Initiation and growth of microtubules from mitotic centers in lysed mammalian cells

CFDP1 regulates the stability of pericentric heterochromatin thereby affecting RAN GTPase activity and mitotic spindle formation

The densely packed centromeric heterochromatin at minor and major satellites is comprised of H3K9me2/3 histones, the heterochromatin protein HP1α, and histone variants. In the present study, we sought to determine the mechanisms by which condensed heterochromatin at major and minor satellites stabilized by the chromatin factor CFDP1 affects the activity of the small GTPase Ran as a requirement for spindle formation. CFDP1 colocalized with heterochromatin at major and minor satellites and was essential for the structural stability of centromeric heterochromatin. Loss of CENPA, HP1α, and H2A.Z heterochromatin components resulted in decreased binding of the spindle nucleation facilitator RCC1 to minor and major satellite repeats. Decreased RanGTP levels as a result of diminished RCC1 binding interfered with chromatin-mediated microtubule nucleation at the onset of mitotic spindle formation. Rescuing chromatin H2A.Z levels in cells and mice lacking CFDP1 through knock-down of the histone chaperone ANP32E not only partially restored RCC1-dependent RanGTP levels but also alleviated CFDP1-knockout-related craniofacial defects and increased microtubule nucleation in CFDP1/ANP32E co-silenced cells. Together, these studies provide evidence for a direct link between condensed heterochromatin at major and minor satellites and microtubule nucleation through the chromatin protein CFDP1.

Lack of chromokinesin Klp-19 creates a more rigid midzone and affects force transmission during anaphase in C. elegans

Recent studies have highlighted the significance of the spindle midzone - the region positioned between chromosomes - in ensuring proper chromosome segregation. By combining advanced 3D electron tomography and cutting-edge light microscopy we have discovered a previously unknown role of the regulation of microtubule dynamics within the spindle midzone of C. elegans. Using Fluorescence recovery after photobleaching and a combination of second harmonic generation and two-photon fluorescence microscopy, we found that the length of the antiparallel microtubule overlap zone in the spindle midzone is constant throughout anaphase, and independent of cortical pulling forces as well as the presence of the microtubule bundling protein SPD-1. Further investigations of SPD-1 and the chromokinesin KLP-19 in C. elegans suggest that KLP-19 regulates the overlap length and functions independently of SPD-1. Our data shows that KLP-19 plays an active role in regulating the length and turn-over of microtubules within the midzone as well as the size of the antiparallel overlap region throughout mitosis. Depletion of KLP-19 in mitosis leads to an increase in microtubule length in the spindle midzone, which also leads to increased microtubule - microtubule interaction, thus building up a more robust microtubule network. The spindle is globally stiffer and more stable, which has implications for the transmission of forces within the spindle affecting chromosome segregation dynamics. Our data shows that by localizing KLP-19 to the spindle midzone in anaphase microtubule dynamics can be locally controlled allowing the formation of a functional midzone.

Cell biology: Kinetochores nucleate their own microtubules

The origin of microtubules that tether the chromosomes' kinetochores to spindle poles has remained a mystery for several decades. A new study identifies the 'fibrous corona' as an autonomous microtubule nucleation site, and reveals the molecular cascade responsible for this process.

Non-centrosomal microtubules at kinetochores promote rapid chromosome biorientation during mitosis in human cells

Proper segregation of chromosomes during mitosis depends on "amphitelic attachments"-load-bearing connections of sister kinetochores to the opposite spindle poles via bundles of microtubules, termed as the "K-fibers." Current models of spindle assembly assume that K-fibers arise largely from stochastic capture of microtubules, which occurs at random times and locations and independently at sister kinetochores. We test this assumption by following the movements of all kinetochores in human cells and determine that most amphitelic attachments form synchronously at a specific stage of spindle assembly and within a spatially distinct domain. This biorientation domain is enriched in bundles of antiparallel microtubules, and perturbation of microtubule bundling changes the temporal and spatial dynamics of amphitelic attachment formation. Structural analyses indicate that interactions of kinetochores with microtubule bundles are mediated by non-centrosomal short microtubules that emanate from most kinetochores during early prometaphase. Computational analyses suggest that momentous molecular motor-driven interactions with antiparallel bundles rapidly convert these short microtubules into nascent K-fibers. Thus, load-bearing connections to the opposite spindle poles form simultaneously on sister kinetochores. In contrast to the uncoordinated sequential attachments of sister kinetochores expected in stochastic models of spindle assembly, our model envisions the formation of amphitelic attachments as a deterministic process in which the chromosomes connect with the spindle poles synchronously at a specific stage of spindle assembly and at a defined location determined by the spindle architecture. Experimental analyses of changes in the kinetochore behavior in cells with perturbed activity of molecular motors CenpE and dynein confirm the predictive power of the model.

Mitotic poleward flux: Finding balance between microtubule dynamics and sliding

Continuous poleward motion of microtubules in metazoan mitotic spindles has been fascinating generations of cell biologists over the last several decades. In human cells, this so-called poleward flux was recently shown to be driven by the coordinated action of four mitotic kinesins. The sliding activities of kinesin-5/EG5 and kinesin-12/KIF15 are sequentially supported by kinesin-7/CENP-E at kinetochores and kinesin-4/KIF4A on chromosome arms, with the individual contributions peaking during prometaphase and metaphase, respectively. Although recent data elucidate the molecular mechanism underlying this cellular phenomenon, the functional roles of microtubule poleward flux during cell division remain largely elusive. Here, we discuss potential contribution of microtubule flux engine to various essential processes at different stages of mitosis.

