In vitro fecal microbiota modulation properties of pectin and xyloglucan from hazelnut (Corylus avellana L.) skin, an industrial byproduct, and their incorporation into biscuit formula

The aim of this study was to extract water-soluble dietary fibers (WSDFskin), pectin (PECskin), and xyloglucan (XGskin) from hazelnut skin and to determine their impacts on colonic microbiota and metabolic function. WSDFskin, PECskin, and XGskin were extracted by water, acid, and alkali treatments, respectively. Monosaccharide analysis revealed WSDFskin and PECskin were dominated by uronic acids, while the XGskin was found to contain xyloglucan- and pectin-associated sugars. In vitro fecal fermentation analysis showed that WSDFskin, PECskin, and XGskin are fermented to different microbial short-chain fatty acid profiles by identical microbiota. 16S rRNA sequencing demonstrated that PECskin promoted Faecalibacterium prausnitzii and Lachnospiraceae related operational taxonomic units (OTUs), which are recognized as beneficial members of the human gut, whereas WSDFskin and XGskin stimulated Bacteroides OTUs. Interestingly, increased abundances of F. prausnitzii and Lachnospiraceae OTUs in PECskin were higher than those in commercially available pectin. Finally, PECskin and XGskin were tested in a biscuit model and the results showed that either PECskin or XGskin can be incorporated into biscuit formulations without impacting physical, textural, and sensory properties of the final product. Overall, our results demonstrated that hazelnut skin, an industrial byproduct, can be utilized for the production of functional dietary fibers, especially pectin, to improve colonic health.

Biochemical Composition of Pumpkin Seeds and Seed By-Products

The goal of the current work was to assess the nutritional profile and phytochemical properties of cucurbit (Cucurbita maxima L.) seeds, seed oils and oil extraction by-products (e.g., seed-cakes). Our results suggest a high nutritional value for both cucurbit seeds and cucurbit cake, while γ-tocopherol was the richest compound, with traces of α, β and δ-tocopherol compounds also detected. Regarding the free sugars composition, there were recorded significant statistical differences between seeds and cucurbit seed-cake, although sucrose content was the highest for both matrices (1.97 and 2.9 g/100 g dw, respectively) followed by trehalose (0.26 and 0.25 g/100 g dw, respectively), fructose (0.20 and 0.34 g/100 g dw, respectively) and glucose (0.21 and 0.19 g/100 g dw, respectively). In terms of organic acids, oxalic was the only compound detected in seed cake (0.006 g/100 g dw), while in seeds only traces of oxalic and malic acid were detected. In relation to fatty acid composition, linolenic acid was the most abundant compound in both seeds and seed-cake (43.9% and 41.5%, respectively), while oleic acid (37.0% and 36.3%, respectively), palmitic acid (12.2% and 14.0%, respectively) and stearic acid (4.83% and 5.46%, respectively) were detected in lesser amounts. Moreover, polyunsaturated fatty acids (PUFA) were the major fatty acids class (44.5% and 42.3% in seeds and seed cake, respectively) compared to monounsaturated fatty acids (MUFA; 37.4% and 36.7% in seeds and seed cake, respectively) and saturated fatty acids (SFA; 18.1% and 21.0% in seeds and seed cake, respectively) which were detected in lower amounts. Furthermore, the tested extracts did not present any cytotoxic or hepatoxic activity at the maximum tested concentration (GI50 > 400 μg/mL), while seed oils presented satisfactory antimicrobial properties with inhibitory activity against the studied bacterial strains and fungi. Our findings provide valuable knowledge regarding the exploitation of pumpkin seeds and seed by-products as valuable natural sources of nutrients and phytochemicals in the food industry sector within the context of a circular economy.

