Controlling the porosity and microarchitecture of hydrogels for tissue engineering

Magnesium vs. sodium alginate as precursors of calcium alginate: Mechanical differences and advantages in the development of functional neuronal networks

Calcium alginate is one of the most widely employed matrices in regenerative medicine. A downside is its heterogeneity, due to the poorly controllable character of the gelation of sodium alginate (NaAlg), i.e. the commonly used alginate salt, with calcium. Here, we have used magnesium alginate (MgAlg) as an alternative precursor of calcium alginate. MgAlg coils, more compact and thus less entangled than those of NaAlg, allow for an easier diffusion of calcium ions, whereas Mg is exchanged with calcium more slowly than Na; this allows for the formation of a material (Ca(Mg)Alg) with a more reversible creep behaviour than Ca(Na)Alg, due to a more homogeneous - albeit lower - density of elastically active cross-links. We also show that Ca(Mg)Alg supports better than Ca(Na)Alg the network development and function of embedded (rat cortical) neurons: they show greater neurite extension and branching at 7 and 21 days (Tubb3 and Map2 immunofluorescence) and better neuronal network functional maturation / more robust and longer-lasting activity, probed by calcium imaging and microelectrode array electrophysiology. Overall, our results unveil the potential of MgAlg as bioactive biomaterial for enabling the formation of functional neuron-based tissue analogues.

Enhancing volumetric muscle loss (VML) recovery in a rat model using super durable hydrogels derived from bacteria

Bacteria can be programmed to deliver natural materials with defined biological and mechanical properties for controlling cell growth and differentiation. Here, we present an elastic, resilient and bioactive polysaccharide derived from the extracellular matrix of Pantoea sp. BCCS 001. Specifically, it was methacrylated to generate a new photo crosslinkable hydrogel that we coined Pantoan Methacrylate or put simply PAMA. We have used it for the first time as a tissue engineering hydrogel to treat VML injuries in rats. The crosslinked PAMA hydrogel was super elastic with a recovery nearing 100 %, while mimicking the mechanical stiffness of native muscle. After inclusion of thiolated gelatin via a Michaelis reaction with acrylate groups on PAMA we could also guide muscle progenitor cells into fused and aligned tubes - something reminiscent of mature muscle cells. These results were complemented by sarcomeric alpha-actinin immunostaining studies. Importantly, the implanted hydrogels exhibited almost 2-fold more muscle formation and 50 % less fibrous tissue formation compared to untreated rat groups. In vivo inflammation and toxicity assays likewise gave rise to positive results confirming the biocompatibility of this new biomaterial system. Overall, our results demonstrate that programmable polysaccharides derived from bacteria can be used to further advance the field of tissue engineering. In greater detail, they could in the foreseeable future be used in practical therapies against VML.

Therapeutic efficacy of Strobilanthes urticifolia-infused pectin/polyacrylic acid hydrogel for targeted hepatorenal fibrosis mitigation: A multifaceted biomaterial approach

Pectin/polyacrylic acid (PPAA) hydrogel is a unique and versatile biomaterial with applications in drug delivery, wound healing, tissue engineering, and agriculture, owing to its tailored properties and multifunctional attributes. This study aims to harness the therapeutic potential of Strobilanthes urticifolia extract within a PPAA hydrogel matrix to attenuate liver and kidney fibrosis through targeted and sustained delivery of biologically active substances. PPAA hydrogel was prepared by free radical polymerization, followed by its porosity and swelling determination. The results depicted the porous nature of PPAA hydrogel and improved swelling properties at pH 7.4, confirming its drug delivery promise. The polyphenolic-enriched S. urticifolia extracts of leaf and flower were loaded onto PPAA hydrogel, and the loading efficiency was 87% (leaf) and 62.5% (flower). Moreover, slow-release studies showed controlled and prolonged release of polyphenols for 7 days. The polyphenolic-enriched hydrogel's microstructure was characterized using SEM, FTIR, and thermogravimetric analysis (TGA). SEM results revealed a highly porous structure of polyphenol enriched PPAA hydrogel, while FTIR analysis confirmed the presence of functional groups such as OH group of carboxylic acid, aliphatic CH2 stretching due to acrylic acid grafting with pectin, CO stretching due to acid linkage with pectin, CH of aromatic ring, and CH of carboxylate salt in PPAA hydrogel. TGA of PPAA hydrogel showed its stability up to 488°C. Additionally, the S. urticifolia extract loaded PPAA hydrogel displayed significant antibacterial properties and minimum inhibitory concentrations against both Gram-positive and Gram-negative bacteria. In vivo studies carried out on rats demonstrated that polyphenolic enriched PPAA hydrogel significantly attenuates liver and kidney fibrosis. Therefore, it is concluded from the present study that loading of polyphenolic enriched extract from leaves and flower of S. urticifolia enhanced the biomedical applications of PPAA hydrogel. RESEARCH HIGHLIGHTS: The PPAA hydrogel developed in this study exhibits a highly porous structure and improved swelling properties at physiological pH (7.4), making it an excellent candidate for drug delivery systems. S. urticifolia extracts, rich in polyphenols, were successfully incorporated into the PPAA hydrogel with high loading efficiencies of 87% for leaf and 62.5% for flower extracts. Loading of polyphenolic enriched extracts of S. urticifolia onto PPAA enhanced its biological activities such as antibacterial, hepatoprotective, and reno-protective activities as depicted by in vitro and in vivo studies.

Emulsion-Templated Gelatin/Amino Acids/Chitosan Macroporous Hydrogels with Adjustable Internal Dimensions for Three-Dimensional Stem Cell Culture

The demand for macroporous hydrogel scaffolds with interconnected porous and open-pore structures is crucial for advancing research and development in cell culture and tissue regeneration. Existing techniques for creating 3D porous materials and controlling their porosity are currently constrained. This study introduces a novel approach for producing highly interconnected aspartic acid-gelatin macroporous hydrogels (MHs) with precisely defined open pore structures using a one-step emulsification polymerization method with surface-modified silica nanoparticles as Pickering stabilizers. Macroporous hydrogels offer adjustable pore size and pore throat size within the ranges of 50 to 130 μm and 15 to 27 μm, respectively, achieved through variations in oil-in-water ratio and solid content. The pore wall thickness of the macroporous hydrogel can be as thin as 3.37 μm and as thick as 6.7 μm. In addition, the storage modulus of the macroporous hydrogels can be as high as 7250 Pa, and it maintains an intact rate of more than 92% after being soaked in PBS for 60 days, which is also good performance for use as a biomedical scaffold material. These hydrogels supported the proliferation of human dental pulp stem cells (hDPSCs) over a 30 day incubation period, stretching the cell morphology and demonstrating excellent biocompatibility and cell adhesion. The combination of these desirable attributes makes them highly promising for applications in stem cell culture and tissue regeneration, underscoring their potential significance in advancing these fields.

Preparation and Characterization of Hydrogels Fabricated From Chitosan and Poly(vinyl alcohol) for Tissue Engineering Applications

In this study, we report on the preparation, characterization, and cytocompatibility of hydrogels for biomedical applications made from two different molecular weights of chitosan (CS) blended with poly(vinyl alcohol) (PVA) and chemically cross-linked with tetraethyl orthosilicate (TEOS) followed by freeze-drying. A series of CS-PVA hydrogels were synthesized with different amounts of chitosan (1%, 2%, and 3% by weight). The structure of these CS-PVA hydrogels was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The hydrogel samples were also characterized for tensile strength, contact angle, swelling behavior, and degradation at physiological body temperature. Their physicochemical properties, biocompatibility, and cell viability when cultured with human dermal fibroblasts were assessed using alamarBlue and live/dead assays and compared to optimize their functionality. SEM analysis showed that the concentration and molecular weight of the chitosan component affected the pore size. Furthermore, the contact angle decreased with increasing chitosan content, indicating that chitosan increased its hydrophilic properties. The in vitro degradation study revealed a nonlinear time-dependent relationship between chitosan concentration or molecular weight, and the rate of degradation was affected by the pore size of the hydrogel. All of the CS-PVA hydrogels exhibited good cell proliferation, particularly with the high molecular weight chitosan samples.