The metaphase spindle at steady state - Mechanism and functions of microtubule poleward flux

The mitotic spindle is a bipolar cellular structure, built from tubulin polymers, called microtubules, and interacting proteins. This macromolecular machine orchestrates chromosome segregation, thereby ensuring accurate distribution of genetic material into the two daughter cells during cell division. Powered by GTP hydrolysis upon tubulin polymerization, the microtubule ends exhibit a metastable behavior known as the dynamic instability, during which they stochastically switch between the growth and shrinkage phases. In the context of the mitotic spindle, dynamic instability is furthermore regulated by microtubule-associated proteins and motor proteins, which enables the spindle to undergo profound changes during mitosis. This highly dynamic behavior is essential for chromosome capture and congression in prometaphase, as well as for chromosome alignment to the spindle equator in metaphase and their segregation in anaphase. In this review we focus on the mechanisms underlying microtubule dynamics and sliding and their importance for the maintenance of shape, structure and dynamics of the metaphase spindle. We discuss how these spindle properties are related to the phenomenon of microtubule poleward flux, highlighting its highly cooperative molecular basis and role in keeping the metaphase spindle at a steady state.

Role of spatial patterns and kinetochore architecture in spindle morphogenesis

Mitotic spindle is a self-assembling macromolecular machine responsible for the faithful segregation of chromosomes during cell division. Assembly of the spindle is believed to be governed by the 'Search & Capture' (S&C) principle in which dynamic microtubules explore space in search of kinetochores while the latter capture microtubules and thus connect chromosomes to the spindle. Due to the stochastic nature of the encounters between kinetochores and microtubules, the time required for incorporating all chromosomes into the spindle is profoundly affected by geometric constraints, such as the size and shape of kinetochores as well as their distribution in space at the onset of spindle assembly. In recent years, several molecular mechanisms that control these parameters have been discovered. It is now clear that stochastic S&C takes place in structured space, where components are optimally distributed and oriented to minimize steric hindrances. Nucleation of numerous non-centrosomal microtubules near kinetochores accelerates capture, while changes in the kinetochore architecture at various stages of spindle assembly promote proper connection of sister kinetochores to the opposite spindle poles. Here we discuss how the concerted action of multiple facilitating mechanisms ensure that the spindle assembles rapidly yet with a minimal number of errors.

With Age Comes Maturity: Biochemical and Structural Transformation of a Human Centriole in the Making

Centrioles are microtubule-based cellular structures present in most human cells that build centrosomes and cilia. Proliferating cells have only two centrosomes and this number is stringently maintained through the temporally and spatially controlled processes of centriole assembly and segregation. The assembly of new centrioles begins in early S phase and ends in the third G1 phase from their initiation. This lengthy process of centriole assembly from their initiation to their maturation is characterized by numerous structural and still poorly understood biochemical changes, which occur in synchrony with the progression of cells through three consecutive cell cycles. As a result, proliferating cells contain three structurally, biochemically, and functionally distinct types of centrioles: procentrioles, daughter centrioles, and mother centrioles. This age difference is critical for proper centrosome and cilia function. Here we discuss the centriole assembly process as it occurs in somatic cycling human cells with a focus on the structural, biochemical, and functional characteristics of centrioles of different ages.

Metaphase Spindle Assembly

A microtubule-based bipolar spindle is required for error-free chromosome segregation during cell division. In this review I discuss the molecular mechanisms required for the assembly of this dynamic micrometer-scale structure in animal cells.

Mechanisms of Mitotic Spindle Assembly

Life depends on cell proliferation and the accurate segregation of chromosomes, which are mediated by the microtubule (MT)-based mitotic spindle and ∼200 essential MT-associated proteins. Yet, a mechanistic understanding of how the mitotic spindle is assembled and achieves chromosome segregation is still missing. This is mostly due to the density of MTs in the spindle, which presumably precludes their direct observation. Recent insight has been gained into the molecular building plan of the metaphase spindle using bulk and single-molecule measurements combined with computational modeling. MT nucleation was uncovered as a key principle of spindle assembly, and mechanistic details about MT nucleation pathways and their coordination are starting to be revealed. Lastly, advances in studying spindle assembly can be applied to address the molecular mechanisms of how the spindle segregates chromosomes.

Efficiency of organelle capture by microtubules as a function of centrosome nucleation capacity: general theory and the special case of polyspermia

Transport of organelles along microtubules is essential for the cell metabolism and morphogenesis. The presented analysis derives the probability that an organelle of a given size comes in contact with the microtubule aster. The question is asked how this measure of functionality of the microtubule aster is controlled by the centrosome. A quantitative model is developed to address this question. It is shown that for the given set of cellular parameters, such as size and total tubulin content, a centrosome nucleation capacity exists that maximizes the probability of the organelle capture. The developed general model is then applied to the capture of the female pronucleus by microtubules assembled on the sperm centrosome, following physiologically polyspermic fertilization. This application highlights an unintuitive reflection of nonlinearity of the nucleated polymerization of the cellular pool of tubulin. The prediction that the sperm centrosome should lower its nucleation capacity in the face of the competition from the other sperm is a stark illustration of the new optimality principle. Overall, the model calls attention to the capabilities of the centrosomal pathway of regulation of the transport-related functionality of the microtubule cytoskeleton. It establishes a quantitative and conceptual framework that can guide experiment design and interpretation.

Biophysics of mitosis

Mitosis is the process by which eukaryotic cells organize and segregate their chromosomes in preparation for cell division. It is accomplished by a cellular machine composed largely of microtubules (MTs) and their associated proteins. This article reviews literature on mitosis from a biophysical point of view, drawing attention to the assembly and motility processes required to do this complex job with precision. Work from both the recent and the older literature is integrated into a description of relevant biological events and the experiments that probe their mechanisms. Theoretical work on specific subprocesses is also reviewed. Our goal is to provide a document that will expose biophysicists to the fascination of this quite amazing process and provide them with a good background from which they can pursue their own research interests in the subject.

