Effective growth of boron nitride nanotubes by thermal chemical vapor deposition

Development of superhydrophobic and superoleophilic CNT and BNNT coated copper meshes for oil/water separation

In this research, chemical vapor deposition (CVD) method was used to synthesize boron nitride nanotube (BNNT) powder. This method involves heating multi-walled carbon nanotube (MWCNT) and boric acid in the presence of ammonia gas up to 1000 °C. Then MWCNT and synthetic BNNT were coated on the copper mesh via dip-coating method separately to prepare nano-structured membranes for efficient oil/water separation. Various analyzes were performed to identify the synthetic BNNT properties (X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS) and prepared coated membranes (FESEM, atomic force microscopy (AFM), water contact angle (WCA), oil contact angle (OCA) and oil/water separation process). Water and oil contact angle analyzes showed the super-oleophilic properties of both membranes with the underwater OCA of about 128°. For the separation process, a dead-end filtration setup was used, and free oil water mixture and o/w emulsion were prepared. So, in the separation process water was retained and decalin passed through both prepared membranes. The flux of CNT coated membrane was about 458 L m2 h-1, while this amount was 1834 L m2 h-1 for BNNT coated membrane and 99% separation efficiency was achieved by both of them. This four-fold increase in flux is due to the fact that the inner diameter of boron nitride nanotubes synthesized is four times larger than the inner diameter of MWCNT.

Evaluating the Efficiency of Boron Nitride Coating in Single-Walled Carbon-Nanotube-Based 1D Heterostructure Films by Optical Spectroscopy

Single-walled carbon nanotube (SWCNT) films exhibit exceptional optical and electrical properties, making them highly promising for scalable integrated devices. Previously, we employed SWCNT films as templates for the chemical vapor deposition (CVD) synthesis of one-dimensional heterostructure films where boron nitride nanotubes (BNNTs) and molybdenum disulfide nanotubes (MoS2NTs) were coaxially nested over the SWCNT networks. In this work, we have further refined the synthesis method to achieve precise control over the BNNT coating in SWCNT@BNNT heterostructure films. The resulting structure of the SWCNT@BNNT films was thoroughly characterized using a combination of electron microscopy, UV-vis-NIR spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, and Raman spectroscopy. Specifically, we investigated the pressure effect induced by BNNT wrapping on the SWCNTs in the SWCNT@BNNT heterostructure film and demonstrated that the shifts of the SWCNT's G and 2D (G') modes in Raman spectra can be used as a probe of the efficiency of BNNT coating. In addition, we studied the impact of vacuum annealing on the removal of the initial doping in SWCNTs, arising from exposure to ambient atmosphere, and examined the effect of MoO3 doping in SWCNT films by using UV-vis-NIR spectroscopy and Raman spectroscopy. We show that through correlation analysis of the G and 2D (G') modes in Raman spectra, it is possible to discern distinct types of doping effects as well as the influence of applied pressure on the SWCNTs within SWCNT@BNNT heterostructure films. This work contributes to a deeper understanding of the strain and doping effect in both SWCNTs and SWCNT@BNNTs, thereby providing valuable insights for future applications of carbon-nanotube-based one-dimensional heterostructures.

The structural stability, electronic properties regulation and feasibility of controllable preparation of a C0.5/(BN)0.5 heterojunction single-walled nanotube

Our work investigates the structural stability of a C 0.5 / ( BN ) 0.5 heterojunction single-walled nanotube by comparing the binding energy. The energy band structure, electronic density of states and regulation relation between band gap and indirect-direct properties and tube diameter and type are systematically studied. Based on existing experimental and theoretical results, dynamic simulated calculating of the stitching process is carried out to explore the feasibility of controllable preparation.

Scalable, Highly Pure, and Diameter-Sorted Boron Nitride Nanotube by Aqueous Polymer Two-Phase Extraction

Boron nitride nanotube (BNNT) has attracted recent attention owing to its exceptional material properties; yet, practical implementation in real-life applications has been elusive, mainly due to the purity issues associated with its large-scale synthesis. Although different purification methods have been discussed so far, there lacks a scalable solution method in the community. In this work, a simple, high-throughput, and scalable purification of BNNT is reported via modification of an established sorting technique, aqueous polymer two-phase extraction. A complete partition mapping of the boron nitride species is established, which enables the segregation of the highly pure BNNT with a major impurity removal efficiency of > 98%. A successful scaling up of the process is illustrated and provides solid evidence of its diameter sorting behavior. Last, towards its macroscopic assemblies, a liquid crystal of the purified BNNT is demonstrated. The effort toward large-scale solution purification of BNNT is believed to contribute significantly to the macroscopic realization of its exceptional properties in the near future.

