Effect of sulfur doping on fluorescence and quantum yield of graphene quantum dots: an experimental and theoretical investigation

Facile synthesis of sulfur quantum dots with red light emission: Implications for electrochemiluminescence analysis application

Sulfur quantum dots (SQDs) have been reported as a potential candidate due to their low toxicity and high luminescent performance. Here, SQDs with red light fluorescence (FL) emission were synthesized by a one-step hydrothermal method using Na2CO3 as an etching agent, using sublimed sulfur powder as a sulfur source, and using bovine serum albumin (BSA) as a stabilizer. The choice of etching agent (NaOH or Na2CO3) realized the tuning of SQDs' FL emission with blue and red light. The synthesized SQDs showed good FL stability and high FL efficiency, with a quantum yield of 1.03 % in an aqueous solution at 575 nm. In addition, stable and efficient electrochemiluminescence (ECL) emission was achieved by employing SQDs as ECL emitters with K2S2O8 as the co-reactant. The resorcinol (RS) can enhance the ECL intensity of the SQDs-K2S2O8 system, and the ECL intensity had a good linear relationship with the concentration of RS in a range from 2.5 nM to 25 nM with a detection limit of 0.61 nM. This work provides an emerging red-light luminescent SQDs, which would open up a way for the development of new types of luminophor in FL or ECL analysis. It also provides convenience for bio-labeling of live cells, in vivo imaging and provide new materials for photoelectric devices.

Selective dual sensing strategy for free and vitamin D3 micelles in food samples based on S,N-GQDs photoinduced electron transfer

A reliable nanotechnological sensing strategy, based on an S,N-co-doped graphene quantum dot (GQD) platform, has been developed to distinctly detect two key variants of vitamin D3, specifically the free (VD3) and the nanoencapsulated form (VD3Ms). For this purpose, food-grade vitamin D3 micelles were self-assembled using a low-energy procedure (droplet size: 49.6 nm, polydispersity index: 0.34, ζ-potential: -33 mV, encapsulation efficiency: 90 %) with an innovative surfactant mixture (Tween 60 and quillaja saponin). Herein, four fluorescent nanoprobes were also synthesized and thoroughly characterized: S,N-co-doped GQDs, α-cyclodextrin-GQDs, β-cyclodextrin-GQDs, and γ-cyclodextrin-GQDs. The goal was to achieve a selective dual sensing strategy for free VD3 and VD3Ms by exploiting their distinctive quenching behaviors. Thus, the four nanosensors allowed the individual sensing of both targets to be performed (except α-CD-GQD for VD3Ms), but S,N-GQDs were finally selected due to selectivity and sensitivity (quantum yield, QY= 0.76) criteria. This choice led to a photoinduced electron transfer (PET) mechanism associated with static quenching, where differentiation was evidenced through a displayed 13-nm hypsochromic (blue) shift when interacting with VD3Ms. The reliability of this dual approach was demonstrated through an extensive evaluation of analytical performance characteristics. The feasibility and accuracy were proven in commercial food preparations and nutritional supplements containing declared nanoencapsulated and raw VD3, whose results were validated by a paired Student's t-test comparison with a UV-Vis method. To the best of our knowledge, this represents the first non-destructive analytical approach addressing the groundbreaking foodomic trend to distinctly detect different bioactive forms of vitamin D3, while also preserving their native nanostructures as a chemical challenge, thus providing reliable information about their final stability and bioavailability.

MXene nanosheet-derived N, S-codoped graphene quantum dots for ultrasensitive and selective detection of 3-nitro-l-tyrosine in human serum

3-Nitro-l-tyrosine (3NT) is an oxidative stress metabolite associated with neurodegenerative diseases such as Parkinson's disease and rheumatoid arthritis. In this study, the N, S-co-doped graphene quantum dots (NSGQDs) derived from nitrogen-doped Ti3C2Tx MXene nanosheet via the hydrothermal method in the presence of mercaptosuccinic acid was synthesized as an optical sensing probe to detect 3NT in human serum. Tetramethyl ammonium hydroxide, the nitrogen source and delamination agent, was used to prepare nitrogen-doped MXene nanosheets via one step at room temperature. The as-prepared NSGQDs are uniform with an average size of 1.2 ± 0.6 nm, and can be stable in aqueous solution for at least 90 d to serve as the fluorescence probe. The N atoms in N-MXene reduce the restacking and aggregation of MXene nanosheets, while the sulfur dopant in NSGQDs increases the quantum yield from 6.2 to 12.1 % as well as enhances the selectivity of 3NT over the other 12 interferences via coordination interaction with nitro group in 3NT. A linear range of 0.02-150 μM in PBS and 0.05-200 μM in human serum with a recovery of 97-108 % for 3NT detection is observed. Moreover, the limit of detection can be lowered to 4.2 and 7 nM in PBS and 1 × diluted human serum, respectively. Results obtained clearly indicate the potential application of the N-Ti3C2Tx derived NSGQD for effective detection of 3NT, which can open a window for the synthesis of doped GQDs via 2D MXene materials for ultrasensitive and selective detection of other biometabolites and biomarkers of neurodegenerative diseases in biological fluids.

The future of plant based green carbon dots as cancer Nanomedicine: From current progress to future Perspectives and beyond

BACKGROUND

The emergence of carbon dots (CDs) as anticancer agents had sparked a transformation in cancer research and treatment strategies. These fluorescent CDs, initially introduced in the early 2000 s, possess exceptional biocompatibility, tunable fluorescence, and surface modification capabilities, positioning them as promising tools in biomedical applications.

