Chitosan-coated anisotropic silver nanoparticles as a SERS substrate for single-molecule detection

New insights into the surface Enhanced Raman Scattering (SERS) response of adenine using chemometrics

The SERS response of adenine is one of the most studied, due to its outstanding exaltation. However, the spectra obtained strongly differ according to the experimental conditions and still remain not well understood. To be able to search for the presence of this molecule in complex environments, it is essential to better understand the SERS response of adenine alone. After a brief presentation of the literature on the subject, we present results suggesting that the experimental spectra would result from the overlap of different spectroscopic signatures, that may probably be due to different non-covalent interactions or different electromagnetic fields experienced by adenine molecules. An independent component analysis is reported. Our results underline the difficulty to precisely analyze the experimental data, the need to continue this research and to constitute data banks that would allow comparing the spectra obtained in different laboratories according to the experimental conditions.

Chitosan supported silver nanostructures as surface-enhanced Raman scattering sensor: Spectroscopic and density functional theory insights

In this work, nanostructures comprising silver nanoparticles supported on a wrinkled chitosan matrix (Ag@Ch) were successfully synthesized by a simple aging process at room temperature for four days through self-assembly. Chitosan, a natural polysaccharide was used as a support as well as a reducing agent for the formation of Ag nanostructures and the creation of hotspots for SERS activity. The fabricated Ag@Ch nanostructures were characterized by several spectroscopic techniques and were used as a surface-enhanced Raman scattering (SERS) substrate. The effect of wet, dry, and liquid samples on the SERS enhancement has been studied and was found to be effective for sensing Methylene blue, Crystal Violet, and p-Nitrophenol with detection limits of 3.8, 8.1, and 8.2 ppb respectively. The SERS enhancement of the Ag@Ch was attributed to the combination of both electromagnetic (EM) and chemical effects (CE). Density functional theory (DFT) calculations were used to explain the observed surface enhancement. Good agreement was observed between the experimental and simulated spectra.

Metallic and Non-Metallic Plasmonic Nanostructures for LSPR Sensors

Localized surface plasmonic resonance (LSPR) provides a unique scheme for light management and has been demonstrated across a large variety of metallic nanostructures. More recently, non-metallic nanostructures of two-dimensional atomic materials and heterostructures have emerged as a promising, low-cost alternative in order to generate strong LSPR. In this paper, a review of the recent progress made on non-metallic LSPR nanostructures will be provided in comparison with their metallic counterparts. A few applications in optoelectronics and sensors will be highlighted. In addition, the remaining challenges and future perspectives will be discussed.

Investigation on anti-quorum sensing activities of chitosan AgNP's-chitosanase against MDR pathogens

Marine bio-nanotechnology is a new promising field having high perspective in the area of biological research. In 2018 the production of crustacean shells especially from shrimp is about 54,500 tons on South East coast of India. The current study focuses on the use of extracted chitosan (Squilla shells) polymer in silver nanoparticle synthesis along with immobilized chitosanase synergistically improves the antimicrobial and quorum quenching effects against the multi drug resistant (MDR) pathogens. The main objective of the study is to synthesize the chitosan AgNPs and to immobilize the enzyme chitosanase with it and to study the anti quorum sensing (quorum quenching) activity against MDR pathogens. This study will render a new ideology to eliminate biofilm formation and suppress the pathogenicity of planktonic MDR pathogens. Since the combinations of chitosanase, as well as chitosan AgNPs, are very efficient in eliminating them.

Ag Nanoparticles@Agar Gel as a 3D Flexible and Stable SERS Substrate with Ultrahigh Sensitivity

Flexible surface-enhanced Raman scattering (SERS) substrates have become one of the research hot spots due to the facile sampling by swabbing or wrapping on rough surfaces and the sensitive and nondestructive detection of contaminants. In this work, we proposed a simple and fast in situ reduction method to prepare Ag nanoparticles (Ag NPs) composited agar hydrogel (Ag NPs@Agar) flexible SERS substrate. Owing to the three-dimensional (3D) structure, good hydrophilicity and adsorption of the agar hydrogel, Ag NPs were grown uniformly in the 3D cross-linked structure. The distribution density of Ag NPs was further increased by the volume shrinkage when the hydrogel was dried in air. This high density and uniformly distribution of Ag NPs produced a large number of highly active SERS regions. In addition, the sensitivity of Ag NPs@Agar was further improved with the assistance of hydrophilic agar gel, which can trap the probe molecules into highly active SERS areas. The SERS results showed that the substrate can be used to detect dye molecules (rhodamine 6G), the minimum detectable concentration was 10^-15 M, the relative standard deviation tested at 18 different positions was only 7.58%, and the intensity of the characteristic peak at 611 cm^-1 decreased only about 10% after 49 days of storage, demonstrating the superior stability. Moreover, the Ag NPs@Agar substrate also could successfully achieve the micro-trace detection of melamine and sodium penicillin G in Xinjiang specialty camel milk powder. The above available results show that the prepared flexible Ag NPs@Agar SERS substrates possess potentials for the illegal additives and antibiotics in food safety analysis.

