Whole-genome sequencing of sake yeast Saccharomyces cerevisiae Kyokai no. 7

Insights into intraspecific diversity of central carbon metabolites in Saccharomyces cerevisiae during wine fermentation

Saccharomyces cerevisiae is a major actor in winemaking that converts sugars from the grape must into ethanol and CO2 with outstanding efficiency. Primary metabolites produced during fermentation have a great importance in wine. While ethanol content contributes to the overall profile, other metabolites like glycerol, succinate, acetate or lactate also have significant impacts, even when present in lower concentrations. S. cerevisiae is known for its great genetic diversity that is related to its natural or technological environment. However, the variation range of metabolic diversity which can be exploited to enhance wine quality depends on the pathway considered. Our experiment assessed the diversity of primary metabolites production in a set of 51 S. cerevisiae strains from various genetic backgrounds. Results pointed out great yield differences depending on the metabolite considered, with ethanol having the lowest variation. A negative correlation between ethanol and glycerol was observed, confirming glycerol synthesis as a suitable lever to reduce ethanol yield. Genetic groups were linked to specific yields, such as the wine group and high α-ketoglutarate and low acetate yields. This research highlights the potential of using natural yeast diversity in winemaking. It also provides a detailed data set on production of well known (ethanol, glycerol, acetate) or little-known (lactate) primary metabolites.

Conversion of polyploid and alloploid Saccharomyces sensu stricto strains to leu2 mutants by genome DNA editing

A large number of recombinant plasmids for the yeast Saccharomyces cerevisiae have been constructed and accumulated over the past four decades. It is desirable to apply the recombinant plasmid resources to Saccharomyces sensu stricto species group, which contains an increasing number of natural isolate and industrial strains. The application to the group encounters a difficulty. Natural isolates and industrial strains are exclusively prototrophic and polyploid, whereas direct application of most conventional plasmid resources imposes a prerequisite in host yeast strains of an auxotrophic mutation (i.e., leu2) that is rescued by a selection gene (e.g., LEU2) on the recombinant plasmids. To solve the difficulty, we aimed to generate leu2 mutants from yeast strains belonging to the yeast Saccharomyces sensu stricto species group by DNA editing. First, we modified an all-in-one type CRISPR-Cas9 plasmid pML104 by adding an antibiotic-resistance gene and designing guide sequences to target the LEU2 gene and to enable wide application in this yeast group. Then, the resulting CRISPR-Cas9 plasmids were exploited to seven strains belonging to five species of the group, including natural isolate, industrial, and allopolyploid strains. Colonies having the designed mutations in the gene appeared successfully by introducing the plasmids and assisting oligonucleotides to the strains. Most of the plasmids and resultant leu2- mutants produced in this study will be deposited in several repository organizations. KEY POINTS: • All-in-one type CRISPR-Cas9 plasmids targeting LEU2 gene were designed for broad application to Saccharomyces sensu stricto group species strains • Application of the plasmids generated leu2 mutants from strains including natural isolates, industrial, and allopolyploid strains • The easy conversion to leu2 mutants permits free access to recombinant plasmids having a LEU2 gene.

Identification and enzymatic properties of arginine decarboxylase from Aspergillus oryzae

Aspergillus oryzae spores, when sprinkled onto steamed rice and allowed to propagate, are referred to as rice "koji." Agmatine, a natural polyamine derived from arginine through the action of arginine decarboxylase (ADC), is abundantly produced by solid state-cultivated rice koji of A. oryzae RIB40 under low pH conditions, despite the apparent absence of ADC orthologs in its genome. Mass spectrometry imaging revealed that agmatine was accumulated inside rice koji at low pH conditions, where arginine was distributed. ADC activity was predominantly observed in substrate mycelia and minimally in aerial mycelia. Natural ADC was isolated from solid state-cultivated A. oryzae rice koji containing substrate mycelia, using ammonium sulfate fractionation, ion exchange, and gel-filtration chromatography. The purified protein was subjected to sodium dodecyl sulfate poly-acrylamide gel electrophoresis (SDS-PAGE), and the detected peptide band was digested for identification by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The gene AO090102000327 of strain RIB40 was identified, previously annotated as phosphatidylserine decarboxylase (PSD), and encoded a 483-amino acid peptide. Recombinant protein encoded by AO090102000327 was expressed in Escherichia coli cells cultivated at 20°C, resulting in the detection of 49 kDa and 5 kDa peptides. The protein exhibited pyruvoyl-dependent decarboxylase activity, favoring arginine over ornithine and showing no activity with phosphatidylserine. The gene was designated Ao-adc1. Ao-ADC1 expression in rice koji at pH 4-6 was confirmed through western blotting using the anti-Ao-ADC1 serum. These findings indicate that Ao-adc1 encodes arginine decarboxylase involved in agmatine production.IMPORTANCEGene AO090102000327 in A. oryzae RIB40, previously annotated as a PSD, falls into a distinct clade when examining the phylogenetic distribution of PSDs. Contrary to the initial PSD annotation, our analysis indicates that the protein encoded by AO090102000327 is expressed in the substrate mycelia area of solid state-cultivated A. oryzae rice koji and functions as an arginine decarboxylase (ADC). The clade to which Ao-ADC1 belongs includes three other Ao-ADC1 paralogs (AO090103000445, AO090701000800, and AO090701000802) that presumably encode ADC rather than PSDs. Regarding PSD, AO090012000733 and AO090005001124 were speculated to be nonmitochondrial and mitochondrial PSDs in A. oryzae RIB40, respectively.

Physiological role of the EHL gene in sake yeast and its effects on quality of sake

The EHL1/2/3 genes were identified by whole-genome sequencing of Kyokai No. 7 (K7), which is a well-known representative Japanese sake yeast Saccharomyces cerevisiae. The genes are present in K7, but not in laboratory strain S288C. Although the genes were presumed to encode epoxide hydrolase based on homology analysis, their effect on cellular metabolism in sake yeast has not yet been clarified. We constructed ehl1/2/3 mutants harboring a stop codon in each gene using the haploid yeast strain H3 as the parental strain, which was derived from K701, and investigated the physiological role and effects of the EHL1/2/3 genes on sake quality. Metabolome analysis and vitamin requirement testing revealed that the EHL1/2/3 genes are partly responsible for the synthesis of pantothenate. For fermentation profiles, ethanol production by the ehl1/2/3 mutant was comparable with that of strain H3, but succinate production was decreased in the ehl1/2/3 mutant compared to strain H3 when cultured in yeast malt (YM) medium containing 10% glucose and during sake brewing. Ethyl hexanoate and isoamyl acetate levels in the ehl1/2/3 mutant strain were decreased compared to those of strain H3 during sake brewing. Thus, the EHL1/2/3 genes did not affect ethanol production but did affect the production of organic acids and aromatic components during sake brewing.

Sake yeast symbiosis with lactic acid bacteria and alcoholic fermentation

The yeast Saccharomyces cerevisiae plays a pivotal role in the production of fermented foods by converting sugars in ingredients into ethanol through alcoholic fermentation. However, how accurate is our understanding of its biological significance? Although yeast is essential to produce alcoholic beverages and bioethanol, yeast does not yield ethanol for humankind. Yeast obtains energy in the form of ATP for its own vital processes through alcoholic fermentation, which generates ethanol as a byproduct. The production of ethanol may have more significance for yeast, since many other organisms do not produce ethanol, a highly toxic substance, to obtain energy. The key to address this issue has not been found using conventional microbiology, where yeasts are isolated and cultured in pure form. This review focuses on a possible novel role of yeast alcohol fermentation, which is revealed through our recent studies of microbial interactions.

