Characterization of a Microbial Transglutaminase Cross-linked Type II Collagen Scaffold

Removal of collagen three-dimensional scaffold bubbles utilizing a vacuum suction technique

The process of generating type I/II collagen scaffolds is fraught with bubble formation, which can interfere with the three-dimensional structure of the scaffold. Herein, we applied low-temperature vacuum freeze-drying to remove mixed air bubbles under negative pressure. Type I and II rubber sponges were acid-solubilized via acid lysis and enzymolysis. Thereafter, vacuum negative pressure was applied to remove bubbles, and the cover glass press method was applied to shape the type I/II original scaffold. Vacuum negative pressure was applied for a second time to remove any residual bubbles. Subsequent application of carbamide/N-hydroxysuccinimide cross-linked the scaffold. The traditional method was used as the control group. The structure and number of residual bubbles and pore sizes of the two scaffolds were compared. Based on the relationship between the pressure and the number of residual bubbles, a curve was created, and the time of ice formation was calculated. The bubble content of the experimental group was significantly lower than that of the control group (P < 0.05). The pore diameter of the type I/II collagen scaffold was higher in the experimental group than in the control group. The time of icing effect of type I and II collagen solution was 136.54 ± 5.26 and 144.40 ± 6.45 s, respectively. The experimental scaffold had a more regular structure with actively proliferating chondrocytes that possessed adherent pseudopodia. The findings indicated that the vacuum negative pressure method did not affect the physical or chemical properties of collagen, and these scaffolds exhibited good biocompatibility with chondrocytes.

Efficacy and safety of microbial transglutaminase-induced scleral stiffening invivo

The purpose of this study was to investigate the efficacy and safety of microbial transglutaminases (mTGases) during scleral collagen cross-linking (CXL) in vivo. Sixteen New Zealand white albino rabbits were treated with sub-Tenon's injections of 2 ml of 1 U/ml mTGases in the right eye and 2 ml of phosphate buffer saline (PBS) in the left eye. The rabbits were killed 2 weeks after the injection, and all eyeballs, including some scleral strips, were processed. The elastic modulus was measured with a biomaterials tester. Histopathological analysis and transmission electron microscopy (TEM) were used for the morphological observations. The elastic modulus of the mTGase-treated sclera was 15.79 ± 2.93 MPa, and that of the control was 6.91 ± 2.23 MPa, indicating an increase of 129% after the mTGases treatment (P < 0.05). The density of the scleral collagen bundles and diameter of the collagen fibrils increased compared with those in the control group. No apoptosis was detected in the retina or posterior sclera by TUNEL staining, and no histological damage was observed on the TEM scan. This study is based on a short-term study on animal models. These results indicate that mTGase-mediated scleral CXL is a promising approach to effectively stiffen the sclera and safe enough for retina, and may be a useful treatment modality for strengthening scleral tissue.

Cutting Edge Aquatic-Based Collagens in Tissue Engineering

Aquatic-based collagens have attracted much interest due to their great potential application for biomedical sectors, including the tissue engineering sector, as a major component of the extracellular matrix in humans. Their physical and biochemical characteristics offer advantages over mammalian-based collagen; for example, they have excellent biocompatibility and biodegradability, are easy to extract, and pose a relatively low immunological risk to mammalian products. The utilization of aquatic-based collagen also has fewer religious restrictions and lower production costs. Aquatic-based collagen also creates high-added value and good environmental sustainability by aquatic waste utilization. Thus, this study aims to overview aquatic collagen's characteristics, extraction, and fabrication. It also highlights its potential application for tissue engineering and the regeneration of bone, cartilage, dental, skin, and vascular tissue. Moreover, this review highlights the recent research in aquatic collagen, future prospects, and challenges for it as an alternative biomaterial for tissue engineering and regenerative medicines.

Hierarchical biofabrication of biomimetic collagen-elastin vascular grafts with controllable properties via lyophilisation

This article describes the development of a hierarchical biofabrication technique suitable to create large but complex structures, such as vascular mimicking grafts, using facile lyophilisation technology amenable to multiple other biomaterial classes. The combination of three fabrication techniques together, namely solvent evaporation, lyophilisation, and crosslinking together allows highly tailorable structures from the microstructure up to the macrostructure, and with the ability to independently crosslink each layer it allows great flexibility to match desired native mechanical properties independently of the micro/macrostructure. We have demonstrated the flexibility of this biofabrication technique by independently optimising each of the layers to create a multi-layered arterial structure with tailored architectural and biophysical/biochemical properties using a collagen-elastin composite. Taken together, the facile biofabrication methodology developed has led to the development of a biomimetic bilayered scaffold suitable for use as a tissue engineered vascular graft (for haemodialysis access or peripheral/coronary bypass), or as an in vitro test platform to examine disease progression, pharmacological toxicity, or cardiovascular medical device testing. STATEMENT OF SIGNIFICANCE: The ability to grow large complex tissues such as blood vessels for transplantation is often hampered by the limitations of the selected biofabrication technique. Here, we sought to overcome some of the fabrication limitations for naturally occurring cardiovascular polymers (collagen/elastin) via a hierarchical approach to fabrication where each layer is built upon the previous. This approach enabled the flexibility to modify and tailor each layer's properties independently via control over polymer concentration, microstructure, and crosslinking. This simple approach facilitated us to fabricate multi-layered vascular grafts which were remodelled into high-density vascular tissue after 21-days. The fabrication approach could be translated to a myriad of other tissues while the engineered vascular graft could also be used as a test platform for drugs/medical devices or as a tissue engineering scaffold for vascular grafting for different indications.

