A Human Amnion-Derived Extracellular Matrix-Coated Cell-Free Scaffold for Cartilage Repair: In Vitro and In Vivo Studies

Advances, challenges, and future directions in the clinical translation of ECM biomaterials for regenerative medicine applications

Extracellular Matrix (ECM) scaffolds and biomaterials have been widely used for decades across a variety of diverse clinical applications and have been implanted in millions of patients worldwide. ECM-based biomaterials have been especially successful in soft tissue repair applications but their utility in other clinical applications such as for regeneration of bone or neural tissue is less well understood. The beneficial healing outcome with the use of ECM biomaterials is the result of their biocompatibility, their biophysical properties and their ability to modify cell behavior after injury. As a consequence of successful clinical outcomes, there has been motivation for the development of next-generation formulations of ECM materials ranging from hydrogels, bioinks, powders, to whole organ or tissue scaffolds. The continued development of novel ECM formulations as well as active research interest in these materials ensures a wealth of possibilities for future clinical translation and innovation in regenerative medicine. The clinical translation of next generation formulations ECM scaffolds faces predictable challenges such as manufacturing, manageable regulatory pathways, surgical implantation, and the cost required to address these challenges. The current status of ECM-based biomaterials, including clinical translation, novel formulations and therapies currently under development, and the challenges that limit clinical translation of ECM biomaterials are reviewed herein.

Chitosan nanocomposite for tissue engineering and regenerative medicine: A review

Regenerative medicine and tissue engineering have emerged as a multidisciplinary promising field in the quest to address the limitations of traditional medical approaches. One of the key aspects of these fields is the development of such types of biomaterials that can mimic the extracellular matrix and provide a conducive environment for tissue regeneration. In this regard, chitosan has played a vital role which is a naturally derived linear bi-poly-aminosaccharide, and has gained significant attention due to its biocompatibility and unique properties. Chitosan possesses many unique physicochemical properties, making it a significant polysaccharide for different applications such as agriculture, nutraceutical, biomedical, food, nutraceutical, packaging, etc. as well as significant material for developing next-generation hydrogel and bio-scaffolds for regenerative medicinal applications. Moreover, chitosan can be easily modified to incorporate desirable properties, such as improved mechanical strength, enhanced biodegradability, and controlled release of bioactive molecules. Blending chitosan with other polymers or incorporating nanoparticles into its matrix further expands its potential in tissue engineering applications. This review summarizes the most recent studies of the last 10 years based on chitosan, blends, and nanocomposites and their application in bone tissue engineering, hard tissue engineering, dental implants, dental tissue engineering, dental fillers, and cartilage tissue engineering.

Acceleration of burn wound healing by micronized amniotic membrane seeded with umbilical cord-derived mesenchymal stem cells

Umbilical cord-derived mesenchymal stem cells (UC-MSC) are promising candidates for wound healing. However, the low amplification efficiency of MSC in vitro and their low survival rates after transplantation have limited their medical application. In this study, we fabricated a micronized amniotic membrane (mAM) as a microcarrier to amplify MSC in vitro and used mAM and MSC (mAM-MSC) complexes to repair burn wounds. Results showed that MSC could live and proliferate on mAM in a 3D culture system, exhibiting higher cell activity than in 2D culture. Transcriptome sequencing of MSC showed that the expression of growth factor-related, angiogenesis-related, and wound healing-related genes was significantly upregulated in mAM-MSC compared to traditional 2D-cultured MSC, which was verified via RT-qPCR. Gene ontology (GO) analysis of differentially expressed genes (DEGs) showed significant enrichment of terms related to cell proliferation, angiogenesis, cytokine activity, and wound healing in mAM-MSC. In a burn wound model of C57BL/6J mice, topical application of mAM-MSC significantly accelerated wound healing compared to MSC injection alone and was accompanied by longer survival of MSC and greater neovascularization in the wound.

