Calvarial Versus Long Bone: Implications for Tailoring Skeletal Tissue Engineering

Using portable X-ray fluorescence elemental analysis to explore porous skeletal lesions: Interplay of sex, age at death, and cause of death

OBJECTIVES

Search for possible associations between bone elemental concentration and the presence of porous skeletal lesions (PSLs), considering the sex, age, and cause of death (COD) of the individuals.

MATERIALS AND METHODS

The sample comprised 107 non-adult individuals (56 females, 51 males) aged 0-20 (x̄ = 13.2, SD = 5.8) from the Coimbra and Lisbon Identified Skeletal Collections. Cribra cranii, orbitalia, humeralis, and femoralis were recorded as present/absent, and elemental concentrations were assessed by portable x-ray fluorescence (pXRF). A multivariate statistical approach was applied.

RESULTS

Well-preserved skeletons with minimal diagenesis showed no sex-related elemental variations or PSL associations. In contrast, age-at-death correlated with elevated Ca, P, Sr, and Pb levels. Cribra cranii increased with age while other cribra declined post-adolescence. Higher concentrations of Fe and lower of S were linked to cribra cranii. Respiratory infections as COD increased the odds of expressing cribra femoralis (OR = 5.25, CI = 1.25-15.14), cribra cranii (OR = 2.91, CI = 0.97-8.69), and cribra orbitalia (OR = 2.76, CI = 1.06-7.24).

DISCUSSION

Feasible pXRF results and low cribra intraobserver error assure replicability. Elevated Ca, P, and Sr in older individuals may relate to skeletal growth, while increased Pb suggests bioaccumulation. Cribra's increase with age reflects different rates of marrow conversion and bone remodeling. Higher Fe and lower S in individuals with cribra cranii possibly reflects poor nutrition, early alcohol use, and sideroblastic anemia, aligning with 19th-20th-century Portugal's living conditions. Respiratory infections increased cribra expression, revealing intricate interplays among inflammation, anemia(s), marrow expansion, and diet. This research highlights a complex scenario and blazes a new path for cribra interpretation.

An Intact Periosteum is Required for Recombinant Human Jagged1 Guided Bone Regeneration in Calvaria Critical-size Defect Healing

The need to promote calvaria bone healing as a consequence of injury or craniotomy is a major clinical issue. Previous reports tested recombinant human Jagged1 (rhJagged1) treatment for critical-size calvaria defects in the absence of periosteum, and this resulted in significant new bone formation. As the periosteum contributes to healing by serving as a source of progenitor cells, the present study aimed to examine whether significantly more bone is formed when the periosteum is intact for using rhJagged1 to treat critical-size parietal bone defects in mice. Fifteen healthy adult mice, 34 to 65 weeks of age, 26.9 to 48.2 g, were divided into different groups that compared the critical-size defects treated with either phosphate-buffered saline or rhJagged1 protein in either the presence or absence of periosteum. The results indicated that more bone was formed in the presence of periosteum when rhJagged1 is delivered [35% bone volume per tissue volume (BV/TV); P = 0.02] relative to nonperiosteum. Recombinant human Jagged1 protein delivered in the absence of periosteum had the next most new bone formed (25% BV/TV). Defects with phosphate-buffered saline delivered in the absence or presence of periosteum had the least new bone formed (15% and 18% BV/TV, respectively; P = 0.48). The results also show that rhJagged1 does not form ectopic or hypertrophic bone. The usage of rhJagged1 to treat critical-size defects in calvaria is promising clinically, but to maximize clinical efficacy it will require that the periosteum be intact on the noninjured portions of calvaria.

Biomaterials for Regenerative Cranioplasty: Current State of Clinical Application and Future Challenges

Acquired cranial defects are a prevalent condition in neurosurgery and call for cranioplasty, where the missing or defective cranium is replaced by an implant. Nevertheless, the biomaterials in current clinical applications are hardly exempt from long-term safety and comfort concerns. An appealing solution is regenerative cranioplasty, where biomaterials with/without cells and bioactive molecules are applied to induce the regeneration of the cranium and ultimately repair the cranial defects. This review examines the current state of research, development, and translational application of regenerative cranioplasty biomaterials and discusses the efforts required in future research. The first section briefly introduced the regenerative capacity of the cranium, including the spontaneous bone regeneration bioactivities and the presence of pluripotent skeletal stem cells in the cranial suture. Then, three major types of biomaterials for regenerative cranioplasty, namely the calcium phosphate/titanium (CaP/Ti) composites, mineralised collagen, and 3D-printed polycaprolactone (PCL) composites, are reviewed for their composition, material properties, and findings from clinical trials. The third part discusses perspectives on future research and development of regenerative cranioplasty biomaterials, with a considerable portion based on issues identified in clinical trials. This review aims to facilitate the development of biomaterials that ultimately contribute to a safer and more effective healing of cranial defects.

Comprehensive repair of the alveolar cleft using cortical and cancellous bone layers: A retrospective study

To retrospectively review the clinical effect of comprehensive treatment of alveolar cleft (CTAC) using the mandible as the bone source. Patients with alveolar clefts who met the inclusion criteria were subjected to a CTAC protocol that included the following: (1) preoperative orthodontic treatment for creating good soft-tissue conditions; (2) 'area-like grafting' with subperiosteal osteogenic chin bone instead of cartilaginous osteogenic iliac bone; (3) simulation of normal bone anatomy via a sandwich-like bone graft consisting of 'cortical bone + cancellous bone + cortical bone'; and (4) strong internal fixation to ensure initial bone block stability. At 6 months postoperatively, the titanium plate was removed and cone-beam computed tomography was performed to evaluate the surgical results. A total of 54 patients underwent treatment with the CTAC protocol. The average age at the initial operation was 10.3 ± 2.1 years, and the average hospital stay was 2.8 ± 0.6 days. At 6 months postoperatively, 49 patients (90.7%) showed good clinical results. The transplanted bone block formed a 'cortical bone + cancellous bone + cortical bone' structure similar to that of the normal jawbone. A mature bone bridge formed, and the impacted permanent teeth continued to erupt and enter the bone graft area. CTAC is a comprehensive restorative solution for alveolar cleft repair that integrates multiple concepts, including orthodontics, embryology, anatomy, and improvements to surgical methods. The method is easy to perform, causes little surgical trauma, and shows a stable success rate, and is thus worth promoting.

