Highly coupled transport can be achieved in free-exchange transport models

Kinetic Diagram Analysis: A Python Library for Calculating Steady-State Observables of Kinetic Systems Analytically

Kinetic diagrams are commonly used to represent biochemical systems in order to study phenomena such as free energy transduction and ion selectivity. While numerical methods are commonly used to analyze such kinetic networks, the diagram method by King, Altman and Hill makes it possible to construct exact algebraic expressions for steady-state observables in terms of the rate constants of the kinetic diagram. However, manually obtaining these expressions becomes infeasible for models of even modest complexity as the number of the required intermediate diagrams grows with the factorial of the number of states in the diagram. We developed Kinetic Diagram Analysis (KDA), a Python library that programmatically generates the relevant diagrams and expressions from a user-defined kinetic diagram. KDA outputs symbolic expressions for state probabilities and cycle fluxes at steady-state that can be symbolically manipulated and evaluated to quantify macroscopic system observables. We demonstrate the KDA approach for examples drawn from the biophysics of active secondary transmembrane transporters. For a generic 6-state antiporter model, we show how the introduction of a single leakage transition reduces transport efficiency by quantifying substrate turnover. We apply KDA to a real-world example, the 8-state free exchange model of the small multidrug resistance transporter EmrE of Hussey et al (J General Physiology 152 (2020), e201912437), where a change in transporter phenotype is achieved by biasing two different subsets of kinetic rates: alternating access and substrate unbinding rates. KDA is made available as open source software under the GNU General Public License version 3.

A Small Multidrug Resistance Transporter in Pseudomonas aeruginosa Confers Substrate-Specific Resistance or Susceptibility

Small Multidrug Resistance (SMR) transporters are key players in the defense of multidrug-resistant pathogens to toxins and other homeostasis-perturbing compounds. However, recent evidence demonstrates that EmrE, an SMR from Escherichia coli and a model for understanding transport, can also induce susceptibility to some compounds by drug-gated proton leak. This runs down the ΔpH component of the Proton Motive Force (PMF), reducing viability of the affected bacteria. Proton leak may provide an unexplored drug target distinct from the targets of most known antibiotics. Activating proton leak requires an SMR to be merely present, rather than be the primary resistance mechanism, and dissipates the energy source for many other efflux pumps. PAsmr, an EmrE homolog from P. aeruginosa, transports many EmrE substrates in cells and purified systems. We hypothesized that PAsmr, like EmrE, may confer susceptibility to some compounds via drug-gated proton leak. Growth assays of E. coli expressing PAsmr displayed substrate-dependent resistance and susceptibility phenotypes, and in vitro solid-supported membrane electrophysiology experiments revealed that PAsmr performs both antiport and substrate-gated proton uniport, demonstrating the same functional promiscuity observed in EmrE. Growth assays of P. aeruginosa strain PA14 demonstrated that PAsmr contributes resistance to some antimicrobial compounds, but no growth defect is observed with susceptibility substrates, suggesting P. aeruginosa can compensate for the proton leak occurring through PAsmr. These phenotypic differences between P. aeruginosa and E. coli advance our understanding of underlying resistance mechanisms in P. aeruginosa and prompt further investigation into the role that SMRs play in antibiotic resistance in pathogens.

Functional promiscuity of small multidrug resistance transporters from Staphylococcus aureus, Pseudomonas aeruginosa, and Francisella tularensis

Small multidrug resistance transporters efflux toxic compounds from bacteria and are a minimal system to understand multidrug transport. Most previous studies have focused on EmrE, the model SMR from Escherichia coli, finding that EmrE has a broader substrate profile than previously thought and that EmrE may perform multiple types of transport, resulting in substrate-dependent resistance or susceptibility. Here, we performed a broad screen to identify potential substrates of three other SMRs: PAsmr from Pseudomonas aeruginosa; FTsmr from Francisella tularensis; and SAsmr from Staphylococcus aureus. This screen tested metabolic differences in E. coli expressing each transporter versus an inactive mutant, for a clean comparison of sequence and substrate-specific differences in transporter function, and identified many substrates for each transporter. In general, resistance compounds were charged, and susceptibility substrates were uncharged, but hydrophobicity was not correlated with phenotype. Two resistance hits and two susceptibility hits were validated via growth assays and IC50 calculations. Susceptibility is proposed to occur via substrate-gated proton leak, and the addition of bicarbonate antagonizes the susceptibility phenotype, consistent with this hypothesis.

