Applications of oxidoreductases: Recent progress

Harnessing biocatalysis as a green tool in antibiotic synthesis and discovery

Biocatalysis offers a sustainable approach to drug synthesis, leveraging the high selectivity and efficiency of enzymes. This review explores the application of biocatalysis in the early-stage synthesis of antimicrobial compounds, emphasizing its advantages over traditional chemical methods. We discuss various biocatalysts, including enzymes and whole-cell systems, and their role in the selective functionalization and preparation of antimicrobials and antibacterial building blocks. The review underscores the potential of biocatalysis to advance the development of new antibiotics and suggests directions and potential applications of enzymes in drug development.

Product Distribution of Steady-State and Pulsed Electrochemical Regeneration of 1,4-NADH and Integration with Enzymatic Reaction

The direct electrochemical reduction of nicotinamide adenine dinucleotide (NAD+) results in various products, complicating the regeneration of the crucial 1,4-NADH cofactor for enzymatic reactions. Previous research primarily focused on steady-state polarization to examine potential impacts on product selectivity. However, this study explores the influence of dynamic conditions on the selectivity of NAD+ reduction products by comparing two dynamic profiles with steady-state conditions. Our findings reveal that the main products, including 1,4-NADH, several dimers, and ADP-ribose, remained consistent across all conditions. A minor by-product, 1,6-NADH, was also identified. The product distribution varied depending on the experimental conditions (steady state vs. dynamic) and the concentration of NAD+, with higher concentrations and overpotentials promoting dimerization. The optimal yield of 1,4-NADH was achieved under steady-state conditions with low overpotential and NAD+ concentrations. While dynamic conditions enhanced the 1,4-NADH yield at shorter reaction times, they also resulted in a significant amount of unidentified products. Furthermore, this study assessed the potential of using pulsed electrochemical regeneration of 1,4-NADH with enoate reductase (XenB) for cyclohexenone reduction.

Revealing the atomic and electronic mechanism of human manganese superoxide dismutase product inhibition

Human manganese superoxide dismutase (MnSOD) is a crucial oxidoreductase that maintains the vitality of mitochondria by converting superoxide (O2●-) to molecular oxygen (O2) and hydrogen peroxide (H2O2) with proton-coupled electron transfers (PCETs). Human MnSOD has evolved to be highly product inhibited to limit the formation of H2O2, a freely diffusible oxidant and signaling molecule. The product-inhibited complex is thought to be composed of a peroxide (O22-) or hydroperoxide (HO2-) species bound to Mn ion and formed from an unknown PCET mechanism. PCET mechanisms of proteins are typically not known due to difficulties in detecting the protonation states of specific residues that coincide with the electronic state of the redox center. To shed light on the mechanism, we combine neutron diffraction and X-ray absorption spectroscopy of the product-bound, trivalent, and divalent states of the enzyme to reveal the positions of all the atoms, including hydrogen, and the electronic configuration of the metal ion. The data identifies the product-inhibited complex, and a PCET mechanism of inhibition is constructed.

Nanocatalysts for modulating antitumor immunity: fabrication, mechanisms and applications

Immunotherapy harnesses the inherent immune system in the body to generate systemic antitumor immunity, offering a promising modality for defending against cancer. However, tumor immunosuppression and evasion seriously restrict the immune response rates in clinical settings. Catalytic nanomedicines can transform tumoral substances/metabolites into therapeutic products in situ, offering unique advantages in antitumor immunotherapy. Through catalytic reactions, both tumor eradication and immune regulation can be simultaneously achieved, favoring the development of systemic antitumor immunity. In recent years, with advancements in catalytic chemistry and nanotechnology, catalytic nanomedicines based on nanozymes, photocatalysts, sonocatalysts, Fenton catalysts, electrocatalysts, piezocatalysts, thermocatalysts and radiocatalysts have been rapidly developed with vast applications in cancer immunotherapy. This review provides an introduction to the fabrication of catalytic nanomedicines with an emphasis on their structures and engineering strategies. Furthermore, the catalytic substrates and state-of-the-art applications of nanocatalysts in cancer immunotherapy have also been outlined and discussed. The relationships between nanostructures and immune regulating performance of catalytic nanomedicines are highlighted to provide a deep understanding of their working mechanisms in the tumor microenvironment. Finally, the challenges and development trends are revealed, aiming to provide new insights for the future development of nanocatalysts in catalytic immunotherapy.

In silico approaches to investigate enzyme immobilization: a comprehensive systematic review

Enzymes are popular catalysts with many applications, especially in industry. Biocatalyst usage on a large scale is facing some limitations, such as low operational stability, low recyclability, and high enzyme cost. Enzyme immobilization is a beneficial strategy to solve these problems. Bioinformatics tools can often correctly predict immobilization outcomes, resulting in a cost-effective experimental phase with the least time consumed. This study provides an overview of in silico methods predicting immobilization processes via a comprehensive systematic review of published articles till 11 December 2022. It also mentions the strengths and weaknesses of the processes and explains the computational analyses in each method that are required for immobilization assessment. In this regard, Web of Science and Scopus databases were screened to gain relevant publications. After screening the gathered documents (n = 3873), 60 articles were selected for the review. The selected papers have applied in silico procedures including only molecular dynamics (MD) simulations (n = 20), parallel tempering Monte Carlo (PTMC) and MD simulations (n = 3), MD and docking (n = 1), density functional theory (DFT) and MD (n = 1), only docking (n = 11), metal ion binding site prediction (MIB) server and docking (n = 2), docking and DFT (n = 1), docking and analysis of enzyme surfaces (n = 1), only DFT (n = 1), only MIB server (n = 2), analysis of an enzyme structure and surface (n = 12), rational design of immobilized derivatives (RDID) software (n = 3), and dissipative particle dynamics (DPD; n = 2). In most included studies (n = 51), enzyme immobilization was investigated experimentally in addition to in silico evaluation.