Nanosized Hexagonal Boron Nitride and Polyethylene Glycol-Filled Leathers for Applications Demanding High Thermal Insulation and Impact Resistance

Leather is a niche material used for upholsteries, gloves, and garments due to its high durability, flexibility, and softness properties. The inclusion of nanoparticles in the leather matrix provides multifunctionality for high-performance applications. Herein, we synthesized hexagonal boron nitride (h-BN) nanoparticles via a single-step hydrothermal synthesis and treated the leather after dispersing in polyethylene glycol (PEG) to yield h-BN/PEG-treated leathers. Atomic force microscopy and high-resolution transmission electron microscopy analysis ascertained the particle size of 30-50 nm for as-synthesized h-BN nanoparticles. h-BN nanoparticles along with PEG were successfully incorporated into the leather matrix, and this was confirmed by surface and morphological studies using field emission scanning electron microscopy/energy-dispersive X-ray analysis and Fourier transformed infrared spectroscopy. Leathers treated with h-BN/PEG were studied for insulation against heat and cold, and the results displayed improved thermal insulation properties compared to the control leathers. The dynamic mechanical analysis of control and treated leathers demonstrated higher storage modulus, loss modulus, and tan δ values for h-BN/PEG-treated leathers, signifying an increased energy absorption and dissipation potential, which was further ascertained by the low-velocity drop-weight impact resistance test. Thus, the results of this study open up new prospects for h-BN/PEG-treated leathers in strategic applications demanding high thermal insulation and impact resistance properties.

Modeling of BN-Doped Carbon Nanotube as High-Performance Thermoelectric Materials

Ternary BNC nanotubes were modeled and characterized through a periodic density functional theory approach with the aim of investigating the influence on the structural, electronic, mechanical, and transport properties of the quantity and pattern of doping. The main energy band gap is easily tunable as a function of the BN percentage, the mechanical stability is generally preserved, and an interesting piezoelectric character emerges in the BNC structures. Moreover, C@(BN)_1-xC_x double-wall presents promising values of the thermoelectric coefficients due to the combined lowering of the thermal conductivity and increase of charge carriers. Computed results are in qualitative agreement with the little experimental evidence and therefore can provide insights on an atomic scale of the real samples and direct the synthesis towards increasingly performing hybrid nanomaterials.

Enhanced Thermal Stability and Synergistic Effects of Magnesium and Iron Borate Composites against Pathogenic Bacteria

A simple process based on the dual roles of both magnesium oxide (MgO) and iron oxide (FeO) with boron (B) as precursors and catalysts has been developed for the synthesis of borate composites of magnesium and iron (Mg2B2O5-Fe3BO6) at 1200°C. The as-synthesized composites can be a single material with the improved and collective properties of both iron borates (Fe3BO6) and magnesium borates (Mg2B2O5). At higher temperatures, the synthesized Mg2B2O5-Fe3BO6 composite is found thermally more stable than the single borates of both magnesium and iron. Similarly, the synthesized composites are found to prevent the growth of both gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) pathogenic bacteria on all the tested concentrations. Moreover, the inhibitory effect of the synthesized composite increases with an increase in concentration and is more pronounced against S. aureus as compared to E. coli.

In Vitro and In Vivo Cytotoxicity of Boron Nitride Nanotubes: A Systematic Review

Boron nitride nanotubes (BNNTs) are an exciting class of nanomaterials due to their unique chemical and physical characteristics. In recent decades, BNNTs have gained huge attention in research and development for various applications, including as nano-fillers for composites, semiconductor devices, hydrogen storage, and as an emerging material in biomedical and tissue engineering applications. However, the toxicity of BNNTs is not clear, and the biocompatibility is not proven yet. In this review, the role of BNNTs in biocompatibility studies is assessed in terms of their characteristics: cell viability, proliferation, therapeutic outcomes, and genotoxicity, which are vital elements for their prospective use in biomedical applications. A systematic review was conducted utilising the databases Scopus and Web of Science (WOS) (2008-2022). Additional findings were discovered manually by snowballing the reference lists of appropriate reviews. Only English-language articles were included. Finally, the significant analysis and discussion of the chosen articles are presented.