Obtaining and evaluating of enzymatic extracts from hairless canary seed (CDC Maria) as gluten-free bread-improving agents

In this study, enzyme extracts were obtained from hairless canary seeds (CDC Maria) and used as gluten-free bread improvers. The enzyme extraction was done with a specific protein buffer solution and subsequent centrifugation. The supernatant was called crude enzyme extract, a fraction of this extract was refrigerated (CE) and another fraction was lyophilized (CEL). The lyoprotective effect of corn fiber (CEL + CF), maltodextrin (CEL + M), and inulin (CEL + I) was evaluated. Each enzyme extract was added to a gluten-free bread at 0.25%, 0.5%, 0.75% and 1% (w/w). The quality of the gluten-free bread was determined by external and internal characteristically, physical and sensory analysis: analysis of the lamella thickness, the shape factor of pores, the final volume, the aeration percentage, the texture profile analysis, the pore size distribution and shelf-life time. The results showed that the formulation with CEL at 0.5% (w/w) significantly improved the gluten-free bread quality properties, generating an increase of the final volume and aeration percentage, a reduction of the firmness, chewiness and sample aging, and a finer and more uniform crumb structure when compared to a control sample (P < 0.001). This study revealed the potential of a food-improving additive obtained from a natural origin with a high-level production in Argentina.

Extrusion assisted interaction of rice starch with rice protein and fibre: Effect on physicochemical, thermal and in-vitro digestibility characteristics

Rice starch has high digestibility due to its large carbohydrate content. Macromolecular enrichment of starch has the tendency to retard rate of starch hydrolysis. Hence, the current investigation was aimed to check the combined effect of extrusion assisted addition of rice protein (0, 10, 15 and 20 %) and fibre (0, 4, 8 and 12 %) to rice starch on physico-chemical and in-vitro digestibility characteristics of starch extrudates. It was observed from the study that 'a' and 'b' values, pasting temperature and resistant starch of starch blends and extrudates increased with the addition of protein and fibre. However, lightness value, swelling index, pasting properties and relative crystallinity of blends and extrudates decreased with the addition of protein and fibre. Maximum increase in thermal transition temperatures was observed for ESP₃F₃ extrudates due to absorption capacity of protein molecules which led to late onset of gelatinization. Therefore, enrichment of protein and fibre to rice starch during extrusion can be considered as a novel approach to reduce rate of rice starch digestion for catering nutritional requirements of diabetic population.

Physicochemical properties and in vitro hypoglycemic activities of hsian-tsao polysaccharide fractions by gradient ethanol precipitation method

Hsian-tsao polysaccharides fractions (HPs), including HP20, HP40, HP60, and HP80, were fractioned by gradient precipitation of 20 %, 40 %, 60 %, and 80 % (v/v) ethanol, respectively. Their physicochemical properties and in vitro hypoglycemic activities (inhibitory activities on α-amylase and α-glucosidase, glucose adsorption capacity, and glucose diffusion retardation) were determined. The results showed that, with ethanol upward, the average particle size, molecular weight, and apparent viscosity of HPs were decreased while carbohydrate and uronic acid contents, absolute zeta potential, and thermal stability were increased. Each of the HPs contained Rha, Ara, Gal, Xyl, Man, and GalA with different molar ratios, indicative of anionic heteropolysaccharides with uronic acid. HPs, with diverse structures and surface morphologies as proved by FTIR and SEM, whose solutions were pseudoplastic fluids, exhibited elastic behavior of weak gel networks at concentrations of >1 %. Moreover, HPs showed inhibitory activities on α-amylase and α-glucosidase, of which HP80 was the strongest. For α-amylase, HP20 and HP60 behaved as mixed inhibitors, while HP40 and HP80 were non-competitive. For α-glucosidase, HPs acted as mixed inhibitors. Additionally, HPs possessed glucose adsorption capacity and glucose diffusion retardation, with the best for HP20. These results suggested that HPs possessed hypoglycemic activities, which could be developed as functional food or hypoglycemic drugs.

