Light-matter interaction in van der Waals hetero-structures

Photoinduced edge-specific nanoparticle decoration of two-dimensional tungsten diselenide nanoribbons

Metallic nanoparticles are widely explored for boosting light-matter coupling, optoelectronic response, and improving photocatalytic performance of two-dimensional (2D) materials. However, the target area is restricted to either top or bottom of the 2D flakes. Here, we introduce an approach for edge-specific nanoparticle decoration via light-assisted reduction of silver ions and merging of silver seeds. We observe arrays of the self-limited in size silver nanoparticles along tungsten diselenide WSe2 nanoribbon edges. The density of nanoparticles is tunable by adjusting the laser fluence. Scanning electron microscopy, atomic force microscopy, and Raman spectroscopy are used to investigate the size, distribution, and photo-response of the deposited plasmonic nanoparticles on the quasi-one-dimensional nanoribbons. We report an on-surface synthesis path for creating mixed-dimensional heterostructures and heterojunctions with potential applications in opto-electronics, plasmonics, and catalysis, offering improved light matter coupling, optoelectronics response, and photocatalytic performance of 2D materials.

Abnormal Metal-Semiconductor-Like Transition and Exceptional Enhanced Superconducting State in Pressurized Restacked TaS2

Interlayer coupling and stacking order play essential roles in shaping the exotic electronic properties of two-dimensional materials. Here, we employ restacked TaS₂─a novel transition metal dichalcogenide (TMD) with weak vdW bonding and twisted angles─to investigate the strain effects of interlayer modulation on the electronic properties. Under pressure, an unexpected transition from metallic to semiconducting-like states occurs. Superconductivity coexists with the semiconducting-like state over a wide pressure range, which has never before been observed in TMDs. Upon further compression, a new superconducting SC-II state emerges without structural evolution and gradually replaces the initial SC-I state. The emerging SC-II state exhibits robust zero-resistance superconductivity and an ultrahigh upper critical field. The abundant electronic state changes in RS-TaS₂ are strongly related to band-structure engineering resulting from pressure-induced interlayer stacking angle modulation. Our results reveal the remarkable effect of interlayer rearrangement on electronic properties and provide a special way to explore the unique properties of 2D materials.

Graphene and Beyond: Recent Advances in Two-Dimensional Materials Synthesis, Properties, and Devices

Since the isolation of graphene in 2004, two-dimensional (2D) materials research has rapidly evolved into an entire subdiscipline in the physical sciences with a wide range of emergent applications. The unique 2D structure offers an open canvas to tailor and functionalize 2D materials through layer number, defects, morphology, moiré pattern, strain, and other control knobs. Through this review, we aim to highlight the most recent discoveries in the following topics: theory-guided synthesis for enhanced control of 2D morphologies, quality, yield, as well as insights toward novel 2D materials; defect engineering to control and understand the role of various defects, including in situ and ex situ methods; and properties and applications that are related to moiré engineering, strain engineering, and artificial intelligence. Finally, we also provide our perspective on the challenges and opportunities in this fascinating field.

Plasmon-enhanced Raman spectroscopy of two-dimensional semiconductors

Two-dimensional (2D) semiconductors have grown fast into an extraordinary research field due to their unique physical properties compared to other semiconducting materials. The class of materials proved extremely fertile for both fundamental studies and a wide range of applications from electronics/spintronics/optoelectronics to photocatalysis and CO₂reduction. 2D materials are highly confined in the out-of-plane direction and often possess very good environmental stability. Therefore, they have also become a popular material system for the manipulation of optoelectronic properties via numerous external parameters. Being a versatile characterization technique, Raman spectroscopy is used extensively to study and characterize various physical properties of 2D materials. However, weak signals and low spatial resolution hinder its application in more advanced systems where decoding local information plays an important role in advancing our understanding of these materials for nanotechnology applications. In this regard, plasmon-enhanced Raman spectroscopy has been introduced in recent time to investigate local heterogeneous information of 2D semiconductors. In this review, we summarize the recent progress of plasmon-enhanced Raman spectroscopy of 2D semiconductors. We discuss the current state-of-art and provide future perspectives on this specific branch of Raman spectroscopy applied to 2D semiconductors.

Theory of Excitons in Atomically Thin Semiconductors: Tight-Binding Approach

Atomically thin semiconductors from the transition metal dichalcogenide family are materials in which the optical response is dominated by strongly bound excitonic complexes. Here, we present a theory of excitons in two-dimensional semiconductors using a tight-binding model of the electronic structure. In the first part, we review extensive literature on 2D van der Waals materials, with particular focus on their optical response from both experimental and theoretical points of view. In the second part, we discuss our ab initio calculations of the electronic structure of MoS2, representative of a wide class of materials, and review our minimal tight-binding model, which reproduces low-energy physics around the Fermi level and, at the same time, allows for the understanding of their electronic structure. Next, we describe how electron-hole pair excitations from the mean-field-level ground state are constructed. The electron-electron interactions mix the electron-hole pair excitations, resulting in excitonic wave functions and energies obtained by solving the Bethe-Salpeter equation. This is enabled by the efficient computation of the Coulomb matrix elements optimized for two-dimensional crystals. Next, we discuss non-local screening in various geometries usually used in experiments. We conclude with a discussion of the fine structure and excited excitonic spectra. In particular, we discuss the effect of band nesting on the exciton fine structure; Coulomb interactions; and the topology of the wave functions, screening and dielectric environment. Finally, we follow by adding another layer and discuss excitons in heterostructures built from two-dimensional semiconductors.

