Nanocomposite scaffolds with tunable mechanical and degradation capabilities: co-delivery of bioactive agents for bone tissue engineering

Poly(lactic acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering

Different parts of bones possess different properties, such as the capacity for remodeling cell content, porosity, and protein composition. For various traumatic or surgical tissue defects, the application of tissue-engineered constructs seems to be a promising strategy. Despite significant research efforts, such constructs are still rarely available in the clinic. One of the reasons is the lack of resorbable materials, whose properties can be adjusted according to the intended tissue or tissue contacts. Here, we present our first results on the development of a toolbox, by which the scaffolds with easily tunable mechanical and biological properties could be prepared. Biodegradable poly(lactic acid) and nanocrystalline cellulose methacrylated particles were obtained, characterized, and used for preparation of three-dimensional scaffolds via cryogelation and 3D printing approaches. The composition of particles-based ink for 3D printing was optimized in order to allow formation of stable materials. Both the modified-particle cytotoxicity and the matrix-supported cell adhesion were evaluated and visualized in order to confirm the perspectives of materials application.

How Efficient are Alendronate-Nano/Biomaterial Combinations for Anti-Osteoporosis Therapy? An Evidence-Based Review of the Literature

Osteoporosis is defined as a systemic skeletal disease characterized by low bone mass and microarchitectural deterioration of bone tissue, with a consequent increase in bone fragility and susceptibility to fracture. Because of the systemic nature of osteoporosis, the associated escalation in fracture risk affects virtually all skeletal sites. The problem is serious since it is estimated that more than 23 million men and women are at high risk of osteoporotic-like breakages in the European Union. Alendronate (ALN) is the most commonly prescribed oral nitrogen-containing bisphosphonate (BP) for the prevention and the therapy of osteoporosis. This is also one of the most intensely studied drugs in this field. However, ALN is characterized by restricted oral absorption and bioavailability and simultaneously its administration has serious side-effects (jaw osteonecrosis, irritation of the gastrointestinal system, nausea, musculoskeletal pain, and cardiovascular risks). Therefore, delivery systems enabling controlled release and local action of this drug are of great interest, being widely researched and presented in the literature. In this review, we discuss the current trends in the design of various types of alendronate carriers. Our paper is focused on the most recent developments in the field of nano/biomaterials-based systems for ALN delivery, including nano/microformulations, synthetic/natural polymeric and inorganic materials, hydrogel-based materials, scaffolds, coated-like structures, as well as organic-inorganic hybrids. Topics related to the treatment of complex bone diseases including osteoporosis have been covered in several more general reviews; however, the systems for this particular drug have not yet been discussed in detail.

Alginate-based Composites Microspheres: Preparations and Applications for Bone Tissue Engineering

Alginate-based biomaterials have been extensively studied for bone tissue engineering. Scaffolds, microspheres, and hydrogels can be developed using alginate, which is biocompatible, biodegradable, and able to deliver growth factors and drugs. Alginate microspheres can be produced using crosslinking, microfluidic, three-dimensional printing, extrusion, and emulsion methods. The sizes of the alginate microspheres range from 10 µm to 4 mm. This review describes the chemical characterization and mechanical assessment of alginate-based microspheres. Combinations of alginate with hydroxyapatite, chitosan, collagen, polylactic acid, polycaprolactone, and bioglass were discussed for bone tissue repair and regeneration. In addition, alginate combinations with bone morphogenetic proteins, vascular endothelial growth factor, transforming growth factor beta-3, other growth factors, cells, proteins, drugs, and osteoinductive drugs were analyzed for tissue engineering applications. Furthermore, the biocompatibility of developed alginate microspheres was discussed for different cell lines. Finally, alginate microsphere-based composites with stem cell interaction for bone tissue regeneration were presented. In the present review, we have assessed the preclinical research on in vivo models of alginate-based microspheres for bone tissue repair and regeneration. Overall, alginate-based microspheres are potential candidates for graft substitutes and the treatment of various bone-related diseases.