Trends in Application of SERS Substrates beyond Ag and Au, and Their Role in Bioanalysis

This article compares the applications of traditional gold and silver-based SERS substrates and less conventional (Pd/Pt, Cu, Al, Si-based) SERS substrates, focusing on sensing, biosensing, and clinical analysis. In recent decades plethora of new biosensing and clinical SERS applications have fueled the search for more cost-effective, scalable, and stable substrates since traditional gold and silver-based substrates are quite expensive, prone to corrosion, contamination and non-specific binding, particularly by S-containing compounds. Following that, we briefly described our experimental experience with Si and Al-based SERS substrates and systematically analyzed the literature on SERS on substrate materials such as Pd/Pt, Cu, Al, and Si. We tabulated and discussed figures of merit such as enhancement factor (EF) and limit of detection (LOD) from analytical applications of these substrates. The results of the comparison showed that Pd/Pt substrates are not practical due to their high cost; Cu-based substrates are less stable and produce lower signal enhancement. Si and Al-based substrates showed promising results, particularly in combination with gold and silver nanostructures since they could produce comparable EFs and LODs as conventional substrates. In addition, their stability and relatively low cost make them viable alternatives for gold and silver-based substrates. Finally, this review highlighted and compared the clinical performance of non-traditional SERS substrates and traditional gold and silver SERS substrates. We discovered that if we take the average sensitivity, specificity, and accuracy of clinical SERS assays reported in the literature, those parameters, particularly accuracy (93-94%), are similar for SERS bioassays on AgNP@Al, Si-based, Au-based, and Ag-based substrates. We hope that this review will encourage research into SERS biosensing on aluminum, silicon, and some other substrates. These Al and Si based substrates may respond efficiently to the major challenges to the SERS practical application. For instance, they may be not only less expensive, e.g., Al foil, but also in some cases more selective and sometimes more reproducible, when compared to gold-only or silver-only based SERS substrates. Overall, it may result in a greater diversity of applicable SERS substrates, allowing for better optimization and selection of the SERS substrate for a specific sensing/biosensing or clinical application.

Plasmonic features of free-standing chitosan nanocomposite film with silver and graphene oxide for SERS applications

A scalable procedure of SERS substrates design was developed using a novel plasmonic structure based on a freestanding chitosan film, silver nanoparticles, and graphene oxide. Chitosan provides a uniform distribution of silver nanoparticles from a colloidal suspension and, therefore, a reproducible Raman signal from local areas of measurements of several tens of microns. The addition of graphene oxide (GO) to the colloidal solution of silver nanoparticles suppresses the tortuous background fluorescence signal from the analyte and leads to an increase in the signal-to-fluorescence background intensity ratio by up to 6 times as compared to structures without GO. The manufactured plasmonic polymer nanocomposite provides a detection limit of down to 100 pM for R6G using a laser wavelength of 532 nm through a portable ×10 objective. The high colloidal stability of GO in water and the use of an aqueous colloid of silver nanoparticles simplify the procedure for creating a substrate by applying the GO-silver composite on the surface of a chitosan film without a need to form a GO film. Therefore, our approach paves a promising avenue to provide more sensitive detection even for the fluorescent analytes with short-wavelength lasers (532, 633 nm) instead of IR (785, 1024 nm) and foster the practical application of the developed plasmonic composites on portable Raman spectrometers.

In Situ Growth of Silver Nanoparticles on Chitosan Matrix for the Synthesis of Hybrid Electrospun Fibers: Analysis of Microstructural and Mechanical Properties

A viable alternative for the next generation of wound dressings is the preparation of electrospun fibers from biodegradable polymers in combination with inorganic nanoparticles. A poly(vinyl alcohol)-chitosan-silver nanoparticles (PVA-CTS-Ag NPs) system has been developed for antimicrobial and wound healing applications. Here, the preparation of PVA-CTS-Ag electrospun fibers using a two-step process is reported in order to analyze changes in the microstructural, mechanical, and antibacterial properties and confirm their potential application in the biomedical field. The Ag nanoparticles were well-dispersed into the chitosan matrix and their cubic structure after the electrospinning process was also retained. The Ag NPs displayed an average diameter of ~33 nm into the CTS matrix, while the size increased up to 213 nm in the PVA-CTS-Ag(NPs) fibers. It was observed that strong chemical interactions exist between organic (CTS) and inorganic phases through nitrogenous groups and the oxygen of the glycosidic bonds. A defect-free morphology was obtained in the PVA-CTS-Ag NPs final fibers with an important enhancement of the mechanical properties as well as of the antibacterial activity compared with pure PVA-CTS electrospun fibers. The results of antibacterial activity against E. coli and S. aureus confirmed that PVA-CTS-Ag(NPs) fibers can be potentially used as a material for biomedical applications.

MoS2 Nanodonuts for High-Sensitivity Surface-Enhanced Raman Spectroscopy

Nanohybrids of graphene and two-dimensional (2D) layered transition metal dichalcogenides (TMD) nanostructures can provide a promising substrate for extraordinary surface-enhanced Raman spectroscopy (SERS) due to the combined electromagnetic enhancement on TMD nanostructures via localized surface plasmonic resonance (LSPR) and chemical enhancement on graphene. In these nanohybrid SERS substrates, the LSPR on TMD nanostructures is affected by the TMD morphology. Herein, we report the first successful growth of MoS₂ nanodonuts (N-donuts) on graphene using a vapor transport process on graphene. Using Rhodamine 6G (R6G) as a probe, SERS spectra were compared on MoS₂ N-donuts/graphene nanohybrids substrates. A remarkably high R6G SERS sensitivity up to 2 × 10⁻¹² M has been obtained, which can be attributed to the more robust LSPR effect than in other TMD nanostructures such as nanodiscs as suggested by the finite-difference time-domain simulation. This result demonstrates that non-metallic TMD/graphene nanohybrids substrates can have SERS sensitivity up to one order of magnitude higher than that reported on the plasmonic metal nanostructures/2D materials SERS substrates, providing a promising scheme for high-sensitivity, low-cost applications for biosensing.