Emerging Applications of Boron Nitride Nanotubes in Energy Harvesting, Electronics, and Biomedicine

Boron nitride nanotubes (BNNTs) are structurally and mechanically similar to carbon nanotubes (CNTs). In contrast, BNNTs exhibit unique properties for being electrically insulating and optically transparent due to the polarized boron nitride bonds. All these properties have prevented the use of BNNTs for energy harvesting and electronic devices for more than 25 years. During the past few years, researchers have started to demonstrate a series of novel applications of BNNTs based on unique properties not found on CNTs. For example, these novel applications include osmotic power harvesting using the charged inner surfaces of BNNTs, room-temperature single-electron transistors using insulating BNNTs as the tunneling channels, high-brightness fluorophores that can be 1000-times brighter than regular dyes, and transistors based on Tellurium atomic chains filled inside BNNTs. We have reviewed some of these emerging applications and provided our perspective for future work.

Boron nitride nanosheets elicit significant hemolytic activity via destruction of red blood cell membranes

Boron nitride (BN) nanosheets have emerged as promising nanomaterials in a wide range of biomedical applications. Despite extensive studies on these bio-nano interfacial systems, the underlying molecular mechanisms remain elusive. In this study, we used hemolysis assays and morphology observations to demonstrate for the first time that BN nanosheets can cause damages to the red-blood-cell membranes, leading to significant hemolysis. Further molecular dynamics simulations revealed that BN nanosheets can penetrate into the cell membrane and also extract considerable amount of phospholipid molecules directly from the lipid bilayer. The potential of mean force calculations then showed that their penetration effect was thermodynamically favorable due to the strong attractive van der Waals interactions between BN nanosheets and phospholipids. Overall, these findings provided valuable insights into the interaction of BN nanosheets with cell membranes at the atomic level, which can help future de novo design of BN-based nanodevices with better biocompatibility.

Highly Aligned Array of Heterostructured Polyflourene-Isolated Boron Nitride and Carbon Nanotubes

Boron nitride nanotubes (BNNTs) have attracted increasing attention for their exceptional thermal, electronic, and optical properties. However, the progress in BNNTs applications has largely been limited by the low purity of as-synthesized BNNTs and inefficient solution-processing protocols due mainly to the instability of BNNTs in most of the solvents. Therefore, fabrication of highly pure, stable, and fully individualized BNNTs in a rational manner is required. Here, we report a significant improvement in the preparation of well-dispersed BNNTs, utilizing conjugated polymers that interact with BNNTs, allowing selective sorting and individualization of the nanotubes. Evidence of strong interactions between the polymers and BNNTs was observed by optical absorption and photoluminescence spectroscopies, while effective individualization was observed by electron microscopy. The sorted BNNTs were successfully used in a solution-processing protocol called dose-controlled, floating evaporative self-assembly (DFES) previously established for single-walled carbon nanotubes (SWCNT) array fabrication. A device fabricated via DFES from the sorted BNNTs mixed with polymer-wrapped, semiconducting single-walled carbon nanotubes (s-SWCNTs) exhibited an on-state conductance of 253 ± 6 μS μm^-1 and an on/off ratio of 10^6.6±0.4 for a gate voltage of -0.1 V. This breakthrough in BNNT dispersion and isolation is a significant advancement toward the exploitation of BNNTs in future applications.

The MgB2-catalyzed growth of boron nitride nanotubes using B/MgO as a boron containing precursor

With the development of preparation technology, obtaining boron nitride nanotubes (BNNTs) is no longer difficult, but it is still not easy to balance the quality and purity of the obtained products using existing methods. In this work, we investigated a previously reported MgB2 catalyst to explore the synthesis of BNNTs at a higher temperature in a conventional chemical vapor deposition (CVD) system from a classic B/MgO precursor. Various characterization methods showed the high activity of MgB2 at 1400 °C and the superiority of the as-grown BNNTs in terms of purity and quality. Further reference experiments and element characterization measurements were also performed to verify the role of MgB2 in the growth of the BNNTs, finding that B/MgO/MgB2 is a simple and efficient precursor.