3D printed polylactic acid-based nanocomposite scaffold stuffed with microporous simvastatin-loaded polyelectrolyte for craniofacial reconstruction

Critical sized craniofacial defects are among the most challenging bone defects to repair, due to the anatomical complexity and aesthetic importance. In this study, a polylactic acid/hardystonite-graphene oxide (PLA/HTGO) scaffold was fabricated through 3D printing. In order to upgrade the 3D printed scaffold to a highly porous scaffold, its channels were filled with pectin-quaternized chitosan (Pec-QCs) polyelectrolyte solution containing 0 or 20 mg/mL of simvastatin (Sim) and then freeze-dried. These scaffolds were named FD and FD-Sim, respectively. Also, similar PLA/HTGO scaffolds were prepared and dip coated with Pec-QCs solution containing 0 or 20 mg/mL of Sim and were named DC and DC-Sim, respectively. The formation of macro/microporous structure was confirmed by morphological investigations. The release of Sim from DC-Sim and FD-Sim scaffolds after 28 days was measured as 77.40 ± 5.25 and 86.02 ± 3.63 %, respectively. Cytocompatibility assessments showed that MG-63 cells had the highest proliferation, attachment and spread on the Sim containing scaffolds, especially FD-Sim. In vivo studies on a rat calvarial defect model revealed that an almost complete recovery occurred in the group treated with FD-Sim scaffold after 8 weeks and the defect was filled with newly formed bone. The results of this study acknowledge that the FD-Sim scaffold can be a perfect candidate for calvarial defect repair.

Advances in reparative materials for infectious bone defects and their applications in maxillofacial regions

Infectious bone defects are characterized by the partial loss or destruction of bone tissue resulting from bacterial contaminations subsequent to diseases or external injuries. Traditional bone transplantation and clinical methods are insufficient in meeting the treatment demands for such diseases. As a result, researchers have increasingly focused on the development of more sophisticated biomaterials for improved therapeutic outcomes in recent years. This review endeavors to investigate specific reparative materials utilized for the treatment of infectious bone defects, particularly those present in the maxillofacial region, with a focus on biomaterials capable of releasing therapeutic substances, functional contact biomaterials, and novel physical therapy materials. These biomaterials operate via heightened antibacterial or osteogenic properties in order to eliminate bacteria and/or stimulate bone cells regeneration in the defect, ultimately fostering the reconstitution of maxillofacial bone tissue. Based upon some successful applications of new concept materials in bone repair of other parts, we also explore their future prospects and potential uses in maxillofacial bone repair later in this review. We highlight that the exploration of advanced biomaterials holds promise in establishing a solid foundation for the development of more biocompatible, effective, and personalized treatments for reconstructing infectious maxillofacial defects.

[Oral mesenchymal cells, a specific niche, from development to regeneration]

Oral buccal tissues, including bone and mucosa, have unique properties. Oral mucosal fibroblasts and jaw osteoblasts, both derived from Cranial Neural Crest cells, play a key role in healing and repair. These cells express a specific repertoire of genes with their regenerative properties, but also craniofacial diseases. Understanding these tissues holds clinical promise for tissue regeneration and repair of bone and mucosal defects. These multidisciplinary advances also offer potential for better management of periodontal-related conditions and improved oral health.

Effect of the pulsed electromagnetic field in the repair of a calvaria critical bone defect in rats: cone beam computed tomographic and histomorphometric analysis.: PEMF in the repair of a calvaria critical bone defect: CBCT analyses

INTRODUCTION

The present study evaluated the effect of two protocols of Pulsed Electromagnetic Field (PEMF) therapy on bone neoformation on calvaria critical defects in rats.

MATERIAL & METHODS

96 rats were randomly divided into 3 groups: Control Group (CG; n=32); Test Group - PEMF 1 hour (TG1h; n=32) and Test Group - PEMF 3 hour (TG3h; n=32). A Critical-size Bone Defect (CSD) was surgically created in the calvaria of rats. The animals in the test groups were exposure to PEMF for 5 days a week. The animals were euthanized at 14, 21, 45 and 60 days. The specimens were processed for volume and texture (TAn) analysis, by Cone Beam Computed Tomography (CBCT) and histomorphometric analysis, RESULTS: Histomorphometric and volume analyses revealed that there was no statistically significant difference in the repair of bone defects between groups receiving PEMF therapy and CG. TAn revealed a statistically significant difference between the groups only for the entropy parameter, in which TG1h group presented a higher value compared to CG on 21 days. TG1h and TG3h did not accelerate bone repair in calvarial critical size defect and the parameters of PEMF should be considered.

DISCUSSION

This study showed that PEMF application on CSD in rats does not accelerate bone repair. Although literature showed a positive association in biostimulation on bone tissue with the parameters applied, studies with other PEMF parameters are essential to verify improving this study design.

