Bone Morphogenetic Protein-2 Adsorption onto Poly-ɛ-caprolactone Better Preserves Bioactivity In Vitro and Produces More Bone In Vivo than Conjugation Under Clinically Relevant Loading Scenarios

Effect of 3D-printed polycaprolactone/osteolectin scaffolds on the odontogenic differentiation of human dental pulp cells

Cell-based tissue engineering often requires the use of scaffolds to provide a three-dimensional (3D) framework for cell proliferation and tissue formation. Polycaprolactone (PCL), a type of polymer, has good printability, favorable surface modifiability, adaptability, and biodegradability. However, its large-scale applicability is hindered by its hydrophobic nature, which affects biological properties. Composite materials can be created by adding bioactive materials to the polymer to improve the properties of PCL scaffolds. Osteolectin is an odontogenic factor that promotes the maintenance of the adult skeleton by promoting the differentiation of LepR+ cells into osteoblasts. Therefore, the aim of this study was to evaluate whether 3D-printed PCL/osteolectin scaffolds supply a suitable microenvironment for the odontogenic differentiation of human dental pulp cells (hDPCs). The hDPCs were cultured on 3D-printed PCL scaffolds with or without pores. Cell attachment and cell proliferation were evaluated using EZ-Cytox. The odontogenic differentiation of hDPCs was evaluated by alizarin red S staining and alkaline phosphatase assays. Western blot was used to evaluate the expression of the proteins DSPP and DMP-Results: The attachment of hDPCs to PCL scaffolds with pores was significantly higher than to PCL scaffolds without pores. The odontogenic differentiation of hDPCs was induced more in PCL/osteolectin scaffolds than in PCL scaffolds, but there was no statistically significant difference. 3D-printed PCL scaffolds with pores are suitable for the growth of hDPCs, and the PCL/osteolectin scaffolds can provide a more favorable microenvironment for the odontogenic differentiation of hDPCs.

Development and Characterization of Heparin-Containing Hydrogel/3D-Printed Scaffold Composites for Craniofacial Reconstruction

Regeneration of cartilage and bone tissues remains challenging in tissue engineering due to their complex structures, and the need for both mechanical support and delivery of biological repair stimuli. Therefore, the goal of this study was to develop a composite scaffold platform for anatomic chondral and osteochondral repair using heparin-based hydrogels to deliver small molecules within 3D-printed porous scaffolds that provide structure, stiffness, and controlled biologic delivery. We designed a mold-injection system to combine hydrolytically degradable hydrogels and 3D-printed scaffolds that could be employed rapidly (< 30 min) in operating room settings (~23 °C). Micro-CT analysis demonstrated the effectiveness of our injection system through homogeneously distributed hydrogel within the pores of the scaffolds. Hydrogels and composite scaffolds exhibited efficient loading (~94%) of a small positively charged heparin-binding molecule (crystal violet) with sustained release over 14 days and showed high viability of encapsulated porcine chondrocytes over 7 days. Compression testing demonstrated nonlinear viscoelastic behavior where tangent stiffness decreased with scaffold porosity (porous scaffold tangent stiffness: 70%: 4.9 MPa, 80%: 1.5 MPa, and 90%: 0.20 MPa) but relaxation was not affected. Lower-porosity scaffolds (70%) showed stiffness similar to lower ranges of trabecular bone (4-8 MPa) while higher-porosity scaffolds (80% and 90%) showed stiffness similar to auricular cartilage (0.16-2 MPa). Ultimately, this rapid composite scaffold fabrication method may be employed in the operating room and utilized to control biologic delivery within load-bearing scaffolds.

A leptin-loaded poly-ϵ-caprolactone 3D printing scaffold for odontoblastic differentiation in human dental pulp cells

This study investigated the effects on odontoblast differentiation of a 3D-printed poly-ϵ-caprolactone (PCL) scaffold that incorporated leptin. Material extrusion-type 3D printing with a 43 000-molecular weight PCL material was used to fabricate a PCL scaffold with a 6 mm diameter, 1 mm height, and 270-340 µm pore size. The experimental groups were PCL scaffolds (control group), PCL scaffolds with aminated surfaces (group A), and PCL scaffolds with leptin on the aminated surface (group L). The aminated surface was treated with 1,6-hexanediamine and verified by ninhydrin analysis. Leptin loading was performed using Traut's reagent and 4-(N-Maleimidomethyl)cyclohexane-1-carboxylic acid 3-sulfo-N-hydroxysuccinimide ester sodium salt (Sulfo-SMCC). Groups A and L showed significantly higher surface wettability, pulp cell adhesion, and proliferation than the control group. Group L exhibited increased alkaline phosphatase, calcification deposits, and mRNA and protein expression of dentin sialophosphoprotein and dentin matrix acidic phosphoprotein 1 compared with the control group. In this study, a 3D-printed PCL scaffold containing leptin was enhanced odontoblast differentiation and dental pulp cells adhesion and proliferation.

