Short-Term Cultivation of In Situ Prevascularized Tissue Constructs Accelerates Inosculation of Their Preformed Microvascular Networks After Implantation into the Host Tissue

Exploring Preclinical Experiments with Different Fat Types for Autologous Fat Grafting

BACKGROUND

Autologous fat transplantation has been a cornerstone of tissue regeneration for decades. However, there is no standardized selection system or criteria for fat graft selection, often relying heavily on the surgeon's experience.

OBJECTIVES

This study aimed to investigate various types of fat derivatives, both in vitro and in vivo at the same condition.

METHODS

We collected traditional fat granules of different sizes and SVF-gel, evaluating the viability of ADSCs isolated from them and their performance after grafting into mice.

RESULTS

Large fat granules exhibited more complete adipocyte structures, and the isolated ADSCs demonstrated superior differentiation, proliferation, and secretion capacities. They also showed excellent volume retention after 12 weeks. In contrast, ADSCs isolated from SVF-gel displayed lower vitality. However, grafts from SVF-gel exhibited the highest volume maintenance rate among the four groups after 12 weeks, closely resembling normal adipose tissue and displaying significant vascularization. Compared to large fat granule and SVF-gel group, medium and small fat granule grafts exhibited lower volume retention and less angiogenesis.

CONCLUSIONS

Through preclinical studies, the flexible clinical use of different fat grafts can be tailored to their unique characteristics.

LEVEL OF EVIDENCE I

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Ultrasound standing wave spatial patterning of human umbilical vein endothelial cells for 3D micro-vascular networks formation

Generating functional and perfusable micro-vascular networks is an important goal for the fabrication of large and three-dimensional tissues. Up to now, the fabrication of micro-vascular networks is a complicated multitask involving several different factors such as time consuming, cells survival, micro-diameter vasculature and strict alignment. Here, we propose a technique combining multi-material extrusion and ultrasound standing wave forces to create a network structure of human umbilical vein endothelial cells within a mixture of calcium alginate and decellularized extracellular matrix. The functionality of the matured microvasculature networks was demonstrated through the enhancement of cell-cell adhesion, angiogenesis process, and perfusion tests with microparticles, FITC-dextran, and whole mouse blood. Moreover, animal experiments exhibited the implantability including that the pre-existing blood vessels of the host sprout towards the preformed vessels of the scaffold over time and the microvessels inside the implanted scaffold matured from empty tubular structures to functional blood-carrying microvessels in two weeks.

Perfusable cell-laden matrices to guide patterning of vascularization in vivo

The survival and function of transplanted tissue engineered constructs and organs require a functional vascular network. In the body, blood vessels are organized into distinct patterns that enable optimal nutrient delivery and oxygen exchange. Mimicking these same patterns in engineered tissue matrices is a critical challenge for cell and tissue transplantation. Here, we leverage bioprinting to assemble endothelial cells in to organized networks of large (>100 μm) diameter blood vessel grafts to enable spatial control of vessel formation in vivo. Acellular PEG/GelMA matrices with perfusable channels were bioprinted and laminar flow was confirmed within patterned channels, beneficial for channel endothelialization and consistent wall shear stress for endothelial maturation. Next, human umbilical vein endothelial cells (HUVECs) were seeded within the patterned channel and maintained under perfusion culture for multiple days, leading to cell-cell coordination within the construct in vitro. HUVEC and human mesenchymal stromal cells (hMSCs) were additionally added to bulk matrix to further stimulate anastomosis of our bioprinted vascular grafts in vivo. Among multiple candidate matrix designs, the greatest degree of biomaterial vascularization in vivo was seen within matrices fabricated with HUVECs and hMSCs encapsulated within the bulk matrix and HUVECs lining the walls of the patterned channels, dubbed design M-C_E. For this lead design, vasculature was detected within the endothelialized, perfusable matrix channels as early as two weeks and αSMA+ CD31+ vessels greater than 100 μm in diameter had formed by eight weeks, resulting in durable and mature vasculature. Notably, vascularization occurred within the endothelialized, bioprinted channels of the matrix, demonstrating the ability of bioprinted perfusable structures to guide vascularization patterns in vivo. The ability to influence vascular patterning in vivo can contribute to the future development of vascularized tissues and organs.