Multifunctional Molybdenum-Based Nanoclusters Engineered Gelatin Methacryloyl as In Situ Photo-Cross-Linkable Hybrid Hydrogel Dressings for Enhanced Wound Healing

Skin injuries and wounds present significant clinical challenges, necessitating the development of advanced wound dressings for efficient wound healing and tissue regeneration. In this context, the advancement of hydrogels capable of counteracting the adverse effects arising from undesirable reactive oxygen species (ROS) is of significant importance. This study introduces a hybrid hydrogel with rapid photocuring and excellent conformability, tailored to ameliorate the hostile microenvironment of damaged skin tissues. The hybrid hydrogel, composed of photoresponsive Gelatin Methacryloyl (GelMA) and Molybdenum-based nanoclusters (MNC), exhibits physicochemical characteristics conductive to skin regeneration. In vitro studies demonstrated the cytocompatibility and ROS-responsive behavior of the MNC/GelMA hybrid hydrogels, confirming their ability to promote human dermal fibroblasts (HDF) functions. The incorporation of MNC into GelMA not only enhances HDF adhesion, proliferation, and migration but also shields against oxidative damage induced by hydrogen peroxide (H2O2). Notably, in vivo evaluation in murine full-thickness skin defects revealed that the application of hybrid hydrogel dressings led to reduced inflammation, accelerated wound closure, and enhanced collagen deposition in comparison to control groups. Significantly, this study introduced a convenient approach to develop in situ ROS-scavenging hydrogel dressings to accelerate the wound healing process without the need for exogenous cytokines or medications. We consider that the nanoengineering approach proposed herein offers potential possibilities for the development of therapeutic hydrogel dressings addressing various skin-related conditions.

A theory of hydrogel mechanics that couples swelling and external flow

Two aspects of hydrogel mechanics have been studied separately in the past. The first is the swelling and deswelling of gels in a quiescent solvent bath triggered by an environmental stimulus such as a change in temperature or pH, and the second is the solvent flow around and into a gel domain, driven by an external pressure gradient or moving boundary. The former neglects convection due to external flow, whereas the latter neglects solvent diffusion driven by a gradient in chemical potential. Motivated by engineering and biomedical applications where both aspects coexist and potentially interact with each other, this work presents a poroelasticity model that integrates these two aspects into a single framework, and demonstrates how the coupling between the two gives rise to novel physics in relatively simple one-dimensional and two-dimensional flows.

Development of 3D Printable Gelatin Methacryloyl/Chondroitin Sulfate/Hyaluronic Acid Hydrogels as Implantable Scaffolds

The development of biomaterials tailored for various tissue engineering applications has been increasingly researched in recent years; however, stimulating cells to synthesise the extracellular matrix (ECM) is still a significant challenge. In this study, we investigate the use of ECM-like hydrogel materials composed of Gelatin methacryloyl (GelMA) and glycosaminoglycans (GAG), such as hyaluronic acid (HA) and chondroitin sulphate (CS), to provide a biomimetic environment for tissue repair. These hydrogels are fully characterised in terms of physico-chemical properties, including compression, swelling behaviour, rheological behaviour and via 3D printing trials. Furthermore, porous scaffolds were developed through freeze drying, producing a scaffold morphology that better promotes cell proliferation, as shown by in vitro analysis with fibroblast cells. We show that after cell seeding, freeze-dried hydrogels resulted in significantly greater amounts of DNA by day 7 compared to the GelMA hydrogel. Furthermore, freeze-dried constructs containing HA or HA/CS were found to have a significantly higher metabolic activity than GelMA alone.

Harnessing the potential of hydrogels for advanced therapeutic applications: current achievements and future directions

The applications of hydrogels have expanded significantly due to their versatile, highly tunable properties and breakthroughs in biomaterial technologies. In this review, we cover the major achievements and the potential of hydrogels in therapeutic applications, focusing primarily on two areas: emerging cell-based therapies and promising non-cell therapeutic modalities. Within the context of cell therapy, we discuss the capacity of hydrogels to overcome the existing translational challenges faced by mainstream cell therapy paradigms, provide a detailed discussion on the advantages and principal design considerations of hydrogels for boosting the efficacy of cell therapy, as well as list specific examples of their applications in different disease scenarios. We then explore the potential of hydrogels in drug delivery, physical intervention therapies, and other non-cell therapeutic areas (e.g., bioadhesives, artificial tissues, and biosensors), emphasizing their utility beyond mere delivery vehicles. Additionally, we complement our discussion on the latest progress and challenges in the clinical application of hydrogels and outline future research directions, particularly in terms of integration with advanced biomanufacturing technologies. This review aims to present a comprehensive view and critical insights into the design and selection of hydrogels for both cell therapy and non-cell therapies, tailored to meet the therapeutic requirements of diverse diseases and situations.

An Elastin-Derived Composite Matrix for Enhanced Vascularized and Innervated Bone Tissue Reconstruction: From Material Development to Preclinical Evaluation

Despite progress in bone tissue engineering, reconstruction of large bone defects remains an important clinical challenge. Here, a biomaterial designed to recruit bone cells, endothelial cells, and neuronal fibers within the same matrix is developed, enabling bone tissue regeneration. The bioactive matrix is based on modified elastin-like polypeptides (ELPs) grafted with laminin-derived adhesion peptides IKVAV and YIGSR, and the SNA15 peptide for retention of hydroxyapatite (HA) particles. The composite matrix shows suitable porosity, interconnectivity, biocompatibility for endothelial cells, and the ability to support neurites outgrowth by sensory neurons. Subcutaneous implantation leads to the formation of osteoid tissue, characterized by the presence of bone cells, vascular networks, and neuronal structures, while minimizing inflammation. Using a rat femoral condyle defect model, longitudinal micro-CT analysis is performed, which demonstrates a significant increase in the volume of mineralized tissue when using the ELP-based matrix compared to empty defects and a commercially available control (Collapat). Furthermore, visible blood vessel networks and nerve fibers are observed within the lesions after a period of two weeks. By incorporating multiple key components that support cell growth, mineralization, and tissue integration, this ELP-based composite matrix provides a holistic and versatile solution to enhance bone tissue regeneration.

The importance of 3D fibre architecture in cancer and implications for biomaterial model design

The need for improved prediction of clinical response is driving the development of cancer models with enhanced physiological relevance. A new concept of 'precision biomaterials' is emerging, encompassing patient-mimetic biomaterial models that seek to accurately detect, treat and model cancer by faithfully recapitulating key microenvironmental characteristics. Despite recent advances allowing tissue-mimetic stiffness and molecular composition to be replicated in vitro, approaches for reproducing the 3D fibre architectures found in tumour extracellular matrix (ECM) remain relatively unexplored. Although the precise influences of patient-specific fibre architecture are unclear, we summarize the known roles of tumour fibre architecture, underlining their implications in cell-matrix interactions and ultimately clinical outcome. We then explore the challenges in reproducing tissue-specific 3D fibre architecture(s) in vitro, highlighting relevant biomaterial fabrication techniques and their benefits and limitations. Finally, we discuss imaging and image analysis techniques (focussing on collagen I-optimized approaches) that could hold the key to mapping tumour-specific ECM into high-fidelity biomaterial models. We anticipate that an interdisciplinary approach, combining materials science, cancer research and image analysis, will elucidate the role of 3D fibre architecture in tumour development, leading to the next generation of patient-mimetic models for mechanistic studies and drug discovery.

Estimating the interfacial permeability for flow into a poroelastic medium

Boundary conditions between a porous solid and a fluid has been a long-standing problem in modeling porous media. For deformable poroelastic materials such as hydrogels, the question is further complicated by the elastic stress from the solid network. Recently, an interfacial permeability condition has been developed from the principle of positive energy dissipation on the hydrogel-fluid interface. Although this boundary condition has been used in flow computations and yielded reasonable predictions, it contains an interfacial permeability η as a phenomenological parameter. In this work, we use pore-scale models of flow into a periodic array of solid cylinders or parallel holes to determine η as a function of the pore size and porosity. This provides a means to evaluate the interfacial permeability for a wide range of poroelastic materials, including hydrogels, foams and biological tissues, to enable realistic flow simulations.