Effect of yeast chromosome II aneuploidy on malate production in sake brewing

Chromosome aneuploidy is a common phenomenon in industrial yeast. Aneuploidy is considered one of the strategies to enhance the industrial properties of Saccharomyces cerevisiae strains. However, the effects of chromosomal aneuploidy on the brewing properties of sake have not been extensively studied. In this study, sake brewing was performed using a series of genome-wide segmental duplicated laboratory S. cerevisiae strains, and the effects of each segmentally duplicated region on sake brewing were investigated. We found that the duplication of specific chromosomal regions affected the production of organic acids and aromatic compounds in sake brewing. As organic acids significantly influence the taste of sake, we focused on the segmental duplication of chromosome II that alters malate levels. Sake yeast Kyokai No. 901 strains with segmental chromosome II duplication were constructed using a polymerase chain reaction-mediated chromosomal duplication method, and sake was brewed using the resultant aneuploid sake yeast strains. The results showed the possibility of developing sake yeast strains exhibiting low malate production without affecting ethanol production capacity. Our study revealed that aneuploidy in yeast alters the brewing properties; in particular, the aneuploidy of chromosome II alters malate production in sake brewing. In conclusion, aneuploidization can be a novel and useful tool to breed sake yeast strains with improved traits, possessing industrial significance.

Glazing Affects the Fermentation Process of Sake Brewed in Pottery

Sake (Japanese rice wine) was fermented in pottery for more than a millennium before wooden barrels were adopted to obtain a greater brewing capacity. Although a recently conducted analysis of sake brewed in pottery indicated that sake brewed in unglazed pottery contains more ethanol than that brewed in glazed pottery, little is known about the characteristics of sake brewed in pottery. In this study, we used two types of ceramic containers of identical size, one glazed and one unglazed, for small-scale sake brewing to evaluate the effects of glazing on fermentation properties. The following parameters were measured continuously in the sake samples over 3 weeks of fermentation: temperature, weight, ethanol concentration, and glucose concentration in sake mash. Taste-sensory values, minerals, and volatile components were also quantified in the final fermented sake mash. The results show that, in the unglazed containers, the temperature of the sake mash was lower and the weight loss was higher compared to the sake mash in the glazed containers. The quantity of ethanol and the levels of Na+, Fe3+, and Al3+ tended to be higher in the sake brewed in the unglazed pottery. A taste-sensory analysis revealed that umami and saltiness were also higher in the samples brewed in the unglazed pottery. These results suggest that glazing affects multiple fermentation parameters and the flavor of sake brewed in pottery. They may also suggest that the materials of the containers used in sake brewing generally affect the fermentation properties.

Integrated genomics and phenotype microarray analysis of Saccharomyces cerevisiae industrial strains for rice wine fermentation and recombinant protein production

The industrial potential of Saccharomyces cerevisiae has extended beyond its traditional use in fermentation to various applications, including recombinant protein production. Herein, comparative genomics was performed with three industrial S. cerevisiae strains and revealed a heterozygous diploid genome for the 98-5 and KSD-YC strains (exploited for rice wine fermentation) and a haploid genome for strain Y2805 (used for recombinant protein production). Phylogenomic analysis indicated that Y2805 was closely associated with the reference strain S288C, whereas KSD-YC and 98-5 were grouped with Asian and European wine strains, respectively. Particularly, a single nucleotide polymorphism (SNP) in FDC1, involved in the biosynthesis of 4-vinylguaiacol (4-VG, a phenolic compound with a clove-like aroma), was found in KSD-YC, consistent with its lack of 4-VG production. Phenotype microarray (PM) analysis showed that KSD-YC and 98-5 displayed broader substrate utilization than S288C and Y2805. The SNPs detected by genome comparison were mapped to the genes responsible for the observed phenotypic differences. In addition, detailed information on the structural organization of Y2805 selection markers was validated by Sanger sequencing. Integrated genomics and PM analysis elucidated the evolutionary history and genetic diversity of industrial S. cerevisiae strains, providing a platform to improve fermentation processes and genetic manipulation.

Discovery of new strains for furfural degradation using adaptive laboratory evolution in Saccharomyces cerevisiae

In industrial production, the excessive discharge of furfural can pose harm to soil microorganisms, aquatic animals and plants, as well as humans. Therefore, it is crucial to develop efficient and cost-effective methods for degrading furfural in the environment. Currently, the use of Saccharomyces cerevisiae for furfural degradation in water has shown effectiveness, but there is a need to explore improved efficiency and tolerance in S. cerevisiae for this purpose. In this study, we isolated and evolved highly efficient furfural degradation strains, namely YBA_08 and F60C. These strains exhibited remarkable capabilities, degrading 59% and 99% furfural in the YPD medium after 72 h of incubation, significantly higher than the 31% achieved by the model strain S288C. Through analysis of the efficient degradation mechanism in the evolutionary strain F60C, we discovered a 326% increase in the total amount of NADH and NADPH. This increase likely promotes faster furfural degradation through intracellular aldehyde reductases. Moreover, the decrease in NADPH content led to a 406% increase in glutathione content at the background level, which protects cells from damage caused by reactive oxygen species. Mutations and differential expression related to cell cycle and cell wall synthesis were observed, enabling cell survival in the presence of furfural and facilitating rapid furfural degradation and growth recovery. Based on these findings, it is speculated that strains YBA_08 and F60C have the potential to contribute to furfural degradation in water and the production of furfuryl alcohol, ethanol, and FDCA in biorefinery processes.

The bio3 mutation in sake yeast leads to changes in organic acid profiles and ester levels but not ethanol production

Biotin is an essential coenzyme that is bound to carboxylases and participates in fatty acid synthesis. The fact that sake yeast exhibit biotin prototrophy while almost all other Saccharomyces cerevisiae strains exhibit biotin auxotrophy, implies that biotin prototrophy is an important factor in sake brewing. In this study, we inserted a stop codon into the biotin biosynthetic BIO3 gene (cording for 7,8-diamino-pelargonic acid aminotransferase) of a haploid sake yeast strain using the marker-removable plasmid pAUR135 and investigated the fermentation profile of the resulting bio3 mutant. Ethanol production was not altered when the bio3 mutant was cultured in Yeast Malt (YM) medium containing 10% glucose at 15 °C and 30 °C. Interestingly, ethanol production was also not changed during the sake brewing process. On the other hand, the levels of organic acids in the bio3 mutant were altered after culturing in YM medium and during sake brewing. In addition, ethyl hexanoate and isoamyl acetate levels decreased in the bio3 mutant during sake brewing. Metabolome analysis revealed that the decreased levels of fatty acids in the bio3 mutant were attributed to the decreased levels of ethyl hexanoate. Further, the transcription level of genes related to the synthesis of ethyl hexanoate and isoamyl acetate were significantly reduced. The findings indicated that although the decrease in biotin biosynthesis did not affect ethanol production, it did affect the synthesis of components such as organic acids and aromatic compounds. Biotin biosynthesis ability is thus a key factor in sake brewing.

Production of S-methyl-methionine using engineered Saccharomyces cerevisiae sake K6

S-methyl-methionine (SMM), also known as vitamin U, is an important food supplement produced by various plants. In this study, we attempted to produce it in an engineered microorganism, Saccharomyces cerevisiae, by introducing an MMT gene encoding a methionine S-methyltransferase from Arabidopsis thaliana. The S. cerevisiae sake K6 strain, which is a Generally Recognized as Safe (GRAS) strain, was chosen as the host because it produces a significant amount of S-adenosylmethionine (SAM), a precursor of SMM. To increase SMM production in the host, MHT1 and SAM4 genes encoding homocysteine S-methyltransferase were knocked out to prevent SMM degradation. Additionally, MMP1, which encodes S-methyl-methionine permease, was deleted to prevent SMM from being imported into the cell. Finally, ACS2 gene encoding acetyl-CoA synthase was overexpressed, and MLS1 gene encoding malate synthase was deleted to increase SAM availability. Using the engineered strain, 1.92 g/L of SMM was produced by fed-batch fermentation.

