Crosslinked three-dimensional demineralized bone matrix for the adipose-derived stromal cell proliferation and differentiation

Development of photoreactive demineralized bone matrix 3D printing colloidal inks for bone tissue engineering

Demineralized bone matrix (DBM) has been widely used clinically for dental, craniofacial and skeletal bone repair, as an osteoinductive and osteoconductive material. 3D printing (3DP) enables the creation of bone tissue engineering scaffolds with complex geometries and porosity. Photoreactive methacryloylated gelatin nanoparticles (GNP-MAs) 3DP inks have been developed, which display gel-like behavior for high print fidelity and are capable of post-printing photocrosslinking for control of scaffold swelling and degradation. Here, novel DBM nanoparticles (DBM-NPs, ∼400 nm) were fabricated and characterized prior to incorporation in 3DP inks. The objectives of this study were to determine how these DBM-NPs would influence the printability of composite colloidal 3DP inks, assess the impact of ultraviolet (UV) crosslinking on 3DP scaffold swelling and degradation and evaluate the osteogenic potential of DBM-NP-containing composite colloidal scaffolds. The addition of methacryloylated DBM-NPs (DBM-NP-MAs) to composite colloidal inks (100:0, 95:5 and 75:25 GNP-MA:DBM-NP-MA) did not significantly impact the rheological properties associated with printability, such as viscosity and shear recovery or photocrosslinking. UV crosslinking with a UV dosage of 3 J/cm2 directly impacted the rate of 3DP scaffold swelling for all GNP-MA:DBM-NP-MA ratios with an ∼40% greater increase in scaffold area and pore area in uncrosslinked versus photocrosslinked scaffolds over 21 days in phosphate-buffered saline (PBS). Likewise, degradation (hydrolytic and enzymatic) over 21 days for all DBM-NP-MA content groups was significantly decreased, ∼45% less in PBS and collagenase-containing PBS, in UV-crosslinked versus uncrosslinked groups. The incorporation of DBM-NP-MAs into scaffolds decreased mass loss compared to GNP-MA-only scaffolds during collagenase degradation. An in vitro osteogenic study with bone marrow-derived mesenchymal stem cells demonstrated osteoconductive properties of 3DP scaffolds for the DBM-NP-MA contents examined. The creation of photoreactive DBM-NP-MAs and their application in 3DP provide a platform for the development of ECM-derived colloidal materials and tailored control of biochemical cue presentation with broad tissue engineering applications.

Photobiomodulation: An Effective Approach to Enhance Proliferation and Differentiation of Adipose-Derived Stem Cells into Osteoblasts

Osteoporosis is regarded as the most common chronic metabolic bone condition in humans. In osteoporosis, bone mesenchymal stem cells (MSCs) have reduced cellular function. Regenerative medicine using adipose-derived stem cell (ADSC) transplantation can promote the growth and strength of new bones, improve bone stability, and reduce the risk of fractures. Various methods have been attempted to differentiate ADSCs to functioning specialized cells for prospective clinical application. However, commonly used therapies have resulted in damage to the donor site and morbidity, immune reactions, carcinogenic generation, and postoperative difficulties. Photobiomodulation (PBM) improves ADSC differentiation and proliferation along with reducing clinical difficulties such as treatment failures to common drug therapies and late initiation of treatment. PBM is a noninvasive, nonthermal treatment that encourages cells to produce more energy and to undergo self-repair by using visible green and red and invisible near-infrared (NIR) radiation. The use of PBM for ADSC proliferation and differentiation has been widely studied with multiple outcomes observed due to laser fluence and wavelength dependence. In this article, the potential for differentiating ADSCs into osteoblasts and the various methods used, including biological induction, chemical induction, and PBM, will be addressed. Likewise, the optimal laser parameters that could improve the proliferation and differentiation of ADSC, translating into clinical success, will be commented on.

Effects of hybridization of decellularized allogenic nerves with adipose-derive stem cell sheets to facilitate nerve regeneration

We developed a sheet of stem cells derived from adipose tissue (ADSC sheet). To improve transplantation, we wrapped decellularized nerves with ADSC sheets and examined the efficacy of this recellularized nerves in nerve regeneration. Decellularized nerves were prepared from sciatic nerves of Sprague-Dawley rats. Wistar rats were subjected to sciatic nerve injury and then randomly assigned to three groups (n = 7 per group), which were transplanted with 15-mm bridge grafts; the first group received a decellularized allogenic nerve implant, the second an ADSC sheet-wrapped decellularized allogenic nerve implant, and the third an autogenous nerves were implant. No significant differences were found in S100-positive and neurofilament-positive areas, axon density, and sciatic functional index (SFI) score between rats transplanted with ADSC sheet-wrapped nerve grafts and those that received autografts. In contrast, these parameters except SFI and the amplitude ratio were significantly larger in rats grafted with ADSC sheet-wrapped nerve than with the decellularized nerve. These results suggest that the number of regenerating axons, as well as their regenerating velocity, and the number of migrating Schwann cells into the implant in rats transplanted with ADSC sheet-wrapped nerves matched those in rats transplanted with autografts. These positive effects are possibly attributable to secretion of growth factors of ADSCs.