Fabrication and Comparative Quantitative Analysis of Plasmonic-Polymer Nanocomposites as Optical Platforms

Plasmonic-polymer nanocomposites can serve as a multifunctional platform for a wide range of applications such as biochemical sensing and photothermal treatments, where they synergistically benefit from the extraordinary optical properties of plasmonic nanoparticles (NPs) and biocompatible characteristics of biopolymers. The field translation of plasmonic-polymer nanocomposites requires design rules for scalable and reproducible fabrication with tunable and predictable optical properties and achieving the best performance. The optical properties of NPs and the optimal analytical performance of nanocomposites could be affected by many fabrication parameters, but a fundamental understanding of such parameters is still minimal. Herein, we systematically investigated the NP distribution and their optical properties in gold nanostar (GNS)-polymer nanocomposites as a function of GNS concentration, polymer identity, and the method of GNS incorporation into a polymer matrix. We performed a comprehensive analysis of the single-particle scattering spectra of GNS incorporated into agarose gel and chitosan hydrogels via embedding and surface deposition, using dark-field spectroscopy. While relative GNS concentration affects the GNS scattering property distribution in both polymer matrices, chemical interactions between a polymer matrix and GNS is the key determinant of the GNS stability and homogenous distribution in nanocomposites. When GNS are embedded in a polymer matrix and there are stronger chemical interactions between GNS and a polymer, significantly less aggregation and a more homogenous distribution of GNS, which leads to a larger percentage of GNS optical property preservation, were observed at all the concentrations. In a proof-of-concept surface-enhanced Raman spectroscopy (SERS) study, we observed that the SERS detection efficiency is dictated by the analyte accessibility of GNS, which is governed by the polymer matrix porosity, polymer-GNS interactions, and other polymer physical characteristics. This work presents the interplay between key fabrication parameters and foundational design parameters for more predictable and reliable fabrication of plasmonic-polymer nanocomposites as an optical platform.

Porous Hybrids Structure between Silver Nanoparticle and Layered Double Hydroxide for Surface-Enhanced Raman Spectroscopy

Silver nanoparticle (AgNP), in terms of antibacterial, catalytic, electronic, and optical applications, is an attractive material. Especially, when prepared to furnish sharp edge and systematic particle orientation on the substrate, AgNPs can take advantage of surface-enhanced Raman spectroscopy (SERS). In this research, we suggested a synthetic method to immobilize the AgNP on metal oxide by utilizing Ag-thiolate and layered double hydroxide (LDH) as precursor and template, respectively. The layer-by-layer structure of LDH and Ag-thiolate transformed through reductive calcination to metal oxide and AgNP array. Physicochemical characterization, including powder X-ray diffraction, N₂ adsorption–desorption, microscopies, and X-ray photoelectron spectroscopy, revealed that the AgNP with sufficient crystallinity and particle gap was obtained at relatively high calcination temperature, ~600 °C. UV-vis diffusion reflectance spectroscopy showed that the calcination temperature affected particle size and electronic structure of AgNP. The prepared materials were subjected to SERS tests toward 4-nitrothiophenol (4-NTP). The sample obtained at 600 °C exhibited 50 times higher substrate enhancement factor (SEF) than the one obtained at 400 °C, suggesting that the calcination temperature was a determining parameter to enhance SERS activity in current synthetic condition.

Silver-chitosan nanocomposite as a plasmonic platform for SERS sensing of polyaromatic sulfur heterocycles in oil fuel

Herein, a silver-chitosan nanocomposite for application in surface enhanced Raman spectroscopy (SERS) sensing was proposed. It was shown that optically transparent chitosan coatings with 0.8 μm thickness allow penetration of target analytes to silver nanoparticles and the analysis in both polar and nonpolar solvents. Under the chosen conditions, chitosan formed continuously smooth films and coatings stabilizing rough nanostructured metallic surfaces and served as a suitable matrix for immobilization, uniform spreading, and preconcentration of the analytes. Polycyclic aromatic sulfur heterocycles were chosen as target analytes being one of the most important fuel quality markers, hazardous components, and the hardest-to-remove impurities. For the most effective immobilization and even distribution of the analytes onto a nanostructured metallic surface, an additional polymer layer of chitosan was found to be needed. The presence of thin films of chitosan resulted in higher reproducibility of SERS spectra as compared to bare nanostructured silver substrates. Additionally, the developed nanocomposite SERS sensors provided the rapid determination of dibenzothiophene and its derivatives in isooctane with the threshold of detection better than 0.1 μM. This approach was successfully applied in the analysis of real fuel samples and the results agreed well with independently measured FTIR and GC-MS data.

Silver Nanoparticles on Chitosan/Silica Nanofibers: Characterization and Antibacterial Activity

A simple, low-cost, and reproducible method for creating materials with even silver nanoparticles (AgNP) dispersion was established. Chitosan nanofibers with silica phase (CS/silica) were synthesized by an electrospinning technique to obtain highly porous 3D nanofiber scaffolds. Silver nanoparticles in the form of a well-dispersed metallic phase were synthesized in an external preparation step and embedded in the CS/silica nanofibers by deposition for obtaining chitosan nanofibers with silica phase decorated by silver nanoparticles (Ag/CS/silica). The antibacterial activity of investigated materials was tested using Gram-positive and Gram-negative bacteria. The results were compared with the properties of the nanocomposite without silver nanoparticles and a colloidal solution of AgNP. The minimum inhibitory concentration (MIC) of obtained AgNP against Staphylococcus aureus (S. aureus) ATCC25923 and Escherichia coli (E. coli) ATCC25922 was determined. The physicochemical characterization of Ag/CS/silica nanofibers using various analytical techniques, as well as the applicability of these techniques in the characterization of this type of nanocomposite, is presented. The resulting Ag/CS/silica nanocomposites (Ag/CS/silica nanofibers) were characterized by small angle X-ray scattering (SAXS), X-ray diffraction (XRD), and atomic force microscopy (AFM). The morphology of the AgNP in solution, both initial and extracted from composite, the properties of composites, the size, and crystallinity of the nanoparticles, and the characteristics of the chitosan fibers were determined by electron microscopy (SEM and TEM).