Ultrafast Optoelectronic Processes in 1D Radial van der Waals Heterostructures: Carbon, Boron Nitride, and MoS2 Nanotubes with Coexisting Excitons and Highly Mobile Charges

Heterostructures built from 2D, atomically thin crystals are bound by the van der Waals force and exhibit unique optoelectronic properties. Here, we report the structure, composition and optoelectronic properties of 1D van der Waals heterostructures comprising carbon nanotubes wrapped by atomically thin nanotubes of boron nitride and molybdenum disulfide (MoS₂). The high quality of the composite was directly made evident on the atomic scale by transmission electron microscopy, and on the macroscopic scale by a study of the heterostructure's equilibrium and ultrafast optoelectronics. Ultrafast pump-probe spectroscopy across the visible and terahertz frequency ranges identified that, in the MoS₂ nanotubes, excitons coexisted with a prominent population of free charges. The electron mobility was comparable to that found in high-quality atomically thin crystals. The high mobility of the MoS₂ nanotubes highlights the potential of 1D van der Waals heterostructures for nanoscale optoelectronic devices.

High-Temperature Polaritons in Ceramic Nanotube Antennas

High-temperature thermal photonics presents unique challenges for engineers as the database of materials that can withstand extreme environments are limited. In particular, ceramics with high temperature stability that can support coupled light-matter excitations, that is, polaritons, open new avenues for engineering radiative heat transfer. Hexagonal boron nitride (hBN) is an emerging ceramic 2D material that possesses low-loss polaritons in two spectrally distinct mid-infrared frequency bands. The hyperbolic nature of these frequency bands leads to a large local density of states (LDOS). In 2D form, these polaritonic states are dark modes, bound to the material. In cylindrical form, boron nitride nanotubes (BNNTs) create subwavelength particles capable of coupling these dark modes to radiative ones. In this study, we leverage the high-frequency optical phonons present in BNNTs to create strong mid-IR thermal antenna emitters at high temperatures (938 K). Through direct measurement of thermal emission of a disordered system of BNNTs, we confirm their radiative polaritonic modes and show that the antenna behavior can be observed even in a disordered system. These are among the highest-frequency optical phonon polaritons that exist and could be used as high-temperature mid-IR thermal nanoantenna sources.

Surface and Volume Phonon Polaritons in Boron Nitride Nanotubes

Phonon polaritons (PhPs) are quasiparticles created by coupling of photons to polar lattice vibrations. Previously, PhPs have been observed as both surface and volume confined waves. The dispersion of the polariton depends strongly on the nature of the material. Volume polaritons show asymptotic behavior near the longitudinal optical phonon frequency of the material, whereas surface polaritons instead approach the surface phonon frequency. Boron nitride nanotubes (BNNTs) were found to exhibit the dispersion of volume modes below the surface phonon frequency. However, around and above the surface phonon frequency, the behavior becomes that of a surface wave with an amplified near-field response. These findings improve our understanding of photonics within BNNTs and suggest potential applications that take advantage of the high fields and density of states in that spectral region.

Magnesium-induced preparation of boron nitride nanotubes and their application in thermal interface materials

The effective growth of boron nitride nanotubes (BNNTs) by boron oxide chemical vapor deposition (BOCVD) is extremely challenging, especially in a horizontal tube furnace. Herein, we propose a novel Mg-induction strategy, which is low cost and efficiently generates BNNTs by separating Mg from diverse boron sources (B2O3, H3BO3, borates, and so on). After careful analysis and discussion of the prepared BNNTs, the corresponding in situ generation of MgB2, an effective catalyst for the growth of BNNTs, was proposed and verified. This contribution will provide a low-cost, highly efficient and large-scale method for the preparation of BNNTs with the CVD method. The prepared BNNTs can be widely used in thermal interface materials, as demonstrated by the high thermal conductivity of the poly-vinyl alcohol (PVA) composite filled with these BNNTs. Therefore, our work offers a new strategy that is low cost and highly efficient for large-scale fabrication of BNNTs, and demonstrates that the prepared BNNTs have great potential applications in thermal interface materials.

