A simple in vitro Tn7-based transposition system with low target site selectivity for genome and gene analysis

Molecular basis for transposase activation by a dedicated AAA+ ATPase

Transposases drive chromosomal rearrangements and the dissemination of drug-resistance genes and toxins1-3. Although some transposases act alone, many rely on dedicated AAA+ ATPase subunits that regulate site selectivity and catalytic function through poorly understood mechanisms. Using IS21 as a model transposase system, we show how an ATPase regulator uses nucleotide-controlled assembly and DNA deformation to enable structure-based site selectivity, transposase recruitment, and activation and integration. Solution and cryogenic electron microscopy studies show that the IstB ATPase self-assembles into an autoinhibited pentamer of dimers that tightly curves target DNA into a half-coil. Two of these decamers dimerize, which stabilizes the target nucleic acid into a kinked S-shaped configuration that engages the IstA transposase at the interface between the two IstB oligomers to form an approximately 1 MDa transpososome complex. Specific interactions stimulate regulator ATPase activity and trigger a large conformational change on the transposase that positions the catalytic site to perform DNA strand transfer. These studies help explain how AAA+ ATPase regulators-which are used by classical transposition systems such as Tn7, Mu and CRISPR-associated elements-can remodel their substrate DNA and cognate transposases to promote function.

Mechanism of target site selection by type V-K CRISPR-associated transposases

CRISPR-associated transposases (CASTs) repurpose nuclease-deficient CRISPR effectors to catalyze RNA-guided transposition of large genetic payloads. Type V-K CASTs offer potential technology advantages but lack accuracy, and the molecular basis for this drawback has remained elusive. Here, we reveal that type V-K CASTs maintain an RNA-independent, "untargeted" transposition pathway alongside RNA-dependent integration, driven by the local availability of TnsC filaments. Using cryo-electron microscopy, single-molecule experiments, and high-throughput sequencing, we found that a minimal, CRISPR-less transpososome preferentially directs untargeted integration at AT-rich sites, with additional local specificity imparted by TnsB. By exploiting this knowledge, we suppressed untargeted transposition and increased type V-K CAST specificity up to 98.1% in cells without compromising on-target integration efficiency. These findings will inform further engineering of CAST systems for accurate, kilobase-scale genome engineering applications.

Mechanism of target site selection by type V-K CRISPR-associated transposases

Unlike canonical CRISPR-Cas systems that rely on RNA-guided nucleases for target cleavage, CRISPR-associated transposases (CASTs) repurpose nuclease-deficient CRISPR effectors to facilitate RNA-guided transposition of large genetic payloads. Type V-K CASTs offer several potential upsides for genome engineering, due to their compact size, easy programmability, and unidirectional integration. However, these systems are substantially less accurate than type I-F CASTs, and the molecular basis for this difference has remained elusive. Here we reveal that type V-K CASTs undergo two distinct mobilization pathways with remarkably different specificities: RNA-dependent and RNA-independent transposition. Whereas RNA-dependent transposition relies on Cas12k for accurate target selection, RNA-independent integration events are untargeted and primarily driven by the local availability of TnsC filaments. The cryo-EM structure of the untargeted complex reveals a TnsB-TnsC-TniQ transpososome that encompasses two turns of a TnsC filament and otherwise resembles major architectural aspects of the Cas12k-containing transpososome. Using single-molecule experiments and genome-wide meta-analyses, we found that AT-rich sites are preferred substrates for untargeted transposition and that the TnsB transposase also imparts local specificity, which collectively determine the precise insertion site. Knowledge of these motifs allowed us to direct untargeted transposition events to specific hotspot regions of a plasmid. Finally, by exploiting TnsB's preference for on-target integration and modulating the availability of TnsC, we suppressed RNA-independent transposition events and increased type V-K CAST specificity up to 98.1%, without compromising the efficiency of on-target integration. Collectively, our results reveal the importance of dissecting target site selection mechanisms and highlight new opportunities to leverage CAST systems for accurate, kilobase-scale genome engineering applications.

RNA-guided DNA insertion with CRISPR-associated transposases

CRISPR-Cas nucleases are powerful tools for manipulating nucleic acids; however, targeted insertion of DNA remains a challenge, as it requires host cell repair machinery. Here we characterize a CRISPR-associated transposase from cyanobacteria Scytonema hofmanni (ShCAST) that consists of Tn7-like transposase subunits and the type V-K CRISPR effector (Cas12k). ShCAST catalyzes RNA-guided DNA transposition by unidirectionally inserting segments of DNA 60 to 66 base pairs downstream of the protospacer. ShCAST integrates DNA into targeted sites in the Escherichia coli genome with frequencies of up to 80% without positive selection. This work expands our understanding of the functional diversity of CRISPR-Cas systems and establishes a paradigm for precision DNA insertion.

Approaches to Understanding the Mediator Function of Brh2 in Ustilago maydis

Primary components of the homologous recombination pathway in eukaryotes include Rad51 whose function is to search for DNA sequence homology and promote strand exchange, its mediator BRCA2, and Dss1, a key regulator of BRCA2. We seek to understand the role of BRCA2 in governing the activity of Rad51 and to learn how BRCA2 function is regulated by Dss1. We use the microbe Ustilago maydis as a model system for experimentation because it has a well-conserved BRCA2-homolog, Brh2, and is amenable to biochemical and molecular genetic manipulations and analysis. The powerful attributes of this system open the way for gaining insight into BRCA2's molecular mechanism through avenues not immediately approachable in the vertebrate systems. Here we provide protocols for preparing Brh2, Dss1, and Rad51 as reagents for use in biochemical assays to monitor function and present methods for transposon-based mutational analysis of Brh2 for use in genetic dissection of function.

Recruitment of CRISPR-Cas systems by Tn7-like transposons

A survey of bacterial and archaeal genomes shows that many Tn7-like transposons contain minimal type I-F CRISPR-Cas systems that consist of fused cas8f and cas5f, cas7f, and cas6f genes and a short CRISPR array. Several small groups of Tn7-like transposons encompass similarly truncated type I-B CRISPR-Cas. This minimal gene complement of the transposon-associated CRISPR-Cas systems implies that they are competent for pre-CRISPR RNA (precrRNA) processing yielding mature crRNAs and target binding but not target cleavage that is required for interference. Phylogenetic analysis demonstrates that evolution of the CRISPR-Cas-containing transposons included a single, ancestral capture of a type I-F locus and two independent instances of type I-B loci capture. We show that the transposon-associated CRISPR arrays contain spacers homologous to plasmid and temperate phage sequences and, in some cases, chromosomal sequences adjacent to the transposon. We hypothesize that the transposon-encoded CRISPR-Cas systems generate displacement (R-loops) in the cognate DNA sites, targeting the transposon to these sites and thus facilitating their spread via plasmids and phages. These findings suggest the existence of RNA-guided transposition and fit the guns-for-hire concept whereby mobile genetic elements capture host defense systems and repurpose them for different stages in the life cycle of the element.

