Functional architecture of the inner pore of a voltage-gated Ca2+ channel

Cav2.3 channel function and Zn2+-induced modulation: potential mechanisms and (patho)physiological relevance

Voltage-gated calcium channels (VGCCs) are critical for Ca²⁺ influx into all types of excitable cells, but their exact function is still poorly understood. Recent reconstruction of homology models for all human VGCCs at atomic resolution provides the opportunity for a structure-based discussion of VGCC function and novel insights into the mechanisms underlying Ca²⁺ selective flux through these channels. In the present review, we use these data as a basis to examine the structure, function, and Zn²⁺-induced modulation of Ca_v2.3 VGCCs, which mediate native R-type currents and belong to the most enigmatic members of the family. Their unique sensitivity to Zn²⁺ and the existence of multiple mechanisms of Zn²⁺ action strongly argue for a role of these channels in the modulatory action of endogenous loosely bound Zn²⁺, pools of which have been detected in a number of neuronal, endocrine, and reproductive tissues. Following a description of the different mechanisms by which Zn²⁺ has been shown or is thought to alter the function of these channels, we discuss their potential (patho)physiological relevance, taking into account what is known about the magnitude and function of extracellular Zn²⁺ signals in different tissues. While still far from complete, the picture that emerges is one where Ca_v2.3 channel expression parallels the occurrence of loosely bound Zn²⁺ pools in different tissues and where these channels may serve to translate physiological Zn²⁺ signals into changes of electrical activity and/or intracellular Ca²⁺ levels.

Congruent pattern of accessibility identifies minimal pore gate in a non-symmetric voltage-gated sodium channel

Opening and closing of the central ion-conducting pore in voltage-dependent ion channels is gated by changes in membrane potential. Although a gate residue in the eukaryotic voltage-gated sodium channel has been identified, the minimal molecular determinants of this gate region remain unknown. Here, by measuring the closed- and open-state reactivity of MTSET to substituted cysteines in all the pore-lining helices, we show that the state-dependent accessibility is delineated by four hydrophobic residues at homologous positions in each domain. Introduced cysteines above these sites do not react with intracellular MTSET while the channels are closed and yet are rapidly modified while the channels are open. These findings, in conjunction with state-dependent metal cross-bridging, support the notion that the gate residues in each of the four S6 segments of the eukaryotic sodium channel form an occlusion for ions in the closed state and are splayed open on activation.

Gating of the central pore in voltage-dependent ion channels is mediated by changes in membrane potential. Here, the authors use substituted cysteine accessibility and metal cross-bridging to identify gate residues that form a physical occlusion when closed in a eukaryotic voltage-gated sodium channel.

MDIMP, a novel cardiac Ca(2+) channel blocker with atrial selectivity

In cardiac muscle cells both T-and L-type Ca(2+) channels (TTCCs and LTCCs, respectively) are expressed, and the latter are relevant to a process known as excitation-contraction coupling (ECC). Evidence obtained from docking studies suggests that isoindolines derived from α-amino acids bind to the LTCC CaV1.2. In the present study, we investigated whether methyl (S)-2-(1,3-dihydroisoindol-2-yl)-4-methylpentanoate (MDIMP), which is derived from L-leucine, modulates both Ca(2+) channels and ECC. To this end, mechanical properties, as well as Ca(2+) transients and currents, were all investigated in isolated cardiac myocytes. The effects of MDIMP on CaV1.2 (transiently expressed in 293T/17 cells) were also studied. In this system, evidence was found for an inhibitory action that develops and recovers in min, with an IC50 of 450µM. With respect to myocytes: atrial-TTCCs, atrial-LTCCs, and ventricular-LTCCs were also inhibited, in that order of potency. Accordingly, Ca(2+) transients, contractions, and window currents of LTCCs were all reduced more strongly in atrial cells. Interestingly, while the modulation of LTCCs was state-independent in these cells, it was state-dependent, and dual, on the ventricular ones. Furthermore, practically all of the ventricular LTCCs were closed at resting membrane potentials. This could explain their resistance to MDIMP, as they were affected in only open or inactivated states. All these features in turn explain the preferential down-regulation of the atrial ECC. Thus, our results support the view that isoindolines bind to Ca(2+) channels, improve our knowledge of the corresponding structure-function relationship, and may be relevant for conditions where decreased atrial activity is desired.

Store-Operated Calcium Channels

Store-operated calcium channels (SOCs) are a major pathway for calcium signaling in virtually all metozoan cells and serve a wide variety of functions ranging from gene expression, motility, and secretion to tissue and organ development and the immune response. SOCs are activated by the depletion of Ca(2+) from the endoplasmic reticulum (ER), triggered physiologically through stimulation of a diverse set of surface receptors. Over 15 years after the first characterization of SOCs through electrophysiology, the identification of the STIM proteins as ER Ca(2+) sensors and the Orai proteins as store-operated channels has enabled rapid progress in understanding the unique mechanism of store-operate calcium entry (SOCE). Depletion of Ca(2+) from the ER causes STIM to accumulate at ER-plasma membrane (PM) junctions where it traps and activates Orai channels diffusing in the closely apposed PM. Mutagenesis studies combined with recent structural insights about STIM and Orai proteins are now beginning to reveal the molecular underpinnings of these choreographic events. This review describes the major experimental advances underlying our current understanding of how ER Ca(2+) depletion is coupled to the activation of SOCs. Particular emphasis is placed on the molecular mechanisms of STIM and Orai activation, Orai channel properties, modulation of STIM and Orai function, pharmacological inhibitors of SOCE, and the functions of STIM and Orai in physiology and disease.