Quantification of hexagonal boron nitride impurities in boron nitride nanotubes via FTIR spectroscopy

Preparation of high-quality boron nitride nanotubes (BNNTs) from commercially available stock is critical for eventual industry adoption and to perform comprehensive experimental studies of BNNTs. Separation of hexagonal boron nitride (h-BN) and BNNTs is a significant challenge, and equally so, quantification of h-BN content in mixed samples is a major challenge due to their nearly identical properties. This work introduces a simple method of quantifying h-BN content in BNNTs based on FTIR analysis. Quantification is achieved by "spiking" a BNNT sample with pure nanoscale h-BN as an internal standard. To demonstrate the efficacy of the quantification technique two BNNT enrichment methods, surfactant wrapping and centrifugation, and a novel sonication-assisted isovolumetric filtration are introduced. FTIR spectra of enriched samples show clear trends throughout the processes. We propose and demonstrate that FTIR peak ratios of the transverse and buckling modes of mixed h-BN/BNNT samples can be used to calibrate and quantify h-BN content in any BNNT sample. Hopefully, this method enables as-received BNNTs to be quantifiably enriched from low purity commercial feedstocks, enabling future development and study of BNNTs and related technology.

Two-Dimensional Gold Quantum Dots with Tunable Bandgaps

Metallic gold nanoparticles (Au NPs) with multilayer Au atoms are useful for plasmonic, chemical, medical, and metamaterial application. In this article, we report the opening of the bandgap in substrate-supported two-dimensional (2D) gold quantum dots (Au QDs) with monolayer Au atoms. Calculations based on density functional theory suggest that 2D Au QDs are energetically favorable over 3D Au clusters when coated on hexagonal boron nitride (BN) surfaces. Experimentally, we find that BN nanotubes (BNNTs) can be used to stabilize 2D Au QDs on their cylindrical surfaces as well as Au atoms, dimers, and trimers. The electrically insulating and optically transparent BNNTs enable the detection of the optical bandgaps of the Au QDs in the visible spectrum. We further demonstrate that the size and shapes of 2D Au QDs could be atomically trimmed and restructured by electron beam irradiation. Our results may stimulate further exploration of energetically stable, metal-based 2D semiconductors, with properties tunable atom by atom.

Anticarcinogenic activity of blue fluorescent hexagonal boron nitride quantum dots: as an effective enhancer for DNA cleavage activity of anticancer drug doxorubicin

Blue fluorescent hexagonal boron nitride quantum dots (h-BNQDs) of ∼10 nm size as an effective enhancer for DNA cleavage activity of anticancer drug doxorubicin (DOX) were synthesized using simple one-step hydrothermal disintegration of exfoliated hexagonal boron nitride at very low temperature ∼ 120 °C. Boron nitride quantum dots (BNQDs) at a concentration of 25 μg/ml enhanced DNA cleavage activity of DOX up to 70% as checked by converting supercoiled fragment into nicked circular PBR322 DNA. The interaction of BNQDs with DOX is proportional to the concentration of BNQDs, with binding constant K b ∼0.07338 μg/ml. In addition, ab initio theoretical results indicate that DOX is absorbed on BNQDs at the N-terminated edge with binding energy -1.075 eV and prevented the normal replication mechanisms in DNA. BNQDs have been shown to kill the breast cancer cell MCF-7 extensively as compared with the normal human keratinocyte cell HaCaT. The cytotoxicity of BNQDs may be correlated with reduced reactive oxygen species level and increased apoptosis in MCF-7 cells, which may be liable to enhance the anticancerous activity of DOX. The results provide a base to develop BNQD-DOX as a more effective anticancer drug.

Determining the gas composition for the growth of BNNTs using a thermodynamic approach

B₂N molecules are determined to be major nitrogen-containing gas phase precursors for the growth of BNNTs on boron droplets.