Fabrication and Characterization of Porous PEGDA Hydrogels for Articular Cartilage Regeneration

Functional articular cartilage regeneration remains an unmet medical challenge, increasing the interest for innovative biomaterial-based tissue engineering (TE) strategies. Hydrogels, 3D macromolecular networks with hydrophilic groups, present articular cartilage-like features such as high water content and load-bearing capacity. In this study, 3D porous polyethylene glycol diacrylate (PEGDA) hydrogels were fabricated combining the gas foaming technique and a UV-based crosslinking strategy. The 3D porous PEGDA hydrogels were characterized in terms of their physical, structural and mechanical properties. Our results showed that the size of the hydrogel pores can be modulated by varying the initiator concentration. In vitro cytotoxicity tests showed that 3D porous PEGDA hydrogels presented high biocompatibility both with human chondrocytes and osteoblast-like cells. Importantly, the 3D porous PEGDA hydrogels supported the viability and chondrogenic differentiation of human bone marrow-derived mesenchymal stem/stromal cell (hBM-MSC)-based spheroids as demonstrated by the positive staining of typical cartilage extracellular matrix (ECM) (glycosaminoglycans (GAGs)) and upregulation of chondrogenesis marker genes. Overall, the produced 3D porous PEGDA hydrogels presented cartilage-like mechanical properties and supported MSC spheroid chondrogenesis, highlighting their potential as suitable scaffolds for cartilage TE or disease modelling strategies.

Agarose as a Tissue Mimic for the Porcine Heart, Kidney, and Liver: Measurements and a Springpot Model

Agarose gels are often used as a tissue mimic. The goal of this work was to determine the appropriate agarose concentrations that result in mechanical properties that match three different porcine organs. Strain tests were carried out with an amplitude varying from 0.01% to 10% at a frequency of 1 Hz on a range of agarose concentrations and porcine organs. Frequency sweep tests were performed from 0.1 Hz to a maximum of 9.5 Hz at a shear strain amplitude of 0.1% for agarose and porcine organs. In agarose samples, the effect of pre-compression of the samples up to 10% axial strain was considered during frequency sweep tests. The experimental measurements from agarose samples were fit to a fractional order viscoelastic (springpot) model. The model was then used to predict stress relaxation in response to a step strain of 0.1%. The prediction was compared to experimental relaxation data, and the results agreed within 12%. The agarose concentrations (by mass) that gave the best fit were 0.25% for the liver, 0.3% for the kidney, and 0.4% for the heart. At a frequency of 0.1 Hz and a shear strain of 0.1%, the agarose concentrations that best matched the shear storage modulus of the porcine organs were 0.4% agarose for the heart, 0.3% agarose for the kidney, and 0.25% agarose for the liver.

A natural hydrogel complex improves intervertebral disc degeneration by correcting fatty acid metabolism and inhibiting nucleus pulposus cell pyroptosis

The degeneration of intervertebral discs is strongly associated with the occurrence of pyroptosis in nucleus pulposus (NP) cells. This pyroptosis is characterized by abnormal metabolism of fatty acids in the degenerative pathological state, which is further exacerbated by the inflammatory microenvironment and degradation of the extracellular matrix. In order to address this issue, we have developed a fibrin hydrogel complex (FG@PEV). This intricate formulation amalgamates the beneficial attributes of platelet extravasation vesicles, contributing to tissue repair and regeneration. Furthermore, this complex showcases exceptional stability, gradual-release capabilities, and a high degree of biocompatibility. In order to substantiate the biological significance of FG@PEV in intervertebral disc degeneration (IVDD), we conducted a comprehensive investigation into its potential mechanism of action through the integration of RNA-seq sequencing and metabolomics analysis. Furthermore, these findings were subsequently validated through experimentation in both in vivo and in vitro models. The experimental results revealed that the FG@PEV intervention possesses the capability to reshape the inflammatory microenvironment within the disc. It also addresses the irregularities in fatty acid metabolism of nucleus pulposus cells, consequently hindering cellular pyroptosis and slowing down disc degeneration through the regulation of extracellular matrix synthesis and degradation. As a result, this injectable gel system represents a promising and innovative therapeutic approach for mitigating disc degeneration.

Sponge-like porous polyvinyl alcohol/chitosan-based hydrogel with integrated cushioning, pH-indicating and antibacterial functions

Developing a packaging material with integrated cushioning, intelligent and active functions is highly desired but remains challenging in the food industry. Here we show that a sponge-like porous hydrogel with pH-indicating and antibacterial additives can meet this requirement. We use polyvinyl alcohol and chitosan as the primary polymers to construct a hydrogel with hierarchical structures through a freeze-casting method in combination with salting-out treatment. The synergy of aggregated polymer chains and the sponge-like porous structure makes the hydrogel resilient and efficient in energy absorption. It also enables rapid movement of molecules/particles and fast reaction due to the large specific surface area of the pore structures and the large amount of free water in it, leading to a sensitive pH-indicating function. The hydrogel shows an obvious color variation within a wide pH range in 3 min. The silver nanoparticles are fixed in the dense polymer networks, enabling a lasting release of silver ions. The porous structure makes the silver ion reach the protected item in a short time, achieving an antibacterial effect against S. aureus and E. coli with little cytotoxicity. This work paves the way for fabricating multifunctional hydrogels for diverse advanced packaging systems.

Anti-Inflammatory Effect of Dental Pulpa Mesenchymal Stem Cell Exosomes Loaded Mucoadhesive Hydrogel on Mice with Dental Nickel Hypersensitivity

In this study, the anti-inflammatory effect of dental pulp mesenchymal stem cell (MSCs) exosomes loaded to mucoadhesive hydrogel is investigated in a dental nickel hypersensitivity murine model. After culture of dental pulp MSCs in the third passage MSCs are loaded to a mucoadhesive hydrogel based on chitosan, cross-linked with genipin and modified with catechol groups. A dental nickel hypersensitivity model is created by administering NiCl2 and 10 µg mL-1 lipopolysaccharide to 4-6 week-old Balb-c mice by intradermal injection. In mice treated with dental pulp MSC exosomes and exosomes in hydrogel, interferron gamma (IFN-γ) secreting CD4+T lymphocyte ratios significantly increase compared to the untreated group (p < 0.05). IFN-γ and interleukin 10 (IL-10) expression in buccal mucosa tissue sections and IFN-γ secreting CD4+T lymphocyte ratios are found to be significantly higher in mice treated with dental pulpa MSCs (DPMSCs) exosomes and DPMSCs exosomes in hydrogel compared to the untreated group (p < 0.05). According to flow cytometry results, IL-4 secreting CD4+T lymphocytes are found to be significantly decreased in DPMSCs exosomes group compared to dental nickel hypersensitivity group (p < 0.05). Administration of DPMSCs exosomes with mucoadhesive hydrogel may be an alternative to current medication in the treatment of dental nickel hypersensitivity.

Porosity Engineering of Dried Smart Poly(N-isopropylacrylamide) Hydrogels for Gas Sensing

A recent study unveiled the potential of acrylamide-based stimulus-responsive hydrogels for volatile organic compound detection in gaseous environments. However, for gas sensing, a large surface area, that is, a highly porous material, offering many adsorption sites is crucial. The large humidity variation in the gaseous environment constitutes a significant challenge for preserving an initially porous structure, as the pores tend to be unstable and irreversibly collapse. Therefore, the present investigation focuses on enhancing the porosity of smart PNiPAAm hydrogels under the conditions of a gaseous environment and the preservation of the structural integrity for long-term use. We have studied the influence of polyethylene glycol (PEG) as a porogen and the application of different drying methods and posttreatment. The investigations lead to the conclusion that only the combination of PEG addition, freeze-drying, and subsequent conditioning in high relative humidity enables a long-term stable formation of a porous surface and inner structure of the material. The significantly enhanced swelling response in a gaseous environment and in the test gas acetone is confirmed by gravimetric experiments of bulk samples and continuous measurements of thin films on piezoresistive pressure sensor chips. These measurements are furthermore complemented by an in-depth analysis of the morphology and microstructure. While the study was conducted for PNiPAAm, the insights and developed processes are general in nature and can be applied for porosity engineering of other smart hydrogel materials for VOC detection in gaseous environments.

Hydrogel-Based Systems in Neuro-Vascularized Bone Regeneration: A Promising Therapeutic Strategy

Blood vessels and nerve fibers are distributed throughout the skeletal tissue, which enhance the development and function of each other and have an irreplaceable role in bone formation and remodeling. Despite significant progress in bone tissue engineering, the inadequacy of nerve-vascular network reconstruction remains a major limitation. This is partly due to the difficulty of integrating and regulating multiple tissue types with artificial materials. Thus, understanding the anatomy and underlying coupling mechanisms of blood vessels and nerve fibers within bone to further develop neuro-vascularized bone implant biomaterials is an extremely critical aspect in the field of bone regeneration. Hydrogels have good biocompatibility, controllable mechanical characteristics, and osteoconductive and osteoinductive properties, making them important candidates for research related to neuro-vascularized bone regeneration. This review reports the classification and physicochemical properties of hydrogels, with a focus on the application advantages and status of hydrogels for bone regeneration. The authors also highlight the effect of neurovascular coupling on bone repair and regeneration and the necessity of achieving neuro-vascularized bone regeneration. Finally, the recent progress and design strategies of hydrogel-based biomaterials for neuro-vascularized bone regeneration are discussed.