Voltage-gated calcium channels: Determinants of channel function and modulation by inorganic cations

Voltage-gated calcium channels (VGCCs) represent a key link between electrical signals and non-electrical processes, such as contraction, secretion and transcription. Evolved to achieve high rates of Ca(2+)-selective flux, they possess an elaborate mechanism for selection of Ca(2+) over foreign ions. It has been convincingly linked to competitive binding in the pore, but the fundamental question of how this is reconcilable with high rates of Ca(2+) transfer remains unanswered. By virtue of their similarity to Ca(2+), polyvalent cations can interfere with the function of VGCCs and have proven instrumental in probing the mechanisms underlying selective permeation. Recent emergence of crystallographic data on a set of Ca(2+)-selective model channels provides a structural framework for permeation in VGCCs, and warrants a reconsideration of their diverse modulation by polyvalent cations, which can be roughly separated into three general mechanisms: (I) long-range interactions with charged regions on the surface, affecting the local potential sensed by the channel or influencing voltage-sensor movement by repulsive forces (electrostatic effects), (II) short-range interactions with sites in the ion-conducting pathway, leading to physical obstruction of the channel (pore block), and in some cases (III) short-range interactions with extracellular binding sites, leading to non-electrostatic modifications of channel gating (allosteric effects). These effects, together with the underlying molecular modifications, provide valuable insights into the function of VGCCs, and have important physiological and pathophysiological implications. Allosteric suppression of some of the pore-forming Cavα1-subunits (Cav2.3, Cav3.2) by Zn(2+) and Cu(2+) may play a major role for the regulation of excitability by endogenous transition metal ions. The fact that these ions can often traverse VGCCs can contribute to the detrimental intracellular accumulation of metal ions following excessive release of endogenous Cu(2+) and Zn(2+) or exposure to non-physiological toxic metal ions.

Hyperactivation of L-type voltage-gated Ca2+ channels in Caenorhabditis elegans striated muscle can result from point mutations in the IS6 or the IIIS4 segment of the α1 subunit

Several human diseases, including hypokalemic periodic paralysis and Timothy syndrome, are caused by mutations in voltage-gated calcium channels. The effects of these mutations are not always well understood, partially because of difficulties in expressing these channels in heterologous systems. The use of Caenorhabditis elegans could be an alternative approach to determine the effects of mutations on voltage-gated calcium channel function because all the main types of voltage-gated calcium channels are found in C. elegans, a large panel of mutations already exists and efficient genetic tools are available to engineer customized mutations in any gene. In this study, we characterize the effects of two gain-of-function mutations in egl-19, which encodes the L-type calcium channel α1 subunit. One of these mutations, ad695, leads to the replacement of a hydrophobic residue in the IIIS4 segment. The other mutation, n2368, changes a conserved glycine of IS6 segment; this mutation has been identified in patients with Timothy syndrome. We show that both egl-19 (gain-of-function) mutants have defects in locomotion and morphology that are linked to higher muscle tone. Using in situ electrophysiological approaches in striated muscle cells, we provide evidence that this high muscle tone is due to a shift of the voltage dependency towards negative potentials, associated with a decrease of the inactivation rate of the L-type Ca(2+) current. Moreover, we show that the maximal conductance of the Ca(2+) current is decreased in the strongest mutant egl-19(n2368), and that this decrease is correlated with a mislocalization of the channel.

Ion channel engineering: perspectives and strategies

Ion channels facilitate the passive movement of ions down an electrochemical gradient and across lipid bilayers in cells. This phenomenon is essential for life and underlies many critical homeostatic processes in cells. Ion channels are diverse and differ with respect to how they open and close (gating) and to their ionic conductance/selectivity (permeation). Fundamental understanding of ion channel structure-function mechanisms, their physiological roles, how their dysfunction leads to disease, their utility as biosensors, and development of novel molecules to modulate their activity are important and active research frontiers. In this review, we focus on ion channel engineering approaches that have been applied to investigate these aspects of ion channel function, with a major emphasis on voltage-gated ion channels.

L-type CaV1.2 calcium channels: from in vitro findings to in vivo function

The L-type Cav1.2 calcium channel is present throughout the animal kingdom and is essential for some aspects of CNS function, cardiac and smooth muscle contractility, neuroendocrine regulation, and multiple other processes. The L-type CaV1.2 channel is built by up to four subunits; all subunits exist in various splice variants that potentially affect the biophysical and biological functions of the channel. Many of the CaV1.2 channel properties have been analyzed in heterologous expression systems including regulation of the L-type CaV1.2 channel by Ca(2+) itself and protein kinases. However, targeted mutations of the calcium channel genes confirmed only some of these in vitro findings. Substitution of the respective serines by alanine showed that β-adrenergic upregulation of the cardiac CaV1.2 channel did not depend on the phosphorylation of the in vitro specified amino acids. Moreover, well-established in vitro phosphorylation sites of the CaVβ2 subunit of the cardiac L-type CaV1.2 channel were found to be irrelevant for the in vivo regulation of the channel. However, the molecular basis of some kinetic properties, such as Ca(2+)-dependent inactivation and facilitation, has been approved by in vivo mutagenesis of the CaV1.2α1 gene. This article summarizes recent findings on the in vivo relevance of well-established in vitro results.