From Average Transient Transporter Currents to Microscopic Mechanism─A Bayesian Analysis

Electrophysiology studies of secondary active transporters have revealed quantitative mechanistic insights over many decades of research. However, the emergence of new experimental and analytical approaches calls for investigation of the capabilities and limitations of the newer methods. We examine the ability of solid-supported membrane electrophysiology (SSME) to characterize discrete-state kinetic models with >10 rate constants. We use a Bayesian framework applied to synthetic data for three tasks: to quantify and check (i) the precision of parameter estimates under different assumptions, (ii) the ability of computation to guide the selection of experimental conditions, and (iii) the ability of our approach to distinguish among mechanisms based on SSME data. When the general mechanism, i.e., event order, is known in advance, we show that a subset of kinetic parameters can be "practically identified" within ∼1 order of magnitude, based on SSME current traces that visually appear to exhibit simple exponential behavior. This remains true even when accounting for systematic measurement bias and realistic uncertainties in experimental inputs (concentrations) are incorporated into the analysis. When experimental conditions are optimized or different experiments are combined, the number of practically identifiable parameters can be increased substantially. Some parameters remain intrinsically difficult to estimate through SSME data alone, suggesting that additional experiments are required to fully characterize parameters. We also demonstrate the ability to perform model selection and determine the order of events when that is not known in advance, comparing Bayesian and maximum-likelihood approaches. Finally, our studies elucidate good practices for the increasingly popular but subtly challenging Bayesian calculations for structural and systems biology.

Comprehending conformational changes in EmrE, multidrug transporter at different pH: insights from molecular dynamics simulations

EmrE is a small multidrug resistance (SMR) pump of antiparallel topology that confers resistance to a broad range of polyaromatic cations in Escherichia coli. Atomic-level understanding of conformational changes for the selectivity of substrate and transport of a diverse array of drugs through the smallest known efflux pumps is crucial to multi-drug resistance. Therefore, the present study aims to provide insights into conformational changes during the transport through EmrE transporter at different pH. Molecular dynamics simulations have been carried out on the complete structure of EmrE in the absence of substrate. Computational analyses such as secondary structure, principal component, dynamic cross-correlation matrix, and hydrogen bond calculations have been performed. Analysis of MD trajectories in this study revealed pH-dependent interactions that influenced the structural dynamics of EmrE. Notably, at high pH, Glu14 and Tyr60 in both monomers formed electrostatic interactions, while these interactions decreased significantly at a low pH. Interestingly, a kink at helix 3 (H3) and dual open conformation of EmrE at low pH were also observed in contrast to a closed state discerned towards the periplasmic side at high pH. Significant interactions between C-terminal residues and residues at the edge of H1 & Loop1 and H3 & Loop3 were identified, suggesting their role in stabilizing the closed conformation of EmrE at the periplasmic end under high pH conditions. The present study enhances our understanding of EmrE's conformational changes, shedding light on the pH-dependent mechanisms that are likely to impact its function in multi-drug resistance.Communicated by Ramaswamy H. Sarma.