The fates of different types of adipose tissue after transplantation in mice

Fat grafting is one of the most commonly applied procedure for soft-tissue repair. However, it remains unclear whether the type of adipose tissue would have any effects on fat graft survival. The present study aimed to determine fates of fat grafting of three different types of fat tissue. In this study, mice were randomly divided into three groups, white adipose tissue (WAT) group, beige adipose tissue (beige AT) group and brown adipose tissue (BAT) group. Before transplantation, donor mice were injected with rosiglitazone or phosphate-buffered saline (PBS). The WAT and BAT were obtained from PBS-treated mice while beige AT was obtained from the rosiglitazone-treated mice. Three types of fat tissue (150 mg each) were transplanted in three groups, respectively, and harvested at 2, 4 or 12 weeks. The BAT and beige AT contained smaller adipocytes and expressed higher level of uncoupling protein-1 gene. The retention rate of the transplanted fat was significantly higher for beige than for white fat, but was significantly lower for brown than for white fat. Transplanted brown fat was characterized by upregulated inflammation and high endoplasmic reticulum stress. By contrast, fat grafts in beige AT group showed the best adipogenic capacity, moderate inflammation level and superior angiongenesis. In vitro, under hypoxic condition, fewer apoptotic cells were found in beige adipocyte group than that in brown and white adipocyte group. Conditioned medium from brown adipocytes induced M1 polarization of RAW 264.7 macrophages while that from beige adipocytes effectively promoted M2 polarization. Therefore, we suggest that beige AT provides a new potential choice for fat grafting because of low inflammation and superior survival but BAT might not be ideal for fat grafting due to its poor survival.

Biomimetic Surface Topography from the Rubus fruticosus Leaf as a Guidance of Angiogenesis in Tissue Engineering Applications

The promotion of angiogenesis is a fundamental step for efficient organ/tissue reconstitution and replacement. Thus, several strategies to promote vascularization of scaffolds were studied to satisfy this unsolved clinical need. The interface between cells and substrates is a determinant for the success of tissue engineering (TE) strategies. Substrate's topography is reported to play a key role in influencing endothelial cell behavior, namely, on its proliferation, metabolic activity, morphology, migration, and secretion of cytokines and chemokines. Therefore, surface topography of the biomaterial-based grafts is a crucial property that is considered in the development of a new TE approach. Herein, we hypothesize that the surface of Rubus fruticosus leaf plays a crucial role in driving angiogenesis since its architecture resembles the vascular structures at a biologically relevant size scale. For this, we produced biomimetic polycaprolactone (PCL) membranes (BpMs) replicating the surface topography of a R. fruticosus leaf by replica molding and nanoimprint lithography. Our results showed an enhanced performance in terms of proliferation of the human endothelial cell line on top of the BpM. Moreover, an asymmetric cellular spatial distribution among the surface of the BpM was observed. These cells seem to have higher density for longer time periods in the region that replicates the leaf veins. Finally, we assess the angiogenic capacity through a chick chorioallantoic membrane assay, revealing that BpMs are more prone to support angiogenesis than flat PCL membranes. We strongly believe that this strategy can bring new insights into developing TE strategies with an enhanced performance in terms of the vascular integration between the host and the scaffolds implanted.

In vitro dynamic perfusion of prevascularized OECs-DBMs (outgrowth endothelial progenitor cell - demineralized bone matrix) complex fused to recipient vessels in an internal inosculation manner

The current research on seed cells and scaffold materials of bone tissue engineering has achieved milestones. Nevertheless, necrosis of seed cells in center of bone scaffold is a bottleneck in tissue engineering. Therefore, this study aimed to investigate the in vivo inosculation mechanism of recipient microvasculature and prevascularized outgrowth endothelial progenitor cells (OECs)-demineralized bone matrix (DBM) complex. A dorsal skinfold window-chamber model with tail vein injection of Texas red-dextran was established to confirm the optimal observation time of microvessels. OECs-DBM complex under static and dynamic perfusion culture was implanted into the model to analyze vascularization. OECs-DBM complex was harvested on 12th day for HE staining and fluorescent imaging. The model was successfully constructed, and the most appropriate time to observe microvessels was 15 min after injection. The ingrowth of recipient microvessels arcoss the border of OECs-DBM complex increased with time in both groups, and more microvessels across the border were observed in dynamic perfusion group on 3rd, 5th, 7th day. Fluorescent integrated density of border in dynamic perfusion group was higher at all-time points, and the difference was more significant in central area. Fluorescent imaging of OECs-DBM complex exhibited that no enhanced green fluorescent protein-positive cells were found beyond the verge of DBM scaffold in both groups. In vitro prevascularization by dynamic perfusion culture can increase and accelerate the blood perfusion of OECs-DBM complex obtained from recipient microvasculature by internal inosculation. Accordingly, this approach may markedly contribute to the future success of tissue engineering applications in clinical practice.

Chemically induced hypoxia by dimethyloxalylglycine (DMOG)-loaded nanoporous silica nanoparticles supports endothelial tube formation by sustained VEGF release from adipose tissue-derived stem cells

