Advanced biomedical applications of iron oxide nanostructures based ferrofluids

Efficient delivery of anticancer drugs using functionalized-Ag-decorated Fe3O4@SiO2 nanocarrier with folic acid and β-cyclodextrin

Nanocarrier surface functionalization has been widely regarded as a promising approach for achieving precise and targeted drug delivery systems. In this work, the fabrication of functionalized-Ag-decorated Fe3O4@SiO2 (Fe3O4@SiO2-Ag) nanocarriers with folic acid (FA) and β-cyclodextrin (BCD) exhibit a remarkable capacity for delivering two types of anticancer drugs, i.e., doxorubicin (DOX) and epirubicin (EPI), into cancer cells. The effective functionalization of Fe3O4@SiO2-Ag nanoparticles has been achieved through the use of cysteine (Cys) as an anchor for attaching FA and BCD via EDC-NHS coupling and Steglich esterification methods, respectively. The findings indicate that surface functionalization had no significant impact on the physicochemical characteristics of the nanoparticles. However, it notably affected DOX and EPI loading and release efficiency. The electrostatic conjugation of DOX/EPI onto the surface of Fe3O4@SiO2-Ag/Cys/FA and Fe3O4@SiO2-Ag/Cys/BCD exhibited maximum loading efficiency of 50-60% at concentration ratio of DOX/EPI to nanoparticles of 1:14. These nanocarriers also achieved an 40-47% DOX/EPI release over 36 days. Furthermore, the drug-loaded functionalized-nanocarrier showed cytotoxic effects on SK-MEL-2 cells, as demonstrated by an in vitro MTT assay. This suggests that the as-prepared functionalized-nanoparticles have promise as a carrier for the efficient anticancer drugs.

Investigating the transport and colloidal behavior of Fe3O4 nanoparticles in aqueous and porous media under varying solution chemistry parameters

The possible adverse effects of engineered iron oxide nanoparticles, especially magnetite (Fe3O4 NP), on human health and the environment, have raised concerns about their transport and behavior in soil and water systems. Accumulating these NPs in the environment can substantially affect soil and water quality and the well-being of aquatic and terrestrial organisms. Therefore, it is essential to examine the factors that affect Fe3O4 NP transportation and behavior in soil and water systems to determine their possible environmental fate. In this work, experiments were conducted in aqueous and porous media using an environmentally relevant range of pH (5, 7, 9), ionic strength (IS) (10, 50, 100 mM), and humic acid (HA) (0.1, 1, 10 mg L-1) concentrations. Fe3O4 NPs exhibited severe colloidal instability at pH 7 (⁓ = pHPZC) and showed an improvement in apparent colloidal stability at pH 5 and 9 in aquatic and terrestrial environments. HA in the background solutions promoted the overall transport of Fe3O4 NPs by enhancing the colloidal stability. The increased ionic strength in aqueous media hindered the transport by electron double-layer compression and electrostatic repulsion; however, in porous media, the transport was hindered by ionic compression. Furthermore, the transport behavior of Fe3O4 NPs was investigated in different natural waters such as rivers, lakes, taps, and groundwater. The interaction energy pattern in aquatic systems was estimated using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. This study showed the effects of various physical-chemical conditions on Fe3O4 NP transport in aqueous and porous (sand) media.

Synthesis of activated biochar from sustainable bamboo resources: An environment-friendly and low-cost solution for palladium (II) removal from wastewater

This article highlights the developing capabilities of low-cost activated biochar from bamboo waste used for Palladium (II) (Pd(II)) separation from man-made electroless plating solutions (ELP). From a novelty perspective, this article addresses the effect of coupled sonication and surfactant for the adsorptive elimination of Pd(II) on Bamboo stem activated carbon (BSAC) from ELP. The optimal activation procedure referred to an acid-to-bamboo ratio of 4:1 at sintering of 600-900 °C, which provided an activated carbon (AC) adsorbent with surface area analysis (BET) of 1014.36 m2/g, a value comparable to the commercially procured AC. Pd(II) adsorption characteristics in the solution of Pd with 50-500 mg/L concentration range were evaluated utilizing both agitation and sonication. Adsorption time, pH, dose, and adsorbate concentration were among the pertinent optimal batch adsorption parameters that were found. When utilizing ELP solutions without surfactant, the proposed adsorbent for agitation-assisted adsorption had a simultaneous improvement in metal intake of 6.68-43.2 mg/g and removal efficiency of 72.96-54.5% (cTAB). For cTAB-containing solutions, sonication and agitation-assisted adsorption were outperformed in terms of removal efficiency of 80.32-60.16% and metal uptake of 6.69-50.13 mg/g. Equilibrium, kinetic, and thermodynamic models with good fitting to the reported Pd(II) adsorption properties have been developed.