ONE-SENTENCE SUMMARY

Introducing a plant-derived MMT gene encoding methionine S-methyltransferase into engineered Saccharomyces cerevisiae sake K6 allowed microbial production of S-methyl-methionine (SMM).

Progress of Molecular Display Technology Using Saccharomyces cerevisiae to Achieve Sustainable Development Goals

In the long history of microorganism use, yeasts have been developed as hosts for producing biologically active compounds or for conventional fermentation. Since the introduction of genetic engineering, recombinant proteins have been designed and produced using yeast or bacterial cells. Yeasts have the unique property of expressing genes derived from both prokaryotes and eukaryotes. Saccharomyces cerevisiae is one of the well-studied yeasts in genetic engineering. Recently, molecular display technology, which involves a protein-producing system on the yeast cell surface, has been established. Using this technology, designed proteins can be displayed on the cell surface, and novel abilities are endowed to the host yeast strain. This review summarizes various molecular yeast display technologies and their principles and applications. Moreover, S. cerevisiae laboratory strains generated using molecular display technology for sustainable development are described. Each application of a molecular displayed yeast cell is also associated with the corresponding Sustainable Development Goals of the United Nations.

Development of sake yeast breeding and analysis of genes related to its various phenotypes

Sake is a traditional Japanese alcoholic beverage made from rice and water, fermented by the filamentous fungi Aspergillus oryzae and the yeast Saccharomyces cerevisiae. Yeast strains, also called sake yeasts, with high alcohol yield and the ability to produce desired flavor compounds in the sake, have been isolated from the environment for more than a century. Furthermore, numerous methods to breed sake yeasts without genetic modification have been developed. The objectives of breeding include increasing the efficiency of production, improving the aroma and taste, enhancing safety, imparting functional properties, and altering the appearance of sake. With the recent development of molecular biology, the suitable sake brewing characteristics in sake yeasts, and the causes of acquisition of additional phenotypes in bred yeasts have been elucidated genetically. This mini-review summarizes the history and lineage of sake yeasts, their genetic characteristics, the major breeding methods used, and molecular biological analysis of the acquired strains. The data in this review on the metabolic mechanisms of sake yeasts and their genetic profiles will enable the development of future strains with superior phenotypes.

A widespread inversion polymorphism conserved among Saccharomyces species is caused by recurrent homogenization of a sporulation gene family

Saccharomyces genomes are highly collinear and show relatively little structural variation, both within and between species of this yeast genus. We investigated the only common inversion polymorphism known in S. cerevisiae, which affects a 24-kb 'flip/flop' region containing 15 genes near the centromere of chromosome XIV. The region exists in two orientations, called reference (REF) and inverted (INV). Meiotic recombination in this region is suppressed in crosses between REF and INV orientation strains such as the BY x RM cross. We find that the inversion polymorphism is at least 17 million years old because it is conserved across the genus Saccharomyces. However, the REF and INV isomers are not ancient alleles but are continually being re-created by re-inversion of the region within each species. Inversion occurs due to continual homogenization of two almost identical 4-kb sequences that form an inverted repeat (IR) at the ends of the flip/flop region. The IR consists of two pairs of genes that are specifically and strongly expressed during the late stages of sporulation. We show that one of these gene pairs, YNL018C/YNL034W, codes for a protein that is essential for spore formation. YNL018C and YNL034W are the founder members of a gene family, Centroid, whose members in other Saccharomycetaceae species evolve fast, duplicate frequently, and are preferentially located close to centromeres. We tested the hypothesis that Centroid genes are a meiotic drive system, but found no support for this idea.

Draft Genome Sequence of Saccharomyces cerevisiae DJJ01, Isolated from Dojoji Temple in Gobo, Wakayama, Japan

Saccharomyces cerevisiae strain DJJ01 was isolated from Dojoji Temple (Gobo, Wakayama, Japan) for development of local breweries. Here, we report the draft genome sequence of this strain to facilitate comparative genomic studies of yeast strains used for Japanese sake brewing.

Construction of a synthetic Saccharomyces cerevisiae pan-genome neo-chromosome

The Synthetic Yeast Genome Project (Sc2.0) represents the first foray into eukaryotic genome engineering and a framework for designing and building the next generation of industrial microbes. However, the laboratory strain S288c used lacks many of the genes that provide phenotypic diversity to industrial and environmental isolates. To address this shortcoming, we have designed and constructed a neo-chromosome that contains many of these diverse pan-genomic elements and which is compatible with the Sc2.0 design and test framework. The presence of this neo-chromosome provides phenotypic plasticity to the Sc2.0 parent strain, including expanding the range of utilizable carbon sources. We also demonstrate that the induction of programmable structural variation (SCRaMbLE) provides genetic diversity on which further adaptive gains could be selected. The presence of this neo-chromosome within the Sc2.0 backbone may therefore provide the means to adapt synthetic strains to a wider variety of environments, a process which will be vital to transitioning Sc2.0 from the laboratory into industrial applications.

The Sc2.0 consortia is reengineering the yeast genome. To expand the Sc2.0 genetic repertoire, the authors build a neo-chromosome comprising variable loci from diverse yeast isolates, providing phenotypic plasticity for use in synthetic backgrounds.

Visualising the next frontiers in wine yeast research

A range of game-changing biodigital and biodesign technologies are coming of age all around us, transforming our world in complex ways that are hard to predict. Not a day goes by without news of how data-centric engineering, algorithm-driven modelling, and biocyber technologies—including the convergence of artificial intelligence, machine learning, automated robotics, quantum computing, and genome editing—will change our world. If we are to be better at expecting the unexpected in the world of wine, we need to gain deeper insights into the potential and limitations of these technological developments and advances along with their promise and perils. This article anticipates how these fast-expanding bioinformational and biodesign toolkits might lead to the creation of synthetic organisms and model systems, and ultimately new understandings of biological complexities could be achieved. A total of four future frontiers in wine yeast research are discussed in this article: the construction of fully synthetic yeast genomes, including minimal genomes; supernumerary pan-genome neochromosomes; synthetic metagenomes; and synthetic yeast communities. These four concepts are at varying stages of development with plenty of technological pitfalls to overcome before such model chromosomes, genomes, strains, and yeast communities could illuminate some of the ill-understood aspects of yeast resilience, fermentation performance, flavour biosynthesis, and ecological interactions in vineyard and winery settings. From a winemaker's perspective, some of these ideas might be considered as far-fetched and, as such, tempting to ignore. However, synthetic biologists know that by exploring these futuristic concepts in the laboratory could well forge new research frontiers to deepen our understanding of the complexities of consistently producing fine wines with different fermentation processes from distinctive viticultural terroirs. As the saying goes in the disruptive technology industry, it take years to create an overnight success. The purpose of this article is neither to glorify any of these concepts as a panacea to all ills nor to crucify them as a danger to winemaking traditions. Rather, this article suggests that these proposed research endeavours deserve due consideration because they are likely to cast new light on the genetic blind spots of wine yeasts, and how they interact as communities in vineyards and wineries. Future-focussed research is, of course, designed to be subject to revision as new data and technologies become available. Successful dislodging of old paradigms with transformative innovations will require open-mindedness and pragmatism, not dogmatism—and this can make for a catch-22 situation in an archetypal traditional industry, such as the wine industry, with its rich territorial and socio-cultural connotations.