New Progress in Improving the Delivery Methods of Bisphosphonates in the Treatment of Bone Tumors

Bone tumors are tumors that occur in the bone or its accessory tissues, including primary tumors and metastatic tumors. The main mechanism of bisphosphonate is to inhibit the resorption of destructive bone, inhibit the activity of osteoclasts and reduce the concentration of blood calcium. Therefore, bisphosphonates can be used for malignant hypercalcaemia, pain caused by osteolytic bone metastasis, prevention of osteolytic bone metastasis, multiple myeloma osteopathy, improving radiosensitivity and so on. However, the traditional administration of bisphosphonates can cause a series of adverse reactions. To overcome this disadvantage, it is necessary to develop novel methods to improve the delivery of bisphosphonates. In this paper, the latest research progress of new and improved bisphosphonate drug delivery methods in the treatment of bone tumors is reviewed. At present, the main design idea is to connect bisphosphonate nanoparticles, liposomes, microspheres, microcapsules, couplings, prodrugs and bone tissue engineering to targeted anti-tumors systems, and positive progress has been made in in vitro and animal experiments. However, its safety and effectiveness in human body still need to be verified by more studies.

Fe(III)-mediated reversible catalytic activity of MoS2 nanozymes for bisphosphonate drug sensing

Peroxidase-like activity of MoS₂ quantum dots (QDs) can be reversibly regulated by means of Fe³⁺/alendronate sodium (ALDS)-induced aggregation/disaggregation of the QDs in solution. Specifically, Fe³⁺ can selectively aggregate the MoS₂ QDs and thus greatly enhance their peroxidase-like activity, while such enhancement can be inhibited in the presence of ALDS owing to the competitive coordination of ALDS with Fe³⁺. By regulating the enzyme-like activity of MoS₂ QDs, different colorimetric signal of a typical substrate of horseradish peroxidase, 3,3΄,5,5΄-tetramethylbenzidine, can be measured in the presence of H₂O₂. Based on this mechanism, we develop a colorimetric approach for the determination of ALDS and further applied in quality control of pharmaceutical products, utilizing either smartphone or UV-vis spectrometer as a readout. This detection method is rapid and selective, where derivatization of ALDS before detection is not needed. Such a smartphone-based colorimetric detection platform is promising to be applied in point-of-care testing at home, small clinics, or underdeveloped regions.

Evolving applications of the egg: chorioallantoic membrane assay and ex vivo organotypic culture of materials for bone tissue engineering

The chick chorioallantoic membrane model has been around for over a century, applied in angiogenic, oncology, dental and xenograft research. Despite its often perceived archaic, redolent history, the chorioallantoic membrane assay offers new and exciting opportunities for material and growth factor evaluation in bone tissue engineering. Currently, superior/improved experimental methodology for the chorioallantoic membrane assay are difficult to identify, given an absence of scientific consensus in defining experimental approaches, including timing of inoculation with materials and the analysis of results. In addition, critically, regulatory and welfare issues impact upon experimental designs. Given such disparate points, this review details recent research using the ex vivo chorioallantoic membrane assay and the ex vivo organotypic culture to advance the field of bone tissue engineering, and highlights potential areas of improvement for their application based on recent developments within our group and the tissue engineering field.

Bisphosphonate-Functionalized Scaffolds for Enhanced Bone Regeneration

The local sustained release of bioactive substances are attracting increasing attention in bone tissue engineering, which is beneficial to bone tissue formation and helps to improve the bone ingrowth ability of a scaffold. Bisphosphonates (BPs), as a representative kind of osteoclast inhibitors, are proven to possess excellent osteogenic induction capability. Accordingly, various physical and chemical strategies are developed to functionalize bone tissue scaffolds with BPs to achieve controlled release profiles. Compared with traditional treatment modalities, local release of BPs from these composite scaffolds will contribute to continuous bone integration without the risk of many complications. This review explores the molecular mechanisms of BPs on bone metabolism and analyzes the appropriate concentrations of BPs that promote bone regeneration. The advanced BP loading strategies, implant modification technologies, and BP-loaded composite scaffolds based on different matrices are summarized. Finally, the latest advances and the future development of BP-modified scaffolds for enhanced bone regeneration are discussed. This article provides leading-edge design strategies of the BP-functionalized bone engineering scaffolds for improved bone repairability.

