A rationale for delivery of osteoinductive proteins

Surface immobilization of bone morphogenetic protein 2 via a self-assembled monolayer formation induces cell differentiation

Bone extracellular matrix consists of a network of proteins in which growth factors, like bone morphogenetic protein 2 (BMP-2), are embedded and released upon matrix turnover and degradation. Recombinant human (rh)BMP-2 shows promise in enhancing bone fracture repair, although issues regarding finding a suitable delivery system still limit its extensive clinical use. The aim of this study is to determine which cell activities are triggered by the presentation of immobilized rhBMP-2. For this purpose gold surfaces were first decorated with a self-assembled monolayer consisting of a hetero-bifunctional linker. rhBMP-2 was covalently bound to the surfaces via this linker and used to investigate the cellular responses of C2C12 myoblasts. We show that covalently immobilized rhBMP-2 (iBMP-2) initiates short-term signaling events. Using a BMP-responsive reporter gene assay and western blotting to monitor phosphorylation of Smad1/5/8 we prove that iBMP-2 activates BMP-dependent signal transduction. Furthermore, we demonstrate that iBMP-2 suppresses myotube formation and promotes the osteoblast phenotype in C2C12 cells. The bioactivity of surface-bound rhBMP-2 presented in this study is not due to its release into the medium. As such, our simple approach paves the way for the controlled local presentation of immobilized growth factors, limiting degradation while still maintaining biological activity.

Stem cells in the lung parenchyma and prospects for lung injury therapy

Until recently, it was thought that only embryonic stem cells were pluripotent and that adult stem cells were restricted in their differentiative and regenerative potential to become the tissues in which they reside. However, the discovery that adult stem cells in one tissue can contribute to the formation of other tissues, especially after injury or cell damage, implies that stem cells have developmental plasticity. For example, haematopoietic stem cells (HSCs) and mesenchymal stem cells (MSCs) from bone marrow can be used to regenerate diverse tissues at distant sites, including the lung. This article reviews the character of stem cells in the lung parenchyma and focuses on the potential uses of adult stem cells in research of lung injury and lung disease therapies.

Fabrication and mechanical and tissue ingrowth properties of unidirectionally porous hydroxyapatite/collagen composite

This study investigated the effects of the three-dimensional (3-D) pore structure of a porous hydroxyapatite/collagen (HAp/Col) composite on their mechanical properties and in vivo tissue ingrowth. The unique 3-D pore structure, comprising unidirectionally interconnected pores, was fabricated by the unidirectional growth of ice crystals by using a cooling stage and a subsequent freeze-drying process. The unidirectional pores had a spindle-shaped cross section, and their size gradually increased from the bottom to the upper face. The porous composite showed an elastic property and anisotropic compressive strength for the pore directions. While the strength and modulus parallel to the pore axis were 1.3- and twofold higher than those of the porous composite with spherical pores formed randomly, the strength and modulus perpendicular to the pore axis showed the lowest values. The subcutaneous implantations revealed that when compared with the random pores, the unidirectional pores promote the ingrowth of the surrounding tissues into the pores.

Regeneration of articular cartilage--evaluation of osteochondral defect repair in the rabbit using multiphasic implants

OBJECTIVE

To investigate whether two different multiphasic implants could initiate and sustain repair of osteochondral defects in rabbits. The implants address the malleable properties of cartilage while also addressing the rigid characteristics of subchondral bone.

DESIGN

The bone region of both devices consisted of D, D-L, L-polylactic acid invested with hyaluronan (HY). The cartilage region of the first device was a polyelectrolytic complex (PEC) hydrogel of HY and chitosan. In the second device the cartilage region consisted of type I collagen scaffold. Eighteen rabbits were implanted bilaterally with a device, or underwent defect creation with no implant. At 24 weeks, regenerated tissues were evaluated grossly, histologically and via immunostaining for type II collagen.

RESULTS

PEC devices induced a significantly better repair than untreated shams. Collagen devices resulted in a quality of repair close to that of the PEC group, although its mean repair score (19.0+/-4.2) did not differ significantly from that of the PEC group (20.4+/-3.7) or the shams (16.5+/-6.3). The percentage of hyaline-appearing cartilage in the repair was highest with collagen implants, while the degree of bonding of repair to the host, structural integrity of the neocartilage, and reconstitution of the subchondral bone was greatest with PEC devices. Cartilage in both device-treated sites stained positive for type II collagen and GAG.