50 ways to build a spindle: the complexity of microtubule generation during mitosis

The accurate segregation of duplicated chromosomes, essential for the development and viability of a eukaryotic organism, requires the formation of a robust microtubule (MT)-based spindle apparatus. Entry into mitosis or meiosis precipitates a cascade of signalling events which result in the activation of pathways responsible for a dramatic reorganisation of the MT cytoskeleton: through changes in the properties of MT-associated proteins, local concentrations of free tubulin dimer and through enhanced MT nucleation. The latter is generally thought to be driven by localisation and activation of γ-tubulin-containing complexes (γ-TuSC and γ-TuRC) at specific subcellular locations. For example, upon entering mitosis, animal cells concentrate γ-tubulin at centrosomes to tenfold the normal level during interphase, resulting in an aster-driven search and capture of chromosomes and bipolar mitotic spindle formation. Thus, in these cells, centrosomes have traditionally been perceived as the primary microtubule organising centre during spindle formation. However, studies in meiotic cells, plants and cell-free extracts have revealed the existence of complementary mechanisms of spindle formation, mitotic chromatin, kinetochores and nucleation from existing MTs or the cytoplasm can all contribute to a bipolar spindle apparatus. Here, we outline the individual known mechanisms responsible for spindle formation and formulate ideas regarding the relationship between them in assembling a functional spindle apparatus.

The conversion of centrioles to centrosomes: essential coupling of duplication with segregation

Centrioles are self-reproducing organelles that form the core structure of centrosomes or microtubule-organizing centers (MTOCs). However, whether duplication and MTOC organization reflect innate activities of centrioles or activities acquired conditionally is unclear. In this paper, we show that newly formed full-length centrioles had no inherent capacity to duplicate or to organize pericentriolar material (PCM) but acquired both after mitosis through a Plk1-dependent modification that occurred in early mitosis. Modified centrioles initiated PCM recruitment in G1 and segregated equally in mitosis through association with spindle poles. Conversely, unmodified centrioles segregated randomly unless passively tethered to modified centrioles. Strikingly, duplication occurred only in centrioles that were both modified and disengaged, whereas unmodified centrioles, engaged or not, were "infertile," indicating that engagement specifically blocks modified centrioles from reduplication. These two requirements, centriole modification and disengagement, fully exclude unlimited duplication in one cell cycle. We thus uncovered a Plk1-dependent mechanism whereby duplication and segregation are coupled to maintain centriole homeostasis.

Making the Auroras glow: regulation of Aurora A and B kinase function by interacting proteins

The conserved Aurora family of protein kinases have emerged as crucial regulators of mitosis and cytokinesis. Despite their high degree of homology, Aurora A and B have very distinctive localisations and functions: Aurora A associates with the spindle poles to regulate entry into mitosis, centrosome maturation and spindle assembly; Aurora B is a member of the Chromosomal Passenger Complex (CPC) that transfers from the inner centromere in early mitosis to the spindle midzone, equatorial cortex and midbody in late mitosis and cytokinesis. Aurora B functions include regulation of chromosome–microtubule interactions, cohesion, spindle stability and cytokinesis. This review will focus on how interacting proteins make this functional diversity possible by targeting the kinases to different subcellular locations and regulating their activity.

The life and miracles of kinetochores

Kinetochores are large protein assemblies built on chromosomal loci named centromeres. The main functions of kinetochores can be grouped under four modules. The first module, in the inner kinetochore, contributes a sturdy interface with centromeric chromatin. The second module, the outer kinetochore, contributes a microtubule-binding interface. The third module, the spindle assembly checkpoint, is a feedback control mechanism that monitors the state of kinetochore-microtubule attachment to control the progression of the cell cycle. The fourth module discerns correct from improper attachments, preventing the stabilization of the latter and allowing the selective stabilization of the former. In this review, we discuss how the molecular organization of the four modules allows a dynamic integration of kinetochore-microtubule attachment with the prevention of chromosome segregation errors and cell-cycle progression.

Centrosome function: sometimes less is more

Tight regulation of centrosome duplication is critical to ensure that centrosome number doubles once and only once per cell cycle. Superimposed onto this centrosome duplication cycle is a functional centrosome cycle in which they alternate between phases of quiescence and robust microtubule (MT) nucleation and MT-anchoring activities. In vertebrate cycling cells, interphase centrioles accumulate less pericentriolar material (PCM), reducing their MT nucleation capacity. In mitosis, centrosomes mature, accumulating more PCM to increase their nucleation and anchoring capacities to form robust MT asters. Interestingly, functional cycles of centrosomes can be altered to suit the cell's needs. Some interphase centrosomes function as a microtubule-organizing center by increasing their ability to anchor MTs to form centrosomal radial arrays. Other interphase centrosomes maintain their MT nucleation capacity but reduce/eliminate their MT-anchoring capacity. Recent work demonstrates that Drosophila cells take this to the extreme, whereby centrioles lose all detectable PCM during interphase, offering an explanation as to how centrosome-deficient flies develop to adulthood. Drosophila stem cells further modify the functional cycle by differentially regulating their two centrioles - a situation that seems important for stem cell asymmetric divisions, as misregulation of centrosome duplication in stem/progenitor cells can promote tumor formation. Here, we review recent findings that describe variations in the functional cycle of centrosomes.

Aurora-A kinase regulates breast cancer associated gene 1 inhibition of centrosome-dependent microtubule nucleation

Breast cancer-associated gene 1 (BRCA1) regulates the duplication and the function of centrosomes in breast cells. We have previously shown that BRCA1 ubiquitin ligase activity directly inhibits centrosome-dependent microtubule nucleation. However, there is a paradox because centrosome microtubule nucleation potential is highest during mitosis, a phase when BRCA1 is most abundant at the centrosome. In this study, we resolve this conundrum by testing whether centrosomes from cells in M phase are regulated differently by BRCA1 when compared with other phases of the cell cycle. We observed that BRCA1-dependent inhibition of centrosome microtubule nucleation was high in S phase but was significantly lower during M phase. The cell cycle-specific effects of BRCA1 on centrosome-dependent microtubule nucleation were detected in living cells and in cell-free experiments using centrosomes purified from cells at specific stages of the cell cycle. We show that Aurora-A kinase modulates the BRCA1 inhibition of centrosome function by decreasing the E3 ubiquitin ligase activity of BRCA1. In addition, dephosphorylation of BRCA1 by protein phosphatase 1 alpha enhances the E3 ubiquitin ligase activity of BRCA1. These observations reveal that the inhibition of centrosome microtubule nucleation potential by the BRCA1 E3 ubiquitin ligase is controlled by Aurora-A kinase and protein phosphatase 1 alpha-mediated phosphoregulation through the different phases of the cell cycle.

