assisted and hydroxybenzotriazole-aided form against six azo dyes.

RESULTS

The obtained results showed that Acid Orange 67, Disperse Yellow 79, Basic Yellow 28, Basic Red 18, Direct Yellow 107, and Direct Black 166 were decolorized up to 65.3, 53.3, 46.7, 40.7, 34, and 26.2 %, respectively, after 1 h treatment with laccase (0.5 U/mL). Addition of HBT up to 5 mM enhanced decolorization percent of all the investigated dyes. The results of kinetic study introduced the monoazo dye of Acid Orange 67 as the most suitable substrate for laccase with K m of 0.49 mM and V max of 189 mmol/min/mg. Evaluation the toxic effect of laccase-treated dye sample based on the growth inhibition of standard bacterial strains revealed decrease in toxicity of all applied dyes after treatment by laccase.

CONCLUSIONS

Application of the P. variabile laccase as biocatalyst efficiently decreased the toxicity of all studied synthetic azo dyes.