Growth of boron nitride nanotubes from magnesium diboride catalysts

The difficulty in synthesizing boron nitride nanotubes (BNNTs) in a conventional horizontal tube furnace by chemical vapor deposition (CVD) may be ascribed to the failure to identify suitable catalysts and nucleation particles. This report demonstrates that magnesium diboride (MgB₂) can effectively catalyze the growth of BNNTs in such a tube furnace from various boron sources, including boron oxide (B₂O₃), boric acid (H₃BO₃), and a mixture of boron (B) and calcium oxide (CaO). This catalyst is more efficient than the possible magnesium oxide (MgO) or magnesium nitride (Mg₃N₂) catalysts. MgB₂ efficiently catalyzes the formation of BNNTs by maintaining a liquid state and showing a dissolving capacity for B₂O₃ at the growth temperature, thus satisfying the criteria for the vapor-liquid-solid (VLS) mechanisms of one-dimensional nanomaterials. First-principles simulations demonstrate that B₂O₃ can be dissolved into the MgB₂ nanoparticle. We believe that the strong catalytic behavior of MgB₂ can be attributed to its robust nucleation for BNNTs and dissolubility for B₂O₃.

Catalytic synthesis of boron nitride nanotubes at low temperatures

KFeO₂ is demonstrated to be an efficient catalyst for the formation of boron nitride nanotubes (BNNT) by thermal chemical vapor deposition (TCVD). This alkali-based catalyst enables the formation of crystalline, multi-walled BNNTs with high aspect ratio at temperatures as low as 750 °C, significantly lower than those typically required for the product formation by TCVD.

Catalytic CVD synthesis of boron nitride and carbon nanomaterials - synergies between experiment and theory

Low-dimensional carbon and boron nitride nanomaterials - hexagonal boron nitride, graphene, boron nitride nanotubes and carbon nanotubes - remain at the forefront of advanced materials research. Catalytic chemical vapour deposition has become an invaluable technique for reliably and cost-effectively synthesising these materials. In this review, we will emphasise how a synergy between experimental and theoretical methods has enhanced the understanding and optimisation of this synthetic technique. This review examines recent advances in the application of CVD to synthesising boron nitride and carbon nanomaterials and highlights where, in many cases, molecular simulations and quantum chemistry have provided key insights complementary to experimental investigation. This synergy is particularly prominent in the field of carbon nanotube and graphene CVD synthesis, and we propose here it will be the key to future advances in optimisation of CVD synthesis of boron nitride nanomaterials, boron nitride - carbon composite materials, and other nanomaterials generally.

Copper catalyzed growth of hexagonal boron nitride nanotubes on a tungsten substrate

Copper nanoparticles were introduced as the catalyst for the direct growth of BNNTs on a metallic substrate leading to their direct application in electronics.

Freestanding Boron Nitride Nanosheet Films for Ultrafast Oil/Water Separation

Freestanding boron nitride nanosheet (BNNS) films with designed structures are first fabricated by chemical vapor deposition (CVD) methods. As-prepared freestanding BNNS films exhibit outstanding hydrophobicity and lipophilicity properties. Such brilliant behaviors make them applicable in oil/water separation with very high fluxes up to 1 200 000 L m^-2 h^-1 bar^-1 and excellent separation efficiencies (ppm level in terms of the water content in the filtrate).

Boron Nitride Nanotubes: Recent Advances in Their Synthesis, Functionalization, and Applications

A comprehensive overview of current research progress on boron nitride nanotubes (BNNTs) is presented in this article. Particularly, recent advancements in controlled synthesis and large-scale production of BNNTs will first be summarized. While recent success in mass production of BNNTs has opened up new opportunities to implement the appealing properties in various applications, concerns about product purity and quality still remain. Secondly, we will summarize the progress in functionalization of BNNTs, which is the necessary step for their applications. Additionally, selected potential applications in structural composites and biomedicine will be highlighted.

Synthesis of Highly Crystalline Multilayered Boron Niride Microflakes

Boron niride microflakes of 2-5 μm in diameter and greater than 40 μm in length with multilayer structure and highly crystalline nature are synthesized in two states of catalysts and dual role of nitrogen at 1100 °C. Most of the microflakes are flat, smooth and vertically aligned with a wall-like view from the top. Transmission electron microscopy shows overlapped layers of microflakes with an interlayer spacing of 0.34 nm. The h-BN components of the synthesized microflakes are verified from B 1s and N1 s peaks at 190. 7 and 397.9 eV. Raman shift at 1370 (cm(-1)) and sharp peaks in the XRD pattern further confirm the h-BN phase and crystalline nature of the synthesized microflakes. Microflakes of h-BN with the above characteristics are highly desirable for the development of a solid state neutron detector with higher detection efficiency.