A comprehensive review on methods for promotion of mechanical features and biodegradation rate in amniotic membrane scaffolds

Amniotic membrane (AM) is a biological tissue that surrounds the fetus in the mother's womb. It has pluripotent cells, immune modulators, collagen, cytokines with anti-fibrotic and anti-inflammatory effect, matrix proteins, and growth factors. In spite of the biological characteristics, some results have been released in preventing the adhesion on traumatized surfaces. Application of the AM as a scaffold is limited due to its low biomechanical resistance and rapid biodegradation. Therefore, for using the AM during surgery, its modification by different methods such as cross-linking of the membrane collagen is necessary, because the cross-linking is an effective way to reduce the rate of biodegradation of the biological materials. In addition, their cross-linking is likely an efficient way to increase the tensile properties of the material, so that they can be easily handled or sutured. In this regard, various methods related to cross-linking of the AM subsuming the composite materials, physical cross-linking, and chemical cross-linking with the glutraldehyde, carbodiimide, genipin, aluminum sulfate, etc. are reviewed along with its advantages and disadvantages in the current work.

Effects of Platelet Rich Plasma and Amniotic Cell Culture Medium on Wound Healing Following Experimental Animal Tracheal Injury Model: A Comparative Study

INTRODUCTION

Prolonged inflammation after tracheal injury invariably results in a degree of stenosis. The topical application of platelet-rich plasma (PRP) and human amniotic fluid-derived cell culture medium (ACCM) have been shown to promote wound healing. The effects of PRP and amniotic cell culture medium (Gibco AmnioMAX - II ) were investigated in a rat model through morphometric, histological, and biochemical parameters.

MATERIAL METHODS

Thirty-two male Sprague Dawley rats were included in the study: 4 rats provided for the preparation of PRP. Three groups of 7 rats were divided into PRP and ACCM groups, a control and a sham group respectively. A transverse incision on the ventral aspect of the third trachea spanning half of the tracheal circumference was performed. The incision was repaired with 7/0 polypropylene in the sham group. In the control group, 0.5 ml saline solution was applied on to the repaired injury site. In the other two groups, 0.5 mL PRP or ACCM were applied topically on the tracheal repair. Tissue samples were harvested 30 days after surgery for morphometric measurements and biochemical analyses for oxidative stress markers, IL-1beta, IL-6, and VEGF. Connective tissue thickness was evaluated histologically. Statistical analysis included the Mann-Whitney U and Kruskal Wallis tests.

RESULTS

A notable difference was detected (P = 0,025) in cartilage segment length measurements of the trachea between the ACCM group and the sham and control groups (P < 0.03). A significant difference was found in the analysis of TAS, TOS, and OSI values between the study groups and the control and sham groups (P < 0.005). There were also differences in IL1-beta and IL-6 levels between ACCM and PRP groups (P < 0.05). For the same parameters, the differences were significant between the PRP and, sham and control groups (P = 0,004 and P = 0,002 respectively), and between the ACCM and, sham and control groups (P = 0,003 and P = 0,002 respectively).VEGF values demonstrated a significant difference between the PRP and sham group (P = 0,002), and between ACCM and sham/control groups (p=0,002 for both), the highest VEGF value was in ACCM group while the lowest value was in the sham group. In the histological assessment of connective tissue, a significant difference was observed between ACCM and the other groups.

CONCLUSION

Amniotic fluid-derived cell culture medium shows less oxidative stress status than the other applications. ACCM is more effective on inflammatory and angiogenetic processes. Connective tissue thickness results were consistent with those biochemical and morphologic results. Additionally, a significant difference was observed in histological data between ACCM and PRP. Overall, ACCM proved to be efficient on tracheal healing. These effects can be attributed to the abundance of growth factors in both PRP and amniotic fluid-derived cell culture medium (ACCM).

Osteochondral Tissue Engineering: The Potential of Electrospinning and Additive Manufacturing

The socioeconomic impact of osteochondral (OC) damage has been increasing steadily over time in the global population, and the promise of tissue engineering in generating biomimetic tissues replicating the physiological OC environment and architecture has been falling short of its projected potential. The most recent advances in OC tissue engineering are summarised in this work, with a focus on electrospun and 3D printed biomaterials combined with stem cells and biochemical stimuli, to identify what is causing this pitfall between the bench and the patients' bedside. Even though significant progress has been achieved in electrospinning, 3D-(bio)printing, and induced pluripotent stem cell (iPSC) technologies, it is still challenging to artificially emulate the OC interface and achieve complete regeneration of bone and cartilage tissues. Their intricate architecture and the need for tight spatiotemporal control of cellular and biochemical cues hinder the attainment of long-term functional integration of tissue-engineered constructs. Moreover, this complexity and the high variability in experimental conditions used in different studies undermine the scalability and reproducibility of prospective regenerative medicine solutions. It is clear that further development of standardised, integrative, and economically viable methods regarding scaffold production, cell selection, and additional biochemical and biomechanical stimulation is likely to be the key to accelerate the clinical translation and fill the gap in OC treatment.