Revealing the atomic and electronic mechanism of human manganese superoxide dismutase product inhibition

Human manganese superoxide dismutase (MnSOD) is a crucial oxidoreductase that maintains the vitality of mitochondria by converting O 2 ∙ - to O 2 and H 2 O 2 with proton-coupled electron transfers (PCETs). Since changes in mitochondrial H 2 O 2 concentrations are capable of stimulating apoptotic signaling pathways, human MnSOD has evolutionarily gained the ability to be highly inhibited by its own product, H 2 O 2 . A separate set of PCETs is thought to regulate product inhibition, though mechanisms of PCETs are typically unknown due to difficulties in detecting the protonation states of specific residues that coincide with the electronic state of the redox center. To shed light on the underlying mechanism, we combined neutron diffraction and X-ray absorption spectroscopy of the product-bound, trivalent, and divalent states to reveal the all-atom structures and electronic configuration of the metal. The data identifies the product-inhibited complex for the first time and a PCET mechanism of inhibition is constructed.

AIE Polymer Micelle/Vesicle Photocatalysts Combined with Native Enzymes for Aerobic Photobiocatalysis

Biocatalytic transformation has attracted increasing attention in the green synthesis of chemicals due to the diversity of enzymes, their high catalytic activities and specificities, and environmentally benign conditions. Most redox enzymes in nature are dependent on nicotinamide cofactors like β-nicotinamide adenine dinucleotide (NAD⁺)/reduced nicotinamide adenine dinucleotide (NADH). The use of solar energy, especially visible light, in the regeneration of cofactors through the combination of photocatalysis and biocatalysis provides an extraordinary opportunity to make complete green processes. However, the combination of photocatalysts and enzymes has been challenged by the rapid degradation and deactivation of the enzymatic material by photogenerated reactive oxygen species (ROS). Here, we design core-shell structured polymer micelles and vesicles with aggregation-induced emission (AIE) as visible-light-mediated photocatalysts for highly stable and recyclable photobiocatalysis under aerobic conditions. NAD⁺ from NADH can be efficiently regenerated by the photoactive hydrophobic core of polymer micelles and the hydrophobic membrane of polymer vesicles, while the enzymatic material (glucose 1-dehydrogenase) is screened from the attack of photogenerated ROS by the hydrophilic surface layer of polymer colloids. After at least 10 regeneration cycles, the enzyme keeps its active state; meanwhile, polymer micelles and vesicles maintain their photocatalytic activity. These polymer colloids show the potential to be developed for the implementation of industrially relevant photobiocatalytic systems.

Water-Enabled H2 Generation from Hydrogenated Silicon Nanosheets for Efficient Anti-Inflammation

As an emerging therapeutic gas, hydrogen (H₂) is gifted with excellent biosafety, high tissue permeability, and radical-trapping capacity and is extensively considered as a highly promising antioxidant in clinics. However, a facile and effective strategy of H₂ production for major inflammatory disease treatments is still lacking. In this study, by a facile wet-chemical exfoliation synthesis, a hydrogen-terminated silicon nanosheet (H-silicene) has been synthesized, which can favorably react with environmental water to generate H₂ rapidly and continuously without any external energy input. Furthermore, theoretical calculations were employed to reveal the mechanism of enhanced H₂ generation efficacy of H-silicene nanosheets. The as-synthesized H-silicene has been explored as a flexible hydrogen gas generator for efficient antioxidative stress application for the first time, which highlights a promising prospect of this two-dimensional H-silicene nanomaterial for acute inflammatory treatments by on-demand H₂ production-enabled reactive oxygen species scavenging. This study provides a novel and efficient modality for nanomaterial-mediated H₂ therapy.

Multistep enzyme cascades as a route towards green and sustainable pharmaceutical syntheses

Enzyme cascades are a powerful technology to develop environmentally friendly and cost-effective synthetic processes to manufacture drugs, as they couple different biotransformations in sequential reactions to synthesize the product. These biocatalytic tools can address two key parameters for the pharmaceutical industry: an improved selectivity of synthetic reactions and a reduction of potential hazards by using biocompatible catalysts, which can be produced from sustainable sources, which are biodegradable and, generally, non-toxic. Here we outline a broad variety of enzyme cascades used either in vivo (whole cells) or in vitro (purified enzymes) to specifically target pharmaceutically relevant molecules, from simple building blocks to complex drugs. We also discuss the advantages and requirements of multistep enzyme cascades and their combination with chemical catalysts through a series of reported examples. Finally, we examine the efficiency of enzyme cascades and how they can be further improved by enzyme engineering, process intensification in flow reactors and/or enzyme immobilization to meet all the industrial requirements.