Cooperative mechanisms of mitotic spindle formation

Cooperativity is well known to promote the speed of some biochemical reactions by accelerating the activity of enzymes. Recent studies have shown that cooperative interactions also function during the formation of a complex cellular structure, the mitotic spindle. Capture of kinetochores by dynamic astral microtubules was originally proposed as the basis of spindle formation. However, mounting evidence indicates that a more complex series of events occurs. It is now clear that there are multiple microtubule nucleation and capture sites throughout the spindle. Kinetochores, centrosomes and microtubules play multiple roles in establishing connections between spindle components and integrating them into a common structure. These data support a modified search-and-capture model that incorporates additional assembly pathways coordinated by a RanGTP gradient.

Cell cycle progression and de novo centriole assembly after centrosomal removal in untransformed human cells

How centrosome removal or perturbations of centrosomal proteins leads to G1 arrest in untransformed mammalian cells has been a mystery. We use microsurgery and laser ablation to remove the centrosome from two types of normal human cells. First, we find that the cells assemble centrioles de novo after centrosome removal; thus, this phenomenon is not restricted to transformed cells. Second, normal cells can progress through G1 in its entirety without centrioles. Therefore, the centrosome is not a necessary, integral part of the mechanisms that drive the cell cycle through G1 into S phase. Third, we provide evidence that centrosome loss is, functionally, a stress that can act additively with other stresses to arrest cells in G1 in a p38-dependent fashion.

Two-way traffic: centrosomes and the cell cycle

The well recognized activities of the mammalian centrosome--microtubule nucleation, duplication, and organization of the primary cilium--are under the control of the cell cycle. However, the centrosome is more than just a follower of the cell cycle; it can also be essential for the cell to transit G1 and enter S phase. How the centrosome influences G1 progression is a mystery.

Kinetochore-microtubule interactions during cell division

Proper segregation of chromosomes during cell division is essential for the maintenance of genetic stability. During this process chromosomes must establish stable functional interactions with microtubules through the kinetochore, a specialized protein structure located on the surface of the centromeric heterochromatin. Stable attachment of kinetochores to a number of microtubules results in the formation of a kinetochore fibre that mediates chromosome movement. How the kinetochore fibre is formed and how chromosome motion is produced and regulated remain major questions in cell biology. Here we look at some of the history of research devoted to the study of kinetochore-microtubule interaction and attempt to identify significant advances in the knowledge of the basic processes. Ultrastructural work has provided substantial insights into the structure of the kinetochore and associated microtubules during different stages of mitosis. Also, recent in-vivo studies have probed deep into the dynamics of kinetochore-attached microtubules suggesting possible models for the way in which kinetochores harness the capacity of microtubules to do work and turn it into chromosome motion. Much of the research in recent years suggests that indeed multiple mechanisms are involved in both formation of the k-fibre and chromosome motion. Thus, rather than moving to a unified theory, it has become apparent that most cell types have the capacity to build the spindle using multiple and probably redundant mechanisms.

Kinetochore-driven formation of kinetochore fibers contributes to spindle assembly during animal mitosis

It is now clear that a centrosome-independent pathway for mitotic spindle assembly exists even in cells that normally possess centrosomes. The question remains, however, whether this pathway only activates when centrosome activity is compromised, or whether it contributes to spindle morphogenesis during a normal mitosis. Here, we show that many of the kinetochore fibers (K-fibers) in centrosomal Drosophila S2 cells are formed by the kinetochores. Initially, kinetochore-formed K-fibers are not oriented toward a spindle pole but, as they grow, their minus ends are captured by astral microtubules (MTs) and transported poleward through a dynein-dependent mechanism. This poleward transport results in chromosome bi-orientation and congression. Furthermore, when individual K-fibers are severed by laser microsurgery, they regrow from the kinetochore outward via MT plus-end polymerization at the kinetochore. Thus, even in the presence of centrosomes, the formation of some K-fibers is initiated by the kinetochores. However, centrosomes facilitate the proper orientation of K-fibers toward spindle poles by integrating them into a common spindle.

Molecular components of the centrosome

The centrosome organizes microtubules during both interphase and mitosis and therefore governs fundamental processes in the life of a eukaryotic cell. The past few years have seen a substantial increase in the identification of potential components localized at the centrosome. Although we are still far from achieving a coherent picture of the workings of the centrosome, these recent discoveries are promising first steps towards an understanding of centrosomal functions at the molecular level.

Centrosome maturation: measurement of microtubule nucleation throughout the cell cycle by using GFP-tagged EB1

Understanding how cells regulate microtubule nucleation during the cell cycle has been limited by the inability to directly observe nucleation from the centrosome. To view nucleation in living cells, we imaged GFP-tagged EB1, a microtubule tip-binding protein, and determined rates of nucleation by counting the number of EB1-GFP comets emerging from the centrosome over time. Nucleation rate increased 4-fold between G(2) and prophase and continued to rise through anaphase and telophase, reaching a maximum of 7 times interphase rates. We tested several models for centrosome maturation, including gamma-tubulin recruitment and increased centrosome size. The centrosomal concentration of gamma-tubulin reached a maximum at metaphase, and centrosome size increased through anaphase, whereas nucleation remained high through telophase, implying the presence of additional regulatory processes. Injection of anti-gamma-tubulin antibodies significantly blocked nucleation during metaphase but was less effective during anaphase, suggesting that a nucleation mechanism independent of gamma-tubulin contributes to centrosome function after metaphase.