Applications of Human Amniotic Membrane for Tissue Engineering

An important component of tissue engineering (TE) is the supporting matrix upon which cells and tissues grow, also known as the scaffold. Scaffolds must easily integrate with host tissue and provide an excellent environment for cell growth and differentiation. Human amniotic membrane (hAM) is considered as a surgical waste without ethical issue, so it is a highly abundant, cost-effective, and readily available biomaterial. It has biocompatibility, low immunogenicity, adequate mechanical properties (permeability, stability, elasticity, flexibility, resorbability), and good cell adhesion. It exerts anti-inflammatory, antifibrotic, and antimutagenic properties and pain-relieving effects. It is also a source of growth factors, cytokines, and hAM cells with stem cell properties. This important source for scaffolding material has been widely studied and used in various areas of tissue repair: corneal repair, chronic wound treatment, genital reconstruction, tendon repair, microvascular reconstruction, nerve repair, and intraoral reconstruction. Depending on the targeted application, hAM has been used as a simple scaffold or seeded with various types of cells that are able to grow and differentiate. Thus, this natural biomaterial offers a wide range of applications in TE applications. Here, we review hAM properties as a biocompatible and degradable scaffold. Its use strategies (i.e., alone or combined with cells, cell seeding) and its degradation rate are also presented.

Research Progress on Stem Cell Therapies for Articular Cartilage Regeneration

Injury of articular cartilage can cause osteoarthritis and seriously affect the physical and mental health of patients. Unfortunately, current surgical treatment techniques that are commonly used in the clinic cannot regenerate articular cartilage. Regenerative medicine involving stem cells has entered a new stage and is considered the most promising way to regenerate articular cartilage. In terms of theories on the mechanism, it was thought that stem cell-mediated articular cartilage regeneration was achieved through the directional differentiation of stem cells into chondrocytes. However, recent evidence has shown that the stem cell secretome plays an important role in biological processes such as the immune response, inflammation regulation, and drug delivery. At the same time, the stem cell secretome can effectively mediate the process of tissue regeneration. This new theory has attributed the therapeutic effect of stem cells to their paracrine effects. The application of stem cells is not limited to exogenous stem cell transplantation. Endogenous stem cell homing and in situ regeneration strategies have received extensive attention. The application of stem cell derivatives, such as conditioned media, extracellular vesicles, and extracellular matrix, is an extension of stem cell paracrine theory. On the other hand, stem cell pretreatment strategies have also shown promising therapeutic effects. This article will systematically review the latest developments in these areas, summarize challenges in articular cartilage regeneration strategies involving stem cells, and describe prospects for future development.

Sustained delivery of 17β-estradiol by human amniotic extracellular matrix (HAECM) scaffold integrated with PLGA microspheres for endometrium regeneration

The endometrial injury usually results in intrauterine adhesions (IUAs). However, there is no effective treatment to promote the regeneration of the endometrium currently. The decellularized amnion membrane (AM) is a promising material in human tissue repair and regeneration due to its biocompatibility, biodegradability, as well as the preservation of abundant bioactive components. Here, an innovative drug-delivering system based on human amniotic extracellular matrix (HAECM) scaffolds were developed to facilitate endometrium regeneration. The 17β-estradiol (E2) loaded PLGA microspheres (E2-MS) were well dispersed in the scaffolds without altering their high porosity. E2 released from E2-MS-HAECM scaffolds in vitro showed a decreased initial burst release followed with a sustained release for 21 days, which coincided with the female menstrual cycle. Results of cell proliferation suggested E2-MS-HAECM scaffolds had good biocompatibility and provided more biologic guidance of endometrial cell proliferation except for mechanical supports. Additionally, the mRNA expression of growth factors in endometrial cells indicated that HAECM scaffolds could upregulate the expression of EGF and IGF-1 to achieve endometrium regeneration. Therefore, these advantages provide the drug-loaded bioactive scaffolds with new choices for the treatments of IUAs.