In Situ Synthesis of Natural Antioxidase Mimics for Catalytic Anti-Inflammatory Treatments: Rheumatoid Arthritis as an Example

Mimicking the coordination geometry of the active metal sites of natural enzymes is an efficient strategy in designing therapeutic chemicals with enzymelike in vivo reaction thermodynamics and kinetics. In this study, this chemical concept has been applied for the in situ synthesis of natural antioxidase mimics for catalytic anti-inflammatory treatment by using rheumatoid arthritis, a common and hardly curable immune-mediated diseases, as an example. Briefly, a composite nanomedicine has been first constructed by loading cationic porphyrin ligands into a manganese-engineered mesoporous silica nanocarrier, which can respond to a mildly acidic environment to concurrently release manganous ions and porphyrin ligands, enabling their subsequent coordination and synthesis of manganese porphyrin with a coordination environment of an active Mn site similar to those of the metal sites in natural superoxide dismutase (SOD) and catalase. Due to the strong metal-ligand exchange coupling enabled by the N-ethylpyridinium-2-yl groups tetrasubstituted in the meso positions of N4-macroheterocycles, such a manganese porphyrin presents the SOD-like activity of disproportionating superoxide anions via outer-sphere proton-coupled one-electron transfer (diaquamanganese(III)/monoaquamanganese(II) cycling), as well as the catalase-like activity of disproportionating hydrogen peroxide via inner-sphere proton-coupled two-electron transfer (diaquamanganese(III)/dioxomanganese(V) cycling). Cellular experiments demonstrated the high antioxidative efficacy of the composite nanomedicine in M1 macrophages by promoting their polarization shift to the anti-inflammatory M2 phenotype. Equally importantly, the silicon-containing oligomers released from the manganese silicate nanocarrier can act as heterogeneous nucleation centers of hydroxyapatite for facilitating biomineralization by bone mesenchymal stem cells. Finally, an in vivo adjuvant-induced arthritis animal model further reveals the high efficacy of the nanomedicine in treating rheumatoid arthritis.

Highly Stable, Cold-Active Aldehyde Dehydrogenase from the Marine Antarctic Flavobacterium sp. PL002

Stable aldehyde dehydrogenases (ALDH) from extremophilic microorganisms constitute efficient catalysts in biotechnologies. In search of active ALDHs at low temperatures and of these enzymes from cold-adapted microorganisms, we cloned and characterized a novel recombinant ALDH from the psychrotrophic Flavobacterium PL002 isolated from Antarctic seawater. The recombinant enzyme (F-ALDH) from this cold-adapted strain was obtained by cloning and expressing of the PL002 aldH gene (1506 bp) in Escherichia coli BL21(DE3). Phylogeny and structural analyses showed a high amino acid sequence identity (89%) with Flavobacterium frigidimaris ALDH and conservation of all active site residues. The purified F-ALDH by affinity chromatography was homotetrameric, preserving 80% activity at 4 °C for 18 days. F-ALDH used both NAD+ and NADP+ and a broad range of aliphatic and aromatic substrates, showing cofactor-dependent compensatory KM and kcat values and the highest catalytic efficiency (0.50 µM−1 s−1) for isovaleraldehyde. The enzyme was active in the 4–60 °C-temperature interval, with an optimal pH of 9.5, and a preference for NAD+-dependent reactions. Arrhenius plots of both NAD(P)+-dependent reactions indicated conformational changes occurring at 30 °C, with four(five)-fold lower activation energy at high temperatures. The high thermal stability and substrate-specific catalytic efficiency of this novel cold-active ALDH favoring aliphatic catalysis provided a promising catalyst for biotechnological and biosensing applications.

Biodiversity and biocatalyst activity of culturable hydrocarbonoclastic fungi isolated from Marac-Moruga mud volcano in South Trinidad

Mud volcanoes (MVs) are visible signs of oil and gas reserves present deep beneath land and sea. The Marac MV in Trinidad is the only MV associated with natural hydrocarbon seeps. Petrogenic polyaromatic hydrocarbons (PAHs) in its sediments must undergo biogeochemical cycles of detoxification as they can enter the water table and aquifers threatening ecosystems and biota. Recurrent hydrocarbon seep activity of MVs consolidates the growth of hydrocarbonoclastic fungal communities. Fungi possess advantageous metabolic and ecophysiological features for remediation but are underexplored compared to bacteria. Additionally, indigenous fungi are more efficient at PAH detoxification than commercial/foreign counterparts and remediation strategies remain site-specific. Few studies have focused on hydrocarbonoclastic fungal incidence and potential in MVs, an aspect that has not been explored in Trinidad. This study determined the unique biodiversity of culturable fungi from the Marac MV capable of metabolizing PAHs in vitro and investigated their extracellular peroxidase activity to utilize different substrates ergo their extracellular oxidoreductase activity (> 50% of the strains decolourized of methylene blue dye). Dothideomycetes and Eurotiomycetes (89% combined incidence) were predominantly isolated. ITS rDNA sequence cluster analysis confirmed strain identities. 18 indigenous hydrocarbonoclastic strains not previously reported in the literature and some of which were biosurfactant-producing, were identified. Intra-strain variability was apparent for PAH utilization, oil-tolerance and hydroxylase substrate specificity. Comparatively high levels of extracellular protein were detected for strains that demonstrated low substrate specificity. Halotolerant strains were also recovered which indicated marine-mixed substrata of the MV as a result of deep sea conduits. This work highlighted novel MV fungal strains as potential bioremediators and biocatalysts with a broad industrial applications.

carba Nicotinamide Adenine Dinucleotide Phosphate: Robust Cofactor for Redox Biocatalysis

Here we report a new robust nicotinamide dinucleotide phosphate cofactor analog (carba-NADP+ ) and its acceptance by many enzymes in the class of oxidoreductases. Replacing one ribose oxygen with a methylene group of the natural NADP+ was found to enhance stability dramatically. Decomposition experiments at moderate and high temperatures with the cofactors showed a drastic increase in half-life time at elevated temperatures since it significantly disfavors hydrolysis of the pyridinium-N-glycoside bond. Overall, more than 27 different oxidoreductases were successfully tested, and a thorough analytical characterization and comparison is given. The cofactor carba-NADP+ opens up the field of redox-biocatalysis under harsh conditions.