DNA Transposition at Work

DNA transposons are defined segments of DNA that are able to move from one genomic location to another. Movement is facilitated by one or more proteins, called the transposase, typically encoded by the mobile element itself. Here, we first provide an overview of the classification of such mobile elements in a variety of organisms. From a mechanistic perspective, we have focused on one particular group of DNA transposons that encode a transposase with a DD(E/D) catalytic domain that is topologically similar to RNase H. For these, a number of three-dimensional structures of transpososomes (transposase-nucleic acid complexes) are available, and we use these to describe the basics of their mechanisms. The DD(E/D) group, in addition to being the largest and most common among all DNA transposases, is the one whose members have been used for a wide variety of genomic applications. Therefore, a second focus of the article is to provide a nonexhaustive overview of transposon applications. Although several non-transposon-based approaches to site-directed genome modifications have emerged in the past decade, transposon-based applications are highly relevant when integration specificity is not sought. In fact, for many applications, the almost-perfect randomness and high frequency of integration make transposon-based approaches indispensable.

Multipurpose Transposon-Insertion Libraries in Yeast

Libraries of transposon-insertion alleles constitute powerful and versatile tools for large-scale analysis of yeast gene function. Transposon-insertion libraries are constructed most simply through mutagenesis of a plasmid-based genomic DNA library; modification of the mutagenizing transposon by incorporation of yeast selectable markers, recombination sites, and an epitope tag enables the application of insertion alleles for phenotypic screening and protein localization. In particular, yeast genomic DNA libraries have been mutagenized with modified bacterial transposons carrying the URA3 marker, lox recombination sites, and sequence encoding multiple copies of the hemagglutinin (HA) epitope. Mutagenesis with these transposons has yielded a large resource of insertion alleles affecting nearly 4000 yeast genes in total. Through well-established protocols, these insertion libraries can be introduced into the desired strain backgrounds and the resulting insertional mutants can be screened or systematically analyzed. Relative to alternative methods of UV irradiation or chemical mutagenesis, transposon-insertion alleles can be easily identified by PCR-based approaches or high-throughput sequencing. Transposon-insertion libraries also provide a cost-effective alternative to targeted deletion approaches, although, in contrast to start-codon to stop-codon deletions, insertion alleles might not represent true null-mutants. For protein-localization studies, transposon-insertion alleles can provide encoded epitope tags in-frame with internal codons; in many cases, these transposon-encoded epitope tags can provide a more accurate localization for proteins in which terminal sequences are crucial for intracellular targeting. Thus, overall, transposon-insertion libraries can be used quickly and economically and have a particular utility in screening for desired phenotypes and localization patterns in nonstandard genetic backgrounds.

Avoiding the ends: internal epitope tagging of proteins using transposon Tn7

Peptide tags fused to proteins are used in a variety of applications, including as affinity tags for purification, epitope tags for immunodetection, or fluorescent protein tags for visualization. However, the peptide tags can disrupt the target protein function. When function is disrupted by fusing a peptide to either the N or C terminus of the protein of interest, identifying alternative ways to create functional tagged fusion proteins can be difficult. Here, we describe a method to introduce protein tags internal to the coding sequence of a target protein. The method employs in vitro Tn7-transposon mutagenesis of plasmids for random introduction of the tag, followed by subsequent Gateway cloning steps to isolate alleles with mutations in the coding sequence of the target gene. The Tn7-epitope cassette is designed such that essentially all of the transposon is removed through restriction enzyme digestion, leaving only the protein tag at diverse sites internal to the ORF. We describe the use of this system to generate a panel of internally epitope-tagged versions of the Saccharomyces cerevisiae GPI-linked membrane protein Dcw1 and the Candida glabrata transcriptional regulator Sir3. This internal protein tagging system is, in principle, adaptable to tag proteins in any organism for which Gateway-adapted expression vectors exist.

Genome-wide synthetic genetic screening by transposon mutagenesis in Candida albicans

Transposon-based mutagenesis is an effective method for genetic screening on a genome-wide scale, with particular applicability in organisms possessing compact genomes where transforming DNA tends to integrate by homologous recombination. Methods for transposon mutagenesis have been applied with great success in the budding yeast Saccharomyces cerevisiae and in the related pathogenic yeast Candida albicans. In C. albicans, we have implemented transposon mutagenesis to generate heterozygous mutations for the analysis of complex haploinsufficiency, a type of synthetic genetic interaction wherein a pair of non-complementing heterozygous mutations results in a stronger phenotype then either individual mutation in isolation. Genes exhibiting complex haploinsufficiency typically function within a regulatory pathway, in parallel pathways, or in parallel branches within a single pathway. Here, we present protocols to implement transposon mutagenesis for complex haploinsufficiency screening in C. albicans, indicating methods for transposon construction, mutagenesis, phenotypic screening, and identification of insertion sites in strains of interest. In total, the approach is a useful means to implement large-scale synthetic genetic screening in the diploid C. albicans.

Mass spectrometry-based proteomic approaches for discovery of HIV-host interactions

A molecular understanding of viral infection requires a multi-disciplinary approach. Mass spectrometry has emerged as an indispensable tool to investigate the complex and dynamic interactions between HIV-1 and its host. It has been employed to study protein associations, changes in protein abundance and post-translational modifications occurring after viral infection. Here, we review and provide examples of mass spectrometry-based proteomic approaches currently used to explore virus-host interaction. Efforts in this area are certain to accelerate the discovery of the unique molecular strategies utilized by the virus to commandeer the cell as well as mechanisms of host defense.

Promoter activation by CII, a potent transcriptional activator from bacteriophage 186

The lysogeny promoting protein CII from bacteriophage 186 is a potent transcriptional activator, capable of mediating at least a 400-fold increase in transcription over basal activity. Despite being functionally similar to its counterpart in phage λ, it shows no homology at the level of protein sequence and does not belong to any known family of transcriptional activators. It also has the unusual property of binding DNA half-sites that are separated by 20 base pairs, center to center. Here we investigate the structural and functional properties of CII using a combination of genetics, in vitro assays, and mutational analysis. We find that 186 CII possesses two functional domains, with an independent activation epitope in each. 186 CII owes its potent activity to activation mechanisms that are dependent on both the σ(70) and α C-terminal domain (αCTD) components of RNA polymerase, contacting different functional domains. We also present evidence that like λ CII, 186 CII is proteolytically degraded in vivo, but unlike λ CII, 186 CII proteolysis results in a specific, transcriptionally inactive, degradation product with altered self-association properties.

Tn7

The bacterial transposon Tn7 is distinguished by the levels of control it displays over transposition and its capacity to utilize different kinds of target sites. Transposition is carried out using five transposon-encoded proteins, TnsA, TnsB, TnsC, TnsD, and TnsE, which facilitate transfer of the element while minimizing the chances of inactivating host genes by using two pathways of transposition. One of these pathways utilizes TnsD, which targets transposition into a single site found in bacteria ( attTn7 ), and a second utilizes TnsE, which preferentially directs transposition into plasmids capable of moving between bacteria. Control of transposition involves a heteromeric transposase that consists of two proteins, TnsA and TnsB, and a regulator protein TnsC. Tn7 also has the ability to inhibit transposition into a region already occupied by the element in a process called target immunity. Considerable information is available about the functional interactions of the Tn7 proteins and many of the protein–DNA complexes involved in transposition. Tn7-like elements that encode homologs of all five of the proteins found in Tn7 are common in diverse bacteria, but a newly appreciated larger family of elements appears to use the same core TnsA, TnsB, and TnsC proteins with other putative target site selector proteins allowing different targeting pathways.