Review of Synthetic and Hybrid Scaffolds in Cartilage Tissue Engineering

Cartilage tissue is under extensive investigation in tissue engineering and regenerative medicine studies because of its limited regenerative potential. Currently, many scaffolds are undergoing scientific and clinical research. A key for appropriate scaffolding is the assurance of a temporary cellular environment that allows the cells to function as in native tissue. These scaffolds should meet the relevant requirements, including appropriate architecture and physicochemical and biological properties. This is necessary for proper cell growth, which is associated with the adequate regeneration of cartilage. This paper presents a review of the development of scaffolds from synthetic polymers and hybrid materials employed for the engineering of cartilage tissue and regenerative medicine. Initially, general information on articular cartilage and an overview of the clinical strategies for the treatment of cartilage defects are presented. Then, the requirements for scaffolds in regenerative medicine, materials intended for membranes, and methods for obtaining them are briefly described. We also describe the hybrid materials that combine the advantages of both synthetic and natural polymers, which provide better properties for the scaffold. The last part of the article is focused on scaffolds in cartilage tissue engineering that have been confirmed by undergoing preclinical and clinical tests.

Mineralized Human Amniotic Membrane as a Biomimetic Scaffold for Hard Tissue Engineering Applications

The human amniotic membrane (HAM) has been viewed as a potential regenerative material for a wide variety of injured tissues because of its collagen-rich content. High degradability of HAM limits its wide practical application in bone tissue engineering. In this study, the natural matrix of the decellularized amniotic membrane was developed by the double diffusion method. The results confirmed a reduction of the amniotic membrane's degradability because of the deposition of calcium and phosphate ions during the double diffusion process. Real-time PCR results showed a high expression of osteogenesis-related genes from adipose-derived mesenchymal stem cells (ADMSCs) cultured on the surface of the developed mineralized amniotic membrane (MAM). Further in vivo experiments were conducted using an MAM preseeded with ADMSCs and a critical-size rat calvarial defect model. Histopathological results confirmed that the MAM + cell sample has excellent potential in bone regeneration.

Cell-derived decellularized extracellular matrix scaffolds for articular cartilage repair

Articular cartilage repair remains a great clinical challenge. Tissue engineering approaches based on decellularized extracellular matrix (dECM) scaffolds show promise for facilitating articular cartilage repair. Traditional regenerative approaches currently used in clinical practice, such as microfracture, mosaicplasty, and autologous chondrocyte implantation, can improve cartilage repair and show therapeutic effect to some degree; however, the long-term curative effect is suboptimal. As dECM prepared by proper decellularization procedures is a biodegradable material, which provides space for regeneration tissue growth, possesses low immunogenicity, and retains most of its bioactive molecules that maintain tissue homeostasis and facilitate tissue repair, dECM scaffolds may provide a biomimetic microenvironment promoting cell attachment, proliferation, and chondrogenic differentiation. Currently, cell-derived dECM scaffolds have become a research hotspot in the field of cartilage tissue engineering, as ECM derived from cells cultured in vitro has many advantages compared with native cartilage ECM. This review describes cell types used to secrete ECM, methods of inducing cells to secrete cartilage-like ECM and decellularization methods to prepare cell-derived dECM. The potential mechanism of dECM scaffolds on cartilage repair, methods for improving the mechanical strength of cell-derived dECM scaffolds, and future perspectives on cell-derived dECM scaffolds are also discussed in this review.

Novel pathways of inflammation in human fetal membranes associated with preterm birth and preterm pre-labor rupture of the membranes

Spontaneous preterm birth (PTB) and preterm pre-labor rupture of the membranes (pPROM) are major pregnancy complications. Although PTB and pPROM have common etiologies, they arise from distinct pathophysiologic pathways. Inflammation is a common underlying mechanism in both conditions. Balanced inflammation is required for fetoplacental growth; however, overwhelming inflammation (physiologic at term and pathologic at preterm) can lead to term and preterm parturition. A lack of effective strategies to control inflammation and reduce the risk of PTB and pPROM suggests that there are several modes of the generation of inflammation which may be dependent on the type of uterine tissue. The avascular fetal membrane (amniochorion), which provides structure, support, and protection to the intrauterine cavity, is one of the key contributors of inflammation. Localized membrane inflammation helps tissue remodeling during pregnancy. Two unique mechanisms that generate balanced inflammation are the progressive development of senescence (aging) and cyclic cellular transitions: epithelial to mesenchymal (EMT) and mesenchymal to epithelial (MET). The intrauterine build-up of oxidative stress at term or in response to risk factors (preterm) can accelerate senescence and promote a terminal state of EMT, resulting in the accumulation of inflammation. Inflammation degrades the matrix and destabilizes membrane function. Inflammatory mediators from damaged membranes are propagated via extracellular vesicles (EV) to maternal uterine tissues and transition quiescent maternal uterine tissues into an active state of labor. Membrane inflammation and its propagation are fetal signals that may promote parturition. This review summarizes the mechanisms of fetal membrane cellular senescence, transitions, and the generation of inflammation that contributes to term and preterm parturitions.