Direct detection of coupled proton and electron transfers in human manganese superoxide dismutase

Human manganese superoxide dismutase is a critical oxidoreductase found in the mitochondrial matrix. Concerted proton and electron transfers are used by the enzyme to rid the mitochondria of O₂^•−. The mechanisms of concerted transfer enzymes are typically unknown due to the difficulties in detecting the protonation states of specific residues and solvent molecules at particular redox states. Here, neutron diffraction of two redox-controlled manganese superoxide dismutase crystals reveal the all-atom structures of Mn³⁺ and Mn²⁺ enzyme forms. The structures deliver direct data on protonation changes between oxidation states of the metal. Observations include glutamine deprotonation, the involvement of tyrosine and histidine with altered pK_as, and four unusual strong-short hydrogen bonds, including a low barrier hydrogen bond. We report a concerted proton and electron transfer mechanism for human manganese superoxide dismutase from the direct visualization of active site protons in Mn³⁺ and Mn²⁺ redox states.

Human manganese superoxide dismutase (MnSOD) is an oxidoreductase that uses concerted proton and electron transfers to reduce the levels of superoxide radicals in mitochondria, but mechanistic insights into this process are limited. Here, the authors report neutron crystal structures of Mn³⁺SOD and Mn²⁺SOD, revealing changes in the protonation states of key residues in the enzyme active site during the redox cycle.

Advances in the Detection of Dithiocarbamate Fungicides: Opportunities for Biosensors

Dithiocarbamate fungicides (DTFs) are widely used to control various fungal diseases in crops and ornamental plants. Maximum residual limits in the order of ppb-ppm are currently imposed by legislation to prevent toxicity problems associated with excessive use of DTFs. The specific analytical determination of DTFs is complicated by their low solubility in water and organic solvents. This review summarizes the current analytical procedures used for the analysis of DTF, including chromatography, spectroscopy, and sensor-based methods and discusses the challenges related to selectivity, sensitivity, and sample preparation. Biosensors based on enzymatic inhibition demonstrated potential as analytical tools for DTFs and warrant further research, considering novel enzymes from extremophilic sources. Meanwhile, Raman spectroscopy and various sensors appear very promising, provided the selectivity issues are solved.

Microbial lipases and their industrial applications: a comprehensive review

Lipases are very versatile enzymes, and produced the attention of the several industrial processes. Lipase can be achieved from several sources, animal, vegetable, and microbiological. The uses of microbial lipase market is estimated to be USD 425.0 Million in 2018 and it is projected to reach USD 590.2 Million by 2023, growing at a CAGR of 6.8% from 2018. Microbial lipases (EC 3.1.1.3) catalyze the hydrolysis of long chain triglycerides. The microbial origins of lipase enzymes are logically dynamic and proficient also have an extensive range of industrial uses with the manufacturing of altered molecules. The unique lipase (triacylglycerol acyl hydrolase) enzymes catalyzed the hydrolysis, esterification and alcoholysis reactions. Immobilization has made the use of microbial lipases accomplish its best performance and hence suitable for several reactions and need to enhance aroma to the immobilization processes. Immobilized enzymes depend on the immobilization technique and the carrier type. The choice of the carrier concerns usually the biocompatibility, chemical and thermal stability, and insolubility under reaction conditions, capability of easy rejuvenation and reusability, as well as cost proficiency. Bacillus spp., Achromobacter spp., Alcaligenes spp., Arthrobacter spp., Pseudomonos spp., of bacteria and Penicillium spp., Fusarium spp., Aspergillus spp., of fungi are screened large scale for lipase production. Lipases as multipurpose biological catalyst has given a favorable vision in meeting the needs for several industries such as biodiesel, foods and drinks, leather, textile, detergents, pharmaceuticals and medicals. This review represents a discussion on microbial sources of lipases, immobilization methods increased productivity at market profitability and reduce logistical liability on the environment and user.

Ancestral Resurrection and Directed Evolution of Fungal Mesozoic Laccases

Ancestral sequence reconstruction and resurrection provides useful information for protein engineering, yet its alliance with directed evolution has been little explored. In this study, we have resurrected several ancestral nodes of fungal laccases dating back ∼500 to 250 million years. Unlike modern laccases, the resurrected Mesozoic laccases were readily secreted by yeast, with similar kinetic parameters, a broader stability, and distinct pH activity profiles. The resurrected Agaricomycetes laccase carried 136 ancestral mutations, a molecular testimony to its origin, and it was subjected to directed evolution in order to improve the rate of 1,3-cyclopentanedione oxidation, a β-diketone initiator commonly used in vinyl polymerization reactions.IMPORTANCE The broad variety of biotechnological uses of fungal laccases is beyond doubt (food, textiles, pulp and paper, pharma, biofuels, cosmetics, and bioremediation), and protein engineering (in particular, directed evolution) has become the key driver for adaptation of these enzymes to harsh industrial conditions. Usually, the first requirement for directed laccase evolution is heterologous expression, which presents an important hurdle and often a time-consuming process. In this work, we resurrected a fungal Mesozoic laccase node which showed strikingly high heterologous expression and pH stability. As a proof of concept that the ancestral laccase is a suitable blueprint for engineering, we performed a quick directed evolution campaign geared to the oxidation of the β-diketone 1,3-cyclopentanedione, a poor laccase substrate that is used in the polymerization of vinyl monomers.