Glycaemic Index of Gluten-Free Biscuits with Resistant Starch and Sucrose Replacers: An In Vivo and In Vitro Comparative Study

The glycaemic index (GI) is used to demonstrate the tendency of foods to increase blood glucose and is thus an important characteristic of newly formulated foods to tackle the rising prevalence of diabetics and associated diseases. The GI of gluten-free biscuits formulated with alternate flours, resistant starch and sucrose replacers was determined using in vivo methods with human subjects. The relationship between in vivo GI values and the predicted glycaemic index (pGI) from the in vitro digestibility-based protocols, generally used by researchers, was established. The in vivo data showed a gradual reduction in GI with increased levels of sucrose substitution by maltitol and inulin with biscuits where sucrose was fully replaced, showing the lowest GI of 33. The correlation between the GI and pGI was food formulation-dependent, even though GI values were lower than the reported pGI. Applying a correction factor to pGI tend to close the gap between the GI and pGI for some formulations but also causes an underestimation of GI for other samples. The results thus suggest that it may not be appropriate to use pGI data to classify food products according to their GI.

Dietary fiber in bakery products: Source, processing, and function

Bakery products are prevalently consumed foods in the world, and they have been regarded as convenient dietary vehicles for delivering nutritive ingredients into people's diet, of which, dietary fiber (DF) is one of the most popular items. The food industry attempts to produce fiber-enriched bakery products with both increasing nutritional value and appealing palatability. As many new sources of DFs become available, and consumers are moving towards healthier diets, studies of using these DFs as functional ingredients in baked goods are becoming vast. Besides, the nutrition value of DF is commonly accepted, and many investigations have also revealed the health benefits of fiber-enriched bakery products. Thus, this chapter presents an overview of (1) trends in supplementation of DF from various sources, (2) impact of DF on dough processing, quality and physiological functionality of bakery products, and (3) technologies used to improve the compatibility of DF in bakery products.

Retention of bioactive compounds during extrusion processing and storage

•

Significant retention of beta-glucans was reported in fortified extrudates.

•

Lowest rentention was found in extrudates fortified with oryzanol at high level.

•

In storage studies at higher relative humidities, lowest retention was observed.

•

L* and b* values decreased when extrudates were kept at high relative humidities.

•

a* value increased when extrudates were kept at high relative humidities.

Retention of bioactive compounds (beta-glucans, lignans and gamma oryzanol) was analyzed after extrusion and during storage period of three months under four relative humidities using saturated salt solutions such as potassium carbonate (43.26%), magnesium nitrate (52.60%), potassium chloride (84.36%) and potassium nitrate (93.58%). The control sample comprising a corn and rice flour blend (50 g each) was substituted with beta-glucans at 3 g/100 g and 6 g/100 g, flaxseed lignans at 6.67 g/kg and 11.67 g/kg and gamma oryzanol at 1.5 g/100 g and 3.0 g/100 g at low and high levels, respectively. After extrusion, beta-glucan was retained up to 82.67 and 90.83%, lignans were retained at 86.31 and 66.66% whereas retention of gamma oryzanol was 71.33 and 51.67% at low and high level of substitution, respectively. Retention of bioactive compounds was the lowest along with a decrease in L* and b* values and an increase in a* value was observed under higher relative humidity (84.36% and 93.58%) storage conditions.

Understanding gluten-free bread ingredients during ohmic heating: function, effect and potential application for breadmaking

Due to the absence of gluten, several challenges arise during gluten-free (GF) bread baking, affecting the mid-and-end-product quality. The main approach to overcome this issue is to combine certain functional ingredients and additives, to partially simulate wheat bread properties. In addition, the optimization of the baking process may contribute to improved product quality. A recent and very promising alternative to conventional baking is the use of ohmic heating (OH). Due to its volumetric and uniform heating principle, crumb development during baking and consequently bread volume is improved, which enhances the overall GF bread quality. Depending on the GF formulation, critical factors such as the electrical conductivity and viscosity of the batter may vary, which have a significant effect on the OH process performance. Therefore, this review attempts to provide a deeper understanding of the functionality of GF bread ingredients and how these may affect critical parameters during the OH processing.

