Phosphate Functional Groups Improve Oligo[(Polyethylene Glycol) Fumarate] Osteoconduction and BMP-2 Osteoinductive Efficacy

Hydrogel-Based Growth Factor Delivery Platforms: Strategies and Recent Advances

Growth factors play a crucial role in regulating a broad variety of biological processes and are regarded as powerful therapeutic agents in tissue engineering and regenerative medicine in the past decades. However, their application is limited by their short half-lives and potential side effects in physiological environments. Hydrogels are identified as having the promising potential to prolong the half-lives of growth factors and mitigate their adverse effects by restricting them within the matrix to reduce their rapid proteolysis, burst release, and unwanted diffusion. This review discusses recent progress in the development of growth factor-containing hydrogels for various biomedical applications, including wound healing, brain tissue repair, cartilage and bone regeneration, and spinal cord injury repair. In addition, the review introduces strategies for optimizing growth factor release including affinity-based delivery, carrier-assisted delivery, stimuli-responsive delivery, spatial structure-based delivery, and cellular system-based delivery. Finally, the review presents current limitations and future research directions for growth factor-delivering hydrogels.

3D porous bioceramic based boron-doped hydroxyapatite/baghdadite composite scaffolds for bone tissue engineering

Making composite scaffolds is one of the well-known methods to improve the properties of scaffolds used in bone tissue engineering. In this study, novel ceramic-based 3D porous composite scaffolds were successfully prepared using boron-doped hydroxyapatite, as the primary component, and baghdadite, as the secondary component. The effects of making composites on the properties of boron-doped hydroxyapatite-based scaffolds were investigated in terms of physicochemical, mechanical, and biological properties. The incorporation of baghdadite contributed to making more porous scaffolds (over 40%) with larger surface area and micropore volumes. The produced composite scaffolds almost solved the low degradation problem of boron-doped hydroxyapatite through the exhibition of higher biodegradation rates, which matched the degradation rate appropriate for the gradual transfer of loads from implants to newly formed bone tissues. Besides higher bioactivity, enhanced cell proliferation, as well as higher osteogenic differentiation (in scaffolds with baghdadite weight greater than 10%), were observed in composite scaffolds due to both physical and chemical modifications that occurred in composite scaffolds. Although our composite scaffolds were slightly weaker than boron-doped hydroxyapatite, their compressive strengths were higher than almost all composite scaffolds made by baghdadite incorporation in the literature. In fact, boron-doped hydroxyapatite provided a base for baghdadite to show mechanical strength suitable for cancellous bone defect treatments. Eventually, our novel composite scaffolds converged the advantages of both components to satisfy the various requirements needed for bone tissue engineering applications and take us one step forward on the road to fabricating an ideal scaffold.

Design, Synthesis and Actual Applications of the Polymers Containing Acidic P-OH Fragments: Part 2-Sidechain Phosphorus-Containing Polyacids

Macromolecules containing acidic fragments in side-groups—polyacids—occupy a special place among synthetic polymers. Properties and applications of polyacids are directly related to the chemical structure of macromolecules: the nature of the acidic groups, polymer backbone, and spacers between the main chain and acidic groups. The chemical nature of the phosphorus results in the diversity of acidic >P(O)OH fragments in sidechain phosphorus-containing polyacids (PCPAs) that can be derivatives of phosphoric or phosphinic acids. Sidechain PCPAs have many similarities with other polyacids. However, due to the relatively high acidity of −P(O)(OH)2 fragment, bone and mineral affinity, and biocompatibility, sidechain PCPAs have immense potential for diverse applications. Synthetic approaches to sidechain PCPAs also have their own specifics. All these issues are discussed in the present review.