CONCLUSIONS

Both implants are capable of maintaining hyaline-appearing tissue at 24 weeks. The physicochemical region between the cartilage and bone compartments makes these devices well suited for delivery of different growth factors or drugs in each compartment, or different doses of the same factor. It also renders these devices excellent vehicles for chondrocyte or stem cell transplantation.

Delivery of bone morphogenetic proteins for orthopedic tissue regeneration

Carriers for bone morphogenetic proteins (BMPs) are used to increase retention of these factors at orthopedic treatment sites for a sufficient period of time to allow regenerative tissue forming cells to migrate to the area of injury and to proliferate and differentiate. Carriers can also serve as a matrix for cell infiltration while maintaining the volume in which repair tissue can form. Carriers have to be biocompatible and are often required to be bioresorbable. Carriers also have to be easily, and cost-effectively, manufactured for large-scale production, conveniently sterilized and have appropriate storage requirements and stability. All of these processes have to be approvable by regulatory agencies. The four major categories of BMP carrier materials include natural polymers, inorganic materials, synthetic polymers, composites of these materials. Autograft or allograft carriers have also used. Carrier configurations range from simple depot delivery systems to more complex systems mimicking the extracellular matrix structure and function. Bone regenerative carriers include depot delivery systems for fracture repair, three-dimensional polymer or ceramic composites for segmental repairs and spine fusion and metal or metal/ceramic composites for augmenting implant integration. Tendon/ligament regenerative carriers range from depot delivery systems to three-dimensional carriers that are either randomly oriented or linearly oriented to improve regenerative tissue alignment. Cartilage regenerative systems generally require three-dimensional matrices and often incorporate cells in addition to factors to augment the repair. Alternative BMP delivery systems include viral vectors, genetically altered cells, conjugated factors and small molecules.

Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs

Most tissue engineering (TE) strategies for creating functional replacement tissues or organs rely on the application of temporary three-dimensional scaffolds to guide the proliferation and spread of seeded cells in vitro and in vivo. The characteristics of TE scaffolds are major concerns in the quest to fabricate ideal scaffolds. This paper identifies essential structural characteristics and the pre-requisites for fabrication techniques that can yield scaffolds that are capable of directing healthy and homogeneous tissue development. Emphasis is given to solid freeform (SFF), also known as rapid prototyping, technologies which are fast becoming the techniques of choice for scaffold fabrication with the potential to overcome the limitations of conventional manual-based fabrication techniques. SFF-fabricated scaffolds have been found to be able to address most, if not all the macro- and micro-architectural requirements for TE applications. This paper reviews the application/potential application of state-of-the-art SFF fabrication techniques in creating TE scaffolds. The advantages and limitations of the SFF techniques are compared. Related research carried out worldwide by different institutions, including the authors' research are discussed.

Histological characterization of the early stages of bone morphogenetic protein-induced osteogenesis

On the basis of currently available knowledge, we hypothesize that the initial bone formation, as induced by bone morphogenetic protein (BMP), is influenced by the chemical composition and three-dimensional spatial configuration of the used carrier material. Therefore, in the current study, the osteoinductive properties of porous titanium (Ti) fiber mesh with a calcium phosphate (Ca-P) coating (Ti-CaP), insoluble bone matrix (IBM), fibrous glass membrane (FGM), and porous particles of hydroxy apatite (PPHAP) loaded with rhBMP-2 were compared in a rat ectopic assay model at short implantation periods. Twelve Ti-CaP, 12 IBM, 12 FGM, and 12 PPHAP implants, loaded with rhBMP-2, were subcutaneously placed in 16 Wistar King rats. The rats were sacrificed at 3, 5, 7, and 9 days post-operative, and the implants were retrieved. Histological analysis demonstrated that IBM and Ti-CaP had induced ectopic cartilage and bone formation by 5 and 7 days, respectively. However, in PPHAP, bone formation and cartilage formation were seen together at 7 days. At 9 days, in Ti-CaP, IBM, and PPHAP, cartilage was seen together with trabecular bone. At 9 days, in FGM, only cartilage was observed. Quantitative rating of the tissue response, using a scoring system, demonstrated that the observed differences were statistically significant (Wilcoxon rank sum test, p < 0.05). We conclude that IBM, CaP-coated Ti mesh, FGM, and PPHAP provided with rhBMP-2 can indeed induce ectopic bone formation with a cartilaginous phase in a rat model at short implantation periods. Considering the different chemical composition and three-dimensional spatial configuration of the carrier materials used, these findings even suggest that endochondral ossification is present in rhBMP-2-induced osteogenesis, even though the amount of cartilage may differ.