Role of capsule and O antigen in the virulence of uropathogenic Escherichia coli

Urinary tract infection (UTI) is one of the most common bacterial infections in humans, with uropathogenic Escherichia coli (UPEC) the leading causative organism. UPEC has a number of virulence factors that enable it to overcome host defenses within the urinary tract and establish infection. The O antigen and the capsular polysaccharide are two such factors that provide a survival advantage to UPEC. Here we describe the application of the rpsL counter selection system to construct capsule (kpsD) and O antigen (waaL) mutants and complemented derivatives of three reference UPEC strains: CFT073 (O6:K2:H1), RS218 (O18:K1:H7) and 1177 (O1:K1:H7). We observed that while the O1, O6 and O18 antigens were required for survival in human serum, the role of the capsule was less clear and linked to O antigen type. In contrast, both the K1 and K2 capsular antigens provided a survival advantage to UPEC in whole blood. In the mouse urinary tract, mutation of the O6 antigen significantly attenuated CFT073 bladder colonization. Overall, this study contrasts the role of capsule and O antigen in three common UPEC serotypes using defined mutant and complemented strains. The combined mutagenesis-complementation strategy can be applied to study other virulence factors with complex functions both in vitro and in vivo.

Inter- and intra-specific pan-genomes of Borrelia burgdorferi sensu lato: genome stability and adaptive radiation

BACKGROUND

Lyme disease is caused by spirochete bacteria from the Borrelia burgdorferi sensu lato (B. burgdorferi s.l.) species complex. To reconstruct the evolution of B. burgdorferi s.l. and identify the genomic basis of its human virulence, we compared the genomes of 23 B. burgdorferi s.l. isolates from Europe and the United States, including B. burgdorferi sensu stricto (B. burgdorferi s.s., 14 isolates), B. afzelii (2), B. garinii (2), B. "bavariensis" (1), B. spielmanii (1), B. valaisiana (1), B. bissettii (1), and B. "finlandensis" (1).

RESULTS

Robust B. burgdorferi s.s. and B. burgdorferi s.l. phylogenies were obtained using genome-wide single-nucleotide polymorphisms, despite recombination. Phylogeny-based pan-genome analysis showed that the rate of gene acquisition was higher between species than within species, suggesting adaptive speciation. Strong positive natural selection drives the sequence evolution of lipoproteins, including chromosomally-encoded genes 0102 and 0404, cp26-encoded ospC and b08, and lp54-encoded dbpA, a07, a22, a33, a53, a65. Computer simulations predicted rapid adaptive radiation of genomic groups as population size increases.

CONCLUSIONS

Intra- and inter-specific pan-genome sizes of B. burgdorferi s.l. expand linearly with phylogenetic diversity. Yet gene-acquisition rates in B. burgdorferi s.l. are among the lowest in bacterial pathogens, resulting in high genome stability and few lineage-specific genes. Genome adaptation of B. burgdorferi s.l. is driven predominantly by copy-number and sequence variations of lipoprotein genes. New genomic groups are likely to emerge if the current trend of B. burgdorferi s.l. population expansion continues.

Insertion site preference of Mu, Tn5, and Tn7 transposons

Background

Transposons, segments of DNA that can mobilize to other locations in a genome, are often used for insertion mutagenesis or to generate priming sites for sequencing of large DNA molecules. For both of these uses, a transposon with minimal insertion bias is desired to allow complete coverage with minimal oversampling.

Findings

Three transposons, Mu, Tn5, and Tn7, were used to generate insertions in the same set of fosmids containing Candida glabrata genomic DNA. Tn7 demonstrates markedly less insertion bias than either Mu or Tn5, with both Mu and Tn5 biased toward sequences containing guanosine (G) and cytidine (C). This preference of Mu and Tn5 yields less uniform spacing of insertions than for Tn7, in the adenosine (A) and thymidine (T) rich genome of C. glabrata (39% GC).

Conclusions

In light of its more uniform distribution of insertions, Tn7 should be considered for applications in which insertion bias is deleterious.

What limits the efficiency of double-strand break-dependent stress-induced mutation in Escherichia coli?

Stress-induced mutation is a collection of molecular mechanisms in bacterial, yeast and human cells that promote mutagenesis specifically when cells are maladapted to their environment, i.e. when they are stressed. Here, we review one molecular mechanism: double-strand break (DSB)-dependent stress-induced mutagenesis described in starving Escherichia coli. In it, the otherwise high-fidelity process of DSB repair by homologous recombination is switched to an error-prone mode under the control of the RpoS general stress response, which licenses the use of error-prone DNA polymerase, DinB, in DSB repair. This mechanism requires DSB repair proteins, RpoS, the SOS response and DinB. This pathway underlies half of spontaneous chromosomal frameshift and base substitution mutations in starving E. coli [Proc Natl Acad Sci USA 2011;108:13659-13664], yet appeared less efficient in chromosomal than F' plasmid-borne genes. Here, we demonstrate and quantify DSB-dependent stress-induced reversion of a chromosomal lac allele with DSBs supplied by I-SceI double-strand endonuclease. I-SceI-induced reversion of this allele was previously studied in an F'. We compare the efficiencies of mutagenesis in the two locations. When we account for contributions of an F'-borne extra dinB gene, strain background differences, and bypass considerations of rates of spontaneous DNA breakage by providing I-SceI cuts, the chromosome is still ∼100 times less active than F. We suggest that availability of a homologous partner molecule for recombinational break repair may be limiting. That partner could be a duplicated chromosomal segment or sister chromosome.

A large-scale complex haploinsufficiency-based genetic interaction screen in Candida albicans: analysis of the RAM network during morphogenesis

The morphogenetic transition between yeast and filamentous forms of the human fungal pathogen Candida albicans is regulated by a variety of signaling pathways. How these pathways interact to orchestrate morphogenesis, however, has not been as well characterized. To address this question and to identify genes that interact with the Regulation of Ace2 and Morphogenesis (RAM) pathway during filamentation, we report the first large-scale genetic interaction screen in C. albicans. Our strategy for this screen was based on the concept of complex haploinsufficiency (CHI). A heterozygous mutant of CBK1 (cbk1Δ/CBK1), a key RAM pathway protein kinase, was subjected to transposon-mediated, insertional mutagenesis. The resulting double heterozygous mutants (6,528 independent strains) were screened for decreased filamentation on Spider Medium (SM). From the 441 mutants showing altered filamentation, 139 transposon insertion sites were sequenced, yielding 41 unique CBK1-interacting genes. This gene set was enriched in transcriptional targets of Ace2 and, strikingly, the cAMP-dependent protein kinase A (PKA) pathway, suggesting an interaction between these two pathways. Further analysis indicates that the RAM and PKA pathways co-regulate a common set of genes during morphogenesis and that hyper-activation of the PKA pathway may compensate for loss of RAM pathway function. Our data also indicate that the PKA–regulated transcription factor Efg1 primarily localizes to yeast phase cells while the RAM–pathway regulated transcription factor Ace2 localizes to daughter nuclei of filamentous cells, suggesting that Efg1 and Ace2 regulate a common set of genes at separate stages of morphogenesis. Taken together, our observations indicate that CHI–based screening is a useful approach to genetic interaction analysis in C. albicans and support a model in which these two pathways regulate a common set of genes at different stages of filamentation.