Nano artificial periosteum PCL/Ta/ZnO accelerates repair of periosteum via antibacterial, promoting vascularization and osteogenesis

The periosteum plays a critical role in bone development, shaping, remodeling, and fracture healing due to its abundance of osteoprogenitor cells, osteoblasts, and capillary network. However, the role of periosteum in bone injury healing has been underestimated, thus there is an urgent need to develop a multifunctional artificial periosteum that mimics the natural one. To tackle this issue, electrospinning technology was employed to fabricate an artificial periosteum composed of Poly-ε-caprolactone (PCL) doped with tantalum (Ta) and zinc oxide (ZnO) nanoparticles to enhance its antibacterial, osteogenic, and angiogenic properties. The in vitro cell experiments have demonstrated that the PCL/Ta/ZnO artificial periosteum exhibits excellent biocompatibility and can effectively facilitate osteogenic differentiation of BMSCs as well as angiogenic differentiation of EPCs. Antibacterial experiments have demonstrated the excellent bactericidal effects of PCL/Ta/ZnO artificial periosteum against both S. aureus and E. coli. The subcutaneous infection and critical-sized skull bone defect models have validated its in vivo properties of antibacterial activity, promotion of osteogenesis, and angiogenic potential. The PCL/Ta/ZnO artificial periosteum demonstrates remarkable efficacy in infection control and favorable immunomodulation, thereby achieving rapid vascularized bone repair. In conclusion, the utilization of PCL/Ta/ZnO tissue-engineered periosteum has been demonstrated to exhibit antibacterial properties, pro-vascularization effects, and promotion of osteogenesis at the site of bone defects. This promising approach could potentially offer effective treatment for bone defects.

3D-Printed Flat-Bone-Mimetic Bioceramic Scaffolds for Cranial Restoration

The limitations of autologous bone grafts necessitate the development of advanced biomimetic biomaterials for efficient cranial defect restoration. The cranial bones are typical flat bones with sandwich structures, consisting of a diploe in the middle region and 2 outer compact tables. In this study, we originally developed 2 types of flat-bone-mimetic β-tricalcium phosphate bioceramic scaffolds (Gyr-Comp and Gyr-Tub) by high-precision vat-photopolymerization-based 3-dimensional printing. Both scaffolds had 2 outer layers and an inner layer with gyroid pores mimicking the diploe structure. The outer layers of Gyr-Comp scaffolds simulated the low porosity of outer tables, while those of Gyr-Tub scaffolds mimicked the tubular pore structure in the tables of flat bones. The Gyr-Comp and Gyr-Tub scaffolds possessed higher compressive strength and noticeably promoted in vitro cell proliferation, osteogenic differentiation, and angiogenic activities compared with conventional scaffolds with cross-hatch structures. After implantation into rabbit cranial defects for 12 weeks, Gyr-Tub achieved the best repairing effects by accelerating the generation of bone tissues and blood vessels. This work provides an advanced strategy to prepare biomimetic biomaterials that fit the structural and functional needs of efficacious bone regeneration.

Application of mesenchymal stem cell sheet for regeneration of craniomaxillofacial bone defects

Bone defects are among the most common damages in human medicine. Due to limitations and challenges in the area of bone healing, the research field has turned into a hot topic discipline with direct clinical outcomes. Among several available modalities, scaffold-free cell sheet technology has opened novel avenues to yield efficient osteogenesis. It is suggested that the intact matrix secreted from cells can provide a unique microenvironment for the acceleration of osteoangiogenesis. To the best of our knowledge, cell sheet technology (CST) has been investigated in terms of several skeletal defects with promising outcomes. Here, we highlighted some recent advances associated with the application of CST for the recovery of craniomaxillofacial (CMF) in various preclinical settings. The regenerative properties of both single-layer and multilayer CST were assessed regarding fabrication methods and applications. It has been indicated that different forms of cell sheets are available for CMF engineering like those used for other hard tissues. By tackling current challenges, CST is touted as an effective and alternative therapeutic option for CMF bone regeneration.

Split dCas12a activator for lncRNA H19 activation to enhance BMSC differentiation and promote calvarial bone healing

Healing of large calvarial bone defects in adults is challenging. We previously showed that inducing chondrogenic differentiation of mesenchymal stem cells from bone marrow (BMSC) or adipose tissue (ASC) before implantation can switch the repair pathway and improve calvarial bone healing. Split dCas12a activator is a new CRISPR activation system comprising the amino (N) and carboxyl (C) fragments of dCas12a protein, each being fused with synthetic transcription activators at both termini. The split dCas12a activator was shown to induce programmable gene expression in cell lines. Here we exploited the split dCas12a activator to activate the expression of chondroinductive long non-coding RNA H19. We showed that co-expression of the split N- and C-fragments resulted in spontaneous dimerization, which elicited stronger activation of H19 than full-length dCas12a activator in rat BMSC and ASC. We further packaged the entire split dCas12a activator system (13.2 kb) into a hybrid baculovirus vector, which enhanced and prolonged H19 activation for at least 14 days in BMSC and ASC. The extended H19 activation elicited potent chondrogenic differentiation and inhibited adipogenesis. Consequently, the engineered BMSC promoted in vitro cartilage formation and augmented calvarial bone healing in rats. These data implicated the potentials of the split dCas12a activator for stem cell engineering and regenerative medicine.

Differential regulation of skeletal stem/progenitor cells in distinct skeletal compartments

Skeletal stem/progenitor cells (SSPCs), characterized by self-renewal and multipotency, are essential for skeletal development, bone remodeling, and bone repair. These cells have traditionally been known to reside within the bone marrow, but recent studies have identified the presence of distinct SSPC populations in other skeletal compartments such as the growth plate, periosteum, and calvarial sutures. Differences in the cellular and matrix environment of distinct SSPC populations are believed to regulate their stemness and to direct their roles at different stages of development, homeostasis, and regeneration; differences in embryonic origin and adjacent tissue structures also affect SSPC regulation. As these SSPC niches are dynamic and highly specialized, changes under stress conditions and with aging can alter the cellular composition and molecular mechanisms in place, contributing to the dysregulation of local SSPCs and their activity in bone regeneration. Therefore, a better understanding of the different regulatory mechanisms for the distinct SSPCs in each skeletal compartment, and in different conditions, could provide answers to the existing knowledge gap and the impetus for realizing their potential in this biological and medical space. Here, we summarize the current scientific advances made in the study of the differential regulation pathways for distinct SSPCs in different bone compartments. We also discuss the physical, biological, and molecular factors that affect each skeletal compartment niche. Lastly, we look into how aging influences the regenerative capacity of SSPCs. Understanding these regulatory differences can open new avenues for the discovery of novel treatment approaches for calvarial or long bone repair.