Therapeutic applications of biological macromolecules and scaffolds for skeletal muscle regeneration: A review

Skeletal muscle (SM) mass and strength maintenance are important requirements for human well-being. SM regeneration to repair minor injuries depends upon the myogenic activities of muscle satellite (stem) cells. However, losses of regenerative properties following volumetric muscle loss or severe trauma or due to congenital muscular abnormalities are not self-restorable, and thus, these conditions have major healthcare implications and pose clinical challenges. In this context, tissue engineering based on different types of biomaterials and scaffolds provides an encouraging means of structural and functional SM reconstruction. In particular, biomimetic (able to transmit biological signals) and several porous scaffolds are rapidly evolving. Several biological macromolecules/biomaterials (collagen, gelatin, alginate, chitosan, and fibrin etc.) are being widely used for SM regeneration. However, available alternatives for SM regeneration must be redesigned to make them more user-friendly and economically feasible with longer shelf lives. This review aimed to explore the biological aspects of SM regeneration and the roles played by several biological macromolecules and scaffolds in SM regeneration in cases of volumetric muscle loss.

High-Throughput Single-Cell, Single-Mitochondrial DNA Assay Using Hydrogel Droplet Microfluidics

There is growing interest in understanding the biological implications of single cell heterogeneity and heteroplasmy of mitochondrial DNA (mtDNA), but current methodologies for single-cell mtDNA analysis limit the scale of analysis to small cell populations. Although droplet microfluidics have increased the throughput of single-cell genomic, RNA, and protein analysis, their application to sub-cellular organelle analysis has remained a largely unsolved challenge. Here, we introduce an agarose-based droplet microfluidic approach for single-cell, single-mtDNA analysis, which allows simultaneous processing of hundreds of individual mtDNA molecules within >10,000 individual cells. Our microfluidic chip encapsulates individual cells in agarose beads, designed to have a sufficiently dense hydrogel network to retain mtDNA after lysis and provide a robust scaffold for subsequent multi-step processing and analysis. To mitigate the impact of the high viscosity of agarose required for mtDNA retention on the throughput of microfluidics, we developed a parallelized device, successfully achieving ~95 % mtDNA retention from single cells within our microbeads at >700,000 drops/minute. To demonstrate utility, we analyzed specific regions of the single-mtDNA using a multiplexed rolling circle amplification (RCA) assay. We demonstrated compatibility with both microscopy, for digital counting of individual RCA products, and flow cytometry for higher throughput analysis.

Nanoparticles incorporated hydrogels for delivery of antimicrobial agents: developments and trends

The prevention and treatment of microbial infections is an imminent global public health concern due to the poor antimicrobial performance of the existing antimicrobial regime and rapidly emerging antibiotic resistance in pathogenic microbes. In order to overcome these problems and effectively control bacterial infections, various new treatment modalities have been identified. To attempt this, various micro- and macro-molecular antimicrobial agents that function by microbial membrane disruption have been developed with improved antimicrobial activity and lesser resistance. Antimicrobial nanoparticle-hydrogels systems comprising antimicrobial agents (antibiotics, biological extracts, and antimicrobial peptides) loaded nanoparticles or antimicrobial nanoparticles (metal or metal oxide) constitute an important class of biomaterials for the prevention and treatment of infections. Hydrogels that incorporate nanoparticles can offer an effective strategy for delivering antimicrobial agents (or nanoparticles) in a controlled, sustained, and targeted manner. In this review, we have described an overview of recent advancements in nanoparticle-hydrogel hybrid systems for antimicrobial agent delivery. Firstly, we have provided an overview of the nanoparticle hydrogel system and discussed various advantages of these systems in biomedical and pharmaceutical applications. Thereafter, different hybrid hydrogel systems encapsulating antibacterial metal/metal oxide nanoparticles, polymeric nanoparticles, antibiotics, biological extracts, and antimicrobial peptides for controlling infections have been reviewed in detail. Finally, the challenges and future prospects of nanoparticle-hydrogel systems have been discussed.

Adipose-derived stem cells loaded photocurable and bioprintable bioinks composed of GelMA, HAMA and PEGDA crosslinker to differentiate into smooth muscle phenotype

Developing a polymer-based photocrosslinked 3D printable scaffolds comprised of gelatin methacryloyl (G) and hyaluronic acid methacryloyl (H) incorporated with two molecular weights of polyethylene glycol diacrylate (P) of various concentrations that enables rabbit adipose-derived stem cells (rADSCs) to survive, grow, and differentiate into smooth muscle cells (SMCs). Then, the chemical modification and physicochemical properties of the PGH bioinks were evaluated. The cell viability was assessed via MTT, CCK-8 assay and visualized employing Live/Dead assay. In addition, the morphology and nucleus count of differentiated SMCs were investigated by adopting TRAP (tartrate-resistant acid phosphatase) staining, and quantitative RT-PCR analysis was applied to detect gene expression using two different SMC-specific gene markers α-SMA and SM-MHC. The SMC-specific protein markers namely α-SMA and SM-MHC were applied to investigate SMC differentiation ability by implementing Immunocytofluorescence staining (ICC) and western blotting. Moreover, the disk, square, and tubular cellular models of PGH7 (GelMA/HAMA=2/1) + PEGDA-8000 Da, 3% w/v) hybrid bioink were printed using an extrusion bioprinting and cell viability of rADSCs was also analysed within 3D printed square construct practising Live/Dead assay. The results elicited the overall viability of SMCs, conserving its phenotype in biocompatible PGH7 hybrid bioink revealing its great potential to regenerate SMCs associated organs repair.

Chitosan hydrogels enriched with bioactive phloroglucinol for controlled drug diffusion and potential wound healing

We report a facile strategy to prepare chitosan (CS) hydrogels that eliminates the need for chemical crosslinking for advanced biomedical therapies. This approach gives controlled properties to the hydrogels by incorporating a natural bioactive phenolic compound, phloroglucinol (PG), into their microstructure. The adsorption of PG onto CS chains enhanced the hydrogels' antioxidant activity by up to 25 % and resulted in a denser, more entangled structure, reducing the pore size by 59 μm while maintaining porosity above 94 %. This allowed us to finely adjust pore size and swelling capacity. These structural properties make these hydrogels well-suited for wound healing dressings, promoting fibroblast proliferation and exhibiting excellent hemocompatibility. Furthermore, to ensure the versatility of these hydrogels, herein, we demonstrate their potential as drug delivery systems, particularly for dermal infections. The drug release can be controlled by a combination of drug diffusion through the swollen hydrogel and relaxation of the CS chains. In summary, our hydrogels leverage the synergistic effects of CS's antibacterial and antifungal properties with PG's antimicrobial and anti-inflammatory attributes, positioning them as promising candidates for biomedical and pharmaceutical applications, more specifically in advanced wound healing therapies with local drug delivery.

Skeletal muscle regeneration with 3D bioprinted hyaluronate/gelatin hydrogels incorporating MXene nanoparticles

There has been significant progress in the field of three-dimensional (3D) bioprinting technology, leading to active research on creating bioinks capable of producing structurally and functionally tissue-mimetic constructs. Ti3C2Tx MXene nanoparticles (NPs), promising two-dimensional nanomaterials, are being investigated for their potential in muscle regeneration due to their unique physicochemical properties. In this study, we integrated MXene NPs into composite hydrogels made of gelatin methacryloyl (GelMA) and hyaluronic acid methacryloyl (HAMA) to develop bioinks (namely, GHM bioink) that promote myogenesis. The prepared GHM bioinks were found to offer excellent printability with structural integrity, cytocompatibility, and microporosity. Additionally, MXene NPs within the 3D bioprinted constructs encouraged the differentiation of C2C12 cells into skeletal muscle cells without additional support of myogenic agents. Genetic analysis indicated that representative myogenic markers both for early and late myogenesis were significantly up-regulated. Moreover, animal studies demonstrated that GHM bioinks contributed to enhanced regeneration of skeletal muscle while reducing immune responses in mice models with volumetric muscle loss (VML). Our results suggest that the GHM hydrogel can be exploited to craft a range of strategies for the development of a novel bioink to facilitate skeletal muscle regeneration because these MXene-incorporated composite materials have the potential to promote myogenesis.