Candida albicans is the most common cause of fungal infections in humans. As a diploid yeast without a classical sexual cycle, many genetic approaches developed for large-scale genetic interaction studies in the model yeast Saccharomyces cerevisiae cannot be applied to C. albicans. Genetic interaction studies have proven to be powerful genetic tools for the analysis of complex biological processes. Here, we demonstrate that libraries of C. albicans strains containing heterozygous mutations in two different genes can be generated and used to study genetic interactions in C. albicans on a large scale. Double heterozygous mutants that show more severe phenotypes than strains with single heterozygous mutations are indicative of genetic interactions through a phenomenon referred to as complex haploinsufficiency (CHI). We applied this approach to the study of the RAM (Regulation of Ace2 and Morphogenesis) signaling network during the morphogenetic transition of C. albicans from yeast to filamentous growth. Among the genes that interacted with CBK1, the key signaling kinase of the RAM pathway, were transcriptional targets of the RAM pathway and the protein kinase A pathway. Further analysis supports a model in which these two pathways co-regulate a common set of genes at different stages of filamentation.

Analysis of subtelomeric silencing in Candida glabrata

Analysis of gene function often involves detailed studies of when a given gene is expressed or silenced. Transposon mutagenesis is a powerful tool to generate insertional mutations that provide with a selectable marker and a reporter gene that can be used to analyze the transcriptional activity of a specific locus in a variety of microorganisms to study gene regulation. Then the reporter gene expression can be easily measured under different conditions to gain insight into the regulation of the particular locus of interest. We have used transposon mutagenesis as a tool to generate insertional mutations with a modified Tn7 transposon containing the reporter gene URA3 (Tn7-URA3) to study subtelomeric silencing in the opportunistic fungal pathogen Candida glabrata. This method consists of two major steps: an in vitro Tn7-URA3 mutagenesis of a plasmid containing the desired subtelomeric region to be analyzed, followed by homologous recombination into the target region of the C. glabrata genome. As an alternative, a fusion PCR protocol can also be used in which the URA3 reporter gene can be "fused" together with the 5' and 3' regions of the desired insertion point by a two step PCR protocol. This fusion product can be introduced into the C. glabrata genome by homologous recombination after transformation in the same way as the Tn7-URA3 mutagenesis products. Once the URA3 reporter gene has been introduced in the desired locus in the C. glabrata genome, a simple plate growth assay is performed to assess the expression of the reporter gene.

M94 is essential for the secondary envelopment of murine cytomegalovirus

The gene M94 of murine cytomegalovirus (MCMV) as well as its homologues UL16 in alphaherpesviruses is involved in viral morphogenesis. For a better understanding of its role in the viral life cycle, a library of random M94 mutants was generated by modified transposon-based linker scanning mutagenesis. A comprehensive set of M94 mutants was reinserted into the MCMV genome and tested for their capacity to complement the M94 null mutant. Thereby, 34 loss-of-function mutants of M94 were identified, which were tested in a second screen for their capacity to inhibit virus replication. This analysis identified two N-terminal insertion mutants of M94 with a dominant negative effect. We compared phenotypes induced by the conditional expression of these dominant negative M94 alleles with the null phenotype of the M94 deletion. The viral gene expression cascade and the nuclear morphogenesis steps were not affected in either setting. In both cases, however, secondary envelopment did not proceed in the absence of functional M94, and capsids subsequently accumulated in the center of the cytoplasmic assembly complex. In addition, deletion of M94 resulted in a block of cell-to-cell spread. Moreover, the dominant negative mutant of M94 demonstrated a defect in interacting with M99, the UL11 homologue of MCMV.

Introducing predetermined mutations throughout a target gene using TDEM (transposon-directed base-exchange mutagenesis)

Transposon-directed base-exchange mutagenesis (TDEM) is an efficient and controllable method for introducing a mutation(s) into a gene. Each round of TDEM removes a predetermined number of bases (up to 11 base pairs) from a randomly selected site within the target gene and replaces them with any length of DNA of predetermined sequence. Therefore, the number of bases to be deleted and inserted can be precisely regulated. Because each round of TDEM generates mutation(s) at a single site, the number of mutations introduced can be determined by the number of cycles of TDEM. Furthermore, using a novel frame-checking procedure, non-functional mutants containing a frameshift or stop codon can be minimized. Thus, TDEM can be used to introduce a limited and predetermined change at each round of mutagenesis, thereby providing a useful tool for studying protein structure and function.

Genome-wide transposon mutagenesis in Saccharomyces cerevisiae and Candida albicans

Transposon mutagenesis is an effective method for generating large sets of random mutations in target DNA, with applicability toward numerous types of genetic screens in prokaryotes, single-celled eukaryotes, and metazoans alike. Relative to methods of random mutagenesis by chemical/UV treatment, transposon insertions can be easily identified in mutants with phenotypes of interest. The construction of transposon insertion mutants is also less labor-intensive on a genome-wide scale than methods for targeted gene replacement, although transposon insertions are not precisely targeted to a specific residue, and thus coverage of the target DNA can be problematic. The collective advantages of transposon mutagenesis have been well demonstrated in studies of the budding yeast Saccharomyces cerevisiae and the related pathogenic yeast Candida albicans, as transposon mutagenesis has been used extensively for phenotypic screens in both yeasts. Consequently, we present here protocols for the generation and utilization of transposon-insertion DNA libraries in S. cerevisiae and C. albicans. Specifically, we present methods for the large-scale introduction of transposon insertion alleles in a desired strain of S. cerevisiae. Methods are also presented for transposon mutagenesis of C. albicans, encompassing both the construction of the plasmid-based transposon-mutagenized DNA library and its introduction into a desired strain of Candida. In total, these methods provide the necessary information to implement transposon mutagenesis in yeast, enabling the construction of large sets of identifiable gene disruption mutations, with particular utility for phenotypic screening in nonstandard genetic backgrounds.

Identification of tolerated insertion sites in poliovirus non-structural proteins

Insertion of nucleotide sequences encoding "tags" that can be expressed in specific viral proteins during an infection is a useful strategy for purifying viral proteins and their functional complexes from infected cells and/or for visualizing the dynamics of their subcellular location over time. To identify regions in the poliovirus polyprotein that could potentially accommodate insertion of tags, transposon-mediated insertion mutagenesis was applied to the entire nonstructural protein-coding region of the poliovirus genome, followed by selection of genomes capable of generating infectious, viable viruses. This procedure allowed us to identify at least one site in each viral nonstructural protein, except protein 2C, in which a minimum of five amino acids could be inserted. The distribution of these sites is analyzed from the perspective of their protein structural context and from the perspective of virus evolution.

Transposon Tn7 preferentially inserts into GAA*TTC triplet repeats under conditions conducive to Y*R*Y triplex formation

Background

Expansion of an unstable GAA•TTC repeat in the first intron of the FXN gene causes Friedreich ataxia by reducing frataxin expression. Structure formation by the repeat has been implicated in both frataxin repression and GAA•TTC instability. The GAA•TTC sequence is capable of adopting multiple non-B DNA structures including Y•R•Y and R•R•Y triplexes. Lower pH promotes the formation of Y•R•Y triplexes by GAA•TTC. Here we used the bacterial transposon Tn7 as an in vitro tool to probe whether GAA•TTC repeats can attract a well-characterized recombinase.

