Proliferation and differentiation of mesenchymal stem cell on collagen sponge reinforced with polypropylene/polyethylene terephthalate blend fibers

Drug eluting protein and polysaccharides-based biofunctionalized fabric textiles- pioneering a new frontier in tissue engineering: An extensive review

In the ever-evolving landscape of tissue engineering, medicated biotextiles have emerged as a game-changer. These remarkable textiles have garnered significant attention for their ability to craft tissue scaffolds that closely mimic the properties of natural tissues. This comprehensive review delves into the realm of medicated protein and polysaccharide-based biotextiles, exploring a diverse array of fabric materials. We unravel the intricate web of fabrication methods, ranging from weft/warp knitting to plain/stain weaving and braiding, each lending its unique touch to the world of biotextiles creation. Fibre production techniques, such as melt spinning, wet/gel spinning, and multicomponent spinning, are demystified to shed light on the magic behind these ground-breaking textiles. The biotextiles thus crafted exhibit exceptional physical and chemical properties that hold immense promise in the field of tissue engineering (TE). Our review underscores the myriad applications of drug-eluting protein and polysaccharide-based textiles, including TE, tissue repair, regeneration, and wound healing. Additionally, we delve into commercially available products that harness the potential of medicated biotextiles, paving the way for a brighter future in healthcare and regenerative medicine. Step into the world of innovation with medicated biotextiles-where science meets the art of healing.

Gene Therapy for Regenerative Medicine

The development of biological methods over the past decade has stimulated great interest in the possibility to regenerate human tissues. Advances in stem cell research, gene therapy, and tissue engineering have accelerated the technology in tissue and organ regeneration. However, despite significant progress in this area, there are still several technical issues that must be addressed, especially in the clinical use of gene therapy. The aims of gene therapy include utilising cells to produce a suitable protein, silencing over-producing proteins, and genetically modifying and repairing cell functions that may affect disease conditions. While most current gene therapy clinical trials are based on cell- and viral-mediated approaches, non-viral gene transfection agents are emerging as potentially safe and effective in the treatment of a wide variety of genetic and acquired diseases. Gene therapy based on viral vectors may induce pathogenicity and immunogenicity. Therefore, significant efforts are being invested in non-viral vectors to enhance their efficiency to a level comparable to the viral vector. Non-viral technologies consist of plasmid-based expression systems containing a gene encoding, a therapeutic protein, and synthetic gene delivery systems. One possible approach to enhance non-viral vector ability or to be an alternative to viral vectors would be to use tissue engineering technology for regenerative medicine therapy. This review provides a critical view of gene therapy with a major focus on the development of regenerative medicine technologies to control the in vivo location and function of administered genes.

Nanohydroxyapatite incorporated photocrosslinked gelatin methacryloyl/poly(ethylene glycol)diacrylate hydrogel for bone tissue engineering

The development of novel strategies that aim to augment the regenerative potential of bone is critical for devising better treatment options for bone defects or injuries. Facilitation of bone repair and regeneration utilizing composite hydrogels that simulates bone matrix is emerging as a viable approach in bone tissue engineering. The present study aimed to develop nanohydroxyapatite-incorporated gelatin methacryloyl (GelMA)/poly(ethylene glycol) diacrylate (PEGDA) hydrogel (GMPH hydrogel). A facile blending and photocrosslinking approach was employed to incorporate nanohydroxyapatite into the inter-crosslinked polymeric hydrogel network to obtain an ECM mimicking matrix for assisting bone tissue regeneration. Chemical characterization of GelMA and the GMPH hydrogel was carried out using FTIR and ¹H NMR. Physical properties of GMPH, such as gelation, swelling and degradation ratios, and internal morphology, signified the suitability of GMPH hydrogel for tissue engineering. Cell viability assay demonstrated a healthy proliferation of MG63 osteoblast cells in GMPH hydrogel extracted growth medium, indicating the hydrogel's cytocompatibility and suitability for bone tissue engineering. Our study documented the fabrication of a novel GelMA/PEGDA-nanohydroxyapatite hydrogel that possesses ideal physicochemical and biological properties for bone tissue engineering.

Characteristics and clinical potential of a cellularly modified gelatin sponge

BACKGROUND

Human umbilical cord mesenchymal stem cells (HuMSCs) injected directly have been proven effective for improving chronic wounds. However, HuMSCs largely die within 14 days. The aim of study is to establish a cellularly modified gelatin sponge and investigate its characteristics and clinical potential.