A novel homology model of TRPC3 reveals allosteric coupling between gate and selectivity filter

Utilizing a novel molecular model of TRPC3, based on the voltage-gated sodium channel from Arcobacter butzleri (Na(V)AB) as template, we performed structure-guided mutagenesis experiments to identify amino acid residues involved in divalent permeation and gating. Substituted cysteine accessibility screening within the predicted selectivity filter uncovered amino acids 629-631 as the narrowest part of the permeation pathway with an estimated pore diameter of < 5.8Å. E630 was found to govern not only divalent permeability but also sensitivity of the channel to block by ruthenium red. Mutations in a hydrophobic cluster at the cytosolic termini of transmembrane segment 6, corresponding to the S6 bundle crossing structure in Na(V)AB, distorted channel gating. Removal of a large hydrophobic residue (I667A or I667E) generated channels with approximately 60% constitutive activity, suggesting I667 as part of the dynamic structure occluding the permeation path. Destabilization of the gate was associated with reduced Ca2+ permeability, altered cysteine cross-linking in the selectivity filter and promoted channel block by ruthenium red. Collectively, we present a structural model of the TRPC3 permeation pathway and localize the channel's selectivity filter and the occluding gate. Moreover, we provide evidence for allosteric coupling between the gate and the selectivity filter in TRPC3.

How "Pharmacoresistant" is Cav2.3, the Major Component of Voltage-Gated R-type Ca2+ Channels?

Membrane-bound voltage-gated Ca²⁺ channels (VGCCs) are targets for specific signaling complexes, which regulate important processes like gene expression, neurotransmitter release and neuronal excitability. It is becoming increasingly evident that the so called “resistant” (R-type) VGCC Ca_v2.3 is critical in several physiologic and pathophysiologic processes in the central nervous system, vascular system and in endocrine systems. However its eponymous attribute of pharmacologic inertness initially made in depth investigation of the channel difficult. Although the identification of SNX-482 as a fairly specific inhibitor of Ca_v2.3 in the nanomolar range has enabled insights into the channels properties, availability of other pharmacologic modulators of Ca_v2.3 with different chemical, physical and biological properties are of great importance for future investigations. Therefore the literature was screened systematically for molecules that modulate Ca_v2.3 VGCCs.

Structure and function of the β subunit of voltage-gated Ca²⁺ channels

The voltage-gated Ca²⁺ channel β subunit (Ca(v)β) is a cytosolic auxiliary subunit that plays an essential role in regulating the surface expression and gating properties of high-voltage activated (HVA) Ca²⁺ channels. It is also crucial for the modulation of HVA Ca²⁺ channels by G proteins, kinases, Ras-related RGK GTPases, and other proteins. There are indications that Ca(v)β may carry out Ca²⁺ channel-independent functions. Ca(v)β knockouts are either non-viable or result in a severe pathophysiology, and mutations in Ca(v)β have been implicated in disease. In this article, we review the structure and various biological functions of Ca(v)β, as well as recent advances. This article is part of a Special Issue entitled: Calcium channels.

Neutralisation of a single voltage sensor affects gating determinants in all four pore-forming S6 segments of Ca(V)1.2: a cooperative gating model

Voltage sensors trigger the closed-open transitions in the pore of voltage-gated ion channels. To probe the transmission of voltage sensor signalling to the channel pore of Ca(V)1.2, we investigated how elimination of positive charges in the S4 segments (charged residues were replaced by neutral glutamine) modulates gating perturbations induced by mutations in pore-lining S6 segments. Neutralisation of all positively charged residues in IIS4 produced a functional channel (IIS4(N)), while replacement of the charged residues in IS4, IIIS4 and IVS4 segments resulted in nonfunctional channels. The IIS4(N) channel displayed activation kinetics similar to wild type. Mutations in a highly conserved structure motif on S6 segments ("GAGA ring": G432W in IS6, A780T in IIS6, G1193T in IIIS6 and A1503G in IVS6) induce strong left-shifted activation curves and decelerated channel deactivation kinetics. When IIS4(N) was combined with these mutations, the activation curves were shifted back towards wild type and current kinetics were accelerated. In contrast, 12 other mutations adjacent to the GAGA ring in IS6-IVS6, which also affect activation gating, were not rescued by IIS4(N). Thus, the rescue of gating distortions in segments IS6-IVS6 by IIS4(N) is highly position-specific. Thermodynamic cycle analysis supports the hypothesis that IIS4 is energetically coupled with the distantly located GAGA residues. We speculate that conformational changes caused by neutralisation of IIS4 are not restricted to domain II (IIS6) but are transmitted to gating structures in domains I, III and IV via the GAGA ring.