Methodology/Principal Findings

Tn7 showed a pH-dependent preference for insertion into uninterrupted regions of a Friedreich ataxia patient-derived repeat, inserting 48, 39 and 14 percent of the time at pH 7, pH 8 and pH 9, respectively. Moreover, Tn7 also showed orientation and region specific insertion within the repeat at pH 7 and pH 8, but not at pH 9. In contrast, transposon Tn5 showed no strong preference for or against the repeat during in vitro transposition at any pH tested. Y•R•Y triplex formation was reduced in predictable ways by transposon interruption of the GAA•TTC repeat. However, transposon interruptions in the GAA•TTC repeats did not increase the in vitro transcription efficiency of the templates.

Conclusions/Significance

We have demonstrated that transposon Tn7 will recognize structures that form spontaneously in GAA•TTC repeats and insert in a specific orientation within the repeat. The conditions used for in vitro transposition span the physiologically relevant range suggesting that long GAA•TTC repeats can form triplex structures in vivo, attracting enzymes involved in DNA repair, recombination and chromatin modification.

Characterization of the CI repressor protein encoded by the temperate lactococcal phage TP901-1

The gene regulatory mechanism determining the developmental pathway of the temperate bacteriophage TP901-1 is regulated by two phage-encoded proteins, CI and MOR. Functional domains of the CI repressor were investigated by introducing linkers of 15 bp at various positions in cI and by limited proteolysis of purified CI protein. We show that insertions of five amino acids at positions in the N-terminal half of CI resulted in mutant proteins that could no longer repress transcription from the lytic promoter, P(L). We confirmed that the N-terminal domain of CI contains the DNA binding site, and we showed that this part of the protein is tightly folded, whereas the central part and the C-terminal part of CI seem to contain more flexible structures. Furthermore, insertions at several different positions in the central part of the CI protein reduced the cooperative binding of CI to the operator sites and possibly altered the interaction with MOR.

Transposition into replicating DNA occurs through interaction with the processivity factor

The bacterial transposon Tn7 directs transposition into actively replicating DNA by a mechanism involving the transposon-encoded protein TnsE. Here we show that TnsE physically and functionally interacts with the processivity factor of the DNA replication machinery in vivo and in vitro. Our work establishes an in vitro TnsABC+E transposition reaction reconstituted from purified proteins and target DNA structures. Using the in vitro reaction we confirm that the processivity factor specifically reorders TnsE-mediated transposition events on target DNAs in a way that matches the bias with active DNA replication in vivo. The TnsE interaction with an essential and conserved component of the replication machinery, and a DNA structure reveals a mechanism by which Tn7, and probably other elements, selects target sites associated with DNA replication.

Transposon-directed base-exchange mutagenesis (TDEM): a novel method for multiple-nucleotide substitutions within a target gene

In this report we describe transposon-directed base-exchange mutagenesis (TDEM), an efficient and controllable method for introducing a mutation into a gene. Each round of TDEM can remove up to 11 base pairs from a randomly selected site within the target gene and replace them with any length of DNA of predetermined sequence. Therefore, the number of bases to be deleted and inserted can be independently regulated providing greater versatility than existing methods of transposon-based mutagenesis. Subsequently, multiple rounds of mutagenesis will provide a diverse mutant library that contains multiple mutations throughout the gene. Additionally, we developed a simple frame-checking procedure that eliminates nonfunctional mutants containing frameshifts or stop codons. As a proof of principle, we used TDEM to generate mutant lacZalpha lacking alpha-complementation activity and recovered active revertants using a second round of TDEM. Furthermore, a single round of TDEM yielded unique, inactive mutants of ccdB.

Refined annotation and assembly of the Tetrahymena thermophila genome sequence through EST analysis, comparative genomic hybridization, and targeted gap closure

BACKGROUND

Tetrahymena thermophila, a widely studied model for cellular and molecular biology, is a binucleated single-celled organism with a germline micronucleus (MIC) and somatic macronucleus (MAC). The recent draft MAC genome assembly revealed low sequence repetitiveness, a result of the epigenetic removal of invasive DNA elements found only in the MIC genome. Such low repetitiveness makes complete closure of the MAC genome a feasible goal, which to achieve would require standard closure methods as well as removal of minor MIC contamination of the MAC genome assembly. Highly accurate preliminary annotation of Tetrahymena's coding potential was hindered by the lack of both comparative genomic sequence information from close relatives and significant amounts of cDNA evidence, thus limiting the value of the genomic information and also leaving unanswered certain questions, such as the frequency of alternative splicing.

RESULTS

We addressed the problem of MIC contamination using comparative genomic hybridization with purified MIC and MAC DNA probes against a whole genome oligonucleotide microarray, allowing the identification of 763 genome scaffolds likely to contain MIC-limited DNA sequences. We also employed standard genome closure methods to essentially finish over 60% of the MAC genome. For the improvement of annotation, we have sequenced and analyzed over 60,000 verified EST reads from a variety of cellular growth and development conditions. Using this EST evidence, a combination of automated and manual reannotation efforts led to updates that affect 16% of the current protein-coding gene models. By comparing EST abundance, many genes showing apparent differential expression between these conditions were identified. Rare instances of alternative splicing and uses of the non-standard amino acid selenocysteine were also identified.

CONCLUSION

We report here significant progress in genome closure and reannotation of Tetrahymena thermophila. Our experience to date suggests that complete closure of the MAC genome is attainable. Using the new EST evidence, automated and manual curation has resulted in substantial improvements to the over 24,000 gene models, which will be valuable to researchers studying this model organism as well as for comparative genomics purposes.

A novel alpha-galactosidase from Bifidobacterium bifidum with transgalactosylating properties: gene molecular cloning and heterologous expression

A genomic library of Bifidobacterium bifidum (NCIMB 41171) DNA was constructed in Escherichia coli RA11r (melA(-)B(+)) and one alpha-galactosidase encoding gene was isolated. Conceptual translation combined with insertional mutagenesis analysis indicated an open reading frame (ORF) of 759 amino acid (aa) residues encoding an alpha-galactosidase (named as MelA) of 82.8 kDa. Partial purification and characterisation showed that the enzyme had an apparent native molecular mass of approximately 243 kDa and a subunit size of approximately 85 kDa. The enzyme belongs to glycosyl hydrolases 36 family with high aa sequence similarities (approximately 73%) to other known alpha-galactosidases of bifidobacterial origin. Under optimum pH conditions for activity (pH 6.0) and high melibiose concentration (40% w/v), the enzyme was able to form oligosaccharides with degree of polymerisation (DP) > or = 3 at higher concentration than DP = 2, with a total yield of 20.5% (w/w).

Mutagenesis of the cytomegalovirus genome

Bacterial artificial chromosomes (BACs) are DNA molecules assembled in vitro from defined constituents and are stably maintained as one large DNA fragment in Escherichia coli. Artificial chromosomes are useful for genome sequencing programs, for transduction of DNA segments into eukaryotic cells, and for functional characterization of genomic regions and entire viral genomes such as cytomegalovirus (CMV) genomes. CMV genomes in BACs are ready for the advanced tools of E. coli genetics. Homologous and site-specific recombination, or transposon-based approaches allow for the engineering of virtually any kind of genetic change.