Feasibility Study of Tissue Transglutaminase for Self-Catalytic Cross-Linking of Self-Assembled Collagen Fibril Hydrogel and Its Promising Application in Wound Healing Promotion

Collagen-based bio-hydrogels are undoubtedly a hot spot in the development of biological dressings for wound healing promotion. Herein, glutamine transaminase (TGase), a biological nontoxic cross-linker with high specific activity and reaction rate under mild conditions, was utilized for the self-catalytic cross-linking of the regenerated collagen (COL) fibril hydrogel fabricated through a molecular self-assembly method. The results showed that the natural triple helical conformation of COL remained completely integrated after self-catalytic cross-linking TGase, which was definitively the fundamental for maintaining its superior bioactivity. It was worth noting that TGase could promote the self-assembly process of COL building blocks into a higher order D-period cross-striated structure. Also, the reconstructed TGase cross-linked COL fibrils exhibited a higher degree of interfiber entanglements with more straight and longer fibrils. Meanwhile, the thermal stability of COL was significantly improved after introducing TGase. Besides, the cytocompatibility analysis suggested that the regenerated COL fibril hydrogel showed excellent cell growth activity and proliferation ability when the dosage of TGase is less than 40 U/g. Further, animal experiments indicated that the targeted COL fibril hydrogel could significantly promote skin wound healing, exhibiting better capacity of skin tissue for regeneration than the COL hydrogel untreated as expected. Therefore, the reconstructed TGase cross-linked COL fibril hydrogel could serve as a novel soft material for wound healing promotion.

Bioengineering of microbial transglutaminase for biomedical applications

Microbial transglutaminase (mTGase) is commonly known in the food industry as meat glue due to its incredible ability to "glue" meat proteins together. Aside from being widely exploited in the meat processing industries, mTGase is also widely applied in other food and textile industries by catalysing the formation of isopeptide bonds between peptides or protein substrates. The advancement of technology has opened up new avenues for mTGase in the field of biomedical engineering. Efforts have been made to study the structural properties of mTGase in order to gain an in-depth understanding of the structure-function relationship. This review highlights the developments in mTGase engineering together with its role in biomedical applications including biomaterial fabrication for tissue engineering and biotherapeutics.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

Importance of crosslinking strategies in designing smart biomaterials for bone tissue engineering: A systematic review

Biomaterials are of significant importance in biomedical applications as these biological macromolecules have moderately replaced classical tissue grafting techniques owing to its beneficial properties. Despite of its favourable advantages, poor mechanical and degradative properties of biomaterials are of great concern. To this regard, crosslinkers have emerged as a smart and promising tool to augment the biological functionality of biopolymers. Different crosslinkers have been extensively used in past decades to develop bone substitutes, but the implications of toxic response and adverse reactions are truly precarious after implantation. Traditional crosslinker like glutaraldehyde has been widely used in numerous bio-implants but the potential toxicity is largely being debated with many disproving views. As alternative, green chemicals, enzymatic and non-enzymatic chemicals, bi-functional epoxies, zero-length crosslinkers and physical crosslinkers have been introduced to achieve the desired properties of a bone substitute. In this review, systematic literature search was performed on PubMed database to identify the most commonly used crosslinkers for developing promising bone like materials. The relevant articles were identified, analysed and reviewed in this paper giving due importance to different crosslinking methodologies and comparing their effectiveness and efficacy in regard to material composition, scaffold production, crosslinker dosage, toxicity and immunogenicity. This review summarizes the recent developments in crosslinking mechanism with an emphasis placed on their ability to link proteins through bonding reactions. Finally, this study also covers the convergent and divergent methodologies of crosslinking strategies also giving special importance in retrieving the current limitations and future opportunities of crosslinking modalities in bone tissue engineering.

Biocatalysis by Transglutaminases: A Review of Biotechnological Applications

The biocatalytic activity of transglutaminases (TGs) leads to the synthesis of new covalent isopeptide bonds (crosslinks) between peptide-bound glutamine and lysine residues, but also the transamidation of primary amines to glutamine residues, which ultimately can result into protein polymerisation. Operating with a cysteine/histidine/aspartic acid (Cys/His/Asp) catalytic triad, TGs induce the post-translational modification of proteins at both physiological and pathological conditions (e.g., accumulation of matrices in tissue fibrosis). Because of the disparate biotechnological applications, this large family of protein-remodelling enzymes have stimulated an escalation of interest. In the past 50 years, both mammalian and microbial TGs polymerising activity has been exploited in the food industry for the improvement of aliments' quality, texture, and nutritive value, other than to enhance the food appearance and increased marketability. At the same time, the ability of TGs to crosslink extracellular matrix proteins, like collagen, as well as synthetic biopolymers, has led to multiple applications in biomedicine, such as the production of biocompatible scaffolds and hydrogels for tissue engineering and drug delivery, or DNA-protein bio-conjugation and antibody functionalisation. Here, we summarise the most recent advances in the field, focusing on the utilisation of TGs-mediated protein multimerisation in biotechnological and bioengineering applications.

Biofabricating Functional Soft Matter Using Protein Engineering to Enable Enzymatic Assembly

Biology often provides the inspiration for functional soft matter, but biology can do more: it can provide the raw materials and mechanisms for hierarchical assembly. Biology uses polymers to perform various functions, and biologically derived polymers can serve as sustainable, self-assembling, and high-performance materials platforms for life-science applications. Biology employs enzymes for site-specific reactions that are used to both disassemble and assemble biopolymers both to and from component parts. By exploiting protein engineering methodologies, proteins can be modified to make them more susceptible to biology's native enzymatic activities. They can be engineered with fusion tags that provide (short sequences of amino acids at the C- and/or N- termini) that provide the accessible residues for the assembling enzymes to recognize and react with. This "biobased" fabrication not only allows biology's nanoscale components (i.e., proteins) to be engineered, but also provides the means to organize these components into the hierarchical structures that are prevalent in life.

A self-organising biomimetic collagen/nano-hydroxyapatite-glycosaminoglycan scaffold for spinal fusion

The use of spinal fusion surgery as a treatment for degenerative spinal conditions and chronic back pain is increasing. However, this technique requires use of a bone grafting material to fuse the vertebrae, traditionally autologous bone, which consists of an optimal combination of osteogenic cell precursors, extracellular matrix proteins and mineral components. To date, this remains the 'gold standard' material but its supply is limited and is associated with a number of clinical and ethical difficulties; consequently, various combinations of cells with biological scaffold materials have been tested but have failed to achieve fusion rates even comparable to autologous bone. We successfully fabricated a novel collagen-based scaffold using self-organising atelocollagen combined with nano-hydroxyapatite and chondroitin sulphate, cross-linked by microbial transglutaminase. The scaffold was characterised using a range of imaging, chemical composition and thermal analysis techniques. It was found to exhibit appropriate stiffness and suitable pore size for the adhesion, growth and differentiation of MSCs. The low toxicity makes it suitable for clinical application, and its slow degradation profile would enable the scaffold to promote bone growth over an extended period. This material therefore shows promise for clinical use in spinal fusion and other procedures requiring the use of bone grafts.

