Aerosols modification with H2O2 reduces airborne contamination by dental handpieces

The Effect of Hydrogen Peroxide Colloidal-Ag Used in Dental Unit Waterline on Shear Bond Strength of Orthodontic Brackets

BACKGROUND

The quality of the water passing through the water lines is crucial to dental procedures. Studies on bracket adhesion of hydrogen peroxide colloidal-Ag, which is widely used to prevent biofilm formation, are limited in the literature.

AIM

To determine whether disinfecting the dental units' waterlines (DUW) with hydrogen peroxide colloidal-Ag has any effect on the shear bond strength (SBS) of orthodontic brackets bonded to enamel.

MATERIALS AND METHODS

Sixty premolar teeth were divided randomly into two groups. The study and control groups consists of 30 teeth that were etched for 30 seconds with 37% phosphoric acid. Study groups washed with hydrogen peroxide colloidal-Ag water and the control group washed with municipal water. Transbond XT adhesive system was used to bond stainless steel brackets on all the teeth. A 300-g force was applied using a tension gauge to ensure a uniform adhesive thickness and light cured with 6 seconds. The SBS was quantified by means of a universal testing machine. The residual adhesive on the enamel surface was evaluated after debonding using the adhesive remnant index (ARI).

RESULTS

The t-test results indicated that there were no significant differences in the SBS. The comparison of the results of ARI scores was found statistically insignificant.

CONCLUSION

It has been found that hydrogen peroxide colloidal-Ag, which is used to reduce the amount of biofilm in DUW, does not have a negative effect on the adhesion of the brackets.

Effect of open windows on airborne contamination and its topographical distribution in the dental operatory

Aerosols produced by dental handpieces represent a permanent risk of disease transmission in the dental environment. The current study evaluated the effects of natural ventilation (open windows) on Streptococcus mutans airborne contamination by dental handpieces in simulated clinical conditions. A dental phantom was placed on a dental chair at a standard university dental clinic operatory. An S. mutans suspension was infused into the phantom's mouth while an operator performed standardized dental procedures using low (contra-angle) and high speed (turbine) dental handpieces or an ultrasonic scaler, with windows open or closed. Selective medium Petri dishes were placed in 18 sites of the operatory environment to evaluate contamination topographically. Sites were clustered as: wall, floor, ceiling, dental chair, and cabinet. Contamination was expressed as log10 CFU/cm2 . A linear mixed model analysis was used, nesting the sites within each ventilation and handpiece combination. Open windows significantly reduced contamination. The high-speed handpiece provided the highest contamination, followed by the ultrasonic scaler and the low-speed handpiece. Contamination values were much smaller at the ceiling, and much larger at the chair. Opening windows produced more homogeneous contamination of the operatory compared to closed windows. Natural ventilation during dental procedures decreases contamination and affects its topographical distribution.

Evaluation of aerosols in a simulated orthodontic debanding procedure

Dental practitioners may be at risk for exposure to severe acute respiratory syndrome corona virus 2 when performing aerosol generating procedures. Though recent evidence suggests that coronavirus may be transmitted through aerosol generating procedures, it is unknown whether common procedures performed in dental clinics generate aerosol. The aim of this study was to simultaneously quantify airborne concentrations of the bacteriophage MS2 near the oral cavity of a dental mannequin and behind personal protective equipment (i.e., face shield) of the practitioner during a simulated orthodontic debanding procedure. A deband was performed eight times on a dental mannequin. Optical particle counters and SKC Biosamplers were used to measure particle concentration and to collect virus aerosol generated during the procedure, both near the oral cavity and behind the orthodontists face shield. A plaque assay was used to determine the viable virus airborne concentration. When comparing the two measuring locations, near the oral cavity and behind the clinician's face shield, there was no statistically significant difference of virus concentrations or particle size distribution. This study suggests that debanding under these conditions generates live virus aerosol and a face shield does not provide increased protection from virus aerosol, but does provide some protection against splatter during the procedure.

Waterline Disinfectants Reduce Dental Bioaerosols: A Multitracer Validation

Oral microbes are dispersed during dental treatment and reduction methods have been proposed, but dental unit waterline (DUWL) disinfectants have received little attention; specifically, the effect on viruses has not been studied. This study aims to 1) investigate the effect of DUWL disinfectants on viral dispersion in dental bioaerosols and 2) establish a dual-tracer system using live bacteriophage and fluorescein supported by optical particle measurement. Bacteriophage MS2 was used as a viral tracer and fluorescein as a fluorescent tracer. Validation experiments were conducted to exclude interference of one tracer with the other or of DUWL disinfectants on detection methods. Simulated “saliva” containing the tracers was infused into the mouth of a dental mannequin during 10-min dental procedures with an air turbine handpiece (n = 3 replicates). Aerosols and droplets were sampled in an enclosed dental operatory using air samplers and settlement onto sterile filter papers. Bacteriophage was quantified using plaque assays and reverse transcription quantitative polymerase chain reaction (RT-qPCR). Fluorescein was quantified fluorometrically. The effect of DUWL disinfectants on total aerosol concentration was assessed in separate experiments using an optical particle counter. DUWL disinfectants reduced bacteriophage viability, and interference between tracers was not observed. In simulated clinical procedures, the disinfectant ICX reduced bacteriophage detection substantially (P < 0.001; 2-way analysis of variance). MS2 RNA was detected in all experimental samples but not negative controls. Samples positive on RT-qPCR but not plaque assays may indicate that virions at distant sites are nonviable. Fluorescein tracer showed good agreement with the bacteriophage tracer. DUWL disinfectants designed for continuous presence in irrigants reduce the dispersion of viable virus in dental bioaerosols during simulated procedures. Their use may therefore be important for routine infection control and as a mitigation factor during infectious disease outbreaks. Future studies should explore this using a range of viruses and other microbes.

