Current and next-generation formulation strategies for inactivated polio vaccines to lower costs, increase coverage, and facilitate polio eradication

Immune persistence after different polio sequential immunization schedules in Chinese infants

Trivalent oral poliovirus vaccine (tOPV) has been withdrawn and instead an inactivated poliovirus vaccine (IPV) and bivalent type 1 and type 3 OPV (bOPV) sequential immunization schedule has been implemented since 2016, but no immune persistence data are available for this polio vaccination strategy. This study aimed to assess immune persistence following different polio sequential immunization schedules. Venous blood was collected at 24, 36, and 48 months of age from participants who had completed sequential schedules of combined IPV and OPV in phase III clinical trials. The serum neutralizing antibody titers against poliovirus were determined, and the poliovirus-specific antibody-positive rates were evaluated. A total of 1104 participants were enrolled in this study. The positive rates of poliovirus type 1- and type 3-specific antibodies among the sequential immunization groups showed no significant difference at 24, 36, or 48 months of age. The positive rates of poliovirus type 2-specific antibody in the IPV-IPV-tOPV group at all time points were nearly 100%, which was significantly higher than the corresponding rates in other immunization groups (IPV-bOPV-bOPV and IPV-IPV-bOPV). Immunization schedules involving one or two doses of IPV followed by bOPV failed to maintain a high positive rate for poliovirus type 2-specific antibody.

Immune Persistence following Primary Immunization and the Immunogenicity and Safety of a Booster Dose of a Multidose Sabin Strain-Based Inactivated Polio Vaccine in Infants Aged 18 Months

BACKGROUND

The multidose Sabin-strain inactivated poliovirus vaccine (sIPV) has the potential to significantly aid in the eradication of poliomyelitis, particularly in low- and middle-income countries. As part of a phase III clinical trial in which infants were given three doses of primary immunization at 2, 3, and 4 months of age, this study aimed to evaluate immune persistence following primary immunization, as well as the safety and immunogenicity of a booster of the 5-dose sIPV in infants aged 18 months.

METHODS

Infants aged 18 months were given one booster dose of 5-dose sIPV in stage one, which was open-label. Unblinding was performed for stage two after completing primary immunization, which was randomized, blinded, and controlled; infants aged 18 months in the test group I-III, IPV group, and single-dose sIPV group were given one booster dose of 5-dose sIPV, conventional IPV, and single-dose sIPV, respectively, in stage two.

RESULTS

This study included 1438 infants in the immune persistence and safety set and 1387 infants in the booster per-protocol set. Fourteen months after primary immunization, the seropositivity rates (≥1:8) for types 1-3 were 100%, 99.88%, and 99.53% in the 5-dose sIPV groups; 100%, 98.97%, and 97.23% in the IPV group; and 99.66%, 100%, and 99.66% in the single-dose sIPV group. A total of 30 days after booster immunization, the seropositivity rates (≥1:8) of 3 serotypes in all the groups reached 100%. The geometric mean titers of neutralizing antibodies for types 1-3 in the 5-dose sIPV group were 9962.89, 10273, and 7870.21, with geometric mean increases of 15.76, 33.15, and 24.5, compared to the pre-booster level. The overall incidence of adverse reactions was 8.97%, with fever being the most common, observed at rates of 7.1%, 5.52%, and 7.96% in the 5-dose sIPV, IPV, and single-dose groups, respectively (p = 0.4845).

CONCLUSIONS

The 5-dose sIPV has shown promising immune persistence and robust immune response following a booster immunization, coupled with an acceptable safety profile.

Is it time to switch to a formulation other than the live attenuated poliovirus vaccine to prevent poliomyelitis?