A bioactive microparticle-loaded osteogenically enhanced bioprinted scaffold that permits sustained release of BMP-2

Extrusion-based bioprinting technology is widely used for tissue regeneration and reconstruction. However, the method that uses only hydrogel as the bioink base material exhibits limited biofunctional properties and needs improvement to achieve the desired tissue regeneration. In this study, we present a three-dimensionally printed bioactive microparticle-loaded scaffold for use in bone regeneration applications. The unique structure of the microparticles provided sustained release of growth factor for > 4 weeks without the use of toxic or harmful substances. Before and after printing, the optimal particle ratio in the bioink for cell viability demonstrated a survival rate of ≥ 85% over 7 days. Notably, osteogenic differentiation and mineralization-mediated by human periosteum-derived cells in scaffolds with bioactive microparticles-increased over a 2-week interval. Here, we present an alternative bioprinting strategy that uses the sustained release of bioactive microparticles to improve biofunctional properties in a manner that is acceptable for clinical bone regeneration applications.

Engineered biochemical cues of regenerative biomaterials to enhance endogenous stem/progenitor cells (ESPCs)-mediated articular cartilage repair

As a highly specialized shock-absorbing connective tissue, articular cartilage (AC) has very limited self-repair capacity after traumatic injuries, posing a heavy socioeconomic burden. Common clinical therapies for small- to medium-size focal AC defects are well-developed endogenous repair and cell-based strategies, including microfracture, mosaicplasty, autologous chondrocyte implantation (ACI), and matrix-induced ACI (MACI). However, these treatments frequently result in mechanically inferior fibrocartilage, low cost-effectiveness, donor site morbidity, and short-term durability. It prompts an urgent need for innovative approaches to pattern a pro-regenerative microenvironment and yield hyaline-like cartilage with similar biomechanical and biochemical properties as healthy native AC. Acellular regenerative biomaterials can create a favorable local environment for AC repair without causing relevant regulatory and scientific concerns from cell-based treatments. A deeper understanding of the mechanism of endogenous cartilage healing is furthering the (bio)design and application of these scaffolds. Currently, the utilization of regenerative biomaterials to magnify the repairing effect of joint-resident endogenous stem/progenitor cells (ESPCs) presents an evolving improvement for cartilage repair. This review starts by briefly summarizing the current understanding of endogenous AC repair and the vital roles of ESPCs and chemoattractants for cartilage regeneration. Then several intrinsic hurdles for regenerative biomaterials-based AC repair are discussed. The recent advances in novel (bio)design and application regarding regenerative biomaterials with favorable biochemical cues to provide an instructive extracellular microenvironment and to guide the ESPCs (e.g. adhesion, migration, proliferation, differentiation, matrix production, and remodeling) for cartilage repair are summarized. Finally, this review outlines the future directions of engineering the next-generation regenerative biomaterials toward ultimate clinical translation.

3D printing of complicated GelMA-coated Alginate/Tri-calcium silicate scaffold for accelerated bone regeneration

Polymer-based composite scaffolds are an attractive class of biomaterials due to their suitable physical and mechanical performance as well as appropriate biological properties. When such composites contain osteoinductive ceramic nanopowders, it is possible, in principle, to stimulate the seeded cells to differentiate into osteoblasts. However, reproducibly fabricating and developing an appropriate niche for cells' activities in three-dimensional (3D) scaffolds remains a challenge using conventional fabrication techniques. Additive manufacturing provides a new strategy for the fabrication of complex 3D structures. Here, an extrusion-based 3D printing method was used to fabricate the Alginate (Alg)/Tri-calcium silicate (C₃S) bone scaffolds. To improve physical and biological attributes, scaffolds were coated with gelatin methacryloyl (GelMA), a biocompatible viscose hydrogel. Conducting a combination of experimental techniques and molecular dynamics simulations, it is found that the composition ratio of Alg/C₃S governs intermolecular interactions among the polymer and ceramic, affecting the product performance. Investigating the effects of various C₃S amounts in the bioinks, the 90/10 composition ratio of Alg/C₃S is known as the optimum content in developed bioinks. Accordingly, the printability of high-viscosity inks is boosted by improved hierarchical interactions among assemblies, which in turn leads to better nanoscale alignment in extruded macroscopic filaments. Conducting multiple tests on specimens, the GelMA-coated Alg/C₃S scaffolds (with a composition ratio of 90/10) were shown to have improved mechanical qualities and cell adhesion, spreading, proliferation, and osteogenic differentiation, compared to the bare scaffolds, making them better candidates for further future research. Overall, the in-silico and in vitro studies of GelMA-coated 3D-printed Alg/C₃S scaffolds open new aspects for biomaterials aimed at the regeneration of large- and complicated-bone defects through modifying the extrusion-based 3D-printed constructs.

Evaluation of Topology Optimization Using 3D Printing for Bioresorbable Fusion Cages: A Biomechanical Study in a Porcine Model

STUDY DESIGN

Preclinical biomechanical study of topology optimization versus standard ring design for bioresorbable poly-ε-caprolactone (PCL) cervical spine fusion cages delivering bone morphogenetic protein-2 (BMP-2) using a porcine model.

OBJECTIVE

The aim was to evaluate range of motion (ROM) and bone fusion, as a function of topology optimization and BMP-2 delivery method.

SUMMARY OF BACKGROUND DATA

3D printing technology enables fabrication of topology-optimized cages using bioresorbable materials, offering several advantages including customization, and lower stiffness. Delivery of BMP-2 using topology optimization may enhance the quality of fusion.