Restoration of mandibular bone defects with demineralized bone matrix combined with three-dimensional cultured bone marrow-derived mesenchymal stem cells in minipig models

Mandibular defects, caused by congenital, pathological or iatrogenic insults, can significantly affect patient quality of life. The reconstruction of mandible has recently gained the interest of clinical and tissue engineering researchers. The purpose of this study was to evaluate the effectiveness of three-dimensional (3-D) cultured autologous grafts prepared using bone marrow-derived mesenchymal stem cells (BMSCs) combined with demineralized bone matrix (DBM) scaffolds for the restoration of mandibular defects. Cylindrical defects were created in the mandibular body of minipigs and filled with 3D-cultured BMSCs/DBM autografts, 2D-cultured BMSCs/DBM autografts, DBM material (without cells), or were left unfilled (blank). Using computed tomographic (CT) imaging and histological staining, we found that treatment of mandibular defects using 3-D cultured BMSCs/DBM autografts offered improvements in bone formation over both 2-D cultured autografts and cell-free DBM scaffolds. We found increased osteoid formation in 3D and 2D cultures, with more osteogenic cells present in the 3D constructs. We suggest that 3-D cultured homograft BMSCs combined with DBM scaffolds represents a new strategy for bone reconstruction, with potential future clinical applicability.

Human Neural Stem/Progenitor Cells Derived From Epileptic Human Brain in a Self-Assembling Peptide Nanoscaffold Improve Traumatic Brain Injury in Rats

Traumatic brain injury (TBI) is a disruption in the brain functions following a head trauma. Cell therapy may provide a promising treatment for TBI. Among different cell types, human neural stem cells cultured in self-assembling peptide scaffolds have been suggested as a potential novel method for cell replacement treatment after TBI. In the present study, we accessed the effects of human neural stem/progenitor cells (hNS/PCs) derived from epileptic human brain and human adipose-derived stromal/stem cells (hADSCs) seeded in PuraMatrix hydrogel (PM) on brain function after TBI in an animal model of brain injury. hNS/PCs were isolated from patients with medically intractable epilepsy undergone epilepsy surgery. hNS/PCs and hADSCs have the potential for proliferation and differentiation into both neuronal and glial lineages. Assessment of the growth characteristics of hNS/PCs and hADSCs revealed that the hNS/PCs doubling time was significantly longer and the growth rate was lower than hADSCs. Transplantation of hNS/PCs and hADSCs seeded in PM improved functional recovery, decreased lesion volume, inhibited neuroinflammation, and reduced the reactive gliosis at the injury site. The data suggest the transplantation of hNS/PCs or hADSCs cultured in PM as a promising treatment option for cell replacement therapy in TBI.

Adipose stem cells for bone tissue repair

Adipose-derived stem/stromal cells (ASCs), together with adipocytes, vascular endothelial cells, and vascular smooth muscle cells, are contained in fat tissue. ASCs, like the human bone marrow stromal/stem cells (BMSCs), can differentiate into several lineages (adipose cells, fibroblast, chondrocytes, osteoblasts, neuronal cells, endothelial cells, myocytes, and cardiomyocytes). They have also been shown to be immunoprivileged, and genetically stable in long-term cultures. Nevertheless, unlike the BMSCs, ASCs can be easily harvested in large amounts with minimal invasive procedures. The combination of these properties suggests that these cells may be a useful tool in tissue engineering and regenerative medicine.

The combination of three-dimensional and rotary cell culture system promotes the proliferation and maintains the differentiation potential of rat BMSCs

Bone marrow mesenchymal stem cells (BMSCs) are a good candidate for tissue engineering and clinical application. One of the challenges in its cell therapy is how to quickly obtain an adequate number of seed cells and meanwhile maintain suitable differentiation potential. In this study we combined three-dimensional (3D) collagen porous scaffolds with rotary cell culture system (RCCS) (RCCS-3D) to create a stereoscopic dynamic environment for the amplification of rat BMSCs in vitro. The results revealed that this RCCS-3D system could enhance BMSCs' proliferation and colony formation, as well as maintain the differentiation potential compared with conventional static two-dimensional (2D) and 3D cell culture conditions. In addition, high-throughput microarray analysis showed that gene expressions of RCCS-3D system displayed significant differences in cell proliferation and differentiation compared with static-2D conditions. Thus, RCCS-3D system could provide an effective means for BMSCs cell proliferation in vitro and meanwhile maintain differentiation potential in tissue engineering.