AIM OF REVIEW

The review encapsulates the transformative trajectory of green CDs as future anticancer nanomedicine, poised to redefine the strategies employed in the ongoing fight against cancer.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The versatility of CDs was rooted in their various synthesis approaches and sustainable strategies, enabling their adaptability for diverse therapeutic uses. In vitro studies had showcased CDs' selective cytotoxicity against cancer cells while sparing healthy counterparts, forming the basis for targeted therapeutic potential. This selectivity had been attributed to the reactive oxygen species (ROS) generation, which opened avenues for targeted interventions. The role of CDs in combination therapies, synergizing with chemotherapy, radiotherapy, and targeted approaches was then investigated to heighten their anticancer efficacy. Notably, in vivo studies highlight CDs' remarkable biocompatibility and minimal side effects, endorsing their translational promise. Integration with conventional cancer treatments such as chemotherapy, radiotherapy, and immunotherapy amplified the versatility and effectiveness of CDs. The exploration of CDs' applications in photo-induced treatments further solidified their significance, positioning them as photosensitizers (PS) in photodynamic therapy (PDT) and photothermal agents (PA) in photothermal therapy (PTT). In PDT, CDs triggered the generation of ROS upon light exposure, facilitating cancer cell elimination, while in PTT, they induced localized hyperthermia within cancer cells, enhancing therapeutic outcomes. In vitro and in vivo investigations validated CDs' efficacy in PDT and PTT, affirming their potential for integration into combination therapies. Looking ahead, the future of CDs in anticancer treatment encompasses bioavailability, biocompatibility, synergistic treatments, tumor targeting, artificial intelligence (AI) and robotics integration, personalized medicine, and clinical translation. This transformative odyssey of CDs as future anticancer agents is poised to redefine the paradigm of cancer treatment strategies.

Fluorescent Graphitic Carbon Nitride (g-C3N4)-Embedded Hyaluronic Acid Microgel Composites for Bioimaging and Cancer-Cell Targetability as Viable Theragnostic

Fluorescent graphitic carbon nitride (g-C3N4) doped with various heteroatoms, such as B, P, and S, named Bg-C3N4, Pg-C3N4, and Sg-C3N4, were synthesized with variable band-gap values as diagnostic materials. Furthermore, they were embedded within hyaluronic acid (HA) microgels as g-C3N4@HA microgel composites. The g-C3N4@HA microgels had a 0.5-20 μm size range that is suitable for intravenous administration. Bare g-C3N4 showed excellent fluorescence ability with 360 nm excitation wavelength and 410-460 emission wavelengths for possible cell imaging application of g-C3N4@HA microgel composites as diagnostic agents. The g-C3N4@HA-based microgels were non-hemolytic, and no clotting effects on blood cells or cell toxicity on fibroblasts were observed at 1000 μg/mL concentration. In addition, approximately 70% cell viability for SKMEL-30 melanoma cells was seen with Sg-C3N4 and its HA microgel composites. The prepared g-C3N4@HA and Sg-C3N4@HA microgels were used in cell imaging because of their excellent penetration capability for healthy fibroblasts. Furthermore, g-C3N4-based materials did not interact with malignant cells, but their HA microgel composites had significant penetration capability linked to the binding function of HA with the cancerous cells. Flow cytometry analysis revealed that g-C3N4 and g-C3N4@HA microgel composites did not interfere with the viability of healthy fibroblast cells and provided fluorescence imaging without any staining while significantly decreasing the viability of cancerous cells. Overall, heteroatom-doped g-C3N4@HA microgel composites, especially Sg-C3N4@HA microgels, can be safely used as multifunctional theragnostic agents for both diagnostic as well as target and treatment purposes in cancer therapy because of their fluorescent nature.

Synthesis and Application of Carbon Quantum Dots Derived from Carbon Black in Bioimaging

Carbon quantum dots (CQDs) are a new type of fluorescent QDs that consists mainly of carbon atoms. In this research, CQDs were synthesized through harsh oxidizing conditions applied on carbon black and subsequent N-doping using hexamethylenetetramine (Hexamine) and polyethyleneimine (PEI). The synthesized CQDs were characterized using FTIR, AFM, UV-Visible spectroscopy, photoluminescence (PL) spectroscopy, and fluorescence imaging respectively. The AFM images showed that the dots are in the range of 2-8 nm. N-doping of the CQDs increased the PL intensity. The PL enhancement for the CQDs that were N-doped with PEI was higher compared to those N-doped with hexamine. The shift in PL by changing the excitation wavelength has been attributed to the nano-size of the CQDs, functional groups, defect traps, and quantum confinement effect. The in vitro fluorescence imaging revealed that N-doped CQDs can internalize into the cells and be used for fluorescent cell imaging.

Doping matters in carbon nanomaterial efficiency in environmental remediation

Carbon nanomaterials (CNMs) are rapidly emerging in materials science research due to their widespread environmental applications. They are useful for environmental pollutants' remediation through various methods. Heteroatom doping resulted in reliable approaches to overcome pristine CNMs challenges. The engineering of the dopants is believed to be a promising route to improve the efficiency of CNMs in environmental remediation. The idea of doping has been attractive since it allows the control of electronic properties due to the electron transfer between dopants and the host material and the dopants along with the bonding between analogous atoms and carbon atoms. This mini-review, through computational and experimental studies, puts special emphasis on the role of doping different CNMs as an efficient approach to enhance the environmental remediation.