Recent Advances in Protein Kinase Activity Analysis Based on Nanomaterials

Protein phosphorylation regulated by protein kinases, as well as their dephosphorylation, is one of the most common post-translational modifications, and plays important roles in physiological activities, such as intracellular signal communications, gene transcription, cell proliferation and apoptosis. Over-expression of protein kinases is closely associated with various diseases. Consequently, accurate detection of protein kinases activities and their relevant inhibitors screening is critically important, not only to the biochemical research, but also to the clinical diagnosis and therapy. Nanomaterials, taking advantage of large surface areas, as well as excellent electrical, catalytic, magnetic and optical properties, have been utilized as target concentrators, recognition components, signal transducer or amplification elements in protein kinase related assays. This review summarizes the recent representative works to highlight the applications of nanomaterials in different biosensor technologies for protein kinases activities detection and their inhibitors screening. First, different nanomaterials developed for phosphoprotein/phosphopeptide enrichment and phosphate recognition are introduced. Next, representative works are selected that mainly focus on the utilization of nanomaterials as signal transducer or amplification elements in various protein kinases sensing platforms, such as electrochemical, colorimetric, fluorescent, and mass spectroscopy-based approaches. Finally, the major challenges and perspectives of nanomaterials being applied in protein kinases related assays are discussed.

SERS-active metal-organic frameworks with embedded gold nanoparticles

Surface-enhanced Raman scattering (SERS) has been widely used in the detection of targets and strongly depends on the interaction and the distance between the targets and nanoparticles. Herein, metal-organic frameworks (MOFs) were first easily synthesized on a large scale via a water bath method, especially Uio-66 and Uio-67. MOFs embedded with gold nanoparticles (AuNPs) for SERS enhancement were successfully fabricated via an impregnation strategy. The synthesized AuNPs/MOF-199, AuNPs/Uio-66, and AuNPs/Uio-67 composites, with LSPR properties and high adsorption capability of MOFs to preconcentrate the analytes close to the surface of the AuNPs, exhibited excellent SERS activity. The effects of the reducing concentrations of sodium citrate on the SERS activity, and the stability and reproducibility of the AuNP/MOFs have been discussed via the detection of acetamiprid. The SERS intensity enhanced by the composites was retained for more than 40 days under ambient conditions with the reducing concentrations of sodium citrate at 0.16%, 0.20%, and 0.16%. The limits of detection with the signal/noise ratio higher than 3 at the characteristic peak 632 cm^-1 were 0.02 μM, 0.009 μM, and 0.02 μM for acetamiprid. Most interestingly, the AuNP/MOF-199 composites, whose morphology was long tube sheet, exhibited excellent SERS activity. These novel composites with high sensitivity, stability, and reproducibility provide a new route for the detection of pesticides via the SERS technology.

Shining Light on Chitosan: A Review on the Usage of Chitosan for Photonics and Nanomaterials Research

Chitosan (CS) is a natural polymer derived from chitin that has found its usage both in research and commercial applications due to its unique solubility and chemical and biological attributes. The biocompatibility and biodegradability of CS have helped researchers identify its utility in the delivery of therapeutic agents, tissue engineering, wound healing, and more. Industrial applications include cosmetic and personal care products, wastewater treatment, and corrosion protection, to name a few. Many researchers have published numerous reviews outlining the physical and chemical properties of CS, as well as its use for many of the above-mentioned applications. Recently, the cationic polyelectrolyte nature of CS was found to be advantageous for stabilizing fascinating photonic materials including plasmonic nanoparticles (e.g., gold and silver), semiconductor nanoparticles (e.g., zinc oxide, cadmium sulfide), fluorescent organic dyes (e.g., fluorescein isothiocyanate (FITC)), luminescent transitional and lanthanide complexes (e.g., Au(I) and Ru(II), and Eu(III)). These photonic systems have been extensively investigated for their usage in antimicrobial, wound healing, diagnostics, sensing, and imaging applications. Highlighted in this review are the different works involving some of the above-mentioned molecular-nano systems that are prepared or stabilized using the CS polymer. The advantages and the role of the CS for synthesizing and stabilizing the above-mentioned optically active materials have been illustrated.