Permeation, selectivity and gating in store-operated CRAC channels

Store-operated Ca(2+) release-activated Ca(2+) (CRAC) channels are a widespread mechanism for generating cellular Ca(2+) signals and regulate many Ca(2+)-dependent functions, including transcription, motility and proliferation. The opening of CRAC channels in response to depletion of intracellular Ca(2+) stores involves a cascade of cellular events that culminate in direct interactions between STIM1, the endoplasmic reticulum Ca(2+) sensor, and the channels composed of Orai proteins. Evidence gathered over the last two decades indicates that CRAC channels display a unique functional pore fingerprint characterized by exquisite Ca(2+) selectivity, low unitary conductance, and low permeability to large cations. Here, we review the key pore properties of CRAC channels and discuss recent progress in addressing the molecular foundations of these properties. Structure-function and cysteine-scanning studies have revealed the identity and organization of pore-lining residues, including those that form the selectivity filter, providing a structural framework for understanding CRAC channel pore properties. Recent studies in pore mutants that produce STIM1-independent constitutive channel activation indicate that exquisite Ca(2+) selectivity in CRAC channels is not hardwired into Orai proteins, but is instead manifested only following the binding of STIM1 to the intrinsically poorly Ca(2+)-selective Orai channels. These findings reveal new functional aspects of CRAC channels and suggest that the selectivity filter of the CRAC channel is a dynamic structure whose conformation and functional properties are powerfully regulated by the channel activation stimulus.

Ca(2+) signalling by IP(3) receptors

The Ca(2) (+) signals evoked by inositol 1,4,5-trisphosphate (IP(3)) are built from elementary Ca(2) (+) release events involving progressive recruitment of IP(3) receptors (IP(3)R), intracellular Ca(2) (+) channels that are expressed in almost all animal cells. The smallest events ('blips') result from opening of single IP(3)R. Larger events ('puffs') reflect the near-synchronous opening of a small cluster of IP(3)R. These puffs become more frequent as the stimulus intensity increases and they eventually trigger regenerative Ca(2) (+) waves that propagate across the cell. This hierarchical recruitment of IP(3)R is important in allowing Ca(2) (+) signals to be delivered locally to specific target proteins or more globally to the entire cell. Co-regulation of IP(3)R by Ca(2) (+) and IP(3), the ability of a single IP(3)R rapidly to mediate a large efflux of Ca(2) (+) from the endoplasmic reticulum, and the assembly of IP(3)R into clusters are key features that allow IP(3)R to propagate Ca(2) (+) signals regeneratively. We review these properties of IP(3)R and the structural basis of IP(3)R behavior.

Domain III regulates N-type (CaV2.2) calcium channel closing kinetics

Ca(V)2.2 (N-type) and Ca(V)1.2 (L-type) calcium channels gate differently in response to membrane depolarization, which is critical to the unique physiological functions mediated by these channels. We wondered if the source for these differences could be identified. As a first step, we examined the effect of domain exchange between N-type and L-type channels on activation-deactivation kinetics, which were significantly different between these channels. Kinetic analysis of chimeric channels revealed N-channel-like deactivation for all chimeric channels containing N-channel domain III, while activation appeared to be a more distributed function across domains. This led us to hypothesize that domain III was an important regulator of N-channel closing. This idea was further examined with R-roscovitine, which is a trisubstituted purine that slows N-channel deactivation by exclusively binding to activated N-channels. L-channels lack this response to roscovitine, which allowed us to use N-L chimeras to test the role of domain III in roscovitine modulation of N-channel deactivation. In support of our hypothesis, all chimeric channels containing the N-channel domain III responded to roscovitine with slowed deactivation, while those chimeric channels with L-channel domain III did not. Thus a combination of kinetic and pharmacological evidence supports the hypothesis that domain III is an important regulator of N-channel closing. Our results support specialization of gating functions among calcium channel domains.

A molecular model of the inner pore of the Ca channel in its open state

Structure of the Ca channel open pore is unlikely to be the same as that of the K channel because Ca channels do not contain the hinge residues Gly or Pro. The Ca channel does not have a wide entry into the inner pore, as is found in K channels. First we sought to simulate the open state of the Ca channel by modeling forced opening of the KcsA channel using a procedure of restrained minimization with distance constraints at the level of the α-helical bundle, corresponding to segments Thr-107-Val-115. This produced an intermediate open state, which was populated by amino acid residues of Ca channels and then successively optimized until the opening of the pore reached a diameter of about 10 Å, large enough to allow verapamil to enter and block the Ca channel from inside. Although this approach produced a sterically plausible structure, it was in significant disagreement with the MTSET accessibility data for single cysteine mutations of S6 segments of the P/Q channel(1) that do not fit with an α-helical pattern. Last we explored the idea that the four S6 segments of Ca channels may contain intra-molecular deformations that lead to reorientation of its side chains. After introduction of π-bulges, the model agreed with the MTSET accessibility data. MTSET modification of a cysteine at the C-end of only one S6 could produce physical occlusion and block of the inner pore of the open Ca channel, as observed experimentally, and as expected if the pore opening is narrower than that of K channels.

