Fibrin-based model for cartilage regeneration: tissue maturation from in vitro to in vivo

Outcomes following gel-based autologous chondrocyte implantation for articular cartilage defects of the knee

BACKGROUND

Gel-based autologous chondrocyte implantation (GACI) enables a simpler and more effective delivery of chondrocytes with reproducible three-dimensional structural restoration of the articular cartilage surface. There is limited documentation of medium-term outcomes. This study assessed safety and effectiveness of GACI for treatment of cartilage defects of the knee.

METHODS

This multicentric retrospective study was conducted across eight hospitals in India. Patients who had undergone GACI (CARTIGROW®) between 2008 and 2014 for the treatment of focal articular cartilage defects of the knee (mean defect size 4.5 ± 5.8 cm2) in limbs with normal alignment were analyzed. Primary outcomes were changes in Lysholm Knee Scoring Scale score, and Knee Outcome Sports Activity Scale (SAS).

RESULTS

A total of 107 patients (110 knee joints) with mean age 31.0 ± 10.5 years were included. The mean follow-up was 9.8 ± 1.5 years (range 7.85-13.43). Majority had osteochondritis dissecans (n = 51; 46.4%). The mean Lysholm Knee Scoring Scale score (81.23 ± 13.21 vs. 51.32 ± 17.89; p < 0.0001) and SAS score (80.93 ± 8.26 vs. 28.11 ± 12.28; p < 0.0001) improved significantly at follow-up as compared to pre-operative. Magnetic Resonance Observation of Cartilage Repair Tissue score in 39 patients at minimum 2 years follow-up was 84.5 ± 4.3. Among 30 patients who were playing sports before treatment, 17 patients (56.7%) could return to the same or higher level of sports post-transplantation. No major intra-operative or post-operative complications were noted. Four patients warranted revision surgery.

CONCLUSION

GACI is an effective treatment option for large focal articular cartilage defects of the knee with a low complication rate and revision rate and significant improvement in functional scores.

Endostatin in 3D Fibrin Hydrogel Scaffolds Promotes Chondrogenic Differentiation in Swine Neonatal Meniscal Cells

The success of cell-based approaches for the treatment of cartilage or fibro-cartilaginous tissue defects requires an optimal cell source with chondrogenic differentiation ability that maintains its differentiated properties and stability following implantation. For this purpose, the aim of this study was to evaluate the use of endostatin (COL18A1), an anti-angiogenic factor, which is physiologically involved in cell differentiation during meniscus development. Swine neonatal meniscal cells not yet subjected to mechanical stimuli were extracted, cultured in fibrin hydrogel scaffolds, and treated at two different time points (T1 = 9 days and T2 = 21 days) with different concentrations of COL18A1 (10 ng/mL; 100 ng/mL; 200 ng/mL). At the end of the treatments, the scaffolds were examined through biochemical, molecular, and histochemical analyses. The results showed that the higher concentration of COL18A1 promotes a fibro-chondrogenic phenotype and improves cellularity index (DNA content, p < 0.001) and cell efficiency (GAGs/DNA ratio, p < 0.01) after 21 days. These data are supported by the molecular analysis of collagen type I (COL1A1, a marker of fibrous-like tissue, p < 0.001), collagen type II (COL2A1, a marker of cartilaginous-like tissue, p < 0.001) and SRY-Box Transcription Factor 9 (SOX9, an early marker of chondrogenicity, p < 0.001), as well as by histological analysis (Safranin-O staining), laying the foundations for future studies evaluating the involvement of 3D endostatin hydrogel scaffolds in the differentiation of avascular tissues.

Musculoskeletal tissues-on-a-chip: role of natural polymers in reproducing tissue-specific microenvironments

Over the past years, 3D in vitro models have been widely employed in the regenerative medicine field. Among them, organ-on-a-chip technology has the potential to elucidate cellular mechanism exploiting multichannel microfluidic devices to establish 3D co-culture systems that offer control over the cellular, physico-chemical and biochemical microenvironments. To deliver the most relevant cues to cells, it is of paramount importance to select the most appropriate matrix for mimicking the extracellular matrix of the native tissue. Natural polymers-based hydrogels are the elected candidates for reproducing tissue-specific microenvironments in musculoskeletal tissue-on-a-chip models owning to their interesting and peculiar physico-chemical, mechanical and biological properties. Despite these advantages, there is still a gap between the biomaterials complexity in conventional tissue engineering and the application of these biomaterials in 3D in vitro microfluidic models. In this review, the aim is to suggest the adoption of more suitable biomaterials, alternative crosslinking strategies and tissue engineered-inspired approaches in organ-on-a-chip to better mimic the complexity of physiological musculoskeletal tissues. Accordingly, after giving an overview of the musculoskeletal tissue compositions, the properties of the main natural polymers employed in microfluidic systems are investigated, together with the main musculoskeletal tissues-on-a-chip devices.