Nanoplasmonic Alloy of Au/Ag Nanocomposites on Paper Substrate for Biosensing Applications

Plasmonic alloy has attracted much interest in tailoring localized surface plasmon resonance (LSPR) for recent biosensing techniques. In particular, paper-based plasmonic substrates allow capillary-driven lateral flow as well as three-dimensional metal nanostructures, and therefore they become actively transferred to LSPR-based biosensing such as surface-enhanced Raman spectroscopy (SERS) or metal-enhanced fluorescence (MEF). However, employing plasmonic alloy nanoislands on heat-sensitive substrate is still challenging, which significantly inhibits broad-range tailoring of the plasmon resonance wavelength (PRW) for superior sensitivity. Here we report paper-based plasmonic substrate with plasmonic alloy of Au/Ag nanocomposites for highly sensitive MEF and SERS biosensing applications. The nanofabrication procedures include concurrent deposition of Au and Ag below 100 °C without any damage on cellulose fibers. The Au/Ag nanocomposites feature nanoplasmonic alloy with single plasmon peak as well as broad-range tunability of PRW by composition control. This paper-based plasmonic alloy substrate enables about twofold enhancement of fluorescence signals and selective MEF after paper chromatography. The experimental results clearly demonstrate extraordinary enhancement in SERS signals for picomolar detection of folic acid as a cancer biomarker. This new method provides huge opportunities for fabricating plasmonic alloy on heat-sensitive substrate and biosensing applications.

Silver nanoflowers for single-particle SERS with 10 pM sensitivity

Surface-enhanced Raman scattering (SERS) has received considerable attention as a noninvasive optical sensing technique with ultrahigh sensitivity. While numerous types of metallic particles have been actively investigated as SERS substrates, the development of new SERS agents with high sensitivity and their reliable characterization are still required. Here we report the preparation and characterization of flower-shaped silver (Ag) nanoparticles that exhibit high-sensitivity single-particle SERS performance. Ag nanoflowers (NFs) with bud sizes in the range 220-620 nm were synthesized by the wet synthesis method. The densely packed nanoscale petals with thicknesses in the range 9-22 nm exhibit a large number of hot spots that significantly enhance their plasmonic activity. A single Ag NF particle (530-620 nm) can detect as little as 10^-11 M 4-mercaptobenzoic acid, and thus provides a sensitivity three orders of SERS magnitude greater than that of a spherical Ag nanoparticle. The analytical enhancement factors for single Ag NF particles were found to be as high as 8.0 × 10⁹, providing unprecedented high SERS detectivity at the single particle level. Here we present an unambiguous and systematic assessment of the SERS performances of the Ag NFs and demonstrate that they provide highly sensitive sensing platforms by single SERS particle.

Photochemical formation of chitosan-stabilized near-infrared-absorbing silver Nanoworms: A "Green" synthetic strategy and activity on Gram-negative pathogenic bacteria

A facile, single-step, non-seeded photochemical protocol for producing a new type of anisotropic silver nanostructure, "nanoworms", with curved longer dimensions and smooth, rounded edges. The nanoworms exhibit surface plasmon resonance (SPR) absorption in the near-infrared window (NIRW) region and are stabilized using biocompatible polymer chitosan, rendering biocompatibility and amplified safety for biological utility of the composition. Both NIRW-absorbing nanoworms and visible-absorbing nanospheres herein are attained exclusively by employing green chemistry principles. Contrary to seed-mediated or polyol techniques, the protocol demonstrates the feasibility to selectively synthesize NIRW-absorbing silver nanostructures in a single step and in complete absence of any known reducing agent. The effect of irradiation, pH, and concentration of starting materials on the formation of nanoworms vs nanospheres is investigated in detail and analyzed by optical spectroscopy and electron microscopy. The dominant SPR obtained in the NIRW region of the nanoworms results from anisotropic AgNPs, as opposed to agglomeration. From TEM images, it is also very clear that a strong correlation exists between the SPR peak maximum and the size distribution of the anisotropic nanoworm structures, with SPR peak maximum exhibiting red shift with the increase in the size of the nanoworm population. Although there is significant size variation of different nanoworms of a given population, all samples exhibit remarkable stability. The nanoworms retained their NIRW-absorbing features even at physiological pH and at a constant ionic strength. The nanodispersions also retained their SPR features in King's B medium. Antipathogenic assays reveal that the anisotropic NIRW-absorbing nanoworms exhibit the highest growth inhibition compared to other spherical nanosilver and molecular silver forms on Gram-negative pathogenic bacteria, Pseudomonas syringae pv. maculicola ES4326 and P. syringae pv. tomato DC3000. These results underscore shape effects of AgNPs and suggest that nanoworms favor the adhesion to (curved) rod-shaped Gram-negative bacteria, resulting in the highest inhibition compared to isotropic AgNPs (smaller spheres), sulfa antibiotics (silver sulfadiazine), and silver ions (AgNO₃).

Detection of extremely low concentration waterborne pathogen using a multiplexing self-referencing SERS microfluidic biosensor

BACKGROUND

It is challenging to achieve ultrasensitive and selective detection of waterborne pathogens at extremely low levels (i.e., single cell/mL) using conventional methods. Even with molecular methods such as ELISA or PCR, multi-enrichment steps are needed which are labor and cost intensive. In this study, we incorporated nano-dielectrophoretic microfluidic device with Surface enhanced Raman scattering (SERS) technique to build a novel portable biosensor for easy detection and characterization of Escherichia coli O157:H7 at high sensitivity level (single cell/mL).

RESULTS

A multiplexing dual recognition SERS scheme was developed to achieve one-step target detection without the need to separate target-bound probes from unbound ones. With three different SERS-tagged molecular probes targeting different epitopes of the same pathogen being deployed simultaneously, detection of pathogen targets was achieved at single cell level with sub-species specificity that has not been reported before in single-step pathogen detection.

CONCLUSION

The self-referencing protocol implements with a Nano-dielectrophoretic microfluidic device potentially can become an easy-to-use, field-deployable spectroscopic sensor for onsite detection of pathogenic microorganisms.

