Folded HasA inhibits its own secretion through its ABC exporter

Redefining the bacterial Type I protein secretion system

Type I secretion systems (T1SS) are versatile molecular machines for protein transport across the Gram-negative cell envelope. The archetypal Type I system mediates secretion of the Escherichia coli hemolysin, HlyA. This system has remained the pre-eminent model of T1SS research since its discovery. The classic description of a T1SS is composed of three proteins: an inner membrane ABC transporter, a periplasmic adaptor protein and an outer membrane factor. According to this model, these components assemble to form a continuous channel across the cell envelope, an unfolded substrate molecule is then transported in a one-step mechanism, directly from the cytosol to the extracellular milieu. However, this model does not encapsulate the diversity of T1SS that have been characterized to date. In this review, we provide an updated definition of a T1SS, and propose the subdivision of this system into five subgroups. These subgroups are categorized as T1SSa for RTX proteins, T1SSb for non-RTX Ca²⁺-binding proteins, T1SSc for non-RTX proteins, T1SSd for class II microcins, and T1SSe for lipoprotein secretion. Although often overlooked in the literature, these alternative mechanisms of Type I protein secretion offer many avenues for biotechnological discovery and application.

Structure, Assembly, and Function of Tripartite Efflux and Type 1 Secretion Systems in Gram-Negative Bacteria

Tripartite efflux pumps and the related type 1 secretion systems (T1SSs) in Gram-negative organisms are diverse in function, energization, and structural organization. They form continuous conduits spanning both the inner and the outer membrane and are composed of three principal components-the energized inner membrane transporters (belonging to ABC, RND, and MFS families), the outer membrane factor channel-like proteins, and linking the two, the periplasmic adaptor proteins (PAPs), also known as the membrane fusion proteins (MFPs). In this review we summarize the recent advances in understanding of structural biology, function, and regulation of these systems, highlighting the previously undescribed role of PAPs in providing a common architectural scaffold across diverse families of transporters. Despite being built from a limited number of basic structural domains, these complexes present a staggering variety of architectures. While key insights have been derived from the RND transporter systems, a closer inspection of the operation and structural organization of different tripartite systems reveals unexpected analogies between them, including those formed around MFS- and ATP-driven transporters, suggesting that they operate around basic common principles. Based on that we are proposing a new integrated model of PAP-mediated communication within the conformational cycling of tripartite systems, which could be expanded to other types of assemblies.

Engineering High-Yield Biopolymer Secretion Creates an Extracellular Protein Matrix for Living Materials

The bacterial extracellular matrix forms autonomously, giving rise to complex material properties and multicellular behaviors. Synthetic matrix analogues can replicate these functions but require exogenously added material or have limited programmability. Here, we design a two-strain bacterial system that self-synthesizes and structures a synthetic extracellular matrix of proteins. We engineered Caulobacter crescentus to secrete an extracellular matrix protein composed of an elastin-like polypeptide (ELP) hydrogel fused to supercharged SpyCatcher [SC^(-)]. This biopolymer was secreted at levels of 60 mg/liter, an unprecedented level of biomaterial secretion by a native type I secretion apparatus. The ELP domain was swapped with either a cross-linkable variant of ELP or a resilin-like polypeptide, demonstrating this system is flexible. The SC^(-)-ELP matrix protein bound specifically and covalently to the cell surface of a C. crescentus strain that displays a high-density array of SpyTag (ST) peptides via its engineered surface layer. Our work develops protein design guidelines for type I secretion in C. crescentus and demonstrates the autonomous secretion and assembly of programmable extracellular protein matrices, offering a path forward toward the formation of cohesive engineered living materials.IMPORTANCE Engineered living materials (ELM) aim to mimic characteristics of natural occurring systems, bringing the benefits of self-healing, synthesis, autonomous assembly, and responsiveness to traditional materials. Previous research has shown the potential of replicating the bacterial extracellular matrix (ECM) to mimic biofilms. However, these efforts require energy-intensive processing or have limited tunability. We propose a bacterially synthesized system that manipulates the protein content of the ECM, allowing for programmable interactions and autonomous material formation. To achieve this, we engineered a two-strain system to secrete a synthetic extracellular protein matrix (sEPM). This work is a step toward understanding the necessary parameters to engineering living cells to autonomously construct ELMs.

Structure-Function Relationships of the Repeat Domains of RTX Toxins

RTX proteins are a large family of polypeptides of mainly Gram-negative origin that are secreted into the extracellular medium by a type I secretion system featuring a non-cleavable C-terminal secretion signal, which is preceded by a variable number of nine-residue tandem repeats. The three-dimensional structure forms a parallel β-roll, where β-strands of two parallel sheets are connected by calcium-binding linkers in such a way that a right-handed spiral is built. The Ca²⁺ ions are an integral part of the structure, which cannot form without them. The structural determinants of this unique architecture will be reviewed with its conservations and variations together with the implication for secretion and folding of these proteins. The general purpose of the RTX domains appears to act as an internal chaperone that keeps the polypeptide unfolded in the calcium-deprived cytosol and triggers folding in the calcium-rich extracellular medium. A rather recent addition to the structural biology of the RTX toxin is a variant occurring in a large RTX adhesin, where this non-canonical β-roll binds to ice and diatoms.

Complex Multilevel Control of Hemolysin Production by Uropathogenic Escherichia coli

Uropathogenic E. coli (UPEC) is the major cause of urinary tract infections and a frequent cause of sepsis. Nearly half of all UPEC strains produce the potent cytotoxin hemolysin, and its expression is associated with enhanced virulence. In this study, we explored hemolysin variation within the globally dominant UPEC ST131 clone, finding that strains from the ST131 sublineage with the greatest multidrug resistance also possess the strongest hemolytic activity. We also employed an innovative forward genetic screen to define the set of genes required for hemolysin production. Using this approach, and subsequent targeted mutagenesis and complementation, we identified new hemolysin-controlling elements involved in LPS inner core biosynthesis and cytoplasmic chaperone activity, and we show that mechanistically they are required for hemolysin secretion. These original discoveries substantially enhance our understanding of hemolysin regulation, secretion and function.