Bone morphogenetic protein delivery systems

STUDY DESIGN

A review was conducted.

OBJECTIVES

To review the rationale for the use of carrier systems to deliver bone morphogenetic proteins to sites of orthopedic repair, and to discuss commonly used carriers.

SUMMARY OF BACKGROUND DATA

Carriers for bone morphogenetic protein in spine fusion are used to increase the retention of these osteogenic factors at the treatment site, and to serve as an osteoconductive matrix for bone forming cells while maintaining a space or volume in which bone formation can occur.

METHODS

The literature is reviewed and discussed.

RESULTS

Although bone morphogenetic proteins can induce bone formation when delivered in formulation buffer in small animal models, carriers often are used in larger animal models and human clinical trials to maintain the concentration of osteogenic factors at the treatment site for a sufficient period to allow bone-forming cells to migrate to the area of injury and to proliferate and differentiate. For spine fusion, carriers also are required to serve as an osteoconductive matrix for bone-forming cells while maintaining a space or volume in which bone formation can occur. Four major categories of carrier materials are used for osteogenic factor delivery: inorganic materials, synthetic polymers, natural polymers, and composites of the first three materials. In addition, allograft bone has been used to deliver osteogenic factors to the site of orthopedic repairs. The efficacy of osteogenic carrier combinations often is site specific and species specific. The requirement for supraphysiologic concentrations of osteogenic factors may be related to the ability of the delivery system to increase the retention time at the treatment site and overcome tight regulation of these factors by their inhibitors. Dose escalation in large animal models also may be related to a decrease in the number of responding cells and a slower rate of bone formation. New delivery systems being evaluated include depot delivery systems, viral vector systems, conjugated osteogenic factor delivery systems, and oral small molecule targets.

CONCLUSIONS

Delivery systems play an important role in the use of osteogenic factors to augment spine fusions and other orthopedic repairs.

In vitro engineered cartilage constructs produced by press-coating biodegradable polymer with human mesenchymal stem cells

Cartilage constructs were fabricated by press-coating D,D-L,L-polylactic acid polymer blocks of 1 x 0.5 x 0.5 cm onto high-density cell pellets of 1.5 x 10(6) human mesenchymal stem cells (mhMSCs) isolated from the femoral head of patients undergoing total hip arthroplasty. Following attachment of the cell pellets to the polymer surfaces, chondrogenesis was induced by culturing the constructs for 3 weeks in a serum-free, chemically defined, chondrogenic differentiation medium supplemented with transforming growth factor beta-1 (TGF-beta1). Histochemical analysis showed that the press-coated pellets formed cell layers composed of morphologically distinct, chondrocyte-like cells, surrounded by a fibrous, sulfated proteoglycan-rich extracellular matrix. Immunohistochemical analysis detected collagen type II and cartilage proteoglycan link protein within the extracellular matrix. Expression of the cartilage-specific marker genes collagen types II, IX, X, and XI, and aggrecan was detected by RT-PCR. Scanning electron microscopy revealed organized and spatially distinct zones of cells within the cell-polymer constructs, with the superficial layer resembling compact hyaline cartilage. The fabrication method of press-coating biodegradable polymers with mhMSCs allows the in vitro production of cartilage constructs without harvesting chondrocytes from intact articular cartilage surfaces. These constructs may be applicable as prototypes for the reconstruction of articular cartilage defects in humans.