Metataxonomic Analysis of Grape Microbiota During Wine Fermentation Reveals the Distinction of Cyprus Regional terroirs

Wine production in Cyprus has strong cultural ties with the island's tradition, influencing local and foreign consumers' preferences and contributing significantly to Cyprus' economy. A key contributor to wine quality and sensorial characteristics development is the microbiota that colonizes grapes and performs alcoholic fermentation. Still, the microbial patterns of wines produced in different geographic regions (terroir) in Cyprus remain unknown. The present study investigated the microbial diversity of five terroirs in Cyprus, two from the PGI Lemesos region [Kyperounta (PDO Pitsilia) and Koilani (PDO Krasochoria)], and three from the PGI Pafos region [Kathikas (PDO Laona Akamas), Panayia, and Statos (PDO Panayia)], of two grape varieties, Xynisteri and Maratheftiko, using high-throughput amplicon sequencing. Through a longitudinal analysis, we examined the evolution of the bacterial and fungal diversity during spontaneous alcoholic fermentation. Both varieties were characterized by a progressive reduction in their fungal alpha diversity (Shannon index) throughout the process of fermentation. Additionally, the study revealed a distinct separation among different terroirs in total fungal community composition (beta-diversity) for the variety Xynisteri. Also, Kyperounta terroir had a distinct total fungal beta-diversity from the other terroirs for Maratheftiko. Similarly, a significant distinction was demonstrated in total bacterial diversity between the PGI Lemesos region and the PGI Pafos terroirs for grape juice of the variety Xynisteri. Pre-fermentation, the fungal diversity for Xynisteri and Maratheftiko was dominated by the genera Hanseniaspora, Aureobasidium, Erysiphe, Aspergillus, Stemphylium, Penicillium, Alternaria, Cladosporium, and Mycosphaerella. During and post-fermentation, the species Hanseniaspora nectarophila, Saccharomyces cerevisiae, Hanseniaspora guilliermondii, and Aureobasidium pullulans, became the predominant in most must samples. Regarding the bacterial diversity, Lactobacillus and Streptococcus were the predominant genera for both grape varieties in all stages of fermentation. During fermentation, an increase was observed in the relative abundance of some bacteria, such as Acetobacter, Gluconobacter, and Oenococcus oeni. Finally, the study revealed microbial biomarkers with statistically significant higher relative representation, associated with each geographic region and each grape variety, during the different stages of fermentation. The present study's findings provide an additional linkage between the grape microbial community and the wine terroir.

Breeding sake yeast and identification of mutation patterns by synchrotron light irradiation

Sake yeast is one of the important factors that characterize the aroma and taste of sake. To obtain sake yeast strains with different metabolic capabilities from other strains, breeding of a sake yeast is an effective way. In this study, sake yeast strain Y5201 was mutagenized by synchrotron light irradiation to obtain the mutant strains showing different brewing characteristics from parental strain Y5201, and comparative genome analysis between strain Y5201 and mutant strains was performed to identify mutation points and patterns induced by synchrotron light irradiation. Screening with the drug-resistant and fermentation tests selected the nine mutants (C18, C19, C29, C50, C51, C52, C54, T25, and T49) from the mutagenized Y5201 cells. Principal component analysis results based on the analysis of the small-scale brewing test metabolites showed that the mutant strain C19 was different from other strains, which had higher productivity of ethyl caproate and isoamyl acetate than those of the Y5201. Comparative genome analysis revealed that mutants by synchrotron light irradiation had a higher diversity of single nucleotide substitutions and a higher frequency of Indel (insertion/deletion) in these DNA than ethyl methanesulfonate and UV irradiation. These results suggest that synchrotron light irradiation is an effective and unique mutagen for yeast breeding.

Recombination in a sterile polyploid hybrid yeast upon meiotic Return-To-Growth

The sustainable future of food industry and consumer demands meet the need to generate out-performing new yeast variants. This is addressed by using the natural yeast diversity and breeding via sexual reproduction but the recovery of recombined spores in many industrial strains is limited. To circumvent this drawback, we examined whether or not the process of meiotic Return to Growth (RTG) that allows S. cerevisiae diploid cells to initiate meiotic recombination genome-wide and then re-enter into mitosis, will be effective to generate recombinants in a sterile and polyploid baking yeast strain (CNCM). We proceeded in four steps. First, whole genome sequencing of the CNCM strain revealed that it was an unbalanced polymorphic triploid. Second, we annotated a panel of genes likely involved in the success of the RTG process. Third, we examined the strain progression into sporulation and fourth, we developed an elutriation and reiterative RTG protocol that allowed to generate extensive libraries of recombinant RTGs, enriched up to 70 %. Altogether, the genome analysis of 122 RTG cells demonstrated that they were bona fide RTG recombinants since the vast majority retained the parental ploidy and exhibited allelic variations involving 1-60 recombined regions per cell with a length of ∼0.4-400 kb. Thus, beyond diploid laboratory strains, we demonstrated the proficiency of this natural non-GM and marker-free process to recombine a sterile and polyploid hybrid yeast, thus providing an unprecedented resource to screen improved traits.

Mutation in gene coding for glucose-induced degradation-deficient protein contributes to high malate production in yeast strain No. 28 and No. 77 used for industrial brewing of sake

Saccharomyces cerevisiae produces organic acids including malate during alcohol fermentation. Since malate contributes to the pleasant flavor of sake, high-malate-producing yeast strain No. 28 and No. 77 have been developed by the Brewing Society of Japan. In this study, the genes responsible for the high malate phenotype in these strains were investigated. We had previously found that the deletion of components of the glucose-induced degradation-deficient (GID) complex led to high malate production in yeast. Upon examining GID protein-coding genes in yeast strain No. 28 and No. 77, a nonsense homozygous mutation of GID4 in strain No. 28 and of GID2 in strain No. 77 were identified as the cause of high malate production. Furthermore, complementary tests of these mutations indicated that the heterozygous nonsense mutation in GID2 was recessive. In contrast, the heterozygous nonsense mutation in GID4 was considered semidominant.

Genomic information of Kocuria isolates from sake brewing process

Bacteria belonging to the genus Kocuria were identified as bacteria peculiar to a sake brewery in Toyama, Japan. Comparison of the 16S rRNA gene sequences revealed two groups of Kocuria isolates. Among known species, one group was similar to K. koreensis (Kk type), and the other, K. uropygioeca (Ku type). We determined complete genomic DNA sequences from two isolates, TGY1120_3 and TGY1127_2, which belong to types Kk and Ku, respectively. Comparison of these genomic information showed that these isolates differ at the species level with different genomic characters. Isolate TGY1120_3 comprised one chromosome and three plasmids, and the same transposon coding region was located on two loci on the chromosome and one locus on one plasmid, suggesting that the genetic element may be transferred between the chromosome and plasmid. Isolate TGY1127_2 comprised one chromosome and one plasmid. This plasmid encoded an identical transposase coding region, strongly suggesting that the genetic element may be transferred between these different isolates through plasmids. These four plasmids carried a highly similar region, indicating that they share a common ancestor. Thus, these two isolates may form a community and exchange their genetic information during sake brewing.

Extra copy of the mitochondrial cytochrome-c peroxidase gene confers a pyruvate-underproducing characteristic of sake yeast through respiratory metabolism

The mechanism of pyruvate-underproduction of aneuploid sake yeast was investigated in this study. In our previous report, we revealed that an increase in chromosome XI decreases pyruvate productivity of sake yeast. In this report, we found that increased copy number of CCP1, which is located on chromosome XI and encodes cytochrome-c peroxidase, decreased the pyruvate productivity of sake yeasts. Introducing an extra copy of CCP1 activated respiratory metabolism governed by Hap4 and increased reactive oxygen species. Therefore, it was concluded that increased copy number of CCP1 on chromosome XI activated respiratory metabolism and decreased pyruvate levels in an aneuploid sake yeast. This is the first report that describes a mechanism underlying the improvement of brewery yeast by chromosomal aneuploidy.