The polioviruses (PVs) are mainly transmitted by direct contact with an infected person through the fecal-oral route and respiratory secretions (or more rarely via contaminated water or food) and have a primary tropism for the gut. After their replication in the gut, in rare cases (far less than 1% of the infected individuals), PVs can spread to the central nervous system leading to flaccid paralysis, which can result in respiratory paralysis and death. By the middle of the 20th century, every year the wild polioviruses (WPVs) are supposed to have killed or paralyzed over half a million people. The introduction of the oral poliovirus vaccines (OPVs) through mass vaccination campaigns (combined with better application of hygiene measures), was a success story which enabled the World Health Organization (WHO) to set the global eradication of poliomyelitis as an objective. However this strategy of viral eradication has its limits as the majority of poliomyelitis cases today arise in individuals infected with circulating vaccine-derived polioviruses (cVDPVs) which regain pathogenicity following reversion or recombination. In recent years (between January 2018 and May 2023), the WHO recorded 8.8 times more cases of polio which were linked to the attenuated OPV vaccines (3,442 polio cases after reversion or recombination events) than cases linked to a WPV (390 cases). Recent knowledge of the evolution of RNA viruses and the exchange of genetic material among biological entities of the intestinal microbiota, call for a reassessment of the polio eradication vaccine strategies.

mRNA and Adenoviral Vector Vaccine Platforms Utilized in COVID-19 Vaccines: Technologies, Ecosystem, and Future Directions

New technological platforms, such as mRNA and adenoviral vector vaccines, have been utilized to develop coronavirus disease 2019 (COVID-19) vaccines. These new modalities enable rapid and flexible vaccine design and cost-effective and swift manufacturing, effectively combating pandemics caused by mutating viruses. Innovation ecosystems, including universities, startups, investors, and governments are crucial for developing these cutting-edge technologies. This review summarizes the research and development trajectory of these vaccine technologies, their investments, and the support surrounding them, in addition to the technological details of each technology. In addition, this study examines the importance of an innovation ecosystem in developing novel technologies, comparing it with the case of Japan, which has lagged behind in COVID-19 vaccine development. It also explores the direction of vaccine development in the post-COVID-19 era.

Formulation development and comparability studies with an aluminum-salt adjuvanted SARS-CoV-2 spike ferritin nanoparticle vaccine antigen produced from two different cell lines

The development of safe and effective second-generation COVID-19 vaccines to improve affordability and storage stability requirements remains a high priority to expand global coverage. In this report, we describe formulation development and comparability studies with a self-assembled SARS-CoV-2 spike ferritin nanoparticle vaccine antigen (called DCFHP), when produced in two different cell lines and formulated with an aluminum-salt adjuvant (Alhydrogel, AH). Varying levels of phosphate buffer altered the extent and strength of antigen-adjuvant interactions, and these formulations were evaluated for their (1) in vivo performance in mice and (2) in vitro stability profiles. Unadjuvanted DCFHP produced minimal immune responses while AH-adjuvanted formulations elicited greatly enhanced pseudovirus neutralization titers independent of ∼100%, ∼40% or ∼10% of the DCFHP antigen adsorbed to AH. These formulations differed, however, in their in vitro stability properties as determined by biophysical studies and a competitive ELISA for measuring ACE2 receptor binding of AH-bound antigen. Interestingly, after one month of 4°C storage, small increases in antigenicity with concomitant decreases in the ability to desorb the antigen from the AH were observed. Finally, we performed a comparability assessment of DCFHP antigen produced in Expi293 and CHO cells, which displayed expected differences in their N-linked oligosaccharide profiles. Despite consisting of different DCFHP glycoforms, these two preparations were highly similar in their key quality attributes including molecular size, structural integrity, conformational stability, binding to ACE2 receptor and mouse immunogenicity profiles. Taken together, these studies support future preclinical and clinical development of an AH-adjuvanted DCFHP vaccine candidate produced in CHO cells.

Correlating physicochemical and biological properties to define critical quality attributes of a rAAV vaccine candidate

Recombinant adeno-associated viruses (rAAVs) are a preferred vector system in clinical gene transfer. A fundamental challenge to formulate and deliver rAAVs as stable and efficacious vaccines is to elucidate interrelationships between the vector's physicochemical properties and biological potency. To this end, we evaluated an rAAV-based coronavirus disease 2019 (COVID-19) vaccine candidate that encodes the Spike antigen (AC3) and is produced by a commercially viable process. First, state-of-the-art analytical techniques were employed to determine key structural attributes of AC3, including primary and higher-order structures, particle size, empty/full capsid ratios, aggregates, and multi-step thermal degradation pathway analysis. Next, several quantitative potency measures for AC3 were implemented, and data were correlated with the physicochemical analyses on thermally stressed and control samples. Results demonstrate links between decreasing AC3 physical stability profiles, in vitro transduction efficiency in a cell-based assay, and, importantly, in vivo immunogenicity in a mouse model. These findings are discussed in the general context of future development of rAAV-based vaccine candidates as well as specifically for the rAAV vaccine application under study.