Suppression of osteoblast-related genes during osteogenic differentiation of adipose tissue derived stromal cells

Recent studies indicated a lower osteogenic differentiation potential of adipose tissue-derived stromal cells (ASCs) compared to bone marrow derived mesenchymal stromal cells. The aim of this study was to evaluate the effects of potent combinations of highly osteogenic bone morphogenetic proteins (BMPs) in order to enhance the osteogenic differentiation potential of ASCs. Human ASCs were cultured for 10 days in the presence of osteogenic medium consisting of dexamethasone, ß-glycerophosphate and ascorbat-2-phosphate (OM) supplemented with BMP-2, BMP-6, BMP-9+IGF-2 and BMP-2,-6,-9 (day 1+2: 50 ng/ml, days 3-6: 100 ng/ml, days 7-10: 200 ng/ml). The formation of the osteoblast phenotype was evaluated by quantification of osteoblast-related marker genes using real-time polymerase chain reaction (RT-PCR). Matrix mineralization was assessed by Alizarin Red S staining. Statistical analysis was carried out using the one-way analysis of variance (ANOVA) followed by the Scheffe's post hoc procedure. Osteogenic medium (OM) significantly increased the expression of alkaline phosphatase (ALP) and osteocalcin (p < 0.05) and led to a stable matrix mineralization. Under the influence of BMP-9+IGF-2 and BMP-2,-6,-9 the ALP expression further increased compared to ASCs cultured with OM only (p < 0.01). However, multiple osteogenic markers showed no change or decreased under the influence of OM and BMP combinations (p < 0.05). The current results indicate a restricted osteogenic differentiation potential of ASCs and suggest careful reconsideration of their use in bone tissue engineering applications.

Demineralized Bone Matrix Scaffolds Modified by CBD-SDF-1α Promote Bone Regeneration via Recruiting Endogenous Stem Cells

The reconstruction of bone usually depends on substitute transplantation, which has drawbacks including the limited bone substitutes available, comorbidity, immune rejection, and limited endogenous bone regeneration. Here, we constructed a functionalized bone substitute by combining application of the demineralized bone matrix (DBM) and collagen-binding stromal-cell-derived factor-1α (CBD-SDF-1α). DBM was a poriferous and biodegradable bone substitute, derived from bovine bone and consisting mainly of collagen. CBD-SDF-1α could bind to collagen and be controllably released from the DBM to mobilize stem cells. In a rat femur defect model, CBD-SDF-1α-modified DBM scaffolds could efficiently mobilize CD34⁺ and c-kit⁺ endogenous stem cells homing to the injured site at 3 days after implantation. According to the data from micro-CT, CBD-SDF-1α-modified DBM scaffolds could help the bone defects rejoin with mineralization accumulated and bone volume expanded. Interestingly, osteoprotegerin (OPG) and osteopontin (OPN) were highly expressed in CBD-SDF-1α group at an early time after implantation, while osteocalcin (OCN) was more expanded. H&E and Masson's trichrome staining showed that the CBD-SDF-1α-modified DBM scaffold group had more osteoblasts and that the bone defect rejoined earlier. The ultimate strength of the regenerated bone was investigated by three-point bending, showing that the CBD-SDF-1α group had superior strength. In conclusion, CBD-SDF-1α-modified DBM scaffolds could promote bone regeneration by recruiting endogenous stem cells.

Isolation and culture of primary rat adipose derived stem cells using porous biopolymer microcarriers

Adipose-derived stem cells (ADSCs) are an attractive source of material for mesenchymal stem cell research due to the abundance of adipose and relative ease of access compared with bone marrow. A key consideration for research is whether cell isolation methods can be improved, to reduce the process steps needed to isolate and expand cell material. In the current study, we used macroporous biopolymer microcarriers to isolate primary ADSCs. We found that the method was capable of isolating ADSCs that were subsequently capable of being transferred to culture dishes and expanded in vitro. Moreover, flow cytometry revealed that they expressed typical stem cell markers and were capable of undergoing tri-lineage differentiation. In summary, it is feasible to use biopolymer microcarriers for retrieval of viable ADSCs that retain identity markers of stem cell function.