Extracellular Oxidases of Basidiomycete Neonothopanus nambi: Isolation and Some Properties

Using the original technique of treating biomass with β-glucosidase, a pool of extracellular fungal enzymes was obtained for the first time from the mycelium of basidiomycete Neonothopanus nambi. Two protein fractions containing enzymes with oxidase activity were isolated from the extract by gel-filtration chromatography and conventionally called F1 and F2. Enzyme F1 has a native molecular weight of 80-85 kDa and does not contain chromophore components; however, it catalyzes the oxidation of veratryl alcohol with K_m = 0.52 mM. Probably, this enzyme is an alcohol oxidase. Enzyme F2 with a native molecular weight of approximately 60 kDa is a FAD-containing protein. It catalyzes the cooxidation of phenol with 4-aminoantipyrine without the addition of exogenous hydrogen peroxide, which distinguishes it from the known peroxidases. It was assumed that this enzyme may be a mixed-function oxidase. F2 oxidase has K_m value 0.27 mM for phenol. The temperature optimums for oxidases F1 and F2 are 22-35 and 55-70°C, and pH optimums are 6 and 5, respectively.

Biomimetic synthesis of galantamine via laccase/TEMPO mediated oxidative coupling

Laccase-mediated intramolecular oxidative radical coupling of N-formyl-2-bromo-O-methylnorbelladine afforded a novel and isolable spirocyclohexadienonic intermediate of galantamine.

Evolution of World and Brazilian Markets for Enzymes Produced by Solid-state Fermentation: A Patent Analysis

BACKGROUND

The use of enzymes in various industrial processes has become increasingly frequent. When added to productive processes, it can accelerate reactions and generate a number of new products. The solid state fermentation (SSF), among other applications, has been employed also to obtain enzymes.

OBJECTIVE

The purpose of this prospection was to map registered patent documents about enzymes production by this type of fermentation in the world, identify the most obtained enzymes with patent documents and compilate information about the world and Brazilian enzyme markets.

METHODS

The experimental design was carried out by the keyword-driven scope through the advanced search in the Espacenet database European Patent Office (EPO). The keywords selected were solid-state fermentation and the International Patent Classification code, C12N9 (enzymes; proenzymes), for prospecting of interest.

RESULTS

In 2012, there was the higher number of registered patents (12). China holds 84% of deposited patents. Among the types of depositors, 54% of the selected patent documents were deposited by universities and institutes, and 44% by companies. 76.5% of the evaluated patents used fungi as enzyme producer. Analyzing the enzymes obtained in the registered patents, it is verified that the majority belongs to the group of carbohydrases with 43%, followed by proteases (25%), which are also the two classes of enzymes most commercialized in the market.

CONCLUSION

China holds the majority of the registered patents but North America gets the largest global enzyme market revenue followed by Europe and Pacific Asia. Carbohydrases were the most commercialized enzymes and with the highest number of patents registered. Among the carbohydrases, cellulases, xylanases and amylases are the most frequent in patent registration while being fungi produced.

Fluorescence detection of laccases activity by the photoinduced electron transfer (PET) process

Laccases play a vital role in some physiological processes, for example in morphogenesis, carbon cycle, and defense against parasitism. So, designing a high-sensitivity accurate method is essential for researchers. In this study, a simple fluorescence method based on the function of carbon nitride (g-C₃N₄) by dopamine is synthesized. For the design of this sensor, carbon nitride (g-C₃N₄) is initially synthesis by using a simple method, which is carried out by heating melamine at 550 °C for 3 h and modifying it with dopamine by a linker such as glutaraldehyde. However, the g-C₃N₄-Dopa produced by this method, with an excitation wavelength of 330 nm, has a fluorescence emission at 466 nm. When laccase and g-C₃N₄-Dopa were mixed, dopamine with redox property was oxidized to dopaquinone; this causes the phenomenon of photoinduced electron transfer (PET) process between g-C₃N₄ and the dopaquinone. Hence, fluorescence quenching occurs due to this phenomenon. As a result of these discussions, a sensor for the laccase activity was designed based on the fluorescence quenching degree, supporting a linear range of 0.0-400.0 U L^-1 with the detection limit of 2.0 U L^-1. Using this sensor, the activity of the laccase enzyme in the human serum samples is measured. Dopamine-functionalized carbon nitride was prepared and utilized for the highly sensitive detection of laccases activity.

Production of polyextremotolerant laccase by Achromobacter xylosoxidans HWN16 and Citrobacter freundii LLJ16

•

The biochemical properties of two proteobacteria laccases were assessed.

•

Polyextremotolerant qualities of the laccases were identified.

•

Multiple laccase-encoding genes were observed in laccase-producing strains.

•

Their implication in biotechnological applications was deliberated.