The Healing Effect of Amniotic Membrane in Laryngeal Defects in Rabbit Model

OBJECTIVE

Fibrosis and scar formation following laryngeal repairing is a major concern. This study evaluated the efficacy of applying amniotic membrane (AM) as a biologic dressing to reduce fibrosis and inflammation and promote cartilage repair.

STUDY DESIGN

Experimental animal study.

METHODS

Nine male white Dutch rabbits were selected. A standard defect (5 mm) was created in right and left thyroid lamina. In the right side, two layers of AM were applied while the left side was kept intact for future comparison. Histologic examination with criteria of inflammation, fibrosis, and cartilage regeneration was performed 2, 4, and 6 weeks following AM application. All procedures were done according to animal ethics rules.

RESULTS

Histologic and gross examination showed that AM application was able to reduce inflammation and fibrosis and improve cartilage regeneration significantly.

CONCLUSION

As a useful intervention, AM application can reduce inflammation and fibrosis and enhance cartilage regeneration, following laryngeal defect repair.

LEVEL OF EVIDENCE

NA Laryngoscope, 131:E527-E533, 2021.

Amniotic Product Treatments: Clinical and Basic Science Evidence

PURPOSE OF REVIEW

Orthobiologics, including amniotic products, have been gaining interest in the past decade for the treatment of various orthopedic conditions including osteoarthritis. However, the use of biologics is varied and is currently available with minimal oversight or regulation. This review will assess the current state of research that utilizes amniotic products both in vitro and in vivo.

RECENT FINDINGS

Amniotic tissue derivatives have been shown to have positive effects in animal models for a variety of conditions. Clinical trials are limited with mixed outcomes, yet some recent studies suggest the rationale for continued investigation. While amniotic products appear promising in numerous animal studies, human clinical trials are still lacking. Future studies are needed to assess whether amniotic products have a role in the treatment of osteoarthritis and other orthopedic pathologies.

Hybrid and Composite Scaffolds Based on Extracellular Matrices for Cartilage Tissue Engineering

IMPACT STATEMENT

Scaffolds fabricated from extracellular matrix (ECM) derivatives are composed of conducive structures for cell attachment, proliferation, and differentiation, but generally do not have proper mechanical properties and load-bearing capacity. In contrast, scaffolds based on synthetic biomaterials demonstrate appropriate mechanical strength, but the absence of desirable biological properties is one of their main disadvantages. To integrate mechanical strength and biological cues, these ECM derivatives can be conjugated with synthetic biomaterials. Hence, hybrid scaffolds comprising both advantages of synthetic polymers and ECM derivatives can be considered a robust vehicle for tissue engineering applications.

Establishment of 3-dimensional scaffolds from hemochorial placentas

INTRODUCTION

The extracellular matrix (ECM) is a complex, tissue-specific 3-dimensional network that controls cell processes. ECMs derived from various organs are used to produce biological scaffolds comparable to the native microenvironment. Although placentas are often overlooked, they offer a rich ECM for tissue engineering, especially the hemochorial placentas from rodents and lagomorphs that resemble the ones from humans.

METHODS

Here we established a protocol for decellularization and investigated the ECM in native and decellularized placentas of guinea pigs, rats and rabbits by means of histology, immunohistochemistry, immunofluorescence and scanning electron microscopy.

RESULTS

Effective decellularization were achieved by immersion in 0.25% Sodium Dodecyl Sulfate for 3 days, resulting in an intact ECM, while cells or nuclei were absent. All species had a high diversity of ECM components that varied between areas.

DISCUSSION

Dense fibrous networks in the junctional zone were strongly positive to collagen I, III and IV, fibronectin, and laminin ECM markers. Noticeable response were also found for the decidua, especially along the maternal vessels. The labyrinth had thin fibers strongly positive for fibronectin and laminin, but not much for collagens. In conclusion, we established an effective protocol to obtain biological scaffolds from animal models with hemochorial placentas that possessed promising values for future purposes in Regenerative Medicine.