From Pristine to Heteroatom-Doped Graphene Quantum Dots: An Essential Review and Prospects for Future Research

Graphene quantum dots (GQDs) are carbon-based zero-dimensional materials that have received considerable scientific interest due to their exceptional optical, electrical, and optoelectrical properties. Their unique electronic band structures, influenced by quantum confinement and edge effects, differentiate the physical and optical characteristics of GQDs from other carbon nanostructures. Additionally, GQDs can be synthesized using various top-down and bottom-up approaches, distinguishing them from other carbon nanomaterials. This review discusses recent advancements in GQD research, focusing on their synthesis and functionalization for potential applications. Particularly, various methods for synthesizing functionalized GQDs using different doping routes are comprehensively reviewed. Based on previous reports, current challenges and future directions for GQDs research are discussed in detail herein.

Red emitting carbon dots: surface modifications and bioapplications

Quantum dots (QDs), and carbon quantum dots (CDs) in particular, have received significant attention for their special characteristics. These particles, on the scale of several nanometers, are often produced using simple and green methods, with naturally occurring organic precursors. In addition to facile production methods, CDs present advantageous applications in the field of medicine, primarily for bioimaging, antibacterial and therapeutics. Also, CDs present great potential for surface modification through methods like doping or material mixing during synthesis. However, the bulk of current literature focuses on CDs emitting in the blue wavelengths which are not very suitable for biological applications. Red emitting CDs are therefore of additional interest due to their brightness, photostability, novelty and deeper tissue penetration. In this review article, red CDs, their methods of production, and their biological applications for translational research are explored in depth, with emphasis on the effects of surface modifications and doping.

Computational approaches to delivery of anticancer drugs with multidimensional nanomaterials

Functionalized nanotubes (NTs), nanosheets, nanorods, and porous organometallic scaffolds are potential in vivo carriers for cancer therapeutics. Precise delivery through these agents depends on factors like hydrophobicity, payload capacity, bulk/surface adsorption, orientation of molecules inside the host matrix, bonding, and nonbonding interactions. Herein, we summarize advances in simulation techniques, which are extremely valuable in initial geometry optimization and evaluation of the loading and unloading behavior of encapsulated drug molecules. Computational methods broadly involve the use of quantum and classical mechanics for studying the behavior of molecular properties. Combining theoretical processes with experimental techniques, such as X-ray crystallography, NMR spectroscopy, and bioassays, can provide a more comprehensive understanding of the structure and function of biological molecules. This integrated approach has led to numerous breakthroughs in drug discovery, enzyme design, and the study of complex biological processes. This short review provides an overview of results and challenges described from erstwhile investigations on the molecular interaction of anticancer drugs with nanocarriers of different aspect ratios.

Gold nanoparticles modified reduced graphene oxide nanosheets based dual-quencher for highly sensitive detection of carcinoembryonic antigen

In the current scenario, the dominance of cancer is becoming a disastrous threat to mankind. Therefore, an advanced analytical approach is desired as the need of the hour for early diagnosis to curb the menace of cancer. In this context, the present work reports the development of nano surface energy transfer (NSET) based fluorescent immunosensor for carcinoembryonic antigen (CEA) detection utilizing protein functionalized graphene quantum dots (anti-CEA/amine-GQDs) and a nanocomposite of nanostructured gold and reduced graphene oxide (AuNPs@rGO) as energy donor-acceptor pair, respectively. The obtained AuNPs@rGO nanocomposite has been characterized by different advanced analytical techniques. The functionality of the biosensor depends on quenching the fluorescence of anti-CEA/amine-GQDs donor species by AuNPs@rGO acceptor species, followed by the gradual recovery of GQDs' fluorescence after CEA addition. The efficient energy transfer kinetics have been envisaged by utilizing the AuNPs@rGO nanocomposite as a dual-quencher nanoprobe that revealed improved energy transfer and quenching efficiency (~62 %, 88 %) compared to AuNPs (~43 %, 81 %) as a single quencher. Further, the developed biosensing platform successfully detected CEA biomarker with notable biosensing parameters, including a wider linear detection range (0.001-500 ng mL^-1), fast response time (24 min), and a significantly low detection limit (0.35 pg mL^-1).

Probe sonication-assisted rapid synthesis of highly fluorescent sulfur quantum dots

A new type of heavy-metal free single-element nanomaterial, called sulfur quantum dots (SQDs), has gained significant attention due to its advantages over traditional semiconductor QDs for several biomedical and optoelectronic applications. A straightforward and rapid synthesis approach for preparing highly fluorescent SQDs is needed to utilize this nanomaterial for technological applications. Until now, only a few synthesis approaches have been reported; however, these approaches are associated with long reaction times and low quantum yields (QY). Herein, we propose a novel optimized strategy to synthesize SQDs using a mix of probe sonication and heating, which reduces the reaction time usually needed from 125 h to a mere 15 min. The investigation employs cavitation and vibration effects of high energy acoustic waves to break down the bulk sulfur into nano-sized particles in the presence of highly alkaline medium and oleic acid. In contrast to previous reports, the obtained SQDs exhibited excellent aqueous solubility, desirable photostability, and a relatively high photoluminescence QY up to 10.4% without the need of any post-treatment. Additionally, the as-synthesized SQDs show excitation-dependent emission and excellent stability in different pH (2-12) and temperature (20 °C-80 °C) environments. Hence, this strategy opens a new pathway for rapid synthesis of SQDs and may facilitate the use of these materials for biomedical and optoelectronic applications.