METHODS

Twenty-two 6-month-old pigs underwent anterior cervical discectomy fusion at one level using 3D printed PCL cages. Experimental groups (N=6 each) included: Group 1: ring design with surface adsorbed BMP-2, Group 2: topology-optimized rectangular design with surface adsorbed BMP-2, and Group 3: ring design with BMP-2 delivery via collagen sponge. Additional specimens, two of each design, were implanted without BMP-2, as controls. Complete cervical segments were harvested six months postoperatively. Nanocomputed tomography was performed to assess complete bony bridging. Pure moment biomechanical testing was conducted in all three planes, separately. Continuous 3D motions were recorded and analyzed.

RESULTS

Three subjects suffered early surgical complications and were not evaluated. Overall, ROM for experimental specimens, regardless of design or BMP-2 delivery method, was comparable, with no clinically significant differences among groups. Among experimental specimens at the level of the fusion, ROM was <1.0° in flexion and extension, indicative of fusion, based on clinically applied criteria for fusion of <2 to 4°. Despite the measured biomechanical stability, using computed tomography evaluation, complete bony bridging was observed in 40% of the specimens in Group 1, 50% of Group 2, 100% of Group 3, and none of the control specimens.

CONCLUSION

A topology-optimized PCL cage with BMP-2 is capable of resulting in an intervertebral fusion, similar to a conventional ring-based design of the same bioresorbable material.

Bioactive Porous Particles as Biological and Physical Stimuli for Bone Regeneration

Even though bony defects can be recovered to their original condition with full functionality, critical-sized bone injuries continue to be a challenge in clinical fields due to deficiencies in the scaffolding matrix and growth factors at the injury region. In this study, we prepared bone morphogenetic protein-2 (BMP-2)-loaded porous particles as a bioactive bone graft for accelerated bone regeneration. The porous particles with unique leaf-stacked morphology (LSS particles) were fabricated by a simple cooling procedure of hot polycaprolactone (PCL) solution. The unique leaf-stacked structure in the LSS particles provided a large surface area and complex release path for the sufficient immobilization of BMP-2 and sustained release of BMP-2 for 26 days. The LSS was also recognized as a topographical cue for cell adhesion and differentiation. In in vitro cell culture and in vivo animal study using a canine mandible defect model, BMP-2-immobilized LSS particles provided a favorable environment for osteogenic differentiation of stem cells and bone regeneration. In vitro study suggests a dual stimulus of bone mineral-like (leaf-stacked) structure (a physical cue) and continuously supplied BMP-2 (a biological cue) to be the cause of this improved healing outcome. Thus, LSS particles containing BMP-2 can be a promising bioactive grafting material for effective new bone formation.

Enhanced bone regeneration via spatiotemporal and controlled delivery of a genetically engineered BMP-2 in a composite Hydrogel

Scaffolds functionalized with bone morphogenetic protein-2 (BMP-2) have shown great potential for bone regeneration. However, structural instability and the necessity for supra-physiological dose have thus far limited practical applications for BMP-2. Protein modification and site-specific covalent immobilization of BMP-2 to carrier materials might be optimal strategies to overcome these problems. Here, we report a broadly applicable strategy where the polyhistidine tag-T4 Lysozyme (His6-T4L) was genetically fused at the N-terminus of BMP-2 and used as a protein spacer, which on one hand enhanced protein solubility and stability, and on the other hand mediated site-specific covalent anchoring of BMP-2 upon binding to nickel-chelated nitrilotriacetic acid (Ni-NTA) microparticles (denoted as MPs-His6-T4L-BMP2) to further maximize its rescued activity. We also constructed a novel gelatin-based hydrogel that was crosslinked by transglutaminase (TG) and tannic acid (TA). This hydrogel, when incorporated with MPs-His6-T4L-BMP2, displayed excellent in-situ injectability, thermosensitivity, adhesiveness and improved mechanical properties. The effective loading mode led to a controlled and long-term sustained release of His6-T4L-BMP2, thereby resulting in enhancement of bone regeneration in a critical-sized bone defect. We believe that the protein modification strategy proposed here opens up new route not only for BMP-2 applications, but can be used to inform novel uses for other macromolecules.

Strategies to Control or Mimic Growth Factor Activity for Bone, Cartilage, and Osteochondral Tissue Engineering

Growth factors play a critical role in tissue repair and regeneration. However, their clinical success is limited by their low stability, short half-life, and rapid diffusion from the delivery site. Supraphysiological growth factor concentrations are often required to demonstrate efficacy but can lead to adverse reactions, such as inflammatory complications and increased cancer risk. These issues have motivated the development of delivery systems that enable sustained release and controlled presentation of growth factors. This review specifically focuses on bioconjugation strategies to enhance growth factor activity for bone, cartilage, and osteochondral applications. We describe approaches to localize growth factors using noncovalent and covalent methods, bind growth factors via peptides, and mimic growth factor function with mimetic peptide sequences. We also discuss emerging and future directions to control spatiotemporal growth factor delivery to improve functional tissue repair and regeneration.

Tissue-engineered vascularized patient-specific temporomandibular joint reconstruction in a Yucatan pig model

PURPOSE

Current pediatric temporomandibular joint (TMJ) reconstruction options are limited. The aim of this project was to develop a proof-of-principle porcine model for a load-bearing, customized, 3D-printed and bone morphogenic protein 2 (BMP-2)-coated scaffold implanted in a pedicled (temporal) flap as a regenerative approach to pediatric TMJ mandibular condyle reconstruction.