A glucose-sensitive block glycopolymer hydrogel based on dynamic boronic ester bonds for insulin delivery

Hydrogels are good candidates to satisfy many needs for functional and tunable biomaterials. How to precisely control the gel structure and functions is crucial for the construction of sophisticated soft biomaterials comprising the hydrogels, which facilitates the impact of the surrounding environment on a unique biological function occurring. Here, glucose-responsive hydrogels comprised of 3-acrylamidophenyl boronic acid copolymerized with 2-lactobionamidoethyl methacrylate (p(APBA-b-LAMA)) were synthesized, and further evaluated as carriers for insulin delivery. The formation of (p(APBA-b-LAMA)) hydrogel was based on dynamic covalent bond using the association of boronic acid with diols. P(APBA-b-LAMA) hydrogel with the typical porous structure showed a rapid increase in equilibrium of swelling, which was up to 1856% after incubation with aqueous solution. Using insulin as a model protein therapeutic, p(APBA-b-LAMA) hydrogel exhibited high drug loading capability up to 15.6%, and also displayed glucose-dependent insulin release under physiological conditions. Additionally, the viability of NIH3T3 cells was more than 90% after treated with p(APBA-b-LAMA) hydrogel, indicating that the hydrogel had no cytotoxicity. Consequently, the novel p(APBA-b-LAMA) hydrogel has a practical application for diabetes treatment.

Enzymatically crosslinked gelatin hydrogel promotes the proliferation of adipose tissue-derived stromal cells

Gelatin hydrogel crosslinked by microbial transglutaminase (mTG) exhibits excellent performance in cell adhesion, proliferation, and differentiation. We examined the gelation time and gel strength of gelatin/mTG hydrogels in various proportions to investigate their physical properties and tested their degradation performances in vitro. Cell morphology and viability of adipose tissue-derived stromal cells (ADSCs) cultured on the 2D gel surface or in 3D hydrogel encapsulation were evaluated by immunofluorescence staining. Cell proliferation was tested via Alamar Blue assay. To investigate the hydrogel effect on cell differentiation, the cardiac-specific gene expression levelsof Nkx2.5, Myh6, Gja1, and Mef2c in encapsulated ADSCs with or without cardiac induction medium were detected by real-time RT-PCR. Cell release from the encapsulated status and cell migration in a 3D hydrogel model were assessed in vitro. Results show that the gelatin/mTG hydrogels are not cytotoxic and that their mechanical properties are adjustable. Hydrogel degradation is related to gel concentration and the resident cells. Cell growth morphology and proliferative capability in both 2D and 3D cultures were mainly affected by gel concentration. PCR result shows that hydrogel modulus together with induction medium affects the cardiac differentiation of ADSCs. The cell migration experiment and subcutaneous implantation show that the hydrogels are suitable for cell delivery.

Rapid Fabrication of a Cell-Seeded Collagen Gel-Based Tubular Construct that Withstands Arterial Pressure : Rapid Fabrication of a Gel-Based Media Equivalent

Based on plastically compressed cell-seeded collagen gels, we fabricated a small-diameter tubular construct that withstands arterial pressure without prolonged culture in vitro. Specifically, to mimic the microstructure of vascular media, the cell-seeded collagen gel was uniaxially stretched prior to plastic compression to align collagen fibers and hence cells in the gel. The resulting gel sheet was then wrapped around a custom-made multi-layered braided tube to form aligned tubular constructs whereas the gel sheet prepared similarly but without uniaxial stretching formed control constructs. With the braided tube, fluid in the gel construct was further removed by vacuum suction aiming to consolidate the concentric layers of the construct. The construct was finally treated with transglutaminase. Both SEM and histology confirmed the absence of gaps in the wall of the construct. Particularly, cells in the wall of the aligned tubular construct were circumferentially aligned. The enzyme-mediated crosslinking increased burst pressure of both the constructs significantly; the extent of the increase of burst pressure for the aligned tubular construct was greater than that for the control counterpart. Increasing crosslinking left the compliance of the aligned tubular construct unchanged but reduced that of the control construct. Cells remained viable in transglutaminase-treated plastically compressed gels after 6 days in culture. This study demonstrated that by combining stretch-induced fiber alignment, plastic compression, and enzyme-mediated crosslinking, a cell-seeded collagen gel-based tubular construct with potential to be used as vascular media can be made within 3 days.

Rheological, biocompatibility and osteogenesis assessment of fish collagen scaffold for bone tissue engineering

In the present investigation, an attempt was made to find an alternative to mammalian collagen with better osteogenesis ability. Three types of collagen scaffolds - collagen, collagen-chitosan (CCH), and collagen-hydroxyapatite (CHA) - were prepared from the cartilage of Blue shark and investigated for their physico-functional and mechanical properties in relation to biocompatibility and osteogenesis. CCH scaffold was superior with pH 4.5-4.9 and viscosity 9.7-10.9cP. Notably, addition of chitosan and HA (hydroxyapatite) improved the stiffness (11-23MPa) and degradation rate but lowered the water binding capacity and porosity of the scaffold. Interestingly, CCH scaffolds remained for 3days before complete in-vitro biodegradation. The decreased amount of viable T-cells and higher level of FAS/APO-1 were substantiated the biocompatibility properties of prepared collagen scaffolds. Osteogenesis study revealed that the addition of CH and HA in both fish and mammalian collagen scaffolds could efficiently promote osteoblast cell formation. The ALP activity was significantly high in CHA scaffold-treated osteoblast cells, which suggests an enhanced bone-healing process. Therefore, the present study concludes that the composite scaffolds prepared from fish collagen with higher stiffness, lower biodegradation rate, better biocompatible, and osteogenesis properties were suitable biomaterial for a bone tissue engineering application as an alternative to mammalian collagen scaffolds.