Prefabrication of bone by use of a vascularized periosteal flap and bone morphogenetic protein

The purpose of this pilot study was to prefabricate a vascularized bone graft by using a vascularized periosteal flap containing osteoprogenitor cells, a structural matrix, and recombinant human bone morphogenetic protein-2 (rhBMP-2). In a rat model, a periosteal flap vascularized by the saphenous artery and vein was dissected off the medial surface of the tibia. This flap consisted of three layers-periosteum, muscle, and fascia-and was tubed on itself to form a watertight chamber that was then transferred on its vascular pedicle to the groin. A total of 78 vascularized periosteal chambers were constructed in 39 animals and divided into 10 groups. In group 1, the periosteal chamber was left empty. Groups 2, 3, and 4 consisted of the periosteal flap and rhBMP-2, but in group 3, the proximal vascular pedicle was ligated, and in group 4, the flap was harvested without the periosteal layer and turned inside out. Groups 5 through 10 consisted of the vascularized periosteal flap containing several different structural matrices (calcium alginate spheres, polylactic acid, or demineralized bone matrix) with or without rhBMP-2. Animals were killed at 2, 4, or 8 weeks in each group. The presence and density of any new bone formation was evaluated both radiologically and histologically. Significant bone formation was seen only in those periosteal flaps containing rhBMP-2 and either the calcium alginate or polylactic acid matrix. New bone formation increased both radiologically and histologically from 2 weeks to 8 weeks only in the periosteal flaps containing the polylactic acid matrix and rhBMP-2. This preliminary study therefore suggests that four factors-blood supply, osteoprogenitor cells in the periosteal layer, a biodegradable matrix, and rhBMP-2-are required for optimal prefabrication of a vascularized bone graft.

Delivering on the promise of bone morphogenetic proteins

The advent of bone growth factors has been widely anticipated since their successful production using recombinant DNA technology. Bone morphogenetic proteins (BMPs) are an important class of bone growth factors and will be the focus of this article. In the near future these therapeutics might revolutionize how clinicians treat such diverse orthopedic applications as the healing of broken bones, increasing bone density lost through aging, and strengthening the spine. These potent proteins require application directly at the site of repair via a delivery system. The choice of delivery system has a profound effect on the clinical outcome. In the past decade, researchers have focused on developing efficient delivery systems and advancing these factors from the bench to the clinic.

Growth factor delivery for tissue engineering

A tissue-engineered implant is a biologic-biomaterial combination in which some component of tissue has been combined with a biomaterial to create a device for the restoration or modification of tissue or organ function. Specific growth factors, released from a delivery device or from co-transplanted cells, would aid in the induction of host parenchymal cell infiltration and improve engraftment of co-delivered cells for more efficient tissue regeneration or ameliorate disease states. The characteristic properties of growth factors are described to provide a biological basis for their use in tissue engineered devices. The principles of polymeric device development for therapeutic growth factor delivery in the context of tissue engineering are outlined. A review of experimental evidence illustrates examples of growth factor delivery from devices such as microparticles, scaffolds, and encapsulated cells, for their use in the application areas of musculoskeletal tissue, neural tissue, and hepatic tissue.

Scaffolds in tissue engineering bone and cartilage

Musculoskeletal tissue, bone and cartilage are under extensive investigation in tissue engineering research. A number of biodegradable and bioresorbable materials, as well as scaffold designs, have been experimentally and/or clinically studied. Ideally, a scaffold should have the following characteristics: (i) three-dimensional and highly porous with an interconnected pore network for cell growth and flow transport of nutrients and metabolic waste; (ii) biocompatible and bioresorbable with a controllable degradation and resorption rate to match cell/tissue growth in vitro and/or in vivo; (iii) suitable surface chemistry for cell attachment, proliferation, and differentiation and (iv) mechanical properties to match those of the tissues at the site of implantation. This paper reviews research on the tissue engineering of bone and cartilage from the polymeric scaffold point of view.