Fungal evolution: cellular, genomic and metabolic complexity

The question of how phenotypic and genomic complexity are inter-related and how they are shaped through evolution is a central question in biology that historically has been approached from the perspective of animals and plants. In recent years, however, fungi have emerged as a promising alternative system to address such questions. Key to their ecological success, fungi present a broad and diverse range of phenotypic traits. Fungal cells can adopt many different shapes, often within a single species, providing them with great adaptive potential. Fungal cellular organizations span from unicellular forms to complex, macroscopic multicellularity, with multiple transitions to higher or lower levels of cellular complexity occurring throughout the evolutionary history of fungi. Similarly, fungal genomes are very diverse in their architecture. Deep changes in genome organization can occur very quickly, and these phenomena are known to mediate rapid adaptations to environmental changes. Finally, the biochemical complexity of fungi is huge, particularly with regard to their secondary metabolites, chemical products that mediate many aspects of fungal biology, including ecological interactions. Herein, we explore how the interplay of these cellular, genomic and metabolic traits mediates the emergence of complex phenotypes, and how this complexity is shaped throughout the evolutionary history of Fungi.

Tetrad analysis of sake yeast and identification of an RFLP marker for the absence of phenolic off-flavour production

Mating is a promising breeding method for industrial yeast. Although sake yeast has a low spore-formation ability, segregants exhibiting a mating type have been isolated from sake yeast K7. Here, we constructed zygotes from a cross between those segregants and a laboratory yeast strain. Because most sake and brewing yeast strains are prototrophs, we developed a PCR-based method to confirm that mating had taken place based on genome sequencing data and differences in nucleotide sequences between the two parental strains. The mated strain, termed S. cerevisiae MITOY123, showed restored spore-formation ability, unlike most sake and brewing yeast strains. By using the mated yeast strain MITOY123, it was possible to carry out tetrad analysis for the trait of the absence of off-flavour due to phenolic products such as 4-vinylguiacol (4-VG) in sake yeast K7. This tetrad analysis indicated that a single genetic region around the gene PAD1 is responsible for the absence of phenolic off-flavour in sake yeast K7. In order to aid the breeding of sake and brewing yeast strains by mating, we also identified a restriction fragment length polymorphism (RFLP) marker for the absence of phenolic off-flavour production in strains derived from sake yeast K7. Collectively, our data show that it is possible to breed new sake and brewing yeast strains by mating and to test for the absence of phenolic off-flavour production in resultant strains easily by RFLP analysis.

Cloning of the SPO11 gene that complements a meiotic recombination defect in sake yeast

Cross hybridization breeding of sake yeasts is hampered by difficulty in acquisition of haploid cells through sporulation. We previously demonstrated that typical sake yeast strains were defective in meiotic chromosome recombination, which caused poor sporulation and loss of spore viability. In this study, we screened a single copy plasmid genomic DNA library of the laboratory Saccharomyces cerevisiae GRF88 for genes that might complement the meiotic recombination defect of UTCAH-3, a strain derived from the sake yeast Kyokai no. 7 (K7). We identified the SPO11 gene of the laboratory strain (ScSPO11), encoding a meiosis-specific endonuclease that catalyzes DNA double-strand breaks required for meiotic recombination, as a gene that restored meiotic recombination and spore viability of UTCAH-3. K7SPO11 could not restore sporulation efficiency and spore viability of UTCAH-3 and a laboratory strain BY4743 spo11Δ/spo11Δ, indicating that K7SPO11 is not functional. Sequence analysis of the SPO11 genes of various Kyokai sake yeasts (K1, and K3-K10) revealed that the K7 group of sake yeasts (K6, K7, K9, and K10) had a mutual missense mutation (C73T) in addition to other three common mutations present in all Kyokai yeasts tested. ScSPO11^C73T created through in vitro mutagenesis could not restore spore viability of BY4743 spo11Δ/spo11Δ. On the other hand, K8SPO11, which have the three common mutations except for C73T could restore spore viability of BY4743 spo11Δ/spo11Δ. These results suggest that C73T might be a causative mutation of recombination defect in K7SPO11. Moreover, we found that the introduction of ScRIM15 restored sporulation efficiency but not spore viability.

Research advances on sake rice, koji, and sake yeast: A review

Sake is the national alcoholic beverage of Japan, and its history can be traced back more than 1300 years. With the development and maturity of the sake-brewing technique, a unique flavor and taste gradually formed, which led to its wide use in Japan and internationally. This paper reviews and discusses the research advances of sake rice, koji, and sake yeast. The various enzymes and involved genes of microbes in the rice koji, and the separation/breeding of sake yeasts are expounded particularly. Moreover, the fields where further research is required are presented. Therefore, this review presents recent comprehensive research details of sake's ingredients and the involved study perspectives.

Characteristic analysis of the fermentation and sporulation properties of the traditional sake yeast strain Hiroshima no.6

General sake yeasts (e.g., Kyokai no.7, K7) show high fermentation ability and low sporulation frequency. Former is related to stress-response defect due to the loss-of-function of MSN4 and RIM15. Later is mainly caused by low IME1 expression, leading to difficulty in breeding and genetic analysis. Sake yeast Hiroshima no.6 (H6), which had been applied for sake fermentation, has sporulation ability. However, its detailed properties have not been unveiled. Here we present that the fermentation ability of H6 is suitable for sake brewing, and the precursor of dimethyl trisulfide in sake from H6 is low. MSN4 but not RIM15 of H6 has the same mutation as K7. Our phylogenetic analysis indicated that H6 is closely related to the K7 group. Unlike K7, H6 showed normal sporulation frequency in a partially RIM15-dependent manner, and IME1 in H6 was expressed. H6 possesses excellent properties as a partner strain for breeding by crossing.

Membrane Fluidity of Saccharomyces cerevisiae from Huangjiu (Chinese Rice Wine) Is Variably Regulated by OLE1 To Offset the Disruptive Effect of Ethanol

An evolution and resequencing strategy was used to research the genetic basis of Saccharomyces cerevisiae BR20 (with 18 vol% ethanol tolerance) and the evolved strain F23 (with 25 vol% ethanol tolerance). Whole-genome sequencing and RNA sequencing (RNA-seq) indicated that the enhanced ethanol tolerance under 10 vol% ethanol could be attributed to amino acid metabolism, whereas 18 vol% ethanol tolerance was due to fatty acid metabolism. Ultrastructural analysis indicated that F23 exhibited better membrane integrity than did BR20 under ethanol stress. At low concentrations (<5 vol%), the partition of ethanol into the membrane increased the membrane fluidity, which had little effect on cell growth. However, the toxic effects of medium and high ethanol concentrations (5 to 20 vol%) tended to decrease the membrane fluidity. Under high ethanol stress (>10 vol%), the highly tolerant strain was able to maintain a relatively constant fluidity by increasing the content of unsaturated fatty acid (UFA), whereas less-tolerant strains show a continuous decrease in fluidity and UFA content. OLE1, which was identified as the only gene with a differential single-nucleotide polymorphism (SNP) mutation site related to fatty acid metabolism, was significantly changed in response to ethanol. The role of OLE1 in membrane fluidity was positively validated in its overexpressed transformants. Therefore, OLE1 lowered the rate of decline in membrane fluidity and thus enabled the yeast to better fight the deleterious effects of ethanol.IMPORTANCE Yeasts with superior ethanol tolerance are desirable for winemakers and wine industries. In our previous work, strain F23 was evolved with superior ethanol tolerance and fermentation activity to improve the flavor profiles of Chinese rice wine. Therefore, exploring the genomic variations and ethanol tolerance mechanism of strain F23 could contribute to an understanding of its effect on the flavor characteristics in the resulting Chinese rice wine. The cellular membrane plays a vital role in the ethanol tolerance of yeasts; however, how the membrane is regulated to fight the toxic effect of ethanol remains to be elucidated. This study suggests that the membrane fluidity is variably regulated by OLE1 to offset the disruptive effect of ethanol. Current work will help develop more ethanol-tolerant yeast strains for wine industries and contribute to a deep understanding of its high flavor-producing ability.