Competitive fluorescent immunoassay for the ultrasensitive determination of amyloid beta peptide1-42 based on Ag@SiO2@N, S-GQD nanocomposites

A competitive fluorescent immunoassay is described for the ultrasensitive determination of amyloid beta peptide1-42 (Aβ1-42), a biomarker for early diagnosis of Alzheimer's disease. N, S-doped graphene quantum dots (N, S-GQDs) were freely assembled on the surface of Ag@SiO₂ nanoparticles to obtain a composite (Ag@SiO₂@N, S-GQD nanocomposite), which was successfully prepared and characterized. By theoretical study, the optical properties of nanocomposites are improved compared with GQDs, due to the advantages of combining N, S co-doping and metal-enhanced fluorescence (MEF) effect of Ag NPs. In addition, Aβ1-42 was modified by Ag@SiO₂@N, S-GQDs to prepare a probe with high photoluminescence properties (Ag@SiO₂@N, S-GQDs-Aβ1-42). In the presence of Aβ1-42, a competitive reaction towards anti-Aβ1-42 fixed on the ELISA plate was proceeded between Aβ1-42 and Ag@SiO₂@N, S-GQDs-Aβ1-42 by specific capture of antigen-antibody. The emission peak of Ag@SiO₂@N, S-GQDs-Aβ1-42 (400 nm emission) was used for the quantitative determination of Aβ1-42. Under the optimal conditions, the fluorescent immunoassay exhibited a linear range of 0.32 pg·mL^-1-5 ng·mL^-1 with a detection limit of 0.098 pg·mL^-1. The results show that the immunoassay has good analytical ability and can provide a new method for the clinical determination of Aβ1-42.

Fluorescent "turn-on" aptamer sensor for sensitive and reliable detection of Golgi glycoprotein 73 based on nitrogen-doped graphene quantum dots and molybdenum disulfide nanosheets

The sensitivity and specificity of Golgi glycoprotein 73 (GP73) are very important for early diagnosis of hepatocellular carcinoma. Herein, we constructed a new-fashioned fluorescent aptamer sensor for GP73 determination based on nitrogen-doped graphene quantum dots (N-GQD_S) and molybdenum disulfide (MoS₂) nanosheets. N-GQDs with high fluorescence intensity and good stability were screened out, and GP73 aptamer (GP73_Apt) is labeled with N-GQDs to form the N-GQDs-GP73_Apt fluorescence probe. MoS₂ nanosheets can quench the fluorescence of N-GQDs-GP73_Apt owing to fluorescence resonance energy transfer mechanisms. After introducing GP73 into the biosensing system, the N-GQDs-GP73_Apt specifically bound with GP73 to form the deployable structures, making N-GQDs-GP73_Apt far away from MoS₂, blocking the fluorescence energy transfer process, and restoring the fluorescence of N-GQDs-GP73_Apt. When the GP73 concentration was in the extent of 2.5 ng/mL∼100 ng/mL, the relative fluorescence recovery is linearly relevant to the concentration of GP73, and the limit of detection (LOD) was 1.29 ng/mL (S/N = 3). Moreover in the application of actual serum sample detection, the recovery was range 98.85∼100.55 %. The fluorescent aptamer sensor can rapidly detect and analyze the serum marker GP73 with the characteristics of low-cost, high sensitivity, good specificity and recovery.

Construction of hydrophobic fire retardant coating on cotton fabric using a layer-by-layer spray coating method

Multifunctional cotton fabric was prepared through a two-step layer-by-layer spray coating method, where the first layer of the coating comprising chitosan and ammonium phytate provided fire retardancy, and the second one with PDMS-ZnO composite imparted hydrophobicity to the fabric. A molecular dynamics (MD) simulation study was carried out to calculate interfacial adhesion of different components of the coating, based on which the sequencing of the coating layers was determined and used to prepare coated samples. The coated fabric demonstrated a significant improvement in fire retardancy through an increase in LOI from 18 % in control to 30 %, a reduction in char length from 30 cm to 7 cm, and a decrease in peak and total heat release rate values by 75 % and 33 %, respectively. The hydrophobicity of coated fabric was tested via water drop test where coated sample maintained a contact angle of 148° for up to 120 s, while the control sample showed 0°.

Facile and scalable synthesis of un-doped, doped and co-doped graphene quantum dots: a comparative study on their impact for environmental applications

In recent years, graphene quantum dots (GQDs) received huge attention due to their unique properties and potential applicability in different area. Here, we report simple and facile method for the synthesis of GQDs and their functionalization by doping and co-doping using different heteroatom under the optimized conditions. The doping and co-doping of GQDs using boron and nitrogen have been confirmed by FTIR and TEM. The UV-visible and fluorescence techniques have been used to study the optical properties and stability of functionalized GQDs. Further, the screening for enhancement of quantum yields of all GQDs were performed with fluorescence and UV-visible spectra under the optimized conditions. The average QY was obtained as 16.0%, 83.6%, 18.2% and 29.6% for GQDs, B-GQDs, N-GQDs and B,N-GQDs, respectively. The sensor was used to determine paraoxon in water samples. The LOD was observed to be 1.0 × 10^-4 M with linearity range of 0.001 to 0.1 M. The RSD was calculated for the developed B,N-GQDs based sensor and observed to be 2.99% with the regression coefficient as 0.997. All the doped, co-doped and un-doped GQDs possess remarkable properties as a fluorescent probe.