METHODS

HuMSCs were isolated, expanded and seeded in a poly-L-lysine (PLL)-coated gelatin sponge. Fabricated gelatin sponges were estimated through observation of morphological surface and ultrastructure, following confirmed by histology method. Supernatants were collected at different times for enzyme-linked immunosorbent assays (ELISAs) to measure growth factors. The cell embedded gelatin sponges were implanted subcutaneously on the backs of mice and the samples were harvested and studied histologically.

RESULTS

HuMSCs gradually modified the gelatin sponge by depositing collagen and hyaluronic acid, and degrading the structure of gelatin, resulting in a dense, and elastic structure. Compared with cells cultured in monolayer, the levels of growth factors increased remarkably when HuMSCs were cultivated in the gelatin sponge. Upon subcutaneous implantation in the backs of mice, the cellularized gelatin sponges persisted for up to 2 months and eventually integrated into the host tissue, while blank gelatin sponges degraded completely by the end of the second month.

CONCLUSION

Gelatin sponge is a clinically accessible scaffold for HuMSCs implantation to maintain short-term survival of the cells and high-level production of growth factors, which demonstrates good clinical potential for enhancing wound healing.

Construction and application of textile-based tissue engineering scaffolds: a review

Tissue engineering (TE) provides a practicable method for tissue and organ repair or substitution. As the most important component of TE, a scaffold plays a critical role in providing a growing environment for cell proliferation and functional differentiation as well as good mechanical support. And the restorative effects are greatly dependent upon the nature of the scaffold including the composition, morphology, structure, and mechanical performance. Medical textiles have been widely employed in the clinic for a long time and are being extensively investigated as TE scaffolds. However, unfortunately, the advantages of textile technology cannot be fully exploited in tissue regeneration due to the ignoring of the diversity of fabric structures. Therefore, this review focuses on textile-based scaffolds, emphasizing the significance of the fabric design and the resultant characteristics of cell behavior and extracellular matrix reconstruction. The structure and mechanical behavior of the fabrics constructed by various textile techniques for different tissue repairs are summarized. Furthermore, the prospect of structural design in the TE scaffold preparation was anticipated, including profiled fibers and some unique and complex textile structures. Hopefully, the readers of this review would appreciate the importance of structural design of the scaffold and the usefulness of textile-based TE scaffolds in tissue regeneration.

Current progress in hepatic tissue regeneration by tissue engineering

Liver, as a vital organ, is responsible for a wide range of biological functions to maintain homeostasis and any type of damages to hepatic tissue contributes to disease progression and death. Viral infection, trauma, carcinoma, alcohol misuse and inborn errors of metabolism are common causes of liver diseases are a severe known reason for leading to end-stage liver disease or liver failure. In either way, liver transplantation is the only treatment option which is, however, hampered by the increasing scarcity of organ donor. Over the past years, considerable efforts have been directed toward liver regeneration aiming at developing new approaches and methodologies to enhance the transplantation process. These approaches include producing decellularized scaffolds from the liver organ, 3D bio-printing system, and nano-based 3D scaffolds to simulate the native liver microenvironment. The application of small molecules and micro-RNAs and genetic manipulation in favor of hepatic differentiation of distinct stem cells could also be exploited. All of these strategies will help to facilitate the application of stem cells in human medicine. This article reviews the most recent strategies to generate a high amount of mature hepatocyte-like cells and updates current knowledge on liver regenerative medicine.

Efficacy of mechanical vibration in regulating mesenchymal stem cells gene expression

This study aimed at investigating the expression of osteoblast and chondrocyte-related genes in mesenchymal stem cells (MSCs), derived from rabbit adipose tissue, under mechanical vibration. The cells were placed securely on a vibrator's platform and subjected to 300 Hz of sinusoidal vibration, with a maximum amplitude of 10 μm, for 45 min per day, and for 14 consequent days, in the absence of biochemical reagents. The negative control group was placed in the conventional culture medium with no mechanical loading. The expression of osteoblast and chondrocyte-related genes was investigated using real-time polymerase chain reaction (real-time PCR). In addition, F-actin fiber structure and alignment with the help of actin filament fluorescence staining were evaluated, and the level of metabolic activity of MSCs was determined by the methyl thiazolyl tetrazolium assay. The real-time PCR study showed a significant increase of bone gene expression in differentiated cells, compared with MSCs (P < 0.05). On the other hand, the level of chondrocyte gene expression was not remarkable. Applying mechanical vibration enhanced F-actin fiber structure and made them aligned in a specific direction. It was also found that during the differentiation process, the metabolic activity of the cells increased (P < 0.05). The results of this work are in agreement with the well-accepted fact that the MSCs, in the absence of growth factors, are sensitive to low-amplitude, high-frequency vibration. Outcomes of this work can be applied in cell therapy and tissue engineering, when regulation of stem cells is required.