In Vitro Effects of Strontium on Proliferation and Osteoinduction of Human Preadipocytes

Development of tools to be used for in vivo bone tissue regeneration focuses on cellular models and differentiation processes. In searching for all the optimal sources, adipose tissue-derived mesenchymal stem cells (hADSCs or preadipocytes) are able to differentiate into osteoblasts with analogous characteristics to bone marrow mesenchymal stem cells, producing alkaline phosphatase (ALP), collagen, osteocalcin, and calcified nodules, mainly composed of hydroxyapatite (HA). The possibility to influence bone differentiation of stem cells encompasses local and systemic methods, including the use of drugs administered systemically. Among the latter, strontium ranelate (SR) represents an interesting compound, acting as an uncoupling factor that stimulates bone formation and inhibits bone resorption. The aim of our study was to evaluate the in vitro effects of a wide range of strontium (Sr(2+)) concentrations on proliferation, ALP activity, and mineralization of a novel finite clonal hADSCs cell line, named PA20-h5. Sr(2+) promoted PA20-h5 cell proliferation while inducing the increase of ALP activity and gene expression as well as HA production during in vitro osteoinduction. These findings indicate a role for Sr(2+) in supporting bone regeneration during the process of skeletal repair in general, and, more specifically, when cell therapies are applied.

Layer-by-layer paper-stacking nanofibrous membranes to deliver adipose-derived stem cells for bone regeneration

Bone tissue engineering through seeding of stem cells in three-dimensional scaffolds has greatly improved bone regeneration technology, which historically has been a constant challenge. In this study, we researched the use of adipose-derived stem cell (ADSC)-laden layer-by-layer paper-stacking polycaprolactone/gelatin electrospinning nanofibrous membranes for bone regeneration. Using this novel paper-stacking method makes oxygen distribution, nutrition, and waste transportation work more efficiently. ADSCs can also secrete multiple growth factors required for osteogenesis. After the characterization of ADSC surface markers CD29, CD90, and CD49d using flow cytometry, we seeded ADSCs on the membranes and found cells differentiated, with significant expression of the osteogenic-related proteins osteopontin, osteocalcin, and osteoprotegerin. During 4 weeks in vitro, the ADSCs cultured on the paper-stacking membranes in the osteogenic medium exhibited the highest osteogenic-related gene expressions. In vivo, the paper-stacking scaffolds were implanted into the rat calvarial defects (5 mm diameter, one defect per parietal bone) for 12 weeks. Investigating with microcomputer tomography, the ADSC-laden paper-stacking membranes showed the most significant bone reconstruction, and from a morphological perspective, this group occupied 90% of the surface area of the defect, produced the highest bone regeneration volume, and showed the highest bone mineral density of 823.06 mg/cm(3). From hematoxylin and eosin and Masson staining, the new bone tissue was most evident in the ADSC-laden scaffold group. Using quantitative polymerase chain reaction analysis from collected tissues, we found that the ADSC-laden paper-stacking membrane group presented the highest osteogenic-related gene expressions of osteocalcin, osteopontin, osteoprotegerin, bone sialoprotein, runt-related transcription factor 2, and osterix (two to three times higher than the control group, and 1.5 times higher than the paper-stacking membrane group in all the genes). It is proposed that ADSC-laden layer-by-layer paper-stacking scaffolds could be used as a way of promoting bone defect treatment.

Bladder acellular matrix conjugated with basic fibroblast growth factor for bladder regeneration

Basic fibroblast growth factor (bFGF) plays an important role in wound repair and tissue regeneration. Considerable research has been focused on the exploration of bFGF delivery systems for maintaining efficient local concentration at the injury sites. In this study, bFGF was chemically crosslinked to the bladder acellular matrix (BAM) to create specific binding between bFGF and BAM. The BAM scaffold conjugated with bFGF (CL-BAM/bFGF) could bind more bFGF and achieve controlled release of bFGF, which promoted human fibroblasts to proliferate in vitro and accelerated cellularization and vascularization after subcutaneous implantation. Using the rat bladder reconstruction model, the CL-BAM/bFGF group showed better tissue regeneration compared with the other groups. In summary, CL-BAM/bFGF could prevent the diffusion of bFGF from BAM and maintain its activity. Thus, the scaffold conjugated with growth factor systems could be an effective way for maintaining local therapy dosage at the target site in wound repair and tissue regeneration.