Rabbit calvarial and mandibular critical-sized bone defects as an experimental model for the evaluation of craniofacial bone tissue regeneration

INTRODUCTION

Many studies have aimed to investigate the regeneration potential of bone substitutes through animal models at different defect sites, where the bone healing mechanism varies due to developmental, structural and functional differences. This study aims to develop a rabbit model with two functionally different (non-load-bearing calvarias and load-bearing mandibular) critical-sized defects (CSD) in one rabbit.

MATERIAL & METHOD

The comparison of the "gold standard" autograft to a sham (no graft) control was undertaken in order to validate this model; at the same time, a 3D-printed biphasic calcium phosphate scaffold was implanted to test its utility in the evaluation of new bone substitute materials. Twenty rabbits were selected with both a 10 mm calvaria defect and a 11 mm bicortical semi-cylindrical mandibular defect. The animals were euthanized at 4 and 12 weeks once surgery, microcomputed tomography and histological analysis had been performed.

RESULTS

In the case of the calvaria, the results for the non-healing sham group compared with the healing of those that had undergone the autograft validated the CSD model. But the mandibular defect was not validated, due to the particularity of mandible high mechanical stress and infectious risk.

DISCUSSION

This study showed for the first time that rabbits have a high tolerance for the bilateral double-site CSD model under consideration; and further studies are essential to modify and improve the design of mandibular CSD.

Type II collagen-positive progenitors are important stem cells in controlling skeletal development and vascular formation

Type II collagen-positive (Col2+) cells have been reported as skeletal stem cells (SSCs), but the contribution of Col2+ progenitors to skeletal development both prenatally and postnatally during aging remains unclear. To address this question, we generated new mouse models with ablation of Col2+ cells at either the embryonic or postnatal stages. The embryonic ablation of Col2+ progenitors resulted in the death of newborn mice due to a decrease in skeletal blood vessels, loss of all vertebral bones and absence of most other bones except part of the craniofacial bone, the clavicle bone and a small piece of the long bone and ribs, which suggested that intramembranous ossification is involved in long bone development but does not participate in spine development. The postnatal ablation of Col2+ cells resulted in mouse growth retardation and a collagenopathy phenotype. Lineage tracing experiments with embryonic or postnatal mice revealed that Col2+ progenitors occurred predominantly in the growth plate (GP) and articular cartilage, but a limited number of Col2+ cells were detected in the bone marrow. Moreover, the number and differentiation ability of Col2+ progenitors in the long bone and knee joints decreased with increasing age. The fate-mapping study further revealed Col2+ lineage cells contributed to, in addition to osteoblasts and chondrocytes, CD31+ blood vessels in both the calvarial bone and long bone. Specifically, almost all blood vessels in calvarial bone and 25.4% of blood vessels in long bone were Col2+ lineage cells. However, during fracture healing, 95.5% of CD31+ blood vessels in long bone were Col2+ lineage cells. In vitro studies further confirmed that Col2+ progenitors from calvarial bone and GP could form CD31+ vascular lumens. Thus, this study provides the first demonstration that intramembranous ossification is involved in long bone and rib development but not spine development. Col2+ progenitors contribute to CD31+ skeletal blood vessel formation, but the percentage differs between long bone and skull bone. The number and differentiation ability of Col2+ progenitors decreases with increasing age.

A hierarchical vascularized engineered bone inspired by intramembranous ossification for mandibular regeneration

Mandibular defects caused by injuries, tumors, and infections are common and can severely affect mandibular function and the patient’s appearance. However, mandible reconstruction with a mandibular bionic structure remains challenging. Inspired by the process of intramembranous ossification in mandibular development, a hierarchical vascularized engineered bone consisting of angiogenesis and osteogenesis modules has been produced. Moreover, the hierarchical vascular network and bone structure generated by these hierarchical vascularized engineered bone modules match the particular anatomical structure of the mandible. The ultra-tough polyion complex has been used as the basic scaffold for hierarchical vascularized engineered bone for ensuring better reconstruction of mandible function. According to the results of in vivo experiments, the bone regenerated using hierarchical vascularized engineered bone is similar to the natural mandibular bone in terms of morphology and genomics. The sonic hedgehog signaling pathway is specifically activated in hierarchical vascularized engineered bone, indicating that the new bone in hierarchical vascularized engineered bone underwent a process of intramembranous ossification identical to that of mandible development. Thus, hierarchical vascularized engineered bone has a high potential for clinical application in mandibular defect reconstruction. Moreover, the concept based on developmental processes and bionic structures provides an effective strategy for tissue regeneration.

Mechanisms of dermal bone repair after predatory attack in the giant stem-group teleost Leedsichthys problematicus Woodward, 1889a (Pachycormiformes)

Leedsichthys problematicus is a suspension-feeding member of the Mesozoic clade Pachycormiformes (stem-group Teleostei), and the largest known ray-finned fish (Actinopterygii). As in some larger fish, the skeleton is poorly ossified, but the caudal fin (tail) is well-preserved. Bony calluses have been found here, on the dermal fin rays, and when sectioned, show evidence of bone repair in response to damage. As part of this repair, distinctive tissue changes are observed, including the deposition of woven bone onto broken bone fragments and the surface of the lepidotrichium, after resorption of the edges of these fragments and the lepidotrichial surface itself. Within the woven bone are many clear elongate spaces, consistent with their interpretation as bundles of unmineralized collagen (Sharpey's fibres). These normally provide attachment within dermal bones, and here attach new bone to old, particularly to resorbed surfaces, identified by scalloped reversal lines. Haversian systems are retained in the old bone, from which vasculature initially invaded the callus, hence bringing stem cells committed to forming bone onto the surfaces of the damaged area. These observations provide strong evidence of a vital response through survival of a predatory attack by a large marine reptile, coeval with Leedsichthys in the Jurassic seas.