Microsecond Motion of the Bacterial Transporter EmrE in Lipid Bilayers

The bacterial transporter EmrE is a homo-dimeric membrane protein that effluxes cationic polyaromatic substrates against the concentration gradient by coupling to proton transport. As the archetype of the small multidrug resistance family of transporters, EmrE structure and dynamics provide atomic insights into the mechanism of transport by this family of proteins. We recently determined high-resolution structures of EmrE in complex with a cationic substrate, tetra(4-fluorophenyl)phosphonium (F4-TPP+), using solid-state NMR spectroscopy and an S64V-EmrE mutant. The substrate-bound protein exhibits distinct structures at acidic and basic pH, reflecting changes upon binding or release of a proton from residue E14, respectively. To obtain insight into the protein dynamics that mediate substrate transport, here we measure 15N rotating-frame spin-lattice relaxation (R1ρ) rates of F4-TPP+-bound S64V-EmrE in lipid bilayers under magic-angle spinning (MAS). Using perdeuterated and back-exchanged protein and 1H-detected 15N spin-lock experiments under 55 kHz MAS, we measured 15N R1ρ rates site-specifically. Many residues show spin-lock field-dependent 15N R1ρ relaxation rates. This relaxation dispersion indicates the presence of backbone motions at a rate of about 6000 s-1 at 280 K for the protein at both acidic and basic pH. This motional rate is 3 orders of magnitude faster than the alternating access rate but is within the range estimated for substrate binding. We propose that these microsecond motions may allow EmrE to sample different conformations to facilitate substrate binding and release from the transport pore.

Activating alternative transport modes in a multidrug resistance efflux pump to confer chemical susceptibility

Small multidrug resistance (SMR) transporters contribute to antibiotic resistance through proton-coupled efflux of toxic compounds. Previous biophysical studies of the E. coli SMR transporter EmrE suggest that it should also be able to perform proton/toxin symport or uniport, leading to toxin susceptibility rather than resistance in vivo. Here we show EmrE does confer susceptibility to several previously uncharacterized small-molecule substrates in E. coli, including harmane. In vitro electrophysiology assays demonstrate that harmane binding triggers uncoupled proton flux through EmrE. Assays in E. coli are consistent with EmrE-mediated dissipation of the transmembrane pH gradient as the mechanism underlying the in vivo phenotype of harmane susceptibility. Furthermore, checkerboard assays show this alternative EmrE transport mode can synergize with some existing antibiotics, such as kanamycin. These results demonstrate that it is possible to not just inhibit multidrug efflux, but to activate alternative transport modes detrimental to bacteria, suggesting a strategy to address antibiotic resistance.

Still rocking in the structural era: A molecular overview of the small multidrug resistance (SMR) transporter family

The small multidrug resistance (SMR) family is composed of widespread microbial membrane proteins that fulfill different transport functions. Four functional SMR subtypes have been identified, which variously transport the small, charged metabolite guanidinium, bulky hydrophobic drugs and antiseptics, polyamines, and glycolipids across the membrane bilayer. The transporters possess a minimalist architecture, with ∼100-residue subunits that require assembly into homodimers or heterodimers for transport. In part because of their simple construction, the SMRs are a tractable system for biochemical and biophysical analysis. Studies of SMR transporters over the last 25 years have yielded deep insights for diverse fields, including membrane protein topology and evolution, mechanisms of membrane transport, and bacterial multidrug resistance. Here, we review recent advances in understanding the structures and functions of SMR transporters. New molecular structures of SMRs representing two of the four functional subtypes reveal the conserved structural features that have permitted the emergence of disparate substrate transport functions in the SMR family and illuminate structural similarities with a distantly related membrane transporter family, SLC35/DMT.

Transmembrane peptide effects on bacterial membrane integrity and organization

As the bacterial multidrug resistance crisis continues, membrane-active antimicrobial peptides are being explored as an alternate treatment to conventional antibiotics. In contrast to antimicrobial peptides, which function by a nonspecific membrane disruption mechanism, here we describe a series of transmembrane (TM) peptides that are designed to act as drug efflux inhibitors by aligning with and out-competing a conserved TM4-TM4 homodimerization motif within bacterial small multidrug resistance proteins. The peptides contain two terminal tags: a C-terminal lysine tag to direct the peptides toward the negatively charged bacterial membrane, and an uncharged N-terminal sarcosine (N-methyl-glycine) tag to promote membrane insertion. While effective at inhibiting efflux activity, ostensibly through their designed mechanism of action, the impact of the peptides on the bacterial inner membrane remains undetermined. To evaluate the extant peptide-membrane interactions, we performed a series of biophysical measurements. Circular dichroism spectroscopy and Trp fluorescence showed that the peptides insert into the membrane generally in helical form. Interestingly, differential scanning calorimetry of the peptides added to bacterial-like membranes (POPE:POPG 3:1) revealed the peptides' ability to demix the POPE and POPG lipids, creating two pools, one of which is likely a peptide-POPG conglomerate, and the other a POPE-rich component where the native POPG content has been depleted. However, dye leakage assays confirmed that these events occur without causing significant membrane disruption both in vitro and in vivo, indicating that the peptides can target the small multidrug resistance TM4-TM4 motif without nonspecific membrane disruption. In related studies, DiOC2(3) fluorescence indicated moderate peptide-mediated reduction of the proton motive force for all peptides, including control peptides that did not display inhibitory activity. The overall findings suggest that peptides designed with suitable tags, sequence hydrophobicity, and charge distribution can be directed more generally to impact proteins whose function involves membrane-embedded protein-protein interactions.