Inadequate vascularization leading to insufficient oxygen and nutrient supply in deeper layers of bioartificial tissues remains a limitation in current tissue engineering approaches to which pre-vascularization offers a promising solution. Hypoxia triggering pre-vascularization by enhanced vascular endothelial growth factor (VEGF) expression can be induced chemically by dimethyloxalylglycine (DMOG). Nanoporous silica nanoparticles (NPSNPs, or mesoporous silica nanoparticles, MSNs) enable sustained delivery of molecules and potentially release DMOG allowing a durable capillarization of a construct. Here we evaluated the effects of soluble DMOG and DMOG-loaded NPSNPs on VEGF secretion of adipose tissue-derived stem cells (ASC) and on tube formation by human umbilical vein endothelial cells (HUVEC)-ASC co-cultures. Repeated doses of 100 µM and 500 µM soluble DMOG on ASC resulted in 3- to 7-fold increased VEGF levels on day 9 (P < 0.0001). Same doses of DMOG-NPSNPs enhanced VEGF secretion 7.7-fold (P < 0.0001) which could be maintained until day 12 with 500 µM DMOG-NPSNPs. In fibrin-based tube formation assays, 100 µM DMOG-NPSNPs had inhibitory effects whereas 50 µM significantly increased tube length, area and number of junctions transiently for 4 days. Thus, DMOG-NPSNPs supported endothelial tube formation by upregulated VEGF secretion from ASC and thus display a promising tool for pre-vascularization of tissue-engineered constructs. Further studies will evaluate their effect in hydrogels under perfusion.

Tissue engineering and 3D printing of bioartificial pancreas for regenerative medicine in diabetes

Diabetes is a severe chronic disease worldwide. In various types of diabetes, the pancreatic beta cells fail to secrete sufficient insulin, at some point, to regulate blood glucose levels. Therefore, the replacement of dysfunctional pancreas, islets of Langerhans, or even the insulin-secreting beta cells facilitates physiological regulation of blood glucose levels. However, the current lack of sufficient donor human islets for cell replacement therapy precludes a routine and absolute cure for most of the existing diabetes cases globally. It is envisioned that tissue engineering of a bioartificial pancreas will revolutionize regenerative medicine and the treatment of diabetes. In this review, we discuss the anatomy and physiology of the pancreas, and identify the clinical considerations for engineering a bioartificial pancreas. Subsequently, we dissect the bioengineering problem based on the design of the device, the biomaterial used, and the cells involved. Last but not least, we highlight current tissue engineering challenges and explore potential directions for future work.

Biofabrication of Prevascularised Hypertrophic Cartilage Microtissues for Bone Tissue Engineering

Bone tissue engineering (TE) has the potential to transform the treatment of challenging musculoskeletal pathologies. To date, clinical translation of many traditional TE strategies has been impaired by poor vascularisation of the implant. Addressing such challenges has motivated research into developmentally inspired TE strategies, whereby implants mimicking earlier stages of a tissue's development are engineered in vitro and then implanted in vivo to fully mature into the adult tissue. The goal of this study was to engineer in vitro tissues mimicking the immediate developmental precursor to long bones, specifically a vascularised hypertrophic cartilage template, and to then assess the capacity of such a construct to support endochondral bone formation in vivo. To this end, we first developed a method for the generation of large numbers of hypertrophic cartilage microtissues using a microwell system, and encapsulated these microtissues into a fibrin-based hydrogel capable of supporting vasculogenesis by human umbilical vein endothelial cells (HUVECs). The microwells supported the formation of bone marrow derived stem/stromal cell (BMSC) aggregates and their differentiation toward a hypertrophic cartilage phenotype over 5 weeks of cultivation, as evident by the development of a matrix rich in sulphated glycosaminoglycan (sGAG), collagen types I, II, and X, and calcium. Prevascularisation of these microtissues, undertaken in vitro 1 week prior to implantation, enhanced their capacity to mineralise, with significantly higher levels of mineralised tissue observed within such implants after 4 weeks in vivo within an ectopic murine model for bone formation. It is also possible to integrate such microtissues into 3D bioprinting systems, thereby enabling the bioprinting of scaled-up, patient-specific prevascularised implants. Taken together, these results demonstrate the development of an effective strategy for prevascularising a tissue engineered construct comprised of multiple individual microtissue "building blocks," which could potentially be used in the treatment of challenging bone defects.

3D bioprinting of prevascularised implants for the repair of critically-sized bone defects

For 3D bioprinted tissues to be scaled-up to clinically relevant sizes, effective prevascularisation strategies are required to provide the necessary nutrients for normal metabolism and to remove associated waste by-products. The aim of this study was to develop a bioprinting strategy to engineer prevascularised tissues in vitro and to investigate the capacity of such constructs to enhance the vascularisation and regeneration of large bone defects in vivo. From a screen of different bioinks, a fibrin-based hydrogel was found to best support human umbilical vein endothelial cell (HUVEC) sprouting and the establishment of a microvessel network. When this bioink was combined with HUVECs and supporting human bone marrow stem/stromal cells (hBMSCs), these microvessel networks persisted in vitro. Furthermore, only bioprinted tissues containing both HUVECs and hBMSCs, that were first allowed to mature in vitro, supported robust blood vessel development in vivo. To assess the therapeutic utility of this bioprinting strategy, these bioinks were used to prevascularise 3D printed polycaprolactone (PCL) scaffolds, which were subsequently implanted into critically-sized femoral bone defects in rats. Micro-computed tomography (µCT) angiography revealed increased levels of vascularisation in vivo, which correlated with higher levels of new bone formation. Such prevascularised constructs could be used to enhance the vascularisation of a range of large tissue defects, forming the basis of multiple new bioprinted therapeutics. STATEMENT OF SIGNIFICANCE: This paper demonstrates a versatile 3D bioprinting technique to improve the vascularisation of tissue engineered constructs and further demonstrates how this method can be incorporated into a bone tissue engineering strategy to improve vascularisation in a rat femoral defect model.