Uropathogenic Escherichia coli (UPEC) is the major cause of urinary tract infections. Nearly half of all UPEC strains secrete hemolysin, a cytotoxic pore-forming toxin. Here, we show that the prevalence of the hemolysin toxin gene (hlyA) is highly variable among the most common 83 E. coli sequence types (STs) represented on the EnteroBase genome database. To explore this diversity in the context of a defined monophyletic lineage, we contextualized sequence variation of the hlyCABD operon within the genealogy of the globally disseminated multidrug-resistant ST131 clone. We show that sequence changes in hlyCABD and its newly defined 1.616-kb-long leader sequence correspond to phylogenetic designation, and that ST131 strains with the strongest hemolytic activity belong to the most extensive multidrug-resistant sublineage (clade C2). To define the set of genes involved in hemolysin production, the clade C2 strain S65EC was completely sequenced and subjected to a genome-wide screen by combining saturated transposon mutagenesis and transposon-directed insertion site sequencing with the capacity to lyse red blood cells. Using this approach, and subsequent targeted mutagenesis and complementation, 13 genes were confirmed to be specifically required for production of active hemolysin. New hemolysin-controlling elements included discrete sets of genes involved in lipopolysaccharide (LPS) inner core biosynthesis (waaC, waaF, waaG, and rfaE) and cytoplasmic chaperone activity (dnaK and dnaJ), and we show these are required for hemolysin secretion. Overall, this work provides a unique description of hemolysin sequence diversity in a single clonal lineage and describes a complex multilevel system of regulatory control for this important toxin.

ATP Binding Cassette Transporter A1 is Involved in Extracellular Secretion of Acetylated APE1/Ref-1

Acetylation of nuclear apurinic/apyrimidinic endonuclease-1/redox factor-1 (APE1/Ref-1) is associated with its extracellular secretion, despite the lack of an N-terminal protein secretion signal. In this study, we investigated plasma membrane targeting and translocation of APE1/Ref-1 in HEK293T cells with enhanced acetylation. While APE1/Ref-1 targeting was not affected by inhibition of the endoplasmic reticulum/Golgi-dependent secretion, its secretion was reduced by inhibitors of ATP-binding cassette (ABC) transporters, and siRNA-mediated down-regulation of ABC transporter A1. The association between APE1/Ref-1 and ABCA1 transporter was confirmed by proximal ligation assay and immunoprecipitation experiments. An APE1/Ref-1 construct with mutated acetylation sites (K6/K7R) showed reduced co-localization with ABC transporter A1. Exposure of trichostatin A (TSA) induced the acetylation of APE1/Ref-1, which translocated into membrane fraction. Taken together, acetylation of APE1/Ref-1 is considered to be necessary for its extracellular targeting via non-classical secretory pathway using the ABCA1 transporter.

Structure and mechanism of bacterial tripartite efflux pumps

Efflux pumps are membrane proteins which contribute to multi-drug resistance. In Gram-negative bacteria, some of these pumps form complex tripartite assemblies in association with an outer membrane channel and a periplasmic membrane fusion protein. These tripartite machineries span both membranes and the periplasmic space, and they extrude from the bacterium chemically diverse toxic substrates. In this chapter, we summarise current understanding of the structural architecture, functionality, and regulation of tripartite multi-drug efflux assemblies.

The Sec System: Protein Export in Escherichia coli

In Escherichia coli, proteins found in the periplasm or the outer membrane are exported from the cytoplasm by the general secretory, Sec, system before they acquire stably folded structure. This dynamic process involves intricate interactions among cytoplasmic and membrane proteins, both peripheral and integral, as well as lipids. In vivo, both ATP hydrolysis and proton motive force are required. Here, we review the Sec system from the inception of the field through early 2016, including biochemical, genetic, and structural data.

Structure of a Type-1 Secretion System ABC Transporter

Type-1 secretion systems (T1SSs) represent a widespread mode of protein secretion across the cell envelope in Gram-negative bacteria. The T1SS is composed of an inner-membrane ABC transporter, a periplasmic membrane-fusion protein, and an outer-membrane porin. These three components assemble into a complex spanning both membranes and providing a conduit for the translocation of unfolded polypeptides. We show that ATP hydrolysis and assembly of the entire T1SS complex is necessary for protein secretion. Furthermore, we present a 3.15-Å crystal structure of AaPrtD, the ABC transporter found in the Aquifex aeolicus T1SS. The structure suggests a substrate entry window just above the transporter's nucleotide binding domains. In addition, highly kinked transmembrane helices, which frame a narrow channel not observed in canonical peptide transporters, are likely involved in substrate translocation. Overall, the AaPrtD structure supports a polypeptide transport mechanism distinct from alternating access.

Type I Protein Secretion-Deceptively Simple yet with a Wide Range of Mechanistic Variability across the Family

A very large type I polypeptide begins to reel out from a ribosome; minutes later, the still unidentifiable polypeptide, largely lacking secondary structure, is now in some cases a thousand or more residues longer. Synthesis of the final hundred C-terminal residues commences. This includes the identity code, the secretion signal within the last 50 amino acids, designed to dock with a waiting ATP binding cassette (ABC) transporter. What happens next is the subject of this review, with the main, but not the only focus on hemolysin HlyA, an RTX protein toxin secreted by the type I system. Transport substrates range from small peptides to giant proteins produced by many pathogens. These molecules, without detectable cellular chaperones, overcome enormous barriers, crossing two membranes before final folding on the cell surface, involving a unique autocatalytic process.Unfolded HlyA is extruded posttranslationally, C-terminal first. The transenvelope "tunnel" is formed by HlyB (ABC transporter), HlyD (membrane fusion protein) straddling the inner membrane and periplasm and TolC (outer membrane). We present a new evaluation of the C-terminal secretion code, and the structure function of HlyD and HlyB at the heart of this nanomachine. Surprisingly, key details of the secretion mechanism are remarkably variable in the many type I secretion system subtypes. These include alternative folding processes, an apparently distinctive secretion code for each type I subfamily, and alternative forms of the ABC transporter; most remarkably, the ABC protein probably transports peptides or polypeptides by quite different mechanisms. Finally, we suggest a putative structure for the Hly-translocon, HlyB, the multijointed HlyD, and the TolC exit.