Evolution of Irradiation-Induced Vacancy Defects in Boron Nitride Nanotubes

Irradiation-induced vacancy defects in multiwalled (MW) boron nitride nanotubes (BNNTs) are investigated via in situ high-resolution transmission electron microscope operated at 80 kV, with a homogeneous distribution of electron beam intensity. During the irradiation triangle-shaped vacancy defects are gradually generated in MW BNNTs under a mediate electron current density (30 A cm(-2)), by knocking the B atoms out. The vacancy defects grow along a well-defined direction within a wall at the early stage as a result of the curvature induced lattice strain, and then develop wall by wall. The orientation or the growth direction of the vacancy defects can be used to identify the chirality of an individual wall. With increasing electron current density, the shape of the irradiation-induced vacancy defects changes from regular triangle to irregular polygon.

New Flexible Channels for Room Temperature Tunneling Field Effect Transistors

Tunneling field effect transistors (TFETs) have been proposed to overcome the fundamental issues of Si based transistors, such as short channel effect, finite leakage current, and high contact resistance. Unfortunately, most if not all TFETs are operational only at cryogenic temperatures. Here we report that iron (Fe) quantum dots functionalized boron nitride nanotubes (QDs-BNNTs) can be used as the flexible tunneling channels of TFETs at room temperatures. The electrical insulating BNNTs are used as the one-dimensional (1D) substrates to confine the uniform formation of Fe QDs on their surface as the flexible tunneling channel. Consistent semiconductor-like transport behaviors under various bending conditions are detected by scanning tunneling spectroscopy in a transmission electron microscopy system (in-situ STM-TEM). As suggested by computer simulation, the uniform distribution of Fe QDs enable an averaging effect on the possible electron tunneling pathways, which is responsible for the consistent transport properties that are not sensitive to bending.

Synthesis of Few-Atomic-Layer BN Hollow Nanospheres and Their Applications as Nanocontainers and Catalyst Support Materials

In this work, few-atomic-layer boron nitride (BN) hollow nanospheres were directly synthesized via a modified CVD method followed by subsequent high-temperature degassing treatment. The encapsulated impurities in the hollow nanospheres were effectively removed during the reaction process. The BN shells of most nanospheres consisted of 2-6 atomic layers. Because of the low thickness, the obtained BN hollow nanospheres presented excellent performance in many aspects. For instance, they were demonstrated as useful nanocontainers for controllable multistep release of iodine, which could diffuse and be encapsulated into the few-layer BN hollow nanospheres when heating. They were also promising support materials that could markedly increase the photocatalytic activity of TiO2 nanocrystals.

Near-Field Infrared Pump-Probe Imaging of Surface Phonon Coupling in Boron Nitride Nanotubes

Surface phonon modes are lattice vibrational modes of a solid surface. Two common surface modes, called longitudinal and transverse optical modes, exhibit lattice vibration along or perpendicular to the direction of the wave. We report a two-color, infrared pump-infrared probe technique based on scattering type near-field optical microscopy (s-SNOM) to spatially resolve coupling between surface phonon modes. Spatially varying couplings between the longitudinal optical and surface phonon polariton modes of boron nitride nanotubes are observed, and a simple model is proposed.

Systematic investigation of the ball milling–annealing growth and electrical properties of boron nitride nanotubes

Boron nitride nanotubes (BNNTs) were grown on stainless-steel substrates by ball milling–annealing in an N₂/H₂ atmosphere.

In situ growth behavior of boron nitride nanotubes on the surface of silicon carbide fibers as hierarchical reinforcements

BNNTs grown in situ on the surface of silicon carbide fibers via a simplified ball milling, impregnation and annealing method using boron powder as the raw material were synthesized.