In Vitro and in Vivo Analysis of Adhesive, Anti-Inflammatory, and Proangiogenic Properties of Novel 3D Printed Hyaluronic Acid Glycidyl Methacrylate Hydrogel Scaffolds for Tissue Engineering

In this study, we prepared hydrogel scaffolds for tissue engineering by computer-assisted extrusion three-dimensional (3D) printing with photocured (λ = 445 nm) hyaluronic acid glycidyl methacrylate (HAGM). The developed product was compared with the polylactic-co-glycolic acid (PLGA) scaffolds generated by means of the original antisolvent 3D printing methodology. The cytotoxicity and cytocompatibility of the scaffolds were analyzed in vitro by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide tests, flow cytometry, and scanning electron microscopy. Anti-inflammatory and proangiogenic properties of the scaffolds were evaluated in the dorsal skinfold chamber mouse model by means of intravital fluorescence microscopy, histology, and immunohistochemistry throughout an observation period of 14 days. In vitro, none of the scaffolds revealed cytotoxicity on days 1, 2, and 5 after seeding with umbilical cord-derived multipotent stromal cells, and the primary cell adhesion to the surface of HAGM scaffolds was low. In vivo, implanted HAGM scaffolds showed enhanced vascularization and host tissue ingrowth, and the inflammatory response to them was less pronounced compared with PLGA scaffolds. The results indicate excellent biocompatibility and vascularization capacity of the developed 3D printed HAGM scaffolds and position them as strong candidates for advanced tissue engineering applications.

Biological coating with platelet-rich plasma and adipose tissue-derived microvascular fragments improves the vascularization, biocompatibility and tissue incorporation of porous polyethylene

Porous polyethylene (pPE) is a commonly used biomaterial in craniofacial reconstructive surgery. However, implant failure due to insufficient vascularization represents a major issue. To overcome this problem, we herein introduce an effective strategy to improve the vascularization and incorporation of pPE. Adipose tissue-derived microvascular fragments (MVF) from transgenic green fluorescent protein (GFP)⁺ mice were suspended in platelet-rich plasma (PRP) for the coating of pPE. PRP/MVF-coated pPE as well as PRP-coated and uncoated controls were subsequently implanted into the dorsal skinfold chamber and the flanks of GFP^- wild-type mice to analyze their in vivo performance throughout 2, 4 and 8 weeks by means of intravital fluorescence microscopy, histology and immunohistochemistry. The GFP⁺/GFP^- cross-over design allowed the identification of GFP⁺ MVF within the implants. Shortly after implantation, they rapidly reassembled into new blood-perfused microvascular networks, resulting in a significantly accelerated vascularization of PRP/MVF-coated pPE when compared to both controls. The overall numbers of rolling and adherent leukocytes within the microcirculation as well as macrophages, multi-nucleated giant cells and mast cells around the implants did not differ between the three groups. However, in contrast to uncoated controls, PRP/MVF-coated and PRP-coated pPE promoted pro-angiogenic M2 macrophage polarization at the implantation site. These findings demonstrate that PRP/MVF-coating represents a highly effective strategy to enhance the vascularization, biocompatibility and tissue incorporation of pPE. STATEMENT OF SIGNIFICANCE: The clinical in vivo performance of implanted biomaterials is crucially dependent on their adequate incorporation into the body. To achieve this, we herein introduce an effective biological coating strategy. Our results demonstrate that coating with PRP and MVF accelerates and enhances the vascularization, biocompatibility and tissue incorporation of porous polyethylene. Because this type of biological coating is easily applicable on any type of biomaterial, our approach may rapidly be translated into clinical practice to improve the outcome of various regenerative approaches.

Fabrication Techniques for Vascular and Vascularized Tissue Engineering

Impaired or damaged blood vessels can occur at all levels in the hierarchy of vascular systems from large vasculatures such as arteries and veins to meso- and microvasculatures such as arterioles, venules, and capillary networks. Vascular tissue engineering has become a promising approach for fabricating small-diameter vascular grafts for occlusive arteries. Vascularized tissue engineering aims to fabricate meso- and microvasculatures for the prevascularization of engineered tissues and organs. The ideal small-diameter vascular graft is biocompatible, bridgeable, and mechanically robust to maintain patency while promoting tissue remodeling. The desirable fabricated meso- and microvasculatures should rapidly integrate with the host blood vessels and allow nutrient and waste exchange throughout the construct after implantation. A number of techniques used, including engineering-based and cell-based approaches, to fabricate these synthetic vasculatures are herein explored, as well as the techniques developed to fabricate hierarchical structures that comprise multiple levels of vasculature.