Carbon Quantum Dots from Amino Acids Revisited: Survey of Renewable Precursors toward High Quantum-Yield Blue and Green Fluorescence

Carbon quantum dots (CQDs) were synthesized via a green, one-step hydrothermal method. As CQD precursors, nine amino acids of different structural descriptors (negatively/positively charged in water, polar, hydrophobic, sulfur-containing, and other/complex ones) were surveyed: Asp, Cys, Gly, His, Leu, Lys, Phe, Pro, and Ser. The reactions were performed in an autoclave in the presence of citric acid at 180 °C for 24 h and yielded core-shell CQDs. CQDs were comprehensively characterized by transmission electron microscopy, dynamic light scattering, Raman, UV/Vis, infrared, X-ray photoelectron spectroscopy, and fluorescence spectroscopy. At the excitation wavelength of λ_ex = 350 nm, Cys-, Phe-, Leu-, and Lys-based CQDs displayed the highest quantum yield blue fluorescence-90 ± 5, 90 ± 4, 87 ± 5, and 67 ± 3%, respectively-superior to the conventional fluorescent dyes. Strikingly, for Lys- and Phe-CQDs, dissimilar trends in the excitation-emission wavelength relationships were identified, that is, constantly strong red shifts versus excitation wavelength-independent emission. Cys- and Lys-CQDs were water-dispersible toward the narrow unimodal distribution of hydrodynamic diameters-0.6 and 2.5 nm, respectively. Additionally, Lys- and Cys-CQDs, with high absolute zeta potential values, formed stable aqueous colloids in a broad range of pH (2, 7, and 12). The results constitute important premises for water-based applications of CQDs, such as bioimaging or photocatalysis.

Highly sensitive and selective detection of dopamine with boron and sulfur co-doped graphene quantum dots

In this work, we report, the synthesis of Boron and Sulfur co-doped graphene quantum dots (BS-GQDs) and its applicability as a label-free fluorescence sensing probe for the highly sensitive and selective detection of dopamine (DA). Upon addition of DA, the fluorescence intensity of BS-GQDs were effectively quenched over a wide concentration range of DA (0–340 μM) with an ultra-low detection limit of 3.6 μM. The quenching mechanism involved photoinduced electron transfer process from BS-GQDs to dopamine-quinone, produced by the oxidization of DA under alkaline conditions. The proposed sensing mechanism was probed using a detailed study of UV–Vis absorbance, steady state and time resolved fluorescence spectroscopy. The high selectivity of the fluorescent sensor towards DA is established. Our study opens up the possibility of designing a low-cost biosensor which will be suitable for detecting DA in real samples.

Graphene quantum dots: A review on the effect of synthesis parameters and theranostic applications

The rising demand for early-stage diagnosis of diseases such as cancer, diabetes, neurodegenerative can be met with the development of materials offering high sensitivity and specificity. Graphene quantum dots (GQDs) have been investigated extensively for theranostic applications owing to their superior photostability and high aqueous dispersibility. These are attractive for a range of biomedical applications as their physicochemical and optoelectronic properties can be tuned precisely. However, many aspects of these properties remain to be explored. In the present review, we have discussed the effect of synthetic parameters upon their physicochemical characteristics relevant to bioimaging. We have highlighted the effect of particle properties upon sensing of biological molecules through 'turn-on' and 'turn-off' fluorescence and generation of electrochemical signals. After describing the effect of surface chemistry and solution pH on optical properties, an inclusive view on application of GQDs in drug delivery and radiation therapy has been given. Finally, a brief overview on their application in gene therapy has also been included.

Surface State Treatment of Carbon Dots Using Sulphur Dioxide Isotherm

Low toxicity carbon dots are combating the disadvantages of quantum dots. The carbon dots find their applications in many fields due to their versatile nature. Four different types of carbon dots are present, according to the way of manufacturing and application the type is chosen. The water-soluble characteristics of carbon dots help them be involved in biomedicine applications. The optical properties of the carbon dots find applications as drug delivery, biosensors, LED, etc. The properties like fluorescence, photoluminescence, and phosphorescence are found in the carbon dots. The carbon dots occupy the tiny spot that exhibits different optical properties on excitation. The carbon dots excitation is mainly due to surface states. The characterization of surface states is very complex. The surface states contain the core structure of carbon and oxygen functional groups on the surfaces. The anions and cations formed from functional groups on excitation will recombine themselves. The functional groups are usually carboxyl and hydroxyl groups. The Π-collaborative network of the electronic structure contains many quantization levels which help the carbon dots to produce different wavelengths adapting to different applications. Due to the interference of the structure of the carbon dots, the entire property will vary. Doping of heteroatom methods is employed to enhance the fluorescence, and photoluminescence property carried out. They used N, S, P, and B heteroatoms singly and in combination to doping carbon dots. Here, the paper proposes the sulphur dioxide adsorption technique to enhance the optical properties of the carbon dots. The proposed method shows 8.5% efficiency in relative fluorescence intensity and 8% efficiency in terms of photoluminescence intensity.