Detergent-Free Isolation of Membrane Proteins and Strategies to Study Them in a Near-Native Membrane Environment

Atomic-resolution structural studies of membrane-associated proteins and peptides in a membrane environment are important to fully understand their biological function and the roles played by them in the pathology of many diseases. However, the complexity of the cell membrane has severely limited the application of commonly used biophysical and biochemical techniques. Recent advancements in NMR spectroscopy and cryoEM approaches and the development of novel membrane mimetics have overcome some of the major challenges in this area. For example, the development of a variety of lipid-nanodiscs has enabled stable reconstitution and structural and functional studies of membrane proteins. In particular, the ability of synthetic amphipathic polymers to isolate membrane proteins directly from the cell membrane, along with the associated membrane components such as lipids, without the use of a detergent, has opened new avenues to study the structure and function of membrane proteins using a variety of biophysical and biological approaches. This review article is focused on covering the various polymers and approaches developed and their applications for the functional reconstitution and structural investigation of membrane proteins. The unique advantages and limitations of the use of synthetic polymers are also discussed.

Kinetic model for reversible radical transfer in ribonucleotide reductase

The enzyme ribonucleotide reductase (RNR), which catalyzes the reduction of ribonucleotides to deoxynucleotides, is vital for DNA synthesis, replication, and repair in all living organisms. Its mechanism requires long-range radical translocation over ∼32 Å through two protein subunits and the intervening aqueous interface. Herein, a kinetic model is designed to describe reversible radical transfer in Escherichia coli RNR. This model is based on experimentally studied photoRNR systems that allow the photochemical injection of a radical at a specific tyrosine residue, Y356, using a photosensitizer. The radical then transfers across the interface to another tyrosine residue, Y731, and continues until it reaches a cysteine residue, C439, which is primed for catalysis. This kinetic model includes radical injection, an off-pathway sink, radical transfer between pairs of residues along the pathway, and the conformational flipping motion of Y731 at the interface. Most of the input rate constants for this kinetic model are obtained from previous experimental measurements and quantum mechanical/molecular mechanical free-energy simulations. Ranges for the rate constants corresponding to radical transfer across the interface are determined by fitting to the experimentally measured Y356 radical decay times in photoRNR systems. This kinetic model illuminates the time evolution of radical transport along the tyrosine and cysteine residues following radical injection. Further analysis identifies the individual rate constants that may be tuned to alter the timescale and probability of the injected radical reaching C439. The insights gained from this kinetic model are relevant to biochemical understanding and protein-engineering efforts with potential pharmacological implications.

General principles of secondary active transporter function

Transport of ions and small molecules across the cell membrane against electrochemical gradients is catalyzed by integral membrane proteins that use a source of free energy to drive the energetically uphill flux of the transported substrate. Secondary active transporters couple the spontaneous influx of a "driving" ion such as Na+ or H+ to the flux of the substrate. The thermodynamics of such cyclical non-equilibrium systems are well understood, and recent work has focused on the molecular mechanism of secondary active transport. The fact that these transporters change their conformation between an inward-facing and outward-facing conformation in a cyclical fashion, called the alternating access model, is broadly recognized as the molecular framework in which to describe transporter function. However, only with the advent of high resolution crystal structures and detailed computer simulations, it has become possible to recognize common molecular-level principles between disparate transporter families. Inverted repeat symmetry in secondary active transporters has shed light onto how protein structures can encode a bi-stable two-state system. Based on structural data, three broad classes of alternating access transitions have been described as rocker-switch, rocking-bundle, and elevator mechanisms. More detailed analysis indicates that transporters can be understood as gated pores with at least two coupled gates. These gates are not just a convenient cartoon element to illustrate a putative mechanism but map to distinct parts of the transporter protein. Enumerating all distinct gate states naturally includes occluded states in the alternating access picture and also suggests what kind of protein conformations might be observable. By connecting the possible conformational states and ion/substrate bound states in a kinetic model, a unified picture emerges in which the symporter, antiporter, and uniporter functions are extremes in a continuum of functionality. As usual with biological systems, few principles and rules are absolute and exceptions are discussed as well as how biological complexity may be integrated in quantitative kinetic models that may provide a bridge from the structure to function.