Photo-/thermo-responsive bioink for improved printability in extrusion-based bioprinting

Extrusion-based bioprinting has demonstrated significant potential for manufacturing constructs, particularly for 3D cell culture. However, there is a greatly limited number of bioink candidates exploited with extrusion-based bioprinting, as they meet the opposing requirements for printability with indispensable rheological features and for biochemical functionality with desirable microenvironment. In this study, a blend of silk fibroin (SF) and iota-carrageenan (CG) was chosen as a cell-friendly printable material. The SF/CG ink exhibited suitable viscosity and shear-thinning properties, coupled with the rapid sol-gel transition of CG. By employing photo-crosslinking of SF, the printability with Pr value close to 1 and structural integrity of the 3D constructs were significantly improved within a matter of seconds. The printed constructs demonstrated a Young's modulus of approximately 250 kPa, making them suitable for keratinocyte and myoblast cell culture. Furthermore, the high cell adhesiveness and viability (maximum >98%) of the loaded cells underscored the considerable potential of this 3D culture scaffold applied for skin and muscle tissues, which can be easily manipulated using an extrusion-based bioprinter.

Carboxymethyl cellulose-agarose hydrogel in poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibers: A novel tissue engineered skin graft

Healing chronic and critical-sized full-thickness wounds is a major challenge in the healthcare sector. Scaffolds prepared using electrospinning and hydrogels serve as effective treatment options for wound healing by mimicking the native skin microenvironment. Combining synthetic nanofibers with tunable hydrogel properties can effectively overcome limitations in skin scaffolds made only with nanofibers or hydrogels. In this study, a biocompatible hybrid scaffold was developed for wound healing applications using poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibers embedded with hydrogel made of 2 % carboxymethyl cellulose (CMC) blended with 1 % agarose. Hybrid scaffolds, characterized for surface morphology, swellability, porosity, and degradation, were found to be suitable for wound healing. Furthermore, the incorporation of CMC-agarose hydrogel into nanofibers significantly enhanced their mechanical strength compared to PHBV nanofibers alone (p < 0.05). Extract cytotoxicity and direct cytotoxicity tests showed that the hybrid scaffolds developed in this study are cytocompatible (>75 % viability). Furthermore, human adult dermal fibroblasts (HDFa) and human adult immortalized keratinocytes (HaCaT) adhesion, viability, and proliferation studies revealed that the hybrid scaffolds exhibited a significant increase in cell proliferation over time, similar to PHBV nanofibers. Finally, the developed hybrid scaffolds were evaluated in rat full-thickness wounds, demonstrating their ability to promote full-thickness wound healing with reepithelialization and epidermis closure.

A Comprehensive Review of Hydrogel-Based Drug Delivery Systems: Classification, Properties, Recent Trends, and Applications

As adaptable biomaterials, hydrogels have shown great promise in several industries, which include the delivery of drugs, engineering of tissues, biosensing, and regenerative medicine. These hydrophilic polymer three-dimensional networks have special qualities like increased content of water, soft, flexible nature, as well as biocompatibility, which makes it excellent candidates for simulating the extracellular matrix and promoting cell development and tissue regeneration. With an emphasis on their design concepts, synthesis processes, and characterization procedures, this review paper offers a thorough overview of hydrogels. It covers the various hydrogel material types, such as natural polymers, synthetic polymers, and hybrid hydrogels, as well as their unique characteristics and uses. The improvements in hydrogel-based platforms for controlled drug delivery are examined. It also looks at recent advances in bioprinting methods that use hydrogels to create intricate tissue constructions with exquisite spatial control. The performance of hydrogels is explored through several variables, including mechanical properties, degradation behaviour, and biological interactions, with a focus on the significance of customizing hydrogel qualities for particular applications. This review paper also offers insights into future directions in hydrogel research, including those that promise to advance the discipline, such as stimuli-responsive hydrogels, self-healing hydrogels, and bioactive hydrogels. Generally, the objective of this review paper is to provide readers with a detailed grasp of hydrogels and all of their potential uses, making it an invaluable tool for scientists and researchers studying biomaterials and tissue engineering.

Surface-modified deproteinized human demineralized tooth matrix for bone regeneration: physicochemical characterization and osteoblast cell biocompatibility

Tooth presents an intriguing option as a bone graft due to its compositional similarity to bone. However, the deproteinized human demineralized tooth matrix (dpDTM), developed to overcome the limited availability of autologous tooth grafts, has suboptimal pore size and surface roughness. This study aimed to fabricate a surface-modified dpDTM using acid etching and collagen coating, followed by in vitro evaluation of physicochemical and biological properties. The dpDTM was modified into two protocols: Acid-modified dpDTM (A-dpDTM) and collagen-modified dpDTM (C-dpDTM). Results demonstrated that A-dpDTM and C-dpDTM had increased pore sizes and rougher surfaces compared to dpDTM. Collagen immobilization was evidenced by nitrogen presence exclusively in C-dpDTM. All groups had a Ca/P molar ratio of 1.67 and hydroxyapatite as the sole constituent, with 65-67% crystallinity. Degradation rates significantly increased to 30% and 20% for C-dpDTM and A-dpDTM, respectively, compared to 10% for dpDTM after 120 days. Cumulative collagen release of C-dpDTM on Day 30 was 45.16 µg/ml. Osteoblasts attachment and proliferation were enhanced on all scaffolds, especially C-dpDTM, which displayed the highest proliferation and differentiation rates. In conclusion, surface modified of dpDTM, including A-dpDTM and C-dpDTM, significantly enhances bioactivity by altering surface properties and promoting osteoblast activity, thereby demonstrating promise for bone regeneration applications.

Hydrogel: a new material for intravesical drug delivery after bladder cancer surgery

The standard treatment for non-muscle invasive bladder cancer (NMIBC) is transurethral resection of bladder tumor (TURBT). However, this procedure may miss small lesions or incompletely remove them, resulting in cancer recurrence or progression. As a result, intravesical instillation of chemotherapy or immunotherapy drugs is often used as an adjunctive treatment after TURBT to prevent cancer recurrence. In the traditional method, drugs are instilled into the patient's bladder through a urinary catheter under sterile conditions. However, this treatment exposes the bladder mucosa to the drug directly, leading to potential side effects like chemical cystitis. Furthermore, this treatment has several limitations, including a short drug retention period, susceptibility to urine dilution, low drug permeability, lack of targeted effect, and limited long-term clinical efficacy. Hydrogel, a polymer material with a high-water content, possesses solid elasticity and liquid fluidity, making it compatible with tissues and environmentally friendly. It exhibits great potential in various applications. One emerging use of hydrogels is in intravesical instillation. By employing hydrogels, drug dilution is minimized, and drug absorption, retention, and persistence in the bladder are enhanced due to the mucus-adhesive and flotation properties of hydrogel materials. Furthermore, hydrogels can improve drug permeability and offer targeting capabilities. This article critically examines the current applications and future prospects of hydrogels in the treatment of bladder cancer.

Bioadhesive Hyaluronic Acid-Based Hydrogels for Spinal Cord Injury

Spinal cord injuries (SCI) have devastating physical, psychological, and psychosocial consequences for patients. One challenge of nerve tissue repair is the lack of a natural extracellular matrix (ECM) that guides the regenerating axons. Hyaluronic acid (HA) is a major ECM component and plays a fundamental role in facilitating lesion healing. Herein, we developed HA-based adhesive hydrogels by modification of HA with dopamine, a mussel-inspired compound with excellent adhesive properties in an aqueous environment. The hydrogels were loaded with the anti-inflammatory drug ibuprofen and the response of neuronal cells (SH-SY5Y) was evaluated in terms of viability, morphology, and adhesion. The obtained results suggested that the developed materials can bridge lesion gaps, guide axonal growth, and simultaneously act as a vehicle for the delivery of bioactive compounds.