New bidental sulfur-doped graphene quantum dots modified with gold as a catalyst for hydrogen generation

Disadvantages of fossil fuels encourage researchers to develop clean combustion sources, in particular, H₂ due to the high potential energy and safe by-products. Herein, Au was deposited on S-doped graphene quantum dots to obtain a heterogeneous photocatalyst for the degradation of formic acid toward H₂ generation. Insertion of thiol groups on graphene quantum dots was carried out by self-condensation reaction of citric acid in the presence of Dimaval, as the thiol groups carrier. After the complexation of Au with the prepared S-doped graphene quantum dots, the catalytic activity of composite was evaluated in formic acid degradation to generate H₂ under visible light. Au@S-doped graphene quantum dots demonstrated superior catalytic activity with the turnover frequency up to 112 h^-1. The reaction enjoys significant benefits such as stability and recyclability of the catalyst, excellent reaction rate, and mild reaction conditions.

Ultrasensitive Detection of Fe3+ Ions Using Functionalized Graphene Quantum Dots Fabricated by a One-Step Pulsed Laser Ablation Process

With respect to the detection of Fe3+ ions, graphene quantum dots (GQDs) have limitations for commercialization owing to their high limit of detection (LOD). Here, we report a one-step pulsed laser ablation (PLA) process to fabricate amino-functionalized GQDs (FGQDs) for the efficient detection of Fe3+ using polypyrrole (PPy) both as a precursor (amine N) and as a surfactant and also using graphite as a carbon precursor. Using this method, the amine N groups were easily incorporated into the carbon network of the GQDs. Additionally, compared to pristine GQDs, FGQDs showed smaller particle sizes and narrower size distributions owing to the surface passivation effects of the PPy surfactant. Due to the synergistic effect of surface passivation and incorporation of amine N groups, FGQDs exhibited a sensitive response to Fe3+ ions in the concentration range of 500 nM to 50 μM, which is lower than the quality standards for Fe3+ ions (∼5.36 μM) as suggested by the World Health Organization (WHO). Furthermore, the processing time for synthesizing FGQDs by the PLA process was less than 30 min, thus allowing successful practical applications of GQDs in the sensing field.

Ti3C2-MXene decorated with nanostructured silver as a dual-energy acceptor for the fluorometric neuron specific enolase detection

Nanohybrids of two-dimensional (2D) layered materials have shown fascinating prospects towards the fabrication of highly efficient fluorescent immunosensor. In this context, a nanohybrid of ultrathin Ti₃C₂-MXene nanosheets and silver nanoparticles (Ag@Ti₃C₂-MXene) has been reported as a dual-energy acceptor for ultrahigh fluorescence quenching of protein-functionalized graphene quantum dots (anti-NSE/amino-GQDs). The Ti₃C₂-MXene nanosheets are decorated with silver nanoparticles (AgNPs) to obsolete the agglomeration and restacking through a one-pot direct reduction method wherein the 2D Ti₃C₂-MXene nanosheets acted both as a reducing agent and support matrix for AgNPs. The as-prepared nanohybrid is characterized by various techniques to analyze the optical, structural, compositional, and morphological parameters. The quenching efficiency and energy transfer capability between the anti-NSE/amino-GQDs (donor) and Ag@Ti₃C₂-MXene (acceptor) have been explored through steady state and time-resolved spectroscopic studies. Interestingly, the Ag@Ti₃C₂-MXene nanohybrid exhibits better quenching and energy transfer efficiencies in contrast to bare Ti₃C₂-MXene, AgNPs and previously reported AuNPs. Based on optimized donor-acceptor pair, a fluorescent turn-on biosensing system is constructed that revealed improved biosensing characteristics compared to Ti₃C₂-MXene, graphene and AuNPs for the detection of neuron-specific enolase (NSE), including higher sensitivity (∼771 mL ng^-1), broader linear detection range (0.0001-1500 ng mL^-1), better LOD (0.05 pg mL^-1), and faster response time (12 min). Besides, remarkable biosensing capability has been observed in serum samples, with fluorescence recovery of ∼98%.

Synthesis, Applications, and Prospects of Graphene Quantum Dots: A Comprehensive Review

Graphene quantum dot (GQD) is one of the youngest superstars of the carbon family. Since its emergence in 2008, GQD has attracted a great deal of attention due to its unique optoelectrical properties. Non-zero bandgap, the ability to accommodate functional groups and dopants, excellent dispersibility, highly tunable properties, and biocompatibility are among the most important characteristics of GQDs. To date, GQDs have displayed significant momentum in numerous fields such as energy devices, catalysis, sensing, photodynamic and photothermal therapy, drug delivery, and bioimaging. As this field is rapidly evolving, there is a strong need to identify the emerging challenges of GQDs in recent advances, mainly because some novel applications and numerous innovations on the ease of synthesis of GQDs are not systematically reviewed in earlier studies. This feature article provides a comparative and balanced discussion of recent advances in synthesis, properties, and applications of GQDs. Besides, current challenges and future prospects of these emerging carbon-based nanomaterials are also highlighted. The outlook provided in this review points out that the future of GQD research is boundless, particularly if upcoming studies focus on the ease of purification and eco-friendly synthesis along with improving the photoluminescence quantum yield and production yield of GQDs.