Injectable pH-responsive adhesive hydrogels for bone tissue engineering inspired by the underwater attachment strategy of marine mussels

A major challenge in tissue engineering is the development of alternatives to traditional bone autografts and allografts that can regenerate critical-sized bone defects. Here we present the design of injectable pH-responsive double-crosslinked adhesive hydrogels inspired by the molecular mechanism and environmental post-processing of marine mussel adhesive. Nine adhesive hydrogel formulations were developed through the conjugation of crosslinkable catechol functional groups (DOPA) and the synthetic oligomer oligo[poly(ethylene glycol) fumarate] (OPF), varying the DOPA content (w/w%) and molecular weight (MW) of the OPF backbone to produce formulations with a range of swelling ratios, porosities, and crosslink densities. DOPA incorporation altered the surface chemistry, mechanical properties, and surface topography of hydrogels, resulting in an increase in material stiffness, slower degradation, and enhanced pre-osteoblast cell attachment and proliferation. When injected within simulated bone defects, DOPA-mediated interfacial adhesive interactions also prevented the displacement of scaffolds, an effect that was maintained even after swelling within physiological conditions. Taken together, OPF-DOPA hydrogels represent a promising new material to enhanced tissue integration and the prevention of the post-implantation migration of scaffolds that can occur due to biomechanical loading in vivo.

Advances in 3D printing of composite scaffolds for the repairment of bone tissue associated defects

The conventional methods of using autografts and allografts for repairing defects in bone, the osteochondral bone and the cartilage tissue have many disadvantages, like donor site morbidity and shortage of donors. Moreover, only 30% of the implanted grafts are shown to be successful in treating the defects. Hence, exploring alternative techniques such as tissue engineering to treat bone tissue associated defects is promising as it eliminates the above-mentioned limitations. To enhance the mechanical and biological properties of the tissue engineered product, it is essential to fabricate the scaffold used in tissue engineering by the combination of various biomaterials. Three-dimensional (3D) printing, with its ability to print composite materials and with complex geometry seems to have a huge potential in scaffold fabrication technique for engineering bone associated tissues.This review summarizes the recent applications and future perspectives of 3D printing technologies in the fabrication of composite scaffolds used in bone, osteochondral and cartilage tissue engineering. Key developments in the field of 3D printing technologies involves the incorporation of various biomaterials and cells in printing composite scaffolds mimicking physiologically relevant complex geometry & gradient porosity. Much recently, the emerging trend of printing smart scaffolds which can respond to external stimulus such as temperature, pH and magnetic field, known as 4D printing is gaining immense popularity and can be considered as the future of 3D printing applications in the field of tissue engineering. This article is protected by copyright. All rights reserved.

Black phosphorus incorporation modulates nanocomposite hydrogel properties and subsequent MC3T3 cell attachment, proliferation, and differentiation

A promising strategy that emerged in tissue engineering is to incorporate two-dimensional (2D) materials into polymer scaffolds, producing materials with desirable mechanical properties and surface chemistries, which also display broad biocompatibility. Black phosphorus (BP) is a 2D material that has sparked recent scientific interest due to its unique structure and electrochemical characteristics. In this study, BP nanosheets (BPNSs) were incorporated into a cross-linkable oligo[poly(ethylene glycol) fumarate] (OPF) hydrogel to produce a new nanocomposite for bone regeneration. BPNSs exhibited a controllable degradation rate coupled with the release of phosphate in vitro. MTS assay results together with live/dead images confirmed that the introduction of BPNSs into OPF hydrogels enhanced MC3T3-E1 cell proliferation. Moreover, the morphology parameters indicated better attachments of cells in the BPNSs containing group. Immunofluorescence images as well as intercellular ALP and OCN activities showed that adding a certain amount of BPNSs to OPF hydrogel could greatly improve differentiation of pre-osteoblasts on the hydrogel. Additionally, embedding black phosphorous into a neutral polymer network helped to control its cytotoxicity, with optimal cell growth observed at BP concentrations as high as 500 ppm. These results reinforced that the supplementation of OPF with BPNSs can increase the osteogenic capacity of polymer scaffolds for use in bone tissue engineering.