Surface-enhanced Raman spectroscopy and microfluidic platforms: challenges, solutions and potential applications

The review provides an overview of the development in the field of surface-enhanced Raman spectroscopy combined with microfluidic platforms.

Selective modification of nanoparticle arrays by laser-induced self assembly (MONA-LISA): putting control into bottom-up plasmonic nanostructuring

Nano-structuring of metals is one of the greatest challenges for the future of plasmonic and photonic devices. Such a technological challenge calls for the development of ultra-fast, high-throughput and low-cost fabrication techniques. Laser processing, accounts for the aforementioned properties, representing an unrivalled tool towards the anticipated arrival of modules based in metallic nanostructures, with an extra advantage: the ease of scalability. In the present work we take advantage of the ability to tune the laser wavelength to either match the absorption spectral profile of the metal or to be resonant with the plasma oscillation frequency, and demonstrate the utilization of different optical absorption mechanisms that are size-selective and enable the fabrication of pre-determined patterns of metal nanostructures. Thus, we overcome the greatest challenge of Laser Induced Self Assembly by combining simultaneously large-scale character with atomic-scale precision. The proposed process can serve as a platform that will stimulate further progress towards the engineering of plasmonic devices.

Controlled stepwise-synthesis of core-shell Au@MIL-100 (Fe) nanoparticles for sensitive surface-enhanced Raman scattering detection

A novel porous Au@MIL-100 (Fe) core-shell structure in which a Au nanoparticle (AuNP) core is coated with a controllable uniform metal-organic framework shell has been fabricated by using a facile step-by-step procedure. The as-synthesized Au@MIL-100 (Fe) takes advantage of the high adsorption capability of the MIL-100 (Fe) shell and the localized surface plasmon resonance properties of the AuNP core, and was used as a hybrid surface enhanced Raman scattering (SERS) substrate. We discussed the fabrication, physical characterization, and SERS activity of our novel substrate, and found that this new substrate had controllable shell thickness, high stability and good SERS activity. The potential practical application of the novel SERS substrate was firstly evaluated by quantitative analysis of malachite green in aquaculture water. The method showed good linearity between 3.0 × 10(-8)-1.0 × 10(-6) mol L(-1) for malachite green with a correlation coefficient of 0.9945. The limit of detection (LOD) was 8.0 × 10(-9) mol L(-1). Then the applicability of Au@MIL-100 (Fe) as the SERS substrate for in situ detection of malachite green on the fish body indicated its great potential as a rapid and on-site detection analytical strategy. In addition, the preliminary investigation also shows that the Au@MIL-100 (Fe) has SERS activity toward carbon disulfide which would be a new strategy for SERS-based gas sensors.

Chemical sensing with nanoparticles as optical reporters: from noble metal nanoparticles to quantum dots and upconverting nanoparticles

A wide variety of biological and medical analyses are based on the use of optical signals to report specific molecular events. Thanks to advances in nanotechnology, various nanostructures have been extensively used as optical reporters in bio- and chemical assays. This review describes recent progress in chemical sensing using noble metal nanoparticles (gold and silver), quantum dots and upconverting nanoparticles. It provides insights into various nanoparticle-based sensing strategies including fluorescence/luminescence resonance energy transfer nanoprobes as well as activatable probes sensitive to specific changes in the biological environment. Finally we list some research challenges to be overcome in order to accelerate the development of applications of nanoparticle bio- and chemical sensors.

SERS substrates fabricated with star-like gold nanoparticles for zeptomole detection of analytes

This work presents the design of substrates for Surface Enhanced Raman Scattering (SERS) using star-like gold nanoparticles which were synthesized using a wet chemical method and functionalized with 1-dodecanethiol. This molecule allowed us to obtain a spacing of ∼2.6 nm among gold stars, which promoted the generation of SERS hotspots for single molecule detection. The gold nanoparticles were deposited on silicon substrates or on gold coated silicon substrates by using the Langmuir-Blodgett method which permitted the zeptomole detection of Rhodamine B (total moles per laser spot area). The Raman enhancement factor (EF) achieved for this level of detection was 10(12), and was obtained on the SERS substrate fabricated with the configuration: Si/Au film/Au nanoparticles. Raman spectra of the molecules TWEEN 20 and p-terphenyl were also measured in order to elucidate the effect of the molecule's length on the enhancement factor. According to these results, our SERS substrates without the gold film are useful for a minimum detection level of ∼10(-14) moles of analytes with sizes equal to or less than 1.3 nm and ∼10(-18) moles of analytes with the gold film (total moles per sample).

Hybrid nanostructures for SERS: materials development and chemical detection

This review focuses on recent developments in hybrid and nanostructured substrates for SERS (surface-enhanced Raman scattering) studies. Thus substrates composed of at least two distinct types of materials, in which one is a SERS active metal, are considered here aiming at their use as platforms for chemical detection in a variety of contexts. Fundamental aspects related to the SERS effect and plasmonic behaviour of nanometals are briefly introduced. The materials described include polymer nanocomposites containing metal nanoparticles and coupled inorganic nanophases. Chemical approaches to tailor the morphological features of these substrates in order to get high SERS activity are reviewed. Finally, some perspectives for practical applications in the context of chemical detection of analytes using such hybrid platforms are presented.