Construction of a PEGDA/chitosan hydrogel incorporating mineralized copper-doped mesoporous silica nanospheres for accelerated bone regeneration

Hydrogels, integrating diverse biocompatible materials, have emerged as promising candidates for bone repair applications. This study presents a double network hydrogel designed for bone tissue engineering, combining poly(ethylene glycol) diacrylate (PEGDA) and chitosan (CS) crosslinked through UV polymerization and ionic crosslinking. Concurrently, copper-doped mesoporous silica nanospheres (Cu-MSNs) were synthesized using a one-pot method. Cu-MSNs underwent additional modification through in-situ biomineralization, resulting in the formation of an apatite layer. Polydopamine was employed to facilitate the deposition of Calcium (Ca) and Phosphate (P) ions on the surface of Cu-MSNs (Cu-MSNs/PDA@CaP). Composite hydrogels were created by integrating varied concentrations of Cu-MSNs/PDA@CaP (25, 50, 100, 150, 200 μg/mL). Characterization unveiled distinctive interconnected porous structures within the composite hydrogel, showcasing a notable 169.6 % enhancement in compressive stress (elevating from 89.01 to 240.19 kPa) compared to pure PEGDA. In vitro biocompatibility experiments illustrated that the composite hydrogel maintained elevated cell viability (up to 106.6 %) and facilitated rapid cell proliferation over 7 days. The hydrogel demonstrated a substantial 57.58 % rise in ALP expression and a surprising 235.27 % increase in ARS staining. Moreover, it significantly enhanced the expression of crucial osteogenic genes, such as run-related transcription factors 2 (RUNX2), collagen 1a1 (Col1a1), and secreted phosphoprotein 1 (Spp1), establishing it as a promising scaffold for bone regeneration. This study shows how Cu-MSNs/PDA@CaP were successfully integrated into a double network hydrogel, resulting in a composite material with good biological responses. Due to its improved characteristics, this composite hydrogel holds the potential for advancing bone regeneration procedures.

Reasoning on Pore Terminology in 3D Bioprinting

Terminology is pivotal for facilitating clear communication and minimizing ambiguity, especially in specialized fields such as chemistry. In materials science, a subset of chemistry, the term "pore" is traditionally linked to the International Union of Pure and Applied Chemistry (IUPAC) nomenclature, which categorizes pores into "micro", "meso", and "macro" based on size. However, applying this terminology in closely-related areas, such as 3D bioprinting, often leads to confusion owing to the lack of consensus on specific definitions and classifications tailored to each field. This review article critically examines the current use of pore terminology in the context of 3D bioprinting, highlighting the need for reassessment to avoid potential misunderstandings. We propose an alternative classification that aligns more closely with the specific requirements of bioprinting, suggesting a tentative size-based division of interconnected pores into 'parvo'-(d < 25 µm), 'medio'-(25 < d < 100 µm), and 'magno'-(d > 100 µm) pores, relying on the current understanding of the pore size role in tissue formation. The introduction of field-specific terminology for pore sizes in 3D bioprinting is essential to enhance the clarity and precision of research communication. This represents a step toward a more cohesive and specialized lexicon that aligns with the unique aspects of bioprinting and tissue engineering.

Composite Bioprinted Hydrogels Containing Porous Polymer Microparticles Provide Tailorable Mechanical Properties for 3D Cell Culture

The mechanical and architectural properties of the three-dimensional (3D) tissue microenvironment can have large impacts on cellular behavior and phenotype, providing cells with specialized functions dependent on their location. This is especially apparent in macrophage biology where the function of tissue resident macrophages is highly specialized to their location. 3D bioprinting provides a convenient method of fabricating biomaterials that mimic specific tissue architectures. If these printable materials also possess tunable mechanical properties, they would be highly attractive for the study of macrophage behavior in different tissues. Currently, it is difficult to achieve mechanical tunability without sacrificing printability, scaffold porosity, and a loss in cell viability. Here, we have designed composite printable biomaterials composed of traditional hydrogels [nanofibrillar cellulose (cellulose) or methacrylated gelatin (gelMA)] mixed with porous polymeric high internal phase emulsion (polyHIPE) microparticles. By varying the ratio of polyHIPEs to hydrogel, we fabricate composite hydrogels that mimic the mechanical properties of the neural tissue (0.1-0.5 kPa), liver (1 kPa), lungs (5 kPa), and skin (10 kPa) while maintaining good levels of biocompatibility to a macrophage cell line.

Granular Hydrogels Improve Myogenic Invasion and Repair after Volumetric Muscle Loss

Skeletal muscle injuries including volumetric muscle loss (VML) lead to excessive tissue scarring and permanent functional disability. Despite its high prevalence, there is currently no effective treatment for VML. Bioengineering interventions such as biomaterials that fill the VML defect to support cell and tissue growth are a promising therapeutic strategy. However, traditional biomaterials developed for this purpose lack the pore features needed to support cell infiltration. The present study investigates for the first time, the impact of granular hydrogels on muscle repair - hypothesizing that their flowability will permit conformable filling of the defect site and their inherent porosity will support the invasion of native myogenic cells, leading to effective muscle repair. Small and large microparticle fragments are prepared from photocurable hyaluronic acid polymer via extrusion fragmentation and facile size sorting. In assembled granular hydrogels, particle size and degree of packing significantly influence pore features, rheological behavior, and injectability. Using a mouse model of VML, it is demonstrated that, in contrast to bulk hydrogels, granular hydrogels support early-stage (satellite cell invasion) and late-stage (myofiber regeneration) muscle repair processes. Together, these results highlight the promising potential of injectable and porous granular hydrogels in supporting endogenous repair after severe muscle injury.

Carbon quantum dot-nanocomposite hydrogel as Denovo Nexus in rapid chondrogenesis

The incapability of cartilage to naturally regenerate and repair chronic muscular injuries urges the development of competent bionic rostrums. There is a need to explore faster strategies for chondrogenic engineering using mesenchymal stem cells (MSCs). Along these lines, rapid chondrocyte differentiation would benefit the transplantation demand affecting osteoarthritis (OA) and rheumatoid arthritis (RA) patients. In this report, a de novo nanocomposite was constructed by integrating biogenic carbon quantum dot (CQD) filler into synthetic hydrogel prepared from dimethylaminoethyl methacrylate (DMAEMA) and acrylic acid (AAc). The dominant structural integrity of synthetic hydrogel along with the chondrogenic differentiation potential of garlic peel derived CQDs led to faster chondrogenesis within 14 days. By means of extensive chemical and morphological characterization techniques, we illustrate that the hydrogel nanocomposite possesses lucrative features to influence rapid chondrogenesis. These results were further corroborated by bright field imaging, Alcian blue staining and Masson trichome staining. Thus, this stratagem of chondrogenic engineering conceptualizes to be a paragon in clinical wound care for the rapid manufacturing of chondrocytes.

Biomimetic injectable and bilayered hydrogel scaffold based on collagen and chondroitin sulfate for the repair of osteochondral defects

The simultaneous regeneration of articular cartilage and subchondral bone is a major challenge. Bioinspired scaffolds with distinct regions resembling stratified anatomical architecture provide a potential strategy for osteochondral defect repair. Here, we report the development of an injectable and bilayered hydrogel scaffold with a strong interface binding force. In this bilayer hydrogel, composed of carbonyl hydrazide grafted collagen (COL-CDH) and oxidized chondroitin sulfate (OCS), which are derivatives of osteochondral tissue components, in combination with poly (ethylene glycol) diacrylate (PEGDA), functions as a cartilage layer; while zinc-doped hydroxyapatite acts as a subchondral bone layer that is based on the cartilage layer. The strong interface between the two layers involves dynamic amide bonds formed between COL-CDH and OCS, and permanent CC bonds formed by PEGDA radical reactions. This bilayer hydrogel can be used to inoculate adipose mesenchymal stem cells which can then differentiate into chondrocytes and osteoblasts, secreting glycosaminoglycan, and promoting calcium deposition. This accelerates the regeneration of cartilage and subchondral bone. Micro-CT and tissue staining revealed an increase in the amount of bone present in new subchondral bone, and new tissues with a structure similar to normal cartilage. This study therefore demonstrates that injectable bilayer hydrogels are a promising scaffold for repairing osteochondral defects.

Bioactive and biomimetic 3D scaffolds for bone tissue engineering using graphitic carbon nitride as a sustainable visible light photoinitiator

Graphitic carbon nitride (g-C3N4) is explored as a novel sustainable visible light photoinitiator for the preparation of biomimetic 3D hydrogel scaffolds comprising gelatin methacrylamide (GelMA) and dopamine methacrylamide for use in tissue engineering. The initiator efficiency was assessed by comparing the swelling behavior and the stability of photopolymerized hydrogels prepared with GelMA of different degrees of functionalization and different comonomer compositions. Bioactive composite hydrogels with a 50 wt% nanohydroxyapatite (nHAp) content, to closely mimic the actual bone composition, were successfully obtained by the introduction of nHAp in the prepolymer solutions followed by photopolymerization. The composite hydrogels demonstrated enhanced mechanical properties and excellent stability in PBS verifying the preparation of robust 3D scaffolds for use in cancellous or pre-calcified bone tissue engineering applications. The in vitro cell response of the composite scaffolds exhibited high cell viability and enhanced differentiation of pre-osteoblasts to mature osteoblasts, demonstrating their osteogenic potential. This work establishes, for the first time, the excellent properties of g-C3N4 as a sustainable, visible light initiator, fully satisfying the principles of green chemistry, for the preparation of robust and biologically relevant hydrogels, and proposes a new approach to overcome the main challenges of conventional photoinitiators in cell scaffold fabrication, such as photobleaching, high cost and non-scalable synthesis employing toxic organic precursors and solvents.