MTOC formation during mitotic exit in fission yeast

Microtubules polymerise from nucleation templates containing γ tubulin. These templates are generally concentrated in discrete structures called microtubule organising centres (MTOCs). In Schizosaccharomyces pombe, an equatorial MTOC (EMTOC) forms mid-way through anaphase B and then disassembles during the final stages of cell separation. We show that the EMTOC was generated by recruiting γ tubulin to the equatorial F-actin ring before it constricted to cleave the cell in two during cytokinesis. The EMTOC was not a continuous ring. It had a variable structure ranging from a horseshoe to a number of short bars. EMTOC integrity depended upon the integrity of the F-actin but not the microtubule cytoskeleton. EMTOC assembly required the activity of both the septation-inducing network (SIN) that regulates the onset of cytokinesis and the anaphase-promoting complex. Activation of the SIN in interphase cells induced F-actin ring formation and contraction and the synthesis of the primary septum but did not promote EMTOC assembly. In contrast, overproduction of the polo-like kinase, Plo1, which also induced multiple rounds of septation in interphase cells, induced EMTOC formation. Thus, the network governing EMTOC formation shared many of the regulatory elements that control cytokinesis but was more complex and revealed an additional function for Plo1 during mitotic exit.

Identification of ribonucleotide reductase protein R1 as an activator of microtubule nucleation in Xenopus egg mitotic extracts

Microtubule nucleation on the centrosome and the fungal equivalent, the spindle pole body (SPB), is activated at the onset of mitosis. We previously reported that mitotic extracts prepared from Xenopus unfertilized eggs convert the interphase SPB of fission yeast into a competent state for microtubule nucleation. In this study, we have purified an 85-kDa SPB activator from the extracts and identified it as the ribonucleotide reductase large subunit R1. We further confirmed that recombinant mouse R1 protein was also effective for SPB activation. On the other hand, another essential subunit of ribonucleotide reductase, R2 protein, was not required for SPB activation. SPB activation by R1 protein was suppressed in the presence of anti-R1 antibodies or a partial oligopeptide of R1; the oligopeptide also inhibited aster formation on Xenopus sperm centrosomes. In accordance, R1 was detected in animal centrosomes by immunofluorescence and immunoblotting with anti-R1 antibodies. In addition, recombinant mouse R1 protein bound to gamma- and alpha/beta-tubulin in vitro. These results suggest that R1 is a bifunctional protein that acts on both ribonucleotide reduction and centrosome/SPB activation.

Microtubule nucleating capacity of centrosomes in tissue sections

We used a novel adaptation of methods for microtubule polymerization in vitro to assess the MTOC activity of centrosomes in frozen-sectioned tissues. Remarkably, centrosomes of tissue sections retain the ability to nucleate microtubules even after several years of storage as frozen tissue blocks. Adaptations of these methods allow accurate counts of microtubules from individual cells and the quantitative estimation the MTOC activity of the intact tissue. These methods can be utilized to characterize MTOC activity in normal and diseased tissues and in particular tissues at different stages of development. (J Histochem Cytochem 47:1265-1273, 1999)

The sudden recruitment of gamma-tubulin to the centrosome at the onset of mitosis and its dynamic exchange throughout the cell cycle, do not require microtubules

gamma-Tubulin is a centrosomal component involved in microtubule nucleation. To determine how this molecule behaves during the cell cycle, we have established several vertebrate somatic cell lines that constitutively express a gamma-tubulin/green fluorescent protein fusion protein. Near simultaneous fluorescence and DIC light microscopy reveals that the amount of gamma-tubulin associated with the centrosome remains relatively constant throughout interphase, suddenly increases during prophase, and then decreases to interphase levels as the cell exits mitosis. This mitosis-specific recruitment of gamma-tubulin does not require microtubules. Fluorescence recovery after photobleaching (FRAP) studies reveal that the centrosome possesses two populations of gamma-tubulin: one that turns over rapidly and another that is more tightly bound. The dynamic exchange of centrosome-associated gamma-tubulin occurs throughout the cell cycle, including mitosis, and it does not require microtubules. These data are the first to characterize the dynamics of centrosome-associated gamma-tubulin in vertebrate cells in vivo and to demonstrate the microtubule-independent nature of these dynamics. They reveal that the additional gamma-tubulin required for spindle formation does not accumulate progressively at the centrosome during interphase. Rather, at the onset of mitosis, the centrosome suddenly gains the ability to bind greater than three times the amount of gamma-tubulin than during interphase.

Molecular characteristics of the centrosome

As an organizer of the microtubule cytoskeleton in animals, the centrosome has an important function. From the early light microscopic observation of the centrosome to examination by electron microscopy, the centrosome field is now in an era of molecular identification and precise functional analyses. Tables compiling centrosomal proteins and reviews on the centrosome are presented here and demonstrate how active the field is. However, despite this intense research activity, many classical questions are still unanswered. These include those regarding the precise function of centrioles, the mechanism of centrosome duplication and assembly, the origin of the centrosome, and the regulation and mechanism of the centrosomal microtubule nucleation activity. Fortunately, these questions are becoming elucidated based on experimental data discussed here. Given the fact that the centrosome is primarily a site of microtubule nucleation, special focus is placed on the process of microtubule nucleation and on the regulation of centrosomal microtubule nucleation capacity during the cell cycle and in some tissues.

C-Nap1, a novel centrosomal coiled-coil protein and candidate substrate of the cell cycle-regulated protein kinase Nek2

Nek2 (for NIMA-related kinase 2) is a mammalian cell cycle-regulated kinase structurally related to the mitotic regulator NIMA of Aspergillus nidulans. In human cells, Nek2 associates with centrosomes, and overexpression of active Nek2 has drastic consequences for centrosome structure. Here, we describe the molecular characterization of a novel human centrosomal protein, C-Nap1 (for centrosomal Nek2-associated protein 1), first identified as a Nek2-interacting protein in a yeast two-hybrid screen. Antibodies raised against recombinant C-Nap1 produced strong labeling of centrosomes by immunofluorescence, and immunoelectron microscopy revealed that C-Nap1 is associated specifically with the proximal ends of both mother and daughter centrioles. On Western blots, anti-C-Nap1 antibodies recognized a large protein (>250 kD) that was highly enriched in centrosome preparations. Sequencing of overlapping cDNAs showed that C-Nap1 has a calculated molecular mass of 281 kD and comprises extended domains of predicted coiled-coil structure. Whereas C-Nap1 was concentrated at centrosomes in all interphase cells, immunoreactivity at mitotic spindle poles was strongly diminished. Finally, the COOH-terminal domain of C-Nap1 could readily be phosphorylated by Nek2 in vitro, as well as after coexpression of the two proteins in vivo. Based on these findings, we propose a model implicating both Nek2 and C-Nap1 in the regulation of centriole-centriole cohesion during the cell cycle.