SDF-1α/OPF/BP Composites Enhance the Migrating and Osteogenic Abilities of Mesenchymal Stem Cells

In situ cell recruitment is a promising regenerative medicine strategy with the purpose of tissue regeneration without stem cell transplantation. This chemotaxis-based strategy is aimed at ensuring a restorative environment through the release of chemokines that promote site-specific migration of healing cell populations. Stromal cell-derived factor-1α (SDF-1α) is a critical chemokine that can regulate the migration of mesenchymal stem cells (MSCs). Accordingly, here, SDF-1α-loaded microporous oligo[poly(ethylene glycol) fumarate]/bis[2-(methacryloyloxy)ethyl] phosphate composites (SDF-1α/OPF/BP) were engineered and probed. SDF-1α/OPF/BP composites were loaded with escalating SDF-1α concentrations, namely, 0 ng/ml, 50 ng/ml, 100 ng/ml, and 200 ng/ml, and were cocultured with MSC. Scratching assay, Transwell assay, and three-dimensional migration model were utilized to assess the migration response of MSCs. Immunofluorescence staining of Runx2 and osteopontin (OPN), ELISA assay of osteocalcin (OCN) and alkaline phosphatase (ALP), and Alizarin Red S staining were conducted to assess the osteogenesis of MSCs. All SDF-1α/OPF/BP composites engendered a release of SDF-1α (>80%) during the first four days. SDF-1α released from the composites significantly promoted migration and osteogenic differentiation of MSCs documented by upregulated expression of osteogenic-related proteins, ALP, Runx2, OCN, and OPN. SDF-1α at 100 ng/ml was optimal for enhanced migration and osteogenic proficiency. Thus, designed SDF-1α/OPF/BP composites were competent in promoting the homing and osteogenesis of MSCs and thus offer a promising bioactive scaffold candidate for on-demand bone tissue regeneration.

2D phosphorene nanosheets, quantum dots, nanoribbons: synthesis and biomedical applications

Phosphorene, also known as black phosphorus (BP), is a two-dimensional (2D) material that has gained significant attention in several areas of current research. Its unique properties such as outstanding surface activity, an adjustable bandgap width, favorable on/off current ratios, infrared-light responsiveness, good biocompatibility, and fast biodegradation differentiate this material from other two-dimensional materials. The application of BP in the biomedical field has been rapidly emerging over the past few years. This article aimed to provide a comprehensive review of the recent progress on the unique properties and extensive medical applications for BP in bone, nerve, skin, kidney, cancer, and biosensing related treatment. The details of applications of BP in these fields were summarized and discussed.

Bifunctional hydrogel for potential vascularized bone tissue regeneration

Most of the synthetic polymer-based hydrogels lack the intrinsic properties needed for tissue engineering applications. Here, we describe a biomimetic approach to induce the mineralization and vascularization of poly(ethylene glycol) (PEG)-based hydrogel to template the osteogenic activities. The strategy involves the covalent functionalization of oligo[poly(ethylene glycol) fumarate] (OPF) with phosphate groups and subsequent treatment of phosphorylated-OPF (Pi-OPF) hydrogels with alkaline phosphatase enzyme (ALP) and calcium. Unlike previously reported studies for ALP induced mineralization, in this study, the base polymer itself was modified with the phosphate groups for uniform mineralization of hydrogels. In addition to improvement of mechanical properties, enhancement of MC3T3-E1 cell attachment and proliferation, and promotion of mesenchymal stem cells (MSC) differentiation were observed as the intrinsic benefits of such mineralization. Current bone tissue engineering (BTE) research endeavors are also extensively focused on vascular tissue regeneration due to its inherent advantages in bone regeneration. Taking this into account, we further functionalized the mineralized hydrogels with FG-4592, small hypoxia mimicking molecule. The functionalized hydrogels elicited upregulated in vitro angiogenic activities of human umbilical vein endothelial cells (HUVEC). In addition, when implanted subcutaneously in rats, enhanced early vascularization activities around the implantation site were observed as demonstrated by the immunohistochemistry results. This further leveraged the formation of calcified tissues at the implantation site at later time points evident through X-ray imaging. The overall results here show the perspectives of bifunctional OPF hydrogels for vascularized BTE.

Effect of inorganic phosphate on migration and osteogenic differentiation of bone marrow mesenchymal stem cells

Background

Phosphate is the major ingredient of bone tissue, and is also an important component of commercial bone substitute materials, bone scaffolds, and implant surface coatings. With the dissolution of the bone substitute materials and the degradation by cells, local ion concentrations will change and affect bone tissue reconstruction. Bone marrow -derived mesenchymal stem cells (BM-MSCs) are main autologous cells to repair injured bone. When bone injure occurs, BM-MSCs migrate to the damaged area, differentiate into osteoblasts, and secrete bioactive factors to promote bone tissue repaired. This study aimed to investigate the effect of inorganic phosphate (Pi) at a series of concentration on migration and osteogenic differentiation of human bone marrow -derived mesenchymal stem cells(hBM-MSCs).