Effects of aluminum-salt, CpG and emulsion adjuvants on the stability and immunogenicity of a virus-like particle displaying the SARS-CoV-2 receptor-binding domain (RBD)

Second-generation COVID-19 vaccines with improved immunogenicity (e.g., breadth, duration) and availability (e.g., lower costs, refrigerator stable) are needed to enhance global coverage. In this work, we formulated a clinical-stage SARS-CoV-2 receptor-binding domain (RBD) virus-like particle (VLP) vaccine candidate (IVX-411) with widely available adjuvants. Specifically, we assessed the in vitro storage stability and in vivo mouse immunogenicity of IVX-411 formulated with aluminum-salt adjuvants (Alhydrogel™, AH and Adjuphos™, AP), without or with the TLR-9 agonist CpG-1018™ (CpG), and compared these profiles to IVX-411 adjuvanted with an oil-in-water nano-emulsion (AddaVax™, AV). Although IVX-411 bound both AH and AP, lower binding strength of antigen to AP was observed by Langmuir binding isotherms. Interestingly, AH- and AP-adsorbed IVX-411 had similar storage stability profiles as measured by antigen-binding assays (competitive ELISAs), but the latter displayed higher pseudovirus neutralizing titers (pNT) in mice, at levels comparable to titers elicited by AV-adjuvanted IVX-411. CpG addition to alum (AP or AH) resulted in a marginal trend of improved pNTs in stressed samples only, yet did not impact the storage stability profiles of IVX-411. In contrast, previous work with AH-formulations of a monomeric RBD antigen showed greatly improved immunogenicity and decreased stability upon CpG addition to alum. At elevated temperatures (25, 37°C), IVX-411 formulated with AH or AP displayed decreased in vitro stability compared to AV-formulated IVX-411and this rank-ordering correlated with in vivo performance (mouse pNT values). This case study highlights the importance of characterizing antigen-adjuvant interactions to develop low cost, aluminum-salt adjuvanted recombinant subunit vaccine candidates.

Threat of resurgence or hope for global eradication of poliovirus?

PURPOSE OF REVIEW

Recent outbreaks of poliomyelitis in countries that have been free of cases for decades highlight the challenges of eradicating polio in a globalized interconnected world beset with a novel viral pandemic. We provide an epidemiological update, advancements in vaccines, and amendments in public health strategy of poliomyelitis in this review.

RECENT FINDINGS

Last year, new cases of wild poliovirus type 1 (WPV1) were documented in regions previously documented to have eradicated WPV1 and reports of circulating vaccine-derived poliovirus type 2 (cVDPV2) and 3 (cVDPV3) in New York and Jerusalem made international headlines. Sequencing of wastewater samples from environmental surveillance revealed that the WPV1 strains were related to WPV1 lineages from endemic countries and the cVDPV2 strains from New York and Jerusalem were not only related to each other but also to environmental isolates found in London. The evidence of importation of WPV1 cases from endemic countries, and global transmission of cVDPVs justifies renewed efforts in routine vaccination programs and outbreak control measures that were interrupted by the COVID-19 pandemic. After the novel oral poliovirus vaccine type 2 (nOPV2) received emergency authorization for containment of cVDPV2 outbreaks in 2021, subsequent reduced incidence, transmission rates, and vaccine adverse events, alongside increased genetic stability of viral isolates substantiates the safety and efficacy of nOPV2. The nOPV1 and nOPV3 vaccines, against type 1 and 3 cVDPVs, and measures to increase accessibility and efficacy of inactivated poliovirus vaccine (IPV) are in development.

SUMMARY

A revised strategy utilizing more genetically stable vaccine formulations, with uninterrupted vaccination programs and continued active surveillance optimizes the prospect of global poliomyelitis eradication.