Multipurpose transposon insertion libraries for large-scale analysis of gene function in yeast

Transposons have long been recognized as useful laboratory tools facilitating genome-scale studies of gene function. Relative to traditional methods, transposon mutagenesis offers a rapid and economical means of generating large numbers of independent insertions in target DNA through minimal experimental manipulation. In particular, the transposon insertion library described here is an excellent tool for the analysis of gene function on a large scale in the budding yeast Saccharomyces cerevisiae. The transposon utilized in this library is multifunctional, such that the library can be used to screen for disruption phenotypes while also providing a means to generate epitope-tagged alleles and, in many cases, conditional alleles. Provided here are complete protocols by which the transposon insertion library may be used to screen for mutant phenotypes in yeast as well as accompanying protocols describing a means of identifying transposon insertion sites within strains of interest. In total, this insertion library is a singularly useful tool for genome-wide functional analysis, and the general approach is applicable to other organisms in which transforming DNA tends to integrate by homologous recombination.

In vitro mutagenesis of Bacillus subtilis by using a modified Tn7 transposon with an outward-facing inducible promoter

A Tn7 donor plasmid, pTn7SX, was constructed for use with the model gram-positive bacterium Bacillus subtilis. This new mini-Tn7, mTn7SX, contains a spectinomycin resistance cassette and an outward-facing, xylose-inducible promoter, thereby allowing for the regulated expression of genes downstream of the transposon. We demonstrate that mTn7SX inserts are obtained at a high frequency and occur randomly throughout the B. subtilis genome. The utility of this system was demonstrated by the selection of mutants with increased resistance to the antibiotic fosfomycin or duramycin.

Transposon Tn7 directs transposition into the genome of filamentous bacteriophage M13 using the element-encoded TnsE protein

The bacterial transposon Tn7 has a pathway of transposition that preferentially targets conjugal plasmids. We propose that this same transposition pathway recognizes a structure or complex found during filamentous bacteriophage replication, likely by targeting negative-strand synthesis. The ability to insert into both plasmid and bacteriophage DNAs that are capable of cell-to-cell transfer would help explain the wide distribution of Tn7 relatives.

Rapid site-directed domain scanning mutagenesis of enteropathogenic Escherichia coli espD

We developed a rapid mutagenesis method based on a modification of the QuikChange(R) system (Stratagene) to systemically replace endogenous gene sequences with a unique similar size sequence tag. The modifications are as follows: 1: the length of the anchoring homologous sequences of both mutagenesis primers were increased to 16 - 22 bp to achieve melting temperatures greater than 80 degrees C. 2: the final concentrations of both primers were increased to 5-10 ng/microl and the final concentration of template to 1-2 ng/mul. 3: the annealing temperature was adjusted when necessary from 52 degrees C to 58 degrees C. We generated 25 sequential mutants in the cloned espD gene (1.2 kb), which encodes an essential component of the type III secretion translocon required for the pathogenesis of enteropathogenic E. coli (EPEC) infection. Each mutation consisted of the replacement of 15 codons (45 bp) with 8 codons representing a 24 bp sequence containing three unique restriction endonuclease sites (KpnI/MfeI/SpeI) starting from the second codon. The insertion of the restriction endonuclease sites provides a convenient method for further insertions of purification and/or epitope tags into permissive domains. This method is rapid, site-directed and allows for the systematic creation of mutants evenly distributed throughout the entire gene of interest.

Mutational analysis of the N-terminal domain of Moloney murine leukemia virus capsid protein

Retroviral capsid (CA) proteins contain a structurally conserved N-terminal domain (NTD) consisting of a beta-hairpin and six to seven alpha-helices. To examine the role of this domain in Moloney murine leukemia virus (MoMLV) replication, we analyzed 18 insertional mutations in this region. All mutants were noninfectious. Based on the results of this analysis and our previous studies on additional mutations in this domain, we were able to divide the NTD of MoMLV CA into three functional regions. The first functional region included the region near the N terminus that forms the beta-hairpin and was shown to control normal maturation of virions. The second region included the helix 4/5 loop and was essential for the formation of spherical cores. The third region encompassed most of the NTD except for the above loop. Mutants of this region assembled imperfect cores, as seen by detailed electron microscopy analyses, yet the resulting particles were efficiently released from cells. The mutants were defective at a stage immediately following entry of the core into cells. Despite possessing functional reverse transcriptase machinery, these mutant virions did not initiate reverse transcription in cells. This block could be due to structural defects in the assembling core or failure of an essential host protein to interact with the mutant CA protein, both of which may prevent correct disassembly upon entry of the virus into cells. Future studies are needed to understand the mechanism of these blocks and to target these regions pharmacologically to inhibit retroviral infection at additional stages.

Molecular cloning and comparative analysis of four β-galactosidase genes from Bifidobacterium bifidum NCIMB41171

Bifidobacterium bifidum NCIMB41171 carries four genes encoding different beta-galactosidases. One of them, named bbgIII, consisted of an open reading frame of 1,935 amino acid (a.a.) residues encoding a protein with a multidomain structure, commonly identified on cell wall bound enzymes, having a signal peptide, a membrane anchor, FIVAR domains, immunoglobulin Ig-like and discoidin-like domains. The other three genes, termed bbgI, bbgII and bbgIV, encoded proteins of 1,291, 689 and 1,052 a.a. residues, respectively, which were most probably intracellularly located. Two cases of protein evolution between strains of the same species were identified when the a.a. sequences of the BbgI and BbgIII were compared with homologous proteins from B. bifidum DSM20215. The homologous proteins were found to be differentiated at the C-terminal a.a. part either due to a single nucleotide insertion or to a whole DNA sequence insertion, respectively. The bbgIV gene was located in a gene organisation surrounded by divergently transcribed genes putatively for sugar transport (galactoside-symporter) and gene regulation (LacI-transcriptional regulator), a structure that was found to be highly conserved in B. longum, B. adolescentis and B. infantis, suggesting optimal organisation shared amongst those species.

Random screening for dominant-negative mutants of the cytomegalovirus nuclear egress protein M50

Inactivation of gene products by dominant-negative (DN) mutants is a powerful tool to assign functions to proteins. Here, we present a two-step procedure to establish a random screen for DN alleles, using the essential murine cytomegalovirus gene M50 as an example. First, loss-of-function mutants from a linker-scanning library were tested for inhibition of virus reconstitution with the help of FLP-mediated ectopic insertion of the mutants into the viral genome. Second, DN candidates were confirmed by conditional expression of the inhibitory proteins in the virus context. This allowed the quantification of the inhibitory effect, the identification of the morphogenesis block, and the construction of DN mutants with improved activity. Based on these observations a DN mutant of the homologous gene (UL50) in human cytomegalovirus was predicted and constructed. Our data suggest that a proline-rich sequence motif in the variable region of M50/UL50 represents a new functional site which is essential for nuclear egress of cytomegalovirus capsids.