Meniscus Matrix Structural and Biomechanical Evaluation: Age-Dependent Properties in a Swine Model

The analysis of the morphological, structural, biochemical, and mechanical changes of the Extracellular Matrix (ECM), which occur during meniscus development, represents the goal of the present study. Medial fully developed menisci (FD, 9-month-old pigs), partially developed menisci (PD, 1-month-old piglets), and not developed menisci (ND, from stillbirths) were collected. Cellularity and glycosaminoglycans (GAGs) deposition were evaluated by ELISA, while Collagen 1 and aggrecan were investigated by immunohistochemistry and Western blot analyses in order to be compared to the biomechanical properties of traction and compression tensile forces, respectively. Cellularity decreased from ND to FD and GAGs showed the opposite trend (p < 0.01 both). Collagen 1 decreased from ND to FD, as well as the ability to resist to tensile traction forces (p < 0.01), while aggrecan showed the opposite trend, in accordance with the biomechanics: compression test showed that FD meniscus greatly resists to deformation (p < 0.01). This study demonstrated that in swine meniscus, clear morphological and biomechanical changes follow the meniscal maturation and specialization during growth, starting with an immature pattern (ND) to the mature organized meniscus of the FD, and they could be useful to understand the behavior of this structure in the light of its tissue bioengineering.

Bioprinting of Cartilage with Bioink Based on High-Concentration Collagen and Chondrocytes

The study was aimed at the applicability of a bioink based on 4% collagen and chondrocytes for de novo cartilage formation. Extrusion-based bioprinting was used for the biofabrication. The printing parameters were tuned to obtain stable material flow. In vivo data proved the ability of the tested bioink to form a cartilage within five to six weeks after the subcutaneous scaffold implantation. Certain areas of cartilage formation were detected as early as in one week. The resulting cartilage tissue had a distinctive structure with groups of isogenic cells as well as a high content of glycosaminoglycans and type II collagen.

In Vivo Cartilage Regeneration with Cell-Seeded Natural Biomaterial Scaffold Implants: 15-Year Study

Articular cartilage can be easily damaged from human's daily activities, leading to inflammation and to osteoarthritis, a situation that can diminish the patients' quality of life. For larger cartilage defects, scaffolds are employed to provide cells the appropriate three-dimensional environment to proliferate and differentiate into healthy cartilage tissue. Natural biomaterials used as scaffolds, attract researchers' interest because of their relative nontoxic nature, their abundance as natural products, their easy combination with other materials, and the relative easiness to establish Marketing Authorization. The last 15 years were chosen to review, document, and elucidate the developments on cell-seeded natural biomaterials for articular cartilage treatment in vivo. The parameters of the experimental designs and their results were all documented and presented. Considerations about the newly formed cartilage and the treatment of cartilage defects were discussed, along with difficulties arising when applying natural materials, research limitations, and tissue engineering approaches for hyaline cartilage regeneration.

Atelocollagen promotes chondrogenic differentiation of human adipose-derived mesenchymal stem cells

Effective engineering approaches for cartilage regeneration involve a combination of cells and biomaterial scaffolds. Multipotent mesenchymal stem cells (MSCs) are important sources for cartilage regeneration. Atelocollagen provides a suitable substrate for MSC attachment and enhancing chondrogenic differentiation. Here, we assessed the chondrogenic potential of adipose tissue derived human MSCs (hMSCs) mixed with atelocollagen gel. We observed cell attachment, viability, and microstructures by electron microscopy over 21 days. The levels of Sox9, type II collagen, aggrecan, type I collagen, Runx2, type X collagen, ALP, Osterix, and MMP13 were measured by RT-qPCR. Cartilage matrix-related proteins were assessed by enzyme-linked immunosorbent assay (ELISA), histology, and immunohistochemistry. hMSCs of all groups exhibited well-maintained cell survival, distribution and morphology. Abundant type II collagen fibers developed on day 21; while Sox9, type II collagen, and aggrecan expression increased over time in the atelocollagen group. However, type I collagen, RUNX2, type X collagen (CoL10A1), Osterix, and ALP were not expressed. These results corroborated the protein expression detected by ELISA. Further, histological analysis revealed lacunae-like structures, while staining demonstrated glycosaminoglycan accumulation. Cumulatively, these results indicate that atelocollagen scaffolds improve hMSC chondrogenic differentiation and are a potential approach for cartilage regeneration.

In Vitro Evaluation of the Influence of Substrate Mechanics on Matrix-Assisted Human Chondrocyte Transplantation

Matrix-assisted chondrocyte transplantation (MACT) is of great interest for the treatment of patients with cartilage lesions. However, the roles of the matrix properties in modulating cartilage tissue integration during MACT recovery have not been fully understood. The objective of this study was to uncover the effects of substrate mechanics on the integration of implanted chondrocyte-laden hydrogels with native cartilage tissues. To this end, agarose hydrogels with Young’s moduli ranging from 0.49 kPa (0.5%, w/v) to 23.08 kPa (10%) were prepared and incorporated into an in vitro human cartilage explant model. The hydrogel-cartilage composites were cultivated for up to 12 weeks and harvested for evaluation via scanning electron microscopy, histology, and a push-through test. Our results demonstrated that integration strength at the hydrogel-cartilage interface in the 1.0% (0.93 kPa) and 2.5% (3.30 kPa) agarose groups significantly increased over time, whereas hydrogels with higher stiffness (>8.78 kPa) led to poor integration with articular cartilage. Extensive sprouting of extracellular matrix in the interfacial regions was only observed in the 0.5% to 2.5% agarose groups. Collectively, our findings suggest that while neocartilage development and its integration with native cartilage are modulated by substrate elasticity, an optimal Young’s modulus (3.30 kPa) possessed by agarose hydrogels is identified such that superior quality of tissue integration is achieved without compromising tissue properties of implanted constructs.