Identification of new batrachotoxin-sensing residues in segment IIIS6 of the sodium channel

Ion permeation through voltage-gated sodium channels is modulated by various drugs and toxins. The atomistic mechanisms of action of many toxins are poorly understood. A steroidal alkaloid batrachotoxin (BTX) causes persistent channel activation by inhibiting inactivation and shifting the voltage dependence of activation to more negative potentials. Traditionally, BTX is considered to bind at the channel-lipid interface and allosterically modulate the ion permeation. However, amino acid residues critical for BTX action are found in the inner helices of all four repeats, suggesting that BTX binds in the pore. In the octapeptide segment IFGSFFTL in IIIS6 of a cockroach sodium channel BgNa(V), besides Ser_3i15 and Leu_3i19, which correspond to known BTX-sensing residues of mammalian sodium channels, we found that Gly_3i14 and Phe_3i16 are critical for BTX action. Using these data along with published data as distance constraints, we docked BTX in the Kv1.2-based homology model of the open BgNa(V) channel. We arrived at a model in which BTX adopts a horseshoe conformation with the horseshoe plane normal to the pore axis. The BTX ammonium group is engaged in cation-π interactions with Phe_3i16 and BTX moieties interact with known BTX-sensing residues in all four repeats. Oxygen atoms at the horseshoe inner surface constitute a transient binding site for permeating cations, whereas the bulky BTX molecule would resist the pore closure, thus causing persistent channel activation. Our study reinforces the concept that steroidal sodium channel agonists bind in the inner pore of sodium channels and elaborates the atomistic mechanism of BTX action.

The ß subunit of voltage-gated Ca2+ channels

Calcium regulates a wide spectrum of physiological processes such as heartbeat, muscle contraction, neuronal communication, hormone release, cell division, and gene transcription. Major entryways for Ca(2+) in excitable cells are high-voltage activated (HVA) Ca(2+) channels. These are plasma membrane proteins composed of several subunits, including α(1), α(2)δ, β, and γ. Although the principal α(1) subunit (Ca(v)α(1)) contains the channel pore, gating machinery and most drug binding sites, the cytosolic auxiliary β subunit (Ca(v)β) plays an essential role in regulating the surface expression and gating properties of HVA Ca(2+) channels. Ca(v)β is also crucial for the modulation of HVA Ca(2+) channels by G proteins, kinases, and the Ras-related RGK GTPases. New proteins have emerged in recent years that modulate HVA Ca(2+) channels by binding to Ca(v)β. There are also indications that Ca(v)β may carry out Ca(2+) channel-independent functions, including directly regulating gene transcription. All four subtypes of Ca(v)β, encoded by different genes, have a modular organization, consisting of three variable regions, a conserved guanylate kinase (GK) domain, and a conserved Src-homology 3 (SH3) domain, placing them into the membrane-associated guanylate kinase (MAGUK) protein family. Crystal structures of Ca(v)βs reveal how they interact with Ca(v)α(1), open new research avenues, and prompt new inquiries. In this article, we review the structure and various biological functions of Ca(v)β, with both a historical perspective as well as an emphasis on recent advances.

Physicochemical properties of pore residues predict activation gating of Ca V1.2: a correlation mutation analysis

Single point mutations in pore-forming S6 segments of calcium channels may transform a high-voltage-activated into a low-voltage-activated channel, and resulting disturbances in calcium entry may cause channelopathies (Hemara-Wahanui et al., Proc Natl Acad Sci U S A 102(21):7553–7558, 16). Here we ask the question how physicochemical properties of amino acid residues in gating-sensitive positions on S6 segments determine the threshold of channel activation of Ca_V1.2. Leucine in segment IS6 (L434) and a newly identified activation determinant in segment IIIS6 (G1193) were mutated to a variety of amino acids. The induced leftward shifts of the activation curves and decelerated current activation and deactivation suggest a destabilization of the closed and a stabilisation of the open channel state by most mutations. A selection of 17 physicochemical parameters (descriptors) was calculated for these residues and examined for correlation with the shifts of the midpoints of the activation curve (ΔV_act). ΔV_act correlated with local side-chain flexibility in position L434 (IS6), with the polar accessible surface area of the side chain in position G1193 (IIIS6) and with hydrophobicity in position I781 (IIS6). Combined descriptor analysis for positions I781 and G1193 revealed that additional amino acid properties may contribute to conformational changes during the gating process. The identified physicochemical properties in the analysed gating-sensitive positions (accessible surface area, side-chain flexibility, and hydrophobicity) predict the shifts of the activation curves of Ca_V1.2.

A homology model of the pore domain of a voltage-gated calcium channel is consistent with available SCAM data

In the absence of x-ray structures of calcium channels, their homology models are used to rationalize experimental data and design new experiments. The modeling relies on sequence alignments between calcium and potassium channels. Zhen et al. (2005. J. Gen. Physiol. doi:10.1085/jgp.200509292) used the substituted cysteine accessibility method (SCAM) to identify pore-lining residues in the Ca_v2.1 channel and concluded that their data are inconsistent with the symmetric architecture of the pore domain and published sequence alignments between calcium and potassium channels. Here, we have built K_v1.2-based models of the Ca_v2.1 channel with 2-(trimethylammonium)ethyl methanethiosulfonate (MTSET)-modified engineered cysteines and used Monte Carlo energy minimizations to predict their energetically optimal orientations. We found that depending on the position of an engineered cysteine in S6 and S5 helices, the ammonium group in the long flexible MTSET-modified side chain can orient into the inner pore, an interface between domains (repeats), or an interface between S5 and S6 helices. Different local environments of equivalent positions in the four repeats can lead to different SCAM results. The reported current inhibition by MTSET generally decreases with the predicted distances between the ammonium nitrogen and the pore axis. A possible explanation for outliers of this correlation is suggested. Our calculations rationalize the SCAM data, validate one of several published sequence alignments between calcium and potassium channels, and suggest similar spatial dispositions of S5 and S6 helices in voltage-gated potassium and calcium channels.