Fermentation innovation through complex hybridization of wild and domesticated yeasts

The most common fermented beverage, lager beer, is produced by interspecies hybrids of the brewing yeast Saccharomyces cerevisiae and its wild relative S. eubayanus. Lager-brewing yeasts are not the only example of hybrid vigour or heterosis in yeasts, but the full breadth of interspecies hybrids associated with human fermentations has received less attention. Here we present a comprehensive genomic analysis of 122 Saccharomyces hybrids and introgressed strains. These strains arose from hybridization events between two to four species. Hybrids with S. cerevisiae contributions originated from three lineages of domesticated S. cerevisiae, including the major wine-making lineage and two distinct brewing lineages. In contrast, the undomesticated parents of these interspecies hybrids were all from wild Holarctic or European lineages. Most hybrids have inherited a mitochondrial genome from a parent other than S. cerevisiae, which recent functional studies suggest could confer adaptation to colder temperatures. A subset of hybrids associated with crisp flavour profiles, including both lineages of lager-brewing yeasts, have inherited inactivated S. cerevisiae alleles of critical phenolic off-flavour genes and/or lost functional copies from the wild parent through multiple genetic mechanisms. These complex hybrids shed light on the convergent and divergent evolutionary trajectories of interspecies hybrids and their impact on innovation in lager brewing and other diverse fermentation industries.

Mechanism of high folate accumulation in a sake yeast other than Kyokai yeasts

Folates are important vitamins in human nutrition. Pressed sake cake, a brewing by-product of sake, is a rich dietary source of folates derived from sake yeast (Saccharomyces cerevisiae). The National Research Institute of Brewing investigated 106 samples of pressed sake cake and revealed that three samples containing large amounts of folates were produced by Km67 yeast derived from the house sake yeast strain of Kiku-Masamune sake brewery. In this study, we performed sake brewing tests using Km67 and Kyokai no. 7 group strains and confirmed that Km67 yeast contributed to the production of pressed sake cake containing large amounts of folates. To elucidate the mechanisms of high folate accumulation in Km67, we performed whole-genome sequence analysis in Km67 and then screened 10 folate-metabolizing genes showing different sequences in Km67 and K7 strains. By folate analysis of each gene-disrupted strain derived from strain BY4743, we also selected four genes having significant effects on folate content in yeast from 10 candidate genes. Folate analysis of gene-disrupted yeast strains complemented with either Km67-type genes or K7-type genes revealed that the Km67-type HMT1 gene was related to high folate accumulation not only in laboratory yeast but also in sake yeast. In this gene, Leu63Phe was present in the methyltransferase motif I of Hmt1p, which was essential for the methyltransferase activity of Hmt1p. Our results and previous reports suggested that the methyltransferase activity of Km67-Hmt1p was higher than that of K7-Hmt1p, leading to enhanced production and high accumulation of folates in Km67 yeast.

Adaptation of S. cerevisiae to Fermented Food Environments Reveals Remarkable Genome Plasticity and the Footprints of Domestication

The budding yeast Saccharomyces cerevisiae can be found in the wild and is also frequently associated with human activities. Despite recent insights into the phylogeny of this species, much is still unknown about how evolutionary processes related to anthropogenic niches have shaped the genomes and phenotypes of S. cerevisiae. To address this question, we performed population-level sequencing of 82 S. cerevisiae strains from wine, flor, rum, dairy products, bakeries, and the natural environment (oak trees). These genomic data enabled us to delineate specific genetic groups corresponding to the different ecological niches and revealed high genome content variation across the groups. Most of these strains, compared with the reference genome, possessed additional genetic elements acquired by introgression or horizontal transfer, several of which were population-specific. In addition, several genomic regions in each population showed evidence of nonneutral evolution, as shown by high differentiation, or of selective sweeps including genes with key functions in these environments (e.g., amino acid transport for wine yeast). Linking genetics to lifestyle differences and metabolite traits has enabled us to elucidate the genetic basis of several niche-specific population traits, such as growth on galactose for cheese strains. These data indicate that yeast has been subjected to various divergent selective pressures depending on its niche, requiring the development of customized genomes for better survival in these environments. These striking genome dynamics associated with local adaptation and domestication reveal the remarkable plasticity of the S. cerevisiae genome, revealing this species to be an amazing complex of specialized populations.

YHp as a highly stable, hyper-copy, hyper-expression plasmid constructed using a full 2-μm circle sequence in cir0 strains of Saccharomyces cerevisiae

In the yeast Saccharomyces cerevisiae, the yeast episomal plasmid (YEp), containing a partial sequence from a natural 2-μm plasmid, has been frequently used to induce high levels of gene expression. In this study, we used Japanese sake yeast natural cir0 strain as a host for constructing an entire 2-μm plasmid with an expression construct using the three-fragment gap-repair method without Escherichia coli manipulation. The 2-μm plasmid contains two long inverted repeats, which is problematic for the amplification by polymerase chain reaction. Therefore, we amplified it by dividing into two fragments, each containing a single repeat together with an overlapping sequence for homologous recombination. TDH3 promoter-driven yEmRFP (TDH3p-yEmRFP) and the URA3 were used as a reporter gene and a selection marker, respectively, and inserted at the 3' end of the RAF1 gene on the 2-μm plasmid. The three fragments were combined and used for the transformation of sake yeast cir0 ura3- strain. The resulting transformant colonies showed a red or purple coloration, which was significantly stronger than that of the cells transformed with YEp-TDH3p-yEmRFP. The 2-μm transformants were cultured in YPD medium and observed by fluorescence microscopy. Almost all cells showed strong fluorescence, suggesting that the plasmid was preserved during nonselective culture conditions. The constructed plasmid maintained a high copy state similar to that of the natural 2-μm plasmid, and the red fluorescent protein expression was 54 fold compared with the chromosomal integrant. This vector is named YHp, the Yeast Hyper expression plasmid.

Progress in the genomics and genome-wide study of sake yeast

Completion of the whole genome sequence of a laboratory yeast strain Saccharomyces cerevisiae in 1996 ushered in the development of genome-wide experimental tools and accelerated subsequent genetic study of S. cerevisiae. The study of sake yeast also shared the benefit of such tools as DNA microarrays, gene disruption-mutant collections, and others. Moreover, whole genome analysis of representative sake yeast strain Kyokai no. 7 was performed in the late 2000s, and enabled comparative genomics between sake yeast and laboratory yeast, resulting in some notable finding for of sake yeast genetics. Development of next-generation DNA sequencing and bioinformatics also drastically changed the field of the genetics, including for sake yeast. Genomics and the genome-wide study of sake yeast have progressed under these circumstances during the last two decades, and are summarized in this article. Abbreviations: AFLP: amplified fragment length polymorphism; CGH: comparative genomic hybridization; CNV: copy number variation; DMS: dimethyl succinate; DSW: deep sea water; LOH: loss of heterozygosity; NGS: next generation sequencer; QTL: quantitative trait loci; QTN: quantitative trait nucleotide; SAM: S-adenosyl methionine; SNV: single nucleotide variation.

Phenotypic evaluation and characterization of 21 industrial Saccharomyces cerevisiae yeast strains

Microorganisms have been studied and used extensively to produce value-added fuels and chemicals. Yeasts, specifically Saccharomyces cerevisiae, receive industrial attention because of their well-known ability to ferment glucose and produce ethanol. Thousands of natural or genetically modified S. cerevisiae have been found in industrial environments for various purposes. These industrial strains are isolated from industrial fermentation sites, and they are considered as potential host strains for superior fermentation processes. In many cases, industrial yeast strains have higher thermotolerance, increased resistances towards fermentation inhibitors and increased glucose fermentation rates under anaerobic conditions when compared with laboratory yeast strains. Despite the advantages of industrial strains, they are often not well characterized. Through screening and phenotypic characterization of commercially available industrial yeast strains, industrial fermentation processes requiring specific environmental conditions may be able to select an ideal starting yeast strain to be further engineered. Here, we have characterized and compared 21 industrial S. cerevisiae strains under multiple conditions, including their tolerance to varying pH conditions, resistance to fermentation inhibitors, sporulation efficiency and ability to ferment lignocellulosic sugars. These data may be useful for the selection of a parental strain for specific biotechnological applications of engineered yeast.