Use of nanoparticles in skeletal tissue regeneration and engineering

Bone and osteochondral defects represent one of the major causes of disabilities in the world. Derived from traumas and degenerative pathologies, these lesions cause severe pain, joint deformity, and loss of joint motion. The standard treatments in clinical practice present several limitations. By producing functional substitutes for damaged tissues, tissue engineering has emerged as an alternative in the treatment of defects in the skeletal system. Despite promising preliminary clinical outcomes, several limitations remain. Nanotechnologies could offer new solutions to overcome those limitations, generating materials more closely mimicking the structures present in naturally occurring systems. Nanostructures comparable in size to those appearing in natural bone and cartilage have thus become relevant in skeletal tissue engineering. In particular, nanoparticles allow for a unique combination of approaches (e.g. cell labelling, scaffold modification or drug and gene delivery) inside single integrated systems for optimized tissue regeneration. In the present review, the main types of nanoparticles and the current strategies for their application to skeletal tissue engineering are described. The collection of studies herein considered confirms that advanced nanomaterials will be determinant in the design of regenerative therapeutic protocols for skeletal lesions in the future.

Supercritical CO2 foamed composite scaffolds incorporating bioactive lipids promote vascularized bone regeneration via Hif-1α upregulation and enhanced type H vessel formation

Bone tissue engineering has substantial potential for the treatment of massive bone defects; however, efficient vascularization coupled with bone regeneration still remains a challenge in this field. In the current study, supercritical carbon dioxide (scCO₂) foaming technique was adopted to fabricate mesoporous bioactive glasses (MBGs) particle-poly (lactic-co-glycolic acid) (PLGA) composite scaffolds with appropriate mechanical and degradation properties as well as in vitro bioactivity. The MBG-PLGA scaffolds incorporating the bioactive lipid FTY720 (designated as FTY/MBG-PLGA) exhibited simultaneously sustained release of the bioactive lipid and ions. In addition to providing a favorable microenvironment for cellular adhesion and proliferation, FTY/MBG-PLGA scaffolds significantly facilitated the in vitro osteogenic differentiation of rBMSCs and also markedly stimulated the upregulation of Hif-1α expression via the activation of the Erk1/2 pathway, which mediated the osteogenic and pro-angiogenic effects on rBMSCs. Furthermore, FTY/MBG-PLGA extracts induced superior in vitro angiogenic performance of HUVECs. In vivo evaluation of critical-sized rat calvarial bone defects indicated that FTY/MBG-PLGA scaffolds potently promoted vascularized bone regeneration. Notably, the significantly enhanced formation of type H vessels (CD31^hiEmcn^hi neo-vessels) was observed in newly formed bone tissue in FTY/MBG-PLGA group, strongly suggesting that FTY720 and therapeutic ions released from the scaffolds synergistically induced more type H vessel formation, which indicated the coupling of angiogenesis and osteogenesis to achieve efficiently vascularized bone regeneration. Overall, the results indicated that the foamed porous MBG-PLGA scaffolds incorporating bioactive lipids achieved desirable vascularization-coupled bone formation and could be a promising strategy for bone regenerative medicine. STATEMENT OF SIGNIFICANCE: Efficacious coupling of vascularizationandbone formation is critical for the restoration of large bone defects. Anoveltechnique was used to fabricate composite scaffolds incorporating bioactive lipids which possessedsynergistic cues of bioactive lipids and therapeutic ions to potently promotebone regenerationas well as vascularization. The underlying molecular mechanism for the osteogenic and pro-angiogenic effects of the compositescaffolds was unveiled. Interestingly, the scaffolds were furtherfoundto enhance the formation oftype H capillarieswithin the bone healing microenvironment to couple angiogenesis to osteogenesis to achieve satisfyingvascularizedbone regeneration.These findings provide a novel strategy to develop efficiently vascularized engineering constructs to treat massive bone defects.

