The formation pathways of aqueous hydrogen peroxide in a plasma-liquid system with liquid as the cathode

A rapid prototyped atmospheric non-thermal plasma-activated aerosol device and anti-bacterial characterisation

Non-plasma technologies are being extensively investigated for their potential to mitigate microbial growth through the production of various reactive species. Predominantly, studies utilise atmospheric non-thermal plasma to produce plasma-activated liquids. The advancement of plasma-liquid applications has led to the investigation of plasma-activated aerosols (PAAs). This study aimed to produce a rapid-prototyped plasma-activated aerosol setup and perform chemical and anti-bacterial characterisation on the resultant activated aerosols. The setup was produced using stereolithography 3D printing, and air was used as the carrier gas. The novel design of the device allowed for the direct production of PAAs without the prior generation of plasma-activated water and subsequent aerosolisation. The generated PAAs were assessed for nitrite, hydrogen peroxide and ozone content using colourimetric assays. Anti-bacterial efficacy was tested against three human pathogenic strains: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella enterica. It was observed that nitrite and ozone contact concentration increased with exposure time, yet no hydrogen peroxide was detected. The generated PAAs showed significant zones of no growth for all bacterial strains. These devices, therefore, show potential to be used as anti-bacterial disinfection technologies.

Influence of MHz-order acoustic waves on bacterial suspensions

The development of alternative techniques to efficiently inactivate bacterial suspensions is crucial to prevent transmission of waterborne illness, particularly when commonly used techniques such as heating, filtration, chlorination, or ultraviolet treatment are not practical or feasible. We examine the effect of MHz-order acoustic wave irradiation in the form of surface acoustic waves (SAWs) on Gram-positive (Escherichia coli) and Gram-negative (Brevibacillus borstelensis and Staphylococcus aureus) bacteria suspended in water droplets. A significant increase in the relative bacterial load reduction of colony-forming units (up to 74%) can be achieved by either increasing (1) the excitation power, or, (2) the acoustic treatment duration, which we attributed to the effect of the acoustic radiation force exerted on the bacteria. Consequently, by increasing the maximum pressure amplitude via a hybrid modulation scheme involving a combination of amplitude and pulse-width modulation, we observe that the bacterial inactivation efficiency can be further increased by approximately 14%. By combining this scalable acoustic-based bacterial inactivation platform with plasma-activated water, a 100% reduction in E. coli is observed in less than 10 mins, therefore demonstrating the potential of the synergistic effects of MHz-order acoustic irradiation and plasma-activated water as an efficient strategy for water decontamination.

Rapid Synthesis of Noble Metal Colloids by Plasma-Liquid Interactions

The interactions between plasma and liquids cause complex physical and chemical reactions at the gas-liquid contact surface, producing numerous chemically active particles that can rapidly reduce noble metal ions. This study uses atmospheric-pressure surface dielectric barrier discharge (DBD) plasma to treat ethanol aqueous solutions containing noble metal precursors, and stable gold, platinum, and palladium colloids are obtained within a few minutes. To evaluate the mechanism of the reduction of noble metal precursors by atmospheric-pressure surface DBD plasma, the corresponding metal colloids are prepared first by activating an ethanol aqueous solution with plasma and then adding noble metal precursors. It is found that the long-lived active species hydrogen peroxide (H2O2) plays a dominant role in the synthesis process, which has distinct effects on different metal ions. When HAuCl4 and H2PdCl4 are used as precursors, H2O2 acts as a reducing agent, and AuCl4- and PdCl42- ions can be reduced to metallic Au and Pd. However, when AgNO3 is the precursor, H2O2 acts as an oxidising agent, and Ag+ ions cannot be reduced to obtain metal colloids because metallic Ag can be dissolved in H2O2 under acidic conditions. A similar phenomenon was also observed for the preparation of Pd colloid-PA with a plasma-activated ethanol aqueous solution using Pd(NO3)2 as a Pd precursor.

Dielectric Barrier Discharge Plasma-Assisted Preparation of Chitosan-Based Hydrogels

Chitosan is widely used in the production of various hydrogels due to its non-biological toxicity, good biocompatibility, and strong biodegradability. However, chitosan-based hydrogels have not been widely used in tissue engineering due to their poor mechanical strength, poor stability and high biotoxicity of cross-linking agents. As a green technology, low temperature plasma is rich in active groups that can be involved in various chemical reactions, such as replacing the components on the chitosan chain, contributing to the cross-linking of chitosan. In this study, a plasma-assisted preparation method of chitosan-based hydrogels was developed and the properties, including mechanics, water absorption, and degradation (or stability), were characterized and analyzed. It is proved that plasma treatment plays a significant role in improving the mechanical strength and stability of hydrogels.