Given the upwelling of a variety of potential applications laccases could participate in, it would be fitting to equally make available laccases that are well suited for the aforementioned. Therefore historian understanding of the catalytic and physicochemical properties is desirable. Owing to this, the biochemical properties of the crude laccases from Achromobacter xylosoxidans HWN16 (Hb9c) and Citrobacter freundii LLJ 16 (Ie1c) were assessed. Furthermore, a hint of the molecular basis for their production from respective organisms was presented. Results showed that both laccases were tolerant, and sometimes had their activities improved by the set of parameters tested. They were active at broad range of temperature (0–90 °C), pH (3–11), and were equally thermo- and pH-stable. Their activities were either improved, or left unabated by cations, detergents, and chloride (5–40%), however, the highlight of the study was their augmented activity, when they were incubated with certain concentrations of fluoride (2–20%), a potent inhibitor. They were depicted to have multiple homologous laccase encoding genes, on molecular evaluation, which may be responsible the conferral of these remarkable qualities they possess. Therefore, the laccases might be beneficial, if employed in formulations for a wide range of environmental and biotechnological applications. Moreover, the molecular machinery of their production be exploited for economical benefits in the immediate future.

Lignin peroxidase isoenzyme: a novel approach to biodegrade the toxic synthetic polymer waste

Fungal metabolites are playing an immense role in developing various sustainable waste treatment processes. The present study aimed at production and characterization of fungal lignin peroxidase (EC 1.11.1.14) with a potential to degrade Polyvinyl Chloride. Optimization studies revealed that the maximum enzyme production occurred at a temperature 25°C, pH 5 in the 4th week of the incubation period with fungal strain. Enzyme assay was performed to find out the dominating enzyme in the culture broth. The molecular weight of the enzyme was found to be 46 kDa. Partially purified lignin peroxidase from Phanerocheate chrysosporium was used for the degradation of PVC films. A significant reduction in the weight of PVC film was observed (31%) in shake flask experiment. FTIR spectra of the enzyme-treated plastic film revealed structural changes in the chemical composition, indicating a specific peak at 2943 cm^-1 that corresponded to alkenyl C-H stretch. Moreover, deterioration on the surface of PVC films was confirmed by Scanning Electron Microscopy tracked through activity assay for the lignin peroxidase. Extracellular lignin peroxidases from P. chrysosporium play a significant role in the degradation of complex polymeric compounds like PVC.

Citrate as Cost-Efficient NADPH Regenerating Agent

The economically efficient utilization of NAD(P)H-dependent enzymes requires the regeneration of consumed reduction equivalents. Classically, this is done by substrate supplementation, and if necessary by addition of one or more enzymes. The simplest method thereof is whole cell NADPH regeneration. In this context we now present an easy-to-apply whole cell cofactor regeneration approach, which can especially be used in screening applications. Simply by applying citrate to a buffer or directly using citrate/-phosphate buffer NADPH can be regenerated by native enzymes of the TCA cycle, practically present in all aerobic living organisms. Apart from viable-culturable cells, this regeneration approach can also be applied with lyophilized cells and even crude cell extracts. This is exemplarily shown for the synthesis of 1-phenylethanol from acetophenone with several oxidoreductases. The mechanism of NADPH regeneration by TCA cycle enzymes was further investigated by a transient isotopic labeling experiment feeding [1,5-¹³C]citrate. This revealed that the regeneration mechanism can further be optimized by genetic modification of two competing internal citrate metabolism pathways, the glyoxylate shunt, and the glutamate dehydrogenase.

In silico Design of Laccase Thermostable Mutants From Lacc 6 of Pleurotus Ostreatus

Fungal laccase enzymes have a great biotechnological potential for bioremediation processes due to their ability to degrade compounds such as ρ-diphenol, aminophenols, polyphenols, polyamines, and aryldiamines. These enzymes have activity at different pH and temperature values, however, high temperatures can cause partial or total loss of enzymatic activity, so it is appropriate to do research to modify their secondary and/or tertiary structure to make them more resistant to extreme temperature conditions. In silico, a structure of the Lacc 6 enzyme of Pleurotus ostreatus was constructed using a laccase of Trametes versicolor as a template. From this structure, 16 mutants with possible resistance at high temperature due to ionic interactions, salt bridges and disulfide bonds were also obtained in silico. It was determined that 12 mutants called 4-DB, 3-DB, D233C-T310C, F468P, 3-SB, L132T, N79D, N372D, P203C, P203V, T147E, and W85F, presented the lowest thermodynamic energy. Based on the previous criterion and determining the least flexibility in the protein structures, three mutants (4-DB, 3-DB, and P203C) were selected, which may present high stability at high temperatures without affecting their active site. The obtained results allow the understanding of the molecular base that increase the structural stability of the enzyme Lacc 6 of Pleurotus ostreatus, achieving the in silico generation of mutants, which could have activity at high temperatures.

Long-Term Monokaryotic Cultures of Pleurotus ostreatus var. florida Produce High and Stable Laccase Activity Capable to Degrade ß-Carotene

An extracellular laccase (Lacc10) was discovered in submerged cultures of Pleurotus ostreatus var. florida bleaching ß-carotene effectively without the addition of a mediator (650 mU/L, pH 4). Heterologous expression in P. pastoris confirmed the activity and structural analyses revealed a carotenoid-binding domain, which formed the substrate-binding pocket and is reported here for the first time. In order to increase activity, 106 basidiospore-derived monokaryons and crosses of compatible progenies were generated. These showed high intraspecific variability in growth rate and enzyme formation. Seventy-two homokaryons exhibited a higher activity-to-growth-rate-relation than the parental dikaryon, and one isolate produced a very high activity (1800 mU/L), while most of the dikaryotic hybrids showed lower activity. The analysis of the laccase gene of the monokaryons revealed two sequences differing in three amino acids, but the primary sequences gave no clue for the diversity of activity. The enzyme production in submerged cultures of monokaryons was stable over seven sub-cultivation cycles.