A review combining emerging techniques with classical ones for the determination of biscuit quality: advantages and drawbacks

The production of biscuit and biscuit-like products has faced many challenges due to changes in consumer behavior and eating habits. Today's consumer is looking for safe products not only with fresh-like and pleasant taste, but also with long shelf life and health benefits. Therefore, the potentiality of the use of healthier fat and the incorporation of natural antioxidant in the formulation of biscuit has interested, recently, the attention of researchers. The determination of the biscuit quality could be performed by several techniques (e.g., physical, chemical, sensory, calorimetry and chromatography). These classical analyses are unfortunately destructive, expensive, polluting and above all very heavy, to implement when many samples must be prepared to be analyzed. Therefore, there is a need to find fast analytical techniques for the determination of the quality of cereal products like biscuits. Emerging techniques such as near infrared (NIR), mid infrared (MIR) and front face fluorescence spectroscopy (FFFS), coupled with chemometric tools have many potential advantages and are introduced, recently, as promising techniques for the assessment of the biscuit quality.

Effect of heat treatment and γ-irradiation on pasting, rheological, and fungal load of whole and dehulled millets

Millets are important food crops in food systems and application of physical treatments could improve the functional properties of millet-based products. Therefore, we investigated the effect of heat and γ-irradiation treatments on the pasting, rheological, and microbial load of whole and dehulled millets (sorghum, foxtail millet, and pearl millet). Moreover, similarity in treatment effect was evaluated by principal component analysis (PCA). The results revealed the significant (p < 0.05) decrease in pasting properties of whole and dehulled millets, except for pasting temperature (71.03 to 74.88 °C). Likewise, significantly (p < 0.05) decreased tendency was observed for all rheological properties, except for phase angle (0.05 to 0.30°) and yield point (13 to 5089). Samples showed a significant (p < 0.05) reduction in fungal growth (89.75 × 10⁴ to 4.46 × 10⁴ CFU/g) compared to control (110.30 × 10⁴ CFU/g). Moreover, samples individually formed 3 clusters (clusters 1: sorghum, 2: pearl millet, and 3: foxtail millet) based on pasting properties, which was confirmed by PCA. Therefore, the findings concluded that the effect of heat and γ-irradiation would be necessary to decrease pasting, rheological, and no microbial growth characteristics of dehulled and whole millets for the development of specific millet-based food products.

Use of Underexploited Flours for the Reduction of Glycaemic Index of Gluten-Free Biscuits: Physicochemical and Sensory Characterization

The type and the amount of starch present in bakery products affect their glycaemic index. The control of glycaemic index in our diet can be relevant to reduce the risk of type 2 diabetes and heart diseases. The use of alternative flours to rice, maize, and their starches may improve the nutritional quality of gluten-free baked goods by reducing the glycaemic index. This work aimed at the formulation of satisfactory gluten-free biscuits by using underexploited flour mixes (from cereals, pseudocereals, and legumes), at the evaluation of their physical properties, starch digestibility and subsequent estimation of the glycaemic index. The presence of chickpea flour increased biscuit hardness and gluten-free flours darkened biscuit surface. The greatest differences in starch composition and its digestion were found between gluten-free samples and wheat-containing control. Experimental biscuits had also a lower predicted glycaemic index compared to commercial products, whereas experimental formulations presented similar values between each other. Consumers’ acceptance and sensory profiling by Check All That Apply questionnaire were carried out. All formulations but one were above the acceptance threshold (50); crumbliness and easiness to swallow were drivers of acceptance, whereas sandiness exerted a negative impact on liking score.

Effect of sucrose replacement and resistant starch addition on textural properties of gluten-free doughs and biscuits

There is a need to develop low-sugar healthy products. The aim of this research was to evaluate the effect of maltitol and inulin as sucrose replacement alongside resistant starch (RS) and green banana flour (GBF) on the texture and physical properties of gluten-free doughs and biscuits formulated with buckwheat, sorghum and lentil flours. These properties are important to predict the dough workability, how easy the biscuits could be mass-produced and determine consumers’ acceptability. Results showed that partial and complete substitution of sucrose could be achieved and appropriate concentration of resistant starch or green banana flour contributed to better dough and biscuit texture. RS content showed the biggest influence on dough stickiness and biscuit hardness and could be used to correct the negative effect of sucrose replacement and to maximise both the dough processability and biscuit acceptability.