On the Problem of Optimal Microbiological Decontamination of Air Environment and Surfaces

Modern civilization, providing economic and social progress, at the same time objectively creates—sometimes close to ideal—conditions for the spread of various infections. The catastrophic consequences of the SARS-CoV-2 pandemic clearly indicate that homo sapiens appeared to be unable to effectively resist the onslaught of the coronavirus. The purpose of this publication is an attempt to fill the gap in the development of effective methods and means for microbiological decontamination that are optimal in terms of critical parameters. The observational data indicate that a significant number of SARS-CoV-2 coronavirus infections occur by air without a direct contact with the source, including over a long time interval. Precipitation helps to cleanse the air from pollutants and viruses, reducing noncontact contamination, which additionally brings up to date the problem of optimal microbiological decontamination of the air environment and surfaces. A thermodynamic approach has been used to optimize microbiological sterilization. It is shown that irreversible chemical oxidation reactions are the shortest way to achieve sterility, and they are capable of providing high reliability of decontamination. It has been established that oxygen is an optimal oxidant, including from the point of view of ecology, since its reactive forms harmoniously fit into natural exchange cycles. The optimal method for obtaining reactive oxygen species for disinfection is the use of low-temperature (“cold”) plasma, which provides the energy-efficient generation of oxidative reactive forms: atomic oxygen (O), ozone (O₃), hydroxyl radical (^•OH), hydrogen peroxide (H₂O₂), superoxide (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{O}}_{2}^{ - }$$\end{document}), and singlet oxygen O₂(a¹Δ_g). Due to a short lifetime for most of the above forms outside the plasma applicator, objects remote from the plasma generator should be sterilized with ozone (O₃), the minimum lifetime of which is quite long. It has been substantiated that the microwave method of generating oxygen plasma is optimal for energy-efficient ozone production. A modular principle of generation is proposed for varying the productivity of ozone-generating units over a wide range. The module has been developed on the basis of an adapted serial microwave oven, in which a non-self-sustaining microwave discharge is maintained thanks to ionizers (igniters), including those based on radiating radionuclides-emitters. In case of massive contamination of surfaces, it is advisable—in addition to ozone (O₃) air disinfecting—to use aqueous solutions of hydrogen peroxide (H₂O₂). It is essential that these reactive oxygen species for disinfecting objects remote from the plasma generator are highly efficient and, at the same time, environmentally neutral. Reliable and affordable personal protective equipment is proposed for activities in zones of increased ozone concentration. The considered optimal means of disinfection can be applicable not only in medicine but also adapted for numerous practices in agriculture, industry, and everyday life.

Dental Mitigation Strategies to Reduce Aerosolization of SARS-CoV-2

Limiting infection transmission is central to the safety of all in dentistry, particularly during the current severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. Aerosol-generating procedures (AGPs) are crucial to the practice of dentistry; it is imperative to understand the inherent risks of viral dispersion associated with AGPs and the efficacy of available mitigation strategies. In a dental surgery setting, crown preparation and root canal access procedures were performed with an air turbine or high-speed contra-angle handpiece (HSCAH), with mitigation via rubber dam or high-volume aspiration and a no-mitigation control. A phantom head was used with a 1.5-mL min-1 flow of artificial saliva infected with Φ6-bacteriophage (a surrogate virus for SARS-CoV-2) at ~108 plaque-forming units mL-1, reflecting the upper limits of reported salivary SARS-CoV-2 levels. Bioaerosol dispersal was measured using agar settle plates lawned with the Φ6-bacteriophage host, Pseudomonas syringae. Viral air concentrations were assessed using MicroBio MB2 air sampling and particle quantities using Kanomax 3889 GEOα counters. Compared to an air turbine, the HSCAH reduced settled bioaerosols by 99.72%, 100.00%, and 100.00% for no mitigation, aspiration, and rubber dam, respectively. Bacteriophage concentrations in the air were reduced by 99.98%, 100.00%, and 100.00% with the same mitigations. Use of the HSCAH with high-volume aspiration resulted in no detectable bacteriophage, both on nonsplatter settle plates and in air samples taken 6 to 10 min postprocedure. To our knowledge, this study is the first to report the aerosolization in a dental clinic of active virus as a marker for risk determination. While this model represents a worst-case scenario for possible SARS-CoV-2 dispersal, these data showed that the use of HSCAHs can vastly reduce the risk of viral aerosolization and therefore remove the need for clinic fallow time. Furthermore, our findings indicate that the use of particle analysis alone cannot provide sufficient insight to understand bioaerosol infection risk.