Methods

The culture of hBM-MSCs in mediums with different concentration of Pi from 2 mM to 10 mM were performed. HBM-MSCs migration were examined with transwell assays. HBM-MSCs proliferation were evaluated by cell counting kit-8 colorimetric method. Osteogenic genes expression were analyzed by real-time reverse transcriptase polymerase chain reaction. Mineralized nodules formation were demonstrated by Alizarin red staining.

Result

4–10 mM Pi could effectively promote the migration of hBM-MSCs at 12 h and 18 h. There was no significant difference in the migration number of hBM-MSCs in Pi culture mediums at a concentration of 6, 8, and10mM. 2–10 mM Pi could promote the proliferation of hBM-MSCs to varying degrees in the observation period, while 4–10 mM Pi could promote the osteogenic differentiation and mineralization of hBM-MSCs.

Conclusion

The findings in our study showed 4-10 mM Pi could promote the migration, osteogenic differentiation, and mineralization of hBM-MSCs.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12861-020-00229-x.

Cyclic ethylene phosphates with (CH2)nCOOR and CH2CONMe2 substituents: synthesis and mechanistic insights of diverse reactivity in aryloxy-Mg complex-catalyzed (co)polymerization

Herein we present a comparative study of the reactivity of ethylene phosphates with –O(CH2)nCOOMe (n = 1–3, 5), –CH2COOtBu, –OCHMeCOOMe, and –OCH2CONMe2 substituents in BHT-Mg catalyzed ROP.

Mesenchymal stem cell spheroids incorporated with collagen and black phosphorus promote osteogenesis of biodegradable hydrogels

Mesenchymal stem cell (MSC)-spheroids have sparked significant interest in bone tissue engineering due to their resemblance to natural bone tissue, especially in terms of cell-cell and cell-extracellular matrix interactions. Many biomaterials or biomolecules have been incorporated into MSC-spheroids to enhance their osteogenic abilities. In this respect, we assessed the osteogenic responses of MSC spheroids leveraged through the unique combination of collagen and black phosphorus (BP). The MSC spheroids were successfully constructed with 6 μg/mL collagen and/or a concentration gradient (0 μg/mL, 4 μg/mL, 8 μg/mL, and 16 μg/mL) of BP and were evaluated for MSC viability and their osteogenic differentiation over a time period of 14 days. Improved MSC viability and osteogenic ability were observed for the spheroids with collagen and BP at the concentration of 4 μg/mL and 8 μg/mL. Next, blank spheroids (Control) or the optimized MSC spheroids with 6 μg/mL collagen and 4 μg/mL BP (Col+BP4) were further encapsulated into two types of hydrogel scaffolds: porous oligo[poly(ethylene glycol) fumarate] (OPF) hydrogel and hydroxyapatite-collagen I scaffold (HE-COL). The osteogenic abilities of these four groups were evaluated after 14 and 21 days of osteogenic induction. The MSC spheroids incorporated with collagen and BP implanted into OPF porous hydrogel (Col+BP/OPF) elicited a higher expression of Runx2, osteopontin, and alkaline phosphatase than blank spheroids implanted into OPF porous hydrogel (Control/OPF). Enhanced osteogenesis was also observed in the Col+BP/HE-COL group as compared to Control/HE-COL. Taken together, the results from this study showed the perspectives of collagen and BP incorporated MSC spheroids for the development of injectable cellular therapies for bone regeneration.