High-pH structure of EmrE reveals the mechanism of proton-coupled substrate transport

The homo-dimeric bacterial membrane protein EmrE effluxes polyaromatic cationic substrates in a proton-coupled manner to cause multidrug resistance. We recently determined the structure of substrate-bound EmrE in phospholipid bilayers by measuring hundreds of protein-ligand H^N–F distances for a fluorinated substrate, 4-fluoro-tetraphenylphosphonium (F₄-TPP⁺), using solid-state NMR. This structure was solved at low pH where one of the two proton-binding Glu14 residues is protonated. Here, to understand how substrate transport depends on pH, we determine the structure of the EmrE-TPP complex at high pH, where both Glu14 residues are deprotonated. The high-pH complex exhibits an elongated and hydrated binding pocket in which the substrate is similarly exposed to the two sides of the membrane. In contrast, the low-pH complex asymmetrically exposes the substrate to one side of the membrane. These pH-dependent EmrE conformations provide detailed insights into the alternating-access model, and suggest that the high-pH conformation may facilitate proton binding in the presence of the substrate, thus accelerating the conformational change of EmrE to export the substrate.

EmrE transporter effluxes cationic substrates across lipid membranes in a pH-coupled manner. Here, the authors solve the structure of ligand-bound EmrE at high pH by NMR, with insights into the transport mechanism.

Multiscale kinetic analysis of proteins

The stochasticity of molecular motion results in the existence of multiple kinetically relevant pathways in many biomolecular mechanisms. Because it is highly demanding to characterize them for complex systems, mechanisms are often described with a single-pathway perspective. However, kinetic network analysis and sub-ensemble experimental insight are increasingly demonstrating not only the existence of competing pathways but also the importance of kinetic selection in biology. This review focuses on advances in multiscale kinetic analysis of proteins, which connects molecular level information from simulations to macroscopic data to characterize mechanistic reaction networks and the reactive flux through them. We describe a range of methods used and highlight several examples where kinetic modeling has revealed functional importance of pathway heterogeneity.

A solid-supported membrane electrophysiology assay for efficient characterization of ion-coupled transport

Transport stoichiometry determination can provide great insight into the mechanism and function of ion-coupled transporters. Traditional reversal potential assays are a reliable, general method for determining the transport stoichiometry of ion-coupled transporters, but the time and material costs of this technique hinder investigations of transporter behavior under multiple experimental conditions. Solid-supported membrane electrophysiology (SSME) allows multiple recordings of liposomal or membrane samples adsorbed onto a sensor and is sensitive enough to detect transport currents from moderate-flux transporters that are inaccessible to traditional electrophysiology techniques. Here, we use SSME to develop a new method for measuring transport stoichiometry with greatly improved throughput. Using this technique, we were able to verify the recent report of a fixed 2:1 stoichiometry for the proton:guanidinium antiporter Gdx, reproduce the 1H+:2Cl- antiport stoichiometry of CLC-ec1, and confirm loose proton:nitrate coupling for CLC-ec1. Furthermore, we were able to demonstrate quantitative exchange of internal contents of liposomes adsorbed onto SSME sensors to allow multiple experimental conditions to be tested on a single sample. Our SSME method provides a fast, easy, general method for measuring transport stoichiometry, which will facilitate future mechanistic and functional studies of ion-coupled transporters.