Bone defect healing is induced by collagen sponge/polyglycolic acid

We have evaluated the capability of a collagen/poly glycolic acid (PGA) scaffold in regeneration of a calvarial bone defects in rabbits. 4 bone critical size defects (CSD) were created in the calvarial bone of each rabbit. The following 4 treatment modalities were tested (1) a collagen/PGA scaffold (0.52% w/w); (2) the collagen/PGA scaffold (0.52% w/w) seeded with adipose-derived mesenchymal stem cells (AD-MSCs, 1 × 10⁶ cells per each defect); (3) AD-MSCs (1 × 10⁶ cells) no scaffold material, and (4) blank control. The rabbits were then divided into 3 random groups (of 5) and the treatment outcomes were evaluated at 4, 8 and 12 weeks. New bone formation was histologically assessed. Experimental groups were analyzed by CT scan and real-time PCR. Histological analysis of bone defects treated with collagen/PGA alone exhibited significant fibrous connective tissue formation at the 12 weeks of treatments (P ≤ 0.05). There was no significant difference between collagen/PGA alone and collagen/PGA + AD-MSCs groups. The results were confirmed by CT scan data showing healing percentages of 34.20% for the collage/PGA group alone as compared to the control group and no difference with collagen/PGA containing AD-MSCs (1 × 10⁶ cells). RT-PCR analysis also indicated no significant differences between collagen/PGA and collagen/PGA + AD-MSC groups, although both scaffold containing groups significantly express ALP and SIO rather than groups without scaffolds. Although there was no significant difference between the scaffolds containing cells with non-cellular scaffolds, our results indicated that the Collagen/PGA scaffold itself had a significant effect on wound healing as compared to the control group. Therefore, the collagen/PGA scaffold seems to be a promising candidate for research in bone regeneration.

Importance of crosslinking strategies in designing smart biomaterials for bone tissue engineering: A systematic review

Biomaterials are of significant importance in biomedical applications as these biological macromolecules have moderately replaced classical tissue grafting techniques owing to its beneficial properties. Despite of its favourable advantages, poor mechanical and degradative properties of biomaterials are of great concern. To this regard, crosslinkers have emerged as a smart and promising tool to augment the biological functionality of biopolymers. Different crosslinkers have been extensively used in past decades to develop bone substitutes, but the implications of toxic response and adverse reactions are truly precarious after implantation. Traditional crosslinker like glutaraldehyde has been widely used in numerous bio-implants but the potential toxicity is largely being debated with many disproving views. As alternative, green chemicals, enzymatic and non-enzymatic chemicals, bi-functional epoxies, zero-length crosslinkers and physical crosslinkers have been introduced to achieve the desired properties of a bone substitute. In this review, systematic literature search was performed on PubMed database to identify the most commonly used crosslinkers for developing promising bone like materials. The relevant articles were identified, analysed and reviewed in this paper giving due importance to different crosslinking methodologies and comparing their effectiveness and efficacy in regard to material composition, scaffold production, crosslinker dosage, toxicity and immunogenicity. This review summarizes the recent developments in crosslinking mechanism with an emphasis placed on their ability to link proteins through bonding reactions. Finally, this study also covers the convergent and divergent methodologies of crosslinking strategies also giving special importance in retrieving the current limitations and future opportunities of crosslinking modalities in bone tissue engineering.

[Current situation and prospect for orthodontic thermoplastic materials]

Aesthetic and comfortable transparent retainers and clear plastic appliances are becoming increasingly popular, and their components, especially thermoplastic materials, are gradually attracting widespread interest. Orthodontic thermoplastic materials are versatile polymers, and thus their properties, such as force delivery, force relaxation, and aging properties have been comprehensively studied. Meanwhile, blending modification technology has been applied for the acquisition of novel materials with enhanced characteristics. In this paper, we review the types and properties of thermoplastic materials, the development process they undergo, factors that influence their properties, and some development prospects.