History, lineage and phenotypic differentiation of sake yeast

Sake yeast was first isolated as a single yeast strain, Saccharomyces sake, during the Meiji era. Yeast strains suitable for sake fermentation were subsequently isolated from sake brewers and distributed as Kyokai yeast strains. Sake yeast strains that produce characteristic flavors have been bred in response to various market demands and individual preferences. Interestingly, both genetic and morphological studies have indicated that sake yeast used during the Meiji era differs from new sake yeasts derived from Kyokai Strain No. 7 lineage. Here, we discuss the history of sake yeast breeding, from the discovery of sake yeast to the present day, to highlight the achievements of great Japanese scientists and engineers.

Nutrient Signaling via the TORC1-Greatwall-PP2AB55δ Pathway Is Responsible for the High Initial Rates of Alcoholic Fermentation in Sake Yeast Strains of Saccharomyces cerevisiae

Saccharomyces cerevisiae sake yeast strain Kyokai no. 7 (K7) and its relatives carry a homozygous loss-of-function mutation in the RIM15 gene, which encodes a Greatwall family protein kinase. Disruption of RIM15 in nonsake yeast strains leads to improved alcoholic fermentation, indicating that the defect in Rim15p is associated with the enhanced fermentation performance of sake yeast cells. In order to understand how Rim15p mediates fermentation control, we here focused on target-of-rapamycin protein kinase complex 1 (TORC1) and protein phosphatase 2A with the B55δ regulatory subunit (PP2A^B55δ), complexes that are known to act upstream and downstream of Rim15p, respectively. Several lines of evidence, including our previous transcriptomic analysis data, suggested enhanced TORC1 signaling in sake yeast cells during sake fermentation. Fermentation tests of the TORC1-related mutants using a laboratory strain revealed that TORC1 signaling positively regulates the initial fermentation rate in a Rim15p-dependent manner. Deletion of the CDC55 gene, encoding B55δ, abolished the high fermentation performance of Rim15p-deficient laboratory yeast and sake yeast cells, indicating that PP2A^B55δ mediates the fermentation control by TORC1 and Rim15p. The TORC1-Greatwall-PP2A^B55δ pathway similarly affected the fermentation rate in the fission yeast Schizosaccharomyces pombe, strongly suggesting that the evolutionarily conserved pathway governs alcoholic fermentation in yeasts. It is likely that elevated PP2A^B55δ activity accounts for the high fermentation performance of sake yeast cells. Heterozygous loss-of-function mutations in CDC55 found in K7-related sake strains may indicate that the Rim15p-deficient phenotypes are disadvantageous to cell survival.IMPORTANCE The biochemical processes and enzymes responsible for glycolysis and alcoholic fermentation by the yeast S. cerevisiae have long been the subject of scientific research. Nevertheless, the factors determining fermentation performance in vivo are not fully understood. As a result, the industrial breeding of yeast strains has required empirical characterization of fermentation by screening numerous mutants through laborious fermentation tests. To establish a rational and efficient breeding strategy, key regulators of alcoholic fermentation need to be identified. In the present study, we focused on how sake yeast strains of S. cerevisiae have acquired high alcoholic fermentation performance. Our findings provide a rational molecular basis to design yeast strains with optimal fermentation performance for production of alcoholic beverages and bioethanol. In addition, as the evolutionarily conserved TORC1-Greatwall-PP2A^B55δ pathway plays a major role in the glycolytic control, our work may contribute to research on carbohydrate metabolism in higher eukaryotes.

Histone deacetylases in sake yeast affect fermentation characteristics

Yeast histone deacetylases (HDAC) affect the production of alcoholic beverages. In this study, we evaluated the sake fermentation characteristics when using HDAC gene-disrupted yeast strain Kyokai No. 701. Flavor components of the sake product were significantly changed. RPD3 or HDA1 disruption increased twofold the amount of isoamyl acetate, and isoamyl alcohol levels also increased in the rpd3Δ strain. To determine the contribution of Rpd3L and Rpd3S complexes to sake characteristics, a gene responsible for Rpd3L and/or Rpd3S formation was also disrupted. Disruption of DEP1 or SDS3 that is an essential component of Rpd3L led to increased isoamyl alcohol production similar to that of the rpd3Δ strain, but the efficiency of isoamyl alcohol esterification was not affected. In addition, Rpd3 and Hda1 may regulate the responsiveness to oxygen in isoamyl acetate production. We conclude that HDAC genes regulate the production of flavor components during sake fermentation. Abbreviations: HDAC: Histone deacetylase; HAT: histone acetyltransferase; K701: sake yeast Kyokai No. 701; PCR: polymerase chain reaction; HPLC: high performance liquid chromatography; E/A: Ester/Alcohol; BCAA: branched chain-amino acid; Atf: alcohol acetyltransferase.

Diversity analysis of Saccharomyces cerevisiae isolated from natural sources by multilocus sequence typing (MLST)

We used multilocus sequence typing (MLST) to analyze the diversity of natural isolates of Saccharomyces cerevisiae, the most important microorganism in alcoholic fermentation. Six loci, ADP1, RPN2, GLN4, ACC1, MET4, and NUP116, in S. cerevisiae genome were selected as MLST markers. To investigate genetic diversity within S. cerevisiae, 42 S. cerevisiae isolated from natural sources in Korea as well as six S. cerevisiae obtained from Genbank and four industrial S. cerevisiae were examined using MLST. Twenty-six polymorphic sites were found in the six loci. Among them, ACC1 had the most genetic variation with eight polymorphic sites. MLST differentiated the 52 strains into three clades. Alcohol fermentation results revealed that S. cerevisiae in Clade III produced less alcohol than those in Clades I and II. These results suggested that MLST is a powerful tool to differentiate S. cerevisiae and can potentially be used to select S. cerevisiae suitable for industrial use.

Agmatine Production by Aspergillus oryzae Is Elevated by Low pH during Solid-State Cultivation

Sake (rice wine) produced by multiple parallel fermentation (MPF) involving Aspergillus oryzae (strain RW) and Saccharomyces cerevisiae under solid-state cultivation conditions contained 3.5 mM agmatine, while that produced from enzymatically saccharified rice syrup by S. cerevisiae contained <0.01 mM agmatine. Agmatine was also produced in ethanol-free rice syrup prepared with A. oryzae under solid-state cultivation (3.1 mM) but not under submerged cultivation, demonstrating that A. oryzae in solid-state culture produces agmatine. The effect of cultivation conditions on agmatine production was examined. Agmatine production was boosted at 30°C and reached the highest level (6.3 mM) at pH 5.3. The addition of l-lactic, succinic, and citric acids reduced the initial culture pHs to 3.0, 3.5, and 3.2, respectively, resulting in a further increase in agmatine accumulation (8.2, 8.7, and 8.3 mM, respectively). Homogenate from a solid-state culture exhibited a maximum l-arginine decarboxylase (ADC) activity (74 pmol · min^-1 · μg^-1) at pH 3.0 at 30°C; homogenate from a submerged culture exhibited an extremely low activity (<0.3 pmol · min^-1 · μg^-1) under all conditions tested. These observations indicated that efficient agmatine production in ethanol-free rice syrup is achieved by an unidentified low-pH-dependent ADC induced during solid-state cultivation of A. oryzae, even though A. oryzae lacks ADC orthologs and instead possesses four ornithine decarboxylases (ODC1 to ODC4). Recombinant ODC1 and ODC2 exhibited no ADC activity at acidic pH (pH < 4.0), suggesting that other decarboxylases or an unidentified ADC is involved in agmatine production.IMPORTANCE It has been speculated that, in general, fungi do not synthesize agmatine from l-arginine because they do not possess genes encoding arginine decarboxylase. Numerous preclinical studies have shown that agmatine exerts pleiotropic effects on various molecular targets, leading to an improved quality of life. In the present study, we first demonstrated that l-arginine was a feasible substrate for agmatine production by the fungus Aspergillus oryzae RW. We observed that the productivity of agmatine by A. oryzae RW was elevated at low pH only during solid-state cultivation. A. oryzae is utilized in the production of various Asian fermented foods. The saccharification conditions optimized in the current study could be employed not only in the production of an agmatine-containing ethanol-free rice syrup but also in the production of many types of fermented foods, such as soy sauce (shoyu), rice vinegar, etc., as well as for use as novel therapeutic agents and nutraceuticals.