Sorghum-Insect Composites for Healthier Cookies: Nutritional, Functional, and Technological Evaluation

Protein-energy malnutrition (PEM) is a major health concern in sub-Saharan Africa (SSA). Relying on unexploited and regionally available rich sources of proteins such as insects and sorghum might contribute towards addressing PEM among at-risk populations. Insects are high in nutrients, especially protein, and are abundant in SSA. Sorghum is adapted to the tropical areas of SSA and as such it is an appropriate source of energy compared with temperate cereals like wheat. It is necessary to assess whether cookies fortified with sorghum and termite would be suitable for use in addressing PEM in SSA. Whole grain sorghum meal and termite meal were mixed at a 3:1 ratio (w/w sorghum:termite) to form a sorghum-termite meal blend. Composite cookies were prepared where the sorghum-termite blend partially substituted wheat flour at 20%, 40%, and 60% (sorghum-termite blend:wheat flour (w/w). The functional and nutritional qualities of the cookies were assessed. Compared with the control (100% wheat flour), the cookies fortified with sorghum and termite had about double the quantity of protein, minerals, and amino acids. However, with increased substitution level of the sorghum-termite blend, the spread factor of the cookies decreased. There is a potential to incorporate sorghum and termite in cookies for increased intake of several nutrients by communities that are vulnerable to nutrient deficiencies, especially PEM.

Effects of the addition of waxy and normal hull-less barley flours on the farinograph and pasting properties of composite flours and on the nutritional value, textural qualities, and in vitro digestibility of resultant breads

Hull-less barley (HLB), especially waxy HLB, contains many physiologically active ingredients; however, its poor processing performance and end-product quality are unfavorable. In this study, 80% waxy or normal HLB wholegrain flour (WGF) and 20% wheat flour were used for baking bread. The farinograph and pasting properties of composite powders, and the nutritional value, textural properties, and in vitro hydrolysis of resultant breads were evaluated. The addition of a high proportion of HLB WGFs significantly increased the nutritional value of breads, especially the β-glucan contents of waxy HLB breads. The addition of HLB WGFs and a suitable amount of wheat gluten led to a lower degree of softening of HLB bread flours but improved its farinograph characteristics, such as higher water absorption rate, development time, stability time, and farinograph quality number. Although the sensory profiles of HLB breads were considerably lower than those of wheat bread, they still received a good overall acceptability from a panel of sensory evaluators. HLB breads, particularly the waxy types, exhibited higher hardness, gumminess, chewiness, and lower specific volume, glycemic index and equilibrium concentration in starch hydrolysis. After baking, the starch crystallinity of dough changed from A to V type, and the relative crystallinity decreased. Overall, waxy HLB breads had more nutritional value than normal HLB breads. Higher β-glucan and total dietary fiber content in HLB might have a positive effect on the nutritional value of the resultant breads. However, high β-glucan and total dietary fiber was also accompanied by a negative effect on the sensory quality and processing performance of the end product. PRACTICAL APPLICATION: The composite flour with 80 g hull-less barley wholegrain flour, 20 g wheat flour, and 30 g wheat gluten can be substituted in breadmaking. Compared to wheat bread, hull-less barley bread exhibited different but acceptable sensory properties and had more nutritional value, particularly the waxy one. Therefore, a high proportion of hull-less barley could be recommended for bread production.