Heterologous expression of geraniol dehydrogenase for identifying the metabolic pathways involved in the biotransformation of citral by Acinetobacter sp. Tol 5

The biotransformation of citral, an industrially important monoterpenoid, has been extensively studied using many microbial biocatalysts. However, the metabolic pathways involved in its biotransformation are still unclear, because citral is a mixture of the trans-isomer geranial and the cis-isomer neral. Here, we applied the heterologous expression of geoA, a gene encoding geraniol dehydrogenase that specifically converts geraniol to geranial and nerol to neral, to identify the metabolic pathways involved in the biotransformation of citral. Acinetobacter sp. Tol 5 was employed in order to demonstrate the utility of this methodology. Tol 5 transformed citral to (1R,3R,4R)-1-methyl-4-(1-methylethenyl)-1,3-cyclohexanediol and geranic acid. Biotransformation of citral precursors (geraniol and nerol) by Tol 5 transformant cells expressing geoA revealed that these compounds were transformed specifically from geranial. Our methodology is expected to facilitate a better understanding of the metabolic pathways involved in the biotransformation of substrates that are unstable and include geometric isomers.

A chemiluminescence-based catalase assay using H2O2-sensitive CdTe quantum dots

A method is described for the chemiluminescence based determination of the activity of catalase (CAT) using H₂O₂-sensitive CdTe quantum dots (QDs). It is based on the finding that the chemiluminescence (CL) of the CdTe/H₂O₂ system is reduced due to the consumption of H₂O₂ by the catalytic action of CAT. The Michaelis constant is calculated to be 519 ± 27 mM, showing the potential of the method to accurately measure the K_m compared to the standard method. The method does not require QDs to be conjugated to biological/organic molecules and therefore is considered to be a rapid and convenient method for determination of CAT in real samples. At an incubation time of 2 s, the LOD was calculated to be 4.5 unit/mL, with a linear range from 6 to 400 unit/mL. The assay is sensitive, simple, and suitable for practical applications. Graphical abstract Schematic representation of chemiluminescence-based catalase U(CAT) assay using the CdSe QD/H₂O₂ system. The reduction of H₂O₂ is reflected by the chemiluminescence of the QDs. A mechanism is put forward based on the changes in chemiluminescence intensity of the QDs by the consumption of H₂O₂ due to the catalytic action of CAT.

Photobiocatalysis: Activating Redox Enzymes by Direct or Indirect Transfer of Photoinduced Electrons

Biocatalytic transformation has received increasing attention in the green synthesis of chemicals because of the diversity of enzymes, their high catalytic activities and specificities, and mild reaction conditions. The idea of solar energy utilization in chemical synthesis through the combination of photocatalysis and biocatalysis provides an opportunity to make the "green" process greener. Oxidoreductases catalyze redox transformation of substrates by exchanging electrons at the enzyme's active site, often with the aid of electron mediator(s) as a counterpart. Recent progress indicates that photoinduced electron transfer using organic (or inorganic) photosensitizers can activate a wide spectrum of redox enzymes to catalyze fuel-forming reactions (e.g., H₂ evolution, CO₂ reduction) and synthetically useful reductions (e.g., asymmetric reduction, oxygenation, hydroxylation, epoxidation, Baeyer-Villiger oxidation). This Review provides an overview of recent advances in light-driven activation of redox enzymes through direct or indirect transfer of photoinduced electrons.

Protein Engineering for Nicotinamide Coenzyme Specificity in Oxidoreductases: Attempts and Challenges

Oxidoreductases are ubiquitous enzymes that catalyze an extensive range of chemical reactions with great specificity, efficiency, and selectivity. Most oxidoreductases are nicotinamide cofactor-dependent enzymes with a strong preference for NADP or NAD. Because these coenzymes differ in stability, bioavailability and costs, the enzyme preference for a specific coenzyme is an important issue for practical applications. Different approaches for the manipulation of coenzyme specificity have been reported, with different degrees of success. Here we present various attempts for the switching of nicotinamide coenzyme preference in oxidoreductases by protein engineering. This review covers 103 enzyme engineering studies from 82 articles and evaluates the accomplishments in terms of coenzyme specificity and catalytic efficiency compared to wild type enzymes of different classes. We analyzed different protein engineering strategies and related them with the degree of success in inverting the cofactor specificity. In general, catalytic activity is compromised when coenzyme specificity is reversed, however when switching from NAD to NADP, better results are obtained. In most of the cases, rational strategies were used, predominantly with loop exchange generating the best results. In general, the tendency of removing acidic residues and incorporating basic residues is the strategy of choice when trying to change specificity from NAD to NADP, and vice versa. Computational strategies and algorithms are also covered as helpful tools to guide protein engineering strategies. This mini review aims to give a general introduction to the topic, giving an overview of tools and information to work in protein engineering for the reversal of coenzyme specificity.