Directionality of substrate translocation of the hemolysin A Type I secretion system

Type 1 secretion systems (T1SS) of Gram-negative bacteria are responsible for the secretion of various proteases, lipases, S-layer proteins or toxins into the extracellular space. The paradigm of these systems is the hemolysin A (HlyA) T1SS of Escherichia coli. This multiple membrane protein complex is able to secrete the toxin HlyA in one step across both E. coli membranes. Common to all secreted T1SS substrates is a C-terminal secretion sequence being necessary as well as sufficient for secretion. However, it is not known whether transport occurs directionally, i.e. the N- or the C-terminus of T1SS substrates is secreted first. We have addressed this question by constructing HlyA fusions with the rapidly folding eGFP resulting in a stalled T1SS. Differential labeling and subsequent fluorescence microscopic detection of C- and N-terminal parts of the fusions allowed us to demonstrate vectorial transport of HlyA through the T1SS with the C-terminus appearing first outside the bacterial cells.

A sequence-based two-level method for the prediction of type I secreted RTX proteins

Many Gram-negative bacteria use the type I secretion system (T1SS) to translocate a wide range of substrates (type I secreted RTX proteins, T1SRPs) from the cytoplasm across the inner and outer membrane in one step to the extracellular space. Since T1SRPs play an important role in pathogen-host interactions, identifying them is crucial for a full understanding of the pathogenic mechanism of T1SS. However, experimental identification is often time-consuming and expensive. In the post-genomic era, it becomes imperative to predict new T1SRPs using information from the amino acid sequence alone when new proteins are being identified in a high-throughput mode. In this study, we report a two-level method for the first attempt to identify T1SRPs using sequence-derived features and the random forest (RF) algorithm. At the full-length sequence level, the results show that the unique feature of T1SRPs is the presence of variable numbers of the calcium-binding RTX repeats. These RTX repeats have a strong predictive power and so T1SRPs can be well distinguished from non-T1SRPs. At another level, different from that of the secretion signal, we find that a sequence segment located at the last 20-30 C-terminal amino acids may contain important signal information for T1SRP secretion because obvious differences were shown between the corresponding positions of T1SRPs and non-T1SRPs in terms of amino acid and secondary structure compositions. Using five-fold cross-validation, overall accuracies of 97% at the full-length sequence level and 89% at the secretion signal level were achieved through feature evaluation and optimization. Benchmarking on an independent dataset, our method could correctly predict 63 and 66 of 74 T1SRPs at the full-length sequence and secretion signal levels, respectively. We believe that this study will be useful in elucidating the secretion mechanism of T1SS and facilitating hypothesis-driven experimental design and validation.

Large-scale evolutionary analyses on SecB subunits of bacterial sec system

Protein secretion systems are extremely important in bacteria because they are involved in many fundamental cellular processes. Of the various secretion systems, the Sec system is composed of seven different subunits in bacteria, and subunit SecB brings secreted preproteins to subunit SecA, which with SecYEG and SecDF forms a complex for the translocation of secreted preproteins through the inner membrane. Because of the wide existence of Sec system across bacteria, eukaryota, and archaea, each subunit of the Sec system has a complicated evolutionary relationship. Until very recently, 5,162 SecB sequences have been documented in UniProtKB, however no phylogenetic study has been conducted on a large sampling of SecBs from bacterial Sec secretion system, and no statistical study has been conducted on such size of SecBs in order to exhaustively investigate their variances of pairwise p-distance along taxonomic lineage from kingdom to phylum, to class, to order, to family, to genus and to organism. To fill in these knowledge gaps, 3,813 bacterial SecB sequences with full taxonomic lineage from kingdom to organism covering 4 phyla, 11 classes, 41 orders, 82 families, 269 genera, and 3,744 organisms were studied. Phylogenetic analysis revealed how the SecBs evolved without compromising their function with examples of 3-D structure comparison of two SecBs from Proteobacteria, and possible factors that affected the SecB evolution were considered. The average pairwise p-distances showed that the variance varied greatly in each taxonomic group. Finally, the variance was further partitioned into inter- and intra-clan variances, which could correspond to vertical and horizontal gene transfers, with relevance for Achromobacter, Brevundimonas, Ochrobactrum, and Pseudoxanthomonas.

Multitasking SecB chaperones in bacteria

Protein export in bacteria is facilitated by the canonical SecB chaperone, which binds to unfolded precursor proteins, maintains them in a translocation competent state and specifically cooperates with the translocase motor SecA to ensure their proper targeting to the Sec translocon at the cytoplasmic membrane. Besides its key contribution to the Sec pathway, SecB chaperone tasking is critical for the secretion of the Sec-independent heme-binding protein HasA and actively contributes to the cellular network of chaperones that control general proteostasis in Escherichia coli, as judged by the significant interplay found between SecB and the trigger factor, DnaK and GroEL chaperones. Although SecB is mainly a proteobacterial chaperone associated with the presence of an outer membrane and outer membrane proteins, secB-like genes are also found in Gram-positive bacteria as well as in certain phages and plasmids, thus suggesting alternative functions. In addition, a SecB-like protein is also present in the major human pathogen Mycobacterium tuberculosis where it specifically controls a stress-responsive toxin–antitoxin system. This review focuses on such very diverse chaperone functions of SecB, both in E. coli and in other unrelated bacteria.

Functional type 1 secretion system involved in Legionella pneumophila virulence

Legionella pneumophila is a Gram-negative pathogen found mainly in water, either in a free-living form or within infected protozoans, where it replicates. This bacterium can also infect humans by inhalation of contaminated aerosols, causing a severe form of pneumonia called legionellosis or Legionnaires' disease. The involvement of type II and IV secretion systems in the virulence of L. pneumophila is now well documented. Despite bioinformatic studies showing that a type I secretion system (T1SS) could be present in this pathogen, the functionality of this system based on the LssB, LssD, and TolC proteins has never been established. Here, we report the demonstration of the functionality of the T1SS, as well as its role in the infectious cycle of L. pneumophila. Using deletion mutants and fusion proteins, we demonstrated that the repeats-in-toxin protein RtxA is secreted through an LssB-LssD-TolC-dependent mechanism. Moreover, fluorescence monitoring and confocal microscopy showed that this T1SS is required for entry into the host cell, although it seems dispensable to the intracellular cycle. Together, these results underline the active participation of L. pneumophila, via its T1SS, in its internalization into host cells.