Oral Manifestations of COVID-19 in Hospitalized Patients: A Systematic Review

Background: COVID-19 disease first appeared in 2019 and quickly spread worldwide, causing a global pandemic. The oral cavity represents a target of SARS-CoV-2, and oral lesions are observed in both non-hospitalized and hospitalized patients. This systematic review aims to investigate the frequency of oral manifestations in COVID-19 hospitalized patients. Methods: An electronic search was conducted in PubMed, Scopus, and Web of Science databases, including articles published up to September 2021. The review protocol was based on PRISMA-P. The risk of bias of the studies was assessed using the Joana Briggs Institute. The certainty of evidence was assessed using the GRADE instrument. Results: Fifty-nine articles were included: 19 case reports, 17 case series, 2 case-control studies, 13 cross-sectional studies, 4 observational studies, and 4 retrospective studies. Oral ulcers, cheilitis, and tongue lesions were more common in patients before hospitalization, while perioral pressure ulcers, macroglossia, blisters, and oral candidiasis were more recurrent in patients during hospitalization. The first could be related directly to COVID-19, while the latter could be caused by medical devices, treatments, prone position, and immunological impairment. Conclusions: An accurate oral examination during the hospital admission of all confirmed COVID-19 cases is encouraged to recognize oral early manifestations and to apply appropriate treatments.

Virus transmission by ultrasonic scaler and its prevention by antiviral agent: an in vitro study

Background

It is well recognized that dental procedures represent a potential way of infection transmission. With the COVID‐19 pandemic, the focus of dental procedure associated transmission has rapidly changed from bacteria to viruses. The aim was to develop an experimental setup for testing the spread of viruses by ultrasonic scaler (USS) generated dental spray and evaluate its mitigation by antiviral coolants.

Methods

In a virus transmission tunnel, the dental spray was generated by USS with saline coolant and suspension of Equine Arteritis Virus (EAV) delivered to the USS tip. Virus transmission by settled droplets was evaluated with adherent RK13 cell lines culture monolayer. The suspended droplets were collected by a cyclone aero‐sampler. Antiviral activity of 0.25% NaOCl and electrolyzed oxidizing water (EOW) was tested using a suspension test. Antiviral agents' transmission prevention ability was evaluated by using them as a coolant.

Results

In the suspension test with 0.25% NaOCl or EOW, the TCID50/mL was below the detection limit after 5 seconds. With saline coolant, the EAV‐induced cytopathic effect on RK13 cells was found up to the distance of 45 cm, with the number of infected cells decreasing with distance. By aero‐sampler, viral particles were detected in concentration ≤4.2 TCID50/mL. With both antiviral agents used as coolants, no EAV‐associated RK‐13 cell infection was found.

Conclusion

We managed to predictably demonstrate EAV spread by droplets because of USS action. More importantly, we managed to mitigate the spread by a simple substitution of the USS coolant with NaOCl or EOW.

Air Quality in a Dental Clinic during Er:YAG Laser Usage for Cavity Preparation on Human Teeth-An Ex-Vivo Study

Chemical air pollution in dental clinics consists of the emission of gases and particulate matter (PM), both generated by dental equipment and tooth tissues. One basic application of Erbium Laser devices is cavity preparation on human teeth due to its strong affinity to water and hydroxyapatite. The objective of this study was the evaluation of indoor air quality during the application of an Er:YAG laser, as a dentin removal instrument, in a Dental Clinic. Particulate Matter (PM) was measured using the standard method of EN legislation. In order to measure total Volatile Organic compounds (VOCs), a portable monitor was used. In the first experiment, PM10 and PM2.5 concentrations were increased by approximately 10 and 15 times, respectively. From the second experiment it can be concluded that neither of the measured particle concentrations exceeded the recommended indoor limit values while windows were open, although laser influence was still detectable. Within the limitations applied herein, it was found that Er:YAG laser activity for hard dental tissue removal was associated with high PM and TVOCs concentration values in the working environment, under insufficient or no ventilation. Physical ventilation in the aforementioned setting proved to be an important key factor in improving air quality, as both PM and TVOCs concentrations decreased significantly.

Optimizing Safe Dental Practice During the COVID-19 Pandemic: Recommendations Based on a Guide Developed for Dental Practices in China

The current global coronavirus disease 2019 (COVID-19) outbreak is still exerting severe global implications, and its development in various regions is complex and variable. The high risk of cross-infection poses a great challenge to the dental practice environment; it is therefore urgent to develop a set of pandemic prevention measures to ensure dental practice safety during the COVID-19 outbreak. Therefore, we combined the epidemiological characteristics of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), public emergency measures for COVID-19, characteristics of dental practice, and relevant literature reports to develop a set of dynamic practice measures for dental practices in high-, medium-, and low-risk areas affected by COVID-19. This will help dental practices to achieve standard prevention and ensure their safe and smooth operation during the pandemic. It is hoped that these measures will provide a reference basis for dental hospitals and dental clinics in their care and pandemic prevention work.