The Osteoinductivity of Calcium Phosphate-Based Biomaterials: A Tight Interaction With Bone Healing

Calcium phosphate (CaP)-based bioceramics are the most widely used synthetic biomaterials for reconstructing damaged bone. Accompanied by bone healing process, implanted materials are gradually degraded while bone ultimately returns to its original geometry and function. In this progress report, we reviewed the complex and tight relationship between the bone healing response and CaP-based biomaterials, with the emphasis on the in vivo degradation mechanisms of such material and their osteoinductive properties mediated by immune responses, osteoclastogenesis and osteoblasts. A deep understanding of the interaction between biological healing process and biomaterials will optimize the design of CaP-based biomaterials, and further translate into effective strategies for biomaterials customization.

Novel Techniques and Future Perspective for Investigating Critical-Size Bone Defects

A critical-size bone defect is a challenging clinical problem in which a gap between bone ends will not heal and will become a nonunion. The current treatment is to harvest and transplant an autologous bone graft to facilitate bone bridging. To develop less invasive but equally effective treatment options, one needs to first have a comprehensive understanding of the bone healing process. Therefore, it is imperative to leverage the most advanced technologies to elucidate the fundamental concepts of the bone healing process and develop innovative therapeutic strategies to bridge the nonunion gap. In this review, we first discuss the current animal models to study critical-size bone defects. Then, we focus on four novel analytic techniques and discuss their strengths and limitations. These four technologies are mass cytometry (CyTOF) for enhanced cellular analysis, imaging mass cytometry (IMC) for enhanced tissue special imaging, single-cell RNA sequencing (scRNA-seq) for detailed transcriptome analysis, and Luminex assays for comprehensive protein secretome analysis. With this new understanding of the healing of critical-size bone defects, novel methods of diagnosis and treatment will emerge.

Bilateral double site (calvarial and mandibular) critical-size bone defect model in rabbits for evaluation of a craniofacial tissue engineering constructs

Most existing preclinical models for evaluating the biosafety and bone-regeneration efficacy of innovative bone substitute materials (BSMs) or tissue engineering (TE) constructs only consisted of a single-site defect and the anatomical locations of defect varied drastically. While the compelling evidence showed that the bone healing pattern is location-dependent, owing to developmental, structural, and functional differences of anatomical locations, this is particularly true for the craniofacial region. Taking this into account, the bone healing efficiency of a BSM shown at one anatomical defect location cannot ensure the same impact at another. This prompted us to develop, for the first time, a model of bilateral critical-sized defect (CSD) at two distinctly different locations (non-load-bearing parietal calvaria and load-bearing mandibular body) co-existing in one rabbit to reduce the number of animals needed and avoid the influence of interindividual variability and evaluation bias on comparisons.

24 healthy adult male New Zealand White rabbits were randomly assigned to a group, either control, autograft (considered the “gold standard”) or a clinically relevant BSM (biphasic calcium phosphate granules) (BCPg, Mastergraft®, Medronics). The full-thickness cylindrical calvarial defect (ø10 mm) on frontoparietal region and mandibular composite defect (ø11 mm) on the body of the mandible were created bilaterally using low-speed drilling with saline irrigation. The defect on one side was filled with autograft debris or BCPg, and the other side was no graft (empty). Following the euthanasia of animals at the predetermined intervals (4w and 12w), the defect zones were examined macroscopically and then sampled and processed for microcomputed tomography (microCT) and histological analysis.

All surgeries went uneventfully, and all rabbits recovered slowly but steadily. No symptoms of infection or inflammation associated with the defect were observed during the experiment. At 4w and 12w, macroscopic views of all defect sites were clean without any signs of necrosis or abscess, and no intraoral communication was found. The analysis of microCT and histological findings showed the non-healing nature of the empty defect, thereby both calvaria and mandible CSDs can be validated. The study of the application of BCPg in this defect model highlighted good osteointegration and excellent osteoconductive properties but compromised the osteoinductive properties of this material (compared with autograft).

To conclude, this novel double-site CSD model holds great promise in the application for preclinical evaluation of BSMs, TE construct, etc. With a reduced number of animals in use, and lower interindividual variability and evaluation bias for comparisons.

•

A novel rabbit model of bilateral critical-sized defect co-existing at two distinctly different locations was developed.

Combining sclerostin neutralization with tissue engineering: An improved strategy for craniofacial bone repair

Scaffolds associated with different types of mesenchymal stromal stem cells (MSC) are extensively studied for the development of novel therapies for large bone defects. Moreover, monoclonal antibodies have been recently introduced for the treatment of cancer-associated bone loss and other skeletal pathologies. In particular, antibodies against sclerostin, a key player in bone remodeling regulation, have demonstrated a real benefit for treating osteoporosis but their contribution to bone tissue-engineering remains uncharted. Here, we show that combining implantation of dense collagen hydrogels hosting wild-type (WT) murine dental pulp stem cells (mDPSC) with weekly systemic injections of a sclerostin antibody (Scl-Ab) leads to increased bone regeneration within critical size calvarial defects performed in WT mice. Furthermore, we show that bone formation is equivalent in calvarial defects in WT mice implanted with Sost knock-out (KO) mDPSC and in Sost KO mice, suggesting that the implantation of sclerostin-deficient MSC similarly promotes new bone formation than complete sclerostin deficiency. Altogether, our data demonstrate that an antibody-based therapy can potentialize tissue-engineering strategies for large craniofacial bone defects and urges the need to conduct research for antibody-enabled local inhibition of sclerostin. STATEMENT OF SIGNIFICANCE: The use of monoclonal antibodies is nowadays broadly spread for the treatment of several conditions including skeletal bone diseases. However, their use to potentialize tissue engineering constructs for bone repair remains unmet. Here, we demonstrate that the neutralization of sclerostin, through either a systemic inhibition by a monoclonal antibody or the implantation of sclerostin-deficient mesenchymal stromal stem cells (MSC) directly within the defect, improves the outcome of a tissue engineering approach, combining dense collagen hydrogels and MSC derived from the dental pulp, for the treatment of large craniofacial bone defects.