Dictyostelium gamma-tubulin: molecular characterization and ultrastructural localization

The centrosome of Dictyostelium discoideum is a nucleus-associated body consisting of an electron-dense, three-layered core surrounded by an amorphous matrix, the corona. To elucidate the molecular and supramolecular architecture of this unique microtubule-organizing center, we have isolated and sequenced the gene encoding gamma-tubulin and have studied its localization in the Dictyostelium centrosome using immunofluorescence and postembedding immunoelectron microscopy. D. discoideum possesses a single copy of a gamma-tubulin gene that is related to, but more divergent from, other gamma-tubulins. The low-abundance gene product is localized to the centrosome in an intriguing pattern: it is highly concentrated in the corona in regularly spaced clusters whose distribution correlates with the patterning of dense nodules that are a prominent feature of the corona. These observations lend support to the notion that the corona is the functional homologue of the pericentriolar matrix of ‘higher’ eukaryotic centrosomes, and that nodules are the functional equivalent of gamma-tubulin ring complexes that serve as nucleation sites for microtubules in animal centrosomes.

The spindle pole body of Schizosaccharomyces pombe enters and leaves the nuclear envelope as the cell cycle proceeds

The cycle of spindle pole body (SPB) duplication, differentiation, and segregation in Schizosaccharomyces pombe is different from that in some other yeasts. Like the centrosome of vertebrate cells, the SPB of S. pombe spends most of interphase in the cytoplasm, immediately next to the nuclear envelope. Some gamma-tubulin is localized on the SPB, suggesting that it plays a role in the organization of interphase microtubules (MTs), and serial sections demonstrate that some interphase MTs end on or very near to the SPB. gamma-Tubulin is also found on osmiophilic material that lies near the inner surface of the nuclear envelope, immediately adjacent to the SPB, even though there are no MTs in the interphase nucleus. Apparently, the MT initiation activities of gamma-tubulin in S. pombe are regulated. The SPB duplicates in the cytoplasm during late G2 phase, and the two resulting structures are connected by a darkly staining bridge until the mitotic spindle forms. As the cell enters mitosis, the nuclear envelope invaginates beside the SPB, forming a pocket of cytoplasm that accumulates dark amorphous material. The nuclear envelope then opens to form a fenestra, and the duplicated SPB settles into it. Each part of the SPB initiates intranuclear MTs, and then the two structures separate to lie in distinct fenestrae as a bipolar spindle forms. Through metaphase, the SPBs remain in their fenestrae, bound to the polar ends of spindle MTs; at about this time, a small bundle of cytoplasmic MTs forms in association with each SPB. These MTs are situated with one end near to, but not on, the SPBs, and they project into the cytoplasm at an orientation that is oblique to the simple axis. As anaphase proceeds, the nuclear fenestrae close, and the SPBs are extruded back into the cytoplasm. These observations define new fields of enquiry about the control of SPB duplication and the dynamics of the nuclear envelope.

Cell model systems in plant cytoskeleton studies

Cytoskeletons play an essential role in cellular functions in both animal and plant cells. In studies of the molecular mechanisms of their functions, a variety of cell model systems, mainly of animal cells, have yielded much information. With plant cells, cell model systems have mostly been restricted to studies on the mechanism of cytoplasmic streaming. Recently, however, there have been several reports of studies employing plant cell model systems to investigate plant cytoskeletons that have revealed new concepts about their structure and functions. To promote and support a general understanding of cell model systems, this review attempts to categorize them, present currently known information on the structure and function of plant cytoskeletons, and offer a possible role of cell model systems in future studies of plant cytoskeletons.

Antibody microinjection reveals an essential role for human polo-like kinase 1 (Plk1) in the functional maturation of mitotic centrosomes

Mammalian polo-like kinase 1 (Plk1) is structurally related to the polo gene product of Drosophila melanogaster, Cdc5p of Saccharomyces cerevisiae, and plo1+ of Schizosaccharomyces pombe, a newly emerging family of serine-threonine kinases implicated in cell cycle regulation. Based on data obtained for its putative homologues in invertebrates and yeasts, human Plk1 is suspected to regulate some fundamental aspect(s) of mitosis, but no direct experimental evidence in support of this hypothesis has previously been reported. In this study, we have used a cell duplication, microinjection assay to investigate the in vivo function of Plk1 in both immortalized (HeLa) and nonimmortalized (Hs68) human cells. Injection of anti-Plk1 antibodies (Plk1+) at various stages of the cell cycle had no effect on the kinetics of DNA replication but severely impaired the ability of cells to divide. Analysis of Plk1(+)-injected, mitotically arrested HeLa cells by fluorescence microscopy revealed abnormal distributions of condensed chromatin and monoastral microtubule arrays that were nucleated from duplicated but unseparated centrosomes. Most strikingly, centrosomes in Plk1(+)-injected cells were drastically reduced in size, and the accumulation of both gamma-tubulin and MPM-2 immunoreactivity was impaired. These data indicate that Plk1 activity is necessary for the functional maturation of centrosomes in late G2/early prophase and, consequently, for the establishment of a bipolar spindle. Additional roles for Plk1 at later stages of mitosis are not excluded, although injection of Plk1+ after the completion of spindle formation did not interfere with cytokinesis. Injection of Plk1+ into nonimmortalized Hs68 cells produced qualitatively similar phenotypes, but the vast majority of the injected Hs68 cells arrested as single, mononucleated cells in G2. This latter observation hints at the existence, in nonimmortalized cells, of a centrosome-maturation checkpoint sensitive to the impairment of Plk1 function.