Homing of adipose stem cells on the human amniotic membrane as a scaffold: A histological study

BACKGROUND

The human amniotic membrane (HAM) is a suitable and effective scaffold for cell culture and delivery, and adipose-derived stem cells (ADSCs) are an important source of stem cells for transplantation and chondrogenic differentiation.

OBJECTIVE

To assess the practicability of a cryopreserved HAM as a scaffold in cell proliferation and differentiation in vitro.

MATERIALS AND METHODS

In this experimental study, adipose tissue samples were harvested from the inguinal region of male patients aged 15-30 years. Flow cytometry was used to identify CD31, CD45, CD90, and CD105 markers in adipose stem cells. HAM was harvested from donor placenta after cesarean section, washed, trypsin-based decellularized trypsinized decellularized, and used as a scaffold via three methods: 1) ADSCs were differentiated into chondrocytes on cell culture flasks (monolayer method), and after 14 days of culture, the cells were transferred and cultured on both sides of the HAM; 2) ADSCs were cultured and differentiated directly on both sides of the HAM for 14 days (scaffold-mediated differentiation); and 3) chondrocytes were differentiated with micromass culture for 14 days, transferred on HAM, and tissue slides were histologically analyzed qualitatively.

RESULTS

Flow cytometry confirmed the presence of mesenchymal stem cells. Histological findings revealed that the cells adhered and grew well on the stromal layer of HAM. Among the three methods, scaffold-mediated differentiation of ADSCs showed the best results.

CONCLUSION

ADSCs have excellent attachment, viability, and differentiation capacity in the stromal side of HAM. Additionally, the direct culture and differentiation of ADSCs on HAM is more suitable than the culture of differentiated cells on HAM.

Human Amniotic Membrane: A Versatile Scaffold for Tissue Engineering

The human amniotic membrane (hAM) is a collagen-based extracellular matrix derived from the human placenta. It is a readily available, inexpensive, and naturally biocompatible material. Over the past decade, the development of tissue engineering and regenerative medicine, along with new decellularization protocols, has recast this simple biomaterial as a tunable matrix for cellularized tissue engineered constructs. Thanks to its biocompatibility, decellularized hAM is now commonly used in a broad range of medical fields. New preparation techniques and composite scaffold strategies have also emerged as ways to tune the properties of this scaffold. The current state of understanding about the hAM as a biomaterial is summarized in this review. We examine the processing techniques available for the hAM, addressing their effect on the mechanical properties, biodegradation, and cellular response of processed scaffolds. The latest in vitro applications, in vivo studies, clinical trials, and commercially available products based on the hAM are reported, organized by medical field. We also look at the possible alterations to the hAM to tune its properties, either through composite materials incorporating decellularized hAM, chemical cross-linking, or innovative layering and tissue preparation strategies. Overall, this review compiles the current literature about the myriad capabilities of the human amniotic membrane, providing a much-needed update on this biomaterial.

Current perspectives on biological approaches for osteoarthritis

Musculoskeletal injuries that disrupt the structure and function of diarthrodial joints can cause permanent biomechanical alterations and lead to a more severe, chronic condition. Despite advancements that have been made to restore tissue function and delay the need for joint replacement, there are currently no disease-modifying therapies for osteoarthritis (OA). To reduce the risk of OA, innovative preventive medicine approaches have been developed over the last decade to treat the underlying pathology. Several biological approaches are promising treatment modalities for various stages of OA owing to their minimally invasive nature and actively dynamic physiological mechanisms that attenuate tissue degradation and inflammatory responses. Individualized growth factor and cytokine therapies, tissue-engineered biomaterials, and cell-based therapies have revolutionary potential for orthopedic applications; however, the paucity of standardization and categorization of biological components and their counterparts has made it difficult to determine their clinical and biological efficacy. Cell-based therapies and tissue-engineered biologics have become lucrative in sports medicine and orthopedics; nonetheless, there is a continued effort to produce a biological treatment modality tailored to target intra-articular structures that recapitulates tissue function. Advanced development of these biological treatment modalities will potentially optimize tissue healing, regeneration, and joint preservation strategies. Therefore, the purpose of this paper is to review current concepts on several biological treatment approaches for OA.