MATERIALS AND METHODS

Scaffolds were customized, 3D-printed based on porcine computed tomography, and coated with BMP-2. Two operations occurred: (1) implantation of the scaffold in temporalis muscle to establish vascularity and, (2) 6 weeks later, unilateral condylectomy and rotation of the vascularized scaffold (with preservation of superficial temporal artery) onto the defect. Six months later, pigs were sacrified. The experimental side (muscle-scaffold) and control side (unoperated condyle) were individually evaluated by clinical, mechanical, radiographic, and histologic methods.

RESULTS

Scaffolds maintained physical properties similar in appearance to unoperated condyles. Vascularized scaffolds had new bone formation. Condyle height on the reconstructed side was 68% and 78% of the control side. Reconstructed condyle stiffness was between 20% and 45% of the control side.

CONCLUSION

In our porcine model, customized 3D-printed TMJ scaffolds coated with BMP-2 and implanted in vascularized temporalis muscle have the ability to (1) reconstruct a TMJ, (2) maintain appropriate condylar height, and (3) generate new bone, without impacting functional outcomes.

Nanohydroxyapatite/polyamide 66 crosslinked with QK and BMP-2-derived peptide prevented femur nonunion in rats

A dual-peptide controlled released system based on nHA/PA66 scaffold for enhancing bone regeneration.

Intervertebral Disc Regeneration Using Stem Cell/Growth Factor-Loaded Porous Particles with a Leaf-Stacked Structure

Although biological therapies based on growth factors and transplanted cells have demonstrated some positive outcomes for intervertebral disc (IVD) regeneration, repeated injection of growth factors and cell leakage from the injection site remain considerable challenges for human therapeutic use. Herein, we prepare human bone marrow-derived mesenchymal stem cells (hBMSCs) and transforming growth factor-β3 (TGF-β3)-loaded porous particles with a unique leaf-stack structural morphology (LSS particles) as a combination bioactive delivery matrix for degenerated IVD. The LSS particles are fabricated with clinically acceptable biomaterials (polycaprolactone and tetraglycol) and procedures (simple heating and cooling). The LSS particles allow sustained release of TGF-β3 for 18 days and stable cell adhesiveness without additional modifications of the particles. On the basis of in vitro and in vivo studies, it was observed that the hBMSCs/TGF-β3-loaded LSS particles can provide a suitable milieu for chondrogenic differentiation of hBMSCs and effectively induce IVD regeneration in a beagle dog model. Thus, therapeutically loaded LSS particles offer the promise of an effective bioactive delivery system for regeneration of various tissues including IVD.

Signaling Molecule-Immobilized Porous Particles with a Leaf-Stacked Structure as a Bioactive Filler System

The ultimate purpose of this study was to develop a bioactive filler system that would allow volume restoration (passive property) and continuous release of signaling molecules to recruit soft tissues (bioactive property) and thus effectively correct facial aging. To achieve this, we prepared porous particles with a leaf-stacked structure throughout the entire particle volume (LSS particles) using a simple heating-cooling technique. LSS particles were loaded with insulin-like growth factor-1 (IGF-1) and vascular endothelial growth factor (VEGF) separately, by immersing the particles in signaling molecule-containing solutions for target tissue recruitment (adipose by IGF-1 and blood vessels by VEGF). IGF-1 and VEGF were continuously released from LSS particles for 28 and 21 days in vitro, respectively, even without additional chemical/physical modifications, because of the unique morphology of the particles. Signaling molecules preserved their bioactivity in vitro (induction of adipogenic and angiogenic differentiation) and in vivo (recruitment of fat and blood vessels) for a sufficient period. Moreover, it was observed that the LSS particles themselves have stable volume retention characteristics in the body. Thus, we suggest that the signaling molecule-loaded LSS particles can function as a bioactive filler system for volume retention and target tissue regeneration.

Programmed Sustained Release of Recombinant Human Bone Morphogenetic Protein-2 and Inorganic Ion Composite Hydrogel as Artificial Periosteum

Recombinant human bone morphogenetic protein-2 (rhBMP-2) and bioceramic are the widely used bioactive factors in treatment of bone defects, but these easily cause side effects because of uncontrollable local concentration. In this study, rhBMP-2 was grafted on the surface of mesoporous bioglass nanoparticles (MBGNs) with an amide bond and then photo-cross-linked together with methacrylate gelatin (GelMA); in this way, a GelMA/MBGNs-rhBMP-2 hydrogel membrane was fabricated to release rhBMP-2 in a controllable program during the early bone regeneration period and then release calcium and silicon ions to keep promoting osteogenesis instead of rhBMP-2 in a long term. In this way, rhBMP-2 can keep releasing for 4 weeks and then the ions keep releasing after 4 weeks; this process is matched to early and late osteogenesis procedures. In vitro study demonstrated that the early release of rhBMP-2 can effectively promote local cell osteogenic differentiation in a short period, and then, the inorganic ions can promote cell adhesion not only in the early stage but also keep promoting osteogenic differentiation for a long period. Finally, the GelMA/MBGNs-rhBMP-2 hydrogel shows a superior capacity in long-term osteogenesis and promoting bone tissue regeneration in rat calvarial critical size defect. This GelMA/MBGNs-rhBMP-2 hydrogel demonstrated a promising strategy for the controllable and safer use of bioactive factors such as rhBMP-2 in artificial periosteum to accelerate bone repairing.