Chemical scanning of atomic oxygen at the gas-liquid interface of a NaCl solution via quantum mechanics/molecular mechanics molecular dynamics simulations

Atmospheric pressure plasmas can serve as double phase reactors to produce plasma activated water for water treatment. However, the physical-chemical processes involving plasma-supplied atomic oxygen and reactive oxygen species in an aqueous solution remain unclear. In this work, quantum mechanics (QM)/molecular mechanics (MM) molecular dynamics simulations (MDs) have been performed to directly observe the chemical reactions occurring between atomic oxygen and a NaCl solution at the gas-liquid interface using a model containing 10,800 atoms. During simulations, the atoms in the QM and MM Parts are dynamically adjusted. To examine the effects of local microenvironments on the chemical processes, atomic oxygen is used as a chemical probe to scan the gas-liquid interface. The excited atomic oxygen reacts with water molecules and Cl- ions to produce H2O2, OH, HOCl, ClO-, and HO2-/H3O+ species. The ground-state atomic oxygen is significantly more stable than the excited atomic oxygen, although it can react with water molecules to produce OH radicals. However, the branch ratio of ClO- computed for triplet atomic oxygen is significantly larger than that determined for singlet atomic oxygen. This study can help achieve a better understanding of the fundamental chemical processes during plasma-treated solution experiments and promotes advances in applications of QM/MM calculations at the gas-liquid interface.

Antimicrobial activity of cold atmospheric-pressure argon plasma combined with chicory (Cichorium intybus L.) extract against P. aeruginosa and E. coli biofilms

The present study reports a significant combined antibacterial activity of Cichorium intybus L. (known as Chicory) natural extract with cold atmospheric-pressure argon plasma treatment against multi-drug resistant (MDR) Gram-negative bacteria. To detect reactive species that are generated in the argon plasma, optical emission spectra were recorded. The molecular bands were allocated to the hydroxyl radicals (OH) and neutral nitrogen molecules (N2). Moreover, the atomic lines form the emitted spectra were determined to argon atoms (Ar) and the oxygen atoms (O), respectively. The results revealed that Chicory extract treatment at a concentration of 0.043 g/ml reduced the metabolic activity of P. aeruginosa cells by 42%, while, a reduced metabolic activity of 50.6% was found for E. coli biofilms. Moreover, the combination of Chicory extract with 3 min Ar-plasma introduced a synergistic effect, so that it exhibited a significantly reduced metabolic activity of P. aeruginosa to 84.1%, and E. coli ones to 86.7%, respectively. The relationship between cell viability and membrane integrity of P. aeruginosa and E. coli biofilms treated with Chicory extract and argon plasma jet were also analyzed by CLSM. It was found that after the combined treatment, a noticeable membrane disruption was formed. Besides, it was concluded that E. coli biofilms showed a higher sensitivity to Ar-plasma than P. aeruginosa biofilm at longer plasma exposure times. This study suggests that the anti-biofilm therapy based on a combined effect of Chicory extract and cold argon plasma treatment can serve as a considerable green method for treatment of antimicrobial MDR bacteria.

Applications of Plasma-Activated Water in Dentistry: A Review

The activation of water by non-thermal plasma creates a liquid with active constituents referred to as plasma-activated water (PAW). Due to its active constituents, PAW may play an important role in different fields, such as agriculture, the food industry and healthcare. Plasma liquid technology has received attention in recent years due to its versatility and good potential, mainly focused on different health care purposes. This interest has extended to dentistry, since the use of a plasma–liquid technology could bring clinical advantages, compared to direct application of non-thermal atmospheric pressure plasmas (NTAPPs). The aim of this paper is to discuss the applicability of PAW in different areas of dentistry, according to the published literature about NTAPPs and plasma–liquid technology. The direct and indirect application of NTAPPs are presented in the introduction. Posteriorly, the main reactors for generating PAW and its active constituents with a role in biomedical applications are specified, followed by a section that discusses, in detail, the use of PAW as a tool for different oral diseases.

Plasma-activated water production and its application in agriculture

The use of plasma-activated water (PAW) treatment is a promising technology that has many advantages, such as high efficiency, flexibility, environmental safety, and no residue. Thus, PAW has been applied in the agriculture industry to increase agricultural production. The application of PAW technology in agricultural production should emphasize its systematic nature, controllability, and operability, making it practical. This review systematically illustrates the production of PAW and the factors influencing it. The application of PAW in agriculture and its mechanism are discussed, including the effect on seed germination, the promotion of plant growth, and the control of plant diseases and pests. The implications of PAW for agriculture production and some of the related challenges are discussed. This review provides a deeper understanding of the viability of PAW technology in agriculture production. © 2021 Society of Chemical Industry.

Interactions of plasma-activated water with biofilms: inactivation, dispersal effects and mechanisms of action

Biofilms have several characteristics that ensure their survival in a range of adverse environmental conditions, including high cell numbers, close cell proximity to allow easy genetic exchange (e.g., for resistance genes), cell communication and protection through the production of an exopolysaccharide matrix. Together, these characteristics make it difficult to kill undesirable biofilms, despite the many studies aimed at improving the removal of biofilms. An elimination method that is safe, easy to deliver in physically complex environments and not prone to microbial resistance is highly desired. Cold atmospheric plasma, a lightning-like state generated from air or other gases with a high voltage can be used to make plasma-activated water (PAW) that contains many active species and radicals that have antimicrobial activity. Recent studies have shown the potential for PAW to be used for biofilm elimination without causing the bacteria to develop significant resistance. However, the precise mode of action is still the subject of debate. This review discusses the formation of PAW generated species and their impacts on biofilms. A focus is placed on the diffusion of reactive species into biofilms, the formation of gradients and the resulting interaction with the biofilm matrix and specific biofilm components. Such an understanding will provide significant benefits for tackling the ubiquitous problem of biofilm contamination in food, water and medical areas.