Proliferation medium in three-dimensional culture of auricular chondrocytes promotes effective cartilage regeneration in vivo

INTRODUCTION

Cartilage regeneration have been attracted attentions because of the poor ability of cartilage tissues to regenerate. Three-dimensional (3D) culture of chondrocytes is considered to be advantageous for cartilage regeneration. Although it is plausible that maturation of the constructs before transplantation positively affects the chondrogenesis, matured constructs after cultures for longer periods do not necessarily result in effective cartilage regeneration. In this study, we compared different types of culture media including growth factors which are clinically available. We prepared differentiation medium containing insulin-like growth factor-1 (IGF-1), proliferation medium containing fibroblast growth factor-2 (FGF-2) and insulin, and combination of them, and compared their efficacies on chondrogenesis when used in 3D culture of engineered cartilage constructs.

METHODS

Cartilage constructs were fabricated by auricular chondrocytes and atelocollagen, and they were 3D-cultured with four types of media: control medium, differentiation medium, proliferation medium, and combination medium. After 3 weeks of culture, the constructs were analyzed for cell number, gene and protein expressions and mechanical properties. The constructs were also transplanted into nude mice. After 8 weeks, the degree of cartilage regeneration was evaluated. Constructs manufactured with canine auricular chondrocytes were subjected to autologous transplantation into beagles and examined for cartilage regeneration.

RESULTS

During 3D culture, remarkably high gene expression of type II collagen was detected in the construct cultured with the differentiation medium whereas cell apoptosis were suppressed in the proliferation medium. When transplanted into nude mice, the constructs 3D-cultured in the proliferation medium produced abundant cartilage matrices. In autologous implantation model, the construct cultured in the proliferation medium again showed better chondrogenesis than those in other media.

CONCLUSIONS

The present study indicates that 3D culture with the proliferation medium maintains the cell viability to potentiate the subsequent cartilage regeneration. Here, we propose that not only differentiation but also high cell viability accompanied by proliferation factors should be taken into account to improve cartilage regeneration.

Swine Meniscus: Are Femoral-Tibial Surfaces Properly Tuned to Bear the Forces Exerted on the Tissue?

IMPACT STATEMENT

The importance of the present study is linked to how the contact forces act on the knee meniscus in particular, considering the femoral condyles and tibial plateau: this can be useful as a base for the ultimate creation of tissue-engineered biphasic scaffolds, which can mimic the native tissue complex, for meniscal repair or regeneration.

In vivo evaluation of stem cell aggregates on osteochondral regeneration

To date, many osteochondral regenerative approaches have utilized varied combinations of biocompatible materials and cells to engineer cartilage. Even in cell-based approaches, to date, no study has utilized stem cell aggregates alone for regenerating articular cartilage. Thus, the purpose of this study was to evaluate the performance of a novel stem cell-based aggregate approach in a fibrin carrier to regenerate osteochondral defects in the Sprague-Dawley rat trochlear groove model. Two different densities of rat bone marrow mesenchymal stem cell (rBMSC) aggregates were fabricated by the hanging drop technique. At 8 weeks, the cell aggregates supported the defects and served as a catalyst for neo-cartilage synthesis, and the experimental groups may have been beneficial for bone and cartilage regeneration compared to the fibrin-only control and sham groups, as evidenced by histological assessment. The cell density of rBMSC aggregates may thus directly impact chondrogenesis. The usage of cell aggregates with fibrin as a cell-based technology is a promising and translational new treatment strategy for repair of cartilage defects. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1606-1616, 2017.

Analyzing Biological Performance of 3D-Printed, Cell-Impregnated Hybrid Constructs for Cartilage Tissue Engineering

Three-dimensional (3D) bioprinting of hybrid constructs is a promising biofabrication method for cartilage tissue engineering because a synthetic polymer framework and cell-impregnated hydrogel provide structural and biological features of cartilage, respectively. During bioprinting, impregnated cells may be subjected to high temperatures (caused by the adjacent melted polymer) and process-induced mechanical forces, potentially compromising cell function. This study addresses these biofabrication issues, evaluating the heat distribution of printed polycaprolactone (PCL) strands and the rheological property and structural stability of alginate hydrogels at various temperatures and concentrations. The biocompatibility of parameters from these studies was tested by culturing 3D hybrid constructs bioprinted with primary cells from embryonic chick cartilage. During initial two-dimensional culture expansion of these primary cells, two morphologically and molecularly distinct cell populations ("rounded" and "fibroblastic") were isolated. The biological performance of each population was evaluated in 3D hybrid constructs separately. The cell viability, proliferation, and cartilage differentiation were observed at high levels in hybrid constructs of both cell populations, confirming the validity of these 3D bioprinting parameters for effective cartilage tissue engineering. Statistically significant performance variations were observed, however, between the rounded and fibroblastic cell populations. Molecular and morphological data support the notion that such performance differences may be attributed to the relative differentiation state of rounded versus fibroblastic cells (i.e., differentiated chondrocytes vs. chondroprogenitors, respectively), which is a relevant issue for cell-based tissue engineering strategies. Taken together, our study demonstrates that bioprinting 3D hybrid constructs of PCL and cell-impregnated alginate hydrogel is a promising approach for cartilage tissue engineering.