The Placenta: Applications in Orthopaedic Sports Medicine

BACKGROUND

Placenta has a long history of use for treating burns and wounds. It is a rich source of collagen and other extracellular matrix proteins, tissue reparative growth factors, and stem cells, including mesenchymal stem cells (MSCs). Recent data show its therapeutic potential for orthopaedic sports medicine indications.

PURPOSE

To provide orthopaedic surgeons with an anatomic description of the placenta, to characterize its cellular composition, and to review the literature reporting the use of placenta-derived cells and placental tissue allografts for orthopaedic sports medicine indications in animal models and in humans.

STUDY DESIGN

Systematic review.

METHODS

Using a total of 63 keyword combinations, the PubMed and MEDLINE databases were searched for published articles describing the use of placental cells and/or tissue for orthopaedic sports medicine indications. Information was collected on placental tissue type, indications, animal model, study design, treatment regimen, safety, and efficacy outcomes. Results were categorized by indication and subcategorized by animal model.

RESULTS

Outcomes for 29 animal studies and 6 human studies reporting the use of placenta-derived therapeutics were generally positive; however, the placental tissue source, clinical indication, and administration route were highly variable across these studies. Fourteen animal studies described the use of placental tissue for tendon injuries, 13 studies for osteoarthritis or articular cartilage injuries, 3 for ligament injuries, and 1 for synovitis. Both placenta-derived culture-expanded cells (epithelial cells or MSCs) and placental tissue allografts were used in animal studies. In all human studies, commercial placental allografts were used. Five of 6 human studies examined the treatment of foot and ankle pathological conditions, and 1 studied the treatment of knee osteoarthritis.

CONCLUSION

A review of the small number of reported studies revealed a high degree of variability in placental cell types, placental tissue preparation, routes of administration, and treatment regimens, which prohibits making any definitive conclusions. Currently, the clinical use of placenta is limited to only commercial placental tissue allografts, as there are no placenta-derived biological drugs approved for the treatment of orthopaedic sports medicine conditions in the United States. However, this review shows that the application of placental cells or tissue allografts appears to be safe and has potential to improve outcomes for orthopaedic sports medicine indications.

Tissue Engineering Strategies for Osteochondral Repair

Tissue engineering strategies have been pushing forward several fields in the range of biomedical research. The musculoskeletal field is not an exception. In fact, tissue engineering has been a great asset in the development of new treatments for osteochondral lesions. Herein, we overview the recent developments in osteochondral tissue engineering. Currently, the treatments applied in a clinical scenario have shown some drawbacks given the difficulty in regenerating a fully functional hyaline cartilage. Among the different strategies designed for osteochondral regeneration, it is possible to identify cell-free strategies, scaffold-free strategies, and advanced strategies, where different materials are combined with cells. Cell-free strategies consist in the development of scaffolds in the attempt to better fulfill the requirements of the cartilage regeneration process. For that, different structures have been designed, from monolayers to multilayered structures, with the intent to mimic the osteochondral architecture. In the case of scaffold-free strategies, they took advantage on the extracellular matrix produced by cells. The last strategy relies in the development of new biomaterials capable of mimicking the extracellular matrix. This way, the cell growth, proliferation, and differentiation at the lesion site are expedited, exploiting the self-regenerative potential of cells and its interaction with biomolecules. Overall, despite the difficulties associated with each approach, tissue engineering has been proven a valuable tool in the regeneration of osteochondral lesions and together with the latest advances in the field, promises to revolutionize personalized therapies.

Recent strategies in cartilage repair: A systemic review of the scaffold development and tissue engineering

Osteoarthritis results in irreparable loss of articular cartilage. Due to its avascular nature and low mitotic activity, cartilage has little intrinsic capacity for repair. Cartilage loss leads to pain, physical disability, movement restriction, and morbidity. Various treatment strategies have been proposed for cartilage regeneration, but the optimum treatment is yet to be defined. Tissue engineering with engineered constructs aimed towards developing a suitable substrate may help in cartilage regeneration by providing the mechanical, biological and chemical support to the cells. The use of scaffold as a substrate to support the progenitor cells or autologous chondrocytes has given promising results. Leakage of cells, poor cell survival, poor cell differentiation, inadequate integration into the host tissue, incorrect distribution of cells, and dedifferentiation of the normal cartilage are the common problems in tissue engineering. Current research is focused on improving mechanical and biochemical properties of scaffold to make it more efficient. The aim of this review is to provide a critical discussion on existing challenges, scaffold type and properties, and an update on ongoing recent developments in the architecture and composition of scaffold to enhance the proliferation and viability of mesenchymal stem cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2343-2354, 2017.