Toward a Multipathway Perspective: pH-Dependent Kinetic Selection of Competing Pathways and the Role of the Internal Glutamate in Cl-/H+ Antiporters

Canonical descriptions of multistep biomolecular transformations generally follow a single-pathway viewpoint, with a series of transitions through intermediates converting reactants to products or repeating a conformational cycle. However, mounting evidence suggests that more complexity and pathway heterogeneity are mechanistically relevant due to the statistical distribution of multiple interconnected rate processes. Making sense of such pathway complexity remains a significant challenge. To better understand the role and relevance of pathway heterogeneity, we herein probe the chemical reaction network of a Cl-/H+ antiporter, ClC-ec1, and analyze reaction pathways using multiscale kinetic modeling (MKM). This approach allows us to describe the nature of the competing pathways and how they change as a function of pH. We reveal that although pH-dependent Cl-/H+ transport rates are largely regulated by the charge state of amino acid E148, the charge state of E203 determines relative contributions from coexisting pathways and can shift the flux pH-dependence. The selection of pathways via E203 explains how ionizable mutations (D/H/K/R) would impact the ClC-ec1 bioactivity from a kinetic perspective and lends further support to the indispensability of an internal glutamate in ClC antiporters. Our results demonstrate how quantifying the kinetic selection of competing pathways under varying conditions leads to a deeper understanding of the Cl-/H+ exchange mechanism and can suggest new approaches for mechanistic control.

Structural Insights into Transporter-Mediated Drug Resistance in Infectious Diseases

Infectious diseases present a major threat to public health globally. Pathogens can acquire resistance to anti-infectious agents via several means including transporter-mediated efflux. Typically, multidrug transporters feature spacious, dynamic, and chemically malleable binding sites to aid in the recognition and transport of chemically diverse substrates across cell membranes. Here, we discuss recent structural investigations of multidrug transporters involved in resistance to infectious diseases that belong to the ATP-binding cassette (ABC) superfamily, the major facilitator superfamily (MFS), the drug/metabolite transporter (DMT) superfamily, the multidrug and toxic compound extrusion (MATE) family, the small multidrug resistance (SMR) family, and the resistance-nodulation-division (RND) superfamily. These structural insights provide invaluable information for understanding and combatting multidrug resistance.

A Burkholderia thailandensis DedA Family Membrane Protein Is Required for Proton Motive Force Dependent Lipid A Modification

The DedA family is a conserved membrane protein family found in most organisms. A Burkholderia thailandensis DedA family protein, named DbcA, is required for high-level colistin (polymyxin E) resistance, but the mechanism awaits elucidation. Modification of lipopolysaccharide lipid A with the cationic sugar aminoarabinose (Ara4N) is required for colistin resistance and is dependent upon protonmotive force (PMF) dependent transporters. B. thailandensis ΔdbcA lipid A contains only small amounts of Ara4N, likely leading to colistin sensitivity. Two B. thailandensis operons are required for lipid A modification with Ara4N, one needed for biosynthesis of undecaprenyl-P-Ara4N and one for transport of the lipid linked sugar and subsequent lipid A modification. Here, we directed overexpression of each arn operon by genomic insertion of inducible promoters. We found that overexpression of arn operons in ΔdbcA can partially, but not completely, restore Ara4N modification of lipid A and colistin resistance. Artificially increasing the PMF by lowering the pH of the growth media also increased membrane potential, amounts of Ara4N, and colistin resistance of ΔdbcA. In addition, the products of arn operons are essential for acid tolerance, suggesting a physiological function of Ara4N modification. Finally, we show that ΔdbcA is sensitive to bacitracin and expression of a B. thailandensis UppP/BacA homolog (BTH_I1512) can partially restore resistance to bacitracin. Expression of a different UppP/BacA homolog (BTH_I2750) can partially restore colistin resistance, without changing the lipid A profile. This work suggests that maintaining optimal membrane potential at slightly alkaline pH media by DbcA is responsible for proper modification of lipid A by Ara4N and provides evidence of lipid A modification-dependent and -independent mechanisms of colistin resistance in B. thailandensis.