Evaluation of Anterior Vertebral Interbody Fusion Using Osteogenic Mesenchymal Stem Cells Transplanted in Collagen Sponge

STUDY DESIGN

The study used a rabbit model to achieve anterior vertebral interbody fusion using osteogenic mesenchymal stem cells (OMSCs) transplanted in collagen sponge.

OBJECTIVE

We investigated the effectiveness of graft material for anterior vertebral interbody fusion using a rabbit model by examining the OMSCs transplanted in collagen sponge.

SUMMARY OF BACKGROUND DATA

Anterior vertebral interbody fusion is commonly performed. Although autogenous bone graft remains the gold-standard fusion material, it requires a separate surgical procedure and is associated with significant short-term and long-term morbidity. Recently, mesenchymal stem cells from bone marrow have been studied in various fields, including posterolateral spinal fusion. Thus, we hypothesized that cultured OMSCs transplanted in porous collagen sponge could be used successfully even in anterior vertebral interbody fusion.

METHODS

Forty mature male White Zealand rabbits (weight, 3.5-4.5 kg) were randomly allocated to receive one of the following graft materials: porous collagen sponge plus cultured OMSCs (group I); porous collagen sponge alone (group II); autogenous bone graft (group III); and nothing (group IV). All animals underwent anterior vertebral interbody fusion at the L4/L5 level. The lumbar spine was harvested en bloc, and the new bone formation and spinal fusion was evaluated using radiographic analysis, microcomputed tomography, manual palpation test, and histologic examination at 8 and 12 weeks after surgery.

RESULTS

New bone formation and bony fusion was evident as early as 8 weeks in groups I and III. And there was no statistically significant difference between 8 and 12 weeks. At both time points, by microcomputed tomography and histologic analysis, new bone formation was observed in both groups I and III, fibrous tissue was observed and there was no new bone in both groups II and IV; by manual palpation test, bony fusion was observed in 40% (4/10) of rabbits in group I, 70% (7/10) of rabbits in group III, and 0% (0/10) of rabbits in both groups II and IV.

CONCLUSIONS

These findings suggest that mesenchymal stem cells that have been cultured with osteogenic differentiation medium and loaded with collagen sponge could induce bone formation and anterior vertebral interbody fusion. And the rabbit model we developed will be useful in evaluating the effects of graft materials for anterior vertebral interbody fusion. Further study is needed to determine the most appropriate carrier for OMSCs and the feasibility in the clinical setting.

Textile Technologies and Tissue Engineering: A Path Toward Organ Weaving

Textile technologies have recently attracted great attention as potential biofabrication tools for engineering tissue constructs. Using current textile technologies, fibrous structures can be designed and engineered to attain the required properties that are demanded by different tissue engineering applications. Several key parameters such as physiochemical characteristics of fibers, microarchitecture, and mechanical properties of the fabrics play important roles in the effective use of textile technologies in tissue engineering. This review summarizes the current advances in the manufacturing of biofunctional fibers. Different textile methods such as knitting, weaving, and braiding are discussed and their current applications in tissue engineering are highlighted.

Optimization of sterilization methods for electrospun poly(ε-caprolactone) to enhance pre-osteoblast cell behaviors for guided bone regeneration

The aim of this study was to determine the optimal sterilization procedure for biodegradable polyester-based guided bone regeneration membranes. The effects of sterilization using low-temperature hydrogen peroxide gas plasma, 75% ethanol (EtOH; two soaking times), and ultraviolet radiation on the structure and biological properties of electrospun poly(ε-caprolactone) membranes were investigated. The results demonstrated that all were effective sterilization methods. The membranes were then assessed for surface structure, wettability, and in vitro cellular responses including osteogenic differentiation by seeding with pre-osteoblasts (MC3T3-E1 cells). The cells grew well on all the sterilized membranes. The low-temperature hydrogen peroxide gas plasma–sterilized membranes, which exhibited significantly improved hydrophilicity ( p < 0.05), were better for cell osteogenic differentiation compared to the membranes sterilized by other methods. In addition, the cell behavior on the membranes sterilized by EtOH was superior to those sterilized by ultraviolet radiation. Finally, EtOH soaking time appeared to influence cell behavior. The results suggested that low-temperature hydrogen peroxide gas plasma treatment is the most promising method to sterilize electrospun poly(ε-caprolactone) membranes for guided bone regeneration.