MAL73, a novel regulator of maltose fermentation, is functionally impaired by single nucleotide polymorphism in sake brewing yeast

For maltose fermentation, budding yeast Saccharomyces cerevisiae operates a mechanism that involves transporters (MALT), maltases (MALS) and regulators (MALR) collectively known as MAL genes. However, functional relevance of MAL genes during sake brewing process remains largely elusive, since sake yeast is cultured under glucose-rich condition achieved by the co-culture partner Aspergillus spp.. Here we isolated an ethyl methane sulfonate (EMS)-mutagenized sake yeast strain exhibiting enhanced maltose fermentation compared to the parental strain. The mutant carried a single nucleotide insertion that leads to the extension of the C-terminal region of a previously uncharacterized MALR gene YPR196W-2, which was renamed as MAL73. Introduction of the mutant allele MAL73L with extended C-terminal region into the parental or other sake yeast strains enhanced the growth rate when fed with maltose as the sole carbon source. In contrast, disruption of endogenous MAL73 in the sake yeasts decreased the maltose fermentation ability of sake yeast, confirming that the original MAL73 functions as a MALR. Importantly, the MAL73L-expressing strain fermented more maltose in practical condition compared to the parental strain during sake brewing process. Our data show that MAL73(L) is a novel MALR gene that regulates maltose fermentation, and has been functionally attenuated in sake yeast by single nucleotide deletion during breeding history. Since the MAL73L-expressing strain showed enhanced ability of maltose fermentation, MAL73L might also be a valuable tool for enhancing maltose fermentation in yeast in general.

A study on the use of strain-specific and homologous promoters for heterologous expression in industrial Saccharomyces cerevisiae strains

Polymorphism is well known in Saccharomyces cerevisiae strains used for different industrial applications, however little is known about its effects on promoter efficiency. In order to test this, five different promoters derived from an industrial and a laboratory (S288c) strain were used to drive the expression of eGFP reporter gene in both cells. The ADH1 promoter (P_ADH1) in particular, which showed more polymorphism among the promoters analyzed, also exhibited the highest differences in intracellular fluorescence production. This was further confirmed by Northern blot analysis. The same behavior was also observed when the gene coding for secreted α-amylase from Cryptococcus flavus was placed under the control of either P_ADH1. These results underline the importance of the careful choice of the source of the promoter to be used in industrial yeast strains for heterologous expression.

Genome Sequence of the Self-Flocculating Strain Saccharomyces cerevisiae SPSC01

The self-flocculation of yeast cells presents advantages for continuous ethanol fermentation such as their self-immobilization within fermenters for high density to improve ethanol productivity and cost-effective biomass recovery by gravity sedimentation. We sequenced and analyzed the genome of the self-flocculating Saccharomyces cerevisiae SPSC01 for the industrial production of fuel ethanol.

Whole-Genome Analysis of Three Yeast Strains Used for Production of Sherry-Like Wines Revealed Genetic Traits Specific to Flor Yeasts

Flor yeast strains represent a specialized group of Saccharomyces cerevisiae yeasts used for biological wine aging. We have sequenced the genomes of three flor strains originated from different geographic regions and used for production of sherry-like wines in Russia. According to the obtained phylogeny of 118 yeast strains, flor strains form very tight cluster adjacent to the main wine clade. SNP analysis versus available genomes of wine and flor strains revealed 2,270 genetic variants in 1,337 loci specific to flor strains. Gene ontology analysis in combination with gene content evaluation revealed a complex landscape of possibly adaptive genetic changes in flor yeast, related to genes associated with cell morphology, mitotic cell cycle, ion homeostasis, DNA repair, carbohydrate metabolism, lipid metabolism, and cell wall biogenesis. Pangenomic analysis discovered the presence of several well-known "non-reference" loci of potential industrial importance. Events of gene loss included deletions of asparaginase genes, maltose utilization locus, and FRE-FIT locus involved in iron transport. The latter in combination with a flor-yeast-specific mutation in the Aft1 transcription factor gene is likely to be responsible for the discovered phenotype of increased iron sensitivity and improved iron uptake of analyzed strains. Expansion of the coding region of the FLO11 flocullin gene and alteration of the balance between members of the FLO gene family are likely to positively affect the well-known propensity of flor strains for velum formation. Our study provides new insights in the nature of genetic variation in flor yeast strains and demonstrates that different adaptive properties of flor yeast strains could have evolved through different mechanisms of genetic variation.

Complete genome sequence and analysis of the industrial Saccharomyces cerevisiae strain N85 used in Chinese rice wine production

Chinese rice wine is a popular traditional alcoholic beverage in China, while its brewing processes have rarely been explored. We herein report the first gapless, near-finished genome sequence of the yeast strain Saccharomyces cerevisiae N85 for Chinese rice wine production. Several assembly methods were used to integrate Pacific Bioscience (PacBio) and Illumina sequencing data to achieve high-quality genome sequencing of the strain. The genome encodes more than 6,000 predicted proteins, and 238 long non-coding RNAs, which are validated by RNA-sequencing data. Moreover, our annotation predicts 171 novel genes that are not present in the reference S288c genome. We also identified 65,902 single nucleotide polymorphisms and small indels, many of which are located within genic regions. Dozens of larger copy-number variations and translocations were detected, mainly enriched in the subtelomeres, suggesting these regions may be related to genomic evolution. This study will serve as a milestone in studying of Chinese rice wine and related beverages in China and in other countries. It will help to develop more scientific and modern fermentation processes of Chinese rice wine, and explore metabolism pathways of desired and harmful components in Chinese rice wine to improve its taste and nutritional value.

Genetic characterization and modification of a bioethanol-producing yeast strain

Yeast Saccharomyces cerevisiae strains isolated from different sources generally show extensive genetic and phenotypic diversity. Understanding how genomic variations influence phenotypes is important for developing strategies with improved economic traits. The diploid S. cerevisiae strain NY1308 is used for cellulosic bioethanol production. Whole genome sequencing identified an extensive amount of single nucleotide variations and small insertions/deletions in the genome of NY1308 compared with the S288c genome. Gene annotation of the assembled NY1308 genome showed that 43 unique genes are absent in the S288c genome. Phylogenetic analysis suggested most of the unique genes were obtained through horizontal gene transfer from other species. RNA-Seq revealed that some unique genes were not functional in NY1308 due to unidentified intron sequences. During bioethanol fermentation, NY1308 tends to flocculate when certain inhibitors (derived from the pretreatment of cellulosic feedstock) are present in the fermentation medium. qRT-PCR and genetic manipulation confirmed that the novel gene, NYn43, contributed to the flocculation ability of NY1308. Deletion of NYn43 resulted in a faster fermentation rate for NY1308. This work disclosed the genetic characterization of a bioethanol-producing S. cerevisiae strain and provided a useful paradigm showing how the genetic diversity of the yeast population would facilitate the personalized development of desirable traits.