Ear-Shaped Stable Auricular Cartilage Engineered from Extensively Expanded Chondrocytes in an Immunocompetent Experimental Animal Model

Advancement of engineered ear in clinical practice is limited by several challenges. The complex, largely unsupported, three-dimensional auricular neocartilage structure is difficult to maintain. Neocartilage formation is challenging in an immunocompetent host due to active inflammatory and immunological responses. The large number of autologous chondrogenic cells required for engineering an adult human-sized ear presents an additional challenge because primary chondrocytes rapidly dedifferentiate during in vitro culture. The objective of this study was to engineer a stable, human ear-shaped cartilage in an immunocompetent animal model using expanded chondrocytes. The impact of basic fibroblast growth factor (bFGF) supplementation on achieving clinically relevant expansion of primary sheep chondrocytes by in vitro culture was determined. Chondrocytes expanded in standard medium were either combined with cryopreserved, primary passage 0 chondrocytes at the time of scaffold seeding or used alone as control. Disk and human ear-shaped scaffolds were made from porous collagen; ear scaffolds had an embedded, supporting titanium wire framework. Autologous chondrocyte-seeded scaffolds were implanted subcutaneously in sheep after 2 weeks of in vitro incubation. The quality of the resulting neocartilage and its stability and retention of the original ear size and shape were evaluated at 6, 12, and 20 weeks postimplantation. Neocartilage produced from chondrocytes that were expanded in the presence of bFGF was superior, and its quality improved with increased implantation time. In addition to characteristic morphological cartilage features, its glycosaminoglycan content was high and marked elastin fiber formation was present. The overall shape of engineered ears was preserved at 20 weeks postimplantation, and the dimensional changes did not exceed 10%. The wire frame within the engineered ear was able to withstand mechanical forces during wound healing and neocartilage maturation and prevented shrinkage and distortion. This is the first demonstration of a stable, ear-shaped elastic cartilage engineered from auricular chondrocytes that underwent clinical-scale expansion in an immunocompetent animal over an extended period of time.

Tissue-engineering strategies to repair joint tissue in osteoarthritis: nonviral gene-transfer approaches

Loss of articular cartilage is a common clinical consequence of osteoarthritis (OA). In the past decade, substantial progress in tissue engineering, nonviral gene transfer, and cell transplantation have provided the scientific foundation for generating cartilaginous constructs from genetically modified cells. Combining tissue engineering with overexpression of therapeutic genes enables immediate filling of a cartilage defect with an engineered construct that actively supports chondrogenesis. Several pioneering studies have proved that spatially defined nonviral overexpression of growth-factor genes in constructs of solid biomaterials or hydrogels is advantageous compared with gene transfer or scaffold alone, both in vitro and in vivo. Notably, these investigations were performed in models of focal cartilage defects, because advanced cartilage-repair strategies based on the principles of tissue engineering have not advanced sufficiently to enable resurfacing of extensively degraded cartilage as therapy for OA. These studies serve as prototypes for future technological developments, because they raise the possibility that cartilage constructs engineered from genetically modified chondrocytes providing autocrine and paracrine stimuli could similarly compensate for the loss of articular cartilage in OA. Because cartilage-tissue-engineering strategies are already used in the clinic, combining tissue engineering and nonviral gene transfer could prove a powerful approach to treat OA.

Cardiac extracellular matrix-fibrin hybrid scaffolds with tunable properties for cardiovascular tissue engineering

Solubilized cardiac extracellular matrix (ECM) is being developed as an injectable therapeutic that offers promise for promoting cardiac repair. However, the ECM alone forms a hydrogel that is very soft compared to the native myocardium. As both the stiffness and composition of the ECM are important in regulating cell behavior and can have complex synergistic effects, we sought to develop an ECM-based scaffold with tunable biochemical and mechanical properties. We used solubilized rat cardiac ECM from two developmental stages (neonatal, adult) combined with fibrin hydrogels that were cross-linked with transglutaminase. We show that ECM was retained within the gels and that the Young's modulus could be tuned to span the range of the developing and mature heart. C-kit+ cardiovascular progenitor cells from pediatric patients with congenital heart defects were seeded into the hybrid gels. Both the elastic modulus and composition of the scaffolds impacted the expression of endothelial and smooth muscle cell genes. Furthermore, we demonstrate that the hybrid gels are injectable, and thus have potential for minimally invasive therapies. ECM-fibrin hybrid scaffolds offer new opportunities for exploiting the effects of both composition and mechanical properties in directing cell behavior for tissue engineering.