Mesenchymal stem cell expression of SDF-1β synergizes with BMP-2 to augment cell-mediated healing of critical-sized mouse calvarial defects

Bone has the potential for spontaneous healing. This process, however, often fails in patients with comorbidities. Tissue engineering combining functional cells, biomaterials and osteoinductive cues may provide alternative treatment strategies. We have recently demonstrated that stromal cell-derived factor-1β (SDF-1β) works in concert with bone morphogenetic protein-2 (BMP-2) to potentiate osteogenic differentiation of bone marrow-derived mesenchymal stem/stromal cells (BMSCs). Here, we test the hypothesis that SDF-1β overexpressed in Tet-Off-SDF-1β BMSCs, delivered on acellular dermal matrix (ADM), synergistically augments BMP-2-induced healing of critical-sized mouse calvarial defects. BMSC therapies alone showed limited bone healing, which was increased with co-delivery of BMP-2. This was further enhanced in Tet-Off-SDF-1β BMSCs + BMP-2. Only limited BMSC retention on ADM constructs was observed after 4 weeks in vivo, which was increased with BMP-2 co-delivery. In vitro cell proliferation studies showed that supplementing BMP-2 to Tet-Off BMSCs significantly increased the cell number during the first 24 h. Consequently, the increased cell numbers decreased the detectable BMP-2 levels in the medium, but increased cell-associated BMP-2. The data suggest that SDF-1β provides synergistic effects supporting BMP-2-induced, BMSC-mediated bone formation and appears suitable for optimization of bone augmentation in combination therapy protocols. Copyright © 2015 John Wiley & Sons, Ltd.

Different Methylation Patterns of RUNX2, OSX, DLX5 and BSP in Osteoblastic Differentiation of Mesenchymal Stem Cells

Objective

Runt-related transcription factor 2 (RUNX2) and osterix (OSX) as two specific osteoblast transcription factors and distal-less homeobox 5 (DLX5) as a non-specific one are of paramount importance in regulating osteoblast related genes including osteocalcin, bone sialoprotein (BSP), osteopontin and collagen type Iα1. The present study sets out to investigate whether epigenetic regulation of these genes is important in osteoblastic differentiation of mesenchymal stem cells (MSCs).

Materials and Methods

In this experimental study, MSCs were differentiated to osteoblasts under the influence of the osteogenic differentiation medium. DNA and RNA were extracted at days 0, 7, 14 and 21 from MSCs differentiating to osteoblasts. Promoter regions of RUNX2, OSX, DLX5 and BSP were analyzed by methylation-specific PCR (MSP). Gene expression was analyzed during osteoblastic differentiation by quantitative real-time polymerase chain reaction (PCR).

Results

MSP analysis revealed that promoter methylation status did not change in RUNX2, DLX5 and BSP during MSC osteoblastic differentiation. In contrast, OSX promoter showed a dynamic change in methylation pattern. Moreover, RUNX2, OSX, DLX5 and BSP promoter regions showed three different methylation patterns during MSC differentiation. Gene expression analyses confirmed these results.

Conclusion

The results show that in differentiation of MSCs to osteoblasts, epigenetic regulation of OSX may play a leading role.

Regenerative medicine and nasal surgery

Nasal surgery is a constellation of operations that are intended to restore form and function to the nose. The amount of augmentation required for a given case is a delicate interplay between patient aesthetic desires and corrective measures taken for optimal nasal airflow. Traditional surgical techniques make use of autologous donor tissue or implanted alloplastic materials to restore nasal deficits. Limited availability of donor tissue and associated harvest site morbidity have pushed surgeons and researchers to investigate methods to bioengineer nasal tissues. For this article, we conducted a review of the literature on regenerative medicine as it pertains to nasal surgery. PubMed was searched for articles dating from January 1, 1994, through August 1, 2014. Journal articles with a focus on regenerative medicine and nasal tissue engineering are included in this review. Our search found that the greatest advancements have been in the fields of mucosal and cartilage regeneration, with a growing body of literature to attest to its promise. With recent advances in bioscaffold fabrication, bioengineered cartilage quality, and mucosal regeneration, the transition from comparative animal models to more expansive human studies is imminent. Each of these advancements has exciting implications for treating patients with increased efficacy, safety, and satisfaction.