Functional domains of murine cytomegalovirus nuclear egress protein M53/p38

Two conserved herpes simplex virus 1 proteins, UL31 and UL34, form a complex at the inner nuclear membrane which governs primary envelopment and nuclear egress of the herpesvirus nucleocapsids. In mouse cytomegalovirus, a member of the betaherpesvirus subfamily, the homologous proteins M53/p38 and M50/p35 form the nuclear egress complex (NEC). Since the interaction of these proteins is essential for functionality, the definition of the mutual binding sites is a prerequisite for further analysis. Using a comprehensive random mutagenesis procedure, we have mapped the M53/p38 binding site of M50/p35 (A. Bubeck, M. Wagner, Z. Ruzsics, M. Lötzerich, M. Iglesias, I. R. Singh, and U. H. Koszinowski, J. Virol. 78:8026-8035). Here we describe a corresponding analysis for the UL31 homolog M53/p38. A total of 72 individual mutants were reinserted into the genome to test the complementation of the lethal M53 null phenotype. The mutants were also studied for colocalization and for coprecipitation with M50/p35. The analysis revealed that the nonconserved N-terminal one-third of M53/p38 provides the nuclear localization signal as an essential function. The collective results for many mutants localized the binding site for M50/p35 to amino acids (aa) 112 to 137. No single aa exchange for alanine could destroy NEC formation, but virus attenuation revealed a major role for aa K128, Y129, and L130. The lethal phenotype of several insertion and stop mutants indicated the functional importance of the C terminus of the protein.

Revealing domain structure through linker-scanning analysis of the murine leukemia virus (MuLV) RNase H and MuLV and human immunodeficiency virus type 1 integrase proteins

Linker-scanning libraries were generated within the 3' terminus of the Moloney murine leukemia virus (M-MuLV) pol gene encoding the connection-RNase H domains of reverse transcriptase (RT) as well as the structurally related M-MuLV and human immunodeficiency virus type 1 (HIV-1) integrase (IN) proteins. Mutations within the M-MuLV proviral vectors were Tn7 based and resulted in 15-bp insertions. Mutations within an HIV-1 IN bacterial expression vector were based on Tn5 and resulted in 57-bp insertions. The effects of the insertions were examined in vivo (M-MuLV) and in vitro (HIV-1). A total of 178 individual M-MuLV constructs were analyzed; 40 in-frame insertions within RT connection-RNase H, 108 in-frame insertions within IN, 13 insertions encoding stop codons within RNase H, and 17 insertions encoding stop codons within IN. For HIV-1 IN, 56 mutants were analyzed. In both M-MuLV and HIV-1 IN, regions are identified which functionally tolerate multiple-linker insertions. For MuLV, these correspond to the RT-IN proteolytic junction, the junction between the IN core and C terminus, and the C terminus of IN. For HIV-1 IN, in addition to the junction between the IN core and C terminus and the C terminus of IN, insertions between the N terminus and core domains maintained integration and disintegration activity. Of the 40 in-frame insertions within the M-MuLV RT connection-RNase H domains, only the three C-terminal insertions mapping to the RT-IN proteolytic junction were viable. These results correlate with deletion studies mapping the domain and subdomain boundaries of RT and IN. Importantly, these genetic footprints provide a means to identify nonessential regions within RT and IN for targeted gene therapy applications.

Transposon-assisted cloning and traceless mutagenesis of adenoviruses: Development of a novel vector based on species D

Until recently, adenovirus (Ad)-mediated gene therapy was almost exclusively based on human Ad type 5 (Ad5). Preexisting immunity and the limited, coxsackievirus and adenovirus receptor-dependent tropism of Ad5 stimulated attempts to exploit the natural diversity in tropism of the other 50 known human Ad serotypes. Aiming in particular at immunotherapy and vaccination, we have screened representative serotypes from different Ad species for their ability to infect dendritic cells. Ad19a, an Ad from species D, was selected for development as a new vector for vaccination and cancer gene therapy. To clone and manipulate its genome, we have developed a novel methodology, coined "exposon mutagenesis," that allows the rapid and precise introduction of virtually any genetic alteration (deletions, point mutations, or insertions) into recombinant Ad bacterial artificial chromosomes. The versatility of the system was exemplified by deleting the E3 region of Ad19a, by specifically knocking out expression of a species-specific E3 gene, E3/49K, and by reinserting E3/49K into an E3 null Ad19a mutant. The technology requires only limited sequence information and is applicable to other Ad species. Therefore, it should be extremely valuable for the analysis of gene functions from any Ad species. In addition, a basic, replication-defective E1- and E3-deleted Ad19a vector expressing GFP (Ad19aGFP) was generated. This new vector based on species D Ads exhibits a very promising tropism for lymphoid and muscle cells and shows great potential as an alternative vector for transduction of cell types that are resistant to or only poorly transduced by conventional Ad5-based vectors.

In vivo Himar1-based transposon mutagenesis of Francisella tularensis

Francisella tularensis is the intracellular pathogen that causes human tularemia. It is recognized as a potential agent of bioterrorism due to its low infectious dose and multiple routes of entry. We report the development of a Himar1-based random mutagenesis system for F. tularensis (HimarFT). In vivo mutagenesis of F. tularensis live vaccine strain (LVS) with HimarFT occurs at high efficiency. Approximately 12 to 15% of cells transformed with the delivery plasmid result in transposon insertion into the genome. Results from Southern blot analysis of 33 random isolates suggest that single insertions occurred, accompanied by the loss of the plasmid vehicle in most cases. Nucleotide sequence analysis of rescued genomic DNA with HimarFT indicates that the orientation of integration was unbiased and that insertions occurred in open reading frames and intergenic and repetitive regions of the chromosome. To determine the utility of the system, transposon mutagenesis was performed, followed by a screen for growth on Chamberlain's chemically defined medium (CDM) to isolate auxotrophic mutants. Several mutants were isolated that grew on complex but not on the CDM. We genetically complemented two of the mutants for growth on CDM with a newly constructed plasmid containing a nourseothricin resistance marker. In addition, uracil or aromatic amino acid supplementation of CDM supported growth of isolates with insertions in pyrD, carA, or aroE1 supporting the functional assignment of genes within each biosynthetic pathway. A mutant containing an insertion in aroE1 demonstrated delayed replication in macrophages and was restored to the parental growth phenotype when provided with the appropriate plasmid in trans. Our results suggest that a comprehensive library of mutants can be generated in F. tularensis LVS, providing an additional genetic tool to identify virulence determinants required for survival within the host.

Development of a transposon-based approach for identifying novel transgene insertion sites within the replicating adenovirus

Therapeutic gene delivery from an oncolytic adenovirus (Ad) is one approach to enhancing the potency of Ad-based virotherapies for cancer. To identify therapeutic transgene insertion sites compatible with the replicating virus, a methodology that broadly scans the viral genome is needed. To address this we modified a transposon (Tn7)-based in vitro transposition system to take advantage of its nonprejudiced scanning ability to identify insertion sites compatible with viral replication. Using this system with a plasmid containing an E3-deleted Ad5, we identified several unique sites for promoter-based expression cassette insertions within the Ad genome. The transposon-based expression cassette is bounded by PmeI restriction endonuclease sites unique to the transposon, making expression cassette substitutions easy to perform. Additional expression cassettes containing different promoters and reporter genes were substituted into two of the newly identified transgene insertion sites. The results suggest that the ease and orientation of expression cassette substitution depend on both the insertion site location and the promoter and gene of the replacement expression cassette. These studies establish the transposon-based system as an efficient approach to scanning the Ad genome and identifying insertion sites compatible with viral replication and represents a powerful tool for the development of armed therapeutic viruses for cancer.