Crosslinkable hydrogels derived from cartilage, meniscus, and tendon tissue

Decellularized tissues have proven to be versatile matrices for the engineering of tissues and organs. These matrices usually consist of collagens, matrix-specific proteins, and a set of largely undefined growth factors and signaling molecules. Although several decellularized tissues have found their way to clinical applications, their use in the engineering of cartilage tissue has only been explored to a limited extent. We set out to generate hydrogels from several tissue-derived matrices, as hydrogels are the current preferred cell carriers for cartilage repair. Equine cartilage, meniscus, and tendon tissue was harvested, decellularized, enzymatically digested, and functionalized with methacrylamide groups. After photo-cross-linking, these tissue digests were mechanically characterized. Next, gelatin methacrylamide (GelMA) hydrogel was functionalized with these methacrylated tissue digests. Equine chondrocytes and mesenchymal stromal cells (MSCs) (both from three donors) were encapsulated and cultured in vitro up to 6 weeks. Gene expression (COL1A1, COL2A1, ACAN, MMP-3, MMP-13, and MMP-14), cartilage-specific matrix formation, and hydrogel stiffness were analyzed after culture. The cartilage, meniscus, and tendon digests were successfully photo-cross-linked into hydrogels. The addition of the tissue-derived matrices to GelMA affected chondrogenic differentiation of MSCs, although no consequent improvement was demonstrated. For chondrocytes, the tissue-derived matrix gels performed worse compared to GelMA alone. This work demonstrates for the first time that native tissues can be processed into crosslinkable hydrogels for the engineering of tissues. Moreover, the differentiation of encapsulated cells can be influenced in these stable, decellularized matrix hydrogels.

Arthroscopic airbrush assisted cell implantation for cartilage repair in the knee: a controlled laboratory and human cadaveric study

OBJECTIVE

The objective of this study was to investigate the feasibility of arthroscopic airbrush assisted cartilage repair.

METHODS

An airbrush device (Baxter) was used to spray both human expanded osteoarthritic chondrocytes and choncrocytes with their pericellular matrix (chondrons) at 1 × 10(6) cells/ml fibrin glue (Tissucol, Baxter) in vitro. Depth-dependent cell viability was assessed for both methods with confocal microscopy. Constructs were cultured for 21 days to assess matrix production. A controlled human cadaveric study (n = 8) was performed to test the feasibility of the procedure in which defects were filled with either arthroscopic airbrushing or needle extrusion. All knees were subjected to 60 min of continuous passive motion and scored on outline attachment and defect filling.

RESULTS

Spraying both chondrocytes and chondrons in fibrin glue resulted in a homogenous cell distribution throughout the scaffold. No difference in viability or matrix production between application methods was found nor between chondrons and chondrocytes. The cadaveric study revealed that airbrushing was highly feasible, and that defect filling through needle extrusion was more difficult to perform based on fibrin glue adhesion and gravity-induced seepage. Defect outline and coverage scores were consistently higher for extrusion, albeit not statistically significant.

CONCLUSION

Both chondrons and chondrocytes can be evenly distributed in a sprayed fibrin glue scaffold without affecting viability while supporting matrix production. The airbrush technology is feasible, easier to perform than needle extrusion and allows for reproducible arthroscopic filling of cartilage defects.

Osteochondral repair by a novel interconnecting collagen-hydroxyapatite substitute: a large-animal study

A novel three-dimensional bicomponent substitute made of collagen type I and hydroxyapatite was tested for the repair of osteochondral lesions in a swine model. This scaffold was assembled by a newly developed method that guarantees the strict integration between the organic and the inorganic parts, mimicking the biological tissue between the chondral and the osseous phase. Thirty-six osteochondral lesions were created in the trochlea of six pigs; in each pig, two lesions were treated with scaffolds seeded with autologous chondrocytes (cell+group), two lesions were treated with unseeded scaffolds (cell- group), and the two remaining lesions were left untreated (untreated group). After 3 months, the animals were sacrificed and the newly formed tissue was analyzed to evaluate the degree of maturation. The International Cartilage Repair Society (ICRS) macroscopic assessment showed significantly higher scores in the cell- and untreated groups when compared with the cell+ group. Histological evaluation showed the presence of repaired tissue, with fibroblast-like and hyaline-like areas in all groups; however, with respect to the other groups, the cell- group showed significantly higher values in the ICRS II histological scores for "cell morphology" and for the "surface/superficial assessment." While the scaffold seeded with autologous chondrocytes promoted the formation of a reparative tissue with high cellularity but low glycosaminoglycans (GAG) production, on the contrary, the reparative tissue observed with the unseeded scaffold presented lower cellularity but higher and uniform GAG distribution. Finally, in the lesions treated with scaffolds, the immunohistochemical analysis showed the presence of collagen type II in the peripheral part of the defect, indicating tissue maturation due to the migration of local cells from the surroundings. This study showed that the novel osteochondral scaffold was easy to handle for surgical implantation and was stable within the site of lesion; at the end of the experimental time, all implants were well integrated with the surrounding tissue and no signs of synovitis were observed. The quality of the reparative tissue seemed to be superior for the lesions treated with the unseeded scaffolds, indicating the promising potential of this novel biomaterial for use in a one-stage procedure for osteochondral repair.