Osterix-mCherry Expression Allows for Early Bone Detection in a Calvarial Defect Model

The process of new bone formation following trauma requires the temporal recruitment of cells to the site, including mesenchymal stem cells, preosteoblasts, and osteoblasts, the latter of which deposit minerals. Hence, bone repair, a process that is assessed by the extent of mineralization within the defect, can take months before it is possible to determine if a treatment is successful. Here, a fluorescently tagged Osterix, an early key gene in the bone formation cascade, is used as a predictive measure of bone formation. Using a calvarial defect model in mice, the ability to noninvasively track the Osterix transcription factor in an Osterix-mCherry mouse model is evaluated as a measure for bone formation following treatment with recombinant human Bone-Morphogenetic-Protein 2 (rhBMP-2). Two distinct delivery materials are utilized, an injectable nanocomposite hydrogel and a collagen sponge, that afford distinct release kinetics and it is found that cherry-fluorescent protein can be detected as early as 2 weeks following treatment. Osterix intensity correlates with subsequent bone formation and hence can serve as a rapid screening tool for osteogenic drugs or for the evaluation and optimization of delivery platforms.

Aminolysis of Various Aliphatic Polyesters in a Form of Nanofibers and Films

Surface functionalization of polymer scaffolds is a method used to improve interactions of materials with cells. A frequently used method for polyesters is aminolysis reaction, which introduces free amine groups on the surface. In this study, nanofibrous scaffolds and films of three different polyesters-polycaprolactone (PCL), poly(lactide-co-caprolactone) (PLCL), and poly(l-lactide) (PLLA) were subjected to this type of surface modification under the same conditions. Efficiency of aminolysis was evaluated on the basis of ninhydrin tests and ATR-FTIR spectroscopy. Also, impact of this treatment on the mechanical properties, crystallinity, and wettability of polyesters was compared and discussed from the perspective of aminolysis efficiency. It was shown that aminolysis is less efficient in the case of nanofibers, particularly for PCL nanofibers. Our hypothesis based on the fundamentals of classical high speed spinning process is that the lower efficiency of aminolysis in the case of nanofibers is associated with the radial distribution of crystallinity of electrospun fiber with more crystalline skin, strongly inhibiting the reaction. Moreover, the water contact angle results demonstrate that the effect of free amino groups on wettability is very different depending on the type and the form of polymer. The results of this study can help to understand fundamentals of aminolysis-based surface modification.

In Situ Gelling Hydrogel with Anti-Bacterial Activity and Bone Healing Property for Treatment of Osteomyelitis

Background

Despite the development of progressive surgical techniques and antibiotics, osteomyelitis is a big challenge for orthopedic surgeons. The main aim of this study is to fabricate an in situ gelling hydrogel that permits sustained release of antibiotic (for control of infection) and growth factor (for induction of new bone formation) for effective treatment of osteomyelitis.

Methods

An in situ gelling alginate (ALG)/hyaluronic acid (HA) hydrogel containing vancomycin (antibiotic) and bone morphogenetic protein-2 (BMP-2; growth factor) was prepared by simple mixing of ALG/HA/Na₂HPO₄ solution and CaSO₄/vancomycin/BMP-2 solution. The release behaviors of vancomycin and BMP-2, anti-bacterial effect (in vitro); and therapeutic efficiency for osteomyelitis and bone regeneration (in vivo, osteomyelitis rat model) of the vancomycin and BMP-2-incorporated ALG/HA hydrogel were investigated.

Results

The gelation time of the ALG/HA hydrogel was controlled into approximately 4 min, which is sufficient time for handling and injection into osteomyelitis lesion. Both vancomycin and BMP-2 were continuously released from the hydrogel for 6 weeks. From the in vitro studies, the ALG/HA hydrogel showed an effective anti-bacterial activity without significant cytotoxicity for 6 weeks. From an in vivo animal study using Sprague-Dawley rats with osteomyelitis in femur as a model animal, it was demonstrated that the ALG/HA hydrogel was effective for suppressing bacteria (Staphylococcus aureus) proliferation at the osteomyelitis lesion and enhancing bone regeneration without additional bone grafts.

Conclusions

From the results, we suggest that the in situ gelling ALG/HA hydrogel containing vancomycin and BMP-2 can be a feasible therapeutic tool to treat osteomyelitis.

Use of thioglycerol on porous polyurethane as an effective theranostic capping agent for bone tissue engineering

Thiolated biodegradable polyurethane (TG-DPU) was synthesized using a one-pot reaction with thioglycerol adopted as a functionalized chain extender. After characterization of the chemical structure of TG-DPU using proton nuclear magnetic resonance spectroscopy, bone morphogenetic protein (BMP-2) was loaded in the TG-DPU under oxidative conditions to form disulfides between the free thiol of TG-DPU and BMP-2. The interaction between TG-DPU and BMP-2, so-called bioconjugates, was investigated using X-ray photoelectron spectroscopy analysis; the appearance of disulfide (S–S) linkage indicated the formation of a polymer/growth factor conjugate system. The covalently linked bioconjugates provided stability with minimal loss during the drug delivery with prolonged release performance in in vitro release tests. The effects of the drugs delivered by TG-DPU were also confirmed by in vitro alkaline phosphatase tests using pre-osteoblasts and in vivo bone regeneration tests. The drugs effectively induced cell differentiation and promoted mature bone recovery.