Dynamic susceptibility of soft ferrogels. Effect of interparticle interaction

We present the results of theoretical analysis of the dynamic susceptibility of soft elastic-viscous ferrogels with embedded single-domain ferromagnetic particles chaotically distributed in the host medium. The magnetic anisotropy of the particle is supposed to be strong. The effect of magnetic interparticle interaction is a focus of our attention. A differential equation for the statistically averaged (measured) magnetic moment of the particle is derived. Our analysis shows that in the case of a weak applied field, the interparticle interaction increases the composite magnetization and decreases the rate of its remagnetization.

Using SMART Magnetic Fluids and Gels for Prevention and Destruction of Bacterial Biofilms

Biofouling is a major problem in all natural and artificial settings where solid surfaces meet liquids in the presence of living microorganisms. Microbes attach to the surface and form a multidimensional slime that protects them from unfavorable environments. These structures, known as biofilms, are detrimental and very hard to remove. Here, we used SMART magnetic fluids [ferrofluids (FFs), magnetorheological fluids (MRFs), and ferrogels (FGs) containing iron oxide nano/microparticles] and magnetic fields to remove bacterial biofilms from culture tubes, glass slides, multiwell plates, flow cells, and catheters. We compared the ability of different SMART fluids to remove biofilms and found that commercially available, as well as homemade, FFs, MRFs, and FGs can successfully remove biofilm more efficiently than traditional mechanical methods, especially from textured surfaces. In tested conditions, SMARTFs reduced bacterial biofilms by five orders of magnitude. The ability to remove biofilm increased with the amount of magnetic particles; therefore, MRFs, FG, and homemade FFs with high amounts of iron oxide were the most efficient. We showed also that SMART fluid deposition can protect a surface from bacterial attachment and biofilm formation. Possible applications of these technologies are discussed.

Natural components as surface engineering agents for CRISPR delivery

This perspective article discusses the potential of using natural and environmentally friendly components as surface engineering agents for CRISPR delivery. Traditional delivery methods for CRISPR components have limitations and safety concerns, and surface engineering has emerged as a promising approach. The perspective provides an overview of current research, including the use of lipids, proteins, natural components (like leaf extracts), and polysaccharides to modify the surface of nanoparticles and improve delivery efficiency. The advantages of using natural components include biocompatibility, biodegradability, engineered functionality, cost-effectiveness, and environmental friendliness. The author also discusses the challenges and future perspective of this field, such as a better understanding of underlying mechanisms and optimization of delivery methods for different cell types and tissues, as well as the generation of novel inorganic nanomaterials, including MOF and MXene, for CRISPR delivery, and their synergistic potentials using leaf extracts and natural components. The use of natural components as surface engineering agents for CRISPR delivery has the potential to overcome the limitations of traditional delivery methods, eliminating the biological challenges, and represents a promising area of research.

Modified magnetic chitosan materials for heavy metal adsorption: a review

Magnetic chitosan materials have the characteristics of both chitosan and magnetic particle nuclei, showing the characteristics of easy separation and recovery, strong adsorption capacity and high mechanical strength, and have received extensive attention in adsorption, especially in the treatment of heavy metal ions. In order to further improve its performance, many studies have modified magnetic chitosan materials. This review discusses the strategies for the preparation of magnetic chitosan using coprecipitation, crosslinking, and other methods in detail. Besides, this review mainly summarizes the application of modified magnetic chitosan materials in the removal of heavy metal ions in wastewater in recent years. Finally, this review also discusses the adsorption mechanism, and puts forward the prospect of the future development of magnetic chitosan in wastewater treatment.

Iron Oxide Nanoparticle-Based Ferro-Nanofluids for Advanced Technological Applications

Iron oxide nanoparticle (ION)-based ferro-nanofluids (FNs) have been used for different technological applications owing to their excellent magneto-rheological properties. A comprehensive overview of the current advancement of FNs based on IONs for various engineering applications is unquestionably necessary. Hence, in this review article, various important advanced technological applications of ION-based FNs concerning different engineering fields are critically summarized. The chemical engineering applications are mainly focused on mass transfer processes. Similarly, the electrical and electronics engineering applications are mainly focused on magnetic field sensors, FN-based temperature sensors and tilt sensors, microelectromechanical systems (MEMS) and on-chip components, actuators, and cooling for electronic devices and photovoltaic thermal systems. On the other hand, environmental engineering applications encompass water and air purification. Moreover, mechanical engineering or magneto-rheological applications include dampers and sealings. This review article provides up-to-date information related to the technological advancements and emerging trends in ION-based FN research concerning various engineering fields, as well as discusses the challenges and future perspectives.