Biomimetic delivery of signals for bone tissue engineering

Bone tissue engineering is an exciting approach to directly repair bone defects or engineer bone tissue for transplantation. Biomaterials play a pivotal role in providing a template and extracellular environment to support regenerative cells and promote tissue regeneration. A variety of signaling cues have been identified to regulate cellular activity, tissue development, and the healing process. Numerous studies and trials have shown the promise of tissue engineering, but successful translations of bone tissue engineering research into clinical applications have been limited, due in part to a lack of optimal delivery systems for these signals. Biomedical engineers are therefore highly motivated to develop biomimetic drug delivery systems, which benefit from mimicking signaling molecule release or presentation by the native extracellular matrix during development or the natural healing process. Engineered biomimetic drug delivery systems aim to provide control over the location, timing, and release kinetics of the signal molecules according to the drug's physiochemical properties and specific biological mechanisms. This article reviews biomimetic strategies in signaling delivery for bone tissue engineering, with a focus on delivery systems rather than specific molecules. Both fundamental considerations and specific design strategies are discussed with examples of recent research progress, demonstrating the significance and potential of biomimetic delivery systems for bone tissue engineering.

Biomaterials for Regenerative Medicine: Historical Perspectives and Current Trends

Biomaterials are key components in tissue engineering and regenerative medicine applications, with the intended purpose of reducing the burden of disease and enhancing the quality of life of a large number of patients. The success of many regenerative medicine strategies, such as cell-based therapies, artificial organs, and engineered living tissues, is highly dependent on the ability to design or produce suitable biomaterials that can support and guide cells during tissue healing and remodelling processes. This chapter presents an overview about basic research concerning the use of different biomaterials for tissue engineering and regenerative medicine applications. Starting from a historical perspective, the chapter introduces the basic principles of designing biomaterials for tissue regeneration approaches. The main focus is set on describing the main classes of biomaterials that have been applied in regenerative medicine, including natural and synthetic polymers, bioactive ceramics, and composites. For each class of biomaterials, some of the most important physicochemical and biological properties are presented. Finally, some challenges and concerns that remain in this field are presented and discussed.

RhBMP-2-loaded Poly(lactic-co-glycolic acid) microspheres fabricated by coaxial electrospraying for protein delivery

In this study, we fabricated recombinant human bone morphogenetic protein-2 (rhBMP-2) loaded Poly(lactic-co-glycolic acid) (PLGA) microspheres with core-shell structures and particle sizes ranging from 2.5 to 8 μm by coaxial electrospraying. The manufacturing process of core-shell microspheres by coaxial electrospraying is simpler than that with other methods, and a smaller diameter can be obtained. The microspheres were analyzed by environmental scanning electron microscopy, transmission electron microscopy (TEM), and laser scanning confocal microscopy (LSCM). Moreover, the drug release profiles and degradation of rhBMP-2-loaded PLGA microspheres in vitro were investigated for 21 days and for 7 weeks, respectively. The rhBMP-2 was stabilized by using bovine serum albumin (BSA) to ensure protein activity in the electrospraying process. Fluorescently labeled protein that was loaded into the core-shell PLGA microspheres was verified by LSCM. The distinct layered structure that existed in the manufactured core-shell microspheres can be observed by TEM. Cell Counting Kit-8 (CCK-8) indicated that the core-shell PLGA microspheres loaded with rhBMP-2 have great potential for the treatment of bone defects, for bone regeneration, and in bone tissue engineering.

Biomedical applications of natural-based polymers combined with bioactive glass nanoparticles

The combination of natural polymers with nanoparticles allowed the development of functional bioinspired constructs. This review discusses the composition, design, and applications of bioinspired nanocomposite constructs based on bioactive glass nanoparticles (BGNPs).