Three-dimensional hydrogel scaffolds facilitate in vitro self-renewal of human skin-derived precursors

Skin-derived precursors (SKPs) are multipotent cells with dermal stem cell properties. These easily available cells possess the capacity to reconstitute the skin in vivo, as well as a broader differentiation potential in vitro, which endows them with great prospects in regenerative medicine. However, the present authors' group and others previously found that adult human SKPs (hSKPs) expanded deficiently in vitro, which largely counteracted their research and practical values. Taking the physiological micro-environment of hSKPs into consideration, the authors sought to establish a hydrogel scaffold-based three-dimensional (3-D) culture system for hSKPs in the present study. After comparing their morphology, growth characteristics, signature gene expression and differentiation potential in different hydrogels, the present authors found that a chemically defined hyaluronic acid and denatured collagen-based hydrogel system that mimicked the natural niche of hSKPs in the dermis could alleviate hSKP senescence, support hSKP proliferation as spheres, while largely retaining their properties and potential. This study suggested that recapitulating the in vivo stem cell niche by providing them with 3-D extracellular matrix environments could help them achieve better self-renewal in vitro. In addition, the animal-origin-free and biocompatible 3-D hydrogel system will certainly benefit fundamental research and clinical applications of hSKPs in the near future.

A novel method to apply osteogenic potential of adipose derived stem cells in orthopaedic surgery

Background

A number of publications have reported that adipose derived stem cells (ADSCs) have the capacity to be induced to differentiate into osteoblasts both in vitro and in vivo. However, it has been difficult to use separate ADSCs for cortical bone regeneration and bone reconstruction so far. Inspired by the research around stromal stem cells and cell sheets, we developed a new method to fabricate ADSCs sheets to accelerate and enhance the bone regeneration and bone reconstruction.

Purpose

To fabricate ADSCs sheets and evaluate their capacity to be induced to differentiate to osteoblasts in vitro.

Methods

Human adipose derived stem cells (hADSCs) were employed in this research. The fabricating medium containing 50 µM ascorbate-2-phosphate was used to enhance the secretion of collagen protein by the ADSCs and thus to make the cell sheets of ADSCs. As the separate ADSCs were divided into osteo-induction group and control group, the ADSCs sheets were also divided into two groups depending on induction by osteogenesis medium or no induction. The osteogenic capacity of each group was evaluated by ALP staining, Alizarin Red staining and ALP activity.

Results

The ADSCs sheets were fabricated after one-week culture in the fabricating medium. The ALP staining of ADSCs sheets showed positive results after 5 days osteo-induction and the Alizarin Red staining of ADSCs sheets showed positive results after 1 week osteo-induction. The ALP activity showed significant differences between these four groups. The ALP activity of ADSCs sheets groups showed higher value than that of separate ADSCs.

Conclusion

The experiments demonstrated that ADSCs sheets have better capacity than separate ADSCs to be induced to differentiate into osteoblasts. This indicates that it is possible to use the ADSCs sheets as a source of mesenchymal stem cells for bone regeneration and bone reconstruction.

Myocardial transfection of hypoxia-inducible factor-1α and co-transplantation of mesenchymal stem cells enhance cardiac repair in rats with experimental myocardial infarction

Introduction

Mesenchymal stem cells (MSCs) have potential for the treatment of myocardial infarction. However, several meta-analyses revealed that the outcome of stem cell transplantation is dissatisfactory. A series of studies demonstrated that the combination of cell and gene therapy was a promising strategy to enhance therapeutic efficiency. The aim of this research is to investigate whether and how the combination of overexpression of hypoxia-inducible factor-1α (HIF-1α) and co-transplantation of mesenchymal stem cells can enhance cardiac repair in myocardial infarction.

Methods

We investigated the therapeutic effects of myocardial transfection of HIF-1α and co-transplantation of MSCs on cardiac repair in myocardial infarction by using myocardial transfection of HIF-1α via an adenoviral vector. Myocardial infarction was produced by coronary ligation in Sprague-Dawley (SD) rats. Animals were divided randomly into six groups: (1) HIF-1α + MSCs group: Ad-HIF-1α (6 × 10⁹ plate forming unit) and MSCs (1 × 10⁶) were intramyocardially injected into the border zone simultaneously; (2) HIF-1α group: Ad-HIF-1α (6 × 10⁹ plate forming unit) was injected into the border zone; (3) HIF-1α-MSCs group: Ad-HIF-1α transfected MSCs (1 × 10⁶) were injected into the border zone; (4) MSCs group: MSCs (1 × 10⁶) were injected into the border zone; (5) Control group: same volume of DMEM was injected; (6) SHAM group. Cardiac performance was then quantified by echocardiography as well as molecular and pathologic analysis of heart samples in the peri-infarcted region and the infarcted region at serial time points. The survival and engraftment of transplanted MSCs were also assessed.