Regulation of voltage-gated Ca2+ channels by lipids

Great skepticism has surrounded the question of whether modulation of voltage-gated Ca(2+) channels (VGCCs) by the polyunsaturated free fatty acid arachidonic acid (AA) has any physiological basis. Here we synthesize findings from studies of both native and recombinant channels where micromolar concentrations of AA consistently inhibit both native and recombinant activity by stabilizing VGCCs in one or more closed states. Structural requirements for these inhibitory actions include a chain length of at least 18 carbons and multiple double bonds located near the fatty acid's carboxy terminus. Acting at a second site, AA increases the rate of VGCC activation kinetics, and in Ca(V)2.2 channels, increases current amplitude. We present evidence that phosphatidylinositol 4,5-bisphosphate (PIP(2)), a palmitoylated accessory subunit (beta(2a)) of VGCCs and AA appear to have overlapping sites of action giving rise to complex channel behavior. Their actions converge in a physiologically relevant manner during muscarinic modulation of VGCCs. We speculate that M(1) muscarinic receptors may stimulate multiple lipases to break down the PIP(2) associated with VGCCs and leave PIP(2)'s freed fatty acid tails bound to the channels to confer modulation. This unexpectedly simple scheme gives rise to unanticipated predictions and redirects thinking about lipid regulation of VGCCs.

Structural model for dihydropyridine binding to L-type calcium channels

1,4-Dihydropyridines (DHPs) constitute a major class of ligands for L-type Ca(2+) channels (LTCC). The DHPs have a boat-like, six-membered ring with an NH group at the stern, an aromatic moiety at the bow, and substituents at the port and starboard sides. Various DHPs exhibit antagonistic or agonistic activities, which were previously explained as stabilization or destabilization, respectively, of the closed activation gate by the portside substituents. Here we report a novel structural model in which agonist and antagonist activities are determined by different parts of the DHP molecule and have different mechanisms. In our model, which is based on Monte Carlo minimizations of DHP-LTCC complexes, the DHP moieties at the stern, bow, and starboard form H-bonds with side chains of the key DHP-sensing residues Tyr_IIIS6, Tyr_IVS6, and Gln_IIIS5, respectively. We propose that these H-bonds, which are common for agonists and antagonists, stabilize the LTCC conformation with the open activation gate. This explains why both agonists and antagonists increase probability of the long lasting channel openings and why even partial disruption of the contacts eliminates the agonistic action. In our model, the portside approaches the selectivity filter. Hydrophobic portside of antagonists may induce long lasting channel closings by destabilizing Ca(2+) binding to the selectivity filter glutamates. Agonists have either hydrophilic substituents or a hydrogen atom at their portside, and thus lack this destabilizing effect. The predicted orientation of the DHP core allows accommodation of long substituents in the domain interface or in the inner pore. Our model may be useful for developing novel clinically relevant LTCC blockers.

Coupled and independent contributions of residues in IS6 and IIS6 to activation gating of CaV1.2

Voltage dependence and kinetics of Ca(V)1.2 activation are affected by structural changes in pore-lining S6 segments of the alpha(1)-subunit. Significant effects are induced by either proline or threonine substitutions in the lower third of segment IIS6 ("bundle crossing region"), where S6 segments are likely to seal the channel in the closed conformation (Hohaus, A., Beyl, S., Kudrnac, M., Berjukow, S., Timin, E. N., Marksteiner, R., Maw, M. A., and Hering, S. (2005) J. Biol. Chem. 280, 38471-38477). Here we report that S435P in IS6 results in a large shift of the activation curve (-25.9 +/- 1.2 mV) and slower current kinetics. Threonine substitutions at positions Leu-429 and Leu-434 induced a similar kinetic phenotype with shifted activation curves (L429T by -6.6 +/- 1.2 and L434T by -12.1 +/- 1.7 mV). Inactivation curves of all mutants were shifted to comparable extents as the activation curves. Interdependence of IS6 and IIS6 mutations was analyzed by means of mutant cycle analysis. Double mutations in segments IS6 and IIS6 induce either additive (L429T/I781T, -34.1 +/- 1.4 mV; L434T/I781T, -40.4 +/- 1.3 mV; L429T/L779T, -12.6 +/- 1.3 mV; and L434T/L779T, -22.4 +/- 1.3 mV) or nonadditive shifts of the activation curves along the voltage axis (S435P/I781T, -33.8 +/- 1.4 mV). Mutant cycle analysis revealed energetic coupling between residues Ser-435 and Ile-781, whereas other paired mutations in segments IS6 and IIS6 had independent effects on activation gating.