Practical illustrations in tissue engineering: surgical considerations relevant to the implantation of osteoinductive devices

This paper provides practical illustrations in the use of osteoinductive devices (biomaterial carriers coupled with osteoinductive morphogens) for bone tissue engineering. We discuss the considerations relative to the implantation of these devices that may induce tissues that are located outside the boundaries of the osteoinductive device as well as outside boundaries of the normal skeletal envelope. Five reports of osteoinductive devices generating such tissues are reviewed. Histologic and radiographic data from a sixth example are presented and compared with histologic and radiographic findings typical of two varieties of myositis ossificans. A theory is advanced that osteoinductive implants may induce ectopic tissues that resemble fibro-osseous pathologies. Finally characteristics of tissue-engineered bone graft substitutes that may contribute to development of these pathologies and device characteristics that may obviate these ectopic tissues are considered.

Radiomorphometry and biomechanical assessment of recombinant human bone morphogenetic protein 2 and polymer in rabbit radius ostectomy model

The study objective was to determine the mechanical integrity and radiopacity of regenerated bone within critical-sized defects (CSDs) in radii of rabbits using recombinant human bone morphogenetic protein 2 (rhBMP-2) with a porous, biodegradable poly(D,L-lactic acid) (PDLLA) carrier (designated PLA). Twenty millimeter, unilateral radial ostectomies were created in 96 skeletally mature New Zealand white rabbits. The rabbits were randomly assigned to six treatment groups with two euthanasia periods. Treatment groups included unfilled defect (n = 8), segmental autograft (n = 8), PLA + 0 microg rhBMP-2 (n = 8), PLA + 17 microg rhBMP-2 (n = 8), PLA + 35 microg rhBMP-2 (n = 8), and PLA + 70 microg rhBMP-2 (n = 8). The radiopacity was significantly greater for the 35- and 70-microg rhBMP-2 groups at 4 weeks compared to unfilled controls, PLA only, and 17-microg rhBMP-2 groups and equivalent to the autograft. At 8 weeks all groups receiving rhBMP-2 were equivalent to the autograft and significantly greater than unfilled defects and PLA alone. Similarly, the biomechanical analysis indicated significantly greater torque at failure for the 35-microg rhBMP-2 group compared to all other groups at 4 weeks. By 8 weeks all groups receiving rhBMP-2 and autograft had significantly greater torque than unfilled controls and PLA alone. These radiomorphometric and biomechanical results indicate PLA may be a suitable carrier for rhBMP-2 used for skeletal regeneration.

Principles of tissue engineering applied to programmable osteogenesis

This article presents a strategy for design, engineering, and fabrication of a bioresorbable, manufactured bone graft substitute (BGS) device. The approach is based on established precepts of osteogenesis, molecular biology of hyaluronic acid and osteoinductive proteins, and theoretical preformance criteria for such a device collated from the literature of 1991 to 1996. Application of this design and engineering strategy results in a composite device consisting of a D,D-L,L-polylactic acid macrostructure optimized to the architecture of cancellous bone, a microstructure composed of a filamentous velour of hyaluronan and a recombinant human bone morphogenetic protein 2 (rhBMP-2). The performance of this construct was tested in vivo in the dog, intertransverse process, spinal fusion model and in a critical sized defect of the rabbit radius. Data from these studies are used to illustrate principle points of the design and engineering concept.

Growth factor delivery for tissue engineering

A tissue-engineered implant is a biologic-biomaterial combination in which some component of tissue has been combined with a biomaterial to create a device for the restoration or modification of tissue or organ function. Specific growth factors, released from a delivery device or from co-transplanted cells, would aid in the induction of host parenchymal cell infiltration and improve engraftment of co-delivered cells for more efficient tissue regeneration or ameliorate disease states. The characteristic properties of growth factors are described to provide a biological basis for their use in tissue engineered devices. The principles of polymeric device development for therapeutic growth factor delivery in the context of tissue engineering are outlined. A review of experimental evidence illustrates examples of growth factor delivery from devices such as microparticles, scaffolds, and encapsulated cells, for their use in the application areas of musculoskeletal tissue, neural tissue, and hepatic tissue.