Modulating In Vivo Degradation Rate of Injectable Extracellular Matrix Hydrogels

Extracellular matrix (ECM) derived hydrogels are increasingly used as scaffolds to stimulate endogenous repair. However, few studies have examined how altering the degradation rates of these materials affect cellular interaction in vivo. This study sought to examine how crosslinking or matrix metalloproteinase (MMP) inhibition by doxycycline could be employed to modulate the degradation rate of an injectable hydrogel derived from decellularized porcine ventricular myocardium. While both approaches were effective in reducing degradation in vitro, only doxycycline significantly prolonged hydrogel degradation in vivo without affecting material biocompatibility. In addition, unlike crosslinking, incorporation of doxycycline into the hydrogel did not affect mechanical properties. Lastly, the results of this study highlighted the need for development of novel crosslinkers for in situ modification of injectable ECM-derived hydrogels, as none of the crosslinking agents investigated in this study were both biocompatible and effective.

Enzymes as Green Catalysts for Precision Macromolecular Synthesis

The present article comprehensively reviews the macromolecular synthesis using enzymes as catalysts. Among the six main classes of enzymes, the three classes, oxidoreductases, transferases, and hydrolases, have been employed as catalysts for the in vitro macromolecular synthesis and modification reactions. Appropriate design of reaction including monomer and enzyme catalyst produces macromolecules with precisely controlled structure, similarly as in vivo enzymatic reactions. The reaction controls the product structure with respect to substrate selectivity, chemo-selectivity, regio-selectivity, stereoselectivity, and choro-selectivity. Oxidoreductases catalyze various oxidation polymerizations of aromatic compounds as well as vinyl polymerizations. Transferases are effective catalysts for producing polysaccharide having a variety of structure and polyesters. Hydrolases catalyzing the bond-cleaving of macromolecules in vivo, catalyze the reverse reaction for bond forming in vitro to give various polysaccharides and functionalized polyesters. The enzymatic polymerizations allowed the first in vitro synthesis of natural polysaccharides having complicated structures like cellulose, amylose, xylan, chitin, hyaluronan, and chondroitin. These polymerizations are "green" with several respects; nontoxicity of enzyme, high catalyst efficiency, selective reactions under mild conditions using green solvents and renewable starting materials, and producing minimal byproducts. Thus, the enzymatic polymerization is desirable for the environment and contributes to "green polymer chemistry" for maintaining sustainable society.

Manipulation of in vitro collagen matrix architecture for scaffolds of improved physiological relevance

Type I collagen is a versatile biomaterial that is widely used in medical applications due to its weak antigenicity, robust biocompatibility, and its ability to be modified for a wide array of applications. As such, collagen has become a major component of many tissue engineering scaffolds, drug delivery platforms, and substrates for in vitro cell culture. In these applications, collagen constructs are fabricated to recapitulate a diverse set of conditions. Collagen fibrils can be aligned during or post-fabrication, cross-linked via numerous techniques, polymerized to create various fibril sizes and densities, and copolymerized into a wide array of composite scaffolds. Here, we review approaches that have been used to tune collagen to better recapitulate physiological environments for use in tissue engineering applications and studies of basic cell behavior. We discuss techniques to control fibril alignment, methods for cross-linking collagen constructs to modulate stiffness, and composite collagen constructs to better mimic physiological extracellular matrix.

An injectable, in situ forming type II collagen/hyaluronic acid hydrogel vehicle for chondrocyte delivery in cartilage tissue engineering

In this study, chondrocytes were encapsulated into an injectable, in situ forming type II collagen/hyaluronic acid (HA) hydrogel cross-linked with poly(ethylene glycol) ether tetrasuccinimidyl glutarate (4SPEG) and supplemented with the transforming growth factor β1 (TGFβ1). The chondrocyte-hydrogel constructs were cultured in vitro for 7 days and studied for cell viability and proliferation, morphology, glycosaminoglycan production, and gene expression. Type II collagen/HA/4SPEG formed a strong and stable hydrogel, and the chondrocytes remained viable during the encapsulation process and for the 7-day culture period. In addition, the encapsulated cells showed spherical morphology characteristic for chondrocytic phenotype. The cells were able to produce glycosaminoglycans into their extracellular matrix, and the gene expression of type II collagen and aggrecan, genes specific for differentiated chondrocytes, increased over time. The results indicate that the studied composite hydrogel with incorporated chondrogenic growth factor TGFβ1 is able to maintain chondrocyte viability and characteristics, and thus, it can be regarded as potential injectable cell delivery vehicle for cartilage tissue engineering.

To cross-link or not to cross-link? Cross-linking associated foreign body response of collagen-based devices

Collagen-based devices, in various physical conformations, are extensively used for tissue engineering and regenerative medicine applications. Given that the natural cross-linking pathway of collagen does not occur in vitro, chemical, physical, and biological cross-linking methods have been assessed over the years to control mechanical stability, degradation rate, and immunogenicity of the device upon implantation. Although in vitro data demonstrate that mechanical properties and degradation rate can be accurately controlled as a function of the cross-linking method utilized, preclinical and clinical data indicate that cross-linking methods employed may have adverse effects on host response, especially when potent cross-linking methods are employed. Experimental data suggest that more suitable cross-linking methods should be developed to achieve a balance between stability and functional remodeling.

Biomimetic materials for medical application through enzymatic modification

Living organisms synthesize functional materials, based on proteins and polysaccharides, using enzyme-catalyzed reactions. According to the biomimetic approach, biomaterial matrices for tissue engineering are designed to be able to mimic the properties and the functions of the extracellular matrix (ECM). In this chapter, the most significant research efforts dedicated to the study and the preparation of biomimetic materials through enzymatic modifications were reviewed. The functionalizations of different polymeric matrices obtained through the catalytic activity of two enzymes (Transglutaminase, TGase and Tyrosinase, TYRase) were discussed. Specifically, the biomimetic applications of TGase and TYRase to confer appropriate biomimetic properties to the biomaterials, such as the possibility to obtain in situ gelling hydrogels and the incorporation of bioactive molecules (growth factors) and cell-binding peptides into the scaffolds, were reviewed.