Bimane fluorescence scanning suggests secondary structure near the S3-S4 linker of BK channels

Gating of large conductance Ca(2+)-activated K(+) channels (BK or maxi-K channels) is controlled by a Ca(2+)-sensor, formed by the channel cytoplasmic C-terminal domain, and a voltage sensor, formed by its S0-S4 transmembrane helices. Here we analyze structural properties of a portion of the BK channel voltage sensing domain, the S3-S4 linker, using fluorescence lifetime spectroscopy. Single residues in the S3-S4 linker region were substituted with cysteine, and the cysteine-substituted mutants were expressed in CHO cells and covalently labeled with the sulfhydryl-reactive fluorophore monobromo-trimethylammonio-bimane (qBBr). qBBr fluorescence is quenched by tryptophan and, to a lesser extent, tyrosine side chains. We found that qBBr fluorescence in several of the labeled cysteine-substituted channels shows position-specific quenching, as indicated by increase of the brief lifetime component of the qBBr fluorescence decay. Quenching was reduced with the mutation W203F (in the S4 segment), suggesting that Trp-203 acts as a quenching group. Our results suggest a working hypothesis for the secondary structure of the BK channel S3-S4 region, and places residues Leu-204, Gly-205, and Leu-206 within the extracellular end of the S4 helix.

Origin of the voltage dependence of G-protein regulation of P/Q-type Ca2+ channels

G-protein (Gbetagamma)-mediated voltage-dependent inhibition of N- and P/Q-type Ca(2+) channels contributes to presynaptic inhibition and short-term synaptic plasticity. The voltage dependence derives from the dissociation of Gbetagamma from the inhibited channels, but the underlying molecular and biophysical mechanisms remain largely unclear. In this study we investigated the role in this process of Ca(2+) channel beta subunit (Ca(v)beta) and a rigid alpha-helical structure between the alpha-interacting domain (AID), the primary Ca(v)beta docking site on the channel alpha(1) subunit, and the pore-lining IS6 segment. Gbetagamma inhibition of P/Q-type channels was reconstituted in giant inside-out membrane patches from Xenopus oocytes. Large populations of channels devoid of Ca(v)beta were produced by washing out a mutant Ca(v)beta with a reduced affinity for the AID. These beta-less channels were still inhibited by Gbetagamma, but without any voltage dependence, indicating that Ca(v)beta is indispensable for voltage-dependent Gbetagamma inhibition. A truncated Ca(v)beta containing only the AID-binding guanylate kinase (GK) domain could fully confer voltage dependence to Gbetagamma inhibition. Gbetagamma did not alter inactivation properties, and channels recovered from Gbetagamma inhibition exhibited the same activation property as un-inhibited channels, indicating that Gbetagamma does not dislodge Ca(v)beta from the inhibited channel. Furthermore, voltage-dependent Gbetagamma inhibition was abolished when the rigid alpha-helix between the AID and IS6 was disrupted by insertion of multiple glycines, which also eliminated Ca(v)beta regulation of channel gating, revealing a pivotal role of this rigid alpha-helix in both processes. These results suggest that depolarization-triggered movement of IS6, coupled to the subsequent conformational change of the Gbetagamma-binding pocket through a rigid alpha-helix induced partly by the Ca(v)beta GK domain, causes the dissociation of Gbetagamma and is fundamental to voltage-dependent Gbetagamma inhibition.

Models of the structure and gating mechanisms of the pore domain of the NaChBac ion channel

The NaChBac prokaryotic sodium channel appears to be a descendent of an evolutionary link between voltage-gated K(V) and Ca(V) channels. Like K(V) channels, four identical six-transmembrane subunits comprise the NaChBac channel, but its selectivity filter possesses a signature sequence of eukaryotic Ca(V) channels. We developed structural models of the NaChBac channel in closed and open conformations, using K(+)-channel crystal structures as initial templates. Our models were also consistent with numerous experimental results and modeling criteria. This study concerns the pore domain. The major differences between our models and K(+) crystal structures involve the latter portion of the selectivity filter and the bend region in S6 of the open conformation. These NaChBac models may serve as a stepping stone between K(+) channels of known structure and Na(V), Ca(V), and TRP channels of unknown structure.

Pore stability and gating in voltage-activated calcium channels

Calcium channel family members activate at different membrane potentials, which enables tissue specific calcium entry. Pore mutations affecting this voltage dependence are associated with channelopathies. In this review we analyze the link between voltage sensitivity and corresponding kinetic phenotypes of calcium channel activation. Systematic changes in hydrophobicity in the lower third of S6 segments gradually shift the activation curve thereby determining the voltage sensitivity. Homology modeling suggests that hydrophobic residues that are located in all four S6 segments close to the inner channel mouth might form adhesion points stabilizing the closed gate. Simulation studies support a scenario where voltage sensors and the pore are essentially independent structural units. We speculate that evolution designed the voltage sensing machinery as robust "all-or-non" device while the varietys of voltage sensitivities of different channel types was accomplished by shaping pore stability.