Tissue-engineered bone biomimetic to regenerate calvarial critical-sized defects in athymic rats

A tissue-engineered bone biomimetic device was developed to regenerate calvaria critical-sized defects (CSDs) in athymic rats. Well-documented evidence clearly confirms that left untreated, CSDs will not spontaneously regenerate bone. To accomplish regeneration, four candidate treatments were assessed: porous poly(D,L-lactide) and type I collagen (PLC), PLC and human osteoblast precursor cells (OPCs) at 2 x 10(5) (PLC/OPCs), PLC and 50 microg of recombinant human bone morphogenetic protein-2 (PLC/rhBMP-2), and PLC/OPCs/rhBMP-2 (the bone biomimetic device). The hypotheses for this study were PLC/OPCs/rhBMP-2 would promote more new bone formation in CSDs than the other treatments and the amount of bone formation would be time dependent. To test the hypotheses, outcomes from treatments were measured at 2 and 4 weeks postoperatively by radiomorphometry for percent radiopacity and by histomorphometry for square millimeters of new bone formation. Data were analyzed by analysis of variance and Fisher's protected least significant difference for multiple comparisons with p < or = 0.05. At 2 and 4 weeks, radiomorphometric data revealed PLC/rhBMP-2 and PLC/OPCs/rhBMP-2 promoted significantly more radiopacity than either PLC or PLC/OPCs. Histomorphometry data at 2 and 4 weeks indicated significantly more new bone formation for PLC/rhBMP-2, PLC/OPCs/rhBMP-2, and PLC/OPCs compared to PLC. By 4 weeks, PLC/OPCs/rhBMP-2 and PLC/rhBMP-2 had regenerated the CSDs with more new bone than the other treatments; the quantity of bone at 4 weeks for these treatments was greater than at 2 weeks.

Isolation of human osteoblast-like cells and in vitro amplification for tissue engineering

As the field of dental implants continues to grow at a rapid rate so does our quest to find new techniques to enhance bone grafting. Tissue engineering is an exciting new technique in bone grafting. Therefore, the purposes of this study were to develop a simple, reproducible method to isolate human osteoblast-like cells (HOBs) and to evaluate in vitro cell proliferation within 2 different 3-dimensional (3-D) constructs targeted for tissue engineering applications. Ultimately, HOBs that have been amplified within 3-D constructs may be employed for bone regeneration techniques, such as onlay and sinus grafting prior to implant placement. Our cell isolation protocol employed human fetal calvaria tissue sequentially digested with trypsin and collagenase. The HOB cells from only the third and fourth digests were obtained, cultured and evaluated within the constructs. An osteoblast-like phenotype was in part verified for these HOB cells by demonstrating a significantly higher alkaline phosphatase activity than for human gingival fibroblasts, and a comparable level to the osteoblast cell line MG-63. The HOB cells were cultured within either poly (D,L-lactide) (PLA) or a fused fiber ceramic and evaluated for the ability to support in vitro HOB amplification. HOB proliferation was validated by scanning electron microscopy, identifying cells throughout the 3-D constructs. Continuous cell viability was demonstrated for the duration of the 33-day evaluation period and the extent of cell amplification reached approximately 20 times the seeding density. The in vitro amplification results further indicate that tissue engineering strategies with either the PLA or fused fiber construct may be suitable for bone regeneration therapy for dental implants.

Macrophysiologic roles of a delivery system for vulnerary factors needed for bone regeneration

Traditional histology identifies three components of bone: cells, an extracellular mineralized organic matrix, and a lymphatic-vascular component. Specialized bone cells known as osteoblasts promote bone regeneration. Clinically, this property has been exploited by surgeons with autografts and bank bone preparations to restore deficient form and function to almost every aspect of the skeleton. Unfortunately, these therapies can be inadequate for patients with panskeletal trauma. Therefore, a suitable alternative may be a laboratory-derived product consisting of a vulnerary factor and delivery system. The integration of a laboratory-engineered product in an osseous wound environment is a formidable challenge demanding a keen appreciation of the product's macrophysiologic roles in wound healing biology. Consequently, the purposes for this paper are 1) to define briefly macrophysiology relevant to a delivery system for vulnerary molecules and bone regeneration; 2) to review a key family of bone regenerating molecules, the bone morphogenetic proteins (BMPs); and 3) to relate delivery system engineering with bone regeneration.