Molecular insights into type I secretion systems

Type 1 secretion systems are one of the main machineries in Gram-negative bacteria involved in the secretion of a wide range of substrates from the cytoplasm across the inner and outer membrane in one step to the extracellular space. The range of substrates varies from small proteins up to large surface layer proteins of about 900 kDa. Most of the substrates have a non-cleavable C-terminal secretion signal and so-called GG repeats that are able to bind calcium ions. The translocator complex is composed of a trimeric outer membrane protein that provides a pore in the outer membrane. A multimeric membrane fusion protein spans the periplasm and forms a continuous channel connecting the outer membrane protein with a dimeric ATP-binding cassette transporter in the inner membrane. The ATP-binding cassette-transporter is thought to form a channel through the inner membrane and energizes the transport process. This review will provide a detailed view of the components of the translocator and will summarize structural as well as functional data.

Type I secretion systems - a story of appendices

Secretion is an essential task for prokaryotic organisms to interact with their surrounding environment. In particular, the production of extracellular proteins and peptides is important for many aspects of an organism's survival and adaptation to its ecological niche. In Gram-negative bacteria, six different protein secretion systems have been identified so far, named Type I to Type VI; differing greatly in their composition and mechanism of action (Economou et al., 2006). The two membranes present in Gram-negative bacteria are negotiated either by one-step transport mechanisms (Type I and Type III), where the unfolded substrate is translocated directly into the extracellular space, without any periplasmic intermediates, or by two-step mechanisms (Type II and Type V), where the substrate is first transported into the periplasm to allow folding before a second transport step across the outer membrane occurs. Here we focus on Type I secretion systems and summarise our current knowledge of these one-step transport machineries with emphasis on the N-terminal extensions found in many Type I-specific ABC transporters. ABC transporters containing an N-terminal C39 peptidase domain cut off a leader peptide present in the substrate prior to secretion. The function of the second type of appendix, the C39 peptidase-like domain (CLD), is not yet completely understood. Recent results have shown that it is nonetheless essential for secretion and interacts specifically with the substrate of the transporter. The third group present does not contain any appendix. In light of this difference we compare the function of the appendix and the differences that might exist among the three families of T1SS.

Unique biofilm signature, drug susceptibility and decreased virulence in Drosophila through the Pseudomonas aeruginosa two-component system PprAB

Bacterial biofilm is considered as a particular lifestyle helping cells to survive hostile environments triggered by a variety of signals sensed and integrated through adequate regulatory pathways. Pseudomonas aeruginosa, a Gram-negative bacterium causing severe infections in humans, forms biofilms and is a fantastic example for fine-tuning of the transition between planktonic and community lifestyles through two-component systems (TCS). Here we decipher the regulon of the P. aeruginosa response regulator PprB of the TCS PprAB. We identified genes under the control of this TCS and once this pathway is activated, analyzed and dissected at the molecular level the PprB-dependent phenotypes in various models. The TCS PprAB triggers a hyper-biofilm phenotype with a unique adhesive signature made of BapA adhesin, a Type 1 secretion system (T1SS) substrate, CupE CU fimbriae, Flp Type IVb pili and eDNA without EPS involvement. This unique signature is associated with drug hyper-susceptibility, decreased virulence in acutely infected flies and cytotoxicity toward various cell types linked to decreased Type III secretion (T3SS). Moreover, once the PprB pathway is activated, decreased virulence in orally infected flies associated with enhanced biofilm formation and dissemination defect from the intestinal lumen toward the hemolymph compartment is reported. PprB may thus represent a key bacterial adaptation checkpoint of multicellular and aggregative behavior triggering the production of a unique matrix associated with peculiar antibiotic susceptibility and attenuated virulence, a particular interesting breach for therapeutic intervention to consider in view of possible eradication of P. aeruginosa biofilm-associated infections.

The role of ATP-binding cassette transporters in bacterial pathogenicity

The ATP-binding cassette transporter superfamily is present in all three domains of life. This ubiquitous class of integral membrane proteins have diverse biological functions, but their fundamental role involves the unidirectional translocation of compounds across cellular membranes in an ATP coupled process. The importance of this class of proteins in eukaryotic systems is well established as typified by their association with genetic diseases and roles in the multi-drug resistance of cancer. In stark contrast, the ABC transporters of prokaryotes have not been exhaustively investigated due to the sheer number of different roles and organisms in which they function. In this review, we examine the breadth of functions associated with microbial ABC transporters in the context of their contribution to bacterial pathogenicity and virulence.

Identification of the minimal region in lipase ABC transporter recognition domain of Pseudomonas fluorescens for secretion and fluorescence of green fluorescent protein

Background

TliA is a thermostable lipase secreted by the type 1 secretion system (T1SS) of Pseudomonas fluorescens. The secretion is promoted by its secretion/chaperone domain located near the C-terminus, which is composed mainly of four Repeat-in-Toxin (RTX) repeats. In order to identify the minimal region of TliA responsible for its secretion, five different copies of the secretion/chaperone domain, each involving truncated N-terminal residues and a common C-terminus, were acquired and named as lipase ABC transporter recognition domains (LARDs). Each LARD was fused to epidermal growth factor (EGF) or green fluorescent protein (GFP), and the secretion of EGF-LARD or GFP-LARD fusion proteins was assessed in Escherichia coli with ABC transporter.

Results

Among the fusion proteins, GFP or EGF with 105-residue LARD3 was most efficiently secreted. In addition, GFP-LARD3 emitted wild type GFP fluorescence. Structurally, LARD3 had the 4 RTX repeats exposed at the N-terminus, while other LARDs had additional residues prior to them or missed some of the RTX repeats. LARD3 was both necessary and sufficient for efficient secretion and maintenance of GFP fluorescence in E. coli, which was also confirmed in P. fluorescens and P. fluorescens ▵tliA, a knock-out mutant of tliA.