Results

Myocardial transfection of HIF-1α combined with MSC transplantation in the peri-infarcted region improved cardiac function four weeks after myocardial infarction. Significant increases in vascular endothelial growth factor (VEGF) and stromal cell-derived factor-1α (SDF-1α) expression, angiogenesis and MSC engraftment, as well as decreased cardiomyocyte apoptosis in peri-infarcted regions in the hearts of the HIF-1α + MSCs group were detected compared to the MSCs group and Control group.

Conclusions

These findings suggest that myocardial transfection of HIF-1α and co-transplantation of mesenchymal stem cells enhance cardiac repair in myocardial infarction, indicating the feasibility and preliminary safety of a combination of myocardial transfection of HIF-1α and MSC transplantation to treat myocardial infarction.

Effects of different scaffolds on rat adipose tissue derived stroma cells

BACKGROUND

Adipose tissue derived stroma cells (ASC's) offer for many advantages for tissue engineering strategies over mesenchymal stroma cells from other sources and ideal carrier materials have to be identified for them. The aim of this study was to demonstrate and to compare the effects of three clinically established biomaterials on proliferation and metabolic activity of rat ASC's in vitro.

MATERIALS AND METHODS

Rat adipose tissue derived stroma cells (ASC's) were isolated and differentiated into distinct lineages proved by lineage specific staining and gene expression analysis (RT-PCR). The biomaterials Bio-Gide(®), Tutodent(®) Membrane and Belotero(®) Soft were tested with rat ASC's for their biocompatibility using scanning electron microscopy (SEM), cell vitality staining, cytotoxicity and proliferation tests (LDH, MTT, BrdU, WST-1).

RESULTS

The collagen membrane Bio-Gide(®) resulted in a significantly higher viability and proliferation (WST-1, BrdU) compared to Tutodent(®) Membrane. No significant difference was determined in the LDH and MTT test. The hyaluronic acid gel Belotero(®) Soft showed no cytotoxicity (LDH, FDA/PI) and had no negative effects on metabolic activity (WST-1, MTT) or cell proliferation (BrdU) of ASC's.

CONCLUSION

Our results indicate Bio-Gide(®) and Belotero(®) Soft as preferable carrier materials for ASC's. For the further establishment of ASC's-based treatment strategies, in vivo investigations on the tissue regeneration potential of these cell-biomaterial scaffolds should follow.

Transplantation of human mesenchymal stem cells loaded on collagen scaffolds for the treatment of traumatic brain injury in rats

Studies have suggested that mesenchymal stem cells (MSCs) have therapeutic effects following traumatic brain injury (TBI). However, cell distribution and survival rate are two major barriers to their success as therapeutic treatment. The improvement of cell therapy using collagen delivery matrices had been reported. However, we know very little about the mechanisms. We labeled human bone marrow-derived mesenchymal stem cells (hMSCs) with a positron emission tomography (PET) tracer, 18F-fluoro-2-deoxy-D-glucose (FDG). hMSCs were transplanted with or without collagen scaffolds into rats with experimental TBI and the whole-body nuclear images were compared. Collagen scaffolds increased the retention of hBMSC in the lesion site and limited its distribution at the transplanted region. Significantly more hMSCs were detected in the brain when transplanted with collagen scaffolds. The results showed collagen scaffolds also efficiently improved cell survival and neurite outgrowth in vivo, resulting in better neural functional recovery. In addition, brain metabolism also improved in the collagen scaffold implanted group, as evaluated by PET. We speculated that collagen scaffolds would improve early engraftment and support the survival of grafted cells post-transplantation.

Osteodifferentiation of human preadipocytes induced by strontium released from hydrogels

In recent years, there has been an increasing interest in interactive application principles of biology and engineering for the development of valid biological systems for tissue regeneration, such as for the treatment of bone fractures or skeletal defects. The application of stem cells together with biomaterials releasing bioactive factors promotes the formation of bone tissue by inducing proliferation and/or cell differentiation. In this study, we used a clonal cell line from human adipose tissue-derived mesenchymal stem cells (hADSCs or preadipocytes), named PA2-E12, to evaluate the effects of strontium (Sr²⁺) released in the culture medium from an amidated carboxymethylcellulose (CMCA) hydrogel enriched with different Sr²⁺ concentrations on osteodifferentiation. The osteoinductive effect was evaluated through both the expression of alkaline phophatase (ALP) activity and the hydroxyapatite (HA) production during 42 days of induction. Present data have shown that Sr²⁺ released from CMCA promotes the osteodifferentiation induced by an osteogenic medium as shown by the increase of ALP activity at 7 and 14 days and of HA production at 14 days. In conclusion, the use of biomaterials able to release in situ osteoinductive agents, like Sr²⁺, could represent a new strategy for future applications in bone tissue engineering.