A new calibration concept for a reproducible quantitative detection based on SERS measurements in a microfluidic device demonstrated on the model analyte adenine

This study demonstrates a new concept of calibrating surface enhanced Raman scattering (SERS) intensities without using additional substances as an internal standard and explores factors such as laser fluctuation and different Ag substrates, which affect the results of quantitative analyses based on SERS. To demonstrate the capabilities of the concept, the model analyte adenine has been chosen. A lab-on-a-chip device is applied for the measurements to guarantee consistent data recording. In order to simulate varied measuring conditions, two varying silver colloids (batch 1 and 2) are utilized as a SERS substrate and two different laser power levels (25 or 55 mW) are applied on the sample. A concentration gradient was generated which allows the use of the analyte itself for the correction of the resulting SERS spectra regarding intensity deviations caused by different ambient conditions. In doing so, a vast improvement in the quantification using SERS, especially in view of the comparability, reproducibility and repeatability, is demonstrated.

Fe2O3@Au core@shell nanoparticle–graphene nanocomposites as theranostic agents for bioimaging and chemo-photothermal synergistic therapy

Graphene-based magnetic and plasmonic nanocomposites (DOX–rGO–Fe₂O₃@Au NPs) have been prepared for magnetic-field-assisted drug delivery and chemo-photothermal synergistic therapy.

High performance SERS active substrates fabricated by directly growing graphene on Ag nanoparticles

An efficient surface enhanced Raman scattering (SERS) substrate of graphene-isolated Ag nanoparticle (G/AgNP) has been developed by using excimer laser to ablate the ordered pyrolytic graphite in high vacuum onto Ag nanoparticles.

Chitosan-modified silver@ruthenium hybrid nanoparticles: evaluation of physico-chemical properties and bio-affinity with sialic acid

A hybrid nanoparticle system composed of silver, ruthenium and chitosan for selective recognition of sialic acid based on fluorescence quenching.

Green synthesis of asymmetrically textured silver meso-flowers (AgMFs) as highly sensitive SERS substrates

Highly asymmetrical "flower-like" micron silver particles, so-called hierarchical silver meso-flowers (AgMFs), were facilely synthesized using ascorbic acid at room temperature in the presence of chitosan biopolymer. The time-evolution of TEM images and XRD analysis confirmed the anisotropic growth of AgMFs with single crystalline phase of which the formation mechanism was described in detail. The morphology and size of as-prepared AgMFs were tunable simply by changing the concentration of chitosan biopolymer and/or AgNO3 precursor under otherwise identical conditions. The asymmetrically textured AgMFs dramatically enhanced Raman signals of probe molecules (2-chlorothiophenol, 4-aminothiophenol) even at a single particle level because of their surface morphologies consisting of numerous nanoedges and crevices.

Heparin assisted photochemical synthesis of gold nanoparticles and their performance as SERS substrates

Reactive and pharmaceutical-grade heparins were used as biologically compatible reducing and stabilizing agents to photochemically synthesize colloidal gold nanoparticles. Aggregates and anisotropic shapes were obtained photochemically under UV black-light lamp irradiation (λ = 366 nm). Heparin-functionalized gold nanoparticles were characterized by Scanning Electron Microscopy and UV-Vis spectroscopy. The negatively charged colloids were used for the Surface Enhanced Raman Spectroscopy (SERS) analysis of differently charged analytes (dyes). Measurements of pH were taken to inspect how the acidity of the medium affects the colloid-analyte interaction. SERS spectra were taken by mixing the dyes and the colloidal solutions without further functionalization or addition of any aggregating agent.

Molecular plasmonics for nanoscale spectroscopy

Surface- and tip-enhanced Raman and LSPR spectroscopies have developed over the past 15 years as unique tools for uncovering the properties of single particles and single molecules that are unobservable in ensemble measurements. Measurements of individual events provide insight into the distribution of molecular properties that are averaged over in ensemble experiments. Raman and LSPR spectroscopy can provide detailed information on the identity of molecular species and changes in the local environment, respectively. In this review a detailed discussion is presented on single-molecule and single-particle Raman and LSPR spectroscopy focusing on the major developments in the fields and applications of the techniques.

Fabrication of gold nanoparticle-embedded metal-organic framework for highly sensitive surface-enhanced Raman scattering detection

Surface-enhanced Raman scattering (SERS) signals strongly rely on the interactions and distance between analyte molecules and metallic nanostructures. In this work, the use of a gold nanoparticle (AuNP)-embedded metal-organic framework was introduced for the highly sensitive SERS detection. The AuNPs were in situ grown and encapsulated within the host matrix of MIL-101 by a solution impregnation strategy. The as-synthesized AuNPs/MIL-101 nanocomposites combined the localized surface plasmon resonance properties of the gold nanoparticles and the high adsorption capability of metal-organic framework, making them highly sensitive SERS substrates by effectively preconcentrating analytes in close proximity to the electromagnetic fields at the SERS-active metal surface. We discussed the fabrication, physical characterization, and SERS activity of our novel substrates by measuring the Raman signals of a variety of model analytes. The SERS substrate was found to be highly sensitive, robust, and amiable to several different target analytes. A SERS detection limit of 41.75 and 0.54 fmol for Rhodamine 6G and benzadine, respectively, was demonstrated. The substrate also showed high stability and reproducibility, as well as molecular sieving effect thanks to the protective shell of the metal-organic framework. Subsequently, the potential practical application of the novel SERS substrate was evaluated by quantitative analysis of organic pollutant p-phenylenediamine in environmental water and tumor marker alpha-fetoprotein in human serum. The method showed good linearity between 1.0 and 100.0 ng/mL for p-phenylenediamine and 1.0-130.0 ng/mL for alpha-fetoprotein with the correlation coefficients of 0.9950 and -0.9938, respectively. The recoveries ranged from 80.5% to 114.7% for p-phenylenediamine in environmental water and 79.3% to 107.3% for alpha-fetoprotein in human serum. These results foresee promising application of the novel metal-organic framework based composites as sensitive SERS-active substrates in both environmental and clinical samples.