[In vitrodifferentiation of human amniotic mesenchymal stem cells into ligament fibroblasts after induced by transforming growth factor β 1 and vascular endothelial growth factor]

Objective

To investigate whether human amniotic mesenchymal stem cells (hAMSCs) have the characteristics of mesenchymal stem cells (MSCs) and the differentiation capacity into ligament fibroblasts in vitro.

Methods

The hAMSCs were separated through trypsin and collagenase digestion from placenta, the phenotypic characteristics of hAMSCs were detected by flow cytometry, the cytokeratin-19 (CK-19) and vimentin expression of hAMSCs were tested through immunofluorescence staining. The hAMSCs at the 3rd passage were cultured with L-DMEM/F12 medium containing transforming growth factor β ₁ (TGF-β ₁) and vascular endothelial growth factor (VEGF) as the experimental group and with single L-DMEM/F12 medium as the control group. The morphology of hAMSCs was observed by inverted phase contrast microscope; the cellular activities and ability of proliferation were examined by cell counting kit-8 (CCK-8) method; the ligament fibroblasts related protein expressions including collagen type I, collagen type III, Fibronectin, and Tenascin-C were detected by immunofluorescence staining; specific mRNA expressions of ligament fibroblasts and angiogenesis including collagen type I, collagen type III, Fibronectin, α-smooth muscle actin (α-SMA), and VEGF were measured by real-time fluorescence quantitative PCR.

Results

The hAMSCs presented monolayer and adherent growth under inverted phase contrast microscope; the flow cytometry results demonstrated that hAMSCs expressed the MSCs phenotypes; the immunofluorescence staining results indicated the hAMSCs had high expression of the vimentin and low expression of CK-19; the hAMSCs possessed the differentiation ability into the osteoblasts, chondroblasts, and lipoblasts. The CCK-8 results displayed that cells reached the peak of growth curve at 7 days in each group, and the proliferation ability in the experimental group was significantly higher than that in the control group at 7 days ( P<0.05). The immunofluorescence staining results showed that the expressions of collagen type I, collagen type III, Fibronectin, and Tenascin-C in the experimental group were significantly higher than those in the control group at 5, 10, and15 days after culture ( P<0.05). The real-time fluorescence quantitative PCR results revealed that the mRNA relative expressions had an increasing tendency at varying degrees with time in the experimental group ( P<0.05). The relative mRNA expressions of collagen type I, collagen type III, Fibronectin, α-SMA, and VEGF in the experimental group were significantly higher than those in the control group at the other time points ( P<0.05), but no significant difference was found in the relative mRNA expressions of collagen type I, collagen type III, and VEGF between 2 groups at 5 days ( P>0.05).

Conclusion

The hAMSCs possesses the characteristics of MSCs and good proliferation ability which could be chosen as seed cell source in tissue engineering. The expressions of ligament fibroblasts and angiogenesis related genes could be up-regulated, after induction in vitro, and the synthesis of ligament fibroblasts related proteins could be strengthened. In addition, the application of TGF-β ₁ and VEGF could be used as growth factors sources in constructing tissue engineered ligament.

Fetal Membranes-Derived Stem Cells Microenvironment

Recently, the regenerative medicine has been trying to congregate different areas such as tissue engineering and cellular therapy, in order to offer effective treatments to overcome several human and veterinary medical problems. In this regard, fetal membranes have been proposed as a powerful source for obtainment of multipotent stem cells with low immunogenicity, anti-inflammatory properties and nontumorigenicity properties for the treatment of several diseases, including replacing cells lost due to tissue injuries or degenerative diseases. Morpho-physiological data have shown that fetal membranes, especially the yolk sac and amnion play different functions according to the gestational period, which are direct related to the features of the microenvironment that their cells are subject. The characteristics of the microenvironment affect or controls important cellular events involved with proliferation, division and maintenance of the undifferentiated stage or differentiation, especially acting on the extracellular matrix components. Considering the importance of the microenvironment and the diversity of embryonic and fetal membrane-derived stem cells, this chapter will addressed advances in the isolation, phenotyping, characteristics of the microenvironment, and applications of yolk sac and amniotic membrane-derived stem cells for human and veterinary regenerative medicine.