Review of NAD(P)H-dependent oxidoreductases: Properties, engineering and application

NAD(P)H-dependent oxidoreductases catalyze the reduction or oxidation of a substrate coupled to the oxidation or reduction, respectively, of a nicotinamide adenine dinucleotide cofactor NAD(P)H or NAD(P)⁺. NAD(P)H-dependent oxidoreductases catalyze a large variety of reactions and play a pivotal role in many central metabolic pathways. Due to the high activity, regiospecificity and stereospecificity with which they catalyze redox reactions, they have been used as key components in a wide range of applications, including substrate utilization, the synthesis of chemicals, biodegradation and detoxification. There is great interest in tailoring NAD(P)H-dependent oxidoreductases to make them more suitable for particular applications. Here, we review the main properties and classes of NAD(P)H-dependent oxidoreductases, the types of reactions they catalyze, some of the main protein engineering techniques used to modify their properties and some interesting examples of their modification and application.

Correlation between the Structure and Catalytic Activity of [Cp*Rh(Substituted Bipyridine)] Complexes for NADH Regeneration

A series of water-soluble half-sandwich [Cp*Rh^III(N^N)Cl]⁺ (Cp* = pentamethylcyclopentadiene, N^N-substituted 2,2'-bipyridine) complexes containing electron-donating substituents around the 2,2'-bipyridyl ligand were synthesized and fully characterized for the regioselective reduction of nicotinamide coenzyme (NAD⁺). The influence of the positional effect of the substituents on the structural, electrochemical, and catalytic properties of the catalyst was systematically studied in detail. The catalytic efficiency of the substituted bipyridine Cp*Rh^III complexes are inversely correlated with their redox potentials. The 5,5'-substituted bipyridine Cp*Rh^III complex, which had the lowest reduction potential, most effectively regenerated NADH with a turnover frequency of 1100 h^-1. Detailed kinetic studies on the generation of intermediate(s) provide valuable mechanistic insight into this catalytic cycle and help to direct the future design strategy of corresponding catalysts.

Characterization of Aldehyde Dehydrogenases Applying an Enzyme Assay with In Situ Formation of Phenylacetaldehydes

Herein, different dehydrogenases (DH) were characterized by applying a novel two-step enzyme assay. We focused on the NAD(P)⁺-dependent phenylacetaldehyde dehydrogenases because they produce industrially relevant phenylacetic acids, but they are not well studied due to limited substrate availability. The first assay step comprises a styrene oxide isomerase (440 U mg^-1_protein) which allows the production of pure phenylacetaldehydes (>70 mmol L^-1) from commercially available styrene oxides. Thereafter, a DH of interest can be added to convert phenylacetaldehydes in a broad concentration range (0.05 to 1.25 mmol L^-1). DH activity can be determined spectrophotometrically by following cofactor reduction or alternatively by RP-HPLC. This assay allowed the comparison of four aldehyde dehydrogenases and even of an alcohol dehydrogenase with respect to the production of phenylacetic acids (up to 8.4 U mg^-1_protein). FeaB derived from Escherichia coli K-12 was characterized in more detail, and for the first time, substituted phenylacetaldehydes had been converted. With this enzyme assay, characterization of dehydrogenases is possible although the substrates are not commercially available in sufficient quality but enzymatically producible. The advantages of this assay in comparison to the former one are discussed.

Identification of altered metabolic pathways of γ-irradiated rice mutant via network-based transcriptome analysis

In order to develop rice mutants for crop improvement, we applied γ-irradiation mutagenesis and selected a rice seed color mutant (MT) in the M14 targeting-induced local lesions in genome lines. This mutant exhibited differences in germination rate, plant height, and root length in seedlings compared to the wild-type plants. We found 1645 different expressed probes of MT by microarray hybridization. To identify the modified metabolic pathways, we conducted integrated genomic analysis such as weighted correlation network analysis with a module detection method of differentially expressed genes (DEGs) in MT on the basis of large-scale microarray transcriptional profiling. These modules are largely divided into three subnetworks and mainly exhibit overrepresented gene ontology functions such as oxidation-related function, ion-binding, and kinase activity (phosphorylation), and the expressional coherences of module genes mainly exhibited in vegetative and maturation stages. Through a metabolic pathway analysis, we detected the significant DEGs involved in the major carbohydrate metabolism (starch degradation), protein degradation (aspartate protease), and signaling in sugars and nutrients. Furthermore, the accumulation of amino acids (asparagine and glutamic acid), sucrose, and starch in MT were affected by gamma rays. Our results provide an effective approach for identification of metabolic pathways associated with useful agronomic traits in mutation breeding.

Identification of oxidoreductases from the petroleum Bacillus safensis strain

A gram-positive bacterium, denominated CFA-06, was isolated from Brazilian petroleum in the Campos Basin and is responsible for the degradation of aromatic compounds and petroleum aromatic fractions. The CFA-06 strain was identified as Bacillus safensis using the 16S rRNA and gyrase B sequence. Enzymatic assays revealed the presence of two oxidoreductases: a catalase and a new oxidoreductase. The oxidoreductases were enzymatically digested and analyzed via ESI-LTQ-Orbitrap mass spectrometry. The mass data revealed a novel oxidoreductase (named BsPMO) containing 224 amino acids and 89% homology with a hypothetic protein from B. safensis (CFA-06) and a catalase (named BsCat) with 491 amino acids and 60% similarity with the catalase from Bacillus pumilus (SAFR-032). The new protein BsPMO contains iron atom(s) and shows catalytic activity toward a monooxygenase fluorogenic probe in the presence of cofactors (NADH, NADPH and NAD). This study enhances our knowledge of the biodegradation process of petroleum by B. safensis.