Tissue-engineered cartilage: the crossroads of biomaterials, cells and stimulating factors

Damage to cartilage represents one of the most challenging tasks of musculoskeletal therapeutics due to its limited propensity for healing and regenerative capabilities. Lack of current treatments to restore cartilage tissue function has prompted research in this rapidly emerging field of tissue regeneration of functional cartilage tissue substitutes. The development of cartilaginous tissue largely depends on the combination of appropriate biomaterials, cell source, and stimulating factors. Over the years, various biomaterials have been utilized for cartilage repair, but outcomes are far from achieving native cartilage architecture and function. This highlights the need for exploration of suitable biomaterials and stimulating factors for cartilage regeneration. With these perspectives, we aim to present an overview of cartilage tissue engineering with recent progress, development, and major steps taken toward the generation of functional cartilage tissue. In this review, we have discussed the advances and problems in tissue engineering of cartilage with strong emphasis on the utilization of natural polymeric biomaterials, various cell sources, and stimulating factors such as biophysical stimuli, mechanical stimuli, dynamic culture, and growth factors used so far in cartilage regeneration. Finally, we have focused on clinical trials, recent innovations, and future prospects related to cartilage engineering.

Meniscus maturation in the swine model: changes occurring along with anterior to posterior and medial to lateral aspect during growth

The meniscus plays important roles in knee function and mechanics and is characterized by a heterogeneous matrix composition. The changes in meniscus vascularization observed during growth suggest that the tissue-specific composition may be the result of a maturation process. This study has the aim to characterize the structural and biochemical variations that occur in the swine meniscus with age. To this purpose, menisci were collected from young and adult pigs and divided into different zones. In study 1, both lateral and medial menisci were divided into the anterior horn, the body and the posterior horn for the evaluation of glycosaminoglycans (GAGs), collagen 1 and 2 content. In study 2, the menisci were sectioned into the inner, the intermediate and the outer zones to determine the variations in the cell phenotype along with the inner–outer direction, through gene expression analysis. According to the results, the swine meniscus is characterized by an increasing enrichment in the cartilaginous component with age, with an increasing deposition in the anterior horn (GAGs and collagen 2; P < 0.01 both); moreover, this cartilaginous matrix strongly increases in the inner avascular and intermediate zone, as a consequence of a specific differentiation of meniscal cells towards a cartilaginous phenotype (collagen 2, P < 0.01). The obtained data add new information on the changes that accompany meniscus maturation, suggesting a specific response of meniscal cells to the regional mechanical stimuli in the knee joint.

Treatment of osteochondritis dissecans of the knee with a biomimetic scaffold. A prospective multicenter study

PURPOSE

the aim of the present study was to evaluate the clinical outcome of the treatment of osteochondritis dissecans (OCD) of the knee with a type-I collagen-hydroxyapatite nanostructural biomimetic osteochondral scaffold.

METHODS

twenty-three patients affected by symptomatic knee OCD of the femoral condyles, grade 3 or 4 of the International Cartilage Repair Society (ICRS) scale, underwent biomimetic scaffold implantation. The site of the defect was the medial femoral condyle in 14 patients, whereas in 9 patients the lateral femoral condyle was involved. The average size of the defects was 3.5±1.43 cm(2). All patients were clinically evaluated using the ICRS subjective score, the IKDC objective score, the EQ-VAS and the Tegner Activity Score. Minimum follow-up was two years. MRI was performed at 12 and 24 months after surgery and then every 12 months thereafter.

RESULTS

the ICRS subjective score improved from the baseline value of 50.93±20.6 to 76.44±18.03 at the 12 months (p<0.0005) and 82.23± 17.36 at the two-year follow-up (p<0.0005). The IKDC objective score confirmed the results. The EQ-VAS showed a significant improvement from 3.15±1.09 to 8.15±1.04 (p<0.0005) at two years of follow-up. The Tegner Activity Score improvement was statistically significant (p<0.0005).

CONCLUSIONS

biomimetic scaffold implantation was a good procedure for treating grade 3 and 4 OCD, in which other classic techniques are burdened by different limitations. This open one-step surgery gave promising stable results at short-term follow-up.

LEVEL OF EVIDENCE

Level IV, therapeutic case series.