Quantum Confinement of Electron-Phonon Coupling in Graphene Quantum Dots

On the basis of first-principles calculations and the special displacement method, we demonstrate the quantum confinement scaling law of the phonon-induced gap renormalization of graphene quantum dots (GQDs). We employ zigzag-edged GQDs with hydrogen passivation and embedded in hexagonal boron nitride. Our calculations for GQDs in the sub-10 nm region reveal strong quantum confinement of the zero-point renormalization ranging from 20 to 250 meV. To obtain these values we introduce a correction to the Allen-Heine theory of temperature-dependent energy levels that arises from the phonon-induced splitting of 2-fold degenerate edge states. This correction amounts to more than 50% of the gap renormalization. We also present momentum-resolved spectral functions of GQDs, which are not reported in previous contributions. Our results lay the foundation to systematically engineer temperature-dependent electronic structures of GQDs for applications in solar cells, electronic transport, and quantum computing devices.

Highly Efficient Flower-Like Graphene Quantum Dots-Based Fuschin Photocatalyst for Selective NAD(P)H Cofactor Regeneration Under Solar Light Irradiation

To meet the energy demands artificial photosynthesis is playing the most promising role these days. Using sunlight directly in a manner that can provide useful chemicals is a sustainable means of generating energy. Studies are going on in this context to make better and effective photocatalyst. In this paper, we study the synthesis of flower-like graphene quantum dots-based fuschin (GQDF) photocatalyst from lemon_, which is created by a green and sustainable process that is effective and environment friendly. The UV-visible spectra of prepared GQDF showed a high molar extinction coefficient. A flower-like GQDF photocatalyst has better catalytic efficiency for the selective creation and regeneration of the NAD(P)H cofactor. A newly designed flower-like GQDF photocatalyst is used as one of its most effective photocatalysts as they have several additional applications in the removal of CO₂ and aqueous contaminants like heavy metals.

Graphene Quantum Dots-Based Nanocomposites Applied in Electrochemical Sensors: A Recent Survey

Graphene quantum dots (GQDs) have been widely investigated in recent years due to their outstanding physicochemical properties. Their remarkable characteristics allied to their capability of being easily synthesized and combined with other materials have allowed their use as electrochemical sensing platforms. In this work, we survey recent applications of GQDs-based nanocomposites in electrochemical sensors and biosensors. Firstly, the main characteristics and synthesis methods of GQDs are addressed. Next, the strategies generally used to obtain the GQDs nanocomposites are discussed. Emphasis is given on the applications of GQDs combined with distinct 0D, 1D, 2D nanomaterials, metal-organic frameworks (MOFs), molecularly imprinted polymers (MIPs), ionic liquids, as well as other types of materials, in varied electrochemical sensors and biosensors for detecting analytes of environmental, medical, and agricultural interest. We also discuss the current trends and challenges towards real applications of GQDs in electrochemical sensors.

Theoretical Understanding of Structure-Property Relationships in Luminescence of Carbon Dots

Carbon dots (CDs) have excellent luminescence characteristics, such as good light stability, high quantum yield (QY), long phosphorescence lifetime, and a wide emission wavelength range, resulting in CDs' great success in optical applications. Understanding the structure-property relationships in CDs is essential for their use in optoelectronic applications. However, because of the complex nature of CD structures and synthesis processes, understanding the luminescence mechanism and structure-property relationships of CDs is a big challenge. This Perspective reviews the theoretical efforts toward the understanding of structure-property relationships and discusses the challenges that need to be overcome in future development of CDs.

Allium sativum derived carbon dots as a potential theranostic agent to combat the COVID-19 crisis

Coronavirus disease 2019 (COVID-19) is one of the worst pandemics to have hit the humanity. The manifestations are quite varied, ranging from severe lung infections to being asymptomatic. Hence, there is an urgent need to champion new tools to accelerate the end of this pandemic. Compromised immunity is a primary feature of COVID-19. Allium sativum (AS) is an effective dietary supplement known for its immune-modulatory, antibacterial, anti-inflammatory, anticancer, antifungal, and anti-viral properties. In this paper, it is hypothesized that carbon dots (CDs) derived from AS (AS-CDs) may possess the potential to downregulate the expression of pro-inflammatory cytokines and revert the immunological aberrations to normal in case of COVID-19. CDs have already been explored in the world of nanobiomedicine as a promising theranostic candidates for bioimaging and drug/gene delivery. The antifibrotic and antioxidant effects of AS are elaborated, as demonstrated in several studies. It is found that the most active constituent of AS, allicin has a highly potent antioxidant and reactive oxygen species (ROS) scavenging effect. The antibacterial, antifungal, and anti-viral effects along with their capability of negating inflammatory effects and cytokine storm are discussed. The synthesis of theranostic CDs from AS may provide a novel weapon in the therapeutic armamentarium for the management of COVID-19 infection and, at the same time, could act as a diagnostic agent for COVID-19.