Effect of graphitic layers encapsulating single-crystal apatite nanowire on the osteogenesis of human mesenchymal stem cells

An ideally designed scaffold for tissue engineering must be able to provide an environment that recapitulates the physiological conditions to control stem cell function. Here, we compared vertically aligned single-crystal apatite nanowires sheathed in graphitic layers (SANGs) with single-crystal apatite nanowires (SANs), which had the same geometric properties as--but differing nanotopographic surface chemistry than--SANGs, in order to evaluate the effect of the graphitic layer on the behavior of human mesenchymal stem cells (hMSCs). The difference in nanotopographic surface chemistry did not affect hMSC adhesion, growth, or morphology. However, hMSCs were more effectively differentiated into bone cells on SANGs through interaction with graphitic layers, which later degraded and thereby allowed the cells to continue differentiation on the bare apatite nanowires. Thus, SANGs provide an excellent microenvironment for the osteogenic differentiation of hMCS.

Development of 3D in vitro technology for medical applications

In the past few years, biomaterials technologies together with significant efforts on developing biology have revolutionized the process of engineered materials. Three dimensional (3D) in vitro technology aims to develop set of tools that are simple, inexpensive, portable and robust that could be commercialized and used in various fields of biomedical sciences such as drug discovery, diagnostic tools, and therapeutic approaches in regenerative medicine. The proliferation of cells in the 3D scaffold needs an oxygen and nutrition supply. 3D scaffold materials should provide such an environment for cells living in close proximity. 3D scaffolds that are able to regenerate or restore tissue and/or organs have begun to revolutionize medicine and biomedical science. Scaffolds have been used to support and promote the regeneration of tissues. Different processing techniques have been developed to design and fabricate three dimensional scaffolds for tissue engineering implants. Throughout the chapters we discuss in this review, we inform the reader about the potential applications of different 3D in vitro systems that can be applied for fabricating a wider range of novel biomaterials for use in tissue engineering.

Controlled surface morphology and hydrophilicity of polycaprolactone toward selective differentiation of mesenchymal stem cells to neural like cells

Differentiation of mesenchymal stem cells (MSCs) into neuron cells has great potential in therapy of damaged nerve tissue. It has been shown that three-dimensional biomaterials have great ability to up regulate the expression of neuronal proteins. In this study, O2 plasma technology was used to enhance hydrophilicity of poly (ε-caprolactone) (PCL) toward selective differentiation of MSCs into neural cells. Random and aligned PCL nanofibers scaffolds were fabricated by electrospinning method and their physicochemical and mechanical properties were carried out by scanning electron microscope (SEM), contact angle, and tensile measurements. Contact angle studies of PCL and plasma treated PCL (p-PCL) nanofibers revealed significant change on the surface properties PCL nanofibers from the view point of hydrophilicity. Physiochemical studies revealed that p-PCL nanofibers were extremely hydrophilic compared with untreated PCL nanofibers which were highly hydrophobic and nonabsorbent to water. Differentiation of MSCs were carried out by inducing growth factors including basic fibroblast growth factor, nerve growth factor, and brain derived growth factor, NT3, 3-isobutyl-1-methylxanthine (IBMX) in Dulbecco's modified Eagle's medium/F12 media. Differentiated MSCs on nanofibrous scaffold were examined by immunofluorescence assay and was found to express the neuronal proteins; β-tubulin III and Map2, on day 15 after cell culture. The real-time polymerase chain reaction (RT-PCR) analysis showed that p-PCL nanofibrous scaffold could upregulate expression of Map-2 and downregulate expression of Nestin genes in nerve cells differentiated from MSCs. This study indicates that mesenchymal stem cell cultured on nanofibrous scaffold have potential differentiation to neuronal cells on and could apply in nerve tissue repair.

Stem cell and tissue engineering research in the Islamic republic of Iran

During the last few years, the Islamic republic of Iran has consistently grown in nearly all scientific fields and achieved considerable success in producing science and developing technology. The Iranian government and scientific community have jointly started programs to support the creation of new scientific opportunities and technology platforms for research in the domain of stem cell and tissue engineering. In addition, clinical translation of basic researches in the fields of stem cell and regenerative medicine has been amongst the top priorities. Interestingly, the public sector, media, and authorities are also actively monitoring these attainments. In spite of this nationwide interest, however, there is currently a dearth of analytical information on these accomplishments. To address this issue, here we introduce the key decisions made by the country's policy makers and also review some of the Iranian researchers' publications in this field.