Cellular contractility and extracellular matrix stiffness regulate matrix metalloproteinase activity in pancreatic cancer cells

The pathogenesis of cancer is often driven by local invasion and metastasis. Recently, mechanical properties of the tumor microenvironment have been identified as potent regulators of invasion and metastasis, while matrix metalloproteinases (MMPs) are classically known as significant enhancers of cancer cell migration and invasion. Here we have been able to sensitively measure MMP activity changes in response to specific extracellular matrix (ECM) environments and cell contractility states. Cells of a pancreatic cancer cell line, Panc-1, up-regulate MMP activities between 3- and 10-fold with increased cell contractility. Conversely, they down-regulate MMP activities when contractility is blocked to levels seen with pan-MMP activity inhibitors. Similar, albeit attenuated, responses are seen in other pancreatic cancer cell lines, BxPC-3 and AsPC-1. In addition, MMP activity was modulated by substrate stiffness, collagen gel concentration, and the degree of collagen cross-linking, when cells were plated on collagen gels ranging from 0.5 to 5 mg/ml that span the physiological range of substrate stiffness (50-2000 Pa). Panc-1 cells showed enhanced MMP activity on stiffer substrates, whereas BxPC-3 and AsPC-1 cells showed diminished MMP activity. In addition, eliminating heparan sulfate proteoglycans using heparinase completely abrogated the mechanical induction of MMP activity. These results demonstrate the first functional link between MMP activity, contractility, and ECM stiffness and provide an explanation as to why stiffer environments result in enhanced cell migration and invasion.

Tunable elastin-like polypeptide hollow sphere as a high payload and controlled delivery gene depot

Self-assembly driven processes can be utilized to produce a variety of nanostructures useful for various in vitro and in vivo applications. Characteristics such as size, stability, biocompatibility, high therapeutic loading and controlled delivery of these nanostructures are particularly crucial in relation to in vivo applications. In this study, we report the fabrication of tunable monodispersed elastin-like polypeptide (ELP) hollow spheres of 100, 300, 500 and 1000 nm by exploiting the self-assembly property and net positive charge of ELP. The microbial transglutaminase (mTGase) cross-linking provided robustness and stability to the hollow spheres while maintaining surface functional groups for further modifications. The resulting hollow spheres showed a higher loading efficiency of plasmid DNA (pDNA) by using polyplex (~70 μg pDNA/mg of hollow sphere) than that of self-assembled ELP particles and demonstrated controlled release triggered by protease and elastase. Moreover, polyplex-loaded hollow spheres showed better cell viability than polyplex alone and yielded higher luciferase expression by providing protection against endosomal degradation. Overall, the monodispersed, tunable hollow spheres with a capability of post-functionalization can provide an exciting new opportunity for use in a range of therapeutic and diagnostic applications.

Fabrication and repair of cartilage defects with a novel acellular cartilage matrix scaffold

The objectives of this study were to develop a three-dimensional acellular cartilage matrix (ACM) and investigate its possibility for use as a scaffold in cartilage tissue engineering. Bovine articular cartilage was decellularized sequentially with trypsin, nuclease solution, hypotonic buffer, and Triton x 100 solution; molded with freeze-drying process; and cross-linked by ultraviolet irradiation. Histological and biochemical analysis showed that the ACM was devoid of cells and still maintained the collagen and glycosaminoglycan components of cartilage. Scanning electronic microscopy and mercury intrusion porosimetry showed that the ACM had a sponge-like structure of high porosity. The ACM scaffold had good biocompatibility with cultured rabbit bone marrow mesenchymal stem cells with no indication of cytotoxicity both in contact and in extraction assays. The cartilage defects repair in rabbit knees with the mesenchymal stem cell-ACM constructs had a significant improvement of histological scores when compared to the control groups at 6 and 12 weeks. In summary, the ACM possessed the characteristics that afford it as a potential scaffold for cartilage tissue engineering.

Biofabrication with Biopolymers and Enzymes: Potential for Constructing Scaffolds from Soft Matter

Purpose

Regenerative medicine will benefit from technologies capable of fabricating soft matter to have appropriate architectures and that provide the necessary physical, chemical and biological cues to recruit cells and guide their development. The goal of this report is to review an emerging set of biofabrication techniques and suggest how these techniques could be applied for the fabrication of scaffolds for tissue engineering.

Methods

Electrical potentials are applied to submerged electrodes to perform cathodic and anodic reactions that direct stimuli-responsive film-forming polysaccharides to assemble into hydrogel films. Standard methods are used to microfabricate electrode surfaces to allow the electrical signals to be applied with spatial and temporal control. The enzymes mushroom tyrosinase and microbial transglutaminase are used to catalyze macromolecular grafting and crosslinking of proteins.

Results

Electrodeposition of the polysaccharides chitosan and alginate allow hydrogel films to be formed in response to localized electrical signals. Co-deposition of various components (e.g., proteins, vesicles and cells), and subsequent electrochemical processing allow the physical, chemical and biological activities of these films to be tailored. Enzymatic processing allows for the generation of stimuli-responsive protein conjugates that can also be directed to assemble in response to imposed electrical signals. Further, enzyme-catalyzed crosslinking of gelatin allows replica molding of soft matter to create hydrogel films with topological structure.

Conclusions

Biofabrication with biological materials and mechanisms provides new approaches for soft matter construction. These methods may enable the formation of tissue engineering scaffolds with appropriate architectures, assembled cells, and spatially organized physical, chemical and biological cues.

Amine functionalization of collagen matrices with multifunctional polyethylene glycol systems

A method to functionalize collagen-based biomaterials with free amine groups was established in an attempt to improve their potential for tethering of bioactive molecules. Collagen sponges were incorporated with amine-terminated multifunctional polyethylene glycol (PEG) derivatives after N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide and N-hydroxysuccinimide (EDC/NHS) cross-linking. The extent of the incorporation of different amounts and different numbers of active moieties of amine-terminated PEG systems into the collagen scaffolds was evaluated using ninhydrin assay, Fourier transform infrared spectrophotometry (FTIR), collagenase degradation assay, denaturation temperature measurements, and in vitro cell studies. A 3% 8-arm amine-terminated PEG was found to be the minimum required effective concentration to functionalize EDC/NHS stabilized collagen scaffolds. EDC/NHS stabilized scaffolds treated with 3% 8-arm amine-terminated PEG exhibited significantly improved denaturation temperature and resistance to collagenase degradation over non-cross-linked scaffolds (p < 0.002). Biological evaluation using 3T3 cells demonstrated that the produced scaffolds facilitated maintenance of the cells' morphology, metabolic activity, and ability to proliferate in vitro. Overall, our results indicate that amine-terminated PEG systems can be used as means to enhance the functionality of collagenous structures.