One-step synthesis of sulfur-incorporated graphene quantum dots using pulsed laser ablation for enhancing optical properties

To tune the electronic and optoelectronic properties of graphene quantum dots (GQDs), heteroatom doping (e.g., nitrogen (N), boron (B), and sulfur (S)) is an effective method. However, it is difficult to incorporate S into the carbon framework of GQDs because the atomic size of S is much larger than that of C atoms, compared to N and B. In this study, we report a simple and one-step method for the synthesis of sulfur-doped GQDs (S-GQDs) via the pulsed laser ablation in liquid (PLAL) process. The as-prepared S-GQDs exhibited enhanced fluorescence quantum yields (0.8% → 3.89%) with a huge improved absorption band in ultraviolet (UV) region (200 ∼ 400 nm) and excellent photo stability under the UV radiation at 360 nm. In addition, XPS results revealed that the PLAL process can effectively facilitate the incorporation of S into the carbon framework compared to those produced by the chemical exfoliation method (e.g., hydrothermal method). And also, the mechanisms related with the optical properties of S-GQDs was investigated by time-resolved photoluminescence (TRPL) spectroscopy. We believe that the PLAL process proposed in this study will serve as a simple and one-step route for designing S-GQDs and opens up to opportunities for their potential applications.

Targeted bioimaging and sensing of folate receptor-positive cancer cells using folic acid-conjugated sulfur-doped graphene quantum dots

For the first time is reported a facile in situ synthesis of folic acid-conjugated sulfur-doped graphene quantum dots (FA-SGQDs) through simple pyrolysis of citric acid (CA), 3-mercaptopropionic acid (MPA), and FA. The as-prepared FA-SGQDs were extensively characterized to confirm the synthesis and incidence of FA molecule on the surface of SGQDs through advanced characterization techniques. Upon excitation at 370-nm wavelength, FA-SGQDs exhibited blue fluorescence with an emission band at 455 nm. While exhibiting relatively high quantum yield (~ 78%), favorable biocompatibility, excellent photostability, and desirable optical properties, the FA-SGQDs showed suitability as a fluorescent nanoprobe to distinguish the folate receptor (FR)-positive and FR-negative cancer cells. The experimental studies revealed that FA-SGQDs aptly entered into FR-positive cancer cells via a non-immunogenic FR-mediated endocytosis process. Additionally, the FA-SGQDs exhibited excellent free radical scavenging activity. Hence, these FA-SGQDs hold high promise to serve as efficient fluorescent nanoprobes for the pre-diagnosis of cancer through targeted bioimaging and other pertinent biological studies. Graphical abstract.

Synthesis, characterization and investigation of synergistic antibacterial activity and cell viability of silver-sulfur doped graphene quantum dot (Ag@S-GQDs) nanocomposites

The excessive use of traditional antibiotic and antibacterial agents has globally increased the growth of antibiotic-resistant bacteria that poses serious health risks. Therefore, the development of new generation antibacterial or antimicrobial agents for effective inhibition of bacterial growth is highly desired. In this study, we report a facile one-step synthesis approach for the preparation of a nanocomposite composed of silver nanoparticles (AgNPs) decorated with sulfur-doped graphene quantum dots (S-GQDs). The nanocomposite was comprehensively characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), UV-vis absorption spectra, Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The characterization results demonstrated that the AgNPs were closely and uniformly surrounded by the S-GQDs, and consequently, this ensured the dispersion and stability of the so formed nanocomposite (Ag@S-GQDs). Further, the antibacterial activity of the Ag@S-GQDs nanocomposite was investigated and compared with bare S-GQDs and AgNPs against Gram-positive S. aureus (MTCC 737) and Gram-negative P. aeruginosa (MTCC 424) bacteria using macrodilution and agar well diffusion methods. Minimum inhibitory concentration (MIC) values of 70 and 35 μg mL^-1 of the Ag@S-GQDs nanocomposite were found to be sufficient to hinder the growth of P. aeruginosa and S. aureus. A fractional inhibition concentration (FIC) index below 0.5 confirmed the existence of a synergistic effect between AgNPs and S-GQDs in the Ag@S-GQDs nanocomposite. In addition, the cytotoxicity of the Ag@S-GQDs nanocomposite, AgNPs and S-GQDs was also investigated using HEK 293 cell lines. Interestingly, the Ag@S-GQDs nanocomposite exhibited superior cell viability as compared to AgNPs and S-GQDs. These improved antibacterial and biocompatibility data demonstrate that the Ag@S-GQDs nanocomposite can serve as a promising antibacterial agent for industry to fabricate next-generation self-sterile textiles, antibacterial coatings and useful health care products supporting cell viability.

A highly sensitive and selective detection of picric acid using fluorescent sulfur-doped graphene quantum dots

The development of an analytical probe to monitor highly mutagenic picric acid (PA) carries enormous significance for the environment and for health. A novel, simple and rapid fluorescence analytical assay using sulfur-doped graphene quantum dots (SGQDs) was designed for the highly sensitive and selective detection of PA. SGQDs were synthesized via simple pyrolysis of 3-mercaptopropionic acid and citric acid and characterized using advanced analytical techniques. Fluorescence intensity (FI) of SGQDs was markedly quenched by addition of PA, attributed to the inner filter effect and dominating static quenching mechanism between the two, in addition to a significant colour change. The calibration curve of the proposed assay exhibited a favourable linearity between quenched FI and PA concentration over the 0.1-100 μΜ range with a lowest detection limit of 0.093 μΜ and a correlation coefficient of 0.9967. The analytical assay was investigated for detection of trace amounts of PA in pond and rain water samples and showed great potential for practical applications with both acceptable recovery (98.0-100.8%) and relative standard deviation (1.24-4.67%). Analytical performance of the assay in terms of its detection limit, linearity range, and recovery exhibited reasonable superiority over previously reported methods, thereby holding enormous promise as a simple, sensitive, and selective method for detection of PA.