Fibrin-mediated delivery of an ovarian follicle pool in a mouse model of infertility

The cryopreservation and autotransplantation of ovarian tissue is emerging as a powerful approach for preserving fertility. However, for cancer patients, it may not be possible to transplant ovarian tissue due to the risk of re-seeding disease. We investigated strategies for transplantation of individually isolated follicles to minimize the risk of re-introducing cancer cells present within the vasculature of ovarian stroma. Procedures for large-scale isolation of early-stage follicles and their encapsulation into fibrin hydrogels were developed. For in vivo validation studies, mice were ovariectomized and transplanted with encapsulated follicles into the ovarian bursa. A substantial increase in the number of secondary follicles was observed in the graft at 9 days after transplantation, and antral follicles by day 21, demonstrating primordial follicle recruitment into the growing pool. Initially, elevated follicle-stimulating hormone levels declined substantially by day 21, indicating feedback from the graft; presence of corpora lutea showed the graft's capability of restoring hormone cyclicity. Taken together, the transplanted follicles were able to engraft, mature, and restore ovarian function in an infertile mouse. This biomaterial may, thus, provide a platform for follicle transplantation with a low risk of cancer contamination and for developing strategies that preserve fertility for women facing a cancer diagnosis.

Use of innovative biomimetic scaffold in the treatment for large osteochondral lesions of the knee

PURPOSE

Large osteochondral defects involve two different tissues characterized by different intrinsic healing capacity. Different techniques have been proposed to treat these lesions with results still under discussion. The aim of the study is to evaluate the clinical outcome of 19 patients treated with a type I collagen-hydroxyapatite nanostructural biomimetic osteochondral scaffold at minimum follow-up of 2 years.

METHODS

Twenty lesions, 19 patients were treated with this scaffold implantation. The lesions size went from 4 to 8 cm(2) (mean size 5.2 ± 1.6 cm(2)). All patients were clinically evaluated using the International Repair Cartilage Society score, the Tegner Score and EQ-VAS. MRI was performed at 12 and 24 months after surgery and then every 12 months and evaluated with magnetic resonance observation of cartilage repair tissue scoring scale.

RESULTS

The IKDC subjective score improved from a mean score of 35.7 ± 6.3 at the baseline evaluation to 67.7 ± 13.4 at 12-month follow-up (p < 0.0005). A further improvement was documented from 12 to 24 months (mean score of 72.9 ± 12.4 at 24 months) (p < 0.0005). The IKDC objective score confirmed the results. The Tegner activity score improvement was statistically significant (p < 0.0005). The EQ-VAS showed a significant improvement from 3.15 ± 1.09 to 7.35 ± 1.14 (p < 0.0005) at 2-year follow-up. The lesion' site seems to influence the results showing a better outcome in the patients affected in the medial femoral condyle.

CONCLUSIONS

The use of the MaioRegen scaffold is a good procedure for the treatment for large osteochondral defects where other classic techniques are difficult to apply. It is an open one-step surgery with promising stable results at medium follow-up.

LEVEL OF EVIDENCE

IV.

Collagen scaffold for cartilage tissue engineering: the benefit of fibrin glue and the proper culture time in an infant cartilage model

This study (i) developed a scaffold made of collagen I designed for hosting the autologous chondrocytes, (ii) focused on the optimization of chondrocytes seeding by the addition of the fibrin glue, and (iii) investigated the culture time for the ideal scaffold maturation in vitro. In the first part of the study, fresh chondrocytes were isolated from infant swine articular cartilage, and immediately seeded onto the collagen sponges either in medium or in fibrinogen in order to show the contribute of fibrin glue in cell seeding and survival into the scaffold. In the second part of the study, chondrocytes were first expanded in vitro and then resuspended in fibrinogen, seeded in collagen sponges, and cultured for 1, 3, and 5 weeks in order to identify the optimal time for the rescue of cell phenotype and for the scaffold maturation into a tissue with chondral properties. The histological and immunohistochemical data from the first part of the study (study with primary chondrocytes) demonstrated that the presence of fibrin glue ameliorated cell distribution and survival into the chondral composites. The second part of this work (study with dedifferentiated chondrocytes) showed that the prolongation of the culture to 3 weeks promoted a significant restoration of the cell phenotype, resulting in a composite with proper morphological features, biochemical composition, and mechanical integrity. In conclusion, this study developed a collagenic-fibrin glue scaffold that was able to support chondrocyte survival and synthetic activity in a static culture; in particular, this model was able to turn the engineered samples into a tissue with chondral-like properties when cultured in vitro for at least 3 weeks.

Successful creation of tissue-engineered autologous auricular cartilage in an immunocompetent large animal model

Tissue-engineered cartilage has historically been an attractive alternative treatment option for auricular reconstruction. However, the ability to reliably generate autologous auricular neocartilage in an immunocompetent preclinical model should first be established. The objectives of this study were to demonstrate engineered autologous auricular cartilage in the immunologically aggressive subcutaneous environment of an immunocompetent animal model, and to determine the impact of in vitro culture duration of chondrocyte-seeded constructs on the quality of neocartilage maturation in vivo. Auricular cartilage was harvested from eight adult sheep; chondrocytes were isolated, expanded in vitro, and seeded onto fibrous collagen scaffolds. Constructs were cultured in vitro for 2, 6, and 12 weeks, and then implanted autologously in sheep and in control nude mice for 6 and 12 weeks. Explanted tissue was stained with hematoxylin and eosin, safranin O, toluidine blue, collagen type II, and elastin. DNA and glycosaminoglycans (GAGs) were quantified. The quality of cartilage engineered in sheep decreased with prolonged in vitro culture time. Superior cartilage formation was demonstrated after 2 weeks of in vitro culture; the neocartilage quality improved with increased implantation time. In nude mice, neocartilage resembled native sheep auricular cartilage regardless of the in vitro culture length, with the exception of elastin expression. The DNA quantification was similar in all engineered and native cartilage (p>0.1). All cartilage engineered in sheep had significantly less GAG than native cartilage (p<0.02); significantly more GAG was observed with increased implantation time (p<0.02). In mice, the GAG content was similar to that of native cartilage and became significantly higher with increased in vitro or in vivo durations (p<0.02). Autologous auricular cartilage was successfully engineered in the subcutaneous environment of an ovine model using expanded chondrocytes seeded on a fibrous collagen scaffold after a 2-week in vitro culture period.