The Combined Effect of Blackcurrant Powder and Wholemeal Flours to Improve Health Promoting Properties of Cookies

A diet with high glycaemic index, which causes rapid spikes in blood sugar level, can lead to disorders such as significantly increased risk for type 2 diabetes, cardiovascular disease and obesity. These conditions are also linked to the progression of cognitive decline and neurodegenerative diseases including Alzheimer's disease. Blackcurrant powder (BC) is a rich source of dietary fibre and bioactive compounds. Wholemeal wheat, barley and oat flours contain high amount of fibre. In this study, a model food (cookie) was developed and used to investigate the in vitro glycaemic glucose equivalent and antioxidant activities of the cookies made with three different wholemeal flours (wheat, barley and oat) with different replacement levels (5, 10 and 15%) of blackcurrant powder. Increasing the proportion of blackcurrant powder in the cookie resulted in a significant (P < 0.05) decrease in glucose release after in vitro digestion compared to the control. In addition, incorporation of blackcurrant powder in cookies up to 15% increased the antioxidant capacity. The combination of wholemeal flour and the bioactive compound rich blackcurrant has the potential to improve the nutritional value and reduce the glycaemic index of such foods.

Applications of prebiotics in food industry: A review

Benefits of prebiotics for stimulating a healthy intestinal tract are well known. From suppression of pathogens to proliferation of indigenous bacteria of intestines, prebiotics have it all. Since the research on the scope of prebiotics is expanding, new applications are coming up every day thus upgrading the choices consumer has for a healthy living. Incorporation of prebiotics in a wide range of products that food industry offers on shelf is an innovative way to replace fat and sugars along with enhancing the mouthfeel by providing better tongue lubrication. In some cases, the thermal stability of the product is improved along with other sensory, textural and physiological benefits. This paper gives an overview of the various prebiotics available from different sources and their applications in various segments of food industry, notably dairy, beverage, processed fruit-vegetable, bakery, confectionary, extruded snack, sweetener, infant formula, pet food and livestock industry. The effects observed on addition of various prebiotics are also elaborated.

The Effect of Astaxanthin-Rich Microalgae "Haematococcus pluvialis" and Wholemeal Flours Incorporation in Improving the Physical and Functional Properties of Cookies

Marine-based food supplements can improve human nutrition. In an effort to modulate glycaemic response and enhance nutritional aspects, marine-derived algal food rich in astaxanthin was used in the formulation of a model food (wholemeal cookie). Astaxanthin substitution of cookies made from three flours (wheat, barley and oat) demonstrated a significant reduction in the rate of glucose released during in vitro digestion together with an increase in the total phenolic content (TPC) and antioxidant capacity of the food. The significantly (p < 0.005) lower free glucose release was observed from cookies with 15% astaxanthin, followed by 10% and then 5% astaxanthin in comparison with control cookies of each flour. Total phenolic content, DPPH radical scavenging and Oxygen Radical Absorbance Capacity (ORAC) value also notably increased with increase in astaxanthin content. The results evidence the potential use of microalgae to enhance the bioactive compounds and lower the glycaemic response of wholemeal flour cookie.

Quality characteristics of gluten free bread from barnyard millet-soy flour blends

The effects of formulation of leavened bread by using varying levels (for 50 g base flour) of soy flour-barnyard millet blends (with 5.74, 6.25, 7, 7.75 and 8.26 g of soy flour), yeast (1.83, 2, 2.25, 2.5 and 2.67 g) and salt (0.63, 0.8, 1.05, 1.30 and 1.47 g) on textural, colour and specific volume were determined. A central composite rotatable design of response surface methodology was used to plan the experiments. The second order models obtained were observed to be statistically significant and capable of demonstrating the effects input variables on responses. All the textural properties were affected significantly by amount of soy flour and yeast in the dough. Soy flour had a significant effect on the colour of the bread making it more brown. Interaction of soy flour and yeast affected the specific volume to maximum extent. Two-tailed t test established that the efficacy of the models as no significant was observed between the predicted and the actual values.