BMP-2-Immobilized Porous Matrix with Leaf-Stacked Structure as a Bioactive GBR Membrane

We developed an asymmetrically porous membrane with a leaf-stacked structure (LSS membrane; top with nanosized pores and bulk/bottom with leaf-stacked structure) via immersion-precipitation using polycarprolactone (PCL)/Pluronic F127 mixture solution (in tetraglycol). The bone morphogenetic protein-2 (BMP-2) is immobilized on the pore surfaces of the LSS membrane by immersing the membrane in the BMP-2 solution. The BMP-2 loaded in the LSS membrane is continuously released for 38 days (without additional modifications of the matrix) to improve osteogenic differentiation of cells and new bone formation (carvarial defect rat model). The leaf-stacked structure is recognized to be a physical stimulus for bone regeneration, and the stimulation effect is comparable to that of continuously released BMP-2. Moreover, we observe the combined effect of BMP-2 and the leaf-stacked structure for bone healing. Thus, we suggest that the BMP-2-immobilized LSS membrane may be a candidate as a bioactive guided bone regeneration (GBR) membrane for clinical applications, due to the use of clinically acceptable biomaterials and fabrication procedures as well as effective osteogenic differentiation and bone regeneration.

Sustained Release of BMP-2 from Porous Particles with Leaf-Stacked Structure for Bone Regeneration

Sustained release of bioactive molecules from delivery systems is a common strategy for ensuring their prolonged bioactivity and for minimizing safety issues. However, residual toxic reagents, the use of harsh organic solvents, and complex fabrication procedures in conventional delivery systems are considered enormous impediments toward clinical use. Herein, we describe bone morphogenetic protein-2 (BMP-2)-immobilized porous polycaprolactone particles with unique leaf-stacked structures (LSS particles) prepared using clinically feasible materials and procedures. The BMP-2 immobilized in these LSS particles is continuously released up to 36 days to provide an appropriate environment for osteogenic differentiation of human periosteum-derived cells and new bone formation. Thus, the leaf-stacked structures of these LSS particles provide a simple but clinically applicable platform for effectively delivering a variety of bioactive molecules, such as growth factors, hormones, cytokines, peptides, etc.

Novel 3D Hybrid Nanofiber Aerogels Coupled with BMP-2 Peptides for Cranial Bone Regeneration

An ideal synthetic bone graft is a combination of the porous and nanofibrous structure presented by natural bone tissue as well as osteoinductive biochemical factors such as bone morphogenetic protein 2 (BMP-2). In this work, ultralight 3D hybrid nanofiber aerogels composed of electrospun PLGA-collagen-gelatin and Sr-Cu codoped bioactive glass fibers with incorporation of heptaglutamate E7 domain specific BMP-2 peptides have been developed and evaluated for their potential in cranial bone defect healing. The nanofiber aerogels are surgically implanted into 8 mm × 1 mm (diameter × thickness) critical-sized defects created in rat calvariae. A sustained release of E7-BMP-2 peptide from the degradable hybrid aerogels significantly enhances bone healing and defect closure over 8 weeks in comparison to unfilled defects. Histomorphometry and X-ray microcomputed tomography (µ-CT) analysis reveal greater bone volume and bone formation area in case of the E7-BMP-2 peptide loaded hybrid nanofiber aerogels. Further, histopathology data divulged a near complete nanofiber aerogel degradation along with enhanced vascularization of the regenerated tissue. Together, this study for the first time demonstrates the fabrication of 3D hybrid nanofiber aerogels from 2D electrospun fibers and their loading with therapeutic osteoinductive BMP-2 mimicking peptide for cranial bone tissue regeneration.

Multivalent ion-based in situ gelling polysaccharide hydrogel as an injectable bone graft

We prepared in situ gelling alginate (ALG)/hyaluronic acid (HA) hydrogels with a controllable gelation rate using CaSO₄ as a crosslinking agent and Na₂HPO₄ as a crosslinking retardation agent. The ALG/HA hydrogels provided sustained release of bone morphogenetic protein-2 (BMP-2) immobilized in the hydrogels over 5 weeks. The BMP-2-immobilized ALG/HA hydrogels with different ALG/HA ratios were investigated for their in vitro osteogenic differentiation behavior of human bone marrow stem cells (hBMSCs) and in vivo bone regeneration behavior using an animal model (mandibular defect model of miniature pigs). Our findings from cell culture and animal study demonstrated that the osteogenic differentiation of hBMSCs was improved with increasing HA composition in the hydrogel. The hBMSCs/BMP-2-immobilized ALG/HA hydrogel allowed greatly enhanced osteogenic differentiation of hBMSCs (in vitro) and bone regeneration (in vivo) compared with the ALG/HA hydrogel itself and single hBMSCs- or BMP-2-immobilized hydrogel groups.