Decorin-supplemented collagen hydrogels for the co-delivery of bone morphogenetic protein-2 and microvascular fragments to a composite bone-muscle injury model with impaired vascularization

Traumatic musculoskeletal injuries that result in bone defects or fractures often affect both bone and the surrounding soft tissue. Clinically, these types of multi-tissue injuries have increased rates of complications and long-term disability. Vascular integrity is a key clinical indicator of injury severity, and revascularization of the injury site is a critical early step of the bone healing process. Our lab has previously established a pre-clinical model of composite bone-muscle injury that exhibits impaired bone healing; however, the vascularization response in this model had not yet been investigated. Here, the early revascularization of a bone defect following composite injury is shown to be impaired, and subsequently the therapeutic potential of combined vascularization and osteoinduction was investigated to overcome the impaired regeneration in composite injuries. A decorin (DCN)-supplemented collagen hydrogel was developed as a biomaterial delivery vehicle for the co-delivery microvascular fragments (MVF), which are multicellular segments of mature vasculature, and bone morphogenetic protein-2 (BMP-2), a potent osteoinductive growth factor. We hypothesized that collagen + DCN would increase BMP-2 retention over collagen alone due to DCN's ability to sequester TGF-ß growth factors. We further hypothesized that MVF would increase both early vascularization and subsequent BMP-2-mediated bone regeneration. Contrary to our hypothesis, BMP + MVF decreased the number of blood vessels relative to BMP alone and had no effect on bone healing. However, collagen + DCN was demonstrated to be a BMP-2 delivery vehicle capable of achieving bridging in the challenging composite defect model that is comparable to that achieved with a well-established alginate-based delivery system. STATEMENT OF SIGNIFICANCE: We have previously established a model of musculoskeletal trauma that exhibits impaired bone healing. For the first time, this work shows that the early revascularization response is also significantly, albeit modestly, impaired. A decorin-supplemented collagen hydrogel was used for the first time in vivo as a delivery vehicle for both a cell-based vascular therapeutic, MVF, and an osteoinductive growth factor, BMP-2. While MVF did not improve vascular volume or bone healing, collagen + DCN is a BMP-2 delivery vehicle capable of achieving bridging in the challenging composite defect model. Based on its support of robust angiogenesis in vitro, collagen + DCN may be extended for future use with other vascular therapeutics such as pre-formed vascular networks.

Tissue Engineering of the Microvasculature

The ability to generate new microvessels in desired numbers and at desired locations has been a long-sought goal in vascular medicine, engineering, and biology. Historically, the need to revascularize ischemic tissues nonsurgically (so-called therapeutic vascularization) served as the main driving force for the development of new methods of vascular growth. More recently, vascularization of engineered tissues and the generation of vascularized microphysiological systems have provided additional targets for these methods, and have required adaptation of therapeutic vascularization to biomaterial scaffolds and to microscale devices. Three complementary strategies have been investigated to engineer microvasculature: angiogenesis (the sprouting of existing vessels), vasculogenesis (the coalescence of adult or progenitor cells into vessels), and microfluidics (the vascularization of scaffolds that possess the open geometry of microvascular networks). Over the past several decades, vascularization techniques have grown tremendously in sophistication, from the crude implantation of arteries into myocardial tunnels by Vineberg in the 1940s, to the current use of micropatterning techniques to control the exact shape and placement of vessels within a scaffold. This review provides a broad historical view of methods to engineer the microvasculature, and offers a common framework for organizing and analyzing the numerous studies in this area of tissue engineering and regenerative medicine. © 2019 American Physiological Society. Compr Physiol 9:1155-1212, 2019.

Tissue Engineering in Pediatric Bladder Reconstruction-The Road to Success

Several congenital disorders can cause end stage bladder disease and possibly renal damage in children. The current gold standard therapy is enterocystoplasty, a bladder augmentation using an intestinal segment. However, the use of bowel tissue is associated with numerous complications such as metabolic disturbance, stone formation, urine leakage, chronic infections, and malignancy. Urinary diversions using engineered bladder tissue would obviate the need for bowel for bladder reconstruction. Despite impressive progress in the field of bladder tissue engineering over the past decades, the successful transfer of the approach into clinical routine still represents a major challenge. In this review, we discuss major achievements and challenges in bladder tissue regeneration with a focus on different strategies to overcome the obstacles and to meet the need for living functional tissue replacements with a good growth potential and a long life span matching the pediatric population.

Improved Long-Term Volume Retention of Stromal Vascular Fraction Gel Grafting with Enhanced Angiogenesis and Adipogenesis

BACKGROUND

The apoptosis of mature adipocytes after fat grafting can result in chronic inflammation, absorption, and fibrosis, leading to unpredictable outcomes. Selective elimination of mature adipocytes may result in better outcomes and a different underlying retention mode. The authors previously developed a mature adipocyte-free product, stromal vascular fraction gel, derived from lipoaspirate, which eliminates adipocytes and preserves the stromal vascular fraction. This study investigated the retention and regeneration mode of stromal vascular fraction gel grafting.