Conclusion

LARD3 was a potent secretion signal in T1SS for its fusion flanking RTX motif, which enhanced secretion and preserved the fluorescence of GFP. LARD3-mediated secretion in E. coli or P. fluorescens will enable the development of enhanced protein manufacturing factory and recombinant microbe secreting protein of interest in situ.

The rate of folding dictates substrate secretion by the Escherichia coli hemolysin type 1 secretion system

Secretion of the Escherichia coli toxin hemolysin A (HlyA) is catalyzed by the membrane protein complex HlyB-HlyD-TolC and requires a secretion sequence located within the last 60 amino acids of HlyA. The Hly translocator complex exports a variety of passenger proteins when fused N-terminal to this secretion sequence. However, not all fusions are secreted efficiently. Here, we demonstrate that the maltose binding protein (MalE) lacking its natural export signal and fused to the HlyA secretion signal is poorly secreted by the Hly system. We anticipated that folding kinetics might be limiting secretion, and we therefore introduced the "folding" mutation Y283D. Indeed this mutant fusion protein was secreted at a much higher level. This level was further enhanced by the introduction of a second MalE folding mutation (V8G or A276G). Secretion did not require the molecular chaperone SecB. Folding analysis revealed that all mutations reduced the refolding rate of the substrate, whereas the unfolding rate was unaffected. Thus, the efficiency of secretion by the Hly system is dictated by the folding rate of the substrate. Moreover, we demonstrate that fusion proteins defective in export can be engineered for secretion while still retaining function.

Multiple signals direct the assembly and function of a type 1 secretion system

Type 1 secretion systems (T1SS) are present in a wide range of Gram-negative bacteria and are involved in the secretion of diverse substrates such as proteases, lipases, and hemophores. T1SS consist of three proteins: an inner membrane ABC (ATP binding cassette) protein, a periplasmic adaptor, and an outer membrane channel of the TolC family. Assembly of the tripartite complex is transient and induced upon binding of the substrate to the ABC protein. It is generally accepted that T1SS-secreted proteins have a C-terminal secretion signal required for secretion and that this signal interacts with the ABC protein. However, we have previously shown that for the Serratia marcescens hemophore HasA, interactions with the ABC protein and subsequent T1SS assembly require additional regions. In this work, we characterize these regions and demonstrate that they are numerous, distributed throughout the HasA polypeptide, and most likely linear. Together with the C-terminal signal, these elements maximize the secretion of HasA. The data also show that the C-terminal signal of HasA triggers HasD-driven ATP hydrolysis, leading to disassembly of the complex. These data support a model of type 1 secretion involving a multistep interaction between the substrate and the ABC protein that stabilizes the assembled secretion system until the C terminus is presented. This model also supports tight coupling between synthesis and secretion.

SecB--a chaperone dedicated to protein translocation

SecB is a molecular chaperone in Gram-negative bacteria dedicated to the post-translational translocation of proteins across the cytoplasmic membrane. The entire surface of this chaperone is used for both of its native functions in protein targeting and unfolding. Single molecule studies revealed how SecB affects the folding pathway of proteins and how it prevents the tertiary structure formation and aggregation to support protein translocation.

Structure, function, and evolution of bacterial ATP-binding cassette systems

SUMMARY

ATP-binding cassette (ABC) systems are universally distributed among living organisms and function in many different aspects of bacterial physiology. ABC transporters are best known for their role in the import of essential nutrients and the export of toxic molecules, but they can also mediate the transport of many other physiological substrates. In a classical transport reaction, two highly conserved ATP-binding domains or subunits couple the binding/hydrolysis of ATP to the translocation of particular substrates across the membrane, through interactions with membrane-spanning domains of the transporter. Variations on this basic theme involve soluble ABC ATP-binding proteins that couple ATP hydrolysis to nontransport processes, such as DNA repair and gene expression regulation. Insights into the structure, function, and mechanism of action of bacterial ABC proteins are reported, based on phylogenetic comparisons as well as classic biochemical and genetic approaches. The availability of an increasing number of high-resolution structures has provided a valuable framework for interpretation of recent studies, and realistic models have been proposed to explain how these fascinating molecular machines use complex dynamic processes to fulfill their numerous biological functions. These advances are also important for elucidating the mechanism of action of eukaryotic ABC proteins, because functional defects in many of them are responsible for severe human inherited diseases.

A Calcium-gated Lid and a Large β-Roll Sandwich Are Revealed by the Crystal Structure of Extracellular Lipase from Serratia marcescens

Lipase LipA from Serratia marcescens is a 613-amino acid enzyme belonging to family I.3 of lipolytic enzymes that has an important biotechnological application in the production of a chiral precursor for the coronary vasodilator diltiazem. Like other family I.3 lipases, LipA is secreted by Gram-negative bacteria via a type I secretion system and possesses 13 copies of a calcium binding tandem repeat motif, GGXGXDXUX (U, hydrophobic amino acids), in the C-terminal part of the polypeptide chain. The 1.8-A crystal structure of LipA reveals a close relation to eukaryotic lipases, whereas family I.1 and I.2 enzymes appear to be more distantly related. Interestingly, the structure shows for the N-terminal lipase domain a variation on the canonical alpha/beta hydrolase fold in an open conformation, where the putative lid helix is anchored by a Ca(2+) ion essential for activity. Another novel feature observed in this lipase structure is the presence of a helical hairpin additional to the putative lid helix that exposes a hydrophobic surface to the aqueous medium and might function as an additional lid. The tandem repeats form two separated parallel beta-roll domains that pack tightly against each other. Variations of the consensus sequence of the tandem repeats within the second beta-roll result in an asymmetric Ca(2+) binding on only one side of the roll. The analysis of the properties of the beta-roll domains suggests an intramolecular chaperone function.