Nutritional and sensory characteristics of gluten-free quinoa (Chenopodium quinoa Willd)-based cookies development using an experimental mixture design

The aim of this study was to develop a gluten-free formulation of quinoa (Chenopodium quinoa Willd.)-based cookies using experimental design of mixture to optimize a ternary mixture of quinoa flour, quinoa flakes and corn starch for parameters of colour, specific volume and hardness. Nutritional and sensory aspects of the optimized formulation were also assessed. Corn starch had a positive effect on the lightness of the cookies, but increased amounts of quinoa flour and quinoa flakes in the mixture resulted in darker product. Quinoa flour showed a negative effect on the specific volume, producing less bulky cookies, and quinoa flour and quinoa flakes had a positive synergistic effect on the hardness of the cookies. According the results and considering the desirability profile for colour, hardness and specific volume in gluten-free cookies, the optimized formulation contains 30 % quinoa flour, 25 % quinoa flakes and 45 % corn starch. The quinoa-based cookie obtained was characterized as a product rich in dietary fibre, a good source of essential amino acids, linolenic acid and minerals, with good sensory acceptability. These findings reports for the first time the application of quinoa processed as flour and flakes in mixture with corn starch as an alternative ingredient for formulations of gluten-free cookies-type biscuits.

A Novel cooked extruded lentils analog: physical and chemical properties

Developing an extruded lentil analog is our aim. Lentil analog with six formulations were produced using a pilot-scale single (SS) and twin screw (TS) extruders. Texture analysis of lentil analogs prepared for consumption revealed that the products formulated with 60:40 and 70:30 soy: wheat ratios exhibited a significantly higher hardness, adhesiveness and lower springiness as compared to all other treatments. Differential Scanning Calorimeter (DSC) results indicated that all starches in dry blend are completely 100 % gelatinized by extrusion for all treatments at 100 °C. The maximum peak of viscosity for TS was formed after 5.58 min. from the run at 89.9 °C for the best treatment. However, this lentil analog product can provide a high quality lentil which can be used as a substitute for regular lentils.

Rheological properties of refined wheat - millet flour based dough under thermo-mechanical stress

Designed experiments were conducted to study the rheological properties of baking dough prepared from different refined wheat flour (RWF) - barnyard millet blends with varying amount of water (WA), salt and sugar. Dough was subjected to thermo-mechanical stress in Mixolab, in which rheological properties were recorded in terms of five different torques. Second order polynomial models were developed using response surface methodology (RSM) to understand the effect of input variables (WA, barnyard millet, salt and sugar; all expressed as per cent of base flour) on torques recorded by Mixolab. Optimum values of input variables were obtained with constraints based on torque values which represented the qualities of acceptable bread dough. The models predicted that a dough with 57, 26, 1.8 and 3.3% of water, barnyard millet, salt and sugar, respectively, can be used for bread baking purposes.

Process optimization for a nutritious low-calorie high-fiber whey-based ready-to-serve watermelon beverage

Whey is a nutritious by product of some traditional Indian processed milk products and it needs to be utilized in an effective way in order to reduce environmental hazards associated with its untreated disposal. Low calorie watermelon beverage appears to be a simple, attractive and economic method of whey disposal. The experiment was designed by Central Composite Rotatable Design of Responce Surface Methodology. Three independent variables whey, Innova ® fiber and sucralose were chosen at five levels within the respective ranges of 40-60 %, 2.0-5.0 % and 0.01-0.03 %. The effect of the variables on flavour, mouthfeel, after-taste, viscosity, total soluble solids (all to be maximized) and sedimentation (to be minimized) was observed. These three were the independent variables whose effect on flavour, mouthfeel, after-taste, viscosity, total soluble solids (all to be maximized) and sedimentation (to be minimized) were evaluated. Quadratic model fitted well to all dependent variables. The R(2) values for flavour, mouthfeel, aftertaste, viscosity, sedimentation and TSS were 95.57, 98.71, 95.50, 97.87, 99.26 and 98.17 %, respectively. Response surface methodology was used to optimize the level of processing parameters. Maximum scores for flavour (7.46), mouthfeel (7.49), after-taste (7.72), viscosity (13.55 cp) and total soluble solid (15.34°Brix) and minimum score for sedimentation (1.55 ml/10 ml) were obtained when the formulation contained 51.46 % whey, 3.84 % Innova® fiber and 0.021 % sucralose.