Structure and dynamics of the drug-bound bacterial transporter EmrE in lipid bilayers

The dimeric transporter, EmrE, effluxes polyaromatic cationic drugs in a proton-coupled manner to confer multidrug resistance in bacteria. Although the protein is known to adopt an antiparallel asymmetric topology, its high-resolution drug-bound structure is so far unknown, limiting our understanding of the molecular basis of promiscuous transport. Here we report an experimental structure of drug-bound EmrE in phospholipid bilayers, determined using ¹⁹F and ¹H solid-state NMR and a fluorinated substrate, tetra(4-fluorophenyl) phosphonium (F₄-TPP⁺). The drug-binding site, constrained by 214 protein-substrate distances, is dominated by aromatic residues such as W63 and Y60, but is sufficiently spacious for the tetrahedral drug to reorient at physiological temperature. F₄-TPP⁺ lies closer to the proton-binding residue E14 in subunit A than in subunit B, explaining the asymmetric protonation of the protein. The structure gives insight into the molecular mechanism of multidrug recognition by EmrE and establishes the basis for future design of substrate inhibitors to combat antibiotic resistance.

Structure, function and regulation of mammalian glucose transporters of the SLC2 family

The SLC2 genes code for a family of GLUT proteins that are part of the major facilitator superfamily (MFS) of membrane transporters. Crystal structures have recently revealed how the unique protein fold of these proteins enables the catalysis of transport. The proteins have 12 transmembrane spans built from a replicated trimer substructure. This enables 4 trimer substructures to move relative to each other, and thereby alternately opening and closing a cleft to either the internal or the external side of the membrane. The physiological substrate for the GLUTs is usually a hexose but substrates for GLUTs can include urate, dehydro-ascorbate and myo-inositol. The GLUT proteins have varied physiological functions that are related to their principal substrates, the cell type in which the GLUTs are expressed and the extent to which the proteins are associated with subcellular compartments. Some of the GLUT proteins translocate between subcellular compartments and this facilitates the control of their function over long- and short-time scales. The control of GLUT function is necessary for a regulated supply of metabolites (mainly glucose) to tissues. Pathophysiological abnormalities in GLUT proteins are responsible for, or associated with, clinical problems including type 2 diabetes and cancer and a range of tissue disorders, related to tissue-specific GLUT protein profiles. The availability of GLUT crystal structures has facilitated the search for inhibitors and substrates and that are specific for each GLUT and that can be used therapeutically. Recent studies are starting to unravel the drug targetable properties of each of the GLUT proteins.

A kinetic mechanism for enhanced selectivity of membrane transport

Membrane transport is generally thought to occur via an alternating access mechanism in which the transporter adopts at least two states, accessible from two different sides of the membrane to exchange substrates from the extracellular environment and the cytoplasm or from the cytoplasm and the intracellular matrix of the organelles (only in eukaryotes). In recent years, a number of high resolution structures have supported this general framework for a wide class of transport molecules, although additional states along the transport pathway are emerging as critically important. Given that substrate binding is often weak in order to enhance overall transport rates, there exists the distinct possibility that transporters may transport the incorrect substrate. This is certainly the case for many pharmaceutical compounds that are absorbed in the gut or cross the blood brain barrier through endogenous transporters. Docking studies on the bacterial sugar transporter vSGLT reveal that many highly toxic compounds are compatible with binding to the orthosteric site, further motivating the selective pressure for additional modes of selectivity. Motivated by recent work in which we observed failed substrate delivery in a molecular dynamics simulation where the energized ion still goes down its concentration gradient, we hypothesize that some transporters evolved to harness this 'slip' mechanism to increase substrate selectivity and reduce the uptake of toxic molecules. Here, we test this idea by constructing and exploring a kinetic transport model that includes a slip pathway. While slip reduces the overall productive flux, when coupled with a second toxic molecule that is more prone to slippage, the overall substrate selectivity dramatically increases, suppressing the accumulation of the incorrect compound. We show that the mathematical framework for increased substrate selectivity in our model is analogous to the classic proofreading mechanism originally proposed for tRNA synthase; however, because the transport cycle is reversible we identified conditions in which the selectivity is essentially infinite and incorrect substrates are exported from the cell in a 'detoxification' mode. The cellular consequences of proofreading and membrane slippage are discussed as well as the impact on future drug development.