Development of a Cell-Based Gene Therapy Approach to Selectively Turn Off Bone Formation

Cell and gene therapy approaches are safer when they possess a system that enables the therapy to be rapidly halted. Human mesenchymal stem cells were transduced with an adenoviral vector containing the cDNA for bone morphogenetic protein 2 (AdBMP2) to induce bone formation. To make this method safer, a system to quickly kill these virally transduced cells was designed and evaluated. Cells were encapsulated inside poly(ethylene glycol) diacrylate (PEG-Da) hydrogels that are able to shield the cells from immunological destruction. The system involves an inducible caspase-9 (iCasp9) activated using a specific chemical inducer of dimerization (CID). Delivering AdBMP2-transduced human mesenchymal stem cells encapsulated in PEG-Da hydrogel promoted ectopic ossification in vivo, and the iCasp9 system allowed direct control of the timing of apoptosis of the injected cells. The iCasp9-CID system enhances the safety of delivering AdBMP2-transduced cells, making it a more compelling therapeutic for bone repair and spine fusion. J. Cell. Biochem. 118: 3627-3634, 2017. © 2017 Wiley Periodicals, Inc.

Use of Pig as a Model for Mesenchymal Stem Cell Therapies for Bone Regeneration

Bone is a plastic tissue with a large healing capability. However, extensive bone loss due to disease or trauma requires extreme therapy such as bone grafting or tissue-engineering applications. Presently, bone grafting is the gold standard for bone repair, but presents serious limitations including donor site morbidity, rejection, and limited tissue regeneration. The use of stem cells appears to be a means to overcome such limitations. Bone marrow mesenchymal stem cells (BMSC) have been the choice thus far for stem cell therapy for bone regeneration. However, adipose-derived stem cells (ASC) have similar immunophenotype, morphology, multilineage potential, and transcriptome compared to BMSC, and both types have demonstrated extensive osteogenic capacity both in vitro and in vivo in several species. The use of scaffolds in combination with stem cells and growth factors provides a valuable tool for guided bone regeneration, especially for complex anatomic defects. Before translation to human medicine, regenerative strategies must be developed in animal models to improve effectiveness and efficiency. The pig presents as a useful model due to similar macro- and microanatomy and favorable logistics of use. This review examines data that provides strong support for the clinical translation of the pig model for bone regeneration.

Integrating Image-Based Design and 3D Biomaterial Printing to create Patient Specific Devices within a Design Control Framework for Clinical Translation

Despite significant advances in 3D biomaterial printing, the potential of 3D printing for patient specific implants and tissue reconstruction has not been fully exploited. This is due in part to the lack of integration of image-based patient specific design with 3D biomaterial printing within a relevant regulatory framework, namely design control, required by the FDA. In this manuscript, we describe the integration of image-based, multi-scale patient specific design with 3D biomaterial printing within a design control framework for clinical translation. Specifically, we define design inputs for patient specific implants and scaffolds, and utilize image-based patient specific design to achieve these design inputs. We then illustrate realization of these topology designed patient specific implants by laser sintering of polycaprolactone (PCL). Finally, we present initial results in large animal models using 3D printed PCL implants addressing two challenging problems in tissue reconstruction: 1) designing and 3D printing implantable devices to allow growth in pediatric airway applications and 2) utilizing 3D printed scaffolds as foundations for pre-fabricated flaps to obtain vascularization and bone formation for large volume bone/soft tissue reconstruction. We illustrate these challenging problems as they need to be incorporated in design control, but as of yet there is little data to direct how growth and vascularization should be utilized in design control.

Bone Graft Prefabrication Following the In Vivo Bioreactor Principle

Large bone defect treatment represents a great challenge due to the difficulty of functional and esthetic reconstruction. Tissue-engineered bone grafts created by in vitro manipulation of bioscaffolds, seed cells, and growth factors have been considered potential treatments for bone defect reconstruction. However, a significant gap remains between experimental successes and clinical translation. An emerging strategy for bridging this gap is using the in vivo bioreactor principle and flap prefabrication techniques. This principle focuses on using the body as a bioreactor to cultivate the traditional triad (bioscaffolds, seed cells, and growth factors) and leveraging the body's self-regenerative capacity to regenerate new tissue. Additionally, flap prefabrication techniques allow the regenerated bone grafts to be transferred as prefabricated bone flaps for bone defect reconstruction. Such a strategy has been used successfully for reconstructing critical-sized bone defects in animal models and humans. Here, we highlight this concept and provide some perspective on how to translate current knowledge into clinical practice.

•

The in vivo bioreactor principle and flap prefabrication technique is a promising strategy for bone defect reconstruction.

•

The in vivo bioreactor principle focuses on using the body’s self-regenerative capacity to regenerate new tissue.

•

This strategy has been successfully used to reconstruct critical-sized bone defects in humans.

Development of Porous Beads to Provide Regulated BMP-2 Stimulation for Varying Durations: In Vitro and In Vivo Studies for Bone Regeneration

It is commonly accepted that the sustained release of bone morphogenetic protein-2 (BMP-2) can enhance bone regeneration and minimize its safety issues. However, little is known regarding the appropriate duration of BMP-2 stimulation for sufficient osteogenic differentiation and new bone formation because of the short half-life of BMP-2 in the physiological environment and the lack of a well-defined delivery matrix that can regulate the release period of BMP-2. In this study, we prepared porous poly(lactic-co-glycolic acid) (PLGA) beads with different surface pore sizes that can regulate the release period of BMP-2 (i.e., 7, 17, and 30 days) while providing the BMP-2 concentration required for bone regeneration. Our findings in both in vitro cell culture and in vivo animal studies using these BMP-2-loaded beads demonstrate that release of BMP-2 within 7 days affects only the initial differentiation of human periosteum-derived cells (hPDCs) and does not significantly enhance their subsequent differentiation into mature functional cells. However, extending the duration of BMP-2 stimulation over 17 days can provide a suitable environment for osteogenic differentiation of hPDCs and new bone formation.