A Simple and Universal Technique To Extract One- and Two-Dimensional Nanomaterials from Contaminated Water

We demonstrate a universal approach to extract one- and two-dimensional nanomaterials from contaminated water, which is based on a microscopic oil-water interface trapping mechanism. Results indicate that carbon nanotubes, graphene, boron nitride nanotubes, boron nitride nanosheets, and zinc oxide nanowires can be successfully extracted from contaminated water at a successful rate of nearly 100%. The effects of surfactants, particle shape, and type of organic extraction fluids are evaluated. The proposed extraction mechanism is also supported by in situ monitoring of the extraction process. We believe that this extraction approach will prove important for the purification of water contaminated by nanoparticles and will support the widespread adoption of nanomaterial applications.

Towards InAs/InGaAs/GaAs Quantum Dot Solar Cells Directly Grown on Si Substrate

This paper reports on an initial assessment of the direct growth of In(Ga)As/GaAs quantum dots (QDs) solar cells on nanostructured surface Si substrate by molecular beam epitaxy (MBE). The effect of inserting 40 InAs/InGaAs/GaAs QDs layers in the intrinsic region of the heterojunction pin-GaAs/n⁺-Si was evaluated using photocurrent spectroscopy in comparison with pin-GaAs/n⁺-Si and pin-GaAs/GaAs without QDs. The results reveal the clear contribution of the QDs layers to the improvement of the spectral response up to 1200 nm. The novel structure has been studied by X ray diffraction (XRD), photoluminescence spectroscopy (PL) and transmission electron microscopy (TEM). These results provide considerable insights into low cost III-V material-based solar cells.

Switching Behaviors of Graphene-Boron Nitride Nanotube Heterojunctions

High electron mobility of graphene has enabled their application in high-frequency analogue devices but their gapless nature has hindered their use in digital switches. In contrast, the structural analogous, h-BN sheets and BN nanotubes (BNNTs) are wide band gap insulators. Here we show that the growth of electrically insulating BNNTs on graphene can enable the use of graphene as effective digital switches. These graphene-BNNT heterojunctions were characterized at room temperature by four-probe scanning tunneling microscopy (4-probe STM) under real-time monitoring of scanning electron microscopy (SEM). A switching ratio as high as 10⁵ at a turn-on voltage as low as 0.5 V were recorded. Simulation by density functional theory (DFT) suggests that mismatch of the density of states (DOS) is responsible for these novel switching behaviors.

Nanosheet-structured boron nitride spheres with a versatile adsorption capacity for water cleaning

Here, we report the synthesis of nanosheet-structured boron nitride spheres (NSBNSs) by a catalyzing thermal evaporation method from solid B powders. The NSBNSs consist of radially oriented ultrathin nanosheets with the sheet edges oriented on the surface. Formation of this unique structure occurs only at a certain reaction temperature. The diameter from 4 μm to 700 nm and the nanosheet thickness from 9.1 to 3.1 nm of the NSBNSs can be well-controlled by appropriately changing the mass ratio of boron powders and catalyst. The NSBNSs possess versatile adsorption capacity, exhibiting excellent adsorption performance for oil, dyes, and heavy metal ions from water. The oil uptake reaches 7.8 times its own weight. The adsorption capacities for malachite green and methylene blue are 324 and 233 mg/g, while those for Cu(2+), Pb(2+), and Cd(2+) are 678.7, 536.7, and 107.0 mg/g, respectively. The adsorption capacities of the NSBNSs for Cu(2+) and Pb(2+) are higher or much higher than those of the adsorbents reported previously. These results demonstrate the great potential of NSBNSs for water treatment and cleaning.

Synthesis of boron nitride nanotubes and their applications

Boron nitride nanotubes (BNNTs) have been increasingly investigated for use in a wide range of applications due to their unique physicochemical properties including high hydrophobicity, heat and electrical insulation, resistance to oxidation, and hydrogen storage capacity. They are also valued for their possible medical and biomedical applications including drug delivery, use in biomaterials, and neutron capture therapy. In this review, BNNT synthesis methods and the surface modification strategies are first discussed, and then their toxicity and application studies are summarized. Finally, a perspective for the future use of these novel materials is discussed.

Synthesis of boron nitride nanotubes via chemical vapour deposition: a comprehensive review

Boron nitride nanotubes (BNNTs) have been synthesized by various methods over the last two decades.