Cross-linking of type I collagen with microbial transglutaminase: identification of cross-linking sites

Collagen is a popular biomaterial. To deal with its lack of thermal stability and its weak resistance to proteolytic degradation, collagen-based materials are stabilized via different cross-linking procedures. Regarding the potential toxicity of residual cross-linking agents, enzyme-mediated cross-linking would provide an alternative and nontoxic method for collagen stabilization. The results of this study show that type I collagen is a substrate for mTG. However, epsilon-(gamma-glutamyl)lysine cross-links are only incorporated at elevated temperatures when the protein is partially or completely denatured. A maximum number of 5.4 cross-links per collagen monomer were found for heat-denatured collagen. Labeling with the primary amine monodansylcadaverine revealed that at least half of the cross-links are located within the triple helical region of the collagen molecule. Because the triple helix is highly ordered in its native state, this finding might explain why the glutamine residues are inaccessible for mTG under nondenaturing conditions.

Biomaterial design strategies for the treatment of spinal cord injuries

The highly debilitating nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials that can stimulate cellular regeneration and functional recovery. Many experts agree that the greatest hope for treatment of spinal cord injuries will involve a combinatorial approach that integrates biomaterial scaffolds, cell transplantation, and molecule delivery. This manuscript presents a comprehensive review of biomaterial-scaffold design strategies currently being applied to the development of nerve guidance channels and hydrogels that more effectively stimulate spinal cord tissue regeneration. To enhance the regenerative capacity of these two scaffold types, researchers are focusing on optimizing the mechanical properties, cell-adhesivity, biodegradability, electrical activity, and topography of synthetic and natural materials, and are developing mechanisms to use these scaffolds to deliver cells and biomolecules. Developing scaffolds that address several of these key design parameters will lead to more successful therapies for the regeneration of spinal cord tissue.

An in situ and in vitro investigation for the transglutaminase potential in tissue engineering

Transglutaminases (TGases) constitute a family of enzymes that stabilize protein assemblies by gamma-glutamyl-epsilon-lysine crosslinks. The role of tissue transglutaminase (TGase 2) in several pathophysiologies, wound healing applications, biomaterials functionalization, and drug delivery systems provides grounds for its use in tissue engineering. Herein, we initially studied the endogenous TGase activity and expression under normal (skin, duodenum, colon, and small bowel) and pathophysiological (keloid scar) conditions on cadaveric human tissues. Successful inhibition was achieved using low concentrations of BOC-DON-QIV-OMe (0.1 mM and 1 mM for normal skin and keloid scar, respectively), iodoacetamide (0.1 mM and 1 mM for normal skin and keloid scar, respectively), and cystamine dihydrochloride (1 mM and 10 mM for normal skin and keloid scar, respectively), whilst di-BOC-cystamine was found ineffective even at 100 mM concentration. Secondly, the addition of exogenous guinea pig liver transglutaminase (gpTGase) onto the inhibited tissues and collagen scaffolds was studied, and results presented advocate its use as potential tissue adhesive and drug delivery tool. However, the investigation of its crosslinking extent using second harmonic generation microscopy and differentially scanning calorimetry revealed rather poor stabilization function. Overall, our study indicates that TGase 2 has a role as a biological glue to consolidate various micro-structural components of tissues and biomaterials.

Kinetic characterization and comparison of various protein crosslinking reagents for matrix modification

We have characterized the relative efficacies of a number of protein crosslinking agents that have the potential for use in the crosslinking of proteinaceous matrices both in vitro and in vivo. The crosslinkers tested were; L: -threose (LT), Genipin (GP), Methylglyoxal (MG), 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC), proanthrocyanidin (PA) and glutaraldehyde (GA). The relative effectiveness of the crosslinkers with regard to their saturating concentrations was: GA > PA > EDC > MG = GP >> LT. Most of the crosslinkers displayed a pH dependence and were more effective at more alkaline pH. At optimal pH and saturating conditions, the relative reaction rates of the crosslinkers were: PA = GA > EDC > GP > MG >> LT.

The effect of laminin peptide gradient in enzymatically cross-linked collagen scaffolds on neurite growth

Guided neurite growth is critical in both peripheral nervous system and central nervous system nerve regeneration. Scaffolds that provide structural and guidance cues for neuronal cells have a potential role in neural regeneration application. Type I collagen is suitable to be processed as an engineered scaffold for nerve regeneration because of its biological and structural properties. A few previous studies have shown that cross-linking of collagen scaffolds with microbial transglutaminase improves the mechanical strength and degradation properties of the scaffolds. It was shown that laminin 5 can regulate neurite outgrowth and extension. A motif (PPFLMLLKGSTR) in the human laminin 5 alpha 3 chain is crucial for both integrin alpha 3 beta 1 receptor binding and cell adhesion. In the present work, we studied the guidance effect of a laminin peptide (PPFLMLLKGSTR) gradient in collagen and cross-linked collagen scaffolds on neurite growth. Neurites of rat pheochromocytoma (PC12) cells showed a preferential growth toward the high laminin concentration level on the collagen scaffold, while the incorporation of laminin peptide in the scaffold did not influence neurite length of PC12 cells.

Type II collagen levels correlate with mineralization by articular cartilage vesicles

OBJECTIVE

Pathologic mineralization is common in osteoarthritic (OA) cartilage and may be mediated by extracellular organelles known as articular cartilage vesicles (ACVs). Paradoxically, ACVs isolated from OA human cartilage mineralize poorly in vitro compared with those isolated from normal porcine cartilage. We recently showed that collagens regulate ACV mineralization. We sought to determine differences between collagens and collagen receptors on human and porcine ACVs as a potential explanation of their different mineralization behaviors.

METHODS

ACVs were enzymatically released from old and young human and porcine hyaline articular cartilage. Western blotting was used to determine the presence of types I, II, VI, and X collagen and various collagen receptors on ACVs. Type II collagen was quantified by enzyme-linked immunosorbent assay. Biomineralization was assessed by measuring the uptake of (45)Ca by isolated ACVs in agarose gels and by ACVs in situ in freeze-thawed cartilage.