BMP and TGFβ use and release in bone regeneration

A fracture that does not unite in nine months is defined as nonunion. Nonunion is common in fragmented fractures and large bone defects where vascularization is impaired. The distal third of the tibia, the scaphoid bone or the talus fractures are furthermore prone to nonunion. Open fractures and spinal fusion cases also need special monitoring for healing. Bone tissue regeneration can be attained by autografts, allografts, xenografts and synthetic materials, however their limited availability and the increased surgical time as well as the donor site morbidity of autograft use, and lower probability of success, increased costs and disease transmission and immunological reaction probability of allografts oblige us to find better solutions and new grafts to overcome the cons. A proper biomaterial for regeneration should be osteoinductive, osteoconductive, biocompatible and mechanically suitable. Cytokine therapy, where growth factors are introduced either exogenously or triggered endogenously, is one of the commonly used method in bone tissue engineering. Transforming growth factor β (TGFβ) superfamily, which can be divided structurally into two groups as bone morphogenetic proteins (BMPs), growth differentiation factors (GDFs) and TGFβ, activin, Nodal branch, Mullerian hormone, are known to be produced by osteoblasts and other bone cells and present already in bone matrix abundantly, to take roles in bone homeostasis. BMP family, as the biggest subfamily of TGFβ superfamily, is also reported to be the most effective growth factors in bone and development, which makes them one of the most popular cytokines used in bone regeneration. Complications depending on the excess use of growth factors, and pleiotropic functions of BMPs are however the main reasons of why they should be approached with care. In this review, the Smad dependent signaling pathways of TGFβ and BMP families and their relations and the applications in preclinical and clinical studies will be briefly summarized.

Biological responses to physicochemical properties of biomaterial surface

Biomedical scientists use chemistry-driven processes found in nature as an inspiration to design biomaterials as promising diagnostic tools, therapeutic solutions, or tissue substitutes. While substantial consideration is devoted to the design and validation of biomaterials, the nature of their interactions with the surrounding biological microenvironment is commonly neglected. This gap of knowledge could be owing to our poor understanding of biochemical signaling pathways, lack of reliable techniques for designing biomaterials with optimal physicochemical properties, and/or poor stability of biomaterial properties after implantation. The success of host responses to biomaterials, known as biocompatibility, depends on chemical principles as the root of both cell signaling pathways in the body and how the biomaterial surface is designed. Most of the current review papers have discussed chemical engineering and biological principles of designing biomaterials as separate topics, which has resulted in neglecting the main role of chemistry in this field. In this review, we discuss biocompatibility in the context of chemistry, what it is and how to assess it, while describing contributions from both biochemical cues and biomaterials as well as the means of harmonizing them. We address both biochemical signal-transduction pathways and engineering principles of designing a biomaterial with an emphasis on its surface physicochemistry. As we aim to show the role of chemistry in the crosstalk between the surface physicochemical properties and body responses, we concisely highlight the main biochemical signal-transduction pathways involved in the biocompatibility complex. Finally, we discuss the progress and challenges associated with the current strategies used for improving the chemical and physical interactions between cells and biomaterial surface.

3D bioprinting of oligo(poly[ethylene glycol] fumarate) for bone and nerve tissue engineering

3D bioprinting is a promising new tissue restoration technique that enables the precise deposition of cells and growth factors in order to more closely mimic the structure and function of native organs. In this study, we report the development of a new bioink using oligo(poly[ethylene glycol] fumarate) (OPF), a photo-crosslinkable, and biodegradable polymer, for 3D bioprinting. In addition to OPF, a small portion of gelatin was also incorporated into the bioink to make it bio-printable. After immersion in the cell medium, gelatin was eluted away to create a bioprinted scaffold of pure OPF. Excellent cell viability, spreading, and long-term proliferation of encapsulated cells was observed using both bone and nerve cells as examples. These results demonstrate that OPF bioink has great potential in future 3D bioprinting applications that aim to replicate complex, layered tissues, and/or organs.

Advancements in Hydrogel-Based Drug Sustained Release Systems for Bone Tissue Engineering

Bone defects caused by injury, disease, or congenital deformity remain a major health concern, and efficiently regenerating bone is a prominent clinical demand worldwide. However, bone regeneration is an intricate process that requires concerted participation of both cells and bioactive factors. Mimicking physiological bone healing procedures, the sustained release of bioactive molecules plays a vital role in creating an optimal osteogenic microenvironment and achieving promising bone repair outcomes. The utilization of biomaterial scaffolds can positively affect the osteogenesis process by integrating cells with bioactive factors in a proper way. A high water content, tunable physio-mechanical properties, and diverse synthetic strategies make hydrogels ideal cell carriers and controlled drug release reservoirs. Herein, we reviewed the current advancements in hydrogel-based drug sustained release systems that have delivered osteogenesis-inducing peptides, nucleic acids, and other bioactive molecules in bone tissue engineering (BTE).