Stem cells, mature adipocytes, and extracellular scaffold: what does each contribute to fat graft survival?

BACKGROUND

Soft tissue engineering offers new perspectives for improving fat graft survival, for which the appropriate association of cells and scaffold seems essential. This study aimed to analyze the survival of free-cell grafts compared with adipose-derived stem cells (ASCs) seeded on collagen scaffolds.

METHODS

Adipose tissue from a single volunteer was used for the following preparations: purified adipose tissue, isolated mature adipocytes (free-cell graft), cultured ASCs without scaffold (free-cell graft), collagen scaffold only, cultured ASCs in collagen scaffold without and with bioactive factors, and freshly-isolated ASCs in collagen scaffold. These were grafted on 18 nude mice for 2 months, after which specimens were evaluated grossly and histologically using hematoxylin-phloxine-safran (HPS), Oil-Red-O, and antivimentin labeling. Specimens and animals were weighed before implantation and after explantation, and weight values were statistically analyzed.

RESULTS

Free-cell grafts (mature adipocytes and free ASCs) showed complete resorption in 50 and 60% of the animals (remaining weight fraction was 22.5 and 5.3%, respectively). The survival of purified adipose tissue was 81.8% (statistically greater compared with free-cell grafts; p < 0.05). In the ASCs-scaffold association, the remaining weight fractions (87.3-70.4%) were statistically greater than in free-cell grafts (5.3-22.5%; p < 0.05), but the difference between ASC-scaffolds and fat grafts was not statistically significant. These results were confirmed by clinical and histologic observations.

CONCLUSION

Three-dimensional collagen scaffolds seem to improve survival of ASCs compared with free-cell grafts (adipocytes and free ASCs).

Isolation of mouse mesenchymal stem cells with normal ploidy from bone marrows by reducing oxidative stress in combination with extracellular matrix

BACKGROUND

Isolation of mouse MSCs (mMSCs) with normal ploidy from bone marrow remains challenging. mMSCs isolated under 20% O(2) are frequently contaminated by overgrown hematopoietic cells, and could also be especially vulnerable to oxidative damage, resulting in chromosomal instability. Culture under low oxygen or extracellular matrix (ECM) improves proliferation of MSCs in several species. We tested the hypothesis that culture under low oxygen in combination with ECM prepared from mouse embryonic fibroblast (MEF-ECM) could be used to purify proliferative mMSCs, and to reduce oxidative damage and maintain their chromosomal stability.

RESULTS

Optimization of culture conditions under 20% O(2) resulted in immortalization of mMSCs, showing extensive chromosome abnormalities, consistent with previous studies. In contrast, culture under low oxygen (2% O(2)) improved proliferation of mMSCs and reduced oxidative damage, such that mMSCs were purified simply by plating at low density under 2% O(2). MEF-ECM reduced oxidative damage and enhanced proliferation of mMSCs. However, these isolated mMSCs still exhibited high frequency of chromosome abnormalities, suggesting that low oxygen or in combination with MEF-ECM was insufficient to fully protect mMSCs from oxidative damage. Notably, antioxidants (alpha -phenyl-t-butyl nitrone (PBN) and N-acetylcysteine (NAC)) further reduced DNA damage and chromosomal abnormalities, and increased proliferation of mMSCs. mMSCs isolated by the combination method were successfully used to generate induced pluripotent stem (iPS) cells by ectopic expression of Oct4, Sox2, Klf4 and c-Myc.

CONCLUSIONS

We have developed a technique that allows to reduce the number of karyotypic abnormalities for isolation of primary mMSCs and for limited culture period by combination of low oxygen, MEF-ECM, antioxidants and low density plating strategy. The effectiveness of the new combination method is demonstrated by successful generation of iPS cells from the isolated mMSCs. However, a culture system for mMSCs still is needed to prevent all the anomalies, especially after a long-term culture period.