Transcriptional Regulation of Jaw Osteoblasts: Development to Pathology

Craniofacial and jaw bones have unique physiological specificities when compared to axial and appendicular bones. However, the molecular profile of the jaw osteoblast (OB) remains incomplete. The present study aimed to decipher the bone site-specific profiles of transcription factors (TFs) expressed in OBs in vivo. Using RNA sequencing analysis, we mapped the transcriptome of confirmed OBs from 2 different skeletal sites: mandible (Md) and tibia (Tb). The OB transcriptome contains 709 TF genes: 608 are similarly expressed in Md-OB and Tb-OB, referred to as "OB-core"; 54 TF genes are upregulated in Md-OB, referred to as "Md-set"; and 18 TF genes are upregulated in Tb-OB, referred to as "Tb-set." Notably, the expression of 29 additional TF genes depends on their RNA transcript variants. TF genes with no previously known role in OBs and bone were identified. Bioinformatics analysis combined with review of genetic disease databases and a comprehensive literature search showed a significant contribution of anatomical origin to the OB signatures. Md-set and Tb-set are enriched with site-specific TF genes associated with development and morphogenesis (neural crest vs. mesoderm), and this developmental imprint persists during growth and homeostasis. Jaw and tibia site-specific OB signatures are associated with craniofacial and appendicular skeletal disorders as well as neurocristopathies, dental disorders, and digit malformations. The present study demonstrates the feasibility of a new method to isolate pure OB populations and map their gene expression signature in the context of OB physiological environment, avoiding in vitro culture and its associated biases. Our results provide insights into the site-specific developmental pathways governing OBs and identify new major OB regulators of bone physiology. We also established the importance of the OB transcriptome as a prognostic tool for human rare bone diseases to explore the hidden pathophysiology of craniofacial malformations, among the most prevalent congenital defects in humans.

Effect of the combinative use of acupotomy therapy and ultrasonic drug penetration in treating knee joint osteoarthritis

BACKGROUND/INTRODUCTION

Knee joint osteoarthritis is a chronic disease that affects the health in aging population.

AIM

We explore a minimally invasive surgery combining the use of ultrasonic drug penetration to treat early stage of knee joint osteoarthritis.

DESIGN

In total, 75 patients were participated in acupotomy therapy and ultrasonic drug penetration to treat joint osteoarthritis.

METHODS

The WOMAC (the Western Ontario and McMaster Universities Osteoarthritis Index) scores were used to assess the performance.

RESULTS

There was a significant difference in the WOMAC score between the two groups of patients (P < 0.05). The total performance rate was about 86.4% and 50% in experiment and control groups.

CONCLUSION

The combination of acupotomy therapy and ultrasonic drug penetration has demonstrated to be effective and promising to treat knee joint osteoarthritis.

Sustained Delivery of Lactoferrin Using Poloxamer Gels for Local Bone Regeneration in a Rat Calvarial Defect Model

Lactoferrin (LF) is a multifunctional milk glycoprotein that promotes bone regeneration. Local delivery of LF at the bone defect site is a promising approach for enhancement of bone regeneration, but efficient systems for sustained local delivery are still largely missing. The aim of this study was to investigate the potential of the poloxamers for sustained delivery of LF to enhance local bone regeneration. The developed LF/poloxamer formulations were liquid at room temperature (20 °C) transforming to a sustained releasing gel depot at body temperature (37 °C). In vitro release studies demonstrated an initial burst release (~50%), followed by slower release of LF for up to 72 h. Poloxamer, with and without LF, increased osteoblast viability at 72 h (p < 0.05) compared to control, and the immune response from THP-1 cells was mild when compared to the suture material. In rat calvarial defects, the LF/poloxamer group had lower bone volume than the controls (p = 0.0435). No difference was observed in tissue mineral density and lower bone defect coverage scores (p = 0.0267) at 12 weeks after surgery. In conclusion, LF/poloxamer formulations support cell viability and do not induce an unfavourable immune response; however, LF delivery via the current formulation of LF200/poloxamer gel did not demonstrate enhanced bone regeneration and was not compatible with the rat calvarial defect model.

Craniofacial Bone Tissue Engineering: Current Approaches and Potential Therapy

Craniofacial bone defects can result from various disorders, including congenital malformations, tumor resection, infection, severe trauma, and accidents. Successfully regenerating cranial defects is an integral step to restore craniofacial function. However, challenges managing and controlling new bone tissue formation remain. Current advances in tissue engineering and regenerative medicine use innovative techniques to address these challenges. The use of biomaterials, stromal cells, and growth factors have demonstrated promising outcomes in vitro and in vivo. Natural and synthetic bone grafts combined with Mesenchymal Stromal Cells (MSCs) and growth factors have shown encouraging results in regenerating critical-size cranial defects. One of prevalent growth factors is Bone Morphogenetic Protein-2 (BMP-2). BMP-2 is defined as a gold standard growth factor that enhances new bone formation in vitro and in vivo. Recently, emerging evidence suggested that Megakaryocytes (MKs), induced by Thrombopoietin (TPO), show an increase in osteoblast proliferation in vitro and bone mass in vivo. Furthermore, a co-culture study shows mature MKs enhance MSC survival rate while maintaining their phenotype. Therefore, MKs can provide an insight as a potential therapy offering a safe and effective approach to regenerating critical-size cranial defects.

Skin adhesion to the percutaneous component of direct bone anchored systems: systematic review on preclinical approaches and biomaterials

Nowadays, direct bone anchored systems are an increasingly adopted approach in the therapeutic landscape for amputee patients. However, the percutaneous nature of these devices poses a major challenge to obtain a stable and lasting proper adhesion between the implant surface and the skin. A systematic review was carried out in three databases (PubMed, Scopus, Web of Science) to provide an overview of the innovative strategies tested with preclinical models (in vitro and in vivo) in the last ten years to improve the skin adhesion of direct bone anchored systems. Fifty five articles were selected after screening, also employing PECO question and inclusion criteria. A modified Cochrane RoB 2.0 tool for the in vitro studies and the SYRCLE tool for in in vivo studies were used to assess the risk of bias. The evidence collected suggests that the implementation of porous percutaneous structures could be one of the most favorable approach to improve proper skin adhesion, especially in association with bioactive coatings, as hydroxyapatite, and exploiting the field of nanostructure. Some issues still remain open as (a) the identification and characterization of the best material/coating association able to limit the shear stresses at the interface and (b) the role of keratinocyte turnover on the skin/biomaterial adhesion and integration processes.