Phosphate functionalization and enzymatic calcium mineralization synergistically enhance oligo[poly(ethylene glycol) fumarate] hydrogel osteoconductivity for bone tissue engineering

A current approach in bone tissue engineering is the implantation of polymeric scaffolds that promote osteoblast attachment and growth as well as biomineralization. One promising polymer is oligo[poly(ethylene glycol) fumarate] (OPF), a polyethylene glycol-based material that is biocompatible, injectable, and biodegradable, but in its native form does not support robust bone cell attachment or growth. To address this issue, this study evaluated the osteoconductivity of bis[02-(methacryloyloxy)ethyl] phosphate (BP) functionalized OPF hydrogels (OPF-BP) using MC3T3-E1 pre-osteoblast cells, both before and after enzymatic mineralization with a calcium solution. The inclusion of negatively charged functional groups allowed for the tailored uptake and release of calcium, while also altering the mechanical properties and surface topography of the hydrogel surface. In cell culture, OPF-BP hydrogels with 20 and 30% (w/w) BP optimized osteoblast attachment, proliferation, and differentiation after a 21-day in vitro period. In addition, the OPF-BP30 treatment, when mineralized with calcium, exhibited a 128% increase in osteocalcin expression when compared with the non-mineralized treatment. These findings suggest that phosphate functionalization and enzymatic calcium mineralization can act synergistically to enhance the osteoconductivity of OPF hydrogels, making this processed material an attractive candidate for bone tissue engineering applications.

In Vitro and In Vivo Correlation of Bone Morphogenetic Protein-2 Release Profiles from Complex Delivery Vehicles

Local sustained delivery of bioactive molecules from biomaterials is a promising strategy to enhance bone regeneration. To optimize delivery vehicles for bone formation, the design characteristics are tailored with consequential effect on bone morphogenetic protein-2 (BMP-2) release and bone regeneration. Complying with the 3R principles (Replacement, Reduction, and Refinement), the growth factor release is often investigated in vitro using several buffers to mimic the in vivo physiological environment. However, this remains an unmet need. Therefore, this study investigates the in vitro-in vivo correlation (IVIVC) of BMP-2 release from complex delivery vehicles in several commonly used in vitro buffers: cell culture model, phosphate buffered saline, and a strong desorption buffer. The results from this study showed that the release environment affected the BMP-2 release profiles, creating distinct relationships between release versus time and differences in extent of release. According to the guidance set by the U.S. Food and Drug Administration (FDA), IVIVC resulted in level A internal predictability for individual composites. Since the IVIVC was influenced by the BMP-2 loading method and composite surface chemistry, the external predictive value of the IVIVCs was limited. These results show that the IVIVCs can be used for predicting the release of an individual composite. However, the models cannot be used for predicting in vivo release for different composite formulations since they lack external predictability. Potential confounding effects of drug type, delivery vehicle formulations, and application site should be added to the equation to develop one single IVIVC applicable for complex delivery vehicles. Altogether, these results imply that more sophisticated in vitro systems should be used in bone regeneration to accurately discriminate and predict in vivo BMP-2 release from different complex delivery vehicles.

The Osteoinductive Effect of Controlled Bone Morphogenic Protein 2 Release Is Location Dependent

IMPACT STATEMENT

The main challenge in bone morphogenic protein 2 (BMP-2)-based application lies in finding strategies to prolong its biologic activity as it has a short biological half-life. The present study uses a phosphate-modified oligo[(polyethylene glycol) fumarate] hydrogel that can be tuned to achieve differential release profiles of biologically active BMP-2 release. We demonstrate that this platform outperforms Infuse^®, currently used in the clinic and that the osteoinductive effect of BMP-2 is location dependent. Altogether, this study stresses the importance of evaluating efficacy of bone tissue engineering strategies at an orthotopic location rather than subcutaneously. Even more so, it emphasizes the role of biomaterials as a scaffold to achieve proper bone tissue engineering.