Heme acquisition by hemophores

Bacterial hemophores are secreted to the extracellular medium, where they scavenge heme from various hemoproteins due to their higher affinity for this compound, and return it to their specific outer membrane receptor. HasR, the outer membrane receptor of the HasA hemophore, assumes multiple functions which require various energy levels. Binding of heme and, of heme-free or heme-loaded hemophores is energy-independent. Heme transfer from the holo-hemophore to the outer membrane receptor is also energy-independent. In contrast, heme transport and hemophore release require basal or high levels of TonB and proton motive force, respectively. In addition, HasR is a component of a signaling cascade, regulating expression of the has operon via specific sigma and anti-sigma factors encoded by genes clustered at the has operon. The signal is the heme landing on HasR in the presence of the hemophore in its apo form. The has system is the only system thus far characterized in which the anti-sigma factor is submitted to the same signaling cascade as the target operon. Specific autoregulation of the has system, combined with negative regulation by the Fur protein, permits bacterial adaptation to the available iron source. In the presence of a heme-loaded hemophore, inactive anti-sigma factor is accumulated and can be activated as soon as the heme source dries up. Hence, the has system, instead of being submitted to amplification like other systems regulated by sigma anti-sigma factors, functions by pulses triggered by heme availability.

Probing the in vivo dynamics of type I protein secretion complex association through sensitivity to detergents

The Serratia marcescens hemophore is secreted by a type I secretion system consisting of three proteins: a membrane ABC protein, an adaptor protein, and the TolC-like outer membrane protein. Assembly of these proteins is induced by substrate binding to the ABC protein. Here we show that a hemophore mutant lacking the last 14 C-terminal amino acids is not secreted but rather interacts with the ABC protein and promotes a stable multiprotein complex. Strains expressing the transporter and the mutant protein are sensitive to detergents (sodium dodecyl sulfate [SDS]). TolC is trapped in the transporter jammed by the truncated substrate and therefore is not present at sufficient concentrations to allow the efflux pumps to expel detergents. Using an SDS sensitivity assay, we showed that the hemophore interacts with the ABC protein via two nonoverlapping sites. We also demonstrated that the C-terminal peptide, which functions as an intramolecular signal sequence in the complete substrate, may also have intermolecular activity and triggers complex dissociation in vivo when it is provided as a distinct peptide. The SDS sensitivity test on plates enables workers to study type I secretion protein association and dissociation independent of the secretion process itself.

The crystal structure of the secreted dimeric form of the hemophore HasA reveals a domain swapping with an exchanged heme ligand

To satisfy their iron needs, several Gram-negative bacteria use a heme uptake system involving an extracellular heme-binding protein called hemophore. The function of the hemophore is to acquire free or hemoprotein-bound heme and to transfer it to HasR, its specific outer membrane receptor, by protein-protein interaction. The hemophore HasA secreted by Serratia marcescens, an opportunistic pathogen, was the first to be identified and is now very well characterized. HasA is a monomer that binds one b heme with strong affinity. The heme in HasA is highly exposed to solvent and coordinated by an unusual pair of ligands, a histidine and a tyrosine. Here, we report the identification, the characterization and the X-ray structure of a dimeric form of HasA from S. marcescens: DHasA. We show that both monomeric and dimeric forms are secreted in iron deficient conditions by S. marcescens. The crystal structure of DHasA reveals that it is a domain swapped dimer. The overall structure of each monomeric subunit of DHasA is very similar to that of HasA but formed by parts coming from the two different polypeptide chains, involving one of the heme ligands. Consequently DHasA binds two heme molecules by residues coming from both polypeptide chains. We show here that, while DHasA can bind two heme molecules, it is not able to deliver them to the receptor HasR. However, DHasA can efficiently transfer its heme to the monomeric form that, in turn, delivers it to HasR. We assume that DHasA can function as a heme reservoir in the hemophore system.

Hemoglobin and heme scavenging

Release of hemoglobin into plasma is a physiological phenomenon associated with intravascular hemolysis. In plasma, stable haptoglobin-hemoglobin complexes are formed and these are subsequently delivered to the reticulo-endothelial system by CD163 receptor-mediated endocytosis. Heme arising from the degradation of hemoglobin, myoglobin, and of enzymes with heme prosthetic groups could be delivered in plasma. Albumin, haptoglobin, hemopexin, and high and low density lipoproteins cooperate to trap the plasma heme, thereby ensuring its complete clearance. Then hemopexin releases the heme into hepatic parenchymal cells only after internalization of the hemopexin-heme complex by CD91 receptor-mediated endocytosis. Moreover, alpha1-microglobulin contributes to heme degradation by a still unknown mechanism, with the concomitant formation of heterogeneous yellow-brown kynurenine-derived chromophores which are very tightly bound to amino acid residues close to the rim of the lipocalin pocket. During hemoglobin synthesis, the erythroid alpha-chain hemoglobin-stabilizing protein specifically binds free alpha-hemoglobin subunits limiting the free protein toxicity. Although highly toxic because capable of catalyzing free radical formation, heme is also a major and readily available source of iron for pathogenic organisms. Gram-negative bacteria pick up the heme-bound iron through the secretion of a hemophore that takes up either free heme or heme bound to heme-proteins and transports it to a specific receptor, which, in turn, releases the heme and hence iron into the bacterium. Here, hemoglobin and heme trapping mechanisms are summarized.

Discriminative features of type I and type III secreted proteins from Gram-negative bacteria

The amino acid composition of sequences and structural attributes (α-helices, β-sheets) of C-and N-terminal fragments (50 amino acids) were compared to annotated (SWISS-PROT/ TrEMBL) type I (20 sequences) and type III (22 sequences) secreted proteins of Gram-negative bacteria.

The discriminant analysis together with the stepwise forward and backward selection of variables revealed the frequencies of the residues Arg, Glu, Gly, Ile, Met, Pro, Ser, Tyr, Val as a set of strong (1-P < 0.001) predictor variables to discriminate between the sequences of type I and type III secreted proteins with a cross-validated accuracy of 98.6–100 %. The internal and external validity of discriminant analysis was confirmed by multiple (15 repeats) test-retest procedures using a randomly split original set of proteins; this validation method demonstrated an accuracy of 100 % for 191 non-selected (retest) sequences.

The discriminant analysis was also applied using selected variables from the propensities for β-sheets and polarity of C-terminal fragments. This approach produced the next highest and comparable cross-validated classification accuracy for randomly selected and retest proteins (85.4–86.0 % and 82.4–84.5 %, respectively).