An Injectable Composite Hydrogel of Verteporfin-Bonded Carboxymethyl Chitosan and Oxidized Sodium Alginate Facilitates Scarless Full-Thickness Skin Regeneration

Full-thickness skin defect has always been a major challenge in clinics due to fibrous hyperplasia in the repair process. Hydrogel composite dressings loaded with anti-fibrotic drugs have been considered as a promising strategy for scarless skin regeneration. In this work, a hydrogel composite (VP-CMCS-OSA) of carboxymethyl chitosan (CMCS) and oxidized sodium alginate (OSA), with loading anti-fibrotic drug verteporfin (VP), is developed based on two-step chemical reactions. Verteporfin is bonded with carboxymethyl chitosan through EDC/NHS treatment to form VP-CMCS, and then VP-CMCS is crosslinked with oxidized sodium alginate by Schiff base reaction to form VP-CMCS-OSA hydrogel. The characterization by SEM, FTIR, and UV-Vis shows the microstructure and chemical bonding of VP-CMCS-OSA. VP-CMCS-OSA hydrogel demonstrates the properties of high tissue adhesion, strong self-healing, and tensile ability. In the full-thickness skin defect model, the VP-CMCS-OSA composite hydrogels hasten wound healing due to the synergistic effects of hydrogels and verteporfin administration. The histological examination reveals the regular collagen arrangement and more skin appendages after VP-CMCS-OSA composite hydrogel treatment, indicating the full-thickness skin regeneration without potential scar formation. The outcomes suggest that the verteporfin-loaded composite hydrogel could be a potential method for scarless skin regeneration.

A novel injectable sericin hydrogel with strong fluorescence for tracing

Hydrogel systems with strong fluorescence, as convenient tracers or bio-probes, have attracted much attention in biomedical engineering. Currently, most hydrogels endowed fluorescent properties due to modifying additional fluorophores. However, these fluorophores owing to photobleaching and toxicity limit the practical applications of hydrogels. Herein, we prepared a novel self-luminescence hydrogel through double crosslinking glutaraldehyde and hydrogen peroxide/horseradish peroxidase (H2O2/HRP) with sericin protein. The double cross-linked sericin hydrogel exhibits strong green and red intrinsic fluorescence which can be excited over a wide range of wavelengths. Moreover, this hydrogel with strong intrinsic fluorescence could penetrate thick pigskin tissue, which has potential application in implantable bio-tracer areas. In addition to the above unique properties, this sericin hydrogel possesses two types of micropore structures with high porosity, swelling properties, pH-responsive degradability, super elasticity, injectability, viscosity, and excellent biocompatibility. The investigation could significantly expand the scope of protein hydrogels in biomedical applications.

High-throughput single-cell, single-mitochondrial DNA assay using hydrogel droplet microfluidics

There is growing interest in understanding the biological implications of single cell heterogeneity and intracellular heteroplasmy of mtDNA, but current methodologies for single-cell mtDNA analysis limit the scale of analysis to small cell populations. Although droplet microfluidics have increased the throughput of single-cell genomic, RNA, and protein analysis, their application to sub-cellular organelle analysis has remained a largely unsolved challenge. Here, we introduce an agarose-based droplet microfluidic approach for single-cell, single-mtDNA analysis, which allows simultaneous processing of hundreds of individual mtDNA molecules within >10,000 individual cells. Our microfluidic chip encapsulates individual cells in agarose beads, designed to have a sufficiently dense hydrogel network to retain mtDNA after lysis and provide a robust scaffold for subsequent multi-step processing and analysis. To mitigate the impact of the high viscosity of agarose required for mtDNA retention on the throughput of microfluidics, we developed a parallelized device, successfully achieving ~95% mtDNA retention from single cells within our microbeads at >700,000 drops/minute. To demonstrate utility, we analyzed specific regions of the single mtDNA using a multiplexed rolling circle amplification (RCA) assay. We demonstrated compatibility with both microscopy, for digital counting of individual RCA products, and flow cytometry for higher throughput analysis.

Self-Healable Adhesive Hydrogel with a Preserved Underwater Adhesive Ability Based on Histidine-Zinc Coordination and a Bioengineered Hybrid Mussel Protein

Mussels are marine organisms that are capable of constructing an underwater adhesion between their bodies and rigid structures. It is well known that mussels achieve underwater adhesion through the presence of mussel adhesive proteins (MAPs) that contain high levels of 3,4-dihydroxyphenylalanine (DOPA). Although the extraordinary underwater adhesive properties of mussels are attributed to DOPA, its capacity to play a dual role in surface adhesion and internal cohesion is inherently limited. However, mussels employ a combination of chemical moieties, not just DOPA, along with anatomical components, such as plaque and byssus, in underwater adhesion. This also involves junction proteins that connect the plaque and byssus. In this study, a novel hybrid MAP was bioengineered via the fusion of the plaque protein (foot protein type 1) and the histidine-rich domain of the junction protein (foot protein type 4). To achieve direct adhesion underwater, the adhesive should maintain surface adhesion without disintegrating. Notably, the histidine-Zn-coordinated hybrid MAP hydrogel maintained a high surface adhesion ability even after cross-linking because of the preservation of its unoxidized and non-cross-linked DOPA moieties. The formulated adhesive hydrogel system based on the bioengineered hybrid MAP exhibited self-healing properties, owing to the reversible metal coordination bonds. The developed adhesive hydrogel exhibits outstanding levels of bulk adhesion in underwater environments, highlighting its potential as an effective adhesive biomaterial. Therefore, the introduction of histidine-rich domains into MAPs may be applied in various studies to formulate mussel-inspired adhesives with self-healing properties and to fully utilize the adhesive ability of DOPA.

Tuning Physical Properties of GelMA Hydrogels through Microarchitecture for Engineering Osteoid Tissue

Gelatin methacryloyl (GelMA) hydrogels have gained significant attention due to their biocompatibility and tunable properties. Here, a new approach to engineer GelMA-based matrices to mimic the osteoid matrix is provided. Two cross-linking methods were employed to mimic the tissue stiffness: standard cross-linking (SC) based on visible light exposure (VL) and dual cross-linking (DC) involving physical gelation, followed by VL. It was demonstrated that by reducing the GelMA concentration from 10% (G10) to 5% (G5), the dual-cross-linked G5 achieved a compressive modulus of ∼17 kPa and showed the ability to support bone formation, as evidenced by alkaline phosphatase detection over 3 weeks of incubation in osteogenic medium. Moreover, incorporating poly(ethylene) oxide (PEO) into the G5 and G10 samples was found to hinder the fabrication of highly porous hydrogels, leading to compromised cell survival and reduced osteogenic differentiation, as a consequence of incomplete PEO removal.

Microbe-cellulose hydrogels as a model system for particulate carbon degradation in soil aggregates

Particulate carbon (C) degradation in soils is a critical process in the global C cycle governing greenhouse gas fluxes and C storage. Millimeter-scale soil aggregates impose strong controls on particulate C degradation by inducing chemical gradients of e.g. oxygen, as well as limiting microbial mobility in pore structures. To date, experimental models of soil aggregates have incorporated porosity and chemical gradients but not particulate C. Here, we demonstrate a proof-of-concept encapsulating microbial cells and particulate C substrates in hydrogel matrices as a novel experimental model for soil aggregates. Ruminiclostridium cellulolyticum was co-encapsulated with cellulose in millimeter-scale polyethyleneglycol-dimethacrylate (PEGDMA) hydrogel beads. Microbial activity was delayed in hydrogel-encapsulated conditions, with cellulose degradation and fermentation activity being observed after 13 days of incubation. Unexpectedly, hydrogel encapsulation shifted product formation of R. cellulolyticum from an ethanol-lactate-acetate mixture to an acetate-dominated product profile. Fluorescence microscopy enabled simultaneous visualization of the PEGDMA matrix, cellulose particles, and individual cells in the matrix, demonstrating growth on cellulose particles during incubation. Together, these microbe-cellulose-PEGDMA hydrogels present a novel, reproducible experimental soil surrogate to connect single cells to process outcomes at the scale of soil aggregates and ecosystems.