Genomic analysis of insertion behavior and target specificity of mini-Tn7 and Tn3 transposons in Saccharomyces cerevisiae

Transposons are widely employed as tools for gene disruption. Ideally, they should display unbiased insertion behavior, and incorporate readily into any genomic DNA to which they are exposed. However, many transposons preferentially insert at specific nucleotide sequences. It is unclear to what extent such bias affects their usefulness as mutagenesis tools. Here, we examine insertion site specificity and global insertion behavior of two mini-transposons previously used for large-scale gene disruption in Saccharomyces cerevisiae: Tn3 and Tn7. Using an expanded set of insertion data, we confirm that Tn3 displays marked preference for the AT-rich 5 bp consensus site TA[A/T]TA, whereas Tn7 displays negligible target site preference. On a genome level, both transposons display marked non-uniform insertion behavior: certain sites are targeted far more often than expected, and both distributions depart drastically from Poisson. Thus, to compare their insertion behavior on a genome level, we developed a windowed Kolmogorov–Smirnov (K–S) test to analyze transposon insertion distributions in sequence windows of various sizes. We find that when scored in large windows (>300 bp), both Tn3 and Tn7 distributions appear uniform, whereas in smaller windows, Tn7 appears uniform while Tn3 does not. Thus, both transposons are effective tools for gene disruption, but Tn7 does so with less duplication and a more uniform distribution, better approximating the behavior of the ideal transposon.

Seeking completeness in bacterial mutant hunts

The identification of most or all of the genetic functions that are required for a particular biological process could be achieved through phenotypic studies of high genome-coverage mutant collections. Technologies for creating such collections, in the form of mixed populations or individually arrayed sequence-defined mutants, are now available for numerous bacterial species. The analysis of mixed mutant collections using microarray-based detection procedures appears to be particularly effective in identifying functions required for complex processes such as virulence. The phenotypic analysis of sequence-defined mutant libraries provides a virtually complete identification of nonessential genes required for processes for which suitable screens can be devised. Such libraries also serve as a source of individual mutants for examining the biological relevance of gene associations revealed by transcriptional profiling or homology.

The Tra domain of the lactococcal CluA surface protein is a unique domain that contributes to sex factor DNA transfer

CluA is a cell surface-presented protein that causes cell aggregation and is essential for a high-efficiency conjugation process in Lactococcus lactis. We know from previous work that in addition to promoting cell-to-cell contact, CluA is involved in sex factor DNA transfer. To define the CluA domains involved in aggregation and in transfer, we first performed random mutagenesis of the cluA gene using a modified mini-Tn7 element which generated five amino acid insertions located throughout the encoded protein. Thirty independent cluA insertion mutants expressing modified CluA proteins at the cell surface were isolated and characterized further. The level of aggregation of each mutant was determined. The cell binding capacity of CluA was affected strongly when the protein had a mutation in its N-terminal region, which defined an aggregation domain extending from amino acid 153 to amino acid 483. Of the cluA mutants that still exhibited aggregation, eight showed an attenuated ability to conjugate, and six mutations were located in a 300-amino-acid C-terminal region of the protein defining a transfer domain (Tra). This result was confirmed by a phenotypic analysis of an additional five mutants obtained using site-directed mutagenesis in which charged amino acids of the Tra domain were replaced by alanine residues. Two distinct functional domains of the CluA protein were defined in this work; the first domain is involved in cell binding specificity, and the Tra domain is probably involved in the formation of the DNA transport machinery. This is the first report of a protein involved in conjugation that actively contributes to DNA transfer and mediates contact between donor and recipient strains.

Conditional knockout mice reveal distinct functions for the global transcriptional coactivators CBP and p300 in T-cell development

The global transcriptional coactivators CREB-binding protein (CBP) and the closely related p300 interact with over 312 proteins, making them among the most heavily connected hubs in the known mammalian protein-protein interactome. It is largely uncertain, however, if these interactions are important in specific cell lineages of adult animals, as homozygous null mutations in either CBP or p300 result in early embryonic lethality in mice. Here we describe a Cre/LoxP conditional p300 null allele (p300flox) that allows for the temporal and tissue-specific inactivation of p300. We used mice carrying p300flox and a CBP conditional knockout allele (CBPflox) in conjunction with an Lck-Cre transgene to delete CBP and p300 starting at the CD4- CD8- double-negative thymocyte stage of T-cell development. Loss of either p300 or CBP led to a decrease in CD4+ CD8+ double-positive thymocytes, but an increase in the percentage of CD8+ single-positive thymocytes seen in CBP mutant mice was not observed in p300 mutants. T cells completely lacking both CBP and p300 did not develop normally and were nonexistent or very rare in the periphery, however. T cells lacking CBP or p300 had reduced tumor necrosis factor alpha gene expression in response to phorbol ester and ionophore, while signal-responsive gene expression in CBP- or p300-deficient macrophages was largely intact. Thus, CBP and p300 each supply a surprising degree of redundant coactivation capacity in T cells and macrophages, although each gene has also unique properties in thymocyte development.

Functional analysis of the triplex proteins (VP19C and VP23) of herpes simplex virus type 1

The triplex of herpesvirus capsids is a unique structural element. In herpes simplex virus type 1 (HSV-1), one molecule of VP19C and two of VP23 form a three-pronged structure that acts to stabilize the capsid shell through interactions with adjacent VP5 molecules. The interaction between VP19C and VP23 was inferred by yeast cryoelectron microscopy studies and subsequently confirmed by the two-hybrid assay. In order to define the functional domains of VP19C and VP23, a Tn7-based transposon was used to randomly insert 15 bp into the coding regions of these two proteins. The mutants were initially screened for interaction in the yeast two-hybrid assay to identify the domains important for triplex formation. Using genetic complementation assays in HSV-1-infected cells, the domains of each protein required for virus replication were similarly uncovered. The same mutations that abolish interaction between these two proteins in the yeast two-hybrid assay similarly failed to complement the growth of the VP23- and VP19C-null mutant viruses in the genetic complementation assay. Some of these mutants were transferred into recombinant baculoviruses to analyze the effect of the mutations on herpesvirus capsid assembly in insect cells. The mutations that abolished the interaction in the yeast two-hybrid assay also abolished capsid assembly in insect cells. The outcome of these experiments showed that insertions in at least four regions and especially the amino terminus of VP23 abolished function, whereas the amino terminus of VP19C can tolerate transposon insertions. A novel finding of these studies was the ability to assemble herpesvirus capsids in insect cells using VP5 and VP19C that contained a histidine handle at their amino terminus.

Gene disruption in Cryptococcus neoformans and Cryptococcus gattii by in vitro transposition

Cryptococcus neoformans and Cryptococcus gattii are basidiomycetous fungi that infect immunocompromised and immunocompetent people. We developed an insertional mutagenesis strategy for these species based on in vitro transposition and we tested the method by disrupting the URA5 gene in a strain of C. neoformans and the CAP10 gene in three strains of C. gattii. We targeted plasmid DNA containing the URA5 gene or plasmid DNA containing the CAP10 gene from genomic libraries from the shotgun sequencing project for the C. gatti strain WM276. In the latter case, the availability of the end sequences of the clones from the assembled genomic sequence allows rapid selection of target genes for disruption. Modified transposons containing the nourseothricin (NAT) or neomycin (Neo) resistance cassettes were randomly inserted into the target DNA by in vitro transposition. The disrupted genes were used for biolistic transformation and homologous integration was subsequently confirmed by PCR and Southern blot analysis. These results demonstrate that the emerging genomic resources, combined with in vitro transposition into plasmid DNAs from shotgun sequencing libraries or cloned PCR products, will facilitate high-throughput genetic analysis in Cryptococcus species.