Fixation of Transparent Bone Pins with Photocuring Biocomposites

Bone fractures are in need of rapid fixation methods, but the current strategies are limited to metal pins and screws, which necessitate secondary surgeries upon removal. New techniques are sought to avoid surgical revisions, while maintaining or improving the fixation speed. Herein, a method of bone fixation is proposed with transparent biopolymers anchored in place via light-activated biocomposites based on expanding CaproGlu bioadhesives. The transparent biopolymers serve as a UV light guide for the activation of CaproGlu biocomposites, which results in evolution of molecular nitrogen (from diazirine photolysis), simultaneously expanding the covalently cross-linked matrix. Osseointegration additives of hydroxyapatite or Bioglass 45S5 yield a biocomposite matrix with increased stiffness and pullout strength. The structure-property relationships of UV joules dose, pin diameter, and biocomposite additives are assessed with respect to the apparent viscosity, shear modulus, spatiotemporal pin curing, and lap-shear adhesion. Finally, a model system is proposed based on ex vivo investigation with bone tissue for the exploration and optimization of UV-active transparent biopolymer fixation.

Site-Specific Fracture Healing: Comparison between Diaphysis and Metaphysis in the Mouse Long Bone

The process of fracture healing varies depending upon internal and external factors, such as the fracture site, mode of injury, and mechanical environment. This review focuses on site-specific fracture healing, particularly diaphyseal and metaphyseal healing in mouse long bones. Diaphyseal fractures heal by forming the periosteal and medullary callus, whereas metaphyseal fractures heal by forming the medullary callus. Bone healing in ovariectomized mice is accompanied by a decrease in the medullary callus formation both in the diaphysis and metaphysis. Administration of estrogen after fracture significantly recovers the decrease in diaphyseal healing but fails to recover the metaphyseal healing. Thus, the two bones show different osteogenic potentials after fracture in ovariectomized mice. This difference may be attributed to the heterogeneity of the skeletal stem cells (SSCs)/osteoblast progenitors of the two bones. The Hox genes that specify the patterning of the mammalian skeleton during embryogenesis are upregulated during the diaphyseal healing. Hox genes positively regulate the differentiation of osteoblasts from SSCs in vitro. During bone grafting, the SSCs in the donor’s bone express Hox with adaptability in the heterologous bone. These novel functions of the Hox genes are discussed herein with reference to the site-specificity of fracture healing.

Engineering Musculoskeletal Grafts for Multi-Tissue Unit Repair: Lessons From Developmental Biology and Wound Healing

In the musculoskeletal system, bone, tendon, and skeletal muscle integrate and act coordinately as a single multi-tissue unit to facilitate body movement. The development, integration, and maturation of these essential components and their response to injury are vital for conferring efficient locomotion. The highly integrated nature of these components is evident under disease conditions, where rotator cuff tears at the bone-tendon interface have been reported to be associated with distal pathological alterations such as skeletal muscle degeneration and bone loss. To successfully treat musculoskeletal injuries and diseases, it is important to gain deep understanding of the development, integration and maturation of these musculoskeletal tissues along with their interfaces as well as the impact of inflammation on musculoskeletal healing and graft integration. This review highlights the current knowledge of developmental biology and wound healing in the bone-tendon-muscle multi-tissue unit and perspectives of what can be learnt from these biological and pathological processes within the context of musculoskeletal tissue engineering and regenerative medicine. Integrating these knowledge and perspectives can serve as guiding principles to inform the development and engineering of musculoskeletal grafts and other tissue engineering strategies to address challenging musculoskeletal injuries and diseases.

The bone anchored prostheses for amputees - Historical development, current status, and future aspects

In the past 50 years, bone anchored prostheses have evolved from a concept for experimental treatment to a rapidly developing area in orthopedics and traumatology. Up to date, there are dozens of centers in the world providing osseointegration amputation reconstructions and more than a thousand patients using the bone anchored prostheses. Compared with conventional socket prostheses, the bone anchored prosthesis by osseointegration avoids the debilitating problems related with soft tissues. It also provides physiological weight bearing, improved range of motion, and sensory feedback, all of which contribute to the improvement on quality of life for amputees. The present article briefly reviews the historical development of osseointegration surgery for amputation reconstruction and the current challenges. The implant design characters and surgical techniques of the two types of implants; the screw-type implant (presented by the OPRA system), and the press-fit implants (presented by EEP and OPL systems) are described. The major complications, infections and mechanical failures, are discussed in detail based on the latest evidence. Future aspects and experimental trials aiming to overcome the current challenges are presented.

Kindlin-2 mediates mechanotransduction in bone by regulating expression of Sclerostin in osteocytes

Osteocytes act as mechanosensors in bone; however, the underlying mechanism remains poorly understood. Here we report that deleting Kindlin-2 in osteocytes causes severe osteopenia and mechanical property defects in weight-bearing long bones, but not in non-weight-bearing calvariae. Kindlin-2 loss in osteocytes impairs skeletal responses to mechanical stimulation in long bones. Control and cKO mice display similar bone loss induced by unloading. However, unlike control mice, cKO mice fail to restore lost bone after reloading. Osteocyte Kindlin-2 deletion impairs focal adhesion (FA) formation, cytoskeleton organization and cell orientation in vitro and in bone. Fluid shear stress dose-dependently increases Kindlin-2 expression and decreases that of Sclerostin by downregulating Smad2/3 in osteocytes; this latter response is abolished by Kindlin-2 ablation. Kindlin-2-deficient osteocytes express abundant Sclerostin, contributing to bone loss in cKO mice. Collectively, we demonstrate an indispensable novel role of Kindlin-2 in maintaining skeletal responses to mechanical stimulation by inhibiting Sclerostin expression during osteocyte mechanotransduction.