The Role of Distal S6 Hydrophobic Residues in the Voltage-dependent Gating of CaV2.3 Channels

The hydrophobic locus VAVIM is conserved in the S6 transmembrane segment of domain IV (IVS6) in Ca(V)1 and Ca(V)2 families. Herein we show that glycine substitution of the VAVIM motif in Ca(V)2.3 produced whole cell currents with inactivation kinetics that were either slower (A1719G approximately V1720G), similar (V1718G), or faster (I1721G approximately M1722G) than the wild-type channel. The fast kinetics of I1721G were observed with a approximately +10 mV shift in its voltage dependence of activation (E(0.5,act)). In contrast, the slow kinetics of A1719G and V1720G were accompanied by a significant shift of approximately -20 mV in their E(0.5,act) indicating that the relative stability of the channel closed state was decreased in these mutants. Glycine scan performed with Val (349) in IS6, Ile(701) in IIS6, and Leu(1420) in IIIS6 at positions predicted to face Val(1720) in IVS6 also produced slow inactivating currents with hyperpolarizing shifts in the activation and inactivation potentials, again pointing out a decrease in the stability of the channel closed state. Mutations to other hydrophobic residues at these positions nearly restored the channel gating. Altogether these data indicate that residues at positions equivalent to 1720 exert a critical control upon the relative stability of the channel closed and open states and more specifically, that hydrophobic residues at these positions promote the channel closed state. We discuss a three-dimensional homology model of Ca(V)2.3 based upon Kv1.2 where hydrophobic residues at positions facing Val(1720) in IS6, IIS6, and IIIS6 play a critical role in stabilizing the closed state in Ca(V)2.3.

The Role of the GX9GX3G Motif in the Gating of High Voltage-activated Ca2+ Channels

The putative hinge point revealed by the crystal structure of the MthK potassium channel is a glycine residue that is conserved in many ion channels. In high voltage-activated (HVA) Ca(V) channels, the mid-S6 glycine residue is only present in IS6 and IIS6, corresponding to G422 and G770 in Ca(V)1.2. Two additional glycine residues are found in the distal portion of IS6 (Gly(432) and Gly(436) in Ca(V)1.2) to form a triglycine motif unique to HVA Ca(V) channels. Lethal arrhythmias are associated with mutations of glycine residues in the human L-type Ca(2+) channel. Hence, we undertook a mutational analysis to investigate the role of S6 glycine residues in channel gating. In Ca(V)1.2, alpha-helix-breaking proline mutants (G422P and G432P) as well as the double G422A/G432A channel did not produce functional channels. The macroscopic inactivation kinetics were significantly decreased with Ca(V)1.2 wild type > G770A > G422A congruent with G436A >> G432A (from the fastest to the slowest). Mutations at position Gly(432) produced mostly nonfunctional mutants. Macroscopic inactivation kinetics were markedly reduced by mutations of Gly(436) to Ala, Pro, Tyr, Glu, Arg, His, Lys, or Asp residues with stronger effects obtained with charged and polar residues. Mutations within the distal GX(3)G residues blunted Ca(2+)-dependent inactivation kinetics and prevented the increased voltage-dependent inactivation kinetics brought by positively charged residues in the I-II linker. In Ca(V)2.3, mutation of the distal glycine Gly(352) impacted significantly on the inactivation gating. Altogether, these data highlight the role of the GX(3)G motif in the voltage-dependent activation and inactivation gating of HVA Ca(V) channels with the distal glycine residue being mostly involved in the inactivation gating.

A single amino acid mutation attenuates rundown of voltage-gated calcium channels

The activity of voltage-gated calcium channels (VGCCs) decreases with time in whole-cell and inside-out patch-clamp recordings. In this study we found that substituting a single amino acid (I1520) at the intracellular end of IIIS6 in the alpha(1) subunit of P/Q-type Ca(2+) channels with histidine or aspartate greatly attenuated channel rundown in inside-out patch-clamp recordings. The homologous mutations also slowed rundown of N- and L-type Ca(2+) channels, albeit to a lesser degree. In P/Q-type channels, the attenuation of rundown is accompanied by an increased apparent affinity for phosphatidylinositol-4,5-bisphosphate, which has been shown to be critical for maintaining Ca(2+) channel activity [L. Wu, C.S. Bauer, X.-G. Zhen, C. Xie, J. Yang, Dual regulation of voltage-gated calcium channels by PtdIns(4,5)P2. Nature 419 (2002) 947-952]. Furthermore, the histidine mutation significantly stabilized the open state, making the channels easier to open, slower to close, harder to inactivate and faster to recover from inactivation. Our finding that mutation of a single amino acid can greatly attenuate rundown provides an easy and efficient way to slow the rundown of VGCCs, facilitating functional studies that require direct access to the cytoplasmic side of the channel.

Localization of the activation gate of a voltage-gated Ca2+ channel

Ion channels open and close in response to changes in transmembrane voltage or ligand concentration. Recent studies show that K⁺ channels possess two gates, one at the intracellular end of the pore and the other at the selectivity filter. In this study we determined the location of the activation gate in a voltage-gated Ca²⁺ channel (VGCC) by examining the open/closed state dependence of the rate of modification by intracellular methanethiosulfonate ethyltrimethylammonium (MTSET) of pore-lining cysteines engineered in the S6 segments of the α1 subunit of P/Q type Ca²⁺ channels. We found that positions above the putative membrane/cytoplasm interface, including two positions below the corresponding S6 bundle crossing in K⁺ channels, showed pronounced state-dependent accessibility to internal MTSET, reacting ∼1,000-fold faster with MTSET in the open state than in the closed state. In contrast, a position at or below the putative membrane/cytoplasm interface was modified equally rapidly in both the open and closed states. Our results suggest that the S6 helices of the α1 subunit of VGCCs undergo conformation changes during gating and the activation gate is located at the intracellular end of the pore.