The proposed sets of predictor variables could be used to assess the compatibility between secretion substrates and secretion pathways of Gram-negative bacteria by means of discriminant analysis.

Bacterial iron sources: from siderophores to hemophores

Iron is an essential element for most organisms, including bacteria. The oxidized form is insoluble, and the reduced form is highly toxic for most macromolecules and, in biological systems, is generally sequestrated by iron- and heme-carrier proteins. Thus, despite its abundance on earth, there is practically no free iron available for bacteria whatever biotope they colonize. To fulfill their iron needs, bacteria have multiple iron acquisition systems, reflecting the diversity of their potential biotopes. The iron/heme acquisition systems in bacteria have one of two general mechanisms. The first involves direct contact between the bacterium and the exogenous iron/heme sources. The second mechanism relies on molecules (siderophores and hemophores) synthesized and released by bacteria into the extracellular medium; these molecules scavenge iron or heme from various sources. Recent genetic, biochemical, and crystallographic studies have allowed substantial progress in describing molecular mechanisms of siderophore and hemophore interactions with the outer membrane receptors, transport through the inner membrane, iron storage, and regulation of genes encoding biosynthesis and uptake proteins.

Secretion of proteins with dimerization capacity by the haemolysin type I transport system of Escherichia coli

The tolerance of the haemolysin transport system (Hly) for exporting dimeric protein substrates to the supernatants of Escherichia coli cultures was examined. A strong dimerization domain (i.e. an amphipathic alpha-helix capable of forming a leucine zipper in the yeast transcription factor GCN4) was inserted into an epitope-tagged version of the 23 kDa C-terminal secretion signal of haemolysin (EHlyA). The zipper-containing polypeptide (ZEHlyA) was effectively secreted by E. coli cells carrying the HlyBD transporter and accumulated in the culture media as a stable dimer as determined by gel filtration chromatography. In vivo protein cross-linking experiments and coexpression with a secretion-deficient derivative of ZEHlyA indicated that leucine zipper-dependent dimerization occurs following secretion. To test whether dimerization allows the correct folding of the secreted polypeptide, immunoglobulin V(HH)-domains obtained from camel antibodies were fused to EHlyA and ZEHlyA. Functional dimerization of the ZEHlyA hybrid was anticipated to increase the apparent binding affinity (i.e. avidity) of the V(HH) moiety, thus becoming an excellent reporter of correct protein folding and dimerization. Both V(HH)-EHlyA and V(HH)-ZEHlyA hybrids were quantitatively secreted and found in the extracellular medium as active monomers and dimers respectively. When compared with their monomeric counterparts, the dimeric V(HH)-ZEHlyA molecules showed superior binding properties to their cognate antigen, with a 10-fold increase in their avidity. These data reveal a non-anticipated permissiveness of the Hly type I transport machinery for the secretion of substrates with dimerization capacity.

Unconventional protein secretion: membrane translocation of FGF-2 does not require protein unfolding

Endoplasmic reticulum/Golgi-dependent protein secretion depends on signal peptides that mediate membrane translocation of nascent secretory proteins into the lumen of the endoplasmic reticulum. Classical secretory proteins are transported across the membrane of the endoplasmic reticulum in an unfolded conformation, which is similar to protein import into mitochondria. This process is mediated by Sec61, the protein-conducting channel of the endoplasmic reticulum. Employing both FACS-based in vivo transport assays and confocal microscopy, we now show that fibroblast growth factor 2 (FGF-2), a pro-angiogenic mediator exported from mammalian cells by an unconventional secretory pathway, does not need to be unfolded in order to be released into the extracellular space. These findings suggest that the molecular apparatus mediating export of FGF-2 is not only distinct from classical translocation machineries in terms of molecular identity but also operates in a mechanistically distinct manner that allows membrane translocation of FGF-2 in a folded conformation.

Engineering HlyA hypersecretion inEscherichia coli based on proteomic and microarray analyses

Escherichia coli is a common host for recombinant protein production for biotechnology applications. Secretion to the extracellular media has the potential to reduce protein aggregation and to simplify downstream purification. However, the complexity of the mechanisms of protein secretion has confounded prior attempts to engineer enhanced secretion phenotypes. Here, mutagenesis was used to perturb E. coli W3110 cells secreting HlyA via a Type I pathway. An activity assay identified a mutant secreting fourfold more active alpha-hemolysin than the parent strain. The mutant was characterized using both high-density microarrays for mRNA profiling and a proteomics strategy for protein expression. The relative mRNA and protein expression levels of tRNA-synthetases were decreased in the mutant compared to the parent. A mathematical model of prokaryotic translation was used to design a variant of the hlyA gene that encodes the same amino acid sequence but uses rare codons to slow the rate of translation by altering five bases. Analysis of the parent strain transformed with a plasmid containing this variant gene resulted in the recovery of, and further improvement upon, the selected hypersecretion phenotype. These results present one of the first successful metabolic engineering attempts based on molecular information provided by mRNA and protein expression profiling approaches and resulting in a phenotype useful to the biotechnology community.

Antifolding activity of the SecB chaperone is essential for secretion of HasA, a quickly folding ABC pathway substrate

We have previously shown that SecB, the ATP-independent chaperone of the Sec pathway, is required for the secretion of the HasA hemophore from Serratia marcescens via its type I secretion pathway, both in the reconstituted system in Escherichia coli and in the original host. The refolding of apo-HasA after denaturation with guanidine HCl was followed by stopped-flow measurements of fluorescence of its single tryptophan, both in the absence and presence of SecB. In the absence of SecB, HasA folds very quickly with one main phase (45 s(-1)) accounting for 92% of the signal. SecB considerably slows down HasA folding. At stoichiometric amounts of SecB and HasA, a single phase (0.014 s(-1)) of refolding is observed. Two double point mutants of HasA were made, abolishing two hydrogen bonds between N-terminal and C-terminal side chain residues. In both cases, the mutants essentially maintained the same secondary and tertiary structure as wild-type HasA and were fully functional. Refolding of both mutants was much slower than that of wild-type HasA and they were secreted essentially independently of SecB. We conclude that SecB has mainly an antifolding function in the HasA ABC secretion pathway.