METHODS

Nude mice were grafted with human-derived stromal vascular fraction gel or Coleman fat. Detailed cellular events over 3 months were investigated histologically and immunohistochemically.

RESULTS

The retention rate 90 days after grafting was significantly higher for stromal vascular fraction gel grafts than for standard Coleman fat (82 ± 15 percent versus 42 ± 9 percent; p < 0.05). Histologic analysis suggested that, unlike Coleman fat grafts, stromal vascular fraction gel grafts did not include significant necrotic areas. Moreover, although adipose tissue regeneration was found in grafts of both groups, rapid angiogenesis and macrophage infiltration were observed at a very early stage after stromal vascular fraction gel grafting. The presence of small preadipocytes with multiple intracellular lipid droplets in stromal vascular fraction gel grafts on day 3 also suggested very early adipogenesis. Although some of the cells in the stromal vascular fraction survived in stromal vascular fraction gel grafts, most of the newly formed adipose tissue was host-derived.

CONCLUSION

Stromal vascular fraction gel has a high long-term retention rate and a unique adipose regeneration mode, involving prompt inflammation and infiltration of immune cells, stimulating rapid angiogenesis and inducing host cell-mediated adipogenesis.

Tamoxifen-Prefabricated Beige Adipose Tissue Improves Fat Graft Survival in Mice

BACKGROUND

Fat grafting has become an important tool for breast reconstruction in breast cancer patients. Tamoxifen, the hormone therapy agent most frequently used for breast cancer, can affect adipose metabolism and cause browning of adipose tissue. This study hypothesized that tamoxifen could increase fat graft survival by altering adipose metabolism.

METHODS

C57/BL6 mice were divided into three groups receiving different treatments before and after fat grafting. The tamoxifen/grafting/tamoxifen group was pretreated with daily tamoxifen for 8 weeks, received fat grafting, and was treated with daily tamoxifen. The graft/tamoxifen group was pretreated with daily phosphate-buffered saline for 8 weeks, received fat grafting, and was treated with daily tamoxifen. The control group was pretreated with daily phosphate-buffered saline for 8 weeks, received fat grafting, and was treated with daily phosphate-buffered saline. The inguinal fat used for transplantation and the transferred fat at weeks 4 and 12 after transplantation were harvested and analyzed.

RESULTS

Tamoxifen-pretreated inguinal fat showed beige fat features, with smaller adipocyte size, up-regulated uncoupling protein 1 expression, and improved vascularization. The retention rate of transferred fat was significantly higher in the tamoxifen/grafting/tamoxifen group than in the control group (69 ± 12 percent versus 36 ± 13 percent; p < 0.05), but fat grafts in the graft/tamoxifen group had a retention rate similar to that in the control group (31 ± 12 percent versus 36 ± 13 percent; p > 0.05). Improved angiogenesis and increased vascular endothelial growth factor expression were found in the tamoxifen/grafting/tamoxifen group but not in the graft/tamoxifen group.

CONCLUSIONS

Tamoxifen treatment before fat grafting resulted in prefabricated vascularized beige fat with small adipocytes, which greatly improve fat graft survival. However, tamoxifen after fat grafting did not affect fat graft evolution.

* Skeletal Myoblast-Seeded Vascularized Tissue Scaffolds in the Treatment of a Large Volumetric Muscle Defect in the Rat Biceps Femoris Muscle

High velocity impact injuries can often result in loss of large skeletal muscle mass, creating defects devoid of matrix, cells, and vasculature. Functional regeneration within these regions of large volumetric muscle loss (VML) continues to be a significant clinical challenge. Large cell-seeded, space-filling tissue-engineered constructs that may augment regeneration require adequate vascularization to maintain cell viability. However, the long-term effect of improved vascularization and the effect of addition of myoblasts to vascularized constructs have not been determined in large VMLs. Here, our objective was to create a new VML model, consisting of a full-thickness, single muscle defect, in the rat biceps femoris muscle, and evaluate the ability of myoblast-seeded vascularized collagen hydrogel constructs to augment VML regeneration. Adipose-derived microvessels were cultured with or without myoblasts to form vascular networks within collagen constructs. In the animal model, the VML injury was created in the left hind limb, and treated with the harvested autograft itself, constructs with microvessel fragments (MVF) only, constructs with microvessels and myoblasts (MVF+Myoblasts), or left empty. We evaluated the formation of vascular networks in vitro by light microscopy, and the capacity of vascularized constructs to augment early revascularization and muscle regeneration in the VML using perfusion angiography and creatine kinase activity, respectively. Myoblasts (Pax7+) were able to differentiate into myotubes (sarcomeric myosin MF20+) in vitro. The MVF+Myoblast group showed longer and more branched microvascular networks than the MVF group in vitro, but showed similar overall defect site vascular volumes at 2 weeks postimplantation by microcomputed tomography angiography. However, a larger number of small-diameter vessels were observed in the vascularized construct-treated groups. Yet, both vascularized implant groups showed primarily fibrotic tissue with adipose infiltration, poor maintenance of tissue volume within the VML, and little muscle regeneration. These data suggest that while vascularization may play an important supportive role, other factors besides adequate vascularity may determine the fate of regenerating volumetric muscle defects.