Excitons in semiconductor moiré superlattices

Semiconductor moiré superlattices represent a rapidly developing area of engineered photonic materials and a new platform to explore correlated electron states and quantum simulation. In this Review, we briefly introduce early experiments that identified new exciton resonances in transition metal dichalcogenide heterobilayers and discuss several topics including two types of transition metal dichalcogenide moiré superlattice, new optical selection rules, early evidence of moiré excitons, and how the resonant energy, dynamics and diffusion properties of moiré excitons can be controlled via the twist angle. To interpret optical spectra, it is important to measure the energy modulation within a moiré supercell. In this context, we describe a few scanning tunnelling microscopy experiments that measure the moiré potential landscape directly. Finally, we review a few recent experiments that applied excitonic optical spectroscopy to probe correlated electron phenomena in transition metal dichalcogenide moiré superlattices.

Moiré superlattices and related moiré excitons in twisted van der Waals heterostructures

Recent advances in moiré superlattices and moiré excitons, such as quantum emission arrays, low-energy flat bands, and Mott insulators, have rapidly attracted attention in the fields of optoelectronics, materials, and energy research. The interlayer twist turns into a degree of freedom that alters the properties of the systems of materials, and the realization of moiré excitons also offers the feasibility of making artificial exciton crystals. Moreover, moiré excitons exhibit many exciting properties under the regulation of various external conditions, including spatial polarisation, alternating dipolar to alternating dipolar moments and gate-dependence to gate voltage dependence; all are pertinent to their applications in nano-photonics and quantum information. But the lag in theoretical development and the low-efficiency of processing technologies significantly limit the potential of moiré superlattice applications. In this review, we systematically summarise and discuss the recent progress in moiré superlattices and moiré excitons, and analyze the current challenges, and put forward relevant recommendations. There is no doubt that further research will lead to breakthroughs in their application and promote reforms and innovations in traditional solid-state physics and materials science.

Moiré excitons in MoSe2-WSe2 heterobilayers and heterotrilayers

Layered two-dimensional materials exhibit rich transport and optical phenomena in twisted or lattice-incommensurate heterostructures with spatial variations of interlayer hybridization arising from moiré interference effects. Here, we report experimental and theoretical studies of excitons in twisted heterobilayers and heterotrilayers of transition metal dichalcogenides. Using MoSe₂-WSe₂ stacks as representative realizations of twisted van der Waals bilayer and trilayer heterostructures, we observe contrasting optical signatures and interpret them in the theoretical framework of interlayer moiré excitons in different spin and valley configurations. We conclude that the photoluminescence of MoSe₂-WSe₂ heterobilayer is consistent with joint contributions from radiatively decaying valley-direct interlayer excitons and phonon-assisted emission from momentum-indirect reservoirs that reside in spatially distinct regions of moiré supercells, whereas the heterotrilayer emission is entirely due to momentum-dark interlayer excitons of hybrid-layer valleys. Our results highlight the profound role of interlayer hybridization for transition metal dichalcogenide heterostacks and other realizations of multi-layered semiconductor van der Waals heterostructures.

Tunable band alignment in boron carbon nitride and blue phosphorene van der Waals heterostructure

The hybrid monolayer of boron nitride and graphene, namely the BC x N monolayer, has been recently revealed as a direct bandgap semiconductor with exceptional thermal, mechanical and optical properties. The integration of such monolayer with other 2D materials into a van der Waals heterostructure (VDWH), however, remains largely unexplored thus far. In this work, we investigate the electronic and structural properties of a new class of VDWH obtained via the vertical stacking of BC x N (x = 2, 6) and blue phosphorene monolayers. By using first-principle density functional theory (DFT) simulation, we show that BC x N couples to the blue phosphorene layer via weak van der Waals interactions and exhibits a type-II band alignment which is beneficial for electron-hole pair separation in photodetection and solar cell applications. Intriguingly, changing the interlayer separation induces a indirect-to-direct band gap transition which changes the band alignment types of the VDWH. The interlayer separation, which can be readily tuned via a vertical strain, thus provides a useful tuning knob for switching the heterostructures between type-I and type-II VDWHs. Our findings reveals the BC x N-based VDWH as a versatile material platform with tunable band alignments, thus opening a route towards novel VDWH-based optoelectronic devices.