Role of gamma-tubulin in mitosis-specific microtubule nucleation from the Schizosaccharomyces pombe spindle pole body

The ability of the Schizosacchromyces pombe spindle pole body to nucleate microtubules is activated at the onset of mitosis for forming a mitotic spindle, but it is inactivated during interphase. We have previously developed an in vitro assay for studying the molecular mechanism of spindle pole body activation using permeabilized interphase S. pombe cells and Xenopus mitotic extracts. We have shown that the interphase spindle pole body is activated indirectly by p34cdc2 protein kinase in Xenopus mitotic extracts. In this study we examined the role of gamma-tubulin, a component of both interphase and mitotic spindle pole body, in formation of the microtubule nucleating complex at the mitotic spindle pole body. A polyclonal antibody specific to S. pombe gamma-tubulin inhibited both activation of the interphase spindle pole body and microtubule nucleation from the mitotic spindle pole body. Addition of bacterially expressed S. pombe gamma-tubulin or its amino-terminal fragments to Xenopus mitotic extracts inhibited spindle pole body activation. Affinity chromatography of partially fractionated Xenopus mitotic extracts with the amino-terminal fragment of S. pombe gamma-tubulin showed that fractions bound to the fragment supported the activation. The fractions did not contain Xenopus gamma-tubulin, showing that activation of the spindle pole body is not due to recruitment of Xenopus gamma-tubulin to the spindle pole body. The spindle pole body activation occurred in extracts depleted of p34cdc2 protein kinase or MAP kinase. The activity of the fractions bound to the fragment was inhibited by a protein kinase inhibitor, staurosporine. These results suggest that S. pombe gamma-tubulin is a component of the microtubule nucleating complex, and that the function of proteins that interact with gamma-tubulin is required for activation of the spindle pole body. We present possible models for the activation that convert the immature microtubule nucleating complex at interphase into the mature microtubule nucleating complex at mitosis.

γ-Tubulin and the fungal microtubule cytoskeleton

γ-Tubulin is present in phylogenetically diverse eukaryotes. It is a component of microtubule organizing centers such as the spindle pole bodies of fungi. In Aspergillus nidulans and Schizosaccharomyces pombe, it is essential for nuclear division, and, thus, for viability. In A. nidulans, nuclei carrying a γ-tubulin disruption can be maintained in heterokaryons, and the phenotypes caused by the disruption can be determined in uninucleate spores produced by the heterokaryons. Experiments with heterokaryons created in strains with mutations that allow synchronization of the cell cycle reveal that γ-tubulin is not required for the transition from the G1phase of the cell cycle through S phase to G2, nor for the entry into mitosis as judged by chromosomal condensation. It is, however, required for the formation of the mitotic spindle and for the successful completion of mitosis. Staining with the MPM-2 monoclonal antibody reveals that spindle pole body replication occurs in the absence of functional γ-tubulin. Finally, human γ-tubulin functions in fission yeast, and this indicates that γ-tubulin has similar functions in widely divergent organisms. Key words: tubulin, microtubule, spindle pole body, microtubule organizing center.

The 190 kDa centrosome-associated protein of Drosophila melanogaster contains four zinc finger motifs and binds to specific sites on polytene chromosomes

Microinjection of a bacterially expressed, TRITC labelled fragment of the centrosome-associated protein CP190 of Drosophila melanogaster, into syncytial Drosophila embryos, shows it to associate with the centrosomes during mitosis, and to relocate to chromatin during interphase. Indirect immunofluorescence staining of salivary gland chromosomes of third instar Drosophila larvae, with antibodies specific to CP190, indicate that the protein is associated with a large number of loci on these interphase polytene chromosomes. The 190 kDa CP190 protein is encoded by a 4.1 kb transcript with a single, long open reading frame specifying a polypeptide of 1,096 amino acids, with a molecular mass of 120 kDa, and an isoelectric point of 4.5. The central region of the predicted amino acid sequence of the CP190 protein contains four CysX2CysX12HisX4His zinc-finger motifs which are similar to those described for several well characterised DNA binding proteins. The data suggest that the function of CP190 involves cell cycle dependent associations with both the centrosome, and with specific chromosomal loci.

gamma-tubulin is a minus end-specific microtubule binding protein

The role of microtubules in mediating chromosome segregation during mitosis is well-recognized. In addition, interphase cells depend upon a radial and uniform orientation of microtubules, which are intrinsically asymmetric polymers, for the directional transport of many cytoplasmic components and for the maintenance of the structural integrity of certain organelles. The slow growing minus ends of microtubules are linked to the centrosome ensuring extension of the fast growing plus ends toward the cell periphery. However, the molecular mechanism of this linkage is not clear. One hypothesis is that gamma-tubulin, located at the centrosome, binds to the minus ends of microtubules. To test this model, we synthesized radiolabeled gamma-tubulin in vitro. We demonstrate here biochemically a specific, saturable, and tight (Kd = 10(-10) M) interaction of gamma-tubulin and microtubule ends with a stoichiometry of 12.6 +/- 4.9 molecules of gamma-tubulin per microtubule. In addition, we designed an in vitro assay to visualize gamma-tubulin at the minus ends of axonemal microtubules. These data show that gamma-tubulin represents the first protein to bind microtubule minus ends and might be responsible for mediating the link between microtubules and the centrosome.

Gamma-tubulin can both nucleate microtubule assembly and self-assemble into novel tubular structures in mammalian cells

alpha-, beta-, and gamma-tubulins are evolutionarily highly conserved members of the tubulin gene superfamily. While the abundant members, alpha- and beta-tubulins, constitute the building blocks of cellular microtubule polymers, gamma-tubulin is a low abundance protein which localized to the pericentriolar material and may play a role in microtubule assembly. To test whether gamma-tubulin mediates the nucleation of microtubule assembly in vivo, and co-assembles with alpha- and beta-tubulins into microtubules or self-assembles into macro-molecular structures, we experimentally elevated the expression of gamma-tubulin in the cell cytoplasm. In most cells, overexpression of gamma-tubulin causes a dramatic reorganization of the cellular microtubule network. Furthermore, we show that when overexpressed, gamma-tubulin causes ectopic nucleation of microtubules which are not associated with the centrosome. In a fraction of cells, gamma-tubulin self-assembles into novel tubular structures with a diameter of approximately 50 nm (named gamma-tubules). Furthermore, unlike microtubules, gamma-tubules are resistant to cold or drug induced depolymerization. These data provide evidence that gamma-tubulin can cause nucleation of microtubule assembly and can self-assemble into novel tubular structures.