Evaluation of multi-scale mineralized collagen-polycaprolactone composites for bone tissue engineering

A particular challenge in biomaterial development for treating orthopedic injuries stems from the need to balance bioactive design criteria with the mechanical and geometric constraints governed by the physiological wound environment. Such trade-offs are of particular importance in large craniofacial bone defects which arise from both acute trauma and chronic conditions. Ongoing efforts in our laboratory have demonstrated a mineralized collagen biomaterial that can promote human mesenchymal stem cell osteogenesis in the absence of osteogenic media but that possesses suboptimal mechanical properties in regards to use in loaded wound sites. Here we demonstrate a multi-scale composite consisting of a highly bioactive mineralized collagen-glycosaminoglycan scaffold with micron-scale porosity and a polycaprolactone support frame (PCL) with millimeter-scale porosity. Fabrication of the composite was performed by impregnating the PCL support frame with the mineral scaffold precursor suspension prior to lyophilization. Here we evaluate the mechanical properties, permeability, and bioactivity of the resulting composite. Results indicated that the PCL support frame dominates the bulk mechanical response of the composite resulting in a 6000-fold increase in modulus compared to the mineral scaffold alone. Similarly, the incorporation of the mineral scaffold matrix into the composite resulted in a higher specific surface area compared to the PCL frame alone. The increased specific surface area in the collagen-PCL composite promoted increased initial attachment of porcine adipose derived stem cells versus the PCL construct.

Integration of 3D Printed and Micropatterned Polycaprolactone Scaffolds for Guidance of Oriented Collagenous Tissue Formation In Vivo

Scaffold design incorporating multiscale cues for clinically relevant, aligned tissue regeneration has potential to improve structural and functional integrity of multitissue interfaces. The objective of this preclinical study is to develop poly(ε-caprolactone) (PCL) scaffolds with mesoscale and microscale architectural cues specific to human ligament progenitor cells and assess their ability to form aligned bone-ligament-cementum complexes in vivo. PCL scaffolds are designed to integrate a 3D printed bone region with a micropatterned PCL thin film consisting of grooved pillars. The patterned film region is seeded with human ligament cells, fibroblasts transduced with bone morphogenetic protein-7 genes seeded within the bone region, and a tooth dentin segment positioned on the ligament region prior to subcutaneous implantation into a murine model. Results indicate increased tissue alignment in vivo using micropatterned PCL films, compared to random-porous PCL. At week 6, 30 μm groove depth significantly enhances oriented collagen fiber thickness, overall cell alignment, and nuclear elongation relative to 10 μm groove depth. This study demonstrates for the first time that scaffolds with combined hierarchical mesoscale and microscale features can align cells in vivo for oral tissue repair with potential for improving the regenerative response of other bone-ligament complexes.

Dual Delivery of EPO and BMP2 from a Novel Modular Poly-ɛ-Caprolactone Construct to Increase the Bone Formation in Prefabricated Bone Flaps

Poly-ɛ-caprolactone (PCL) is a biocompatible polymer that has mechanical properties suitable for bone tissue engineering; however, it must be integrated with biologics to stimulate bone formation. Bone morphogenetic protein-2 (BMP2) delivered from PCL produces bone when implanted subcutaneously, and erythropoietin (EPO) works synergistically with BMP2. In this study, EPO and BMP2 are adsorbed separately on two 3D-printed PCL scaffold modules that are assembled for codelivery on a single scaffold structure. This assembled modular PCL scaffold with dual BMP2 and EPO delivery was shown to increase bone growth in an ectopic location when compared with BMP2 delivery along a replicate scaffold structure. EPO (200 IU/mL) and BMP2 (65 μg/mL) were adsorbed onto the outer and inner portions of a modular scaffold, respectively. Protein binding and release studies were first quantified. Subsequently, EPO+BMP2 and BMP2 scaffolds were implanted subcutaneously in mice for 4 and 8 weeks, and the regenerated bone was analyzed with microcomputed tomography and histology; 8.6±1.4 μg BMP2 (22%) and 140±29 IU EPO (69.8%) bound to the scaffold and <1% BMP2 and 83% EPO was released in 7 days. Increased endothelial cell proliferation on EPO-adsorbed PCL discs indicated protein bioactivity. At 4 and 8 weeks, dual BMP2 and EPO delivery regenerated more bone (5.1±1.1 and 5.5±1.6 mm(3)) than BMP2 alone (3.8±1.1 and 4.3±1.7 mm(3)). BMP2 and EPO scaffolds had more ingrowth (1.4%±0.6%) in the outer module when compared with BMP2 (0.8%±0.3%) at 4 weeks. Dual delivery produced more dense cellular marrow, while BMP2 had more fatty marrow. Dual EPO and BMP2 delivery is a potential method to regenerate bone faster for prefabricated flaps.