Cartilage constructs engineered from chondrocytes overexpressing IGF-I improve the repair of osteochondral defects in a rabbit model

Tissue engineering combined with gene therapy is a promising approach for promoting articular cartilage repair. Here, we tested the hypothesis that engineered cartilage with chondrocytes overexpressing a human insulin-like growth factor I (IGF-I) gene can enhance the repair of osteochondral defects, in a manner dependent on the duration of cultivation. Genetically modified chondrocytes were cultured on biodegradable polyglycolic acid scaffolds in dynamic flow rotating bioreactors for either 10 or 28 d. The resulting cartilaginous constructs were implanted into osteochondral defects in rabbit knee joints. After 28 weeks of in vivo implantation, immunoreactivity to ß-gal was detectable in the repair tissue of defects that received lacZ constructs. Engineered cartilaginous constructs based on IGF-I-overexpressing chondrocytes markedly improved osteochondral repair compared with control (lacZ) constructs. Moreover, IGF-I constructs cultivated for 28 d in vitro significantly promoted osteochondral repair vis-à-vis similar constructs cultivated for 10 d, leading to significantly decreased osteoarthritic changes in the cartilage adjacent to the defects. Hence, the combination of spatially defined overexpression of human IGF-I within a tissue-engineered construct and prolonged bioreactor cultivation resulted in most enhanced articular cartilage repair and reduction of osteoarthritic changes in the cartilage adjacent to the defect. Such genetically enhanced tissue engineering provides a versatile tool to evaluate potential therapeutic genes in vivo and to improve our comprehension of the development of the repair tissue within articular cartilage defects. Insights gained with additional exploration using this model may lead to more effective treatment options for acute cartilage defects.

Effect of silver nanocoatings on catheters for haemodialysis in terms of cell viability, proliferation, morphology and antibacterial activity

The onset of infections associated to bacterial proliferation and biofilm formation on indwelling medical devices represents the major risk of morbidity and mortality among patients. In order to contain the risk of infections in clinical practice, there is a growing interest nowadays in silver-based products due to the strong antimicrobial efficacy of silver against a broad spectrum of microorganisms. In this work, temporary catheters for haemodialysis were coated with silver nano-particles through the in situ photo-reduction of a silver salt in alcoholic solution. A homogeneous distribution of silver particles firmly bonded to the substrate was obtained through the adopted technique. An optimisation study was required to define the amount of silver, in order to obtain good efficacy against Gram-positive and Gram-negative bacteria and no cytotoxic effect. At this purpose, three concentrations of silver, 0.1, 0.25 and 0.5 wt%, have been deposited and tested with respect to bacterial reduction percentage and cellular response. Particularly, bacterial enumeration on Escherichia coli and Staphylococcus aureus, and BrdU incorporation, TUNEL assay and Actin staining on a selected primary cell population were performed on catheters treated with the different silver solutions. The silver percentages tested demonstrated strong antibacterial properties together with a good cellular response, thus indicating that the developed product could be proposed in clinical practice and that the lower percentage tested can be preferred with evident advantages in terms of costs.

The application of plastic compression to modulate fibrin hydrogel mechanical properties

The inherent biocompatibility of fibrin hydrogels makes them an attractive material for use in a wide range of tissue engineering applications. Despite this, their relatively low stiffness and high compliance limits their potential for certain orthopaedic applications. Enhanced mechanical properties are desirable so as to withstand surgical handling and in vivo loading after implantation and additionally, can provide important cues to cells seeded within the hydrogel. Standard methods used to enhance the mechanical properties of biological scaffolds such as chemical or thermal crosslinking cannot be used with fibrin hydrogels as cell seeding and gel formation occurs simultaneously. The objective of this study was to investigate the use of plastic compression as a means to improve the mechanical properties of chondrocyte-seeded fibrin hydrogels and to determine the influence of such compression on cell viability within these constructs. It was found that the application of 80% strain to fibrin hydrogels for 30 min (which resulted in a permanent strain of 47.4%) produced a 2.1-fold increase in the subsequent compressive modulus. Additionally, chondrocyte viability was maintained in the plastically compressed gels with significant cellular proliferation and extracellular matrix accumulation observed over 28 days of culture. In conclusion, plastic compression can be used to modulate the density and mechanical properties of cell-seeded fibrin hydrogels and represents a useful tool for both in theatre and in vitro tissue engineering applications.