RESULTS

As previously shown, isolated human ACVs mineralized poorly in response to ATP compared with porcine ACVs, but human and porcine ACVs mineralized similarly in situ in freeze-thawed cartilage. Type II collagen levels were 100-fold higher in isolated human ACVs than in porcine ACVs. Type II collagen in human ACVs was of high molecular weight. Transglutaminase-crosslinked type II collagen showed increased resistance to collagenase, suggesting a possible explanation for residual collagen on human ACVs. Expression of other collagens and collagen receptors was similar on human and porcine ACVs.

CONCLUSION

Higher levels of type II collagen in human ACV preparations, perhaps mediated by increased transglutaminase crosslinking, may contribute to the decreased mineralization observed in isolated human ACVs in vitro.

Tissue transglutaminase enhances collagen type II-induced arthritis and modifies the immunodominant T-cell epitope CII260-270

The calcium-dependent enzyme tissue transglutaminase (tTG) is associated with diverse biological functions, such as induction of apoptosis, modeling of the extracellular matrix, receptor-mediated endocytosis, cell growth and differentiation, cell adhesion and signal transduction. Also, it may deamidate glutamine residues to glutamic acid and catalyze cross-linking of proteins. In this study, we have investigated the impact of tTG for posttranslational modifications and cross-linking of the immunodominant T-cell epitope CII260-270 and their effects on the collagen-induced arthritis, an animal model for rheumatoid arthritis. By using mass spectrometry analysis and hybridoma assays, we have demonstrated that tTG could perform both types of modifications (deamidation and cross-link formation) on the immunodominant T-cell epitope CII259-273. Replacement of the glutamine at position 267 with glutamic acid leads to a decreased binding affinity to MHC II. T cells recognized both non-modfied (Q(267)) and modified (E(267)) CII259-273-peptides. We also show that administration of tTG leads to increased incidence, severity and histopathological manifestations of collagen-induced arthritis in mice. Moreover, we conclude that both processes, deamidation and cross-linking, are involved in the tTG-catalyzed reactions, and in vivo administration of tTG enhances arthritis severity and joint destruction in mice.

Injectable biomaterials for regenerating complex craniofacial tissues

Engineering complex tissues requires a precisely formulated combination of cells, spatiotemporally released bioactive factors, and a specialized scaffold support system. Injectable materials, particularly those delivered in aqueous solution, are considered ideal delivery vehicles for cells and bioactive factors and can also be delivered through minimally invasive methods and fill complex 3D shapes. In this review, we examine injectable materials that form scaffolds or networks capable of both replacing tissue function early after delivery and supporting tissue regeneration over a time period of weeks to months. The use of these materials for tissue engineering within the craniofacial complex is challenging but ideal as many highly specialized and functional tissues reside within a small volume in the craniofacial structures and the need for minimally invasive interventions is desirable due to aesthetic considerations. Current biomaterials and strategies used to treat craniofacial defects are examined, followed by a review of craniofacial tissue engineering, and finally an examination of current technologies used for injectable scaffold development and drug and cell delivery using these materials.

Tailored laminin-332 alpha3 sequence is tethered through an enzymatic linker to a collagen scaffold to promote cellular adhesion

Surface modification techniques have been used to develop biomimetic scaffolds by incorporating cell adhesion peptides, which facilitates cell adhesion, migration and proliferation. In this study, we evaluated the cell adhesion properties of a tailored laminin-332 alpha3 chain tethered to a type I collagen scaffold using microbial transglutaminase (mTGase) by incorporating transglutaminase substrate peptide sequences containing either glutamine (peptide A: PPFLMLLKGSTREAQQIVM) or lysine (peptide B: PPFLMLLKGSTRKKKKG). The degree of cross-linking was studied by amino acid analysis following proteolytic digestion and the structural changes in the modified scaffold further investigated using Fourier transform infrared spectroscopy and atomic force microscopy. Fibroblasts were used to evaluate the cellular behaviour of the functionalized collagen scaffold. mTGase supports cell growth but tethering of peptide A and peptide B to the mTGase cross-linked collagen scaffold caused a significant increase in cell proliferation when compared with native and mTGase cross-linked collagen scaffolds. Both peptides enabled cell-spreading, attachment and normal actin cytoskeleton organization with slight increase in the cell proliferation was observed in peptide A when compared with the peptide B and mTGase cross-linked scaffold. An increase in the amount of epsilon(gamma-glutamyl) lysine isopeptide was observed in peptide A conjugated scaffolds when compared with peptide B conjugated scaffolds, mTGase cross-linked scaffold without peptide. Changes in D-spacing were observed in the cross-linked scaffolds with tethered peptides. These results demonstrate that mTGase can play a bifunctional role in both conjugation of the glutamine and lysine containing peptide sequences and also in the cross-linking of the collagen scaffold, thus providing a suitable substrate for cell growth.

The treatment of collagen fibrils by tissue transglutaminase to promote vascular smooth muscle cell contractile signaling

The enzyme tissue transglutaminase 2 (TG2) appears to play an important role in several physiological processes such as wound healing, the progression of cancer and of vascular disease. Additionally, TG2 has been proposed as a means of stabilizing collagen extracellular matrix (ECM) scaffolds for tissue engineering applications. In this report, we examined the effect of TG2 treatment on the mechanical properties of the ECM, and associated cell responses. Using a model ECM of fibrillar collagen, we quantitatively examined vascular smooth muscle cell (vSMC) response to untreated, or TG2 treated collagen. We show that cells respond to TG2 treated collagen with increased spreading, an increase in contractile response as indicated by elevated F-actin polymerization and myosin light chain phosphorylation, and increased proliferation, without apparent changes in integrin specificity or matrix topography. Comparative atomic force microscopy loading studies indicate that TG2 treated fibrils are 3 times more resistant to shearing force from an AFM tip than untreated fibrils. The data suggest that TG2 treatment of collagen increases matrix mechanical stiffness, which apparently alters the contractile and proliferative response of vSMC.