Mössbauer Spectroscopy with a High Velocity Resolution in the Studies of Nanomaterials

The present review describes our long experience in the application of Mössbauer spectroscopy with a high velocity resolution (a high discretization of the velocity reference signal) in the studies of various nanosized and nanostructured iron-containing materials. The results reviewed discuss investigations of: (I) nanosized iron cores in: (i) extracted ferritin, (ii) ferritin in liver and spleen tissues in normal and pathological cases, (iii) ferritin in bacteria, (iv) pharmaceutical ferritin analogues; (II) nanoparticles developed for magnetic fluids for medical purposes; (III) nanoparticles and nanostructured FINEMET alloys developed for technical purposes. The results obtained demonstrate that the high velocity resolution Mössbauer spectroscopy permits to excavate more information and to extract more spectral components in the complex Mössbauer spectra with overlapped components, in comparison with those obtained by using conventional Mössbauer spectroscopy. This review also shows the advances of Mössbauer spectroscopy with a high velocity resolution in the study of various iron-based nanosized and nanostructured materials since 2005.

Facile Fabrication of CuO Nanoparticles Embedded in N-Doped Carbon Nanostructure for Electrochemical Sensing of Dopamine

In the present study, a highly selective and sensitive electrochemical sensing platform for the detection of dopamine was developed with CuO nanoparticles embedded in N-doped carbon nanostructure (CuO@NDC). The successfully fabricated nanostructures were characterized by standard instrumentation techniques. The fabricated CuO@NDC nanostructures were used for the development of dopamine electrochemical sensor. The reaction mechanism of a dopamine on the electrode surface is a three-electron three-proton process. The proposed sensor's performance was shown to be superior to several recently reported investigations. Under optimized conditions, the linear equation for detecting dopamine by differential pulse voltammetry is I_pa (μA) = 0.07701 c (μM) − 0.1232 (R² = 0.996), and the linear range is 5-75 μM. The limit of detection (LOD) and sensitivity were calculated as 0.868 μM and 421.1 μA/μM, respectively. The sensor has simple preparation, low cost, high sensitivity, good stability, and good reproducibility.

Solid Fe Resources Separated from Rolling Oil Sludge for CO Oxidation

The efficient recycling of valuable resources from rolling oil sludge (ROS) to gain new uses remains a formidable challenge. In this study, we reported the recycling of solid Fe resources from ROS by a catalytic hydrogenation technique and its catalytic performance for CO oxidation. The solid Fe resources, after calcination in air (Fe2O3-H), exhibited comparable activity to those prepared by the calcinations of ferric nitrate (Fe2O3-C), suggesting that the solid resources have excellent recycling value when used as raw materials for CO oxidation catalyst preparation. Further studies to improve the catalytic performance by supporting the materials on high surface area 13X zeolite and by pretreating the materials with CO atmosphere, showed that the CO pretreatment greatly improved the CO oxidation activity and the best activity was achieved on the 20 wt.%Fe2O3-H/13X sample with complete CO conversion at 250 °C. CO pretreatment could produce more oxygen vacancies, facilitating O2 activation, and thus accelerate the CO oxidation reaction rate. The excellent reducibility and sufficient O2 adsorption amount were also favorable for its performance. The recycling of solid Fe resources from ROS is quite promising for CO oxidation applications.

Approaches on Ferrofluid Synthesis and Applications: Current Status and Future Perspectives

Ferrofluids are colloidal suspensions of iron oxide nanoparticles (IONPs) within aqueous or nonaqueous liquids that exhibit strong magnetic properties. These magnetic properties allow ferrofluids to be manipulated and controlled when exposed to magnetic fields. This review aims to provide the current scope and research opportunities regarding the methods of synthesis of nanoparticles, surfactants, and carrier liquids for ferrofluid production, along with the rheology and applications of ferrofluids within the fields of medicine, water treatment, and mechanical engineering. A ferrofluid is composed of IONPs, a surfactant that coats the magnetic IONPs to prevent agglomeration, and a carrier liquid that suspends the IONPs. Coprecipitation and thermal decomposition are the main methods used for the synthesis of IONPs. Despite the fact that thermal decomposition provides precise control on the nanoparticle size, coprecipitation is the most used method, even when the oxidation of iron can occur. This oxidation alters the ratio of maghemite/magnetite, influencing the magnetic properties of ferrofluids. Strategies to overcome iron oxidation have been proposed, such as the use of an inert atmosphere, adjusting the Fe(II) and Fe(III) ratio to 1:2, and the exploration of other metals with the oxidation state +2. Surfactants and carrier liquids are chosen according to the ferrofluid application to ensure stability. Hence, a compatible carrier liquid (polar or nonpolar) is selected, and then, a surfactant, mainly a polymer, is embedded in the IONPs, providing a steric barrier. Due to the variety of surfactants and carrier liquids, the rheological properties of ferrofluids are an important response variable evaluated when synthesizing ferrofluids. There are many reported applications of ferrofluids, including biosensing, medical imaging, medicinal therapy, magnetic nanoemulsions, and magnetic impedance. Other applications include water treatment, energy harvesting and transfer, and vibration control. To progress from synthesis to applications, research is still ongoing to ensure control of the ferrofluids' properties.