Prevascularization in tissue engineering: Current concepts and future directions

The survival of engineered tissue constructs during the initial phase after their implantation depends on the rapid development of an adequate vascularization. This, in turn, is a major prerequisite for the constructs' long-term function. 'Prevascularization' has emerged as a promising concept in tissue engineering, aiming at the generation of a preformed microvasculature in tissue constructs prior to their implantation. This should shorten the time period during which the constructs are avascular and suffer hypoxic conditions. Herein, we provide an overview of current strategies for the generation of preformed microvascular networks within tissue constructs. In vitro approaches use cell seeding, spheroid formation or cell sheet technologies. In situ approaches use the body as a natural bioreactor to induce vascularization by angiogenic ingrowth or flap and arteriovenous (AV)-loop techniques. In future, these strategies may be supplemented by the transplantation of adipose tissue-derived microvascular fragments or the in vitro generation of highly organized microvascular networks by means of sophisticated microscale technologies and microfluidic systems. The further advancement of these prevascularization concepts and their adaptation to individual therapeutic interventions will markedly contribute to a broad implementation of tissue engineering applications into clinical practice.

Analyzing Structure and Function of Vascularization in Engineered Bone Tissue by Video-Rate Intravital Microscopy and 3D Image Processing

Vascularization is a key challenge in tissue engineering. Three-dimensional structure and microcirculation are two fundamental parameters for evaluating vascularization. Microscopic techniques with cellular level resolution, fast continuous observation, and robust 3D postimage processing are essential for evaluation, but have not been applied previously because of technical difficulties. In this study, we report novel video-rate confocal microscopy and 3D postimage processing techniques to accomplish this goal. In an immune-deficient mouse model, vascularized bone tissue was successfully engineered using human bone marrow mesenchymal stem cells (hMSCs) and human umbilical vein endothelial cells (HUVECs) in a poly (D,L-lactide-co-glycolide) (PLGA) scaffold. Video-rate (30 FPS) intravital confocal microscopy was applied in vitro and in vivo to visualize the vascular structure in the engineered bone and the microcirculation of the blood cells. Postimage processing was applied to perform 3D image reconstruction, by analyzing microvascular networks and calculating blood cell viscosity. The 3D volume reconstructed images show that the hMSCs served as pericytes stabilizing the microvascular network formed by HUVECs. Using orthogonal imaging reconstruction and transparency adjustment, both the vessel structure and blood cells within the vessel lumen were visualized. Network length, network intersections, and intersection densities were successfully computed using our custom-developed software. Viscosity analysis of the blood cells provided functional evaluation of the microcirculation. These results show that by 8 weeks, the blood vessels in peripheral areas function quite similarly to the host vessels. However, the viscosity drops about fourfold where it is only 0.8 mm away from the host. In summary, we developed novel techniques combining intravital microscopy and 3D image processing to analyze the vascularization in engineered bone. These techniques have broad applicability for evaluating vascularization in other engineered tissues as well.

Vascularization in bone tissue engineering constructs

Vascularization of large bone grafts is one of the main challenges of bone tissue engineering (BTE), and has held back the clinical translation of engineered bone constructs for two decades so far. The ultimate goal of vascularized BTE constructs is to provide a bone environment rich in functional vascular networks to achieve efficient osseointegration and accelerate restoration of function after implantation. To attain both structural and vascular integration of the grafts, a large number of biomaterials, cells, and biological cues have been evaluated. This review will present biological considerations for bone function restoration, contemporary approaches for clinical salvage of large bone defects and their limitations, state-of-the-art research on the development of vascularized bone constructs, and perspectives on evaluating and implementing novel BTE grafts in clinical practice. Success will depend on achieving full graft integration at multiple hierarchical levels, both between the individual graft components as well as between the implanted constructs and their surrounding host tissues. The paradigm of vascularized tissue constructs could not only revolutionize the progress of BTE, but could also be readily applied to other fields in regenerative medicine for the development of new innovative vascularized tissue designs.