In vivo bone regeneration assessment of offset and gradient melt electrowritten (MEW) PCL scaffolds

BACKGROUND

Biomaterial-based bone tissue engineering represents a promising solution to overcome reduced residual bone volume. It has been previously demonstrated that gradient and offset architectures of three-dimensional melt electrowritten poly-caprolactone (PCL) scaffolds could successfully direct osteoblast cells differentiation toward an osteogenic lineage, resulting in mineralization. The aim of this study was therefore to evaluate the in vivo osteoconductive capacity of PCL scaffolds with these different architectures.

METHODS

Five different calcium phosphate (CaP) coated melt electrowritten PCL pore sized scaffolds: 250 μm and 500 μm, 500 μm with 50% fibre offset (offset.50.50), tri layer gradient 250-500-750 μm (grad.250top) and 750-500-250 μm (grad.750top) were implanted into rodent critical-sized calvarial defects. Empty defects were used as a control. After 4 and 8 weeks of healing, the new bone was assessed by micro-computed tomography and immunohistochemistry.

RESULTS

Significantly more newly formed bone was shown in the grad.250top scaffold 8 weeks post-implantation. Histological investigation also showed that soft tissue was replaced with newly formed bone and fully covered the grad.250top scaffold. While, the bone healing did not happen completely in the 250 μm, offset.50.50 scaffolds and blank calvaria defects following 8 weeks of implantation. Immunohistochemical analysis showed the expression of osteogenic markers was present in all scaffold groups at both time points. The mineralization marker Osteocalcin was detected with the highest intensity in the grad.250top and 500 μm scaffolds. Moreover, the expression of the endothelial markers showed that robust angiogenesis was involved in the repair process.

CONCLUSIONS

These results suggest that the gradient pore size structure provides superior conditions for bone regeneration.

Spatial Distributions, Characteristics, and Applications of Craniofacial Stem Cells

Stem cells play an irreplaceable role in the development, homeostasis, and regeneration of the craniofacial bone. Multiple populations of tissue-resident craniofacial skeletal stem cells have been identified in different stem cell niches, including the cranial periosteum, jawbone marrow, temporomandibular joint, cranial sutures, and periodontium. These cells exhibit self-renewal and multidirectional differentiation abilities. Here, we summarized the properties of craniofacial skeletal stem cells, based on their spatial distribution. Specifically, we focused on the in vivo genetic fate mapping of stem cells, by exploring specific stem cell markers and observing their lineage commitment in both the homeostatic and regenerative states. Finally, we discussed their application in regenerative medicine.

Performance of Double-Arm Digital Subtraction Angiography (DSA)-Guided and C-Arm-Guided Percutaneous Kyphoplasty (PKP) to Treat Senile Osteoporotic Vertebral Compression Fractures

Background

Osteoporotic vertebral compression fracture (OVCF) is a common fracture in the elderly. Conservative treatment requires prolonged bedding, which may lead to serious complications. To explore optimized use of percutaneous kyphoplasty (PKP) in the treatment of senile osteoporotic thoracolumbar vertebral compression fractures, in this study, we used C-arm-guided and double-arm digital subtraction angiography (DSA)-guided PKP to treat OVCF in elderly patients and analyzed the effective recovery.

Material/Methods

In all, 60 patients who presented with osteoporotic vertebral compression fractures at our hospital between July 2017 and February 2019 were analyzed. They were randomly divided into C-arm-guided group and the double-arm DSA-guided groups. Both groups were treated with percutaneous kyphoplasty.

Results

A pain VAS score analysis revealed that there was no significant difference between the two groups before surgery (P>0.05). After surgery, the VAS scores showed a significant difference between the C-arm-guided group and the double-arm DSA-guided PKP treatment group (P<0.01). Moreover, with respect to the bone cement dosage, vertebral correction height, operation time, cumulative radiation dose, percolation rate, and volume of bone cement, the double-arm DSA-guided PKP treatment showed significantly better results than the C-arm-guided PKP treatment (P<0.01).

Conclusions

Our data revealed that double-arm DSA-guided PKP was more accurate in treatment of senile osteoporotic thoracolumbar vertebral compression fractures, producing excellent performance with more accurate intraoperative evaluation, shorter operative time, lower incidence of bone cement leakage, less intraoperative radiation dose, and higher safety, and thus, could be extensively applied to clinical surgery.

Interleukin-4 overexpressing mesenchymal stem cells within gelatin-based microribbon hydrogels enhance bone healing in a murine long bone critical-size defect model

Mesenchymal stem cell (MSC)-based therapy is a promising strategy for bone repair. Furthermore, the innate immune system, and specifically macrophages, plays a crucial role in the differentiation and activation of MSCs. The anti-inflammatory cytokine Interleukin-4 (IL-4) converts pro-inflammatory M1 macrophages into a tissue regenerative M2 phenotype, which enhances MSC differentiation and function. We developed lentivirus-transduced IL-4 overexpressing MSCs (IL-4 MSCs) that continuously produce IL-4 and polarize macrophages toward an M2 phenotype. In the current study, we investigated the potential of IL-4 MSCs delivered using a macroporous gelatin-based microribbon (μRB) scaffold for healing of critical-size long bone defects in Mice. IL-4 MSCs within μRBs enhanced M2 marker expression without inhibiting M1 marker expression in the early phase, and increased macrophage migration into the scaffold. Six weeks after establishing the bone defect, IL-4 MSCs within μRBs enhanced bone formation and helped bridge the long bone defect. IL-4 MSCs delivered using macroporous μRB scaffold is potentially a valuable strategy for the treatment of critical-size long bone defects.