Human gamma-tubulin functions in fission yeast

gamma-Tubulin is a phylogenetically conserved component of microtubule-organizing centers that is essential for viability and microtubule function. To examine the functional conservation of gamma-tubulin, we have tested the ability of human gamma-tubulin to function in the fission yeast Schizosaccharomyces pombe. We have found that expression of a human gamma-tubulin cDNA restores viability and a near-normal growth rate to cells of S. pombe lacking endogenous gamma-tubulin. Immunofluorescence microscopy showed that these cells contained normal mitotic spindles and interphase microtubule arrays, and that human gamma-tubulin, like S. pombe gamma-tubulin, localized to spindle pole bodies, the fungal microtubule-organizing centers. These results demonstrate that human gamma-tubulin functions in fission yeast, and they suggest that in spite of the great morphological differences between the microtubule-organizing centers of humans and fission yeasts, gamma-tubulin is likely to perform the same tasks in both. They suggest, moreover, that the proteins that interact with gamma-tubulin, including, most obviously, microtubule-organizing center proteins, must also be conserved. We have also found that a fivefold overexpression of S. pombe gamma-tubulin causes no reduction in growth rates or alteration of microtubule organization. We hypothesize that the excess gamma-tubulin is maintained in the cytoplasm in a form incapable of nucleating microtubule assembly. Finally, we have found that expression of human gamma-tubulin or overexpression of S. pombe gamma-tubulin causes no significant alteration of resistance to the antimicrotubule agents benomyl, thiabendazole and nocodazole.

Centrin plays an essential role in microtubule severing during flagellar excision in Chlamydomonas reinhardtii

Previously, we reported that flagellar excision in Chlamydomonas reinhardtii is mediated by an active process whereby microtubules are severed at select sites within the flagellar-basal body transition zone (Sanders, M. A., and J. L. Salisbury. 1989. J. Cell Biol. 108:1751-1760). At the time of flagellar excision, stellate fibers of the transition zone contract and displace the microtubule doublets of the axoneme inward. The resulting shear force and torsional load generated during inward displacement leads to microtubule severing immediately distal to the central cylinder of the transition zone. In this study, we have used a detergent-extracted cell model of Chlamydomonas that allows direct experimental access to the molecular machinery responsible for microtubule severing without the impediment of the plasma membrane. We present four independent lines of experimental evidence for the essential involvement of centrin-based stellate fibers of the transition zone in the process of flagellar excision: (a) Detergent-extracted cell models excise their flagella in response to elevated, yet physiological, levels of free calcium. (b) Extraction of cell models with buffers containing the divalent cation chelator EDTA leads to the disassembly of centrin-based fibers and to the disruption of transition zone stellate fiber structure. This treatment results in a complete loss of flagellar excision competence. (c) Three separate anti-centrin monoclonal antibody preparations, which localize to the stellate fibers of the transition zone, specifically inhibit contraction of the stellate fibers and block calcium-induced flagellar excision, while control antibodies have no inhibitory effect. Finally, (d) cells of the centrin mutant vfl-2 (Taillon, B., S. Adler, J. Suhan, and J. Jarvik. 1992. J. Cell Biol. 119:1613-1624) fail to actively excise their flagella following pH shock in living cells or calcium treatment of detergent-extracted cell models. Taken together, these observations demonstrate that centrin-based fiber contraction plays a fundamental role in microtubule severing at the time of flagellar excision in Chlamydomonas.

A protein related to brain microtubule-associated protein MAP1B is a component of the mammalian centrosome

The centrosome is the main microtubule organizing center of mammalian cells. Structurally, it is composed of a pair of centrioles surrounded by a fibro-granular material (the pericentriolar material) from which microtubules are nucleated. However, the nature of centrosomal molecules involved in microtubules nucleation is still obscure. Since brain microtubule-associated proteins (MAPs) lower the critical tubulin concentration required for microtubule nucleation in tubulin solution in vitro, we have examined their possible association with centrosomes. By immunofluorescence, monoclonal and polyclonal antibodies raised against MAP1B stain the centrosome in cultured cells as well as purified centrosomes, whereas antibodies raised against MAP2 give a completely negative reaction. The MAP1B-related antigen is localized to the pericentriolar material as revealed by immunoelectron microscopy. In preparations of purified centrosomes analyzed on poly-acrylamide gels, a protein that migrates as brain MAP1B is present. After blotting on nitrocellulose, it is decorated by anti-MAP1B antibodies and the amino acid sequence of proteolytic fragments of this protein is similar to brain MAP1B. Moreover, brain MAP1B and its centrosomal counterpart share the same phosphorylation features and have similar peptide maps. These data strongly suggest that a protein homologue to MAP1B is present in centrosomes and it is a good candidate for being involved in the nucleating activity of the pericentriolar material.

Cloning of a cDNA encoding human centrin, an EF-hand protein of centrosomes and mitotic spindle poles

A human cDNA expression library was screened using anti-centrin antibodies to obtain a cDNA clone encoding human centrin. The cDNA clone contains an open reading frame of 516 base pairs and predicts a product of 172 amino acids with a calculated molecular mass of 19,528 and a pI of 4.61. Sequence analysis demonstrates that human centrin and centrins from higher plants, protozoa, algae, Xenopus and the yeast CDC31 gene product are closely related members of a subfamily of the EF-hand superfamily of calcium-binding proteins. The human centrin sequence has four putative calcium-binding domains as defined by the EF-hand consensus. Immunoprecipitation and western blot studies from HeLa cells confirm that human centrin is a protein of approximately 20,000 M(r) as predicted from the cDNA clone. Indirect immunofluorescence analysis of HeLa cells demonstrates that centrin is localized at the centrosome of interphase cells and that it redistributes to the region of the spindle poles during mitosis. When taken together with earlier genetic studies, these results demonstrate that centrin is a ubiquitous component of centrosomes and mitotic spindle poles of diverse organisms and suggest that centrin plays a role in centrosome separation at the time of mitosis.