Haemophore-mediated signal transduction across the bacterial cell envelope in Serratia marcescens: the inducer and the transported substrate are different molecules

Numerous bacteria are able to use free and haemoprotein-bound haem as iron sources because of the action of small secreted proteins called haemophores. Haemophores have very high affinity for haem, and can therefore extract haem from the haem-carrier proteins and deliver it to the cells by means of specific cell surface receptors. Haem is then taken up and the empty haemophores are recycled. Here, we report a study of the regulation of the Serratia marcescens has operon which is involved in haemophore-dependent haem acquisition. We characterized two genes encoding proteins homologous to specific ECF sigma and antisigma factors. We showed that they regulate the synthesis of the haemophore-specific outer membrane receptor, HasR, by a signal transduction mechanism similar to the siderophore surface-signalling systems. We also showed the essential role of HasR itself in this process. Using haem-loaded and haem-free haemophore, we identified the stimulus for the HasR-mediated signal transduction as being the binding of the haem-loaded haemophore to HasR. Thus, unlike siderophore-uptake systems, in which the signalling molecule is the transported substrate itself, in the haemophore-dependent haem uptake system the inducer and the transported substrate are different compounds.

Virulence factors of the human opportunistic pathogen Serratia marcescens identified by in vivo screening

The human opportunistic pathogen Serratia marcescens is a bacterium with a broad host range, and represents a growing problem for public health. Serratia marcescens kills Caenorhabditis elegans after colonizing the nematode's intestine. We used C.elegans to screen a bank of transposon-induced S.marcescens mutants and isolated 23 clones with an attenuated virulence. Nine of the selected bacterial clones also showed a reduced virulence in an insect model of infection. Of these, three exhibited a reduced cytotoxicity in vitro, and among them one was also markedly attenuated in its virulence in a murine lung infection model. For 21 of the 23 mutants, the transposon insertion site was identified. This revealed that among the genes necessary for full in vivo virulence are those that function in lipopolysaccharide (LPS) biosynthesis, iron uptake and hemolysin production. Using this system we also identified novel conserved virulence factors required for Pseudomonas aeruginosa pathogenicity. This study extends the utility of C.elegans as an in vivo model for the study of bacterial virulence and advances the molecular understanding of S.marcescens pathogenicity.

The SecB chaperone is bifunctional in Serratia marcescens: SecB is involved in the Sec pathway and required for HasA secretion by the ABC transporter

HasA is the secreted hemophore of the heme acquisition system (Has) of Serratia marcescens. It is secreted by a specific ABC transporter apparatus composed of three proteins: HasD, an inner membrane ABC protein; HasE, another inner membrane protein; and HasF, a TolC homolog. Except for HasF, the structural genes of the Has system are encoded by an iron-regulated operon. In previous studies, this secretion system has been reconstituted in Escherichia coli, where it requires the presence of the SecB chaperone, the Sec pathway-dedicated chaperone. We cloned and inactivated the secB gene from S. marcescens. We show that S. marcescens SecB is 93% identical to E. coli SecB and complements the secretion defects of a secB mutant of E. coli for both the Sec and ABC pathways of HasA secretion. In S. marcescens, SecB inactivation affects translocation by the Sec pathway and abolishes HasA secretion. This demonstrates that S. marcescens SecB is the genuine chaperone for HasA secretion in S. marcescens. These results also demonstrate that S. marcescens SecB is bifunctional, as it is involved in two separate secretion pathways. We investigated the effects of secB point mutations in the reconstituted HasA secretion pathway by comparing the translocation of a Sec substrate in various mutants. Two different patterns of SecB residue effects were observed, suggesting that SecB functions may differ for the Sec and ABC pathways.

The N terminus of the HasA protein and the SecB chaperone cooperate in the efficient targeting and secretion of HasA via the ATP-binding cassette transporter

Secretion of the HasA hemophore is mediated by a C-terminal secretion signal as part of an ATP-binding cassette (ABC) pathway in the Gram-negative bacterium Serratia marcescens. We reconstituted the HasA secretion pathway in Escherichia coli. In E. coli, this pathway required three specific secretion functions and SecB, the general chaperone of the Sec pathway that recognizes HasA. The secretion of the isolated C-terminal secretion signal was not SecB-dependent. We have previously shown that intracellular folded HasA can no longer be secreted, and we proposed a step in the secretion process before the recognition of the secretion signal. Here we show that the secretion of a fully functional HasA variant, lacking the first 10 N-terminal amino acids, was less efficient than that of HasA and was SecB-independent. The N terminus of HasA was required, along with SecB, for the efficient secretion of the whole protein. We have also previously shown that HasA inhibits the secretion of metalloproteases from Erwinia chrysanthemi by their specific ABC transporter. Here we show that this abortive interaction between HasA and the E. chrysanthemi metalloprotease ABC transporter required both SecB and the N terminus of HasA. N-terminal fragments of HasA displayed this abortive interaction in vivo and also interacted specifically in vitro with the ABC protein of the Prt system. SecB also interacted specifically in vitro with the ABC protein of the Prt system. Finally, the HasA variant, lacking the first 10 N-terminal amino acids did not display this abortive interaction with the Prt system. We suggest that the N-terminal domain of HasA specifically recognizes the ABC protein in a SecB-dependent fashion, facilitating functional interaction with the C-terminal secretion signal leading to efficient secretion.

The E. coli alpha-hemolysin secretion system and its use in vaccine development

Many Gram-negative bacteria use a type I secretion system to translocate proteins, including pore-forming toxins, proteases, lipases and S-layer proteins, across both the inner and outer membranes into the extracellular surroundings. The Escherichia coli alpha-hemolysin (HlyA) secretion system is the prototypical and best characterized type I secretion system. The structure and function of the components of the HlyA secretion apparatus, HlyB, HlyD and TolC, have been studied in great detail. The functional characteristics of this secretion system enable it to be used in a variety of different applications, including the presentation of heterologous antigens in live-attenuated bacterial vaccines. Such vaccines can be an effective delivery system for heterologous antigens, and the use of a type I secretion system allows the antigens to be actively exported from the cytoplasm of the bacterial carrier rather than only becoming accessible to the host immune system after bacterial disintegration.