Stem cells from adipose tissue

This is a review of the growing scientific interest in the developmental plasticity and therapeutic potential of stromal cells isolated from adipose tissue. Adipose-derived stem/stromal cells (ASCs) are multipotent somatic stem cells that are abundant in fat tissue. It has been shown that ASCs can differentiate into several lineages, including adipose cells, chondrocytes, osteoblasts, neuronal cells, endothelial cells, and cardiomyocytes. At the same time, adipose tissue can be harvested by a minimally invasive procedure, which makes it a promising source of adult stem cells. Therefore, it is believed that ASCs may become an alternative to the currently available adult stem cells (e.g. bone marrow stromal cells) for potential use in regenerative medicine. In this review, we present the basic information about the field of adipose-derived stem cells and their potential use in various applications.

Development of Photocrosslinkable Urethane-Doped Polyester Elastomers for Soft Tissue Engineering

Finding an ideal biomaterial with the proper mechanical properties and biocompatibility has been of intense focus in the field of soft tissue engineering. This paper reports on the synthesis and characterization of a novel crosslinked urethane-doped polyester elastomer (CUPOMC), which was synthesized by reacting a previously developed photocrosslinkable poly (octamethylene maleate citrate) (POMC) prepolymers (pre-POMC) with 1,6-hexamethylene diisocyanate (HDI) followed by thermo- or photo-crosslinking polymerization. The mechanical properties of the CUPOMCs can be tuned by controlling the molar ratios of pre-POMC monomers, and the ratio between the prepolymer and HDI. CUPOMCs can be crosslinked into a 3D network through polycondensation or free radical polymerization reactions. The tensile strength and elongation at break of CUPOMC synthesized under the known conditions range from 0.73±0.12MPa to 10.91±0.64MPa and from 72.91±9.09% to 300.41±21.99% respectively. Preliminary biocompatibility tests demonstrated that CUPOMCs support cell adhesion and proliferation. Unlike the pre-polymers of other crosslinked elastomers, CUPOMC pre-polymers possess great processability demonstrated by scaffold fabrication via a thermally induced phase separation method. The dual crosslinking methods for CUPOMC pre-polymers should enhance the versatile processability of the CUPOMC used in various conditions. Development of CUPOMC should expand the choices of available biodegradable elastomers for various biomedical applications such as soft tissue engineering.

Human adipose-derived side population stem cells cultured on demineralized bone matrix for bone tissue engineering

BACKGROUND

Tissue engineering of new bone relies on the combination and application of osteoconductive, osteoinductive, and osteogenic elements. Natural scaffolds, such as demineralized bone matrix (DBM), contain collagenous networks with growth factors such as bone morphogenetic protein-2. Stem cells from readily available sources, including discarded adipose tissue, have the propensity to differentiate into bone. The present study examines a multi-component technique consisting of a novel side population of adipose stem cells cultured on DBM for tissue engineering applications.

METHODS

Adipose-derived side population stem cells were cultured on DBM for up to 14 days. Cell proliferation, alkaline phosphatase activity, extracellular matrix protein production, and calcium-containing mineral deposit formation were assayed. Ectopic bone formation in a rat model was also evaluated.

RESULTS

Side population stem cells attached to and proliferated on DBM while generating markers of new bone formation. When these cell/substrate composites were implanted into an ectopic model, newly formed bone was 30% greater than that of DBM alone.

CONCLUSIONS

Novel populations of adipose-derived stem cells cultured on DBM compose a system that develops new bone matrix in vitro and in vivo. This strategy provides a novel approach using naturally occurring materials for bone repair in tissue engineering applications.

The use of decellularized adipose tissue to provide an inductive microenvironment for the adipogenic differentiation of human adipose-derived stem cells

The development of an engineered adipose tissue substitute, capable of supporting reliable, predictable, and complete fat tissue formation, would be of significant value in the fields of plastic and reconstructive surgery. Towards the goal of engineering an optimized microenvironment for adipogenesis, a decellularization strategy was developed for adipose tissue, which yielded 3-D scaffolds with preserved extracellular matrix architecture. A significant volume of scaffolding material could be obtained from a human tissue source that is commonly discarded. Histology, immunohistochemistry, and scanning electron microscopy confirmed the efficacy and reproducibility of the approach, and also indicated that the basement membrane was conserved in the processed matrix, including laminin and collagen type IV. Seeding experiments with human adipose-derived stem cells indicated that the decellularized adipose tissue (DAT) provided an inductive microenvironment for adipogenesis, supporting the expression of the master regulators PPARgamma and CEBPalpha, without the need for exogenous differentiation factors. High levels of adipogenic gene expression and glycerol-3-phosphate dehydrogenase activity were observed in the induced DAT scaffolds, as compared to cells grown in monolayer or cell aggregate culture. The protein data emphasized the importance of the cell donor source in the development of tissue-engineering strategies for large-volume soft tissue regeneration.