In vitro osteogenic differentiation of adipose-derived mesenchymal stem cell spheroids impairs their in vivo vascularization capacity inside implanted porous polyurethane scaffolds

Undifferentiated adipose-derived mesenchymal stem cell (adMSC) spheroids are attractive vascularization units for tissue engineering. Their osteogenic differentiation further offers the possibility of directed generation of bone constructs. The aim of this study was to analyze how this differentiation affects their in vivo vascularization capacity. Green fluorescent protein (GFP)-positive adMSCs were isolated from C57BL/6-TgN(ACTB-EGFP)1Osb/J mice for the generation of undifferentiated and differentiated spheroids using the liquid overlay technique. Subsequently, polyurethane scaffolds were seeded with these spheroids and successful osteogenic differentiation was proven by von Kossa staining and high-resolution microtomography. The scaffolds were then implanted into dorsal skinfold chambers of C57BL/6 wild-type mice to analyze their vascularization and incorporation using intravital fluorescence microscopy, histology and immunohistochemistry. Scaffolds seeded with differentiated spheroids exhibited a markedly impaired vascularization. Immunohistochemical analyses revealed that this was caused by the lost ability of differentiated spheroids to form GFP-positive microvascular networks inside the scaffolds. This was associated with a reduced tissue incorporation of the implants. Moreover, they no longer exhibited a mineralized matrix after the 14day implantation period, indicating the dedifferentiation of the spheroids under the given in vivo conditions. These findings indicate that osteogenic differentiation of adMSC spheroids markedly impairs their vascularization capacity. Hence, it may be reasonable to combine adMSC spheroids of varying differentiation stages in scaffolds for bone tissue engineering to promote both vascularization and bone formation.

Vascularization strategies for bone regeneration

The functional regeneration of thick vascularized tissues such as bone and muscle is complicated by the large volume of lost tissue, challenging biomechanical environment, and the need to reproduce the highly organized structure of both the native tissue extracellular matrix and its vascular support system. Stem cell or progenitor cell delivery approaches, for example, continue to be plagued by low viability and engraftment in part due to the initial absence of a vascular supply. Recognition of diffusion limitations in thick tissues has prompted regenerative strategies that seek to accelerate establishment of a functional vasculature. The successful design of robust regeneration strategies for these challenging clinical scenarios will rely on a thorough understanding of interactions between construct design parameters and host biological and biomechanical factors. Here, we discuss the critical role of vascularization in normal bone tissue homeostasis and repair, vascular network adaptation to the local biomechanical environment, and the future directions of revascularization approaches being developed and integrated with bone regeneration strategies.

Vascularization and cellular isolation potential of a novel electrospun cell delivery vehicle

A clinical need exists for a cell delivery device that supports long-term cell viability, cell retention within the device and retrieval of delivered cells if necessary. Previously, cell isolation devices have been based on hollow fiber membranes, porous polymer scaffolds, alginate systems, or micro-machined membranes. We present the development and characterization of a novel dual porosity electrospun membrane based device, which supports cellular infiltration and vascularization of its outer porous layer and maintains cellular isolation within a lumen bounded by an inner low porosity layer. Electrospinning conditions were initially established to support electrospun fiber deposition onto nonconductive silicone surfaces. With these parameters established, devices for in vivo evaluations were produced using nylon as a nonconductive scaffold for deposition of dual porosity electrospun fibers. The outer porous layer supported the development of a penetrating microcirculation and the membrane supported the transfer of insulin from encapsulated sustained release pellets for 4 weeks. Viable cells implanted within the device could be identified after 2 weeks of implantation. Through the successful demonstration of survival and cellular isolation of human epithelial cells within the implanted devices and the ability to use the device to deliver insulin, we have established the utility of this device toward localized cell transplantation. The cell delivery device establishes a platform to test the feasibility of approaches to cell dose control and cell localization at the site of implantation in the clinical use of modified autologous or allogeneic cells.

Vitalization of porous polyethylene (Medpor®) with chondrocytes promotes early implant vascularization and incorporation into the host tissue

Porous polyethylene (Medpor(®)) is frequently used in craniofacial reconstructive surgery. The successful incorporation of this alloplastic biomaterial depends on adequate vascularization. Here, we analyzed whether the early vascularization of porous polyethylene can be accelerated by vitalization with human chondrocytes. For this purpose, small polyethylene samples were coated with platelet-rich plasma (PRP) or a suspension of PRP and human chondrocytes. Uncoated polyethylene samples served as controls. Subsequently, the samples were implanted into the dorsal skinfold chamber of CD-1 nude mice to repetitively analyze their vascularization and biocompatibility by means of intravital fluorescence microscopy. PRP-chondrocyte-coated polyethylene exhibited an accelerated and improved vascularization when compared with the other two groups. This was indicated by a significantly higher functional capillary density of the microvascular network developing around the implants. Moreover, a leukocyte-endothelial cell interaction was found in a physiological range at the implantation site of all three groups, demonstrating that the vitalization with PRP and chondrocytes did not affect the good biocompatibility of the alloplastic material. Additional histological, immunohistochemical, and in situ hybridization analyses revealed that the chondrocytes formed a bioprotective tissue layer, which prevented the accumulation of macrophages and foreign body giant cells on the polyethylene surface. These findings clearly indicate that vitalization of polyethylene with chondrocytes promotes early implant vascularization and incorporation into the host tissue and, thus, may be a promising approach that prevents postoperative complications such as implant extrusion, migration, and infection.