Folic acid-conjugated, SERS-labeled silver nanotriangles for multimodal detection and targeted photothermal treatment on human ovarian cancer cells

The effectiveness of a therapeutic agent for cancer stands in its ability to reduce and eliminate tumors without harming the healthy tissue nearby. Nanoparticles peripherally conjugated with targeting moieties offer major improvements in therapeutics through site specificity. In this study we demonstrate this approach by targeting the folate receptor of NIH:OVCAR-3 human ovary cancer cell line. Herein we used silver nanotriangles which were biocompatibilized with chitosan (bio)polymer, labeled with para-aminothiophenol (pATP) Raman reporter molecule, and conjugated with folic acid. The nanoparticles conjugation and efficient labeling was investigated by localized surface plasmon resonance (LSPR), zeta potential, and surface-enhanced Raman scattering (SERS) measurements. Conjugated particles were proven to be highly stable in aqueous and cellular medium. The targeted uptake of conjugated nanoparticles by human ovary cancer cells was confirmed by dark field microscopy and scattering spectra of the particles inside cells. Comparative studies revealed specific internalization of the conjugated nanoparticles in comparison with similar bare nanoparticles. Moreover, the SERS identity of the particles was proven to be highly conserved inside cells. Targeted cancer cell treatment conducted by irradiating the nanoparticle-treated cells with a continuous wave-nearinfrared (cw-NIR) laser in resonance with their plasmonic band proved an efficient therapeutic response. By integrating the advantages of multimodal optical imaging and SERS detection with hyperthermia capabilities through site specificity, these nanoparticles can represent a real candidate for personalized medicine.

A Self-Referencing Detection of Microorganisms Using Surface Enhanced Raman Scattering Nanoprobes in a Test-in-a-Tube Platform

Anisotropic nanoparticles (i.e., silver nanocubes) were functionalized with target-specific antibodies and Raman active tags to serve as nanoprobes for the rapid detection of bacteria in a test-in-a-tube platform. A self-referencing scheme was developed and implemented in which surface enhanced Raman spectroscopic (SERS) signatures of the targets were observed superimposed with the SERS signals of the Raman tags. The assessment through the dual signals (superimposed target and tag Raman signatures) supported a specific recognition of the targets in a single step with no washing/separation needed to a sensitivity of 102 CFU/mL, even in the presence of non-target bacteria at a 10 times higher concentration. The self-referencing protocol implemented with a portable Raman spectrometer potentially can become an easy-to-use, field-deployable spectroscopic sensor for onsite detection of pathogenic microorganisms.

Chitosan-coated triangular silver nanoparticles as a novel class of biocompatible, highly sensitive plasmonic platforms for intracellular SERS sensing and imaging

There is a need for new strategies for noninvasive imaging of pathological conditions within the human body. The approach of combining the unique physical properties of noble-metal nanoparticles with their chemical specificity and an easy way of conjugation open up new routes toward building bio-nano-objects for biomedical tracking and imaging. This work reports the design and assessment of a novel class of biocompatible, highly sensitive SERS nanotags based on chitosan-coated silver nanotriangles (Chit-AgNTs) labeled with para-aminothiophenol (p-ATP). The triangular nanoparticles are used as Raman scattering enhancers and have proved to yield a reproducible and strong SERS signal. When tested inside lung cancer cells (A549) this class of SERS nanotags presents low in vitro toxicity, without interfering with cell proliferation. Easily internalized by the cells, as demonstrated by imaging using both reflected bright-light optical microscopy and SERS spectroscopy, the particles are proved to be detectable inside cells under a wide window of excitation wavelengths, ranging from visible to near infrared (NIR). Their high sensitivity and NIR availability make this class of SERS nanotags a promising candidate for noninvasive imaging of cancer cells.

Metallic nanoparticles and their medicinal potential. Part I: gold and silver colloids

The article highlights the synthesis, properties and recent advances in therapeutic possibilities of metallic nanoparticles. Nanometallic structures that behave as drug-carrying agents, gene regulators, imaging agents and photoresponsive assemblies have been discussed in the context of cells and many debilitating diseases. These structures not only act as alternatives to molecule-based systems, but also possess new physical and chemical properties, which confer substantive advantages in medicinal field.

In situ-monitoring of biofilm formation by using surface-enhanced Raman scattering

A biofilm is a complex biochemical structure composed of microorganisms and extracellular polymeric substances used by microorganisms to adhere to each other and to surfaces. The monitoring of molecular changes during biofilm formation in situ can provide valuable insights in medicine, microbiology, and industrial processes. In this study, we investigated the characterization of biofilm produced by two model bacteria by using surface-enhanced Raman scattering (SERS) with the use of core silver (AgNPs)-shell chitosan nanoparticles (c-AgNPs), which are prepared by coating citrate-reduced AgNPs with a thin layer of chitosan averaging 10 nm. The chitosan thin film acts as porous layer and prevents the excess interactions of biological media secreted by bacteria. The two model bacteria, Escherichia coli and Staphylococcus cohnii, gram positive and gram negative, respectively, were chosen for the study. The SERS spectra were acquired directly from the growth culture by simply placing c-AgNPs substrate on the biofilm formed during the growth of the bacteria for in situ monitoring. It was found that c-AgNPs are effective SERS substrates to monitor molecular changes in the biofilm during the biofilm formation.