Osteogenic differentiation of human dental pulp stem cells on β-tricalcium phosphate/poly (l-lactic acid/caprolactone) three-dimensional scaffolds

Functional tissue engineering for bone augmentation requires the appropriate combination of biomaterials, mesenchymal stem cells, and specific differentiation factors. Therefore, we investigated the morphology, attachment, viability, and proliferation of human dental pulp stem cells cultured in xeno-free conditions in human serum medium seeded on β-tricalcium phosphate/poly(l-lactic acid/caprolactone) three-dimensional biomaterial scaffold. Additionally, osteogenic inducers dexamethasone and vitamin D₃ were compared to achieve osteogenic differentiation. Dental pulp stem cells cultured in human serum medium maintained their morphology; furthermore, cells attached, remained viable, and increased in cell number within the scaffold. Alkaline phosphatase staining showed the osteogenic potential of dental pulp stem cells under the influence of osteogenic medium containing vitamin D₃ or dexamethasone within the scaffolds. Maintenance of dental pulp stem cells for 14 days in osteogenic medium containing vitamin D₃ resulted in significant increase in osteogenic markers as shown at mRNA level in comparison to osteogenic medium containing dexamethasone. The results of this study show that osteogenic medium containing vitamin D₃ osteo-induced dental pulp stem cells cultured in human serum medium within β-tricalcium phosphate/poly(l-lactic acid/caprolactone) three-dimensional biomaterial, which could be directly translated clinically.

Stiffening of human mesenchymal stem cell spheroid microenvironments induced by incorporation of gelatin microparticles

Culturing multipotent adult mesenchymal stem cells as 3D aggregates augments their differentiation potential and paracrine activity. One caveat of stem cell spheroids, though, can be the limited diffusional transport barriers posed by the inherent 3D structure of the multicellular aggregates. In order to circumvent such limitations, polymeric microparticles have been incorporated into stem cell aggregates as a means to locally control the biochemical and physical properties of the 3D microenvironment. However, the introduction of biomaterials to the 3D stem cell microenvironment could alter the mechanical forces sensed by cells within aggregates, which in turn could impact various cell behaviors and overall spheroid mechanics. Therefore, the objective of this study was to determine the acute effects of biomaterial incorporation within mesenchymal stem cell spheroids on aggregate structure and mechanical properties. The results of this study demonstrate that although gelatin microparticle incorporation results in similar multi-cellular organization within human mesenchymal stem cell spheroids, the introduction of gelatin materials significantly impacts spheroid mechanical properties. The marked differences in spheroid mechanics induced by microparticle incorporation may hold major implications for in vitro directed differentiation strategies and offer a novel route to engineer the mechanical properties of tissue constructs ex vivo.

Development of 3D in vitro platform technology to engineer mesenchymal stem cells

This study aims to develop a three-dimensional in vitro culture system to genetically engineer mesenchymal stem cells (MSC) to express bone morphogenic protein-2. We employed nanofabrication technologies borrowed from the spinning industry, such as electrospinning, to mass-produce identical building blocks in a variety of shapes and sizes to fabricate electrospun nanofiber sheets comprised of composites of poly (glycolic acid) and collagen. Homogenous nanoparticles of cationic biodegradable natural polymer were formed by simple mixing of an aqueous solution of plasmid DNA encoded bone morphogenic protein-2 with the same volume of cationic polysaccharide, dextran-spermine. Rat bone marrow MSC were cultured on electrospun nanofiber sheets comprised of composites of poly (glycolic acid) and collagen prior to the incorporation of the nanoparticles into the nanofiber sheets. Bone morphogenic protein-2 was significantly detected in MSC cultured on nanofiber sheets incorporated with nanoparticles after 2 days compared with MSC cultured on nanofiber sheets incorporated with naked plasmid DNA. We conclude that the incorporation of nanoparticles into nanofiber sheets is a very promising strategy to genetically engineer MSC and can be used for further applications in regenerative medicine therapy.