Data-driven supervised machine learning to predict the compressive response of porous PVA/Gelatin hydrogels and in-vitro assessments: Employing design of experiments

The purpose of this study is to design and evaluate a series of porous hydrogels by considering three independent variables using the Box-Behnken method. Accordingly, concentrations of the constituent macromolecules of the hydrogels, Polyvinyl Alcohol and Gelatin, and concentration of the crosslinking agent are varied to fabricate sixteen different porous samples utilizing the lyophilization process. Subsequently, the porous hydrogels are subjected to a battery of tests, including Fourier Transform Infrared spectroscopy, morphology assessment, pore-size study, porosimetry, uniaxial compression, and swelling measurements. Additionally, in-vitro cell assessments are performed by culturing mouse fibroblast cells (L-929) on the hydrogels, where viability, proliferation, adhesion, and morphology of the L-929 cells are monitored over 24, 48, and 72 h to evaluate the biocompatibility of these biomaterials. To better understand the mechanical behavior of the hydrogels under compressive loadings, Deep Neural Networks (DNNs) are implemented to predict and capture their compressive stress-strain responses as a function of the constituent materials' concentrations and duration of the performed mechanical tests. Overall, this study emphasizes the importance of considering multiple variables in the design of porous hydrogels, provides a comprehensive evaluation of their mechanical and biological properties, and, particularly, implements DNNs in the prediction of the hydrogels' stress-strain responses.

A novel multifunctional chitosan-gelatin/carboxymethyl cellulose-alginate bilayer hydrogel containing human placenta extract for accelerating full-thickness wound healing

The replication of skin's dermal and epidermal morphology within a full-thickness wound using a bi-layer hydrogel to cater to their distinct needs is a compelling pursuit. Moreover, human placenta extract (HPE), containing a diverse array of bioactive agents, has proven to be effective in promoting the wound healing process and enhancing epidermal keratinocytes. This study presents a multifunctional bi-layer hydrogel incorporating HPE for accelerating full-thickness wound healing through sustained HPE release, inhibition of bacteria invasion, and promotion of cell proliferation. The upper layer of the scaffold, known as the dressing layer, is composed of carboxymethyl cellulose and sodium alginate, serving as a supportive layer for cell proliferation. The under layer, referred to as the regenerative layer, is composed of chitosan and gelatin, providing an extracellular matrix-like, porous, moist, and antibacterial environment for cell growth. The scaffold was optimized to replicate the morphology of the dermal and epidermal layers, with suitable fibroblast infiltration and a pore size of approximately 283μm. Furthermore, the degradation rate of the samples matched the wound healing rate and persisted throughout this period. The sustained HPE release rate, facilitated by the degradation rate, was optimized to reach ~98% after 28 days, covering the entire healing period. The samples demonstrated robust antibacterial capabilities, with bacterial inhibition zone diameters of and 2.63±0.12cm for S. aureus and E. coli, respectively. The biocompatibility of the samples remained at approximately 68.33±4.5% after 21 days of fibroblast cell culture. The in vivo experiment indicated that the HPE@Bilayer hydrogel promotes the formation of new blood vessels and fibroblasts during the early stages of healing, leading to the appropriate formation of granulation tissue and a wound contraction rate of (79.31±3.1)%. Additionally, it resulted in the formation of a thick epidermal layer (keratinization) that effectively covered all the impaired areas, achieving a wound contraction rate of 95.83±6.3% at the late stage of wound healing. Furthermore, immunohistochemistry staining for CD31 and TGF-β revealed that the HPE@Bilayer group had 22 blood vessels/field and 34%-66% immunoactive cells, respectively, after 14 days of healing. However, by day 21, angiogenesis and TGF-β expression had declined, demonstrating that the wounds had been successfully treated with minimal scarring.

Fabrication and characterization of an antibacterial chitosan-coated allantoin-loaded NaCMC/SA skin scaffold for wound healing applications

The field of tissue engineering has recently emerged as one of the most promising approaches to address the limitations of conventional tissue replacements for severe injuries. This study introduces a chitosan-coated porous skin scaffold based on sodium carboxymethyl cellulose (NaCMC) and sodium alginate (SA) hydrogels, incorporating allantoin (AL) as an antibacterial agent. The NaCMC/SA hydrogel was cross-linked with epichlorohydrin (ECH) and freeze-dried to obtain a three-dimensional porous structure. The coated and non-coated scaffolds underwent comprehensive evaluation and characterization through various in-vitro analyses, including SEM imaging, swelling, degradation, and mechanical assessments. Furthermore, the scaffolds were studied regarding their allantoin (AL) release profiles, antibacterial properties, cell viability, and cell adhesion. The in-vitro analyses revealed that adding a chitosan (CS) coating and allantoin (AL) to the NaCMC/SA hydrogel significantly improved the scaffolds' antibacterial properties and cell viability. It was observed that the NaCMC:SA ratio and ECH concentration influenced the swelling capacity, biodegradation, drug release profile, and mechanical properties of the scaffolds. Samples with higher NaCMC content exhibited enhanced swelling capacity, more controlled allantoin (AL) release, and improved mechanical strength. Furthermore, the in-vivo results demonstrated that the proposed skin scaffold exhibited satisfactory biocompatibility and supported cell viability during wound healing in Wistar rats, highlighting its potential for clinical applications.

Naturally derived highly resilient and adhesive hydrogels with application as surgical adhesive

The inadequacy of conventional surgical techniques for wound closure and repair in soft and resilient tissues may lead to poor healing outcomes such as local tissue fibrosis and contracture. Therefore, the development of adhesive and resilient hydrogels that can adhere firmly to irregular and dynamic wound interfaces and provide a "tension-free proximity" environment for tissue regeneration has become extremely important. Herein, we describe an integrated modeling-experiment-application strategy for engineering a promising hydrogel-based bioadhesive based on recombinant human collagen (RHC) and catechol-modified hyaluronic acid (HA-Cat). Molecular modeling and simulations were used to verify and explore the hypothesis that RHC and HA-Cat can form an assembly complex through physical interactions. The complex was synergistically crosslinked via a catechol/o-quinone coupling reaction and a carbodiimide coupling reactions, resulting in superior hydrogels with strong adhesion and resilience properties. The application of this bioadhesive to tissue adhesion and wound sealing in vivo was successfully demonstrated, with an optimum collagen index, epidermal thickness, and lowest scar width. Furthermore, subcutaneous implantation demonstrated that the bioadhesive exhibited good biocompatibility and degradability. This newly developed hydrogel may be a highly promising surgical adhesive for medical applications, including wound closure and repair.

Photo-cross-linked Hydrogels for Cartilage and Osteochondral Repair

Photo-cross-linked hydrogels, which respond to light and induce structural or morphological transitions, form a microenvironment that mimics the extracellular matrix of native tissue. In the last decades, photo-cross-linked hydrogels have been widely used in cartilage and osteochondral tissue engineering due to their good biocompatibility, ease of fabrication, rapid in situ gel-forming ability, and tunable mechanical and degradable properties. In this review, we systemically summarize the different types and physicochemical properties of photo-cross-linked hydrogels (including the materials and photoinitiators) and explore the biological properties modulated through the incorporation of additives, including cells, biomolecules, genes, and nanomaterials, into photo-cross-linked hydrogels. Subsequently, we compile the applications of photo-cross-linked hydrogels with a specific focus on cartilage and osteochondral repair. Finally, current limitations and future perspectives of photo-cross-linked hydrogels are also discussed.

Emerging Technology of Nanofiber-Composite Hydrogels for Biomedical Applications

Hydrogels and nanofibers have been firmly established as go-to materials for various biomedical applications. They have been mostly utilized separately, rarely together, because of their distinctive attributes and shortcomings. However, the potential benefits of integrating nanofibers with hydrogels to synergistically combine their functionalities while attenuating their drawbacks are increasingly recognized. Compared to other nanocomposite materials, incorporating nanofibers into hydrogel has the distinct advantage of emulating the hierarchical structure of natural extracellular environment needed for cell and tissue culture. The most important technological aspect of developing "nanofiber-composite hydrogel" is generating nanofibers made of various polymers that are cross-linked and short enough to maintain stable dispersion in hydrated environment. In this review, recent research efforts to develop nanofiber-composite hydrogels are presented, with added emphasis on nanofiber processing techniques. Several notable examples of implementing nanofiber-composite hydrogels for biomedical applications are also introduced.