Tethering a laminin peptide to a crosslinked collagen scaffold for biofunctionality

Cell adhesion peptide regulates various cellular functions like proliferation, attachment, and spreading. The cellular response to laminin peptide (PPFLMLLKGSTR), a motif of laminin-5 alpha3 chain, tethered to type I collagen, crosslinked using microbial transglutaminase (mTGase) was investigated. mTGase is an enzyme that initiates crosslinking by reacting with the glutamine and lysine residues on the collagen fibers stabilizing the molecular structure. In this study that tethering of the laminin peptide in a mTGase crosslinked collagen scaffold enhanced cell proliferation and attachment. Laminin peptide tethered crosslinked scaffold showed unaltered cell morphology of 3T3 fibroblasts when compared with collagen and crosslinked scaffold. The triple helical structure of collagen remained unaltered by the addition of laminin peptide. In addition a dose-dependent affinity of the laminin peptide towards collagen was seen. The degree of crosslinking was measured by amino acid analysis, differential scanning calorimeter and fourier transform infrared spectroscopy. Increased crosslinking was observed in mTGase crosslinked group. mTGase crosslinking showed higher shrinkage temperature. There was alteration in the fibrillar architecture due to the crosslinking activity of mTGase. Hence, the use of enzyme-mediated linking shows promise in tethering cell adhesive peptides through biodegradable scaffolds.

In vitro characterization of a collagen scaffold enzymatically cross-linked with a tailored elastin-like polymer

Collagen, the main structural component of the extracellular matrix (ECM), provides tensile stiffness to different structures and organs against rupture. However, collagen tissue-engineered implants are hereto still lacking in mechanical strength. Attempts to create stiffer scaffolds have resulted in increased brittleness of the material, reducing the versatility of the original component. The hypothesis behind this research is that the introduction of an elastic element in the scaffold will enhance the mechanical properties of the collagen-based scaffolds, as elastin does in the ECM to prevent irreversible deformation. In this study, an elastin-like polymer (ELP) designed and synthesized using recombinant DNA methodology is used with the view to providing increased proteolytic resistance and increased functionality to the scaffolds by carrying specific sequences for microbial transglutaminase cross-linking, endothelial cell adhesion, and drug delivery. Evaluation of the effects that cross-linking ELP-collagen has on the physicochemical properties of the scaffold such as porosity, presence of cross-linking, thermal behavior, and mechanical strength demonstrated that the introduction of enzymatically resistant covalent bonds between collagen and ELP increases the mechanical strength of the scaffolds in a dose-dependent manner without significantly affecting the porosity or thermal properties of the original scaffold. Importantly, the scaffolds also showed selective behavior, in a dose (ELP)-dependent manner toward human umbilical vein endothelial cells and smooth muscle cells when compared to fibroblasts.

Perspective on biomaterials used in the surgical treatment of morbid obesity

Morbid obesity is defined as having a body mass index greater than or equal to 40.0 kg m(-2), or 37.0 kg m(-2) with comorbidities. Bariatric surgery remains the most effective treatment for morbid obesity. Bariatric procedures such as sleeve gastrectomy, vertical banded gastroplasty and adjustable gastric banding all generate excess body-weight loss typically over 3-5 years. The biomaterials used during these procedures, namely silicone, polypropylene, expanded polytetrafluoroethylene and titanium, are all non-degradable biomaterials. Hence, their presence in vivo exceeds the functional requirement of an implant to treat morbid obesity. Accordingly, research into non-invasive and reversible surgical procedures has increased, particularly in light of the dramatic increase in paediatric obesity. Tissue engineering is an alternative approach to treat morbid obesity, as it incorporates both engineering and biological principles into the design and development of an implant to surgically treat morbid obesity. It is hypothesized that a biodegradable polymer to treat morbid obesity could be developed to effectively promote excess weight loss. The aim of this review is to discuss morbid obesity with regards to its aetiology, prevalence and current modalities of treatment. Specifically, the shortcomings of the biomaterials currently used to surgically treat morbid obesity shall be reviewed, and alternative biomaterials shall be proposed.

Transglutaminase 2 cross-linking of matrix proteins: biological significance and medical applications

This review summarises the functions of the enzyme tissue transglutaminase (TG2) in the extracellular matrix (ECM) both as a matrix stabiliser through its protein cross-linking activity and as an important cell adhesion protein involved in cell survival. The contribution of extracellular TG2 to the pathology of important diseases such as cancer and fibrosis are discussed with a view to the potential importance of TG2 as a therapeutic target. The medical applications of TG2 are further expanded by detailing the use of transglutaminase cross-linking in the development of novel biocompatible biomaterials for use in soft and hard tissue repair.

Enhancing amine terminals in an amine-deprived collagen matrix

Collagen, though widely used as a core biomaterial in many clinical applications, is often limited by its rapid degradability which prevents full exploitation of its potential in vivo. Polyamidoamine (PAMAM) dendrimer, a highly branched macromolecule, possesses versatile multiterminal amine surface groups that enable them to be tethered to collagen molecules and enhance their potential. In this study, we hypothesized that incorporation of PAMAM dendrimer in a collagen matrix through cross-linking will result in a durable, cross-linked collagen biomaterial with free -NH 2 groups available for further multi-biomolecular tethering. The aim of this study was to assess the physicochemical properties of a G1 PAMAM cross-linked collagen matrix and its cellular sustainability in vitro. Different amounts of G1 PAMAM dendrimer (5 or 10 mg) were integrated into bovine-derived collagen matrices through a cross-linking process, mediated by 5 or 25 mM 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) in 5 mM N-hydroxysuccinimide (NHS) and 50 mM 2-morpholinoethane sulfonic acid buffer at pH 5.5. The physicochemical properties of resultant matrices were investigated with scanning electron microscopy (SEM), collagenase degradation assay, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectra, and ninhydrin assay. Cellular sustainability of the matrices was assessed with Alamar Blue assay and SEM. There was no significant difference in cellular behavior between the treated and nontreated groups. However, the benefit of incorporating PAMAM in the cross-linking reaction was limited when higher concentrations of either agent were used. These results confirm the hypothesis that PAMAM dendrimer can be incorporated in the collagen cross-linking process in order to modulate the properties of the resulting cross-linked collagen biomaterial with free -NH 2 groups available for multi-biomolecular tethering.