Advanced cell therapies with and without scaffolds

Tissue engineering and regenerative medicine aim to produce tissue substitutes to restore lost functions of tissues and organs. This includes cell therapies, induction of tissue/organ regeneration by biologically active molecules, or transplantation of in vitro grown tissues. This review article discusses advanced cell therapies that make use of scaffolds and scaffold-free approaches. The first part of this article covers the basic characteristics of scaffolds, including characteristics of scaffold material, fabrication and surface functionalization, and their applications in the construction of hard (bone and cartilage) and soft (nerve, skin, blood vessel, heart muscle) tissue substitutes. In addition, cell sources as well as bioreactive agents, such as growth factors, that guide cell functions are presented. The second part in turn, examines scaffold-free applications, with a focus on the recently discovered cell sheet engineering. This article serves as a good reference for all applications of advanced cell therapies and as well as advantages and limitations of scaffold-based and scaffold-free strategies.

Construction of artificial laminae of the vertebral arch using bone marrow mesenchymal stem cells transplanted in collagen sponge

STUDY DESIGN

A rabbit laminectomy model was used to evaluate the efficacy of artificial laminae of vertebral arch using bone marrow-derived osteoblasts transplanted in a collagen sponge.

OBJECTIVE

The objective of this study is to reconstruct the artificial laminae of vertebral arch using bone marrow-derived osteoblasts transplanted in a collagen sponge on a rabbit model.

SUMMARY OF BACKGROUND DATA

Because the laminectomy and semilaminectomy can effectively decompress the spinal cord and expand the vertebral canal, they have been performed as routine surgical procedures. However, long-term follow-up results show that these procedures can lead to many serious complications. A variety of strategies have been used to solve these complications, but there are few experiments to determine the efficacy of reconstructing the laminae of vertebral arch using bone marrow-derived osteoblasts and the collagen sponge.

METHODS

The bone marrow mesenchymal stem cells (BMSCs) from the bone marrow in the femur of 2-week-old rabbits were obtained by centrifugation and adhesion. The BMSCs were induced to differentiate into osteoblasts, which were transplanted into collagen sponge to construct the tissue-engineering bone. A total of 48 rabbits were randomly divided into three groups. Lumbar laminectomies were performed on all of the rabbits. Group A was the control. Groups B and C were implanted with collagen sponge and tissue-engineering bone, respectively. The artificial laminae of the vertebral arch were examined qualitatively by imageology and histomorphometry.

RESULTS

The artificial laminae of the vertebral arch successfully formed 4 weeks after the operation in group C; computed tomography examination at 4 weeks showed that the new laminae of vertebral arch were formed, and that the vertebral canal was intact.

CONCLUSION

The artificial laminae of the vertebral arch can be successfully constructed using tissue engineering of transplanted BMSCs.

Enhanced cellular responses of human bone marrow stromal cells cultured on pretreated surface with allogenic platelet-rich plasma

The principal objective of this study was to evaluate the effects of surface pretreatment with platelet-rich plasma (PRP) on the cellular functions of human bone marrow stromal cells (hBMSCs). The surfaces of tissue culture plates (TCPs) were pretreated by adding PRP followed by centrifugation to bring platelets closer to the surface, followed by incubation for 60 min at 37°C. Then, hBMSCs were seeded onto TCP and TCP pretreated with PRP (TCP-PRP), followed by culture in osteogenic medium. Cell attachment, proliferation, and osteogenic differentiation were evaluated. Field emission scanning electron microscope (FE-SEM; JSM-7401F, JEOL Ltd., Japan) observations were conducted. The attachment of hBMSCs was significantly lower on TCP-PRP than on TCP. However, when the cell numbers were normalized with those observed on day 1 of culture, cellular proliferation on 5 days was significantly higher on TCP-PRP. Alkaline phosphatase activity, an index of early phase of osteoblastic differentiation, was significantly higher on TCP-PRP on day 14. Calcium deposition amount, an index of terminal osteoblastic differentiation, was also significantly higher on TCP-PRP on days 14 and 21. The results of von Kossa staining confirmed that, on day 21, the area of mineralized nodules was significantly larger on TCP-PRP. FE-SEM observation demonstrated that activated platelets and fibrin network covered the surface after PRP treatment. An increase in the number of hBMSCs and their cellular products was evident on the FE-SEM observation, and the fibrin network remained on day 21. Our results demonstrate that a PRP-treated surface enhanced early proliferation and late osteogenic differentiation of hBMSCs.